linux_dsm_epyc7002/drivers/input/rmi4/rmi_driver.h
Andrew Duggan 562b42d3ee Input: synaptics-rmi4 - add support for F30
RMI4 F30 supports input from clickpad buttons and controls LEDs located
on the touchpad PCB. This patch adds support of the clickpad buttons and
defers supporting LEDs for the future.

Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-10 16:04:23 -08:00

106 lines
2.9 KiB
C

/*
* Copyright (c) 2011-2016 Synaptics Incorporated
* Copyright (c) 2011 Unixphere
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
#ifndef _RMI_DRIVER_H
#define _RMI_DRIVER_H
#include <linux/ctype.h>
#include <linux/hrtimer.h>
#include <linux/ktime.h>
#include <linux/input.h>
#include "rmi_bus.h"
#define RMI_DRIVER_VERSION "2.0"
#define SYNAPTICS_INPUT_DEVICE_NAME "Synaptics RMI4 Touch Sensor"
#define SYNAPTICS_VENDOR_ID 0x06cb
#define GROUP(_attrs) { \
.attrs = _attrs, \
}
#define PDT_PROPERTIES_LOCATION 0x00EF
#define BSR_LOCATION 0x00FE
#define RMI_PDT_PROPS_HAS_BSR 0x02
#define NAME_BUFFER_SIZE 256
#define RMI_PDT_ENTRY_SIZE 6
#define RMI_PDT_FUNCTION_VERSION_MASK 0x60
#define RMI_PDT_INT_SOURCE_COUNT_MASK 0x07
#define PDT_START_SCAN_LOCATION 0x00e9
#define PDT_END_SCAN_LOCATION 0x0005
#define RMI4_END_OF_PDT(id) ((id) == 0x00 || (id) == 0xff)
struct pdt_entry {
u16 page_start;
u8 query_base_addr;
u8 command_base_addr;
u8 control_base_addr;
u8 data_base_addr;
u8 interrupt_source_count;
u8 function_version;
u8 function_number;
};
int rmi_read_pdt_entry(struct rmi_device *rmi_dev, struct pdt_entry *entry,
u16 pdt_address);
#define RMI_REG_DESC_PRESENSE_BITS (32 * BITS_PER_BYTE)
#define RMI_REG_DESC_SUBPACKET_BITS (37 * BITS_PER_BYTE)
/* describes a single packet register */
struct rmi_register_desc_item {
u16 reg;
unsigned long reg_size;
u8 num_subpackets;
unsigned long subpacket_map[BITS_TO_LONGS(
RMI_REG_DESC_SUBPACKET_BITS)];
};
/*
* describes the packet registers for a particular type
* (ie query, control, data)
*/
struct rmi_register_descriptor {
unsigned long struct_size;
unsigned long presense_map[BITS_TO_LONGS(RMI_REG_DESC_PRESENSE_BITS)];
u8 num_registers;
struct rmi_register_desc_item *registers;
};
int rmi_read_register_desc(struct rmi_device *d, u16 addr,
struct rmi_register_descriptor *rdesc);
const struct rmi_register_desc_item *rmi_get_register_desc_item(
struct rmi_register_descriptor *rdesc, u16 reg);
/*
* Calculate the total size of all of the registers described in the
* descriptor.
*/
size_t rmi_register_desc_calc_size(struct rmi_register_descriptor *rdesc);
int rmi_register_desc_calc_reg_offset(
struct rmi_register_descriptor *rdesc, u16 reg);
bool rmi_register_desc_has_subpacket(const struct rmi_register_desc_item *item,
u8 subpacket);
bool rmi_is_physical_driver(struct device_driver *);
int rmi_register_physical_driver(void);
void rmi_unregister_physical_driver(void);
char *rmi_f01_get_product_ID(struct rmi_function *fn);
extern struct rmi_function_handler rmi_f01_handler;
extern struct rmi_function_handler rmi_f11_handler;
extern struct rmi_function_handler rmi_f12_handler;
extern struct rmi_function_handler rmi_f30_handler;
#endif