linux_dsm_epyc7002/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
Fabio Estevam edc0581978 ARM: dts: imx6: Pass memory unit-adress
Pass the memory unit-adress to fix the following build warnings with W=1:

Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name

There are cases where dts passes an empty memory node, which will be filled
by the bootloader. Passing the memory base address still allows the
bootloader to fill the memory size.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-By: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-28 09:48:05 +08:00

66 lines
1.3 KiB
Plaintext

// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Copyright 2018 Toradex AG
*/
#include "imx6ull-colibri.dtsi"
/ {
memory@80000000 {
reg = <0x80000000 0x20000000>;
};
wifi_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_snvs_wifi_pdn>;
reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
};
};
&cpu0 {
clock-frequency = <792000000>;
operating-points = <
/* kHz uV */
792000 1225000
528000 1175000
396000 1025000
198000 950000
>;
fsl,soc-operating-points = <
/* KHz uV */
792000 1175000
528000 1175000
396000 1175000
198000 1175000
>;
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3
&pinctrl_gpio4 &pinctrl_gpio5>;
};
&iomuxc_snvs {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_snvs_gpio1 &pinctrl_snvs_gpio2>;
};
&usdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
assigned-clocks = <&clks IMX6UL_CLK_USDHC2_SEL>, <&clks IMX6UL_CLK_USDHC2>;
assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>;
assigned-clock-rates = <0>, <198000000>;
cap-power-off-card;
keep-power-in-suspend;
mmc-pwrseq = <&wifi_pwrseq>;
no-1-8-v;
non-removable;
vmmc-supply = <&reg_module_3v3>;
wakeup-source;
status = "okay";
};