mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-05 07:06:59 +07:00
3c8ac0f2ad
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: linux-can@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1185 lines
30 KiB
C
1185 lines
30 KiB
C
/*
|
|
* flexcan.c - FLEXCAN CAN controller driver
|
|
*
|
|
* Copyright (c) 2005-2006 Varma Electronics Oy
|
|
* Copyright (c) 2009 Sascha Hauer, Pengutronix
|
|
* Copyright (c) 2010 Marc Kleine-Budde, Pengutronix
|
|
*
|
|
* Based on code originally by Andrey Volkov <avolkov@varma-el.com>
|
|
*
|
|
* LICENCE:
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation version 2.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
*/
|
|
|
|
#include <linux/netdevice.h>
|
|
#include <linux/can.h>
|
|
#include <linux/can/dev.h>
|
|
#include <linux/can/error.h>
|
|
#include <linux/can/platform/flexcan.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/if_arp.h>
|
|
#include <linux/if_ether.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/list.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pinctrl/consumer.h>
|
|
|
|
#define DRV_NAME "flexcan"
|
|
|
|
/* 8 for RX fifo and 2 error handling */
|
|
#define FLEXCAN_NAPI_WEIGHT (8 + 2)
|
|
|
|
/* FLEXCAN module configuration register (CANMCR) bits */
|
|
#define FLEXCAN_MCR_MDIS BIT(31)
|
|
#define FLEXCAN_MCR_FRZ BIT(30)
|
|
#define FLEXCAN_MCR_FEN BIT(29)
|
|
#define FLEXCAN_MCR_HALT BIT(28)
|
|
#define FLEXCAN_MCR_NOT_RDY BIT(27)
|
|
#define FLEXCAN_MCR_WAK_MSK BIT(26)
|
|
#define FLEXCAN_MCR_SOFTRST BIT(25)
|
|
#define FLEXCAN_MCR_FRZ_ACK BIT(24)
|
|
#define FLEXCAN_MCR_SUPV BIT(23)
|
|
#define FLEXCAN_MCR_SLF_WAK BIT(22)
|
|
#define FLEXCAN_MCR_WRN_EN BIT(21)
|
|
#define FLEXCAN_MCR_LPM_ACK BIT(20)
|
|
#define FLEXCAN_MCR_WAK_SRC BIT(19)
|
|
#define FLEXCAN_MCR_DOZE BIT(18)
|
|
#define FLEXCAN_MCR_SRX_DIS BIT(17)
|
|
#define FLEXCAN_MCR_BCC BIT(16)
|
|
#define FLEXCAN_MCR_LPRIO_EN BIT(13)
|
|
#define FLEXCAN_MCR_AEN BIT(12)
|
|
#define FLEXCAN_MCR_MAXMB(x) ((x) & 0xf)
|
|
#define FLEXCAN_MCR_IDAM_A (0 << 8)
|
|
#define FLEXCAN_MCR_IDAM_B (1 << 8)
|
|
#define FLEXCAN_MCR_IDAM_C (2 << 8)
|
|
#define FLEXCAN_MCR_IDAM_D (3 << 8)
|
|
|
|
/* FLEXCAN control register (CANCTRL) bits */
|
|
#define FLEXCAN_CTRL_PRESDIV(x) (((x) & 0xff) << 24)
|
|
#define FLEXCAN_CTRL_RJW(x) (((x) & 0x03) << 22)
|
|
#define FLEXCAN_CTRL_PSEG1(x) (((x) & 0x07) << 19)
|
|
#define FLEXCAN_CTRL_PSEG2(x) (((x) & 0x07) << 16)
|
|
#define FLEXCAN_CTRL_BOFF_MSK BIT(15)
|
|
#define FLEXCAN_CTRL_ERR_MSK BIT(14)
|
|
#define FLEXCAN_CTRL_CLK_SRC BIT(13)
|
|
#define FLEXCAN_CTRL_LPB BIT(12)
|
|
#define FLEXCAN_CTRL_TWRN_MSK BIT(11)
|
|
#define FLEXCAN_CTRL_RWRN_MSK BIT(10)
|
|
#define FLEXCAN_CTRL_SMP BIT(7)
|
|
#define FLEXCAN_CTRL_BOFF_REC BIT(6)
|
|
#define FLEXCAN_CTRL_TSYN BIT(5)
|
|
#define FLEXCAN_CTRL_LBUF BIT(4)
|
|
#define FLEXCAN_CTRL_LOM BIT(3)
|
|
#define FLEXCAN_CTRL_PROPSEG(x) ((x) & 0x07)
|
|
#define FLEXCAN_CTRL_ERR_BUS (FLEXCAN_CTRL_ERR_MSK)
|
|
#define FLEXCAN_CTRL_ERR_STATE \
|
|
(FLEXCAN_CTRL_TWRN_MSK | FLEXCAN_CTRL_RWRN_MSK | \
|
|
FLEXCAN_CTRL_BOFF_MSK)
|
|
#define FLEXCAN_CTRL_ERR_ALL \
|
|
(FLEXCAN_CTRL_ERR_BUS | FLEXCAN_CTRL_ERR_STATE)
|
|
|
|
/* FLEXCAN error and status register (ESR) bits */
|
|
#define FLEXCAN_ESR_TWRN_INT BIT(17)
|
|
#define FLEXCAN_ESR_RWRN_INT BIT(16)
|
|
#define FLEXCAN_ESR_BIT1_ERR BIT(15)
|
|
#define FLEXCAN_ESR_BIT0_ERR BIT(14)
|
|
#define FLEXCAN_ESR_ACK_ERR BIT(13)
|
|
#define FLEXCAN_ESR_CRC_ERR BIT(12)
|
|
#define FLEXCAN_ESR_FRM_ERR BIT(11)
|
|
#define FLEXCAN_ESR_STF_ERR BIT(10)
|
|
#define FLEXCAN_ESR_TX_WRN BIT(9)
|
|
#define FLEXCAN_ESR_RX_WRN BIT(8)
|
|
#define FLEXCAN_ESR_IDLE BIT(7)
|
|
#define FLEXCAN_ESR_TXRX BIT(6)
|
|
#define FLEXCAN_EST_FLT_CONF_SHIFT (4)
|
|
#define FLEXCAN_ESR_FLT_CONF_MASK (0x3 << FLEXCAN_EST_FLT_CONF_SHIFT)
|
|
#define FLEXCAN_ESR_FLT_CONF_ACTIVE (0x0 << FLEXCAN_EST_FLT_CONF_SHIFT)
|
|
