linux_dsm_epyc7002/arch/arm/boot/dts/sh73a0.dtsi
Kevin Hilman 7587b5965f Changes needed to prepare for making omap3 device tree only:
- Always build in board-generic, and add pdata quirks and auxdata
   support for it so we have all the pdata related quirks
   in the same place.
 
 - Merge of the drivers/pinctrl changes that are needed for PM
   to continue working on omap3 and also needed for other omaps
   eventually. The three pinctrl related patches have been acked
   by Linus Walleij and are pulled into both the pinctrl tree
   and this branch.
 
 - Few defconfig related changes for drivers needed.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJSWIMoAAoJEBvUPslcq6VzudIQAKVjdFI26yxmI3xpYjNVS2P8
 JWaUTTjHAR7Lc0EWwtuGj6CqCtbNXUH1bTnChQrkzhT7fPMGQGFbgErnoaYQdwwJ
 qI15T7qcwy4q54vzeaOMAUS9UNZzr4lChEvxt9uYNoEhHlu7i6/ntyk5fgRfHMsh
 yK439VA7W/2rLNinpUmIAghx6+gUuRIBbVtfJ71gg5roXL7fY2hYizEoIkDKqWSD
 i1F24Xt33LAjNhy3n4/6JxCldee7ib2z0YrOUOrTdXWh/L1G9tDTslkdga6rAA5c
 A+B4nP7zP7i9c1SlTPbwRyguwjHhfSPuNTRhyhuePbwVk4bscglQZx8A7dH8BwS0
 pSCUxCTe2+CPEEzeN/ee9TgXwyX9Ab/r5BM092xFrX2lBbV3KxPl1F7rAxJ4HQTu
 Bh/M5bnKGupO7H9MOKqmLAf1y3a3JCrXVUuQljDMJnvauB8QFTx0nYQvZ/bQCJLZ
 /wfADHtooJ/FGHFS7Vb+HSLX7ifF2HyES9FgnQag5H77VfXS+bqI5yHsTcYHTgP1
 MlW8mObg0vJ+oUuowhhrk9pzQ1l1VFIaMqOKOouL3X6GHAHFiBSCti1fRiSE7d4U
 feW7a0NSyIjue+MAwxCjSLXOpHCATgnQ1mp9s8ByD0IF98iPugpnp9d6NGH/wp9A
 bgK7SGeOWXGoc+kN672c
 =bqsS
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v3.13/quirk-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

From Tony Lindgren:
Changes needed to prepare for making omap3 device tree only:

- Always build in board-generic, and add pdata quirks and auxdata
  support for it so we have all the pdata related quirks
  in the same place.

- Merge of the drivers/pinctrl changes that are needed for PM
  to continue working on omap3 and also needed for other omaps
  eventually. The three pinctrl related patches have been acked
  by Linus Walleij and are pulled into both the pinctrl tree
  and this branch.

- Few defconfig related changes for drivers needed.

* tag 'omap-for-v3.13/quirk-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (523 commits)
  ARM: configs: omap2plus_defconfig: enable dwc3 and dependencies
  ARM: OMAP2+: Add WLAN modules and of_serial to omap2plus_defconfig
  ARM: OMAP2+: Run make savedefconfig on omap2plus_defconfig to shrink it
  ARM: OMAP2+: Add minimal 8250 support for GPMC
  ARM: OMAP2+: Use pdata quirks for wl12xx for omap3 evm and zoom3
  ARM: OMAP: Move DT wake-up event handling over to use pinctrl-single-omap
  ARM: OMAP2+: Add support for auxdata
  pinctrl: single: Add support for auxdata
  pinctrl: single: Add support for wake-up interrupts
  pinctrl: single: Prepare for supporting SoC specific features
  ARM: OMAP2+: igep0020: use display init from dss-common
  ARM: OMAP2+: pdata-quirks: add legacy display init for IGEPv2 board
  +Linux 3.12-rc4

Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-10-14 15:29:24 -07:00

245 lines
4.9 KiB
Plaintext

/*
* Device Tree Source for the SH73A0 SoC
*
* Copyright (C) 2012 Renesas Solutions Corp.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
/include/ "skeleton.dtsi"
/ {
compatible = "renesas,sh73a0";
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <1>;
};
};
gic: interrupt-controller@f0001000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
#address-cells = <1>;
interrupt-controller;
reg = <0xf0001000 0x1000>,
<0xf0000100 0x100>;
};
pmu {
compatible = "arm,cortex-a9-pmu";
interrupts = <0 55 4>,
<0 56 4>;
};
irqpin0: irqpin@e6900000 {
compatible = "renesas,intc-irqpin";
#interrupt-cells = <2>;
interrupt-controller;
reg = <0xe6900000 4>,
<0xe6900010 4>,
<0xe6900020 1>,
<0xe6900040 1>,
<0xe6900060 1>;
interrupt-parent = <&gic>;
interrupts = <0 1 0x4
0 2 0x4
0 3 0x4
0 4 0x4
0 5 0x4
0 6 0x4
0 7 0x4
0 8 0x4>;
};
irqpin1: irqpin@e6900004 {
compatible = "renesas,intc-irqpin";
#interrupt-cells = <2>;
interrupt-controller;
reg = <0xe6900004 4>,
<0xe6900014 4>,
<0xe6900024 1>,
<0xe6900044 1>,
<0xe6900064 1>;
interrupt-parent = <&gic>;
interrupts = <0 9 0x4
0 10 0x4
0 11 0x4
0 12 0x4
0 13 0x4
0 14 0x4
0 15 0x4
0 16 0x4>;
control-parent;
};
irqpin2: irqpin@e6900008 {
compatible = "renesas,intc-irqpin";
#interrupt-cells = <2>;
interrupt-controller;
reg = <0xe6900008 4>,
<0xe6900018 4>,
<0xe6900028 1>,
<0xe6900048 1>,
<0xe6900068 1>;
interrupt-parent = <&gic>;
interrupts = <0 17 0x4
0 18 0x4
0 19 0x4
0 20 0x4
0 21 0x4
0 22 0x4
0 23 0x4
0 24 0x4>;
};
irqpin3: irqpin@e690000c {
compatible = "renesas,intc-irqpin";
#interrupt-cells = <2>;
interrupt-controller;
reg = <0xe690000c 4>,
<0xe690001c 4>,
<0xe690002c 1>,
<0xe690004c 1>,
<0xe690006c 1>;
interrupt-parent = <&gic>;
interrupts = <0 25 0x4
0 26 0x4
0 27 0x4
0 28 0x4
0 29 0x4
0 30 0x4
0 31 0x4
0 32 0x4>;
};
i2c0: i2c@e6820000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0xe6820000 0x425>;
interrupt-parent = <&gic>;
interrupts = <0 167 0x4
0 168 0x4
0 169 0x4
0 170 0x4>;
status = "disabled";
};
i2c1: i2c@e6822000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0xe6822000 0x425>;
interrupt-parent = <&gic>;
interrupts = <0 51 0x4
0 52 0x4
0 53 0x4
0 54 0x4>;
status = "disabled";
};
i2c2: i2c@e6824000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0xe6824000 0x425>;
interrupt-parent = <&gic>;
interrupts = <0 171 0x4
0 172 0x4
0 173 0x4
0 174 0x4>;
status = "disabled";
};
i2c3: i2c@e6826000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0xe6826000 0x425>;
interrupt-parent = <&gic>;
interrupts = <0 183 0x4
0 184 0x4
0 185 0x4
0 186 0x4>;
status = "disabled";
};
i2c4: i2c@e6828000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0xe6828000 0x425>;
interrupt-parent = <&gic>;
interrupts = <0 187 0x4
0 188 0x4
0 189 0x4
0 190 0x4>;
status = "disabled";
};
mmcif: mmcif@e6bd0000 {
compatible = "renesas,sh-mmcif";
reg = <0xe6bd0000 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 140 0x4
0 141 0x4>;
reg-io-width = <4>;
status = "disabled";
};
sdhi0: sdhi@ee100000 {
compatible = "renesas,sdhi-r8a7740";
reg = <0xee100000 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 83 4
0 84 4
0 85 4>;
cap-sd-highspeed;
status = "disabled";
};
/* SDHI1 and SDHI2 have no CD pins, no need for CD IRQ */
sdhi1: sdhi@ee120000 {
compatible = "renesas,sdhi-r8a7740";
reg = <0xee120000 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 88 4
0 89 4>;
toshiba,mmc-wrprotect-disable;
cap-sd-highspeed;
status = "disabled";
};
sdhi2: sdhi@ee140000 {
compatible = "renesas,sdhi-r8a7740";
reg = <0xee140000 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 104 4
0 105 4>;
toshiba,mmc-wrprotect-disable;
cap-sd-highspeed;
status = "disabled";
};
pfc: pfc@e6050000 {
compatible = "renesas,pfc-sh73a0";
reg = <0xe6050000 0x8000>,
<0xe605801c 0x1c>;
gpio-controller;
#gpio-cells = <2>;
};
};