mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-15 22:36:42 +07:00
bc2b7dab62
Adds a new per-device sysfs attribute "current_timestamp_clock" to allow userspace to select a particular POSIX clock for buffered samples and events timestamping. Following clocks, as listed in clock_gettime(2), are supported: CLOCK_REALTIME, CLOCK_MONOTONIC, CLOCK_MONOTONIC_RAW, CLOCK_REALTIME_COARSE, CLOCK_MONOTONIC_COARSE, CLOCK_BOOTTIME and CLOCK_TAI. Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com> Acked-by: Sanchayan Maity <maitysanchayan@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
1647 lines
46 KiB
C
1647 lines
46 KiB
C
/*
|
|
* Copyright (C) 2013 Samsung Electronics Co., Ltd.
|
|
* Author: Jacek Anaszewski <j.anaszewski@samsung.com>
|
|
*
|
|
* IIO features supported by the driver:
|
|
*
|
|
* Read-only raw channels:
|
|
* - illuminance_clear [lux]
|
|
* - illuminance_ir
|
|
* - proximity
|
|
*
|
|
* Triggered buffer:
|
|
* - illuminance_clear
|
|
* - illuminance_ir
|
|
* - proximity
|
|
*
|
|
* Events:
|
|
* - illuminance_clear (rising and falling)
|
|
* - proximity (rising and falling)
|
|
* - both falling and rising thresholds for the proximity events
|
|
* must be set to the values greater than 0.
|
|
*
|
|
* The driver supports triggered buffers for all the three
|
|
* channels as well as high and low threshold events for the
|
|
* illuminance_clear and proxmimity channels. Triggers
|
|
* can be enabled simultaneously with both illuminance_clear
|
|
* events. Proximity events cannot be enabled simultaneously
|
|
* with any triggers or illuminance events. Enabling/disabling
|
|
* one of the proximity events automatically enables/disables
|
|
* the other one.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2, as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/debugfs.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/irq_work.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/of.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/slab.h>
|
|
#include <asm/unaligned.h>
|
|
#include <linux/iio/buffer.h>
|
|
#include <linux/iio/events.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
#include <linux/iio/trigger.h>
|
|
#include <linux/iio/trigger_consumer.h>
|
|
#include <linux/iio/triggered_buffer.h>
|
|
|
|
#define GP2A_I2C_NAME "gp2ap020a00f"
|
|
|
|
/* Registers */
|
|
#define GP2AP020A00F_OP_REG 0x00 /* Basic operations */
|
|
