AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-28 11:18:45 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
d72b080171
linux_dsm_epyc7002/arch/arm/mach-lpc32xx/phy3250.c
Mark Brown d7cabeed83 dmaengine: PL08x: Avoid collisions with get_signal() macro 
As pointed out by Arnd Bergmann there is a get_signal macro definied in
linux/signal.h which can conflict with the platform data callback
function of the same name leading to confusing errors from the compiler
(especially if signal.h manages to get pulled into the driver itself due
to header dependencies).  Avoid such errors by renaming get_signal and
put_signal in the platform data to get_xfer_signal and put_xfer_signal.

Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05 11:40:47 +05:30

271 lines
7.1 KiB
C
Raw Blame History

/*
* Platform support for LPC32xx SoC
*
* Author: Kevin Wells <kevin.wells@nxp.com>
*
* Copyright (C) 2012 Roland Stigge <stigge@antcom.de>
* Copyright (C) 2010 NXP Semiconductors
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/device.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/dma-mapping.h>
#include <linux/device.h>
#include <linux/gpio.h>
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
#include <linux/amba/pl08x.h>
#include <linux/amba/mmci.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/clk.h>
#include <linux/mtd/lpc32xx_slc.h>
#include <linux/mtd/lpc32xx_mlc.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/hardware.h>
#include <mach/platform.h>
#include <mach/board.h>
#include <mach/gpio-lpc32xx.h>
#include "common.h"
/*
* Mapped GPIOLIB GPIOs
*/
#define LCD_POWER_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 0)
#define BKL_POWER_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 4)
#define MMC_PWR_ENABLE_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 5)
/*
* AMBA LCD controller
*/
static struct clcd_panel conn_lcd_panel = {
.mode = {
.name = "QVGA portrait",
.refresh = 60,
.xres = 240,
.yres = 320,
.pixclock = 191828,
.left_margin = 22,
.right_margin = 11,
.upper_margin = 2,
.lower_margin = 1,
.hsync_len = 5,
.vsync_len = 2,
.sync = 0,
.vmode = FB_VMODE_NONINTERLACED,
},
.width = -1,
.height = -1,
.tim2 = (TIM2_IVS | TIM2_IHS),
.cntl = (CNTL_BGR | CNTL_LCDTFT | CNTL_LCDVCOMP(1) |
CNTL_LCDBPP16_565),
.bpp = 16,
};
#define PANEL_SIZE (3 * SZ_64K)
static int lpc32xx_clcd_setup(struct clcd_fb *fb)
{
dma_addr_t dma;
fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev,
PANEL_SIZE, &dma, GFP_KERNEL);
if (!fb->fb.screen_base) {
printk(KERN_ERR "CLCD: unable to map framebuffer\n");
return -ENOMEM;
}
fb->fb.fix.smem_start = dma;
fb->fb.fix.smem_len = PANEL_SIZE;
fb->panel = &conn_lcd_panel;
if (gpio_request(LCD_POWER_GPIO, "LCD power"))
printk(KERN_ERR "Error requesting gpio %u",
LCD_POWER_GPIO);
else if (gpio_direction_output(LCD_POWER_GPIO, 1))
printk(KERN_ERR "Error setting gpio %u to output",
LCD_POWER_GPIO);
if (gpio_request(BKL_POWER_GPIO, "LCD backlight power"))
printk(KERN_ERR "Error requesting gpio %u",
BKL_POWER_GPIO);
else if (gpio_direction_output(BKL_POWER_GPIO, 1))
printk(KERN_ERR "Error setting gpio %u to output",
BKL_POWER_GPIO);
return 0;
}
static int lpc32xx_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
{
return dma_mmap_writecombine(&fb->dev->dev, vma,
fb->fb.screen_base, fb->fb.fix.smem_start,
fb->fb.fix.smem_len);
}
static void lpc32xx_clcd_remove(struct clcd_fb *fb)
{
dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
fb->fb.screen_base, fb->fb.fix.smem_start);
}
/*
* On some early LCD modules (1307.0), the backlight logic is inverted.
* For those board variants, swap the disable and enable states for
* BKL_POWER_GPIO.