#define FLEXCAN_ESR_FLT_CONF_PASSIVE (0x1 << FLEXCAN_EST_FLT_CONF_SHIFT)
|
|
#define FLEXCAN_ESR_BOFF_INT BIT(2)
|
|
#define FLEXCAN_ESR_ERR_INT BIT(1)
|
|
#define FLEXCAN_ESR_WAK_INT BIT(0)
|
|
#define FLEXCAN_ESR_ERR_BUS \
|
|
(FLEXCAN_ESR_BIT1_ERR | FLEXCAN_ESR_BIT0_ERR | \
|
|
FLEXCAN_ESR_ACK_ERR | FLEXCAN_ESR_CRC_ERR | \
|
|
FLEXCAN_ESR_FRM_ERR | FLEXCAN_ESR_STF_ERR)
|
|
#define FLEXCAN_ESR_ERR_STATE \
|
|
(FLEXCAN_ESR_TWRN_INT | FLEXCAN_ESR_RWRN_INT | FLEXCAN_ESR_BOFF_INT)
|
|
#define FLEXCAN_ESR_ERR_ALL \
|
|
(FLEXCAN_ESR_ERR_BUS | FLEXCAN_ESR_ERR_STATE)
|
|
#define FLEXCAN_ESR_ALL_INT \
|
|
(FLEXCAN_ESR_TWRN_INT | FLEXCAN_ESR_RWRN_INT | \
|
|
FLEXCAN_ESR_BOFF_INT | FLEXCAN_ESR_ERR_INT)
|
|
|
|
/* FLEXCAN interrupt flag register (IFLAG) bits */
|
|
#define FLEXCAN_TX_BUF_ID 8
|
|
#define FLEXCAN_IFLAG_BUF(x) BIT(x)
|
|
#define FLEXCAN_IFLAG_RX_FIFO_OVERFLOW BIT(7)
|
|
#define FLEXCAN_IFLAG_RX_FIFO_WARN BIT(6)
|
|
#define FLEXCAN_IFLAG_RX_FIFO_AVAILABLE BIT(5)
|
|
#define FLEXCAN_IFLAG_DEFAULT \
|
|
(FLEXCAN_IFLAG_RX_FIFO_OVERFLOW | FLEXCAN_IFLAG_RX_FIFO_AVAILABLE | \
|
|
FLEXCAN_IFLAG_BUF(FLEXCAN_TX_BUF_ID))
|
|
|
|
/* FLEXCAN message buffers */
|
|
#define FLEXCAN_MB_CNT_CODE(x) (((x) & 0xf) << 24)
|
|
#define FLEXCAN_MB_CNT_SRR BIT(22)
|
|
#define FLEXCAN_MB_CNT_IDE BIT(21)
|
|
#define FLEXCAN_MB_CNT_RTR BIT(20)
|
|
#define FLEXCAN_MB_CNT_LENGTH(x) (((x) & 0xf) << 16)
|
|
#define FLEXCAN_MB_CNT_TIMESTAMP(x) ((x) & 0xffff)
|
|
|
|
#define FLEXCAN_MB_CODE_MASK (0xf0ffffff)
|
|
|
|
/*
|
|
* FLEXCAN hardware feature flags
|
|
*
|
|
* Below is some version info we got:
|
|
* SOC Version IP-Version Glitch- [TR]WRN_INT
|
|
* Filter? connected?
|
|
* MX25 FlexCAN2 03.00.00.00 no no
|
|
* MX28 FlexCAN2 03.00.04.00 yes yes
|
|
* MX35 FlexCAN2 03.00.00.00 no no
|
|
* MX53 FlexCAN2 03.00.00.00 yes no
|
|
* MX6s FlexCAN3 10.00.12.00 yes yes
|
|
*
|
|
* Some SOCs do not have the RX_WARN & TX_WARN interrupt line connected.
|
|
*/
|
|
#define FLEXCAN_HAS_V10_FEATURES BIT(1) /* For core version >= 10 */
|
|
#define FLEXCAN_HAS_BROKEN_ERR_STATE BIT(2) /* [TR]WRN_INT not connected */
|
|
|
|
/* Structure of the message buffer */
|
|
struct flexcan_mb {
|
|
u32 can_ctrl;
|
|
u32 can_id;
|
|
u32 data[2];
|
|
};
|
|
|
|
/* Structure of the hardware registers */
|
|
struct flexcan_regs {
|
|
u32 mcr; /* 0x00 */
|
|
u32 ctrl; /* 0x04 */
|
|
u32 timer; /* 0x08 */
|
|
u32 _reserved1; /* 0x0c */
|
|
u32 rxgmask; /* 0x10 */
|
|
u32 rx14mask; /* 0x14 */
|
|
u32 rx15mask; /* 0x18 */
|
|
u32 ecr; /* 0x1c */
|
|
u32 esr; /* 0x20 */
|
|
u32 imask2; /* 0x24 */
|
|
u32 imask1; /* 0x28 */
|
|
u32 iflag2; /* 0x2c */
|
|
u32 iflag1; /* 0x30 */
|
|
u32 crl2; /* 0x34 */
|
|
u32 esr2; /* 0x38 */
|
|
u32 imeur; /* 0x3c */
|
|
u32 lrfr; /* 0x40 */
|
|
u32 crcr; /* 0x44 */
|
|
u32 rxfgmask; /* 0x48 */
|
|
u32 rxfir; /* 0x4c */
|
|
u32 _reserved3[12];
|
|
struct flexcan_mb cantxfg[64];
|
|
};
|
|
|
|
struct flexcan_devtype_data {
|
|
u32 features; /* hardware controller features */
|
|
};
|
|
|
|
struct flexcan_priv {
|
|
struct can_priv can;
|
|
struct net_device *dev;
|
|
struct napi_struct napi;
|
|
|
|
void __iomem *base;
|
|
u32 reg_esr;
|
|
u32 reg_ctrl_default;
|
|
|
|
struct clk *clk_ipg;
|
|
struct clk *clk_per;
|
|
struct flexcan_platform_data *pdata;
|
|
const struct flexcan_devtype_data *devtype_data;
|
|
};
|
|
|
|
static struct flexcan_devtype_data fsl_p1010_devtype_data = {
|
|
.features = FLEXCAN_HAS_BROKEN_ERR_STATE,
|
|
};
|
|
static struct flexcan_devtype_data fsl_imx28_devtype_data;
|
|
static struct flexcan_devtype_data fsl_imx6q_devtype_data = {
|
|
.features = FLEXCAN_HAS_V10_FEATURES,
|
|
};
|
|
|
|
static const struct can_bittiming_const flexcan_bittiming_const = {
|
|
.name = DRV_NAME,
|
|
.tseg1_min = 4,
|
|
.tseg1_max = 16,
|
|
.tseg2_min = 2,
|
|
.tseg2_max = 8,
|
|
.sjw_max = 4,
|
|
.brp_min = 1,
|
|
.brp_max = 256,
|
|
.brp_inc = 1,
|
|
};
|
|
|
|
/*
|
|
* Abstract off the read/write for arm versus ppc.
