AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-01 19:26:45 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
d951c1ddeb
linux_dsm_epyc7002/net/wireless/reg.c
Luis R. Rodriguez d951c1ddeb cfg80211: do not kzalloc() again for a new request on __regulatory_hint 
Since we already have a regulatory request from the workqueue use that
and avoid a new kzalloc()

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:53:00 -05:00

2190 lines
57 KiB
C
Raw Blame History

/*
* Copyright 2002-2005, Instant802 Networks, Inc.
* Copyright 2005-2006, Devicescape Software, Inc.
* Copyright 2007 Johannes Berg <johannes@sipsolutions.net>
* Copyright 2008 Luis R. Rodriguez <lrodriguz@atheros.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/**
* DOC: Wireless regulatory infrastructure
*
* The usual implementation is for a driver to read a device EEPROM to
* determine which regulatory domain it should be operating under, then
* looking up the allowable channels in a driver-local table and finally
* registering those channels in the wiphy structure.
*
* Another set of compliance enforcement is for drivers to use their
* own compliance limits which can be stored on the EEPROM. The host
* driver or firmware may ensure these are used.
*
* In addition to all this we provide an extra layer of regulatory
* conformance. For drivers which do not have any regulatory
* information CRDA provides the complete regulatory solution.
* For others it provides a community effort on further restrictions
* to enhance compliance.
*
* Note: When number of rules --> infinity we will not be able to
* index on alpha2 any more, instead we'll probably have to
* rely on some SHA1 checksum of the regdomain for example.
*
*/
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/random.h>
#include <linux/nl80211.h>
#include <linux/platform_device.h>
#include <net/wireless.h>
#include <net/cfg80211.h>
#include "core.h"
#include "reg.h"
/* Receipt of information from last regulatory request */
static struct regulatory_request *last_request;
/* To trigger userspace events */
static struct platform_device *reg_pdev;
/* Keep the ordering from large to small */
static u32 supported_bandwidths[] = {
MHZ_TO_KHZ(40),
MHZ_TO_KHZ(20),
};
/*
* Central wireless core regulatory domains, we only need two,
* the current one and a world regulatory domain in case we have no
* information to give us an alpha2
*/
const struct ieee80211_regdomain *cfg80211_regdomain;
/*
* We use this as a place for the rd structure built from the
* last parsed country IE to rest until CRDA gets back to us with
* what it thinks should apply for the same country
*/
static const struct ieee80211_regdomain *country_ie_regdomain;
/* Used to queue up regulatory hints */
static LIST_HEAD(reg_requests_list);
static spinlock_t reg_requests_lock;
/* Used to queue up beacon hints for review */
static LIST_HEAD(reg_pending_beacons);
static spinlock_t reg_pending_beacons_lock;
/* Used to keep track of processed beacon hints */
static LIST_HEAD(reg_beacon_list);
struct reg_beacon {
struct list_head list;
struct ieee80211_channel chan;
};
/* We keep a static world regulatory domain in case of the absence of CRDA */
static const struct ieee80211_regdomain world_regdom = {
.n_reg_rules = 3,
.alpha2 = "00",
.reg_rules = {
/* IEEE 802.11b/g, channels 1..11 */
REG_RULE(2412-10, 2462+10, 40, 6, 20, 0),
/* IEEE 802.11a, channel 36..48 */
REG_RULE(5180-10, 5240+10, 40, 6, 23,
NL80211_RRF_PASSIVE_SCAN |
NL80211_RRF_NO_IBSS),
/* NB: 5260 MHz - 5700 MHz requies DFS */
/* IEEE 802.11a, channel 149..165 */
REG_RULE(5745-10, 5825+10, 40, 6, 23,
NL80211_RRF_PASSIVE_SCAN |
NL80211_RRF_NO_IBSS),
}
};
static const struct ieee80211_regdomain *cfg80211_world_regdom =
&world_regdom;
#ifdef CONFIG_WIRELESS_OLD_REGULATORY
static char *ieee80211_regdom = "US";
module_param(ieee80211_regdom, charp, 0444);
MODULE_PARM_DESC(ieee80211_regdom, "IEEE 802.11 regulatory domain code");
/*
* We assume 40 MHz bandwidth for the old regulatory work.
* We make emphasis we are using the exact same frequencies
* as before
*/
static const struct ieee80211_regdomain us_regdom = {
.n_reg_rules = 6,
.alpha2 = "US",
.reg_rules = {
/* IEEE 802.11b/g, channels 1..11 */
REG_RULE(2412-10, 2462+10, 40, 6, 27, 0),
/* IEEE 802.11a, channel 36 */
REG_RULE(5180-10, 5180+10, 40, 6, 23, 0),
/* IEEE 802.11a, channel 40 */
REG_RULE(5200-10, 5200+10, 40, 6, 23, 0),
/* IEEE 802.11a, channel 44 */
REG_RULE(5220-10, 5220+10, 40, 6, 23, 0),
/* IEEE 802.11a, channels 48..64 */
REG_RULE(5240-10, 5320+10, 40, 6, 23, 0),
/* IEEE 802.11a, channels 149..165, outdoor */
REG_RULE(5745-10, 5825+10, 40, 6, 30, 0),
}
};
static const struct ieee80211_regdomain jp_regdom = {
.n_reg_rules = 3,
.alpha2 = "JP",
.reg_rules = {
/* IEEE 802.11b/g, channels 1..14 */
REG_RULE(2412-10, 2484+10, 40, 6, 20, 0),
/* IEEE 802.11a, channels 34..48 */
REG_RULE(5170-10, 5240+10, 40, 6, 20,
NL80211_RRF_PASSIVE_SCAN),
/* IEEE 802.11a, channels 52..64 */
REG_RULE(5260-10, 5320+10, 40, 6, 20,
NL80211_RRF_NO_IBSS |
NL80211_RRF_DFS),
}
};
static const struct ieee80211_regdomain eu_regdom = {
.n_reg_rules = 6,
/*
* This alpha2 is bogus, we leave it here just for stupid
* backward compatibility
*/
.alpha2 = "EU",
.reg_rules = {
/* IEEE 802.11b/g, channels 1..13 */
REG_RULE(2412-10, 2472+10, 40, 6, 20, 0),
/* IEEE 802.11a, channel 36 */
REG_RULE(5180-10, 5180+10, 40, 6, 23,
NL80211_RRF_PASSIVE_SCAN),
/* IEEE 802.11a, channel 40 */
REG_RULE(5200-10, 5200+10, 40, 6, 23,
NL80211_RRF_PASSIVE_SCAN),
/* IEEE 802.11a, channel 44 */
REG_RULE(5220-10, 5220+10, 40, 6, 23,
NL80211_RRF_PASSIVE_SCAN),
/* IEEE 802.11a, channels 48..64 */
REG_RULE(5240-10, 5320+10, 40, 6, 20,
NL80211_RRF_NO_IBSS |
NL80211_RRF_DFS),
/* IEEE 802.11a, channels 100..140 */
REG_RULE(5500-10, 5700+10, 40, 6, 30,
NL80211_RRF_NO_IBSS |
NL80211_RRF_DFS),
}
};
static const struct ieee80211_regdomain *static_regdom(char *alpha2)
{
if (alpha2[0] == 'U' && alpha2[1] == 'S')
return &us_regdom;
if (alpha2[0] == 'J' && alpha2[1] == 'P')
return &jp_regdom;
if (alpha2[0] == 'E' && alpha2[1] == 'U')
return &eu_regdom;
/* Default, as per the old rules */
return &us_regdom;
}
static bool is_old_static_regdom(const struct ieee80211_regdomain *rd)
{
if (rd == &us_regdom || rd == &jp_regdom || rd == &eu_regdom)
return true;
return false;
}
#else
static inline bool is_old_static_regdom(const struct ieee80211_regdomain *rd)
{
return false;
}
#endif
static void reset_regdomains(void)
{
/* avoid freeing static information or freeing something twice */
if (cfg80211_regdomain == cfg80211_world_regdom)
cfg80211_regdomain = NULL;
if (cfg80211_world_regdom == &world_regdom)
cfg80211_world_regdom = NULL;
if (cfg80211_regdomain == &world_regdom)
cfg80211_regdomain = NULL;
if (is_old_static_regdom(cfg80211_regdomain))
cfg80211_regdomain = NULL;
kfree(cfg80211_regdomain);
kfree(cfg80211_world_regdom);
cfg80211_world_regdom = &world_regdom;
cfg80211_regdomain = NULL;
}
/*
* Dynamic world regulatory domain requested by the wireless
* core upon initialization
*/
static void update_world_regdomain(const struct ieee80211_regdomain *rd)
{
BUG_ON(!last_request);
reset_regdomains();
cfg80211_world_regdom = rd;
cfg80211_regdomain = rd;
}
bool is_world_regdom(const char *alpha2)
{