#define GP2AP020A00F_ALS_REG 0x01 /* ALS related settings */
|
|
#define GP2AP020A00F_PS_REG 0x02 /* PS related settings */
|
|
#define GP2AP020A00F_LED_REG 0x03 /* LED reg */
|
|
#define GP2AP020A00F_TL_L_REG 0x04 /* ALS: Threshold low LSB */
|
|
#define GP2AP020A00F_TL_H_REG 0x05 /* ALS: Threshold low MSB */
|
|
#define GP2AP020A00F_TH_L_REG 0x06 /* ALS: Threshold high LSB */
|
|
#define GP2AP020A00F_TH_H_REG 0x07 /* ALS: Threshold high MSB */
|
|
#define GP2AP020A00F_PL_L_REG 0x08 /* PS: Threshold low LSB */
|
|
#define GP2AP020A00F_PL_H_REG 0x09 /* PS: Threshold low MSB */
|
|
#define GP2AP020A00F_PH_L_REG 0x0a /* PS: Threshold high LSB */
|
|
#define GP2AP020A00F_PH_H_REG 0x0b /* PS: Threshold high MSB */
|
|
#define GP2AP020A00F_D0_L_REG 0x0c /* ALS result: Clear/Illuminance LSB */
|
|
#define GP2AP020A00F_D0_H_REG 0x0d /* ALS result: Clear/Illuminance MSB */
|
|
#define GP2AP020A00F_D1_L_REG 0x0e /* ALS result: IR LSB */
|
|
#define GP2AP020A00F_D1_H_REG 0x0f /* ALS result: IR LSB */
|
|
#define GP2AP020A00F_D2_L_REG 0x10 /* PS result LSB */
|
|
#define GP2AP020A00F_D2_H_REG 0x11 /* PS result MSB */
|
|
#define GP2AP020A00F_NUM_REGS 0x12 /* Number of registers */
|
|
|
|
/* OP_REG bits */
|
|
#define GP2AP020A00F_OP3_MASK 0x80 /* Software shutdown */
|
|
#define GP2AP020A00F_OP3_SHUTDOWN 0x00
|
|
#define GP2AP020A00F_OP3_OPERATION 0x80
|
|
#define GP2AP020A00F_OP2_MASK 0x40 /* Auto shutdown/Continuous mode */
|
|
#define GP2AP020A00F_OP2_AUTO_SHUTDOWN 0x00
|
|
#define GP2AP020A00F_OP2_CONT_OPERATION 0x40
|
|
#define GP2AP020A00F_OP_MASK 0x30 /* Operating mode selection */
|
|
#define GP2AP020A00F_OP_ALS_AND_PS 0x00
|
|
#define GP2AP020A00F_OP_ALS 0x10
|
|
#define GP2AP020A00F_OP_PS 0x20
|
|
#define GP2AP020A00F_OP_DEBUG 0x30
|
|
#define GP2AP020A00F_PROX_MASK 0x08 /* PS: detection/non-detection */
|
|
#define GP2AP020A00F_PROX_NON_DETECT 0x00
|
|
#define GP2AP020A00F_PROX_DETECT 0x08
|
|
#define GP2AP020A00F_FLAG_P 0x04 /* PS: interrupt result */
|
|
#define GP2AP020A00F_FLAG_A 0x02 /* ALS: interrupt result */
|
|
#define GP2AP020A00F_TYPE_MASK 0x01 /* Output data type selection */
|
|
#define GP2AP020A00F_TYPE_MANUAL_CALC 0x00
|
|
#define GP2AP020A00F_TYPE_AUTO_CALC 0x01
|
|
|
|
/* ALS_REG bits */
|
|
#define GP2AP020A00F_PRST_MASK 0xc0 /* Number of measurement cycles */
|
|
#define GP2AP020A00F_PRST_ONCE 0x00
|
|
#define GP2AP020A00F_PRST_4_CYCLES 0x40
|
|
#define GP2AP020A00F_PRST_8_CYCLES 0x80
