linux_dsm_epyc7002/drivers/hwmon/emc1403.c
Josef Gajdusek 3a18e1398f hwmon: (emc1403) Support full range of known chip revision numbers
The datasheet for EMC1413/EMC1414, which is fully compatible to
EMC1403/1404 and uses the same chip identification, references revision
numbers 0x01, 0x03, and 0x04. Accept the full range of revision numbers
from 0x01 to 0x04 to make sure none are missed.

Signed-off-by: Josef Gajdusek <atx@atx.name>
Cc: stable@vger.kernel.org
[Guenter Roeck: Updated headline and description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-12 08:37:06 -07:00

397 lines
12 KiB
C

/*
* emc1403.c - SMSC Thermal Driver
*
* Copyright (C) 2008 Intel Corp
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
* TODO
* - cache alarm and critical limit registers
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#include <linux/sysfs.h>
#include <linux/mutex.h>
#include <linux/jiffies.h>
#define THERMAL_PID_REG 0xfd
#define THERMAL_SMSC_ID_REG 0xfe
#define THERMAL_REVISION_REG 0xff
struct thermal_data {
struct i2c_client *client;
const struct attribute_group *groups[3];
struct mutex mutex;
/*
* Cache the hyst value so we don't keep re-reading it. In theory
* we could cache it forever as nobody else should be writing it.
*/
u8 cached_hyst;
unsigned long hyst_valid;
};
static ssize_t show_temp(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct sensor_device_attribute *sda = to_sensor_dev_attr(attr);
struct thermal_data *data = dev_get_drvdata(dev);
int retval;
retval = i2c_smbus_read_byte_data(data->client, sda->index);
if (retval < 0)
return retval;
return sprintf(buf, "%d000\n", retval);
}
static ssize_t show_bit(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct sensor_device_attribute_2 *sda = to_sensor_dev_attr_2(attr);
struct thermal_data *data = dev_get_drvdata(dev);
int retval;
retval = i2c_smbus_read_byte_data(data->client, sda->nr);
if (retval < 0)
return retval;
return sprintf(buf, "%d\n", !!(retval & sda->index));
}
static ssize_t store_temp(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct sensor_device_attribute *sda = to_sensor_dev_attr(attr);
struct thermal_data *data = dev_get_drvdata(dev);
unsigned long val;
int retval;
if (kstrtoul(buf, 10, &val))
return -EINVAL;
retval = i2c_smbus_write_byte_data(data->client, sda->index,
DIV_ROUND_CLOSEST(val, 1000));
if (retval < 0)
return retval;
return count;
}
static ssize_t store_bit(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct sensor_device_attribute_2 *sda = to_sensor_dev_attr_2(attr);
struct thermal_data *data = dev_get_drvdata(dev);
struct i2c_client *client = data->client;
unsigned long val;
int retval;
if (kstrtoul(buf, 10, &val))
return -EINVAL;
mutex_lock(&data->mutex);
retval = i2c_smbus_read_byte_data(client, sda->nr);
if (retval < 0)
goto fail;
retval &= ~sda->index;
if (val)
retval |= sda->index;
retval = i2c_smbus_write_byte_data(client, sda->index, retval);
if (retval == 0)
retval = count;
fail:
mutex_unlock(&data->mutex);
return retval;
}
static ssize_t show_hyst(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct sensor_device_attribute *sda = to_sensor_dev_attr(attr);
struct thermal_data *data = dev_get_drvdata(dev);
struct i2c_client *client = data->client;
int retval;
int hyst;
retval = i2c_smbus_read_byte_data(client, sda->index);
if (retval < 0)
return retval;
if (time_after(jiffies, data->hyst_valid)) {
hyst = i2c_smbus_read_byte_data(client, 0x21);
if (hyst < 0)
return retval;
data->cached_hyst = hyst;
data->hyst_valid = jiffies + HZ;
}
return sprintf(buf, "%d000\n", retval - data->cached_hyst);
}
static ssize_t store_hyst(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct sensor_device_attribute *sda = to_sensor_dev_attr(attr);
struct thermal_data *data = dev_get_drvdata(dev);
struct i2c_client *client = data->client;
int retval;
int hyst;
unsigned long val;
if (kstrtoul(buf, 10, &val))
return -EINVAL;
mutex_lock(&data->mutex);
retval = i2c_smbus_read_byte_data(client, sda->index);
if (retval < 0)
goto fail;
hyst = retval * 1000 - val;
hyst = DIV_ROUND_CLOSEST(hyst, 1000);
if (hyst < 0 || hyst > 255) {
retval = -ERANGE;
goto fail;
}
retval = i2c_smbus_write_byte_data(client, 0x21, hyst);
if (retval == 0) {
retval = count;
data->cached_hyst = hyst;
data->hyst_valid = jiffies + HZ;
}
fail:
mutex_unlock(&data->mutex);
return retval;
}
/*
* Sensors. We pass the actual i2c register to the methods.