if (!alpha2)
return false;
if (alpha2[0] == '0' && alpha2[1] == '0')
return true;
return false;
}
static bool is_alpha2_set(const char *alpha2)
{
if (!alpha2)
return false;
if (alpha2[0] != 0 && alpha2[1] != 0)
return true;
return false;
}
static bool is_alpha_upper(char letter)
{
/* ASCII A - Z */
if (letter >= 65 && letter <= 90)
return true;
return false;
}
static bool is_unknown_alpha2(const char *alpha2)
{
if (!alpha2)
return false;
/*
* Special case where regulatory domain was built by driver
* but a specific alpha2 cannot be determined
*/
if (alpha2[0] == '9' && alpha2[1] == '9')
return true;
return false;
}
static bool is_intersected_alpha2(const char *alpha2)
{
if (!alpha2)
return false;
/*
* Special case where regulatory domain is the
* result of an intersection between two regulatory domain
* structures
*/
if (alpha2[0] == '9' && alpha2[1] == '8')
return true;
return false;
}
static bool is_an_alpha2(const char *alpha2)
{
if (!alpha2)
return false;
if (is_alpha_upper(alpha2[0]) && is_alpha_upper(alpha2[1]))
return true;
return false;
}
static bool alpha2_equal(const char *alpha2_x, const char *alpha2_y)
{
if (!alpha2_x || !alpha2_y)
return false;
if (alpha2_x[0] == alpha2_y[0] &&
alpha2_x[1] == alpha2_y[1])
return true;
return false;
}
static bool regdom_changes(const char *alpha2)
{
assert_cfg80211_lock();
if (!cfg80211_regdomain)
return true;
if (alpha2_equal(cfg80211_regdomain->alpha2, alpha2))
return false;
return true;
}
/**
* country_ie_integrity_changes - tells us if the country IE has changed
* @checksum: checksum of country IE of fields we are interested in
*
* If the country IE has not changed you can ignore it safely. This is
* useful to determine if two devices are seeing two different country IEs
* even on the same alpha2. Note that this will return false if no IE has
* been set on the wireless core yet.
*/
static bool country_ie_integrity_changes(u32 checksum)
{
/* If no IE has been set then the checksum doesn't change */
if (unlikely(!last_request->country_ie_checksum))
return false;
if (unlikely(last_request->country_ie_checksum != checksum))
return true;
return false;
}
/*
* This lets us keep regulatory code which is updated on a regulatory
* basis in userspace.
*/
static int call_crda(const char *alpha2)
{
char country_env[9 + 2] = "COUNTRY=";
char *envp[] = {
country_env,
NULL
};
if (!is_world_regdom((char *) alpha2))
printk(KERN_INFO "cfg80211: Calling CRDA for country: %c%c\n",
alpha2[0], alpha2[1]);
else
printk(KERN_INFO "cfg80211: Calling CRDA to update world "
"regulatory domain\n");
country_env[8] = alpha2[0];
country_env[9] = alpha2[1];
return kobject_uevent_env(&reg_pdev->dev.kobj, KOBJ_CHANGE, envp);
}
/* Used by nl80211 before kmalloc'ing our regulatory domain */
bool reg_is_valid_request(const char *alpha2)
{
if (!last_request)
return false;
return alpha2_equal(last_request->alpha2, alpha2);
}
/* Sanity check on a regulatory rule */
static bool is_valid_reg_rule(const struct ieee80211_reg_rule *rule)
{
const struct ieee80211_freq_range *freq_range = &rule->freq_range;
u32 freq_diff;
if (freq_range->start_freq_khz <= 0 || freq_range->end_freq_khz <= 0)
return false;
if (freq_range->start_freq_khz > freq_range->end_freq_khz)
return false;
freq_diff = freq_range->end_freq_khz - freq_range->start_freq_khz;
if (freq_diff <= 0 || freq_range->max_bandwidth_khz > freq_diff)
return false;
return true;
}
static bool is_valid_rd(const struct ieee80211_regdomain *rd)
{
const struct ieee80211_reg_rule *reg_rule = NULL;
unsigned int i;
if (!rd->n_reg_rules)
return false;
if (WARN_ON(rd->n_reg_rules > NL80211_MAX_SUPP_REG_RULES))
return false;
for (i = 0; i < rd->n_reg_rules; i++) {
reg_rule = &rd->reg_rules[i];
if (!is_valid_reg_rule(reg_rule))
return false;
}
return true;
}
/* Returns value in KHz */
static u32 freq_max_bandwidth(const struct ieee80211_freq_range *freq_range,
u32 freq)
{
unsigned int i;
for (i = 0; i < ARRAY_SIZE(supported_bandwidths); i++) {
u32 start_freq_khz = freq - supported_bandwidths[i]/2;
u32 end_freq_khz = freq + supported_bandwidths[i]/2;
if (start_freq_khz >= freq_range->start_freq_khz &&
end_freq_khz <= freq_range->end_freq_khz)
return supported_bandwidths[i];
}
return 0;
}
/**
* freq_in_rule_band - tells us if a frequency is in a frequency band
* @freq_range: frequency rule we want to query
* @freq_khz: frequency we are inquiring about
*
* This lets us know if a specific frequency rule is or is not relevant to
* a specific frequency's band. Bands are device specific and artificial
* definitions (the "2.4 GHz band" and the "5 GHz band"), however it is
* safe for now to assume that a frequency rule should not be part of a
* frequency's band if the start freq or end freq are off by more than 2 GHz.
* This resolution can be lowered and should be considered as we add
* regulatory rule support for other "bands".
**/
static bool freq_in_rule_band(const struct ieee80211_freq_range *freq_range,
u32 freq_khz)
{
#define ONE_GHZ_IN_KHZ 1000000
if (abs(freq_khz - freq_range->start_freq_khz) <= (2 * ONE_GHZ_IN_KHZ))
return true;
if (abs(freq_khz - freq_range->end_freq_khz) <= (2 * ONE_GHZ_IN_KHZ))
return true;
return false;
#undef ONE_GHZ_IN_KHZ
}
/*
* Converts a country IE to a regulatory domain. A regulatory domain
* structure has a lot of information which the IE doesn't yet have,
* so for the other values we use upper max values as we will intersect
* with our userspace regulatory agent to get lower bounds.
*/
static struct ieee80211_regdomain *country_ie_2_rd(
u8 *country_ie,
u8 country_ie_len,
u32 *checksum)
{
struct ieee80211_regdomain *rd = NULL;
unsigned int i = 0;
char alpha2[2];
u32 flags = 0;
u32 num_rules = 0, size_of_regd = 0;
u8 *triplets_start = NULL;
u8 len_at_triplet = 0;
/* the last channel we have registered in a subband (triplet) */
int last_sub_max_channel = 0;
*checksum = 0xDEADBEEF;
/* Country IE requirements */
BUG_ON(country_ie_len < IEEE80211_COUNTRY_IE_MIN_LEN ||
country_ie_len & 0x01);
alpha2[0] = country_ie[0];
alpha2[1] = country_ie[1];
/*
* Third octet can be:
* 'I' - Indoor
* 'O' - Outdoor
*
* anything else we assume is no restrictions
*/
if (country_ie[2] == 'I')
flags = NL80211_RRF_NO_OUTDOOR;
else if (country_ie[2] == 'O')
flags = NL80211_RRF_NO_INDOOR;
country_ie += 3;
country_ie_len -= 3;
triplets_start = country_ie;
len_at_triplet = country_ie_len;
*checksum ^= ((flags ^ alpha2[0] ^ alpha2[1]) << 8);
/*
* We need to build a reg rule for each triplet, but first we must
* calculate the number of reg rules we will need. We will need one
* for each channel subband
*/
while (country_ie_len >= 3) {
int end_channel = 0;
struct ieee80211_country_ie_triplet *triplet =
(struct ieee80211_country_ie_triplet *) country_ie;
int cur_sub_max_channel = 0, cur_channel = 0;
if (triplet->ext.reg_extension_id >=
IEEE80211_COUNTRY_EXTENSION_ID) {
country_ie += 3;
country_ie_len -= 3;
continue;
}
/* 2 GHz */
if (triplet->chans.first_channel <= 14)
end_channel = triplet->chans.first_channel +
triplet->chans.num_channels;
else
/*
* 5 GHz -- For example in country IEs if the first
* channel given is 36 and the number of channels is 4
* then the individual channel numbers defined for the
* 5 GHz PHY by these parameters are: 36, 40, 44, and 48
* and not 36, 37, 38, 39.