|
|
#define GP2AP020A00F_PRST_16_CYCLES 0xc0
|
|
#define GP2AP020A00F_RES_A_MASK 0x38 /* ALS: Resolution */
|
|
#define GP2AP020A00F_RES_A_800ms 0x00
|
|
#define GP2AP020A00F_RES_A_400ms 0x08
|
|
#define GP2AP020A00F_RES_A_200ms 0x10
|
|
#define GP2AP020A00F_RES_A_100ms 0x18
|
|
#define GP2AP020A00F_RES_A_25ms 0x20
|
|
#define GP2AP020A00F_RES_A_6_25ms 0x28
|
|
#define GP2AP020A00F_RES_A_1_56ms 0x30
|
|
#define GP2AP020A00F_RES_A_0_39ms 0x38
|
|
#define GP2AP020A00F_RANGE_A_MASK 0x07 /* ALS: Max measurable range */
|
|
#define GP2AP020A00F_RANGE_A_x1 0x00
|
|
#define GP2AP020A00F_RANGE_A_x2 0x01
|
|
#define GP2AP020A00F_RANGE_A_x4 0x02
|
|
#define GP2AP020A00F_RANGE_A_x8 0x03
|
|
#define GP2AP020A00F_RANGE_A_x16 0x04
|
|
#define GP2AP020A00F_RANGE_A_x32 0x05
|
|
#define GP2AP020A00F_RANGE_A_x64 0x06
|
|
#define GP2AP020A00F_RANGE_A_x128 0x07
|
|
|
|
/* PS_REG bits */
|
|
#define GP2AP020A00F_ALC_MASK 0x80 /* Auto light cancel */
|
|
#define GP2AP020A00F_ALC_ON 0x80
|
|
#define GP2AP020A00F_ALC_OFF 0x00
|
|
#define GP2AP020A00F_INTTYPE_MASK 0x40 /* Interrupt type setting */
|
|
#define GP2AP020A00F_INTTYPE_LEVEL 0x00
|
|
#define GP2AP020A00F_INTTYPE_PULSE 0x40
|
|
#define GP2AP020A00F_RES_P_MASK 0x38 /* PS: Resolution */
|
|
#define GP2AP020A00F_RES_P_800ms_x2 0x00
|
|
#define GP2AP020A00F_RES_P_400ms_x2 0x08
|
|
#define GP2AP020A00F_RES_P_200ms_x2 0x10
|
|
#define GP2AP020A00F_RES_P_100ms_x2 0x18
|
|
#define GP2AP020A00F_RES_P_25ms_x2 0x20
|
|
#define GP2AP020A00F_RES_P_6_25ms_x2 0x28
|
|
#define GP2AP020A00F_RES_P_1_56ms_x2 0x30
|
|
#define GP2AP020A00F_RES_P_0_39ms_x2 0x38
|
|
#define GP2AP020A00F_RANGE_P_MASK 0x07 /* PS: Max measurable range */
|
|
#define GP2AP020A00F_RANGE_P_x1 0x00
|
|
#define GP2AP020A00F_RANGE_P_x2 0x01
|
|
#define GP2AP020A00F_RANGE_P_x4 0x02
|
|
#define GP2AP020A00F_RANGE_P_x8 0x03
|
|
#define GP2AP020A00F_RANGE_P_x16 0x04
|
|
#define GP2AP020A00F_RANGE_P_x32 0x05
|
|
#define GP2AP020A00F_RANGE_P_x64 0x06
|
|
#define GP2AP020A00F_RANGE_P_x128 0x07
|
|
|
|
/* LED reg bits */
|
|
#define GP2AP020A00F_INTVAL_MASK 0xc0 /* Intermittent operating */
|
|
#define GP2AP020A00F_INTVAL_0 0x00
|
|
#define GP2AP020A00F_INTVAL_4 0x40
|
|
#define GP2AP020A00F_INTVAL_8 0x80
|
|
#define GP2AP020A00F_INTVAL_16 0xc0
|
|
#define GP2AP020A00F_IS_MASK 0x30 /* ILED drive peak current */
|
|
#define GP2AP020A00F_IS_13_8mA 0x00
|
|
#define GP2AP020A00F_IS_27_5mA 0x10
