mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-09 01:36:39 +07:00
b06d43f7a3
Add I2C driver for Atmel Capacitive Touch Button device. Signed-off-by: Hung-yu Wu <hywu@google.com> Signed-off-by: Grant Grundler <grundler@chromium.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
291 lines
7.5 KiB
C
291 lines
7.5 KiB
C
/*
|
|
* Atmel Atmegaxx Capacitive Touch Button Driver
|
|
*
|
|
* Copyright (C) 2016 Google, inc.
|
|
*
|
|
* This software is licensed under the terms of the GNU General Public
|
|
* License version 2, as published by the Free Software Foundation, and
|
|
* may be copied, distributed, and modified under those terms.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
/*
|
|
* It's irrelevant that the HW used to develop captouch driver is based
|
|
* on Atmega88PA part and uses QtouchADC parts for sensing touch.
|
|
* Calling this driver "captouch" is an arbitrary way to distinguish
|
|
* the protocol this driver supported by other atmel/qtouch drivers.
|
|
*
|
|
* Captouch driver supports a newer/different version of the I2C
|
|
* registers/commands than the qt1070.c driver.
|
|
* Don't let the similarity of the general driver structure fool you.
|
|
*
|
|
* For raw i2c access from userspace, use i2cset/i2cget
|
|
* to poke at /dev/i2c-N devices.
|
|
*/
|
|
|
|
#include <linux/device.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/input.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/slab.h>
|
|
|
|
/* Maximum number of buttons supported */
|
|
#define MAX_NUM_OF_BUTTONS 8
|
|
|
|
/* Registers */
|
|
#define REG_KEY1_THRESHOLD 0x02
|
|
#define REG_KEY2_THRESHOLD 0x03
|
|
#define REG_KEY3_THRESHOLD 0x04
|
|
#define REG_KEY4_THRESHOLD 0x05
|
|
|
|
#define REG_KEY1_REF_H 0x20
|
|
#define REG_KEY1_REF_L 0x21
|
|
#define REG_KEY2_REF_H 0x22
|
|
#define REG_KEY2_REF_L 0x23
|
|
#define REG_KEY3_REF_H 0x24
|
|
#define REG_KEY3_REF_L 0x25
|
|
#define REG_KEY4_REF_H 0x26
|
|
#define REG_KEY4_REF_L 0x27
|
|
|
|
#define REG_KEY1_DLT_H 0x30
|
|
#define REG_KEY1_DLT_L 0x31
|
|
#define REG_KEY2_DLT_H 0x32
|
|
#define REG_KEY2_DLT_L 0x33
|
|
#define REG_KEY3_DLT_H 0x34
|
|
#define REG_KEY3_DLT_L 0x35
|
|
#define REG_KEY4_DLT_H 0x36
|
|
#define REG_KEY4_DLT_L 0x37
|
|
|
|
#define REG_KEY_STATE 0x3C
|
|
|
|
/*
|
|
* @i2c_client: I2C slave device client pointer
|
|
* @input: Input device pointer
|
|
* @num_btn: Number of buttons
|
|
* @keycodes: map of button# to KeyCode
|
|
* @prev_btn: Previous key state to detect button "press" or "release"
|
|
* @xfer_buf: I2C transfer buffer
|
|
*/
|
|
struct atmel_captouch_device {
|
|
struct i2c_client *client;
|
|
struct input_dev *input;
|
|
u32 num_btn;
|
|
u32 keycodes[MAX_NUM_OF_BUTTONS];
|
|
u8 prev_btn;
|
|
u8 xfer_buf[8] ____cacheline_aligned;
|
|
};
|
|
|
|
/*
|
|
* Read from I2C slave device
|
|
* The protocol is that the client has to provide both the register address
|
|
* and the length, and while reading back the device would prepend the data
|
|
* with address and length for verification.
|
|
*/
|
|
static int atmel_read(struct atmel_captouch_device *capdev,
|
|
u8 reg, u8 *data, size_t len)
|
|
{
|
|
struct i2c_client *client = capdev->client;
|
|
struct device *dev = &client->dev;
|
|
struct i2c_msg msg[2];
|
|
int err;
|
|
|
|
if (len > sizeof(capdev->xfer_buf) - 2)
|
|
return -EINVAL;
|
|
|
|
capdev->xfer_buf[0] = reg;
|
|
capdev->xfer_buf[1] = len;
|
|
|
|
msg[0].addr = client->addr;
|
|
msg[0].flags = 0;
|
|
msg[0].buf = capdev->xfer_buf;
|
|
msg[0].len = 2;
|
|
|
|
msg[1].addr = client->addr;
|
|
msg[1].flags = I2C_M_RD;
|
|
msg[1].buf = capdev->xfer_buf;
|
|
msg[1].len = len + 2;
|
|
|
|
err = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg));
|
|
if (err != ARRAY_SIZE(msg))
|
|
return err < 0 ? err : -EIO;
|
|
|
|
if (capdev->xfer_buf[0] != reg) {
|
|
dev_err(dev,
|
|
"I2C read error: register address does not match (%#02x vs %02x)\n",
|
|
capdev->xfer_buf[0], reg);
|
|
return -ECOMM;
|
|
}
|
|
|
|
memcpy(data, &capdev->xfer_buf[2], len);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Handle interrupt and report the key changes to the input system.
|
|
* Multi-touch can be supported; however, it really depends on whether
|
|
* the device can multi-touch.