*
* See: http://tinyurl.com/11d-clarification
*/
end_channel = triplet->chans.first_channel +
(4 * (triplet->chans.num_channels - 1));
cur_channel = triplet->chans.first_channel;
cur_sub_max_channel = end_channel;
/* Basic sanity check */
if (cur_sub_max_channel < cur_channel)
return NULL;
/*
* Do not allow overlapping channels. Also channels
* passed in each subband must be monotonically
* increasing
*/
if (last_sub_max_channel) {
if (cur_channel <= last_sub_max_channel)
return NULL;
if (cur_sub_max_channel <= last_sub_max_channel)
return NULL;
}
/*
* When dot11RegulatoryClassesRequired is supported
* we can throw ext triplets as part of this soup,
* for now we don't care when those change as we
* don't support them
*/
*checksum ^= ((cur_channel ^ cur_sub_max_channel) << 8) |
((cur_sub_max_channel ^ cur_sub_max_channel) << 16) |
((triplet->chans.max_power ^ cur_sub_max_channel) << 24);
last_sub_max_channel = cur_sub_max_channel;
country_ie += 3;
country_ie_len -= 3;
num_rules++;
/*
* Note: this is not a IEEE requirement but
* simply a memory requirement
*/
if (num_rules > NL80211_MAX_SUPP_REG_RULES)
return NULL;
}
country_ie = triplets_start;
country_ie_len = len_at_triplet;
size_of_regd = sizeof(struct ieee80211_regdomain) +
(num_rules * sizeof(struct ieee80211_reg_rule));
rd = kzalloc(size_of_regd, GFP_KERNEL);
if (!rd)
return NULL;
rd->n_reg_rules = num_rules;
rd->alpha2[0] = alpha2[0];
rd->alpha2[1] = alpha2[1];
/* This time around we fill in the rd */
while (country_ie_len >= 3) {
int end_channel = 0;
struct ieee80211_country_ie_triplet *triplet =
(struct ieee80211_country_ie_triplet *) country_ie;
struct ieee80211_reg_rule *reg_rule = NULL;
struct ieee80211_freq_range *freq_range = NULL;
struct ieee80211_power_rule *power_rule = NULL;
/*
* Must parse if dot11RegulatoryClassesRequired is true,
* we don't support this yet
*/
if (triplet->ext.reg_extension_id >=
IEEE80211_COUNTRY_EXTENSION_ID) {
country_ie += 3;
country_ie_len -= 3;
continue;
}
reg_rule = &rd->reg_rules[i];
freq_range = &reg_rule->freq_range;
power_rule = &reg_rule->power_rule;
reg_rule->flags = flags;
/* 2 GHz */
if (triplet->chans.first_channel <= 14)
end_channel = triplet->chans.first_channel +
triplet->chans.num_channels;
else
end_channel = triplet->chans.first_channel +
(4 * (triplet->chans.num_channels - 1));
/*
* The +10 is since the regulatory domain expects
* the actual band edge, not the center of freq for
* its start and end freqs, assuming 20 MHz bandwidth on
* the channels passed
*/
freq_range->start_freq_khz =
MHZ_TO_KHZ(ieee80211_channel_to_frequency(
triplet->chans.first_channel) - 10);
freq_range->end_freq_khz =
MHZ_TO_KHZ(ieee80211_channel_to_frequency(
end_channel) + 10);
/*
* These are large arbitrary values we use to intersect later.
* Increment this if we ever support >= 40 MHz channels
* in IEEE 802.11
*/
freq_range->max_bandwidth_khz = MHZ_TO_KHZ(40);
power_rule->max_antenna_gain = DBI_TO_MBI(100);
power_rule->max_eirp = DBM_TO_MBM(100);
country_ie += 3;
country_ie_len -= 3;
i++;
BUG_ON(i > NL80211_MAX_SUPP_REG_RULES);
}
return rd;
}
/*
* Helper for regdom_intersect(), this does the real
* mathematical intersection fun
*/
static int reg_rules_intersect(
const struct ieee80211_reg_rule *rule1,
const struct ieee80211_reg_rule *rule2,
struct ieee80211_reg_rule *intersected_rule)
{
const struct ieee80211_freq_range *freq_range1, *freq_range2;
struct ieee80211_freq_range *freq_range;
const struct ieee80211_power_rule *power_rule1, *power_rule2;
struct ieee80211_power_rule *power_rule;
u32 freq_diff;
freq_range1 = &rule1->freq_range;
freq_range2 = &rule2->freq_range;
freq_range = &intersected_rule->freq_range;
power_rule1 = &rule1->power_rule;
power_rule2 = &rule2->power_rule;
power_rule = &intersected_rule->power_rule;
freq_range->start_freq_khz = max(freq_range1->start_freq_khz,
freq_range2->start_freq_khz);
freq_range->end_freq_khz = min(freq_range1->end_freq_khz,
freq_range2->end_freq_khz);
freq_range->max_bandwidth_khz = min(freq_range1->max_bandwidth_khz,
freq_range2->max_bandwidth_khz);
freq_diff = freq_range->end_freq_khz - freq_range->start_freq_khz;
if (freq_range->max_bandwidth_khz > freq_diff)
freq_range->max_bandwidth_khz = freq_diff;
power_rule->max_eirp = min(power_rule1->max_eirp,
power_rule2->max_eirp);
power_rule->max_antenna_gain = min(power_rule1->max_antenna_gain,
power_rule2->max_antenna_gain);
intersected_rule->flags = (rule1->flags | rule2->flags);
if (!is_valid_reg_rule(intersected_rule))
return -EINVAL;
return 0;
}
/**
* regdom_intersect - do the intersection between two regulatory domains
* @rd1: first regulatory domain
* @rd2: second regulatory domain
*
* Use this function to get the intersection between two regulatory domains.
* Once completed we will mark the alpha2 for the rd as intersected, "98",
* as no one single alpha2 can represent this regulatory domain.
*
* Returns a pointer to the regulatory domain structure which will hold the
* resulting intersection of rules between rd1 and rd2. We will
* kzalloc() this structure for you.
*/
static struct ieee80211_regdomain *regdom_intersect(
const struct ieee80211_regdomain *rd1,
const struct ieee80211_regdomain *rd2)
{
int r, size_of_regd;
unsigned int x, y;
unsigned int num_rules = 0, rule_idx = 0;
const struct ieee80211_reg_rule *rule1, *rule2;
struct ieee80211_reg_rule *intersected_rule;
struct ieee80211_regdomain *rd;
/* This is just a dummy holder to help us count */
struct ieee80211_reg_rule irule;
/* Uses the stack temporarily for counter arithmetic */
intersected_rule = &irule;
memset(intersected_rule, 0, sizeof(struct ieee80211_reg_rule));
if (!rd1 || !rd2)
return NULL;
/*
* First we get a count of the rules we'll need, then we actually
* build them. This is to so we can malloc() and free() a
* regdomain once. The reason we use reg_rules_intersect() here
* is it will return -EINVAL if the rule computed makes no sense.
* All rules that do check out OK are valid.
