Bruce Allan d9b24135b9 e1000e: disable far-end loopback mode on ESB2 ... The ESB2 LAN includes a debug feature that enables far-end loopback (FELB) of the SerDes/Kumeran interface. This feature is activated when receiving a sequence of symbols that includes a reserved codeword. On a perfect link, FELB would never be activated. In the presence of bit errors, there is a very small, but non-zero, probability of FELB being activated. If the FELB is activated, the SerDes link becomes non-functional and must be reset. It could also corrupt the switching tables in the switch since the ESB2 is transmitting packets with a different source MAC address. This patch disables the FELB feature. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>		2011-06-09 20:31:24 -07:00
..
82571.c	e1000e: implement ethtool set_phys_id	2011-04-27 02:05:53 -07:00
defines.h	e1000e: disable jumbo frames on 82579 when MACsec enabled in EEPROM	2011-03-11 02:23:21 -08:00
e1000.h	e1000e: implement ethtool set_phys_id	2011-04-27 02:05:53 -07:00
es2lan.c	e1000e: disable far-end loopback mode on ESB2	2011-06-09 20:31:24 -07:00
ethtool.c	net: remove interrupt.h inclusion from netdevice.h	2011-06-06 22:55:11 -07:00
hw.h	e1000e: disable far-end loopback mode on ESB2	2011-06-09 20:31:24 -07:00
ich8lan.c	e1000e: implement ethtool set_phys_id	2011-04-27 02:05:53 -07:00
lib.c	e1000e: minor comment cleanups	2011-05-14 17:50:01 -07:00
Makefile	e1000e: update Copyright for 2011	2011-01-14 02:04:01 -08:00
netdev.c	net: remove interrupt.h inclusion from netdevice.h	2011-06-06 22:55:11 -07:00
param.c	e1000e: consistent use of Rx/Tx vs. RX/TX/rx/tx in comments/logs	2011-01-14 02:06:23 -08:00
phy.c	e1000e: convert short duration msleep() to usleep_range()	2011-04-13 19:17:06 -07:00