linux_dsm_epyc7002/drivers/clocksource/time-lpc32xx.c
Daniel Lezcano 1727339590 clocksource/drivers: Rename CLOCKSOURCE_OF_DECLARE to TIMER_OF_DECLARE
The CLOCKSOURCE_OF_DECLARE macro is used widely for the timers to declare the
clocksource at early stage. However, this macro is also used to initialize
the clockevent if any, or the clockevent only.

It was originally suggested to declare another macro to initialize a
clockevent, so in order to separate the two entities even they belong to the
same IP. This was not accepted because of the impact on the DT where splitting
a clocksource/clockevent definition does not make sense as it is a Linux
concept not a hardware description.

On the other side, the clocksource has not interrupt declared while the
clockevent has, so it is easy from the driver to know if the description is
for a clockevent or a clocksource, IOW it could be implemented at the driver
level.

So instead of dealing with a named clocksource macro, let's use a more generic
one: TIMER_OF_DECLARE.

The patch has not functional changes.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-14 11:58:45 +02:00

315 lines
8.1 KiB
C

/*
* Clocksource driver for NXP LPC32xx/18xx/43xx timer
*
* Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com>
*
* Based on:
* time-efm32 Copyright (C) 2013 Pengutronix
* mach-lpc32xx/timer.c Copyright (C) 2009 - 2010 NXP Semiconductors
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*
*/
#define pr_fmt(fmt) "%s: " fmt, __func__
#include <linux/clk.h>
#include <linux/clockchips.h>
#include <linux/clocksource.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/sched_clock.h>
#define LPC32XX_TIMER_IR 0x000
#define LPC32XX_TIMER_IR_MR0INT BIT(0)
#define LPC32XX_TIMER_TCR 0x004
#define LPC32XX_TIMER_TCR_CEN BIT(0)
#define LPC32XX_TIMER_TCR_CRST BIT(1)
#define LPC32XX_TIMER_TC 0x008
#define LPC32XX_TIMER_PR 0x00c
#define LPC32XX_TIMER_MCR 0x014
#define LPC32XX_TIMER_MCR_MR0I BIT(0)
#define LPC32XX_TIMER_MCR_MR0R BIT(1)
#define LPC32XX_TIMER_MCR_MR0S BIT(2)
#define LPC32XX_TIMER_MR0 0x018
#define LPC32XX_TIMER_CTCR 0x070
struct lpc32xx_clock_event_ddata {
struct clock_event_device evtdev;
void __iomem *base;
u32 ticks_per_jiffy;
};
/* Needed for the sched clock */
static void __iomem *clocksource_timer_counter;
static u64 notrace lpc32xx_read_sched_clock(void)
{
return readl(clocksource_timer_counter);
}
static unsigned long lpc32xx_delay_timer_read(void)
{
return readl(clocksource_timer_counter);
}
static struct delay_timer lpc32xx_delay_timer = {
.read_current_timer = lpc32xx_delay_timer_read,
};
static int lpc32xx_clkevt_next_event(unsigned long delta,
struct clock_event_device *evtdev)
{
struct lpc32xx_clock_event_ddata *ddata =
container_of(evtdev, struct lpc32xx_clock_event_ddata, evtdev);
/*
* Place timer in reset and program the delta in the match
* channel 0 (MR0). When the timer counter matches the value
* in MR0 register the match will trigger an interrupt.
