mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-22 21:32:06 +07:00
2ace13e10d
Add PHY IDs for the DP83825CS, DP83825CM and the DP83825S devices to the DP83822 driver. Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
349 lines
9.1 KiB
C
349 lines
9.1 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/* Driver for the Texas Instruments DP83822, DP83825 and DP83826 PHYs.
|
|
*
|
|
* Copyright (C) 2017 Texas Instruments Inc.
|
|
*/
|
|
|
|
#include <linux/ethtool.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/netdevice.h>
|
|
|
|
#define DP83822_PHY_ID 0x2000a240
|
|
#define DP83825S_PHY_ID 0x2000a140
|
|
#define DP83825I_PHY_ID 0x2000a150
|
|
#define DP83825CM_PHY_ID 0x2000a160
|
|
#define DP83825CS_PHY_ID 0x2000a170
|
|
#define DP83826C_PHY_ID 0x2000a130
|
|
#define DP83826NC_PHY_ID 0x2000a110
|
|
|
|
#define DP83822_DEVADDR 0x1f
|
|
|
|
#define MII_DP83822_PHYSCR 0x11
|
|
#define MII_DP83822_MISR1 0x12
|
|
#define MII_DP83822_MISR2 0x13
|
|
#define MII_DP83822_RESET_CTRL 0x1f
|
|
|
|
#define DP83822_HW_RESET BIT(15)
|
|
#define DP83822_SW_RESET BIT(14)
|
|
|
|
/* PHYSCR Register Fields */
|
|
#define DP83822_PHYSCR_INT_OE BIT(0) /* Interrupt Output Enable */
|
|
#define DP83822_PHYSCR_INTEN BIT(1) /* Interrupt Enable */
|
|
|
|
/* MISR1 bits */
|
|
#define DP83822_RX_ERR_HF_INT_EN BIT(0)
|
|
#define DP83822_FALSE_CARRIER_HF_INT_EN BIT(1)
|
|
#define DP83822_ANEG_COMPLETE_INT_EN BIT(2)
|
|
#define DP83822_DUP_MODE_CHANGE_INT_EN BIT(3)
|
|
#define DP83822_SPEED_CHANGED_INT_EN BIT(4)
|
|
#define DP83822_LINK_STAT_INT_EN BIT(5)
|
|
#define DP83822_ENERGY_DET_INT_EN BIT(6)
|
|
#define DP83822_LINK_QUAL_INT_EN BIT(7)
|
|
|
|
/* MISR2 bits */
|
|
#define DP83822_JABBER_DET_INT_EN BIT(0)
|
|
#define DP83822_WOL_PKT_INT_EN BIT(1)
|
|
#define DP83822_SLEEP_MODE_INT_EN BIT(2)
|
|
#define DP83822_MDI_XOVER_INT_EN BIT(3)
|
|
#define DP83822_LB_FIFO_INT_EN BIT(4)
|
|
#define DP83822_PAGE_RX_INT_EN BIT(5)
|
|
#define DP83822_ANEG_ERR_INT_EN BIT(6)
|
|
#define DP83822_EEE_ERROR_CHANGE_INT_EN BIT(7)
|
|
|
|
/* INT_STAT1 bits */
|
|
#define DP83822_WOL_INT_EN BIT(4)
|
|
#define DP83822_WOL_INT_STAT BIT(12)
|
|
|
|
#define MII_DP83822_RXSOP1 0x04a5
|
|
#define MII_DP83822_RXSOP2 0x04a6
|
|
#define MII_DP83822_RXSOP3 0x04a7
|
|
|
|
/* WoL Registers */
|
|
#define MII_DP83822_WOL_CFG 0x04a0
|
|
#define MII_DP83822_WOL_STAT 0x04a1
|
|
#define MII_DP83822_WOL_DA1 0x04a2
|
|
#define MII_DP83822_WOL_DA2 0x04a3
|
|
#define MII_DP83822_WOL_DA3 0x04a4
|
|
|
|
/* WoL bits */
|
|
#define DP83822_WOL_MAGIC_EN BIT(0)
|
|
#define DP83822_WOL_SECURE_ON BIT(5)
|
|
#define DP83822_WOL_EN BIT(7)
|
|
#define DP83822_WOL_INDICATION_SEL BIT(8)
|
|
#define DP83822_WOL_CLR_INDICATION BIT(11)
|
|
|
|
static int dp83822_ack_interrupt(struct phy_device *phydev)
|
|
{
|
|
int err;
|
|
|
|
err = phy_read(phydev, MII_DP83822_MISR1);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
err = phy_read(phydev, MII_DP83822_MISR2);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dp83822_set_wol(struct phy_device *phydev,
|
|
struct ethtool_wolinfo *wol)
|
|
{
|
|
struct net_device *ndev = phydev->attached_dev;
|
|
u16 value;
|
|
const u8 *mac;
|
|
|
|
if (wol->wolopts & (WAKE_MAGIC | WAKE_MAGICSECURE)) {
|
|
mac = (const u8 *)ndev->dev_addr;
|
|
|
|
if (!is_valid_ether_addr(mac))
|
|
return -EINVAL;
|
|
|
|
/* MAC addresses start with byte 5, but stored in mac[0].
