AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-28 11:18:45 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
d9265e8a87
linux_dsm_epyc7002/drivers/usb/serial/spcp8x5.c
Greg Kroah-Hartman 6ca98bc284 USB: serial: Remove redundant license text 
Now that the SPDX tag is in all USB files, that identifies the license
in a specific and legally-defined manner.  So the extra GPL text wording
can be removed as it is no longer needed at all.

This is done on a quest to remove the 700+ different ways that files in
the kernel describe the GPL license text.  And there's unneeded stuff
like the address (sometimes incorrect) for the FSF which is never
needed.

No copyright headers or other non-license-description text was removed.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-04 11:55:38 +01:00

496 lines
13 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* spcp8x5 USB to serial adaptor driver
*
* Copyright (C) 2010-2013 Johan Hovold (jhovold@gmail.com)
* Copyright (C) 2006 Linxb (xubin.lin@worldplus.com.cn)
* Copyright (C) 2006 S1 Corp.
*
* Original driver for 2.6.10 pl2303 driver by
* Greg Kroah-Hartman (greg@kroah.com)
* Changes for 2.6.20 by Harald Klein <hari@vt100.at>
*/
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
#define DRIVER_DESC "SPCP8x5 USB to serial adaptor driver"
#define SPCP825_QUIRK_NO_UART_STATUS 0x01
#define SPCP825_QUIRK_NO_WORK_MODE 0x02
#define SPCP8x5_007_VID 0x04FC
#define SPCP8x5_007_PID 0x0201
#define SPCP8x5_008_VID 0x04fc
#define SPCP8x5_008_PID 0x0235
#define SPCP8x5_PHILIPS_VID 0x0471
#define SPCP8x5_PHILIPS_PID 0x081e
#define SPCP8x5_INTERMATIC_VID 0x04FC
#define SPCP8x5_INTERMATIC_PID 0x0204
#define SPCP8x5_835_VID 0x04fc
#define SPCP8x5_835_PID 0x0231
static const struct usb_device_id id_table[] = {
{ USB_DEVICE(SPCP8x5_PHILIPS_VID , SPCP8x5_PHILIPS_PID)},
{ USB_DEVICE(SPCP8x5_INTERMATIC_VID, SPCP8x5_INTERMATIC_PID)},
{ USB_DEVICE(SPCP8x5_835_VID, SPCP8x5_835_PID)},
{ USB_DEVICE(SPCP8x5_008_VID, SPCP8x5_008_PID)},
{ USB_DEVICE(SPCP8x5_007_VID, SPCP8x5_007_PID),
.driver_info = SPCP825_QUIRK_NO_UART_STATUS |
SPCP825_QUIRK_NO_WORK_MODE },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, id_table);
struct spcp8x5_usb_ctrl_arg {
u8 type;
u8 cmd;
u8 cmd_type;
u16 value;
u16 index;
u16 length;
};
/* spcp8x5 spec register define */
#define MCR_CONTROL_LINE_RTS 0x02
#define MCR_CONTROL_LINE_DTR 0x01
#define MCR_DTR 0x01
#define MCR_RTS 0x02
#define MSR_STATUS_LINE_DCD 0x80
#define MSR_STATUS_LINE_RI 0x40
#define MSR_STATUS_LINE_DSR 0x20
#define MSR_STATUS_LINE_CTS 0x10
/* verdor command here , we should define myself */
#define SET_DEFAULT 0x40
#define SET_DEFAULT_TYPE 0x20
#define SET_UART_FORMAT 0x40
#define SET_UART_FORMAT_TYPE 0x21
#define SET_UART_FORMAT_SIZE_5 0x00
#define SET_UART_FORMAT_SIZE_6 0x01
#define SET_UART_FORMAT_SIZE_7 0x02
#define SET_UART_FORMAT_SIZE_8 0x03
#define SET_UART_FORMAT_STOP_1 0x00
#define SET_UART_FORMAT_STOP_2 0x04
#define SET_UART_FORMAT_PAR_NONE 0x00
#define SET_UART_FORMAT_PAR_ODD 0x10
#define SET_UART_FORMAT_PAR_EVEN 0x30
#define SET_UART_FORMAT_PAR_MASK 0xD0
#define SET_UART_FORMAT_PAR_SPACE 0x90
#define GET_UART_STATUS_TYPE 0xc0
#define GET_UART_STATUS 0x22
#define GET_UART_STATUS_MSR 0x06
