mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-27 12:55:04 +07:00
12de44f55d
The FEC driver ignores the GPIO polarity from 'phy-reset-gpios' and considers that the Ethernet PHY is active low, unless the property 'phy-reset-active-high' is present. Fix the device tree description by explicitly passing the 'GPIO_ACTIVE_LOW' flag to the 'phy-reset-gpios' property. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
277 lines
6.4 KiB
Plaintext
277 lines
6.4 KiB
Plaintext
/*
|
|
* Copyright 2013 Rostislav Lisovy <lisovy@gmail.com>, PiKRON s.r.o.
|
|
*
|
|
* The code contained herein is licensed under the GNU General Public
|
|
* License. You may obtain a copy of the GNU General Public License
|
|
* Version 2 or later at the following locations:
|
|
*
|
|
* http://www.opensource.org/licenses/gpl-license.html
|
|
* http://www.gnu.org/copyleft/gpl.html
|
|
*/
|
|
|
|
#include "imx53.dtsi"
|
|
|
|
/ {
|
|
model = "Voipac i.MX53 X53-DMM-668";
|
|
compatible = "voipac,imx53-dmm-668", "fsl,imx53";
|
|
|
|
memory@70000000 {
|
|
device_type = "memory";
|
|
reg = <0x70000000 0x20000000>;
|
|
};
|
|
|
|
memory@b0000000 {
|
|
device_type = "memory";
|
|
reg = <0xb0000000 0x20000000>;
|
|
};
|
|
|
|
regulators {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
reg_3p3v: regulator@0 {
|
|
compatible = "regulator-fixed";
|
|
reg = <0>;
|
|
regulator-name = "3P3V";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_usb_vbus: regulator@1 {
|
|
compatible = "regulator-fixed";
|
|
reg = <1>;
|
|
regulator-name = "usb_vbus";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
gpio = <&gpio3 31 0>; /* PEN */
|
|
enable-active-high;
|
|
};
|
|
};
|
|
};
|
|
|
|
&iomuxc {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_hog>;
|
|
|
|
imx53-voipac {
|
|
pinctrl_hog: hoggrp {
|
|
fsl,pins = <
|
|
/* Make DA9053 regulator functional */
|
|
MX53_PAD_GPIO_16__GPIO7_11 0x80000000
|
|
/* FEC Power enable */
|
|
MX53_PAD_GPIO_11__GPIO4_1 0x80000000
|
|
/* FEC RST */
|
|
MX53_PAD_GPIO_12__GPIO4_2 0x80000000
|
|
>;
|
|
};
|
|
|
|
pinctrl_ecspi1: ecspi1grp {
|
|
fsl,pins = <
|
|
MX53_PAD_EIM_D16__ECSPI1_SCLK 0x80000000
|
|
MX53_PAD_EIM_D17__ECSPI1_MISO 0x80000000
|
|
MX53_PAD_EIM_D18__ECSPI1_MOSI 0x80000000
|
|
>;
|
|
};
|
|
|
|
pinctrl_fec: fecgrp {
|
|
fsl,pins = <
|
|
MX53_PAD_FEC_MDC__FEC_MDC 0x80000000
|
|
MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000
|
|
MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000
|
|
MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000
|
|
MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000
|
|
MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000
|
|
MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000
|
|
MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
|
|
MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000
|
|
MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c1: i2c1grp {
|
|
fsl,pins = <
|
|
MX53_PAD_EIM_D21__I2C1_SCL 0xc0000000
|
|
MX53_PAD_EIM_D28__I2C1_SDA 0xc0000000
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart1: uart1grp {
|
|
fsl,pins = <
|
|
MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4
|
|
MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4
|
|
>;
|
|
};
|
|
|
|
pinctrl_nand: nandgrp {
|
|
fsl,pins = <
|
|
MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B 0x4
|
|
MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B 0x4
|
|
MX53_PAD_NANDF_CLE__EMI_NANDF_CLE 0x4
|
|
MX53_PAD_NANDF_ALE__EMI_NANDF_ALE 0x4
|
|
MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B 0xe0
|
|
MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 0xe0
|
|
MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 0x4
|
|
MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 0xa4
|
|
MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 0xa4
|
|
MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 0xa4
|
|
MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 0xa4
|
|
MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 0xa4
|
|
MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 0xa4
|
|
MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 0xa4
|
|
MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 0xa4
|
|
>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&ecspi1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_ecspi1>;
|
|
cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>, <&gpio2 16 0>, <&gpio2 17 0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&fec {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_fec>;
|
|
phy-mode = "rmii";
|
|
phy-reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c1>;
|
|
status = "okay";
|
|
|
|
pmic: dialog@48 {
|
|
compatible = "dlg,da9053-aa", "dlg,da9052";
|
|
reg = <0x48>;
|
|
interrupt-parent = <&gpio7>;
|
|
interrupts = <11 0x8>; /* low-level active IRQ at GPIO7_11 */
|
|
|
|
regulators {
|
|
buck1_reg: buck1 {
|
|
regulator-name = "BUCKCORE";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1400000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
buck2_reg: buck2 {
|
|
regulator-name = "BUCKPRO";
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
buck3_reg: buck3 {
|
|
regulator-name = "BUCKMEM";
|
|
regulator-min-microvolt = <1420000>;
|
|
regulator-max-microvolt = <1580000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
buck4_reg: buck4 {
|
|
regulator-name = "BUCKPERI";
|
|
regulator-min-microvolt = <2370000>;
|
|
regulator-max-microvolt = <2630000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo1_reg: ldo1 {
|
|
regulator-name = "ldo1_1v3";
|
|
regulator-min-microvolt = <1250000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo2_reg: ldo2 {
|
|
regulator-name = "ldo2_1v3";
|
|
regulator-min-microvolt = <1250000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo3_reg: ldo3 {
|
|
regulator-name = "ldo3_3v3";
|
|
regulator-min-microvolt = <3250000>;
|
|
regulator-max-microvolt = <3350000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo4_reg: ldo4 {
|
|
regulator-name = "ldo4_2v775";
|
|
regulator-min-microvolt = <2770000>;
|
|
regulator-max-microvolt = <2780000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo5_reg: ldo5 {
|
|
regulator-name = "ldo5_3v3";
|
|
regulator-min-microvolt = <3250000>;
|
|
regulator-max-microvolt = <3350000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo6_reg: ldo6 {
|
|
regulator-name = "ldo6_1v3";
|
|
regulator-min-microvolt = <1250000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo7_reg: ldo7 {
|
|
regulator-name = "ldo7_2v75";
|
|
regulator-min-microvolt = <2700000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo8_reg: ldo8 {
|
|
regulator-name = "ldo8_1v8";
|
|
regulator-min-microvolt = <1750000>;
|
|
regulator-max-microvolt = <1850000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo9_reg: ldo9 {
|
|
regulator-name = "ldo9_1v5";
|
|
regulator-min-microvolt = <1450000>;
|
|
regulator-max-microvolt = <1550000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo10_reg: ldo10 {
|
|
regulator-name = "ldo10_1v3";
|
|
regulator-min-microvolt = <1250000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&nfc {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_nand>;
|
|
nand-bus-width = <8>;
|
|
nand-ecc-mode = "hw";
|
|
status = "okay";
|
|
};
|
|
|
|
&uart1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbh1 {
|
|
vbus-supply = <®_usb_vbus>;
|
|
phy_type = "utmi";
|
|
status = "okay";
|
|
};
|