|
|
* 822 PHYs store bytes 4|5, 2|3, 0|1
|
|
*/
|
|
phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_DA1,
|
|
(mac[1] << 8) | mac[0]);
|
|
phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_DA2,
|
|
(mac[3] << 8) | mac[2]);
|
|
phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_DA3,
|
|
(mac[5] << 8) | mac[4]);
|
|
|
|
value = phy_read_mmd(phydev, DP83822_DEVADDR,
|
|
MII_DP83822_WOL_CFG);
|
|
if (wol->wolopts & WAKE_MAGIC)
|
|
value |= DP83822_WOL_MAGIC_EN;
|
|
else
|
|
value &= ~DP83822_WOL_MAGIC_EN;
|
|
|
|
if (wol->wolopts & WAKE_MAGICSECURE) {
|
|
phy_write_mmd(phydev, DP83822_DEVADDR,
|
|
MII_DP83822_RXSOP1,
|
|
(wol->sopass[1] << 8) | wol->sopass[0]);
|
|
phy_write_mmd(phydev, DP83822_DEVADDR,
|
|
MII_DP83822_RXSOP2,
|
|
(wol->sopass[3] << 8) | wol->sopass[2]);
|
|
phy_write_mmd(phydev, DP83822_DEVADDR,
|
|
MII_DP83822_RXSOP3,
|
|
(wol->sopass[5] << 8) | wol->sopass[4]);
|
|
value |= DP83822_WOL_SECURE_ON;
|
|
} else {
|
|
value &= ~DP83822_WOL_SECURE_ON;
|
|
}
|
|
|
|
value |= (DP83822_WOL_EN | DP83822_WOL_INDICATION_SEL |
|
|
DP83822_WOL_CLR_INDICATION);
|
|
phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG,
|
|
value);
|
|
} else {
|
|
value = phy_read_mmd(phydev, DP83822_DEVADDR,
|
|
MII_DP83822_WOL_CFG);
|
|
value &= ~DP83822_WOL_EN;
|
|
phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG,
|
|
value);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dp83822_get_wol(struct phy_device *phydev,
|
|
struct ethtool_wolinfo *wol)
|
|
{
|
|
int value;
|
|
u16 sopass_val;
|
|
|
|
wol->supported = (WAKE_MAGIC | WAKE_MAGICSECURE);
|
|
wol->wolopts = 0;
|
|
|
|
value = phy_read_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG);
|
|
|
|
if (value & DP83822_WOL_MAGIC_EN)
|
|
wol->wolopts |= WAKE_MAGIC;
|
|
|
|
if (value & DP83822_WOL_SECURE_ON) {
|
|
sopass_val = phy_read_mmd(phydev, DP83822_DEVADDR,
|
|
MII_DP83822_RXSOP1);
|
|
wol->sopass[0] = (sopass_val & 0xff);
|
|
wol->sopass[1] = (sopass_val >> 8);
|
|
|
|
sopass_val = phy_read_mmd(phydev, DP83822_DEVADDR,
|
|
MII_DP83822_RXSOP2);
|
|
wol->sopass[2] = (sopass_val & 0xff);
|
|
wol->sopass[3] = (sopass_val >> 8);
|
|
|
|
sopass_val = phy_read_mmd(phydev, DP83822_DEVADDR,
|
|
MII_DP83822_RXSOP3);
|
|
wol->sopass[4] = (sopass_val & 0xff);
|
|
wol->sopass[5] = (sopass_val >> 8);
|
|
|
|
wol->wolopts |= WAKE_MAGICSECURE;
|
|
}
|
|
|
|
/* WoL is not enabled so set wolopts to 0 */
|
|
if (!(value & DP83822_WOL_EN))
|
|
wol->wolopts = 0;
|
|
}
|
|
|
|
static int dp83822_config_intr(struct phy_device *phydev)
|
|
{
|
|
int misr_status;
|
|
int physcr_status;
|
|
int err;
|
|
|
|
if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
|
|
misr_status = phy_read(phydev, MII_DP83822_MISR1);
|
|
if (misr_status < 0)
|
|
return misr_status;
|
|
|
|
misr_status |= (DP83822_RX_ERR_HF_INT_EN |
|
|
DP83822_FALSE_CARRIER_HF_INT_EN |
|
|
DP83822_ANEG_COMPLETE_INT_EN |
|
|
DP83822_DUP_MODE_CHANGE_INT_EN |
|
|
DP83822_SPEED_CHANGED_INT_EN |
|
|
DP83822_LINK_STAT_INT_EN |
|
|
DP83822_ENERGY_DET_INT_EN |
|
|
DP83822_LINK_QUAL_INT_EN);
|
|
|
|
err = phy_write(phydev, MII_DP83822_MISR1, misr_status);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
misr_status = phy_read(phydev, MII_DP83822_MISR2);
|
|
if (misr_status < 0)
|
|
return misr_status;
|
|
|
|
misr_status |= (DP83822_JABBER_DET_INT_EN |
|
|
DP83822_WOL_PKT_INT_EN |
|
|
DP83822_SLEEP_MODE_INT_EN |
|
|
DP83822_MDI_XOVER_INT_EN |
|
|
DP83822_LB_FIFO_INT_EN |
|
|
DP83822_PAGE_RX_INT_EN |