|
|
*/
|
|
#if defined(__BIG_ENDIAN)
|
|
static inline u32 flexcan_read(void __iomem *addr)
|
|
{
|
|
return in_be32(addr);
|
|
}
|
|
|
|
static inline void flexcan_write(u32 val, void __iomem *addr)
|
|
{
|
|
out_be32(addr, val);
|
|
}
|
|
#else
|
|
static inline u32 flexcan_read(void __iomem *addr)
|
|
{
|
|
return readl(addr);
|
|
}
|
|
|
|
static inline void flexcan_write(u32 val, void __iomem *addr)
|
|
{
|
|
writel(val, addr);
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Swtich transceiver on or off
|
|
*/
|
|
static void flexcan_transceiver_switch(const struct flexcan_priv *priv, int on)
|
|
{
|
|
if (priv->pdata && priv->pdata->transceiver_switch)
|
|
priv->pdata->transceiver_switch(on);
|
|
}
|
|
|
|
static inline int flexcan_has_and_handle_berr(const struct flexcan_priv *priv,
|
|
u32 reg_esr)
|
|
{
|
|
return (priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING) &&
|
|
(reg_esr & FLEXCAN_ESR_ERR_BUS);
|
|
}
|
|
|
|
static inline void flexcan_chip_enable(struct flexcan_priv *priv)
|
|
{
|
|
struct flexcan_regs __iomem *regs = priv->base;
|
|
u32 reg;
|
|
|
|
reg = flexcan_read(®s->mcr);
|
|
reg &= ~FLEXCAN_MCR_MDIS;
|
|
flexcan_write(reg, ®s->mcr);
|
|
|
|
udelay(10);
|
|
}
|
|
|
|
static inline void flexcan_chip_disable(struct flexcan_priv *priv)
|
|
{
|
|
struct flexcan_regs __iomem *regs = priv->base;
|
|
u32 reg;
|
|
|
|
reg = flexcan_read(®s->mcr);
|
|
reg |= FLEXCAN_MCR_MDIS;
|
|
flexcan_write(reg, ®s->mcr);
|
|
}
|
|
|
|
static int flexcan_get_berr_counter(const struct net_device *dev,
|
|
struct can_berr_counter *bec)
|
|
{
|
|
const struct flexcan_priv *priv = netdev_priv(dev);
|
|
struct flexcan_regs __iomem *regs = priv->base;
|
|
u32 reg = flexcan_read(®s->ecr);
|
|
|
|
bec->txerr = (reg >> 0) & 0xff;
|
|
bec->rxerr = (reg >> 8) & 0xff;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int flexcan_start_xmit(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
const struct flexcan_priv *priv = netdev_priv(dev);
|
|
struct flexcan_regs __iomem *regs = priv->base;
|
|
struct can_frame *cf = (struct can_frame *)skb->data;
|
|
u32 can_id;
|
|
u32 ctrl = FLEXCAN_MB_CNT_CODE(0xc) | (cf->can_dlc << 16);
|
|
|
|
if (can_dropped_invalid_skb(dev, skb))
|
|
return NETDEV_TX_OK;
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
if (cf->can_id & CAN_EFF_FLAG) {
|
|
can_id = cf->can_id & CAN_EFF_MASK;
|
|
ctrl |= FLEXCAN_MB_CNT_IDE | FLEXCAN_MB_CNT_SRR;
|
|
} else {
|
|
can_id = (cf->can_id & CAN_SFF_MASK) << 18;
|
|
}
|
|
|
|
if (cf->can_id & CAN_RTR_FLAG)
|
|
ctrl |= FLEXCAN_MB_CNT_RTR;
|
|
|
|
if (cf->can_dlc > 0) {
|
|
u32 data = be32_to_cpup((__be32 *)&cf->data[0]);
|
|
flexcan_write(data, ®s->cantxfg[FLEXCAN_TX_BUF_ID].data[0]);
|
|
}
|
|
if (cf->can_dlc > 3) {
|
|
u32 data = be32_to_cpup((__be32 *)&cf->data[4]);
|
|
flexcan_write(data, ®s->cantxfg[FLEXCAN_TX_BUF_ID].data[1]);
|
|
}
|
|
|
|
can_put_echo_skb(skb, dev, 0);
|
|
|
|
flexcan_write(can_id, ®s->cantxfg[FLEXCAN_TX_BUF_ID].can_id);
|
|
flexcan_write(ctrl, ®s->cantxfg[FLEXCAN_TX_BUF_ID].can_ctrl);
|
|
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
static void do_bus_err(struct net_device *dev,
|
|
struct can_frame *cf, u32 reg_esr)
|
|
{
|
|
struct flexcan_priv *priv = netdev_priv(dev);
|
|
int rx_errors = 0, tx_errors = 0;
|
|
|
|
cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
|
|
|
|
if (reg_esr & FLEXCAN_ESR_BIT1_ERR) {
|
|
netdev_dbg(dev, "BIT1_ERR irq\n");
|
|
cf->data[2] |= CAN_ERR_PROT_BIT1;
|
|
tx_errors = 1;
|
|
}
|
|
if (reg_esr & FLEXCAN_ESR_BIT0_ERR) {
|
|
netdev_dbg(dev, "BIT0_ERR irq\n");
|
|
cf->data[2] |= CAN_ERR_PROT_BIT0;
|
|
tx_errors = 1;
|
|
}
|
|
if (reg_esr & FLEXCAN_ESR_ACK_ERR) {
|
|
netdev_dbg(dev, "ACK_ERR irq\n");
|
|
cf->can_id |= CAN_ERR_ACK;
|
|
cf->data[3] |= CAN_ERR_PROT_LOC_ACK;
|
|
tx_errors = 1;
|
|
}
|
|
if (reg_esr & FLEXCAN_ESR_CRC_ERR) {
|
|
netdev_dbg(dev, "CRC_ERR irq\n");
|
|
cf->data[2] |= CAN_ERR_PROT_BIT;
|
|
cf->data[3] |= CAN_ERR_PROT_LOC_CRC_SEQ;
|
|
rx_errors = 1;
|
|
}
|
|
if (reg_esr & FLEXCAN_ESR_FRM_ERR) {
|
|
netdev_dbg(dev, "FRM_ERR irq\n");
|
|
cf->data[2] |= CAN_ERR_PROT_FORM;
|
|
rx_errors = 1;
|
|
}
|
|
if (reg_esr & FLEXCAN_ESR_STF_ERR) {
|
|
netdev_dbg(dev, "STF_ERR irq\n");
|
|
cf->data[2] |= CAN_ERR_PROT_STUFF;
|
|
rx_errors = 1;
|
|
}
|
|
|
|
priv->can.can_stats.bus_error++;
|
|
if (rx_errors)
|
|
dev->stats.rx_errors++;
|
|
if (tx_errors)
|
|
dev->stats.tx_errors++;
|
|
}
|
|
|
|
static int flexcan_poll_bus_err(struct net_device *dev, u32 reg_esr)
|
|
{
|
|
struct sk_buff *skb;
|
|
struct can_frame *cf;
|
|
|
|
skb = alloc_can_err_skb(dev, &cf);
|
|
if (unlikely(!skb))
|
|
return 0;
|
|
|
|
do_bus_err(dev, cf, reg_esr);