#define SET_UART_STATUS 0x40
#define SET_UART_STATUS_TYPE 0x23
#define SET_UART_STATUS_MCR 0x0004
#define SET_UART_STATUS_MCR_DTR 0x01
#define SET_UART_STATUS_MCR_RTS 0x02
#define SET_UART_STATUS_MCR_LOOP 0x10
#define SET_WORKING_MODE 0x40
#define SET_WORKING_MODE_TYPE 0x24
#define SET_WORKING_MODE_U2C 0x00
#define SET_WORKING_MODE_RS485 0x01
#define SET_WORKING_MODE_PDMA 0x02
#define SET_WORKING_MODE_SPP 0x03
#define SET_FLOWCTL_CHAR 0x40
#define SET_FLOWCTL_CHAR_TYPE 0x25
#define GET_VERSION 0xc0
#define GET_VERSION_TYPE 0x26
#define SET_REGISTER 0x40
#define SET_REGISTER_TYPE 0x27
#define GET_REGISTER 0xc0
#define GET_REGISTER_TYPE 0x28
#define SET_RAM 0x40
#define SET_RAM_TYPE 0x31
#define GET_RAM 0xc0
#define GET_RAM_TYPE 0x32
/* how come ??? */
#define UART_STATE 0x08
#define UART_STATE_TRANSIENT_MASK 0x75
#define UART_DCD 0x01
#define UART_DSR 0x02
#define UART_BREAK_ERROR 0x04
#define UART_RING 0x08
#define UART_FRAME_ERROR 0x10
#define UART_PARITY_ERROR 0x20
#define UART_OVERRUN_ERROR 0x40
#define UART_CTS 0x80
struct spcp8x5_private {
unsigned quirks;
spinlock_t lock;
u8 line_control;
};
static int spcp8x5_probe(struct usb_serial *serial,
const struct usb_device_id *id)
{
usb_set_serial_data(serial, (void *)id);
return 0;
}
static int spcp8x5_port_probe(struct usb_serial_port *port)
{
const struct usb_device_id *id = usb_get_serial_data(port->serial);
struct spcp8x5_private *priv;
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
spin_lock_init(&priv->lock);
priv->quirks = id->driver_info;
usb_set_serial_port_data(port, priv);
port->port.drain_delay = 256;
return 0;
}
static int spcp8x5_port_remove(struct usb_serial_port *port)
{
struct spcp8x5_private *priv;
priv = usb_get_serial_port_data(port);
kfree(priv);
return 0;
}
static int spcp8x5_set_ctrl_line(struct usb_serial_port *port, u8 mcr)
{
struct spcp8x5_private *priv = usb_get_serial_port_data(port);
struct usb_device *dev = port->serial->dev;
int retval;
if (priv->quirks & SPCP825_QUIRK_NO_UART_STATUS)
return -EPERM;
retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
SET_UART_STATUS_TYPE, SET_UART_STATUS,
mcr, 0x04, NULL, 0, 100);
if (retval != 0) {
dev_err(&port->dev, "failed to set control lines: %d\n",
retval);
}
return retval;
}
static int spcp8x5_get_msr(struct usb_serial_port *port, u8 *status)
{
struct spcp8x5_private *priv = usb_get_serial_port_data(port);
struct usb_device *dev = port->serial->dev;
u8 *buf;
int ret;
if (priv->quirks & SPCP825_QUIRK_NO_UART_STATUS)
return -EPERM;
buf = kzalloc(1, GFP_KERNEL);
if (!buf)
return -ENOMEM;
ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
GET_UART_STATUS, GET_UART_STATUS_TYPE,
0, GET_UART_STATUS_MSR, buf, 1, 100);
if (ret < 1) {
dev_err(&port->dev, "failed to get modem status: %d\n", ret);
if (ret >= 0)
ret = -EIO;
goto out;
}
dev_dbg(&port->dev, "0xc0:0x22:0:6 %d - 0x02%x\n", ret, *buf);
*status = *buf;
ret = 0;
out:
kfree(buf);
return ret;
}
static void spcp8x5_set_work_mode(struct usb_serial_port *port, u16 value,
u16 index)
{
struct spcp8x5_private *priv = usb_get_serial_port_data(port);
struct usb_device *dev = port->serial->dev;
int ret;
if (priv->quirks & SPCP825_QUIRK_NO_WORK_MODE)
return;
ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