* After setup the timer is released from reset and enabled.
*/
writel_relaxed(LPC32XX_TIMER_TCR_CRST, ddata->base + LPC32XX_TIMER_TCR);
writel_relaxed(delta, ddata->base + LPC32XX_TIMER_MR0);
writel_relaxed(LPC32XX_TIMER_TCR_CEN, ddata->base + LPC32XX_TIMER_TCR);
return 0;
}
static int lpc32xx_clkevt_shutdown(struct clock_event_device *evtdev)
{
struct lpc32xx_clock_event_ddata *ddata =
container_of(evtdev, struct lpc32xx_clock_event_ddata, evtdev);
/* Disable the timer */
writel_relaxed(0, ddata->base + LPC32XX_TIMER_TCR);
return 0;
}
static int lpc32xx_clkevt_oneshot(struct clock_event_device *evtdev)
{
struct lpc32xx_clock_event_ddata *ddata =
container_of(evtdev, struct lpc32xx_clock_event_ddata, evtdev);
/*
* When using oneshot, we must also disable the timer
* to wait for the first call to set_next_event().
*/
writel_relaxed(0, ddata->base + LPC32XX_TIMER_TCR);
/* Enable interrupt, reset on match and stop on match (MCR). */
writel_relaxed(LPC32XX_TIMER_MCR_MR0I | LPC32XX_TIMER_MCR_MR0R |
LPC32XX_TIMER_MCR_MR0S, ddata->base + LPC32XX_TIMER_MCR);
return 0;
}
static int lpc32xx_clkevt_periodic(struct clock_event_device *evtdev)
{
struct lpc32xx_clock_event_ddata *ddata =
container_of(evtdev, struct lpc32xx_clock_event_ddata, evtdev);
/* Enable interrupt and reset on match. */
writel_relaxed(LPC32XX_TIMER_MCR_MR0I | LPC32XX_TIMER_MCR_MR0R,
ddata->base + LPC32XX_TIMER_MCR);
/*
* Place timer in reset and program the delta in the match
* channel 0 (MR0).
*/
writel_relaxed(LPC32XX_TIMER_TCR_CRST, ddata->base + LPC32XX_TIMER_TCR);
writel_relaxed(ddata->ticks_per_jiffy, ddata->base + LPC32XX_TIMER_MR0);
writel_relaxed(LPC32XX_TIMER_TCR_CEN, ddata->base + LPC32XX_TIMER_TCR);
return 0;
}
static irqreturn_t lpc32xx_clock_event_handler(int irq, void *dev_id)
{
struct lpc32xx_clock_event_ddata *ddata = dev_id;
/* Clear match on channel 0 */
writel_relaxed(LPC32XX_TIMER_IR_MR0INT, ddata->base + LPC32XX_TIMER_IR);
ddata->evtdev.event_handler(&ddata->evtdev);
return IRQ_HANDLED;
}
static struct lpc32xx_clock_event_ddata lpc32xx_clk_event_ddata = {
.evtdev = {
.name = "lpc3220 clockevent",
.features = CLOCK_EVT_FEAT_ONESHOT |
CLOCK_EVT_FEAT_PERIODIC,
.rating = 300,
.set_next_event = lpc32xx_clkevt_next_event,
.set_state_shutdown = lpc32xx_clkevt_shutdown,
.set_state_oneshot = lpc32xx_clkevt_oneshot,
.set_state_periodic = lpc32xx_clkevt_periodic,
},
};
static int __init lpc32xx_clocksource_init(struct device_node *np)
{
void __iomem *base;
unsigned long rate;
struct clk *clk;
int ret;
clk = of_clk_get_by_name(np, "timerclk");
if (IS_ERR(clk)) {
pr_err("clock get failed (%ld)\n", PTR_ERR(clk));
return PTR_ERR(clk);
}
ret = clk_prepare_enable(clk);
if (ret) {
pr_err("clock enable failed (%d)\n", ret);
goto err_clk_enable;
}
base = of_iomap(np, 0);
if (!base) {
pr_err("unable to map registers\n");
ret = -EADDRNOTAVAIL;
goto err_iomap;
}
/*
* Disable and reset timer then set it to free running timer