*/
static void clcd_disable(struct clcd_fb *fb)
{
gpio_set_value(BKL_POWER_GPIO, 0);
gpio_set_value(LCD_POWER_GPIO, 0);
}
static void clcd_enable(struct clcd_fb *fb)
{
gpio_set_value(BKL_POWER_GPIO, 1);
gpio_set_value(LCD_POWER_GPIO, 1);
}
static struct clcd_board lpc32xx_clcd_data = {
.name = "Phytec LCD",
.check = clcdfb_check,
.decode = clcdfb_decode,
.disable = clcd_disable,
.enable = clcd_enable,
.setup = lpc32xx_clcd_setup,
.mmap = lpc32xx_clcd_mmap,
.remove = lpc32xx_clcd_remove,
};
static struct pl08x_channel_data pl08x_slave_channels[] = {
{
.bus_id = "nand-slc",
.min_signal = 1, /* SLC NAND Flash */
.max_signal = 1,
.periph_buses = PL08X_AHB1,
},
{
.bus_id = "nand-mlc",
.min_signal = 12, /* MLC NAND Flash */
.max_signal = 12,
.periph_buses = PL08X_AHB1,
},
};
static int pl08x_get_signal(const struct pl08x_channel_data *cd)
{
return cd->min_signal;
}
static void pl08x_put_signal(const struct pl08x_channel_data *cd, int ch)
{
}
static struct pl08x_platform_data pl08x_pd = {
.slave_channels = &pl08x_slave_channels[0],
.num_slave_channels = ARRAY_SIZE(pl08x_slave_channels),
.get_xfer_signal = pl08x_get_signal,
.put_xfer_signal = pl08x_put_signal,
.lli_buses = PL08X_AHB1,
.mem_buses = PL08X_AHB1,
};
static int mmc_handle_ios(struct device *dev, struct mmc_ios *ios)
{
/* Only on and off are supported */
if (ios->power_mode == MMC_POWER_OFF)
gpio_set_value(MMC_PWR_ENABLE_GPIO, 0);
else
gpio_set_value(MMC_PWR_ENABLE_GPIO, 1);
return 0;
}
static struct mmci_platform_data lpc32xx_mmci_data = {
.ocr_mask = MMC_VDD_30_31 | MMC_VDD_31_32 |
MMC_VDD_32_33 | MMC_VDD_33_34,
.ios_handler = mmc_handle_ios,
.dma_filter = NULL,
/* No DMA for now since AMBA PL080 dmaengine driver only does scatter
* gather, and the MMCI driver doesn't do it this way */
};
static struct lpc32xx_slc_platform_data lpc32xx_slc_data = {
.dma_filter = pl08x_filter_id,
};
static struct lpc32xx_mlc_platform_data lpc32xx_mlc_data = {
.dma_filter = pl08x_filter_id,
};
static const struct of_dev_auxdata lpc32xx_auxdata_lookup[] __initconst = {
OF_DEV_AUXDATA("arm,pl022", 0x20084000, "dev:ssp0", NULL),
OF_DEV_AUXDATA("arm,pl022", 0x2008C000, "dev:ssp1", NULL),
OF_DEV_AUXDATA("arm,pl110", 0x31040000, "dev:clcd", &lpc32xx_clcd_data),
OF_DEV_AUXDATA("arm,pl080", 0x31000000, "pl08xdmac", &pl08x_pd),
OF_DEV_AUXDATA("arm,pl18x", 0x20098000, "20098000.sd",
&lpc32xx_mmci_data),
OF_DEV_AUXDATA("nxp,lpc3220-slc", 0x20020000, "20020000.flash",
&lpc32xx_slc_data),
OF_DEV_AUXDATA("nxp,lpc3220-mlc", 0x200a8000, "200a8000.flash",
&lpc32xx_mlc_data),
{ }
};
static void __init lpc3250_machine_init(void)
{
u32 tmp;
/* Setup LCD muxing to RGB565 */
tmp = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL) &
~(LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_MSK |
LPC32XX_CLKPWR_LCDCTRL_PSCALE_MSK);
tmp |= LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_TFT16;
__raw_writel(tmp, LPC32XX_CLKPWR_LCDCLK_CTRL);
lpc32xx_serial_init();
/* Test clock needed for UDA1380 initial init */
__raw_writel(LPC32XX_CLKPWR_TESTCLK2_SEL_MOSC |
LPC32XX_CLKPWR_TESTCLK_TESTCLK2_EN,
LPC32XX_CLKPWR_TEST_CLK_SEL);
of_platform_populate(NULL, of_default_bus_match_table,
lpc32xx_auxdata_lookup, NULL);
}
static char const *lpc32xx_dt_compat[] __initdata = {
"nxp,lpc3220",
"nxp,lpc3230",
"nxp,lpc3240",
"nxp,lpc3250",
NULL
};
DT_MACHINE_START(LPC32XX_DT, "LPC32XX SoC (Flattened Device Tree)")
.atag_offset = 0x100,
.map_io = lpc32xx_map_io,
.init_irq = lpc32xx_init_irq,
.init_time = lpc32xx_timer_init,
.init_machine = lpc3250_machine_init,
.dt_compat = lpc32xx_dt_compat,
.restart = lpc23xx_restart,
MACHINE_END
Reference in New Issue View Git Blame Copy Permalink