linux_dsm_epyc7002/drivers/iio/pressure/st_pressure_i2c.c
Linus Walleij 2d7768a872 iio: st_sensors: add devicetree probing support
The I2C devices that make up the STMicroelectronics MEMS sensors
may be sneakily enabled by cleverly giving the device node the same
name as a string match from the platform device ID table. However
the right method is to use the compatible string.

On detection, the ST sensors use the ID string to probe and
instatiate the right sensor driver, so pass the kernel-internal ID
string in the .data field of the OF match table, and set the I2C
client name to this name when a compatible match is used.

This avoids having misc Linux-specific strings floating around in
the device tree.

Cc: Lee Jones <lee.jones@linaro.org>
Cc: Denis CIOCCA <denis.ciocca@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-11 21:09:49 +01:00

96 lines
2.1 KiB
C

/*
* STMicroelectronics pressures driver
*
* Copyright 2013 STMicroelectronics Inc.
*
* Denis Ciocca <denis.ciocca@st.com>
*
* Licensed under the GPL-2.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/iio/iio.h>
#include <linux/iio/common/st_sensors.h>
#include <linux/iio/common/st_sensors_i2c.h>
#include "st_pressure.h"
#ifdef CONFIG_OF
static const struct of_device_id st_press_of_match[] = {
{
.compatible = "st,lps001wp-press",
.data = LPS001WP_PRESS_DEV_NAME,
},
{
.compatible = "st,lps25h-press",
.data = LPS25H_PRESS_DEV_NAME,
},
{
.compatible = "st,lps331ap-press",
.data = LPS331AP_PRESS_DEV_NAME,
},
{},
};
MODULE_DEVICE_TABLE(of, st_press_of_match);
#else
#define st_press_of_match NULL
#endif
static int st_press_i2c_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct iio_dev *indio_dev;
struct st_sensor_data *pdata;
int err;
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*pdata));
if (!indio_dev)
return -ENOMEM;
pdata = iio_priv(indio_dev);
pdata->dev = &client->dev;
st_sensors_of_i2c_probe(client, st_press_of_match);
st_sensors_i2c_configure(indio_dev, client, pdata);
err = st_press_common_probe(indio_dev, client->dev.platform_data);
if (err < 0)
return err;
return 0;
}
static int st_press_i2c_remove(struct i2c_client *client)
{
st_press_common_remove(i2c_get_clientdata(client));
return 0;
}
static const struct i2c_device_id st_press_id_table[] = {
{ LPS001WP_PRESS_DEV_NAME },
{ LPS25H_PRESS_DEV_NAME },
{ LPS331AP_PRESS_DEV_NAME },
{},
};
MODULE_DEVICE_TABLE(i2c, st_press_id_table);
static struct i2c_driver st_press_driver = {
.driver = {
.owner = THIS_MODULE,
.name = "st-press-i2c",
.of_match_table = of_match_ptr(st_press_of_match),
},
.probe = st_press_i2c_probe,
.remove = st_press_i2c_remove,
.id_table = st_press_id_table,
};
module_i2c_driver(st_press_driver);
MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
MODULE_DESCRIPTION("STMicroelectronics pressures i2c driver");
MODULE_LICENSE("GPL v2");