|
|
netif_receive_skb(skb);
|
|
|
|
dev->stats.rx_packets++;
|
|
dev->stats.rx_bytes += cf->can_dlc;
|
|
|
|
return 1;
|
|
}
|
|
|
|
static void do_state(struct net_device *dev,
|
|
struct can_frame *cf, enum can_state new_state)
|
|
{
|
|
struct flexcan_priv *priv = netdev_priv(dev);
|
|
struct can_berr_counter bec;
|
|
|
|
flexcan_get_berr_counter(dev, &bec);
|
|
|
|
switch (priv->can.state) {
|
|
case CAN_STATE_ERROR_ACTIVE:
|
|
/*
|
|
* from: ERROR_ACTIVE
|
|
* to : ERROR_WARNING, ERROR_PASSIVE, BUS_OFF
|
|
* => : there was a warning int
|
|
*/
|
|
if (new_state >= CAN_STATE_ERROR_WARNING &&
|
|
new_state <= CAN_STATE_BUS_OFF) {
|
|
netdev_dbg(dev, "Error Warning IRQ\n");
|
|
priv->can.can_stats.error_warning++;
|
|
|
|
cf->can_id |= CAN_ERR_CRTL;
|
|
cf->data[1] = (bec.txerr > bec.rxerr) ?
|
|
CAN_ERR_CRTL_TX_WARNING :
|
|
CAN_ERR_CRTL_RX_WARNING;
|
|
}
|
|
case CAN_STATE_ERROR_WARNING: /* fallthrough */
|
|
/*
|
|
* from: ERROR_ACTIVE, ERROR_WARNING
|
|
* to : ERROR_PASSIVE, BUS_OFF
|
|
* => : error passive int
|
|
*/
|
|
if (new_state >= CAN_STATE_ERROR_PASSIVE &&
|
|
new_state <= CAN_STATE_BUS_OFF) {
|
|
netdev_dbg(dev, "Error Passive IRQ\n");
|
|
priv->can.can_stats.error_passive++;
|
|
|
|
cf->can_id |= CAN_ERR_CRTL;
|
|
cf->data[1] = (bec.txerr > bec.rxerr) ?
|
|
CAN_ERR_CRTL_TX_PASSIVE :
|
|
CAN_ERR_CRTL_RX_PASSIVE;
|
|
}
|
|
break;
|
|
case CAN_STATE_BUS_OFF:
|
|
netdev_err(dev, "BUG! "
|
|
"hardware recovered automatically from BUS_OFF\n");
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
/* process state changes depending on the new state */
|
|
switch (new_state) {
|
|
case CAN_STATE_ERROR_ACTIVE:
|
|
netdev_dbg(dev, "Error Active\n");
|
|
cf->can_id |= CAN_ERR_PROT;
|
|
cf->data[2] = CAN_ERR_PROT_ACTIVE;
|
|
break;
|
|
case CAN_STATE_BUS_OFF:
|
|
cf->can_id |= CAN_ERR_BUSOFF;
|
|
can_bus_off(dev);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int flexcan_poll_state(struct net_device *dev, u32 reg_esr)
|
|
{
|
|
struct flexcan_priv *priv = netdev_priv(dev);
|
|
struct sk_buff *skb;
|
|
struct can_frame *cf;
|
|
enum can_state new_state;
|
|
int flt;
|
|
|
|
flt = reg_esr & FLEXCAN_ESR_FLT_CONF_MASK;
|
|
if (likely(flt == FLEXCAN_ESR_FLT_CONF_ACTIVE)) {
|
|
if (likely(!(reg_esr & (FLEXCAN_ESR_TX_WRN |
|
|
FLEXCAN_ESR_RX_WRN))))
|
|
new_state = CAN_STATE_ERROR_ACTIVE;
|
|
else
|
|
new_state = CAN_STATE_ERROR_WARNING;
|
|
} else if (unlikely(flt == FLEXCAN_ESR_FLT_CONF_PASSIVE))
|
|
new_state = CAN_STATE_ERROR_PASSIVE;
|
|
else
|
|
new_state = CAN_STATE_BUS_OFF;
|
|
|
|
/* state hasn't changed */
|
|
if (likely(new_state == priv->can.state))
|
|
return 0;
|
|
|
|
skb = alloc_can_err_skb(dev, &cf);
|
|
if (unlikely(!skb))
|
|
return 0;
|
|
|
|
do_state(dev, cf, new_state);
|
|
priv->can.state = new_state;
|
|
netif_receive_skb(skb);
|
|
|
|
dev->stats.rx_packets++;
|
|
dev->stats.rx_bytes += cf->can_dlc;
|
|
|
|
return 1;
|
|
}
|
|
|
|
static void flexcan_read_fifo(const struct net_device *dev,
|
|
struct can_frame *cf)
|
|
{
|
|
const struct flexcan_priv *priv = netdev_priv(dev);
|
|
struct flexcan_regs __iomem *regs = priv->base;
|
|
struct flexcan_mb __iomem *mb = ®s->cantxfg[0];
|
|
u32 reg_ctrl, reg_id;
|
|
|
|
reg_ctrl = flexcan_read(&mb->can_ctrl);
|
|
reg_id = flexcan_read(&mb->can_id);
|
|
if (reg_ctrl & FLEXCAN_MB_CNT_IDE)
|
|
cf->can_id = ((reg_id >> 0) & CAN_EFF_MASK) | CAN_EFF_FLAG;
|
|
else
|
|
cf->can_id = (reg_id >> 18) & CAN_SFF_MASK;
|
|
|
|
if (reg_ctrl & FLEXCAN_MB_CNT_RTR)
|
|
cf->can_id |= CAN_RTR_FLAG;
|
|
cf->can_dlc = get_can_dlc((reg_ctrl >> 16) & 0xf);
|
|
|
|
*(__be32 *)(cf->data + 0) = cpu_to_be32(flexcan_read(&mb->data[0]));
|
|
*(__be32 *)(cf->data + 4) = cpu_to_be32(flexcan_read(&mb->data[1]));
|
|
|
|
/* mark as read */
|
|
flexcan_write(FLEXCAN_IFLAG_RX_FIFO_AVAILABLE, ®s->iflag1);
|
|
flexcan_read(®s->timer);
|
|
}
|
|
|
|
static int flexcan_read_frame(struct net_device *dev)
|
|
{
|
|
struct net_device_stats *stats = &dev->stats;
|
|
struct can_frame *cf;
|
|
struct sk_buff *skb;
|
|
|
|
skb = alloc_can_skb(dev, &cf);
|
|
if (unlikely(!skb)) {
|
|
stats->rx_dropped++;
|
|
return 0;
|
|
}
|
|
|
|
flexcan_read_fifo(dev, cf);
|
|
netif_receive_skb(skb);
|
|
|
|
stats->rx_packets++;
|
|
stats->rx_bytes += cf->can_dlc;
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int flexcan_poll(struct napi_struct *napi, int quota)
|
|
{
|
|
struct net_device *dev = napi->dev;
|
|
const struct flexcan_priv *priv = netdev_priv(dev);
|
|
struct flexcan_regs __iomem *regs = priv->base;
|
|
u32 reg_iflag1, reg_esr;
|
|
int work_done = 0;
|
|
|
|
/*
|
|
* The error bits are cleared on read,
|
|
* use saved value from irq handler.