|
|
#define GP2AP020A00F_IS_55mA 0x20
|
|
#define GP2AP020A00F_IS_110mA 0x30
|
|
#define GP2AP020A00F_PIN_MASK 0x0c /* INT terminal setting */
|
|
#define GP2AP020A00F_PIN_ALS_OR_PS 0x00
|
|
#define GP2AP020A00F_PIN_ALS 0x04
|
|
#define GP2AP020A00F_PIN_PS 0x08
|
|
#define GP2AP020A00F_PIN_PS_DETECT 0x0c
|
|
#define GP2AP020A00F_FREQ_MASK 0x02 /* LED modulation frequency */
|
|
#define GP2AP020A00F_FREQ_327_5kHz 0x00
|
|
#define GP2AP020A00F_FREQ_81_8kHz 0x02
|
|
#define GP2AP020A00F_RST 0x01 /* Software reset */
|
|
|
|
#define GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR 0
|
|
#define GP2AP020A00F_SCAN_MODE_LIGHT_IR 1
|
|
#define GP2AP020A00F_SCAN_MODE_PROXIMITY 2
|
|
#define GP2AP020A00F_CHAN_TIMESTAMP 3
|
|
|
|
#define GP2AP020A00F_DATA_READY_TIMEOUT msecs_to_jiffies(1000)
|
|
#define GP2AP020A00F_DATA_REG(chan) (GP2AP020A00F_D0_L_REG + \
|
|
(chan) * 2)
|
|
#define GP2AP020A00F_THRESH_REG(th_val_id) (GP2AP020A00F_TL_L_REG + \
|
|
(th_val_id) * 2)
|
|
#define GP2AP020A00F_THRESH_VAL_ID(reg_addr) ((reg_addr - 4) / 2)
|
|
|
|
#define GP2AP020A00F_SUBTRACT_MODE 0
|
|
#define GP2AP020A00F_ADD_MODE 1
|
|
|
|
#define GP2AP020A00F_MAX_CHANNELS 3
|
|
|
|
enum gp2ap020a00f_opmode {
|
|
GP2AP020A00F_OPMODE_READ_RAW_CLEAR,
|
|
GP2AP020A00F_OPMODE_READ_RAW_IR,
|
|
GP2AP020A00F_OPMODE_READ_RAW_PROXIMITY,
|
|
GP2AP020A00F_OPMODE_ALS,
|
|
GP2AP020A00F_OPMODE_PS,
|
|
GP2AP020A00F_OPMODE_ALS_AND_PS,
|
|
GP2AP020A00F_OPMODE_PROX_DETECT,
|
|
GP2AP020A00F_OPMODE_SHUTDOWN,
|
|
GP2AP020A00F_NUM_OPMODES,
|
|
};
|
|
|
|
enum gp2ap020a00f_cmd {
|
|
GP2AP020A00F_CMD_READ_RAW_CLEAR,
|
|
GP2AP020A00F_CMD_READ_RAW_IR,
|
|
GP2AP020A00F_CMD_READ_RAW_PROXIMITY,
|
|
GP2AP020A00F_CMD_TRIGGER_CLEAR_EN,
|
|
GP2AP020A00F_CMD_TRIGGER_CLEAR_DIS,
|
|
GP2AP020A00F_CMD_TRIGGER_IR_EN,
|
|
GP2AP020A00F_CMD_TRIGGER_IR_DIS,
|
|
GP2AP020A00F_CMD_TRIGGER_PROX_EN,
|
|
GP2AP020A00F_CMD_TRIGGER_PROX_DIS,
|
|
GP2AP020A00F_CMD_ALS_HIGH_EV_EN,
|
|
GP2AP020A00F_CMD_ALS_HIGH_EV_DIS,
|
|
GP2AP020A00F_CMD_ALS_LOW_EV_EN,
|
|
GP2AP020A00F_CMD_ALS_LOW_EV_DIS,
|
|
GP2AP020A00F_CMD_PROX_HIGH_EV_EN,
|
|
GP2AP020A00F_CMD_PROX_HIGH_EV_DIS,
|
|
GP2AP020A00F_CMD_PROX_LOW_EV_EN,
|
|
GP2AP020A00F_CMD_PROX_LOW_EV_DIS,
|
|
};
|
|
|
|
enum gp2ap020a00f_flags {
|
|
GP2AP020A00F_FLAG_ALS_CLEAR_TRIGGER,
|
|
GP2AP020A00F_FLAG_ALS_IR_TRIGGER,
|
|
GP2AP020A00F_FLAG_PROX_TRIGGER,
|
|
GP2AP020A00F_FLAG_PROX_RISING_EV,
|
|