|
|
*/
|
|
static irqreturn_t atmel_captouch_isr(int irq, void *data)
|
|
{
|
|
struct atmel_captouch_device *capdev = data;
|
|
struct device *dev = &capdev->client->dev;
|
|
int error;
|
|
int i;
|
|
u8 new_btn;
|
|
u8 changed_btn;
|
|
|
|
error = atmel_read(capdev, REG_KEY_STATE, &new_btn, 1);
|
|
if (error) {
|
|
dev_err(dev, "failed to read button state: %d\n", error);
|
|
goto out;
|
|
}
|
|
|
|
dev_dbg(dev, "%s: button state %#02x\n", __func__, new_btn);
|
|
|
|
changed_btn = new_btn ^ capdev->prev_btn;
|
|
capdev->prev_btn = new_btn;
|
|
|
|
for (i = 0; i < capdev->num_btn; i++) {
|
|
if (changed_btn & BIT(i))
|
|
input_report_key(capdev->input,
|
|
capdev->keycodes[i],
|
|
new_btn & BIT(i));
|
|
}
|
|
|
|
input_sync(capdev->input);
|
|
|
|
out:
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/*
|
|
* Probe function to setup the device, input system and interrupt
|
|
*/
|
|
static int atmel_captouch_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct atmel_captouch_device *capdev;
|
|
struct device *dev = &client->dev;
|
|
struct device_node *node;
|
|
int i;
|
|
int err;
|
|
|
|
if (!i2c_check_functionality(client->adapter,
|
|
I2C_FUNC_SMBUS_BYTE_DATA |
|
|
I2C_FUNC_SMBUS_WORD_DATA |
|
|
I2C_FUNC_SMBUS_I2C_BLOCK)) {
|
|
dev_err(dev, "needed i2c functionality is not supported\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
capdev = devm_kzalloc(dev, sizeof(*capdev), GFP_KERNEL);
|
|
if (!capdev)
|
|
return -ENOMEM;
|
|
|
|
capdev->client = client;
|
|
i2c_set_clientdata(client, capdev);
|
|
|
|
err = atmel_read(capdev, REG_KEY_STATE,
|
|
&capdev->prev_btn, sizeof(capdev->prev_btn));
|
|
if (err) {
|
|
dev_err(dev, "failed to read initial button state: %d\n", err);
|
|
return err;
|
|
}
|
|
|
|
capdev->input = devm_input_allocate_device(dev);
|
|
if (!capdev->input) {
|
|
dev_err(dev, "failed to allocate input device\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
capdev->input->id.bustype = BUS_I2C;
|
|
capdev->input->id.product = 0x880A;
|
|
capdev->input->id.version = 0;
|
|
capdev->input->name = "ATMegaXX Capacitive Button Controller";
|
|
__set_bit(EV_KEY, capdev->input->evbit);
|
|
|
|
node = dev->of_node;
|
|
if (!node) {
|
|
dev_err(dev, "failed to find matching node in device tree\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (of_property_read_bool(node, "autorepeat"))
|
|
__set_bit(EV_REP, capdev->input->evbit);
|
|
|
|
capdev->num_btn = of_property_count_u32_elems(node, "linux,keymap");
|
|
if (capdev->num_btn > MAX_NUM_OF_BUTTONS)
|
|
capdev->num_btn = MAX_NUM_OF_BUTTONS;
|
|
|
|
err = of_property_read_u32_array(node, "linux,keycodes",
|
|
capdev->keycodes,
|
|
capdev->num_btn);
|
|
if (err) {
|
|
dev_err(dev,
|
|
"failed to read linux,keycode property: %d\n", err);
|
|
return err;
|
|
}
|
|
|
|
for (i = 0; i < capdev->num_btn; i++)
|
|
__set_bit(capdev->keycodes[i], capdev->input->keybit);
|
|
|
|
capdev->input->keycode = capdev->keycodes;
|
|
capdev->input->keycodesize = sizeof(capdev->keycodes[0]);
|
|
capdev->input->keycodemax = capdev->num_btn;
|
|
|
|
err = input_register_device(capdev->input);
|
|
if (err)
|
|
return err;
|
|
|
|
err = devm_request_threaded_irq(dev, client->irq,
|
|
NULL, atmel_captouch_isr,
|
|
IRQF_ONESHOT,
|
|
"atmel_captouch", capdev);
|
|
if (err) {
|
|
dev_err(dev, "failed to request irq %d: %d\n",
|
|
client->irq, err);
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id atmel_captouch_of_id[] = {
|
|
{
|
|
.compatible = "atmel,captouch",
|
|
},
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, atmel_captouch_of_id);
|
|
#endif
|
|
|
|
static const struct i2c_device_id atmel_captouch_id[] = {
|
|
{ "atmel_captouch", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, atmel_captouch_id);
|
|
|
|
static struct i2c_driver atmel_captouch_driver = {
|
|
.probe = atmel_captouch_probe,
|
|
.id_table = atmel_captouch_id,
|
|
.driver = {
|
|
.name = "atmel_captouch",
|
|
.of_match_table = of_match_ptr(atmel_captouch_of_id),
|
|
},
|
|
};
|
|
module_i2c_driver(atmel_captouch_driver);
|
|
|
|
/* Module information */
|
|
MODULE_AUTHOR("Hung-yu Wu <hywu@google.com>");
|
|
MODULE_DESCRIPTION("Atmel ATmegaXX Capacitance Touch Sensor I2C Driver");
|
|
MODULE_LICENSE("GPL v2");
|