*/
for (x = 0; x < rd1->n_reg_rules; x++) {
rule1 = &rd1->reg_rules[x];
for (y = 0; y < rd2->n_reg_rules; y++) {
rule2 = &rd2->reg_rules[y];
if (!reg_rules_intersect(rule1, rule2,
intersected_rule))
num_rules++;
memset(intersected_rule, 0,
sizeof(struct ieee80211_reg_rule));
}
}
if (!num_rules)
return NULL;
size_of_regd = sizeof(struct ieee80211_regdomain) +
((num_rules + 1) * sizeof(struct ieee80211_reg_rule));
rd = kzalloc(size_of_regd, GFP_KERNEL);
if (!rd)
return NULL;
for (x = 0; x < rd1->n_reg_rules; x++) {
rule1 = &rd1->reg_rules[x];
for (y = 0; y < rd2->n_reg_rules; y++) {
rule2 = &rd2->reg_rules[y];
/*
* This time around instead of using the stack lets
* write to the target rule directly saving ourselves
* a memcpy()
*/
intersected_rule = &rd->reg_rules[rule_idx];
r = reg_rules_intersect(rule1, rule2,
intersected_rule);
/*
* No need to memset here the intersected rule here as
* we're not using the stack anymore
*/
if (r)
continue;
rule_idx++;
}
}
if (rule_idx != num_rules) {
kfree(rd);
return NULL;
}
rd->n_reg_rules = num_rules;
rd->alpha2[0] = '9';
rd->alpha2[1] = '8';
return rd;
}
/*
* XXX: add support for the rest of enum nl80211_reg_rule_flags, we may
* want to just have the channel structure use these
*/
static u32 map_regdom_flags(u32 rd_flags)
{
u32 channel_flags = 0;
if (rd_flags & NL80211_RRF_PASSIVE_SCAN)
channel_flags |= IEEE80211_CHAN_PASSIVE_SCAN;
if (rd_flags & NL80211_RRF_NO_IBSS)
channel_flags |= IEEE80211_CHAN_NO_IBSS;
if (rd_flags & NL80211_RRF_DFS)
channel_flags |= IEEE80211_CHAN_RADAR;
return channel_flags;
}
static int freq_reg_info_regd(struct wiphy *wiphy,
u32 center_freq,
u32 *bandwidth,
const struct ieee80211_reg_rule **reg_rule,
const struct ieee80211_regdomain *custom_regd)
{
int i;
bool band_rule_found = false;
const struct ieee80211_regdomain *regd;
u32 max_bandwidth = 0;
regd = custom_regd ? custom_regd : cfg80211_regdomain;
/*
* Follow the driver's regulatory domain, if present, unless a country
* IE has been processed or a user wants to help complaince further
*/
if (last_request->initiator != REGDOM_SET_BY_COUNTRY_IE &&
last_request->initiator != REGDOM_SET_BY_USER &&
wiphy->regd)
regd = wiphy->regd;
if (!regd)
return -EINVAL;
for (i = 0; i < regd->n_reg_rules; i++) {
const struct ieee80211_reg_rule *rr;
const struct ieee80211_freq_range *fr = NULL;
const struct ieee80211_power_rule *pr = NULL;
rr = &regd->reg_rules[i];
fr = &rr->freq_range;
pr = &rr->power_rule;
/*
* We only need to know if one frequency rule was
* was in center_freq's band, that's enough, so lets
* not overwrite it once found
*/
if (!band_rule_found)
band_rule_found = freq_in_rule_band(fr, center_freq);
max_bandwidth = freq_max_bandwidth(fr, center_freq);
if (max_bandwidth && *bandwidth <= max_bandwidth) {
*reg_rule = rr;
*bandwidth = max_bandwidth;
break;
}
}
if (!band_rule_found)
return -ERANGE;
return !max_bandwidth;
}
EXPORT_SYMBOL(freq_reg_info);
int freq_reg_info(struct wiphy *wiphy, u32 center_freq, u32 *bandwidth,
const struct ieee80211_reg_rule **reg_rule)
{
return freq_reg_info_regd(wiphy, center_freq,
bandwidth, reg_rule, NULL);
}
static void handle_channel(struct wiphy *wiphy, enum ieee80211_band band,
unsigned int chan_idx)
{
int r;
u32 flags;
u32 max_bandwidth = 0;
const struct ieee80211_reg_rule *reg_rule = NULL;
const struct ieee80211_power_rule *power_rule = NULL;
struct ieee80211_supported_band *sband;
struct ieee80211_channel *chan;
struct wiphy *request_wiphy = NULL;
assert_cfg80211_lock();
request_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx);
sband = wiphy->bands[band];
BUG_ON(chan_idx >= sband->n_channels);
chan = &sband->channels[chan_idx];
flags = chan->orig_flags;
r = freq_reg_info(wiphy, MHZ_TO_KHZ(chan->center_freq),
&max_bandwidth, &reg_rule);
if (r) {
/*
* This means no regulatory rule was found in the country IE
* with a frequency range on the center_freq's band, since
* IEEE-802.11 allows for a country IE to have a subset of the
* regulatory information provided in a country we ignore
* disabling the channel unless at least one reg rule was
* found on the center_freq's band. For details see this
* clarification:
*
* http://tinyurl.com/11d-clarification
*/
if (r == -ERANGE &&
last_request->initiator == REGDOM_SET_BY_COUNTRY_IE) {
#ifdef CONFIG_CFG80211_REG_DEBUG
printk(KERN_DEBUG "cfg80211: Leaving channel %d MHz "
"intact on %s - no rule found in band on "
"Country IE\n",
chan->center_freq, wiphy_name(wiphy));
#endif
} else {
/*
* In this case we know the country IE has at least one reg rule
* for the band so we respect its band definitions
*/
#ifdef CONFIG_CFG80211_REG_DEBUG
if (last_request->initiator == REGDOM_SET_BY_COUNTRY_IE)
printk(KERN_DEBUG "cfg80211: Disabling "
"channel %d MHz on %s due to "
"Country IE\n",
chan->center_freq, wiphy_name(wiphy));
#endif
flags |= IEEE80211_CHAN_DISABLED;
chan->flags = flags;
}
return;
}
power_rule = &reg_rule->power_rule;
if (last_request->initiator == REGDOM_SET_BY_DRIVER &&
request_wiphy && request_wiphy == wiphy &&
request_wiphy->strict_regulatory) {
/*
* This gaurantees the driver's requested regulatory domain
* will always be used as a base for further regulatory
* settings
*/
chan->flags = chan->orig_flags =
map_regdom_flags(reg_rule->flags);
chan->max_antenna_gain = chan->orig_mag =
(int) MBI_TO_DBI(power_rule->max_antenna_gain);
chan->max_bandwidth = KHZ_TO_MHZ(max_bandwidth);
chan->max_power = chan->orig_mpwr =
(int) MBM_TO_DBM(power_rule->max_eirp);
return;
}
chan->flags = flags | map_regdom_flags(reg_rule->flags);
chan->max_antenna_gain = min(chan->orig_mag,
(int) MBI_TO_DBI(power_rule->max_antenna_gain));
chan->max_bandwidth = KHZ_TO_MHZ(max_bandwidth);
if (chan->orig_mpwr)
chan->max_power = min(chan->orig_mpwr,
(int) MBM_TO_DBM(power_rule->max_eirp));
else
chan->max_power = (int) MBM_TO_DBM(power_rule->max_eirp);
}
static void handle_band(struct wiphy *wiphy, enum ieee80211_band band)
{
unsigned int i;
struct ieee80211_supported_band *sband;
BUG_ON(!wiphy->bands[band]);
sband = wiphy->bands[band];
for (i = 0; i < sband->n_channels; i++)
handle_channel(wiphy, band, i);
}
static bool ignore_reg_update(struct wiphy *wiphy, enum reg_set_by setby)
{
if (!last_request)
return true;
if (setby == REGDOM_SET_BY_CORE &&
wiphy->custom_regulatory)
return true;
/*
* wiphy->regd will be set once the device has its own
* desired regulatory domain set
*/
if (wiphy->strict_regulatory && !wiphy->regd &&
!is_world_regdom(last_request->alpha2))
return true;
return false;
}
static void update_all_wiphy_regulatory(enum reg_set_by setby)
{
struct cfg80211_registered_device *drv;
list_for_each_entry(drv, &cfg80211_drv_list, list)
wiphy_update_regulatory(&drv->wiphy, setby);
}
static void handle_reg_beacon(struct wiphy *wiphy,
unsigned int chan_idx,
struct reg_beacon *reg_beacon)
{
#ifdef CONFIG_CFG80211_REG_DEBUG
#define REG_DEBUG_BEACON_FLAG(desc) \
printk(KERN_DEBUG "cfg80211: Enabling " desc " on " \
"frequency: %d MHz (Ch %d) on %s\n", \
reg_beacon->chan.center_freq, \
ieee80211_frequency_to_channel(reg_beacon->chan.center_freq), \
wiphy_name(wiphy));
#else
#define REG_DEBUG_BEACON_FLAG(desc) do {} while (0)
#endif
struct ieee80211_supported_band *sband;
struct ieee80211_channel *chan;
assert_cfg80211_lock();