|
|
*/
|
|
reg_esr = flexcan_read(®s->esr) | priv->reg_esr;
|
|
|
|
/* handle state changes */
|
|
work_done += flexcan_poll_state(dev, reg_esr);
|
|
|
|
/* handle RX-FIFO */
|
|
reg_iflag1 = flexcan_read(®s->iflag1);
|
|
while (reg_iflag1 & FLEXCAN_IFLAG_RX_FIFO_AVAILABLE &&
|
|
work_done < quota) {
|
|
work_done += flexcan_read_frame(dev);
|
|
reg_iflag1 = flexcan_read(®s->iflag1);
|
|
}
|
|
|
|
/* report bus errors */
|
|
if (flexcan_has_and_handle_berr(priv, reg_esr) && work_done < quota)
|
|
work_done += flexcan_poll_bus_err(dev, reg_esr);
|
|
|
|
if (work_done < quota) {
|
|
napi_complete(napi);
|
|
/* enable IRQs */
|
|
flexcan_write(FLEXCAN_IFLAG_DEFAULT, ®s->imask1);
|
|
flexcan_write(priv->reg_ctrl_default, ®s->ctrl);
|
|
}
|
|
|
|
return work_done;
|
|
}
|
|
|
|
static irqreturn_t flexcan_irq(int irq, void *dev_id)
|
|
{
|
|
struct net_device *dev = dev_id;
|
|
struct net_device_stats *stats = &dev->stats;
|
|
struct flexcan_priv *priv = netdev_priv(dev);
|
|
struct flexcan_regs __iomem *regs = priv->base;
|
|
u32 reg_iflag1, reg_esr;
|
|
|
|
reg_iflag1 = flexcan_read(®s->iflag1);
|
|
reg_esr = flexcan_read(®s->esr);
|
|
/* ACK all bus error and state change IRQ sources */
|
|
if (reg_esr & FLEXCAN_ESR_ALL_INT)
|
|
flexcan_write(reg_esr & FLEXCAN_ESR_ALL_INT, ®s->esr);
|
|
|
|
/*
|
|
* schedule NAPI in case of:
|
|
* - rx IRQ
|
|
* - state change IRQ
|
|
* - bus error IRQ and bus error reporting is activated
|
|
*/
|
|
if ((reg_iflag1 & FLEXCAN_IFLAG_RX_FIFO_AVAILABLE) ||
|
|
(reg_esr & FLEXCAN_ESR_ERR_STATE) ||
|
|
flexcan_has_and_handle_berr(priv, reg_esr)) {
|
|
/*
|
|
* The error bits are cleared on read,
|
|
* save them for later use.
|
|
*/
|
|
priv->reg_esr = reg_esr & FLEXCAN_ESR_ERR_BUS;
|
|
flexcan_write(FLEXCAN_IFLAG_DEFAULT &
|
|
~FLEXCAN_IFLAG_RX_FIFO_AVAILABLE, ®s->imask1);
|
|
flexcan_write(priv->reg_ctrl_default & ~FLEXCAN_CTRL_ERR_ALL,
|
|
®s->ctrl);
|
|
napi_schedule(&priv->napi);
|
|
}
|
|
|
|
/* FIFO overflow */
|
|
if (reg_iflag1 & FLEXCAN_IFLAG_RX_FIFO_OVERFLOW) {
|
|
flexcan_write(FLEXCAN_IFLAG_RX_FIFO_OVERFLOW, ®s->iflag1);
|
|
dev->stats.rx_over_errors++;
|
|
dev->stats.rx_errors++;
|
|
}
|
|
|
|
/* transmission complete interrupt */
|
|
if (reg_iflag1 & (1 << FLEXCAN_TX_BUF_ID)) {
|
|
stats->tx_bytes += can_get_echo_skb(dev, 0);
|
|
stats->tx_packets++;
|
|
flexcan_write((1 << FLEXCAN_TX_BUF_ID), ®s->iflag1);
|
|
netif_wake_queue(dev);
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void flexcan_set_bittiming(struct net_device *dev)
|
|
{
|
|
const struct flexcan_priv *priv = netdev_priv(dev);
|
|
const struct can_bittiming *bt = &priv->can.bittiming;
|
|
struct flexcan_regs __iomem *regs = priv->base;
|
|
u32 reg;
|
|
|
|
reg = flexcan_read(®s->ctrl);
|
|
reg &= ~(FLEXCAN_CTRL_PRESDIV(0xff) |
|
|
FLEXCAN_CTRL_RJW(0x3) |
|
|
FLEXCAN_CTRL_PSEG1(0x7) |
|
|
FLEXCAN_CTRL_PSEG2(0x7) |
|
|
FLEXCAN_CTRL_PROPSEG(0x7) |
|
|
FLEXCAN_CTRL_LPB |
|
|
FLEXCAN_CTRL_SMP |
|
|
FLEXCAN_CTRL_LOM);
|
|
|
|
reg |= FLEXCAN_CTRL_PRESDIV(bt->brp - 1) |
|
|
FLEXCAN_CTRL_PSEG1(bt->phase_seg1 - 1) |
|
|
FLEXCAN_CTRL_PSEG2(bt->phase_seg2 - 1) |
|
|
FLEXCAN_CTRL_RJW(bt->sjw - 1) |
|
|
FLEXCAN_CTRL_PROPSEG(bt->prop_seg - 1);
|
|
|
|
if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK)
|
|
reg |= FLEXCAN_CTRL_LPB;
|
|
if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY)
|
|
reg |= FLEXCAN_CTRL_LOM;
|
|
if (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES)
|
|
reg |= FLEXCAN_CTRL_SMP;
|
|
|
|
netdev_info(dev, "writing ctrl=0x%08x\n", reg);
|
|
flexcan_write(reg, ®s->ctrl);
|
|
|
|
/* print chip status */
|
|
netdev_dbg(dev, "%s: mcr=0x%08x ctrl=0x%08x\n", __func__,
|
|
flexcan_read(®s->mcr), flexcan_read(®s->ctrl));
|
|
}
|
|
|
|
/*
|
|
* flexcan_chip_start
|
|
*
|
|
* this functions is entered with clocks enabled
|
|
*
|
|
*/
|
|
static int flexcan_chip_start(struct net_device *dev)
|
|
{
|
|
struct flexcan_priv *priv = netdev_priv(dev);
|
|
struct flexcan_regs __iomem *regs = priv->base;
|
|
unsigned int i;
|
|
int err;
|
|
u32 reg_mcr, reg_ctrl;
|
|
|
|
/* enable module */
|
|
flexcan_chip_enable(priv);
|
|
|
|
/* soft reset */
|
