linux_dsm_epyc7002/drivers/usb
Mathias Nyman d92f2c59cc xhci: Don't let USB3 ports stuck in polling state prevent suspend
Commit 2f31a67f01 ("usb: xhci: Prevent bus suspend if a port connect
change or polling state is detected") was intended to prevent ports that
were still link training from being forced to U3 suspend state mid
enumeration.
This solved enumeration issues for devices with slow link training.

Turns out some devices are stuck in the link training/polling state,
and thus that patch will prevent suspend completely for these devices.
This is seen with USB3 card readers in some MacBooks.

Instead of preventing suspend, give some time to complete the link
training. On successful training the port will end up as connected
and enabled.
If port instead is stuck in link training the bus suspend will continue
suspending after 360ms (10 * 36ms) timeout (tPollingLFPSTimeout).

Original patch was sent to stable, this one should go there as well

Fixes: 2f31a67f01 ("usb: xhci: Prevent bus suspend if a port connect change or polling state is detected")
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-22 17:16:05 +01:00
..
atm USB: add missing SPDX lines to Kconfig and Makefiles 2019-01-22 09:08:17 +01:00
c67x00 USB: add SPDX identifiers to all remaining Makefiles 2017-11-07 15:53:48 +01:00
chipidea usb: chipidea: Refactor USB PHY selection and keep a single PHY 2019-02-27 15:51:02 +01:00
class cdc-wdm: pass return value of recover_from_urb_loss 2019-02-19 14:41:38 +01:00
common usb: common: Consider only available nodes for dr_mode 2019-03-19 14:57:32 +01:00
core USB/PHY patches for 5.1-rc1 2019-03-06 16:48:27 -08:00
dwc2 usb: dwc2: use struct_size() in kzalloc() 2019-02-19 14:41:38 +01:00
dwc3 usb: dwc3: drd: Defer probe if extcon device is not found 2019-02-19 15:08:07 +01:00
early memblock: drop memblock_alloc_*_nopanic() variants 2019-03-12 10:04:02 -07:00
gadget SCSI misc on 20190306 2019-03-09 16:53:47 -08:00
host xhci: Don't let USB3 ports stuck in polling state prevent suspend 2019-03-22 17:16:05 +01:00
image USB: add missing SPDX lines to Kconfig and Makefiles 2019-01-22 09:08:17 +01:00
isp1760 USB: add missing SPDX lines to Kconfig and Makefiles 2019-01-22 09:08:17 +01:00
misc usb: usb251xb: Remove unnecessary comparison of unsigned integer with >= 0 2019-03-19 15:10:55 +01:00
mon USB: add missing SPDX lines to Kconfig and Makefiles 2019-01-22 09:08:17 +01:00
mtu3 USB: add missing SPDX lines to Kconfig and Makefiles 2019-01-22 09:08:17 +01:00
musb USB: musb: mark expected switch fall-through 2019-02-13 19:40:20 +01:00
phy USB: changes for v5.1 merge window 2019-02-15 09:08:57 +01:00
renesas_usbhs USB: renesas_usbhs: fix spelling mistake "doens't" -> "doesn't" 2019-02-19 14:41:38 +01:00
roles usb: roles: Find the muxes by also matching against the device node 2019-02-14 10:52:25 +01:00
serial USB-serial fixes for 5.1-rc1 2019-02-21 17:28:50 +01:00
storage SCSI misc on 20190306 2019-03-09 16:53:47 -08:00
typec usb: typec: tcpm: Try PD-2.0 if sink does not respond to 3.0 source-caps 2019-03-19 14:57:31 +01:00
usbip usbip: Fix vep_free_request() null pointer checks on input args 2019-01-30 09:22:35 +01:00
wusbcore wusb: Remove unnecessary static function ckhdid_printf 2019-03-01 20:53:41 +01:00
Kconfig USB: add missing SPDX lines to Kconfig and Makefiles 2019-01-22 09:08:17 +01:00
Makefile usb: roles: Add Intel xHCI USB role switch driver 2018-03-22 13:49:27 +01:00
usb-skeleton.c usb: usb-skeleton: use irqsave() in USB's complete callback 2018-06-28 19:36:06 +09:00