* mode (CTCR) with no prescaler (PR) or match operations (MCR).
* After setup the timer is released from reset and enabled.
*/
writel_relaxed(LPC32XX_TIMER_TCR_CRST, base + LPC32XX_TIMER_TCR);
writel_relaxed(0, base + LPC32XX_TIMER_PR);
writel_relaxed(0, base + LPC32XX_TIMER_MCR);
writel_relaxed(0, base + LPC32XX_TIMER_CTCR);
writel_relaxed(LPC32XX_TIMER_TCR_CEN, base + LPC32XX_TIMER_TCR);
rate = clk_get_rate(clk);
ret = clocksource_mmio_init(base + LPC32XX_TIMER_TC, "lpc3220 timer",
rate, 300, 32, clocksource_mmio_readl_up);
if (ret) {
pr_err("failed to init clocksource (%d)\n", ret);
goto err_clocksource_init;
}
clocksource_timer_counter = base + LPC32XX_TIMER_TC;
lpc32xx_delay_timer.freq = rate;
register_current_timer_delay(&lpc32xx_delay_timer);
sched_clock_register(lpc32xx_read_sched_clock, 32, rate);
return 0;
err_clocksource_init:
iounmap(base);
err_iomap:
clk_disable_unprepare(clk);
err_clk_enable:
clk_put(clk);
return ret;
}
static int __init lpc32xx_clockevent_init(struct device_node *np)
{
void __iomem *base;
unsigned long rate;
struct clk *clk;
int ret, irq;
clk = of_clk_get_by_name(np, "timerclk");
if (IS_ERR(clk)) {
pr_err("clock get failed (%ld)\n", PTR_ERR(clk));
return PTR_ERR(clk);
}
ret = clk_prepare_enable(clk);
if (ret) {
pr_err("clock enable failed (%d)\n", ret);
goto err_clk_enable;
}
base = of_iomap(np, 0);
if (!base) {
pr_err("unable to map registers\n");
ret = -EADDRNOTAVAIL;
goto err_iomap;
}
irq = irq_of_parse_and_map(np, 0);
if (!irq) {
pr_err("get irq failed\n");
ret = -ENOENT;
goto err_irq;
}
/*
* Disable timer and clear any pending interrupt (IR) on match
* channel 0 (MR0). Clear the prescaler as it's not used.
*/
writel_relaxed(0, base + LPC32XX_TIMER_TCR);
writel_relaxed(0, base + LPC32XX_TIMER_PR);
writel_relaxed(0, base + LPC32XX_TIMER_CTCR);
writel_relaxed(LPC32XX_TIMER_IR_MR0INT, base + LPC32XX_TIMER_IR);
rate = clk_get_rate(clk);
lpc32xx_clk_event_ddata.base = base;
lpc32xx_clk_event_ddata.ticks_per_jiffy = DIV_ROUND_CLOSEST(rate, HZ);
clockevents_config_and_register(&lpc32xx_clk_event_ddata.evtdev,
rate, 1, -1);
ret = request_irq(irq, lpc32xx_clock_event_handler,
IRQF_TIMER | IRQF_IRQPOLL, "lpc3220 clockevent",
&lpc32xx_clk_event_ddata);
if (ret) {
pr_err("request irq failed\n");
goto err_irq;
}
return 0;
err_irq:
iounmap(base);
err_iomap:
clk_disable_unprepare(clk);
err_clk_enable:
clk_put(clk);
return ret;
}
/*
* This function asserts that we have exactly one clocksource and one
* clock_event_device in the end.
*/
static int __init lpc32xx_timer_init(struct device_node *np)
{
static int has_clocksource, has_clockevent;
int ret = 0;
if (!has_clocksource) {
ret = lpc32xx_clocksource_init(np);
if (!ret) {
has_clocksource = 1;
return 0;
}
}
if (!has_clockevent) {
ret = lpc32xx_clockevent_init(np);
if (!ret) {
has_clockevent = 1;
return 0;
}
}
return ret;
}
TIMER_OF_DECLARE(lpc32xx_timer, "nxp,lpc3220-timer", lpc32xx_timer_init);