mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-12 14:26:40 +07:00
a5597008db
An SFP module may have a link up/down status pin which can be connection to a GPIO line of the host. Add support for reading such an GPIO in the fixed_phy driver. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
55 lines
1.6 KiB
Plaintext
55 lines
1.6 KiB
Plaintext
Fixed link Device Tree binding
|
|
------------------------------
|
|
|
|
Some Ethernet MACs have a "fixed link", and are not connected to a
|
|
normal MDIO-managed PHY device. For those situations, a Device Tree
|
|
binding allows to describe a "fixed link".
|
|
|
|
Such a fixed link situation is described by creating a 'fixed-link'
|
|
sub-node of the Ethernet MAC device node, with the following
|
|
properties:
|
|
|
|
* 'speed' (integer, mandatory), to indicate the link speed. Accepted
|
|
values are 10, 100 and 1000
|
|
* 'full-duplex' (boolean, optional), to indicate that full duplex is
|
|
used. When absent, half duplex is assumed.
|
|
* 'pause' (boolean, optional), to indicate that pause should be
|
|
enabled.
|
|
* 'asym-pause' (boolean, optional), to indicate that asym_pause should
|
|
be enabled.
|
|
* 'link-gpios' ('gpio-list', optional), to indicate if a gpio can be read
|
|
to determine if the link is up.
|
|
|
|
Old, deprecated 'fixed-link' binding:
|
|
|
|
* A 'fixed-link' property in the Ethernet MAC node, with 5 cells, of the
|
|
form <a b c d e> with the following accepted values:
|
|
- a: emulated PHY ID, choose any but but unique to the all specified
|
|
fixed-links, from 0 to 31
|
|
- b: duplex configuration: 0 for half duplex, 1 for full duplex
|
|
- c: link speed in Mbits/sec, accepted values are: 10, 100 and 1000
|
|
- d: pause configuration: 0 for no pause, 1 for pause
|
|
- e: asymmetric pause configuration: 0 for no asymmetric pause, 1 for
|
|
asymmetric pause
|
|
|
|
Examples:
|
|
|
|
ethernet@0 {
|
|
...
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
...
|
|
};
|
|
|
|
ethernet@1 {
|
|
...
|
|
fixed-link {
|
|
speed = <1000>;
|
|
pause;
|
|
link-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
...
|
|
};
|