sband = wiphy->bands[reg_beacon->chan.band];
chan = &sband->channels[chan_idx];
if (likely(chan->center_freq != reg_beacon->chan.center_freq))
return;
if (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN) {
chan->flags &= ~IEEE80211_CHAN_PASSIVE_SCAN;
REG_DEBUG_BEACON_FLAG("active scanning");
}
if (chan->flags & IEEE80211_CHAN_NO_IBSS) {
chan->flags &= ~IEEE80211_CHAN_NO_IBSS;
REG_DEBUG_BEACON_FLAG("beaconing");
}
chan->beacon_found = true;
#undef REG_DEBUG_BEACON_FLAG
}
/*
* Called when a scan on a wiphy finds a beacon on
* new channel
*/
static void wiphy_update_new_beacon(struct wiphy *wiphy,
struct reg_beacon *reg_beacon)
{
unsigned int i;
struct ieee80211_supported_band *sband;
assert_cfg80211_lock();
if (!wiphy->bands[reg_beacon->chan.band])
return;
sband = wiphy->bands[reg_beacon->chan.band];
for (i = 0; i < sband->n_channels; i++)
handle_reg_beacon(wiphy, i, reg_beacon);
}
/*
* Called upon reg changes or a new wiphy is added
*/
static void wiphy_update_beacon_reg(struct wiphy *wiphy)
{
unsigned int i;
struct ieee80211_supported_band *sband;
struct reg_beacon *reg_beacon;
assert_cfg80211_lock();
if (list_empty(&reg_beacon_list))
return;
list_for_each_entry(reg_beacon, &reg_beacon_list, list) {
if (!wiphy->bands[reg_beacon->chan.band])
continue;
sband = wiphy->bands[reg_beacon->chan.band];
for (i = 0; i < sband->n_channels; i++)
handle_reg_beacon(wiphy, i, reg_beacon);
}
}
static bool reg_is_world_roaming(struct wiphy *wiphy)
{
if (is_world_regdom(cfg80211_regdomain->alpha2) ||
(wiphy->regd && is_world_regdom(wiphy->regd->alpha2)))
return true;
if (last_request->initiator != REGDOM_SET_BY_COUNTRY_IE &&
wiphy->custom_regulatory)
return true;
return false;
}
/* Reap the advantages of previously found beacons */
static void reg_process_beacons(struct wiphy *wiphy)
{
if (!reg_is_world_roaming(wiphy))
return;
wiphy_update_beacon_reg(wiphy);
}
void wiphy_update_regulatory(struct wiphy *wiphy, enum reg_set_by setby)
{
enum ieee80211_band band;
if (ignore_reg_update(wiphy, setby))
goto out;
for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
if (wiphy->bands[band])
handle_band(wiphy, band);
}
out:
reg_process_beacons(wiphy);
if (wiphy->reg_notifier)
wiphy->reg_notifier(wiphy, last_request);
}
static void handle_channel_custom(struct wiphy *wiphy,
enum ieee80211_band band,
unsigned int chan_idx,
const struct ieee80211_regdomain *regd)
{
int r;
u32 max_bandwidth = 0;
const struct ieee80211_reg_rule *reg_rule = NULL;
const struct ieee80211_power_rule *power_rule = NULL;
struct ieee80211_supported_band *sband;
struct ieee80211_channel *chan;
sband = wiphy->bands[band];
BUG_ON(chan_idx >= sband->n_channels);
chan = &sband->channels[chan_idx];
r = freq_reg_info_regd(wiphy, MHZ_TO_KHZ(chan->center_freq),
&max_bandwidth, &reg_rule, regd);
if (r) {
chan->flags = IEEE80211_CHAN_DISABLED;
return;
}
power_rule = &reg_rule->power_rule;
chan->flags |= map_regdom_flags(reg_rule->flags);
chan->max_antenna_gain = (int) MBI_TO_DBI(power_rule->max_antenna_gain);
chan->max_bandwidth = KHZ_TO_MHZ(max_bandwidth);
chan->max_power = (int) MBM_TO_DBM(power_rule->max_eirp);
}
static void handle_band_custom(struct wiphy *wiphy, enum ieee80211_band band,
const struct ieee80211_regdomain *regd)
{
unsigned int i;
struct ieee80211_supported_band *sband;
BUG_ON(!wiphy->bands[band]);
sband = wiphy->bands[band];
for (i = 0; i < sband->n_channels; i++)
handle_channel_custom(wiphy, band, i, regd);
}
/* Used by drivers prior to wiphy registration */
void wiphy_apply_custom_regulatory(struct wiphy *wiphy,
const struct ieee80211_regdomain *regd)
{
enum ieee80211_band band;
for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
if (wiphy->bands[band])
handle_band_custom(wiphy, band, regd);
}
}
EXPORT_SYMBOL(wiphy_apply_custom_regulatory);
static int reg_copy_regd(const struct ieee80211_regdomain **dst_regd,
const struct ieee80211_regdomain *src_regd)
{
struct ieee80211_regdomain *regd;
int size_of_regd = 0;
unsigned int i;
size_of_regd = sizeof(struct ieee80211_regdomain) +
((src_regd->n_reg_rules + 1) * sizeof(struct ieee80211_reg_rule));
regd = kzalloc(size_of_regd, GFP_KERNEL);
if (!regd)
return -ENOMEM;
memcpy(regd, src_regd, sizeof(struct ieee80211_regdomain));
for (i = 0; i < src_regd->n_reg_rules; i++)
memcpy(&regd->reg_rules[i], &src_regd->reg_rules[i],
sizeof(struct ieee80211_reg_rule));
*dst_regd = regd;
return 0;
}
/*
* Return value which can be used by ignore_request() to indicate
* it has been determined we should intersect two regulatory domains
*/
#define REG_INTERSECT 1
/* This has the logic which determines when a new request
* should be ignored. */
static int ignore_request(struct wiphy *wiphy, enum reg_set_by set_by,
const char *alpha2)
{
struct wiphy *last_wiphy = NULL;
assert_cfg80211_lock();
/* All initial requests are respected */
if (!last_request)
return 0;
switch (set_by) {
case REGDOM_SET_BY_INIT:
return -EINVAL;
case REGDOM_SET_BY_CORE:
return -EINVAL;
case REGDOM_SET_BY_COUNTRY_IE:
last_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx);
if (unlikely(!is_an_alpha2(alpha2)))
return -EINVAL;
if (last_request->initiator == REGDOM_SET_BY_COUNTRY_IE) {
if (last_wiphy != wiphy) {
/*
* Two cards with two APs claiming different
* different Country IE alpha2s. We could
* intersect them, but that seems unlikely
* to be correct. Reject second one for now.
*/
if (regdom_changes(alpha2))
return -EOPNOTSUPP;
return -EALREADY;
}
/*
* Two consecutive Country IE hints on the same wiphy.
* This should be picked up early by the driver/stack
*/
if (WARN_ON(regdom_changes(alpha2)))
return 0;
return -EALREADY;
}
return REG_INTERSECT;
case REGDOM_SET_BY_DRIVER:
if (last_request->initiator == REGDOM_SET_BY_CORE) {
if (is_old_static_regdom(cfg80211_regdomain))
return 0;
if (regdom_changes(alpha2))
return 0;
return -EALREADY;
}
/*
* This would happen if you unplug and plug your card
* back in or if you add a new device for which the previously
* loaded card also agrees on the regulatory domain.
*/
if (last_request->initiator == REGDOM_SET_BY_DRIVER &&
!regdom_changes(alpha2))
return -EALREADY;
return REG_INTERSECT;
case REGDOM_SET_BY_USER:
if (last_request->initiator == REGDOM_SET_BY_COUNTRY_IE)
return REG_INTERSECT;
/*
* If the user knows better the user should set the regdom
* to their country before the IE is picked up
*/
if (last_request->initiator == REGDOM_SET_BY_USER &&
last_request->intersect)
return -EOPNOTSUPP;
/*
* Process user requests only after previous user/driver/core
* requests have been processed
*/
if (last_request->initiator == REGDOM_SET_BY_CORE ||
last_request->initiator == REGDOM_SET_BY_DRIVER ||
last_request->initiator == REGDOM_SET_BY_USER) {
if (regdom_changes(last_request->alpha2))
return -EAGAIN;
}
if (!is_old_static_regdom(cfg80211_regdomain) &&
!regdom_changes(alpha2))
return -EALREADY;
return 0;
}
return -EINVAL;
}
/**
* __regulatory_hint - hint to the wireless core a regulatory domain
* @wiphy: if the hint comes from country information from an AP, this
* is required to be set to the wiphy that received the information
* @pending_request: the regulatory request currently being processed
*
* The Wireless subsystem can use this function to hint to the wireless core
* what it believes should be the current regulatory domain.