SET_WORKING_MODE_TYPE, SET_WORKING_MODE,
value, index, NULL, 0, 100);
dev_dbg(&port->dev, "value = %#x , index = %#x\n", value, index);
if (ret < 0)
dev_err(&port->dev, "failed to set work mode: %d\n", ret);
}
static int spcp8x5_carrier_raised(struct usb_serial_port *port)
{
u8 msr;
int ret;
ret = spcp8x5_get_msr(port, &msr);
if (ret || msr & MSR_STATUS_LINE_DCD)
return 1;
return 0;
}
static void spcp8x5_dtr_rts(struct usb_serial_port *port, int on)
{
struct spcp8x5_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
u8 control;
spin_lock_irqsave(&priv->lock, flags);
if (on)
priv->line_control = MCR_CONTROL_LINE_DTR
| MCR_CONTROL_LINE_RTS;
else
priv->line_control &= ~ (MCR_CONTROL_LINE_DTR
| MCR_CONTROL_LINE_RTS);
control = priv->line_control;
spin_unlock_irqrestore(&priv->lock, flags);
spcp8x5_set_ctrl_line(port, control);
}
static void spcp8x5_init_termios(struct tty_struct *tty)
{
tty->termios = tty_std_termios;
tty->termios.c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL;
tty->termios.c_ispeed = 115200;
tty->termios.c_ospeed = 115200;
}
static void spcp8x5_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios)
{
struct usb_serial *serial = port->serial;
struct spcp8x5_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
unsigned int cflag = tty->termios.c_cflag;
unsigned short uartdata;
unsigned char buf[2] = {0, 0};
int baud;
int i;
u8 control;
/* check that they really want us to change something */
if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios))
return;
/* set DTR/RTS active */
spin_lock_irqsave(&priv->lock, flags);
control = priv->line_control;
if (old_termios && (old_termios->c_cflag & CBAUD) == B0) {
priv->line_control |= MCR_DTR;
if (!(old_termios->c_cflag & CRTSCTS))
priv->line_control |= MCR_RTS;
}
if (control != priv->line_control) {
control = priv->line_control;
spin_unlock_irqrestore(&priv->lock, flags);
spcp8x5_set_ctrl_line(port, control);
} else {
spin_unlock_irqrestore(&priv->lock, flags);
}
/* Set Baud Rate */
baud = tty_get_baud_rate(tty);
switch (baud) {
case 300: buf[0] = 0x00; break;
case 600: buf[0] = 0x01; break;
case 1200: buf[0] = 0x02; break;
case 2400: buf[0] = 0x03; break;
case 4800: buf[0] = 0x04; break;
case 9600: buf[0] = 0x05; break;
case 19200: buf[0] = 0x07; break;
case 38400: buf[0] = 0x09; break;
case 57600: buf[0] = 0x0a; break;
case 115200: buf[0] = 0x0b; break;
case 230400: buf[0] = 0x0c; break;
case 460800: buf[0] = 0x0d; break;
case 921600: buf[0] = 0x0e; break;
/* case 1200000: buf[0] = 0x0f; break; */
/* case 2400000: buf[0] = 0x10; break; */
case 3000000: buf[0] = 0x11; break;
/* case 6000000: buf[0] = 0x12; break; */
case 0:
case 1000000:
buf[0] = 0x0b; break;
default:
dev_err(&port->dev, "unsupported baudrate, using 9600\n");
}
/* Set Data Length : 00:5bit, 01:6bit, 10:7bit, 11:8bit */
switch (cflag & CSIZE) {
case CS5:
buf[1] |= SET_UART_FORMAT_SIZE_5;
break;
case CS6:
buf[1] |= SET_UART_FORMAT_SIZE_6;
break;
case CS7:
buf[1] |= SET_UART_FORMAT_SIZE_7;
break;
default:
case CS8:
buf[1] |= SET_UART_FORMAT_SIZE_8;
break;
}
/* Set Stop bit2 : 0:1bit 1:2bit */
buf[1] |= (cflag & CSTOPB) ? SET_UART_FORMAT_STOP_2 :
SET_UART_FORMAT_STOP_1;
/* Set Parity bit3-4 01:Odd 11:Even */
if (cflag & PARENB) {
buf[1] |= (cflag & PARODD) ?