GP2AP020A00F_FLAG_PROX_FALLING_EV,
|
|
GP2AP020A00F_FLAG_ALS_RISING_EV,
|
|
GP2AP020A00F_FLAG_ALS_FALLING_EV,
|
|
GP2AP020A00F_FLAG_LUX_MODE_HI,
|
|
GP2AP020A00F_FLAG_DATA_READY,
|
|
};
|
|
|
|
enum gp2ap020a00f_thresh_val_id {
|
|
GP2AP020A00F_THRESH_TL,
|
|
GP2AP020A00F_THRESH_TH,
|
|
GP2AP020A00F_THRESH_PL,
|
|
GP2AP020A00F_THRESH_PH,
|
|
};
|
|
|
|
struct gp2ap020a00f_data {
|
|
const struct gp2ap020a00f_platform_data *pdata;
|
|
struct i2c_client *client;
|
|
struct mutex lock;
|
|
char *buffer;
|
|
struct regulator *vled_reg;
|
|
unsigned long flags;
|
|
enum gp2ap020a00f_opmode cur_opmode;
|
|
struct iio_trigger *trig;
|
|
struct regmap *regmap;
|
|
unsigned int thresh_val[4];
|
|
u8 debug_reg_addr;
|
|
struct irq_work work;
|
|
wait_queue_head_t data_ready_queue;
|
|
};
|
|
|
|
static const u8 gp2ap020a00f_reg_init_tab[] = {
|
|
[GP2AP020A00F_OP_REG] = GP2AP020A00F_OP3_SHUTDOWN,
|
|
[GP2AP020A00F_ALS_REG] = GP2AP020A00F_RES_A_25ms |
|
|
GP2AP020A00F_RANGE_A_x8,
|
|
[GP2AP020A00F_PS_REG] = GP2AP020A00F_ALC_ON |
|
|
GP2AP020A00F_RES_P_1_56ms_x2 |
|
|
GP2AP020A00F_RANGE_P_x4,
|
|
[GP2AP020A00F_LED_REG] = GP2AP020A00F_INTVAL_0 |
|
|
GP2AP020A00F_IS_110mA |
|
|
GP2AP020A00F_FREQ_327_5kHz,
|
|
[GP2AP020A00F_TL_L_REG] = 0,
|
|
[GP2AP020A00F_TL_H_REG] = 0,
|
|
[GP2AP020A00F_TH_L_REG] = 0,
|
|
[GP2AP020A00F_TH_H_REG] = 0,
|
|
[GP2AP020A00F_PL_L_REG] = 0,
|
|
[GP2AP020A00F_PL_H_REG] = 0,
|
|
[GP2AP020A00F_PH_L_REG] = 0,
|
|
[GP2AP020A00F_PH_H_REG] = 0,
|
|
};
|
|
|
|
static bool gp2ap020a00f_is_volatile_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case GP2AP020A00F_OP_REG:
|
|
case GP2AP020A00F_D0_L_REG:
|
|
case GP2AP020A00F_D0_H_REG:
|
|
case GP2AP020A00F_D1_L_REG:
|
|
case GP2AP020A00F_D1_H_REG:
|
|
case GP2AP020A00F_D2_L_REG:
|
|
case GP2AP020A00F_D2_H_REG:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static const struct regmap_config gp2ap020a00f_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
|
|
.max_register = GP2AP020A00F_D2_H_REG,
|
|
.cache_type = REGCACHE_RBTREE,
|
|
|
|
.volatile_reg = gp2ap020a00f_is_volatile_reg,
|
|
};
|
|
|
|
static const struct gp2ap020a00f_mutable_config_regs {
|
|
u8 op_reg;
|
|
u8 als_reg;
|
|
u8 ps_reg;
|
|
u8 led_reg;
|
|
} opmode_regs_settings[GP2AP020A00F_NUM_OPMODES] = {
|
|
[GP2AP020A00F_OPMODE_READ_RAW_CLEAR] = {
|
|
GP2AP020A00F_OP_ALS | GP2AP020A00F_OP2_CONT_OPERATION
|
|
| GP2AP020A00F_OP3_OPERATION
|
|
| GP2AP020A00F_TYPE_AUTO_CALC,