*
* Returns zero if all went fine, %-EALREADY if a regulatory domain had
* already been set or other standard error codes.
*
* Caller must hold &cfg80211_mutex
*/
static int __regulatory_hint(struct wiphy *wiphy,
struct regulatory_request *pending_request)
{
bool intersect = false;
int r = 0;
assert_cfg80211_lock();
r = ignore_request(wiphy,
pending_request->initiator,
pending_request->alpha2);
if (r == REG_INTERSECT) {
if (pending_request->initiator == REGDOM_SET_BY_DRIVER) {
r = reg_copy_regd(&wiphy->regd, cfg80211_regdomain);
if (r) {
kfree(pending_request);
return r;
}
}
intersect = true;
} else if (r) {
/*
* If the regulatory domain being requested by the
* driver has already been set just copy it to the
* wiphy
*/
if (r == -EALREADY &&
pending_request->initiator == REGDOM_SET_BY_DRIVER) {
r = reg_copy_regd(&wiphy->regd, cfg80211_regdomain);
if (r) {
kfree(pending_request);
return r;
}
r = -EALREADY;
goto new_request;
}
kfree(pending_request);
return r;
}
new_request:
kfree(last_request);
last_request = pending_request;
last_request->intersect = intersect;
pending_request = NULL;
/* When r == REG_INTERSECT we do need to call CRDA */
if (r < 0)
return r;
/*
* Note: When CONFIG_WIRELESS_OLD_REGULATORY is enabled
* AND if CRDA is NOT present nothing will happen, if someone
* wants to bother with 11d with OLD_REG you can add a timer.
* If after x amount of time nothing happens you can call:
*
* return set_regdom(country_ie_regdomain);
*
* to intersect with the static rd
*/
return call_crda(last_request->alpha2);
}
/* This currently only processes user and driver regulatory hints */
static void reg_process_hint(struct regulatory_request *reg_request)
{
int r = 0;
struct wiphy *wiphy = NULL;
BUG_ON(!reg_request->alpha2);
mutex_lock(&cfg80211_mutex);
if (wiphy_idx_valid(reg_request->wiphy_idx))
wiphy = wiphy_idx_to_wiphy(reg_request->wiphy_idx);
if (reg_request->initiator == REGDOM_SET_BY_DRIVER &&
!wiphy) {
kfree(reg_request);
goto out;
}
r = __regulatory_hint(wiphy, reg_request);
/* This is required so that the orig_* parameters are saved */
if (r == -EALREADY && wiphy && wiphy->strict_regulatory)
wiphy_update_regulatory(wiphy, reg_request->initiator);
out:
mutex_unlock(&cfg80211_mutex);
}
/* Processes regulatory hints, this is all the REGDOM_SET_BY_* */
static void reg_process_pending_hints(void)
{
struct regulatory_request *reg_request;
spin_lock(&reg_requests_lock);
while (!list_empty(&reg_requests_list)) {
reg_request = list_first_entry(&reg_requests_list,
struct regulatory_request,
list);
list_del_init(&reg_request->list);
spin_unlock(&reg_requests_lock);
reg_process_hint(reg_request);
spin_lock(&reg_requests_lock);
}
spin_unlock(&reg_requests_lock);
}
/* Processes beacon hints -- this has nothing to do with country IEs */
static void reg_process_pending_beacon_hints(void)
{
struct cfg80211_registered_device *drv;
struct reg_beacon *pending_beacon, *tmp;
mutex_lock(&cfg80211_mutex);
/* This goes through the _pending_ beacon list */
spin_lock_bh(&reg_pending_beacons_lock);
if (list_empty(&reg_pending_beacons)) {
spin_unlock_bh(&reg_pending_beacons_lock);
goto out;
}
list_for_each_entry_safe(pending_beacon, tmp,
&reg_pending_beacons, list) {
list_del_init(&pending_beacon->list);
/* Applies the beacon hint to current wiphys */
list_for_each_entry(drv, &cfg80211_drv_list, list)
wiphy_update_new_beacon(&drv->wiphy, pending_beacon);
/* Remembers the beacon hint for new wiphys or reg changes */
list_add_tail(&pending_beacon->list, &reg_beacon_list);
}
spin_unlock_bh(&reg_pending_beacons_lock);
out:
mutex_unlock(&cfg80211_mutex);
}
static void reg_todo(struct work_struct *work)
{
reg_process_pending_hints();
reg_process_pending_beacon_hints();
}
static DECLARE_WORK(reg_work, reg_todo);
static void queue_regulatory_request(struct regulatory_request *request)
{
spin_lock(&reg_requests_lock);
list_add_tail(&request->list, &reg_requests_list);
spin_unlock(&reg_requests_lock);
schedule_work(&reg_work);
}
/* Core regulatory hint -- happens once during cfg80211_init() */
static int regulatory_hint_core(const char *alpha2)
{
struct regulatory_request *request;
BUG_ON(last_request);
request = kzalloc(sizeof(struct regulatory_request),
GFP_KERNEL);
if (!request)
return -ENOMEM;
request->alpha2[0] = alpha2[0];
request->alpha2[1] = alpha2[1];
request->initiator = REGDOM_SET_BY_CORE;
queue_regulatory_request(request);
return 0;
}
/* User hints */
int regulatory_hint_user(const char *alpha2)
{
struct regulatory_request *request;
BUG_ON(!alpha2);
request = kzalloc(sizeof(struct regulatory_request), GFP_KERNEL);
if (!request)
return -ENOMEM;
request->wiphy_idx = WIPHY_IDX_STALE;
request->alpha2[0] = alpha2[0];
request->alpha2[1] = alpha2[1];
request->initiator = REGDOM_SET_BY_USER,
queue_regulatory_request(request);
return 0;
}
/* Driver hints */
int regulatory_hint(struct wiphy *wiphy, const char *alpha2)
{
struct regulatory_request *request;
BUG_ON(!alpha2);
BUG_ON(!wiphy);
request = kzalloc(sizeof(struct regulatory_request), GFP_KERNEL);
if (!request)
return -ENOMEM;
request->wiphy_idx = get_wiphy_idx(wiphy);
/* Must have registered wiphy first */
BUG_ON(!wiphy_idx_valid(request->wiphy_idx));
request->alpha2[0] = alpha2[0];
request->alpha2[1] = alpha2[1];
request->initiator = REGDOM_SET_BY_DRIVER;
queue_regulatory_request(request);
return 0;
}
EXPORT_SYMBOL(regulatory_hint);
static bool reg_same_country_ie_hint(struct wiphy *wiphy,
u32 country_ie_checksum)
{
struct wiphy *request_wiphy;
assert_cfg80211_lock();
request_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx);
if (!request_wiphy)
return false;
if (likely(request_wiphy != wiphy))
return !country_ie_integrity_changes(country_ie_checksum);
/*
* We should not have let these through at this point, they
* should have been picked up earlier by the first alpha2 check
* on the device
*/
if (WARN_ON(!country_ie_integrity_changes(country_ie_checksum)))
return true;
return false;
}
void regulatory_hint_11d(struct wiphy *wiphy,
u8 *country_ie,
u8 country_ie_len)
{
struct ieee80211_regdomain *rd = NULL;
char alpha2[2];
u32 checksum = 0;
enum environment_cap env = ENVIRON_ANY;
struct regulatory_request *request;
mutex_lock(&cfg80211_mutex);
if (unlikely(!last_request)) {
mutex_unlock(&cfg80211_mutex);
return;
}
/* IE len must be evenly divisible by 2 */
if (country_ie_len & 0x01)
goto out;
if (country_ie_len < IEEE80211_COUNTRY_IE_MIN_LEN)
goto out;
/*
* Pending country IE processing, this can happen after we
* call CRDA and wait for a response if a beacon was received before
* we were able to process the last regulatory_hint_11d() call
*/
if (country_ie_regdomain)
goto out;
alpha2[0] = country_ie[0];
alpha2[1] = country_ie[1];
if (country_ie[2] == 'I')
env = ENVIRON_INDOOR;
else if (country_ie[2] == 'O')
env = ENVIRON_OUTDOOR;
/*
* We will run this for *every* beacon processed for the BSSID, so
* we optimize an early check to exit out early if we don't have to
* do anything
*/
if (likely(wiphy_idx_valid(last_request->wiphy_idx))) {
struct cfg80211_registered_device *drv_last_ie;
drv_last_ie =
cfg80211_drv_by_wiphy_idx(last_request->wiphy_idx);
/*
* Lets keep this simple -- we trust the first AP
* after we intersect with CRDA
*/
if (likely(&drv_last_ie->wiphy == wiphy)) {
/*
* Ignore IEs coming in on this wiphy with
* the same alpha2 and environment cap
*/
if (likely(alpha2_equal(drv_last_ie->country_ie_alpha2,
alpha2) &&
env == drv_last_ie->env)) {
goto out;
}
/*
* the wiphy moved on to another BSSID or the AP
* was reconfigured. XXX: We need to deal with the
* case where the user suspends and goes to goes
* to another country, and then gets IEs from an
* AP with different settings
*/
goto out;
} else {
/*
* Ignore IEs coming in on two separate wiphys with
* the same alpha2 and environment cap
*/
if (likely(alpha2_equal(drv_last_ie->country_ie_alpha2,
alpha2) &&
env == drv_last_ie->env)) {
goto out;
}
/* We could potentially intersect though */
goto out;
}
}
rd = country_ie_2_rd(country_ie, country_ie_len, &checksum);
if (!rd)
goto out;
/*
* This will not happen right now but we leave it here for the
* the future when we want to add suspend/resume support and having
* the user move to another country after doing so, or having the user
* move to another AP. Right now we just trust the first AP.