*/
static SENSOR_DEVICE_ATTR(temp1_min, S_IRUGO | S_IWUSR,
show_temp, store_temp, 0x06);
static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR,
show_temp, store_temp, 0x05);
static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO | S_IWUSR,
show_temp, store_temp, 0x20);
static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0x00);
static SENSOR_DEVICE_ATTR_2(temp1_min_alarm, S_IRUGO,
show_bit, NULL, 0x36, 0x01);
static SENSOR_DEVICE_ATTR_2(temp1_max_alarm, S_IRUGO,
show_bit, NULL, 0x35, 0x01);
static SENSOR_DEVICE_ATTR_2(temp1_crit_alarm, S_IRUGO,
show_bit, NULL, 0x37, 0x01);
static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IRUGO | S_IWUSR,
show_hyst, store_hyst, 0x20);
static SENSOR_DEVICE_ATTR(temp2_min, S_IRUGO | S_IWUSR,
show_temp, store_temp, 0x08);
static SENSOR_DEVICE_ATTR(temp2_max, S_IRUGO | S_IWUSR,
show_temp, store_temp, 0x07);
static SENSOR_DEVICE_ATTR(temp2_crit, S_IRUGO | S_IWUSR,
show_temp, store_temp, 0x19);
static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 0x01);
static SENSOR_DEVICE_ATTR_2(temp2_min_alarm, S_IRUGO,
show_bit, NULL, 0x36, 0x02);
static SENSOR_DEVICE_ATTR_2(temp2_max_alarm, S_IRUGO,
show_bit, NULL, 0x35, 0x02);
static SENSOR_DEVICE_ATTR_2(temp2_crit_alarm, S_IRUGO,
show_bit, NULL, 0x37, 0x02);
static SENSOR_DEVICE_ATTR(temp2_crit_hyst, S_IRUGO | S_IWUSR,
show_hyst, store_hyst, 0x19);
static SENSOR_DEVICE_ATTR(temp3_min, S_IRUGO | S_IWUSR,
show_temp, store_temp, 0x16);
static SENSOR_DEVICE_ATTR(temp3_max, S_IRUGO | S_IWUSR,
show_temp, store_temp, 0x15);
static SENSOR_DEVICE_ATTR(temp3_crit, S_IRUGO | S_IWUSR,
show_temp, store_temp, 0x1A);
static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 0x23);
static SENSOR_DEVICE_ATTR_2(temp3_min_alarm, S_IRUGO,
show_bit, NULL, 0x36, 0x04);
static SENSOR_DEVICE_ATTR_2(temp3_max_alarm, S_IRUGO,
show_bit, NULL, 0x35, 0x04);
static SENSOR_DEVICE_ATTR_2(temp3_crit_alarm, S_IRUGO,
show_bit, NULL, 0x37, 0x04);
static SENSOR_DEVICE_ATTR(temp3_crit_hyst, S_IRUGO | S_IWUSR,
show_hyst, store_hyst, 0x1A);
static SENSOR_DEVICE_ATTR(temp4_min, S_IRUGO | S_IWUSR,
show_temp, store_temp, 0x2D);
static SENSOR_DEVICE_ATTR(temp4_max, S_IRUGO | S_IWUSR,
show_temp, store_temp, 0x2C);
static SENSOR_DEVICE_ATTR(temp4_crit, S_IRUGO | S_IWUSR,
show_temp, store_temp, 0x30);
static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_temp, NULL, 0x2A);
static SENSOR_DEVICE_ATTR_2(temp4_min_alarm, S_IRUGO,
show_bit, NULL, 0x36, 0x08);
static SENSOR_DEVICE_ATTR_2(temp4_max_alarm, S_IRUGO,
show_bit, NULL, 0x35, 0x08);
static SENSOR_DEVICE_ATTR_2(temp4_crit_alarm, S_IRUGO,
show_bit, NULL, 0x37, 0x08);
static SENSOR_DEVICE_ATTR(temp4_crit_hyst, S_IRUGO | S_IWUSR,
show_hyst, store_hyst, 0x30);
static SENSOR_DEVICE_ATTR_2(power_state, S_IRUGO | S_IWUSR,
show_bit, store_bit, 0x03, 0x40);
static struct attribute *emc1403_attrs[] = {
&sensor_dev_attr_temp1_min.dev_attr.attr,
&sensor_dev_attr_temp1_max.dev_attr.attr,
&sensor_dev_attr_temp1_crit.dev_attr.attr,
&sensor_dev_attr_temp1_input.dev_attr.attr,
&sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
&sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
&sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
&sensor_dev_attr_temp1_crit_hyst.dev_attr.attr,
&sensor_dev_attr_temp2_min.dev_attr.attr,
&sensor_dev_attr_temp2_max.dev_attr.attr,
