Linus Torvalds 118c9a45fd arm-soc: bug fixes for 3.9-rc5 ... After a quiet set of fixes for 3.9-rc4, a lot of people woke up and sent urgent fixes for 3.9. I pushed back on a number of them that got deferred to 3.10, but these are the ones that seemed important. Regression in 3.9: - Multiple regressions in OMAP2+ clock cleanup - SH-Mobile frame buffer bug fix that merged here because of maintainer MIA - ux500 prcmu changes broke DT booting - MMCI duplicated regulator setup on ux500 - New ux500 clock driver broke ethernet on snowball - Local interrupt driver for mvebu broke ethernet - MVEBU GPIO driver did not get set up right on Orion DT - incorrect interrupt number on Orion crypto for DT Long-standing bugs, including candidates for stable: - Kirkwood MMC needs to disable invalid card detect pins - MV SDIO pinmux was wrong on Mirabox - GoFlex Net board file needs to set NAND chip delay - MSM timer restart race - ep93xx early debug code broke in 3.7 - i.MX CPU hotplug race - Incorrect clock setup for OMAP1 USB - Workaround for bad clock setup by some old OMAP4 boot loaders - Static I/O mappings on cns3xxx since 3.2 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iQIVAwUAUVrxWGCrR//JCVInAQLsoQ/+IQKk3v3xOhsvLaPxYjpO1dZqwxmWHwCz ujmpnsUabYwuVfVL982k3RTSry5brgOB75CdztOyYsnckF1ZJ3zPjBN+TQM7G/aF 1lpfUTdCEQFgWFb69G6Lr5ZIDk7co3nRJk1GFS/xi/EAlnmUY/tC1Epco2Y0z0g4 dWz34sor22lxwWkUTdgXKwynoxmmjBzZIJOhtSOeednVPxN2qUe9IDAy9qk43U3a Xg8j4OQT59TTmAZgAB7DLlJ3BGpFvTFAeZ4sDwrCCnibmB5E9LiaYwS9vrk9SQB1 D8CYIUqcP+cGKnftCCIzgjXHYvJw8fa7NKBUw9CzusIuk+c5AbE28KZRIL4D24Oq ImlFV4Neec3Iab6IWfD0+PQK6PkwqnvPd5IBSFO4zUv2adafl7sTASlMnNPZtWbo gV+GNVlCyab3l1KYBPo+CQGup3UpIAs5trQoCUh7BRf4HEsL+HILr/SFRQk3GQ6H B+3HgSleiipT8n81VDFiWY1o5KuXmjUd2qpbc0a45VtM6EFBONwqBaKew93NkDYa oIhI6yS8aIMYPXC6ZP5R2OvKUuL+mypKKXlt9BMCnDG9mrGMks8BLumcHco+Jmkt 9p6DChibxsaH6QArAi16shFPm0VqFUI6cidgTUcY024bZSiXpBMF52mIu6SEf0/S agIwGxpuXFg= =oQbL -----END PGP SIGNATURE----- Merge tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC bug fixes from Arnd Bergmann: "After a quiet set of fixes for 3.9-rc4, a lot of people woke up and sent urgent fixes for 3.9. I pushed back on a number of them that got deferred to 3.10, but these are the ones that seemed important. Regression in 3.9: - Multiple regressions in OMAP2+ clock cleanup - SH-Mobile frame buffer bug fix that merged here because of maintainer MIA - ux500 prcmu changes broke DT booting - MMCI duplicated regulator setup on ux500 - New ux500 clock driver broke ethernet on snowball - Local interrupt driver for mvebu broke ethernet - MVEBU GPIO driver did not get set up right on Orion DT - incorrect interrupt number on Orion crypto for DT Long-standing bugs, including candidates for stable: - Kirkwood MMC needs to disable invalid card detect pins - MV SDIO pinmux was wrong on Mirabox - GoFlex Net board file needs to set NAND chip delay - MSM timer restart race - ep93xx early debug code broke in 3.7 - i.MX CPU hotplug race - Incorrect clock setup for OMAP1 USB - Workaround for bad clock setup by some old OMAP4 boot loaders - Static I/O mappings on cns3xxx since 3.2" * tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: cns3xxx: fix mapping of private memory region arm: mvebu: Fix pinctrl for Armada 370 Mirabox SDIO port. arm: orion5x: correct IRQ used in dtsi for mv_cesa arm: orion5x: fix orion5x.dtsi gpio parameters ARM: Kirkwood: fix unused mvsdio gpio pins arm: mvebu: Use local interrupt only for the timer 0 ARM: kirkwood: Fix chip-delay for GoFlex Net ARM: ux500: Enable the clock controlling Ethernet on Snowball ARM: ux500: Stop passing ios_handler() as an MMCI power controlling call-back ARM: ux500: Apply the TCPM and TCDM locations and sizes to dbx5x0 DT fbdev: sh_mobile_lcdc: fixup B side hsync adjust settings ARM: OMAP: clocks: Delay clk inits atleast until slab is initialized ARM: imx: fix sync issue between imx_cpu_die and imx_cpu_kill ARM: msm: Stop counting before reprogramming clockevent ARM: ep93xx: Fix wait for UART FIFO to be empty ARM: OMAP4: PM: fix PM regression introduced by recent clock cleanup ARM: OMAP3: hwmod data: keep MIDLEMODE in force-standby for musb ARM: OMAP4: clock data: lock USB DPLL on boot ARM: OMAP1: fix USB host on 1710		2013-04-02 08:35:03 -07:00
..
bootp	ARM: 6499/1: Thumb-2: Correct data alignment for CONFIG_THUMB2_KERNEL in bootp/init.S	2010-11-30 13:44:24 +00:00
compressed	ARM: 7666/1: decompressor: add -mno-single-pic-base for building the decompressor	2013-03-06 23:45:42 +00:00
dts	arm-soc: bug fixes for 3.9-rc5	2013-04-02 08:35:03 -07:00
.gitignore	ARM: devicetree: Add .dtb files to arch/arm/boot/.gitignore	2012-01-30 11:47:37 -07:00
install.sh	kbuild: use INSTALLKERNEL to select customized installkernel script	2009-09-20 12:18:14 +02:00
Makefile	ARM: dts: remove generated .dtb files on clean	2013-03-04 17:15:35 -08:00