|
|
DP83822_ANEG_ERR_INT_EN |
|
|
DP83822_EEE_ERROR_CHANGE_INT_EN);
|
|
|
|
err = phy_write(phydev, MII_DP83822_MISR2, misr_status);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
physcr_status = phy_read(phydev, MII_DP83822_PHYSCR);
|
|
if (physcr_status < 0)
|
|
return physcr_status;
|
|
|
|
physcr_status |= DP83822_PHYSCR_INT_OE | DP83822_PHYSCR_INTEN;
|
|
|
|
} else {
|
|
err = phy_write(phydev, MII_DP83822_MISR1, 0);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
err = phy_write(phydev, MII_DP83822_MISR1, 0);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
physcr_status = phy_read(phydev, MII_DP83822_PHYSCR);
|
|
if (physcr_status < 0)
|
|
return physcr_status;
|
|
|
|
physcr_status &= ~DP83822_PHYSCR_INTEN;
|
|
}
|
|
|
|
return phy_write(phydev, MII_DP83822_PHYSCR, physcr_status);
|
|
}
|
|
|
|
static int dp83822_config_init(struct phy_device *phydev)
|
|
{
|
|
int value;
|
|
|
|
value = DP83822_WOL_MAGIC_EN | DP83822_WOL_SECURE_ON | DP83822_WOL_EN;
|
|
|
|
return phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG,
|
|
value);
|
|
}
|
|
|
|
static int dp83822_phy_reset(struct phy_device *phydev)
|
|
{
|
|
int err;
|
|
|
|
err = phy_write(phydev, MII_DP83822_RESET_CTRL, DP83822_HW_RESET);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
dp83822_config_init(phydev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dp83822_suspend(struct phy_device *phydev)
|
|
{
|
|
int value;
|
|
|
|
value = phy_read_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG);
|
|
|
|
if (!(value & DP83822_WOL_EN))
|
|
genphy_suspend(phydev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dp83822_resume(struct phy_device *phydev)
|
|
{
|
|
int value;
|
|
|
|
genphy_resume(phydev);
|
|
|
|
value = phy_read_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG);
|
|
|
|
phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG, value |
|
|
DP83822_WOL_CLR_INDICATION);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define DP83822_PHY_DRIVER(_id, _name) \
|
|
{ \
|
|
PHY_ID_MATCH_MODEL(_id), \
|
|
.name = (_name), \
|
|
/* PHY_BASIC_FEATURES */ \
|
|
.soft_reset = dp83822_phy_reset, \
|
|
.config_init = dp83822_config_init, \
|
|
.get_wol = dp83822_get_wol, \
|
|
.set_wol = dp83822_set_wol, \
|
|
.ack_interrupt = dp83822_ack_interrupt, \
|
|
.config_intr = dp83822_config_intr, \
|
|
.suspend = dp83822_suspend, \
|
|
.resume = dp83822_resume, \
|
|
}
|
|
|
|
static struct phy_driver dp83822_driver[] = {
|
|
DP83822_PHY_DRIVER(DP83822_PHY_ID, "TI DP83822"),
|
|
DP83822_PHY_DRIVER(DP83825I_PHY_ID, "TI DP83825I"),
|
|
DP83822_PHY_DRIVER(DP83826C_PHY_ID, "TI DP83826C"),
|
|
DP83822_PHY_DRIVER(DP83826NC_PHY_ID, "TI DP83826NC"),
|
|
DP83822_PHY_DRIVER(DP83825S_PHY_ID, "TI DP83825S"),
|
|
DP83822_PHY_DRIVER(DP83825CM_PHY_ID, "TI DP83825M"),
|
|
DP83822_PHY_DRIVER(DP83825CS_PHY_ID, "TI DP83825CS"),
|
|
};
|
|
module_phy_driver(dp83822_driver);
|
|
|
|
static struct mdio_device_id __maybe_unused dp83822_tbl[] = {
|
|
{ DP83822_PHY_ID, 0xfffffff0 },
|
|
{ DP83825I_PHY_ID, 0xfffffff0 },
|
|
{ DP83826C_PHY_ID, 0xfffffff0 },
|
|
{ DP83826NC_PHY_ID, 0xfffffff0 },
|
|
{ DP83825S_PHY_ID, 0xfffffff0 },
|
|
{ DP83825CM_PHY_ID, 0xfffffff0 },
|
|
{ DP83825CS_PHY_ID, 0xfffffff0 },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(mdio, dp83822_tbl);
|
|
|
|
MODULE_DESCRIPTION("Texas Instruments DP83822 PHY driver");
|
|
MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com");
|
|
MODULE_LICENSE("GPL v2");
|