linux_dsm_epyc7002/drivers/mtd
Aneesh Kumar K.V 3e35730dd7 mtd: powernv_flash: Fix device registration error
This change helps me to get multiple mtd device registered. Without this
I get

sysfs: cannot create duplicate filename '/bus/nvmem/devices/flash0'
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.0.0-rc2-00557-g1ef20ef21f22 #13
Call Trace:
[c0000000b38e3220] [c000000000b58fe4] dump_stack+0xe8/0x164 (unreliable)
[c0000000b38e3270] [c0000000004cf074] sysfs_warn_dup+0x84/0xb0
[c0000000b38e32f0] [c0000000004cf6c4] sysfs_do_create_link_sd.isra.0+0x114/0x150
[c0000000b38e3340] [c000000000726a84] bus_add_device+0x94/0x1e0
[c0000000b38e33c0] [c0000000007218f0] device_add+0x4d0/0x830
[c0000000b38e3480] [c0000000009d54a8] nvmem_register.part.2+0x1c8/0xb30
[c0000000b38e3560] [c000000000834530] mtd_nvmem_add+0x90/0x120
[c0000000b38e3650] [c000000000835bc8] add_mtd_device+0x198/0x4e0
[c0000000b38e36f0] [c00000000083619c] mtd_device_parse_register+0x11c/0x280
[c0000000b38e3780] [c000000000840830] powernv_flash_probe+0x180/0x250
[c0000000b38e3820] [c00000000072c120] platform_drv_probe+0x60/0xf0
[c0000000b38e38a0] [c0000000007283c8] really_probe+0x138/0x4d0
[c0000000b38e3930] [c000000000728acc] driver_probe_device+0x13c/0x1b0
[c0000000b38e39b0] [c000000000728c7c] __driver_attach+0x13c/0x1c0
[c0000000b38e3a30] [c000000000725130] bus_for_each_dev+0xa0/0x120
[c0000000b38e3a90] [c000000000727b2c] driver_attach+0x2c/0x40
[c0000000b38e3ab0] [c0000000007270f8] bus_add_driver+0x228/0x360
[c0000000b38e3b40] [c00000000072a2e0] driver_register+0x90/0x1a0
[c0000000b38e3bb0] [c00000000072c020] __platform_driver_register+0x50/0x70
[c0000000b38e3bd0] [c00000000105c984] powernv_flash_driver_init+0x24/0x38
[c0000000b38e3bf0] [c000000000010904] do_one_initcall+0x84/0x464
[c0000000b38e3cd0] [c000000001004548] kernel_init_freeable+0x530/0x634
[c0000000b38e3db0] [c000000000011154] kernel_init+0x1c/0x168
[c0000000b38e3e20] [c00000000000bed4] ret_from_kernel_thread+0x5c/0x68
mtd mtd1: Failed to register NVMEM device

With the change we now have

root@(none):/sys/bus/nvmem/devices# ls -al
total 0
drwxr-xr-x 2 root root 0 Feb  6 20:49 .
drwxr-xr-x 4 root root 0 Feb  6 20:49 ..
lrwxrwxrwx 1 root root 0 Feb  6 20:49 flash@0 -> ../../../devices/platform/ibm,opal:flash@0/mtd/mtd0/flash@0
lrwxrwxrwx 1 root root 0 Feb  6 20:49 flash@1 -> ../../../devices/platform/ibm,opal:flash@1/mtd/mtd1/flash@1

Fixes: 1cbb4a1c43 ("mtd: powernv: Add powernv flash MTD abstraction driver")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
2019-02-13 14:19:40 +01:00
..
chips mtd: cfi_cmdset_0020: Mark expected switch fall-throughs 2018-11-09 20:40:11 +01:00
devices mtd: powernv_flash: Fix device registration error 2019-02-13 14:19:40 +01:00
lpddr
maps Kbuild updates for v4.21 2018-12-29 12:03:17 -08:00
nand mtd: rawnand: gpmi: fix MX28 bus master lockup problem 2019-02-06 09:39:22 +01:00
parsers mtd: partitions: Add OF support to RedBoot partitions 2018-11-12 11:51:02 +01:00
spi-nor spi: Updates for v4.21 2018-12-25 14:43:54 -08:00
tests mtd: rawnand: Allow selection of ECC byte ordering at runtime 2018-10-03 11:12:25 +02:00
ubi ubi: Do not drop UBI device reference before using 2018-12-13 22:09:44 +01:00
afs.c
ar7part.c mm: remove include/linux/bootmem.h 2018-10-31 08:54:16 -07:00
bcm47xxpart.c
bcm63xxpart.c
cmdlinepart.c
ftl.c
inftlcore.c
inftlmount.c
Kconfig Char/Misc driver patches for 4.21-rc1 2018-12-28 20:54:57 -08:00
Makefile mtd: Move Redboot partition parser 2018-11-12 11:44:13 +01:00
mtd_blkdevs.c mtd_blkdevs: convert to blk-mq 2018-10-16 08:09:58 -06:00
mtdblock_ro.c
mtdblock.c mtd: change len type from signed to unsigned type 2018-12-03 11:32:26 +01:00
mtdchar.c
mtdconcat.c
mtdcore.c mtd: Use mtd->name when registering nvmem device 2019-02-13 14:10:22 +01:00
mtdcore.h mtd: Check add_mtd_device() ret code 2019-01-07 14:06:24 +01:00
mtdoops.c
mtdpart.c mtd: Make sure mtd->erasesize is valid even if the partition is of size 0 2019-02-06 00:02:51 +01:00
mtdsuper.c
mtdswap.c mtd: use DEFINE_SHOW_ATTRIBUTE() instead of open-coding it 2018-12-03 11:32:26 +01:00
nftlcore.c
nftlmount.c mtd: nftl: clean up indentation, remove extraneous tabs 2018-12-02 09:20:36 +01:00
ofpart.c
rfd_ftl.c
sm_ftl.c mtd: rawnand: Allow selection of ECC byte ordering at runtime 2018-10-03 11:12:25 +02:00
sm_ftl.h
ssfdc.c