|
flexcan_write(FLEXCAN_MCR_SOFTRST, ®s->mcr);
|
|
udelay(10);
|
|
|
|
reg_mcr = flexcan_read(®s->mcr);
|
|
if (reg_mcr & FLEXCAN_MCR_SOFTRST) {
|
|
netdev_err(dev, "Failed to softreset can module (mcr=0x%08x)\n",
|
|
reg_mcr);
|
|
err = -ENODEV;
|
|
goto out;
|
|
}
|
|
|
|
flexcan_set_bittiming(dev);
|
|
|
|
/*
|
|
* MCR
|
|
*
|
|
* enable freeze
|
|
* enable fifo
|
|
* halt now
|
|
* only supervisor access
|
|
* enable warning int
|
|
* choose format C
|
|
* disable local echo
|
|
*
|
|
*/
|
|
reg_mcr = flexcan_read(®s->mcr);
|
|
reg_mcr |= FLEXCAN_MCR_FRZ | FLEXCAN_MCR_FEN | FLEXCAN_MCR_HALT |
|
|
FLEXCAN_MCR_SUPV | FLEXCAN_MCR_WRN_EN |
|
|
FLEXCAN_MCR_IDAM_C | FLEXCAN_MCR_SRX_DIS;
|
|
netdev_dbg(dev, "%s: writing mcr=0x%08x", __func__, reg_mcr);
|
|
flexcan_write(reg_mcr, ®s->mcr);
|
|
|
|
/*
|
|
* CTRL
|
|
*
|
|
* disable timer sync feature
|
|
*
|
|
* disable auto busoff recovery
|
|
* transmit lowest buffer first
|
|
*
|
|
* enable tx and rx warning interrupt
|
|
* enable bus off interrupt
|
|
* (== FLEXCAN_CTRL_ERR_STATE)
|
|
*/
|
|
reg_ctrl = flexcan_read(®s->ctrl);
|
|
reg_ctrl &= ~FLEXCAN_CTRL_TSYN;
|
|
reg_ctrl |= FLEXCAN_CTRL_BOFF_REC | FLEXCAN_CTRL_LBUF |
|
|
FLEXCAN_CTRL_ERR_STATE;
|
|
/*
|
|
* enable the "error interrupt" (FLEXCAN_CTRL_ERR_MSK),
|
|
* on most Flexcan cores, too. Otherwise we don't get
|
|
* any error warning or passive interrupts.
|
|
*/
|
|
if (priv->devtype_data->features & FLEXCAN_HAS_BROKEN_ERR_STATE ||
|
|
priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING)
|
|
reg_ctrl |= FLEXCAN_CTRL_ERR_MSK;
|
|
|
|
/* save for later use */
|
|
priv->reg_ctrl_default = reg_ctrl;
|
|
netdev_dbg(dev, "%s: writing ctrl=0x%08x", __func__, reg_ctrl);
|
|
flexcan_write(reg_ctrl, ®s->ctrl);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(regs->cantxfg); i++) {
|
|
flexcan_write(0, ®s->cantxfg[i].can_ctrl);
|
|
flexcan_write(0, ®s->cantxfg[i].can_id);
|
|
flexcan_write(0, ®s->cantxfg[i].data[0]);
|
|
flexcan_write(0, ®s->cantxfg[i].data[1]);
|
|
|
|
/* put MB into rx queue */
|
|
flexcan_write(FLEXCAN_MB_CNT_CODE(0x4),
|
|
®s->cantxfg[i].can_ctrl);
|
|
}
|
|
|
|
/* acceptance mask/acceptance code (accept everything) */
|
|
flexcan_write(0x0, ®s->rxgmask);
|
|
flexcan_write(0x0, ®s->rx14mask);
|
|
flexcan_write(0x0, ®s->rx15mask);
|
|
|
|
if (priv->devtype_data->features & FLEXCAN_HAS_V10_FEATURES)
|
|
flexcan_write(0x0, ®s->rxfgmask);
|
|
|
|
flexcan_transceiver_switch(priv, 1);
|
|
|
|
/* synchronize with the can bus */
|
|
reg_mcr = flexcan_read(®s->mcr);
|
|
reg_mcr &= ~FLEXCAN_MCR_HALT;
|
|
flexcan_write(reg_mcr, ®s->mcr);
|
|
|
|
priv->can.state = CAN_STATE_ERROR_ACTIVE;
|
|
|
|
/* enable FIFO interrupts */
|
|
flexcan_write(FLEXCAN_IFLAG_DEFAULT, ®s->imask1);
|
|
|
|
/* print chip status */
|
|
netdev_dbg(dev, "%s: reading mcr=0x%08x ctrl=0x%08x\n", __func__,
|
|
flexcan_read(®s->mcr), flexcan_read(®s->ctrl));
|
|
|
|
return 0;
|
|
|
|
out:
|
|
flexcan_chip_disable(priv);
|
|
return err;
|
|
}
|
|
|
|
/*
|
|
* flexcan_chip_stop
|
|
*
|
|
* this functions is entered with clocks enabled
|
|
*
|
|
*/
|
|
static void flexcan_chip_stop(struct net_device *dev)
|
|
{
|
|
struct flexcan_priv *priv = netdev_priv(dev);
|
|
struct flexcan_regs __iomem *regs = priv->base;
|
|
u32 reg;
|
|
|
|
/* Disable all interrupts */
|
|
flexcan_write(0, ®s->imask1);
|
|
|
|
/* Disable + halt module */
|
|
reg = flexcan_read(®s->mcr);
|
|
reg |= FLEXCAN_MCR_MDIS | FLEXCAN_MCR_HALT;
|
|
flexcan_write(reg, ®s->mcr);
|
|
|
|
flexcan_transceiver_switch(priv, 0);
|
|
priv->can.state = CAN_STATE_STOPPED;
|
|
|
|
return;
|
|
}
|
|
|
|
static int flexcan_open(struct net_device *dev)
|
|
{
|
|
struct flexcan_priv *priv = netdev_priv(dev);
|
|
int err;
|
|
|
|
clk_prepare_enable(priv->clk_ipg);
|
|
clk_prepare_enable(priv->clk_per);
|
|
|
|
err = open_candev(dev);
|
|
if (err)
|
|
goto out;
|
|
|
|
err = request_irq(dev->irq, flexcan_irq, IRQF_SHARED, dev->name, dev);
|
|
if (err)
|
|
goto out_close;
|
|
|
|
/* start chip and queuing */
|
|
err = flexcan_chip_start(dev);
|
|
if (err)
|
|
goto out_close;
|
|
napi_enable(&priv->napi);
|
|
netif_start_queue(dev);