*
* If we hit this before we add this support we want to be informed of
* it as it would indicate a mistake in the current design
*/
if (WARN_ON(reg_same_country_ie_hint(wiphy, checksum)))
goto free_rd_out;
request = kzalloc(sizeof(struct regulatory_request), GFP_KERNEL);
if (!request)
goto free_rd_out;
/*
* We keep this around for when CRDA comes back with a response so
* we can intersect with that
*/
country_ie_regdomain = rd;
request->wiphy_idx = get_wiphy_idx(wiphy);
request->alpha2[0] = rd->alpha2[0];
request->alpha2[1] = rd->alpha2[1];
request->initiator = REGDOM_SET_BY_COUNTRY_IE;
request->country_ie_checksum = checksum;
request->country_ie_env = env;
mutex_unlock(&cfg80211_mutex);
queue_regulatory_request(request);
return;
free_rd_out:
kfree(rd);
out:
mutex_unlock(&cfg80211_mutex);
}
EXPORT_SYMBOL(regulatory_hint_11d);
static bool freq_is_chan_12_13_14(u16 freq)
{
if (freq == ieee80211_channel_to_frequency(12) ||
freq == ieee80211_channel_to_frequency(13) ||
freq == ieee80211_channel_to_frequency(14))
return true;
return false;
}
int regulatory_hint_found_beacon(struct wiphy *wiphy,
struct ieee80211_channel *beacon_chan,
gfp_t gfp)
{
struct reg_beacon *reg_beacon;
if (likely((beacon_chan->beacon_found ||
(beacon_chan->flags & IEEE80211_CHAN_RADAR) ||
(beacon_chan->band == IEEE80211_BAND_2GHZ &&
!freq_is_chan_12_13_14(beacon_chan->center_freq)))))
return 0;
reg_beacon = kzalloc(sizeof(struct reg_beacon), gfp);
if (!reg_beacon)
return -ENOMEM;
#ifdef CONFIG_CFG80211_REG_DEBUG
printk(KERN_DEBUG "cfg80211: Found new beacon on "
"frequency: %d MHz (Ch %d) on %s\n",
beacon_chan->center_freq,
ieee80211_frequency_to_channel(beacon_chan->center_freq),
wiphy_name(wiphy));
#endif
memcpy(&reg_beacon->chan, beacon_chan,
sizeof(struct ieee80211_channel));
/*
* Since we can be called from BH or and non-BH context
* we must use spin_lock_bh()
*/
spin_lock_bh(&reg_pending_beacons_lock);
list_add_tail(&reg_beacon->list, &reg_pending_beacons);
spin_unlock_bh(&reg_pending_beacons_lock);
schedule_work(&reg_work);
return 0;
}
static void print_rd_rules(const struct ieee80211_regdomain *rd)
{
unsigned int i;
const struct ieee80211_reg_rule *reg_rule = NULL;
const struct ieee80211_freq_range *freq_range = NULL;
const struct ieee80211_power_rule *power_rule = NULL;
printk(KERN_INFO "\t(start_freq - end_freq @ bandwidth), "
"(max_antenna_gain, max_eirp)\n");
for (i = 0; i < rd->n_reg_rules; i++) {
reg_rule = &rd->reg_rules[i];
freq_range = &reg_rule->freq_range;
power_rule = &reg_rule->power_rule;
/*
* There may not be documentation for max antenna gain
* in certain regions
*/
if (power_rule->max_antenna_gain)
printk(KERN_INFO "\t(%d KHz - %d KHz @ %d KHz), "
"(%d mBi, %d mBm)\n",
freq_range->start_freq_khz,
freq_range->end_freq_khz,
freq_range->max_bandwidth_khz,
power_rule->max_antenna_gain,
power_rule->max_eirp);
else
printk(KERN_INFO "\t(%d KHz - %d KHz @ %d KHz), "
"(N/A, %d mBm)\n",
freq_range->start_freq_khz,
freq_range->end_freq_khz,
freq_range->max_bandwidth_khz,
power_rule->max_eirp);
}
}
static void print_regdomain(const struct ieee80211_regdomain *rd)
{
if (is_intersected_alpha2(rd->alpha2)) {
if (last_request->initiator == REGDOM_SET_BY_COUNTRY_IE) {
struct cfg80211_registered_device *drv;
drv = cfg80211_drv_by_wiphy_idx(
last_request->wiphy_idx);
if (drv) {
printk(KERN_INFO "cfg80211: Current regulatory "
"domain updated by AP to: %c%c\n",
drv->country_ie_alpha2[0],
drv->country_ie_alpha2[1]);
} else
printk(KERN_INFO "cfg80211: Current regulatory "
"domain intersected: \n");
} else
printk(KERN_INFO "cfg80211: Current regulatory "
"domain intersected: \n");
} else if (is_world_regdom(rd->alpha2))
printk(KERN_INFO "cfg80211: World regulatory "
"domain updated:\n");
else {
if (is_unknown_alpha2(rd->alpha2))
printk(KERN_INFO "cfg80211: Regulatory domain "
"changed to driver built-in settings "
"(unknown country)\n");
else
printk(KERN_INFO "cfg80211: Regulatory domain "
"changed to country: %c%c\n",
rd->alpha2[0], rd->alpha2[1]);
}
print_rd_rules(rd);
}
static void print_regdomain_info(const struct ieee80211_regdomain *rd)
{
printk(KERN_INFO "cfg80211: Regulatory domain: %c%c\n",
rd->alpha2[0], rd->alpha2[1]);
print_rd_rules(rd);
}
#ifdef CONFIG_CFG80211_REG_DEBUG
static void reg_country_ie_process_debug(
const struct ieee80211_regdomain *rd,
const struct ieee80211_regdomain *country_ie_regdomain,
const struct ieee80211_regdomain *intersected_rd)
{
printk(KERN_DEBUG "cfg80211: Received country IE:\n");
print_regdomain_info(country_ie_regdomain);
printk(KERN_DEBUG "cfg80211: CRDA thinks this should applied:\n");
print_regdomain_info(rd);
if (intersected_rd) {
printk(KERN_DEBUG "cfg80211: We intersect both of these "
"and get:\n");
print_regdomain_info(intersected_rd);
return;
}
printk(KERN_DEBUG "cfg80211: Intersection between both failed\n");
}
#else
static inline void reg_country_ie_process_debug(
const struct ieee80211_regdomain *rd,
const struct ieee80211_regdomain *country_ie_regdomain,
const struct ieee80211_regdomain *intersected_rd)
{
}
#endif
/* Takes ownership of rd only if it doesn't fail */
static int __set_regdom(const struct ieee80211_regdomain *rd)
{
const struct ieee80211_regdomain *intersected_rd = NULL;
struct cfg80211_registered_device *drv = NULL;
struct wiphy *request_wiphy;
/* Some basic sanity checks first */
if (is_world_regdom(rd->alpha2)) {
if (WARN_ON(!reg_is_valid_request(rd->alpha2)))
return -EINVAL;
update_world_regdomain(rd);
return 0;
}
if (!is_alpha2_set(rd->alpha2) && !is_an_alpha2(rd->alpha2) &&
!is_unknown_alpha2(rd->alpha2))
return -EINVAL;
if (!last_request)
return -EINVAL;
/*
* Lets only bother proceeding on the same alpha2 if the current
* rd is non static (it means CRDA was present and was used last)
* and the pending request came in from a country IE
*/
if (last_request->initiator != REGDOM_SET_BY_COUNTRY_IE) {
/*
* If someone else asked us to change the rd lets only bother
* checking if the alpha2 changes if CRDA was already called
*/
if (!is_old_static_regdom(cfg80211_regdomain) &&