&sensor_dev_attr_temp2_crit.dev_attr.attr,
&sensor_dev_attr_temp2_input.dev_attr.attr,
&sensor_dev_attr_temp2_min_alarm.dev_attr.attr,
&sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
&sensor_dev_attr_temp2_crit_alarm.dev_attr.attr,
&sensor_dev_attr_temp2_crit_hyst.dev_attr.attr,
&sensor_dev_attr_temp3_min.dev_attr.attr,
&sensor_dev_attr_temp3_max.dev_attr.attr,
&sensor_dev_attr_temp3_crit.dev_attr.attr,
&sensor_dev_attr_temp3_input.dev_attr.attr,
&sensor_dev_attr_temp3_min_alarm.dev_attr.attr,
&sensor_dev_attr_temp3_max_alarm.dev_attr.attr,
&sensor_dev_attr_temp3_crit_alarm.dev_attr.attr,
&sensor_dev_attr_temp3_crit_hyst.dev_attr.attr,
&sensor_dev_attr_power_state.dev_attr.attr,
NULL
};
static const struct attribute_group emc1403_group = {
.attrs = emc1403_attrs,
};
static struct attribute *emc1404_attrs[] = {
&sensor_dev_attr_temp4_min.dev_attr.attr,
&sensor_dev_attr_temp4_max.dev_attr.attr,
&sensor_dev_attr_temp4_crit.dev_attr.attr,
&sensor_dev_attr_temp4_input.dev_attr.attr,
&sensor_dev_attr_temp4_min_alarm.dev_attr.attr,
&sensor_dev_attr_temp4_max_alarm.dev_attr.attr,
&sensor_dev_attr_temp4_crit_alarm.dev_attr.attr,
&sensor_dev_attr_temp4_crit_hyst.dev_attr.attr,
NULL
};
static const struct attribute_group emc1404_group = {
.attrs = emc1404_attrs,
};
static int emc1403_detect(struct i2c_client *client,
struct i2c_board_info *info)
{
int id;
/* Check if thermal chip is SMSC and EMC1403 or EMC1423 */
id = i2c_smbus_read_byte_data(client, THERMAL_SMSC_ID_REG);
if (id != 0x5d)
return -ENODEV;
id = i2c_smbus_read_byte_data(client, THERMAL_PID_REG);
switch (id) {
case 0x21:
strlcpy(info->type, "emc1403", I2C_NAME_SIZE);
break;
case 0x23:
strlcpy(info->type, "emc1423", I2C_NAME_SIZE);
break;
case 0x25:
strlcpy(info->type, "emc1404", I2C_NAME_SIZE);
break;
case 0x27:
strlcpy(info->type, "emc1424", I2C_NAME_SIZE);
break;
default:
return -ENODEV;
}
id = i2c_smbus_read_byte_data(client, THERMAL_REVISION_REG);
if (id < 0x01 || id > 0x04)
return -ENODEV;
return 0;
}
static int emc1403_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct thermal_data *data;
struct device *hwmon_dev;
data = devm_kzalloc(&client->dev, sizeof(struct thermal_data),
GFP_KERNEL);
if (data == NULL)
return -ENOMEM;
data->client = client;
mutex_init(&data->mutex);
data->hyst_valid = jiffies - 1; /* Expired */
data->groups[0] = &emc1403_group;
if (id->driver_data)
data->groups[1] = &emc1404_group;
hwmon_dev = devm_hwmon_device_register_with_groups(&client->dev,
client->name, data,
data->groups);
if (IS_ERR(hwmon_dev))
return PTR_ERR(hwmon_dev);
dev_info(&client->dev, "%s Thermal chip found\n", id->name);
return 0;
}
static const unsigned short emc1403_address_list[] = {
0x18, 0x29, 0x4c, 0x4d, I2C_CLIENT_END
};
static const struct i2c_device_id emc1403_idtable[] = {
{ "emc1403", 0 },
{ "emc1404", 1 },
{ "emc1423", 0 },
{ "emc1424", 1 },
{ }
};
MODULE_DEVICE_TABLE(i2c, emc1403_idtable);
static struct i2c_driver sensor_emc1403 = {
.class = I2C_CLASS_HWMON,
.driver = {
.name = "emc1403",
},
.detect = emc1403_detect,
.probe = emc1403_probe,
.id_table = emc1403_idtable,
.address_list = emc1403_address_list,
};
module_i2c_driver(sensor_emc1403);
MODULE_AUTHOR("Kalhan Trisal <kalhan.trisal@intel.com");
MODULE_DESCRIPTION("emc1403 Thermal Driver");
MODULE_LICENSE("GPL v2");