|
|
|
|
return 0;
|
|
|
|
out_close:
|
|
close_candev(dev);
|
|
out:
|
|
clk_disable_unprepare(priv->clk_per);
|
|
clk_disable_unprepare(priv->clk_ipg);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int flexcan_close(struct net_device *dev)
|
|
{
|
|
struct flexcan_priv *priv = netdev_priv(dev);
|
|
|
|
netif_stop_queue(dev);
|
|
napi_disable(&priv->napi);
|
|
flexcan_chip_stop(dev);
|
|
|
|
free_irq(dev->irq, dev);
|
|
clk_disable_unprepare(priv->clk_per);
|
|
clk_disable_unprepare(priv->clk_ipg);
|
|
|
|
close_candev(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int flexcan_set_mode(struct net_device *dev, enum can_mode mode)
|
|
{
|
|
int err;
|
|
|
|
switch (mode) {
|
|
case CAN_MODE_START:
|
|
err = flexcan_chip_start(dev);
|
|
if (err)
|
|
return err;
|
|
|
|
netif_wake_queue(dev);
|
|
break;
|
|
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct net_device_ops flexcan_netdev_ops = {
|
|
.ndo_open = flexcan_open,
|
|
.ndo_stop = flexcan_close,
|
|
.ndo_start_xmit = flexcan_start_xmit,
|
|
};
|
|
|
|
static int register_flexcandev(struct net_device *dev)
|
|
{
|
|
struct flexcan_priv *priv = netdev_priv(dev);
|
|
struct flexcan_regs __iomem *regs = priv->base;
|
|
u32 reg, err;
|
|
|
|
clk_prepare_enable(priv->clk_ipg);
|
|
clk_prepare_enable(priv->clk_per);
|
|
|
|
/* select "bus clock", chip must be disabled */
|
|
flexcan_chip_disable(priv);
|
|
reg = flexcan_read(®s->ctrl);
|
|
reg |= FLEXCAN_CTRL_CLK_SRC;
|
|
flexcan_write(reg, ®s->ctrl);
|
|
|
|
flexcan_chip_enable(priv);
|
|
|
|
/* set freeze, halt and activate FIFO, restrict register access */
|
|
reg = flexcan_read(®s->mcr);
|
|
reg |= FLEXCAN_MCR_FRZ | FLEXCAN_MCR_HALT |
|
|
FLEXCAN_MCR_FEN | FLEXCAN_MCR_SUPV;
|
|
flexcan_write(reg, ®s->mcr);
|
|
|
|
/*
|
|
* Currently we only support newer versions of this core
|
|
* featuring a RX FIFO. Older cores found on some Coldfire
|
|
* derivates are not yet supported.
|
|
*/
|
|
reg = flexcan_read(®s->mcr);
|
|
if (!(reg & FLEXCAN_MCR_FEN)) {
|
|
netdev_err(dev, "Could not enable RX FIFO, unsupported core\n");
|
|
err = -ENODEV;
|
|
goto out;
|
|
}
|
|
|
|
err = register_candev(dev);
|
|
|
|
out:
|
|
/* disable core and turn off clocks */
|
|
flexcan_chip_disable(priv);
|
|
clk_disable_unprepare(priv->clk_per);
|
|
clk_disable_unprepare(priv->clk_ipg);
|
|
|
|
return err;
|
|
}
|
|
|
|
static void unregister_flexcandev(struct net_device *dev)
|
|
{
|
|
unregister_candev(dev);
|
|
}
|
|
|
|
static const struct of_device_id flexcan_of_match[] = {
|
|
{ .compatible = "fsl,p1010-flexcan", .data = &fsl_p1010_devtype_data, },
|
|
{ .compatible = "fsl,imx28-flexcan", .data = &fsl_imx28_devtype_data, },
|
|
{ .compatible = "fsl,imx6q-flexcan", .data = &fsl_imx6q_devtype_data, },
|
|
{ /* sentinel */ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, flexcan_of_match);
|
|
|
|
static const struct platform_device_id flexcan_id_table[] = {
|
|
{ .name = "flexcan", .driver_data = (kernel_ulong_t)&fsl_p1010_devtype_data, },
|
|
{ /* sentinel */ },
|
|
};
|
|
MODULE_DEVICE_TABLE(platform, flexcan_id_table);
|
|
|
|
static int flexcan_probe(struct platform_device *pdev)
|
|
{
|
|
const struct of_device_id *of_id;
|
|
const struct flexcan_devtype_data *devtype_data;
|
|
struct net_device *dev;
|
|
struct flexcan_priv *priv;
|
|
struct resource *mem;
|
|
struct clk *clk_ipg = NULL, *clk_per = NULL;
|
|
struct pinctrl *pinctrl;
|
|
void __iomem *base;
|
|
resource_size_t mem_size;
|
|
int err, irq;
|
|
u32 clock_freq = 0;
|
|
|
|
pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
|
|
if (IS_ERR(pinctrl))
|
|
return PTR_ERR(pinctrl);
|
|
|
|
if (pdev->dev.of_node)
|
|
of_property_read_u32(pdev->dev.of_node,
|
|
"clock-frequency", &clock_freq);
|
|
|
|
if (!clock_freq) {
|
|
clk_ipg = devm_clk_get(&pdev->dev, "ipg");
|
|
if (IS_ERR(clk_ipg)) {
|
|
dev_err(&pdev->dev, "no ipg clock defined\n");
|
|
err = PTR_ERR(clk_ipg);
|
|
goto failed_clock;
|
|
}
|
|
clock_freq = clk_get_rate(clk_ipg);
|
|
|
|
clk_per = devm_clk_get(&pdev->dev, "per");
|
|
if (IS_ERR(clk_per)) {
|
|
dev_err(&pdev->dev, "no per clock defined\n");
|
|
err = PTR_ERR(clk_per);