!regdom_changes(rd->alpha2))
return -EINVAL;
}
/*
* Now lets set the regulatory domain, update all driver channels
* and finally inform them of what we have done, in case they want
* to review or adjust their own settings based on their own
* internal EEPROM data
*/
if (WARN_ON(!reg_is_valid_request(rd->alpha2)))
return -EINVAL;
if (!is_valid_rd(rd)) {
printk(KERN_ERR "cfg80211: Invalid "
"regulatory domain detected:\n");
print_regdomain_info(rd);
return -EINVAL;
}
request_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx);
if (!last_request->intersect) {
int r;
if (last_request->initiator != REGDOM_SET_BY_DRIVER) {
reset_regdomains();
cfg80211_regdomain = rd;
return 0;
}
/*
* For a driver hint, lets copy the regulatory domain the
* driver wanted to the wiphy to deal with conflicts
*/
BUG_ON(request_wiphy->regd);
r = reg_copy_regd(&request_wiphy->regd, rd);
if (r)
return r;
reset_regdomains();
cfg80211_regdomain = rd;
return 0;
}
/* Intersection requires a bit more work */
if (last_request->initiator != REGDOM_SET_BY_COUNTRY_IE) {
intersected_rd = regdom_intersect(rd, cfg80211_regdomain);
if (!intersected_rd)
return -EINVAL;
/*
* We can trash what CRDA provided now.
* However if a driver requested this specific regulatory
* domain we keep it for its private use
*/
if (last_request->initiator == REGDOM_SET_BY_DRIVER)
request_wiphy->regd = rd;
else
kfree(rd);
rd = NULL;
reset_regdomains();
cfg80211_regdomain = intersected_rd;
return 0;
}
/*
* Country IE requests are handled a bit differently, we intersect
* the country IE rd with what CRDA believes that country should have
*/
BUG_ON(!country_ie_regdomain);
if (rd != country_ie_regdomain) {
/*
* Intersect what CRDA returned and our what we
* had built from the Country IE received
*/
intersected_rd = regdom_intersect(rd, country_ie_regdomain);
reg_country_ie_process_debug(rd, country_ie_regdomain,
intersected_rd);
kfree(country_ie_regdomain);
country_ie_regdomain = NULL;
} else {
/*
* This would happen when CRDA was not present and
* OLD_REGULATORY was enabled. We intersect our Country
* IE rd and what was set on cfg80211 originally
*/
intersected_rd = regdom_intersect(rd, cfg80211_regdomain);
}
if (!intersected_rd)
return -EINVAL;
drv = wiphy_to_dev(request_wiphy);
drv->country_ie_alpha2[0] = rd->alpha2[0];
drv->country_ie_alpha2[1] = rd->alpha2[1];
drv->env = last_request->country_ie_env;
BUG_ON(intersected_rd == rd);
kfree(rd);
rd = NULL;
reset_regdomains();
cfg80211_regdomain = intersected_rd;
return 0;
}
/*
* Use this call to set the current regulatory domain. Conflicts with
* multiple drivers can be ironed out later. Caller must've already
* kmalloc'd the rd structure. Caller must hold cfg80211_mutex
*/
int set_regdom(const struct ieee80211_regdomain *rd)
{
int r;
assert_cfg80211_lock();
/* Note that this doesn't update the wiphys, this is done below */
r = __set_regdom(rd);
if (r) {
kfree(rd);
return r;
}
/* This would make this whole thing pointless */
if (!last_request->intersect)
BUG_ON(rd != cfg80211_regdomain);
/* update all wiphys now with the new established regulatory domain */
update_all_wiphy_regulatory(last_request->initiator);
print_regdomain(cfg80211_regdomain);
return r;
}
/* Caller must hold cfg80211_mutex */
void reg_device_remove(struct wiphy *wiphy)
{
struct wiphy *request_wiphy;
assert_cfg80211_lock();
request_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx);
kfree(wiphy->regd);
if (!last_request || !request_wiphy)
return;
if (request_wiphy != wiphy)
return;
last_request->wiphy_idx = WIPHY_IDX_STALE;
last_request->country_ie_env = ENVIRON_ANY;
}
int regulatory_init(void)
{
int err = 0;
reg_pdev = platform_device_register_simple("regulatory", 0, NULL, 0);
if (IS_ERR(reg_pdev))
return PTR_ERR(reg_pdev);
spin_lock_init(&reg_requests_lock);
spin_lock_init(&reg_pending_beacons_lock);
#ifdef CONFIG_WIRELESS_OLD_REGULATORY
cfg80211_regdomain = static_regdom(ieee80211_regdom);
printk(KERN_INFO "cfg80211: Using static regulatory domain info\n");
print_regdomain_info(cfg80211_regdomain);
/*
* The old code still requests for a new regdomain and if
* you have CRDA you get it updated, otherwise you get
* stuck with the static values. We ignore "EU" code as
* that is not a valid ISO / IEC 3166 alpha2
*/
if (ieee80211_regdom[0] != 'E' || ieee80211_regdom[1] != 'U')
err = regulatory_hint_core(ieee80211_regdom);
#else
cfg80211_regdomain = cfg80211_world_regdom;
err = regulatory_hint_core("00");
#endif
if (err) {
if (err == -ENOMEM)
return err;
/*
* N.B. kobject_uevent_env() can fail mainly for when we're out
* memory which is handled and propagated appropriately above
* but it can also fail during a netlink_broadcast() or during
* early boot for call_usermodehelper(). For now treat these
* errors as non-fatal.
*/
printk(KERN_ERR "cfg80211: kobject_uevent_env() was unable "
"to call CRDA during init");
#ifdef CONFIG_CFG80211_REG_DEBUG
/* We want to find out exactly why when debugging */
WARN_ON(err);
#endif
}
return 0;
}
void regulatory_exit(void)
{
struct regulatory_request *reg_request, *tmp;
struct reg_beacon *reg_beacon, *btmp;
cancel_work_sync(&reg_work);
mutex_lock(&cfg80211_mutex);
reset_regdomains();
kfree(country_ie_regdomain);
country_ie_regdomain = NULL;
kfree(last_request);
platform_device_unregister(reg_pdev);
spin_lock_bh(&reg_pending_beacons_lock);
if (!list_empty(&reg_pending_beacons)) {
list_for_each_entry_safe(reg_beacon, btmp,
&reg_pending_beacons, list) {
list_del(&reg_beacon->list);
kfree(reg_beacon);
}
}
spin_unlock_bh(&reg_pending_beacons_lock);
if (!list_empty(&reg_beacon_list)) {
list_for_each_entry_safe(reg_beacon, btmp,
&reg_beacon_list, list) {
list_del(&reg_beacon->list);
kfree(reg_beacon);
}
}
spin_lock(&reg_requests_lock);
if (!list_empty(&reg_requests_list)) {
list_for_each_entry_safe(reg_request, tmp,
&reg_requests_list, list) {
list_del(&reg_request->list);
kfree(reg_request);
}
}
spin_unlock(&reg_requests_lock);
mutex_unlock(&cfg80211_mutex);
}
Reference in New Issue View Git Blame Copy Permalink