SET_UART_FORMAT_PAR_ODD : SET_UART_FORMAT_PAR_EVEN ;
} else {
buf[1] |= SET_UART_FORMAT_PAR_NONE;
}
uartdata = buf[0] | buf[1]<<8;
i = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
SET_UART_FORMAT_TYPE, SET_UART_FORMAT,
uartdata, 0, NULL, 0, 100);
if (i < 0)
dev_err(&port->dev, "Set UART format %#x failed (error = %d)\n",
uartdata, i);
dev_dbg(&port->dev, "0x21:0x40:0:0 %d\n", i);
if (cflag & CRTSCTS) {
/* enable hardware flow control */
spcp8x5_set_work_mode(port, 0x000a, SET_WORKING_MODE_U2C);
}
}
static int spcp8x5_open(struct tty_struct *tty, struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
struct spcp8x5_private *priv = usb_get_serial_port_data(port);
int ret;
usb_clear_halt(serial->dev, port->write_urb->pipe);
usb_clear_halt(serial->dev, port->read_urb->pipe);
ret = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
0x09, 0x00,
0x01, 0x00, NULL, 0x00, 100);
if (ret)
return ret;
spcp8x5_set_ctrl_line(port, priv->line_control);
if (tty)
spcp8x5_set_termios(tty, port, NULL);
return usb_serial_generic_open(tty, port);
}
static int spcp8x5_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
struct usb_serial_port *port = tty->driver_data;
struct spcp8x5_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
u8 control;
spin_lock_irqsave(&priv->lock, flags);
if (set & TIOCM_RTS)
priv->line_control |= MCR_RTS;
if (set & TIOCM_DTR)
priv->line_control |= MCR_DTR;
if (clear & TIOCM_RTS)
priv->line_control &= ~MCR_RTS;
if (clear & TIOCM_DTR)
priv->line_control &= ~MCR_DTR;
control = priv->line_control;
spin_unlock_irqrestore(&priv->lock, flags);
return spcp8x5_set_ctrl_line(port, control);
}
static int spcp8x5_tiocmget(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct spcp8x5_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
unsigned int mcr;
u8 status;
unsigned int result;
result = spcp8x5_get_msr(port, &status);
if (result)
return result;
spin_lock_irqsave(&priv->lock, flags);
mcr = priv->line_control;
spin_unlock_irqrestore(&priv->lock, flags);
result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0)
| ((mcr & MCR_RTS) ? TIOCM_RTS : 0)
| ((status & MSR_STATUS_LINE_CTS) ? TIOCM_CTS : 0)
| ((status & MSR_STATUS_LINE_DSR) ? TIOCM_DSR : 0)
| ((status & MSR_STATUS_LINE_RI) ? TIOCM_RI : 0)
| ((status & MSR_STATUS_LINE_DCD) ? TIOCM_CD : 0);
return result;
}
static struct usb_serial_driver spcp8x5_device = {
.driver = {
.owner = THIS_MODULE,
.name = "SPCP8x5",
},
.id_table = id_table,
.num_ports = 1,
.num_bulk_in = 1,
.num_bulk_out = 1,
.open = spcp8x5_open,
.dtr_rts = spcp8x5_dtr_rts,
.carrier_raised = spcp8x5_carrier_raised,
.set_termios = spcp8x5_set_termios,
.init_termios = spcp8x5_init_termios,
.tiocmget = spcp8x5_tiocmget,
.tiocmset = spcp8x5_tiocmset,
.probe = spcp8x5_probe,
.port_probe = spcp8x5_port_probe,
.port_remove = spcp8x5_port_remove,
};
static struct usb_serial_driver * const serial_drivers[] = {
&spcp8x5_device, NULL
};
module_usb_serial_driver(serial_drivers, id_table);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
Reference in New Issue View Git Blame Copy Permalink