|
|
goto failed_clock;
|
|
}
|
|
}
|
|
|
|
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (!mem || irq <= 0) {
|
|
err = -ENODEV;
|
|
goto failed_get;
|
|
}
|
|
|
|
mem_size = resource_size(mem);
|
|
if (!request_mem_region(mem->start, mem_size, pdev->name)) {
|
|
err = -EBUSY;
|
|
goto failed_get;
|
|
}
|
|
|
|
base = ioremap(mem->start, mem_size);
|
|
if (!base) {
|
|
err = -ENOMEM;
|
|
goto failed_map;
|
|
}
|
|
|
|
dev = alloc_candev(sizeof(struct flexcan_priv), 1);
|
|
if (!dev) {
|
|
err = -ENOMEM;
|
|
goto failed_alloc;
|
|
}
|
|
|
|
of_id = of_match_device(flexcan_of_match, &pdev->dev);
|
|
if (of_id) {
|
|
devtype_data = of_id->data;
|
|
} else if (pdev->id_entry->driver_data) {
|
|
devtype_data = (struct flexcan_devtype_data *)
|
|
pdev->id_entry->driver_data;
|
|
} else {
|
|
err = -ENODEV;
|
|
goto failed_devtype;
|
|
}
|
|
|
|
dev->netdev_ops = &flexcan_netdev_ops;
|
|
dev->irq = irq;
|
|
dev->flags |= IFF_ECHO;
|
|
|
|
priv = netdev_priv(dev);
|
|
priv->can.clock.freq = clock_freq;
|
|
priv->can.bittiming_const = &flexcan_bittiming_const;
|
|
priv->can.do_set_mode = flexcan_set_mode;
|
|
priv->can.do_get_berr_counter = flexcan_get_berr_counter;
|
|
priv->can.ctrlmode_supported = CAN_CTRLMODE_LOOPBACK |
|
|
CAN_CTRLMODE_LISTENONLY | CAN_CTRLMODE_3_SAMPLES |
|
|
CAN_CTRLMODE_BERR_REPORTING;
|
|
priv->base = base;
|
|
priv->dev = dev;
|
|
priv->clk_ipg = clk_ipg;
|
|
priv->clk_per = clk_per;
|
|
priv->pdata = pdev->dev.platform_data;
|
|
priv->devtype_data = devtype_data;
|
|
|
|
netif_napi_add(dev, &priv->napi, flexcan_poll, FLEXCAN_NAPI_WEIGHT);
|
|
|
|
dev_set_drvdata(&pdev->dev, dev);
|
|
SET_NETDEV_DEV(dev, &pdev->dev);
|
|
|
|
err = register_flexcandev(dev);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "registering netdev failed\n");
|
|
goto failed_register;
|
|
}
|
|
|
|
dev_info(&pdev->dev, "device registered (reg_base=%p, irq=%d)\n",
|
|
priv->base, dev->irq);
|
|
|
|
return 0;
|
|
|
|
failed_register:
|
|
failed_devtype:
|
|
free_candev(dev);
|
|
failed_alloc:
|
|
iounmap(base);
|
|
failed_map:
|
|
release_mem_region(mem->start, mem_size);
|
|
failed_get:
|
|
failed_clock:
|
|
return err;
|
|
}
|
|
|
|
static int flexcan_remove(struct platform_device *pdev)
|
|
{
|
|
struct net_device *dev = platform_get_drvdata(pdev);
|
|
struct flexcan_priv *priv = netdev_priv(dev);
|
|
struct resource *mem;
|
|
|
|
unregister_flexcandev(dev);
|
|
platform_set_drvdata(pdev, NULL);
|
|
iounmap(priv->base);
|
|
|
|
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
release_mem_region(mem->start, resource_size(mem));
|
|
|
|
free_candev(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int flexcan_suspend(struct platform_device *pdev, pm_message_t state)
|
|
{
|
|
struct net_device *dev = platform_get_drvdata(pdev);
|
|
struct flexcan_priv *priv = netdev_priv(dev);
|
|
|
|
flexcan_chip_disable(priv);
|
|
|
|
if (netif_running(dev)) {
|
|
netif_stop_queue(dev);
|
|
netif_device_detach(dev);
|
|
}
|
|
priv->can.state = CAN_STATE_SLEEPING;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int flexcan_resume(struct platform_device *pdev)
|
|
{
|
|
struct net_device *dev = platform_get_drvdata(pdev);
|
|
struct flexcan_priv *priv = netdev_priv(dev);
|
|
|
|
priv->can.state = CAN_STATE_ERROR_ACTIVE;
|
|
if (netif_running(dev)) {
|
|
netif_device_attach(dev);
|
|
netif_start_queue(dev);
|
|
}
|
|
flexcan_chip_enable(priv);
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
#define flexcan_suspend NULL
|
|
#define flexcan_resume NULL
|
|
#endif
|
|
|
|
static struct platform_driver flexcan_driver = {
|
|
.driver = {
|
|
.name = DRV_NAME,
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = flexcan_of_match,
|
|
},
|
|
.probe = flexcan_probe,
|
|
.remove = flexcan_remove,
|
|
.suspend = flexcan_suspend,
|
|
.resume = flexcan_resume,
|
|
.id_table = flexcan_id_table,
|
|
};
|
|
|
|
module_platform_driver(flexcan_driver);
|
|
|
|
MODULE_AUTHOR("Sascha Hauer <kernel@pengutronix.de>, "
|
|
"Marc Kleine-Budde <kernel@pengutronix.de>");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_DESCRIPTION("CAN port driver for flexcan based chip");
|