|
|
GP2AP020A00F_PRST_ONCE,
|
|
GP2AP020A00F_INTTYPE_LEVEL,
|
|
GP2AP020A00F_PIN_ALS
|
|
},
|
|
[GP2AP020A00F_OPMODE_READ_RAW_IR] = {
|
|
GP2AP020A00F_OP_ALS | GP2AP020A00F_OP2_CONT_OPERATION
|
|
| GP2AP020A00F_OP3_OPERATION
|
|
| GP2AP020A00F_TYPE_MANUAL_CALC,
|
|
GP2AP020A00F_PRST_ONCE,
|
|
GP2AP020A00F_INTTYPE_LEVEL,
|
|
GP2AP020A00F_PIN_ALS
|
|
},
|
|
[GP2AP020A00F_OPMODE_READ_RAW_PROXIMITY] = {
|
|
GP2AP020A00F_OP_PS | GP2AP020A00F_OP2_CONT_OPERATION
|
|
| GP2AP020A00F_OP3_OPERATION
|
|
| GP2AP020A00F_TYPE_MANUAL_CALC,
|
|
GP2AP020A00F_PRST_ONCE,
|
|
GP2AP020A00F_INTTYPE_LEVEL,
|
|
GP2AP020A00F_PIN_PS
|
|
},
|
|
[GP2AP020A00F_OPMODE_PROX_DETECT] = {
|
|
GP2AP020A00F_OP_PS | GP2AP020A00F_OP2_CONT_OPERATION
|
|
| GP2AP020A00F_OP3_OPERATION
|
|
| GP2AP020A00F_TYPE_MANUAL_CALC,
|
|
GP2AP020A00F_PRST_4_CYCLES,
|
|
GP2AP020A00F_INTTYPE_PULSE,
|
|
GP2AP020A00F_PIN_PS_DETECT
|
|
},
|
|
[GP2AP020A00F_OPMODE_ALS] = {
|
|
GP2AP020A00F_OP_ALS | GP2AP020A00F_OP2_CONT_OPERATION
|
|
| GP2AP020A00F_OP3_OPERATION
|
|
| GP2AP020A00F_TYPE_AUTO_CALC,
|
|
GP2AP020A00F_PRST_ONCE,
|
|
GP2AP020A00F_INTTYPE_LEVEL,
|
|
GP2AP020A00F_PIN_ALS
|
|
},
|
|
[GP2AP020A00F_OPMODE_PS] = {
|
|
GP2AP020A00F_OP_PS | GP2AP020A00F_OP2_CONT_OPERATION
|
|
| GP2AP020A00F_OP3_OPERATION
|
|
| GP2AP020A00F_TYPE_MANUAL_CALC,
|
|
GP2AP020A00F_PRST_4_CYCLES,
|
|
GP2AP020A00F_INTTYPE_LEVEL,
|
|
GP2AP020A00F_PIN_PS
|
|
},
|
|
[GP2AP020A00F_OPMODE_ALS_AND_PS] = {
|
|
GP2AP020A00F_OP_ALS_AND_PS
|
|
| GP2AP020A00F_OP2_CONT_OPERATION
|
|
| GP2AP020A00F_OP3_OPERATION
|
|
| GP2AP020A00F_TYPE_AUTO_CALC,
|
|
GP2AP020A00F_PRST_4_CYCLES,
|
|
GP2AP020A00F_INTTYPE_LEVEL,
|
|
GP2AP020A00F_PIN_ALS_OR_PS
|
|
},
|
|
[GP2AP020A00F_OPMODE_SHUTDOWN] = { GP2AP020A00F_OP3_SHUTDOWN, },
|
|
};
|
|
|
|
static int gp2ap020a00f_set_operation_mode(struct gp2ap020a00f_data *data,
|
|
enum gp2ap020a00f_opmode op)
|
|
{
|
|
unsigned int op_reg_val;
|
|
int err;
|
|
|
|
if (op != GP2AP020A00F_OPMODE_SHUTDOWN) {
|
|
err = regmap_read(data->regmap, GP2AP020A00F_OP_REG,
|
|
&op_reg_val);
|
|
if (err < 0)
|
|
return err;
|
|
/*
|
|
* Shutdown the device if the operation being executed entails
|
|
* mode transition.
|
|
*/
|
|
if ((opmode_regs_settings[op].op_reg & GP2AP020A00F_OP_MASK) !=
|
|
(op_reg_val & GP2AP020A00F_OP_MASK)) {
|
|
/* set shutdown mode */
|
|
err = regmap_update_bits(data->regmap,
|
|
GP2AP020A00F_OP_REG, GP2AP020A00F_OP3_MASK,
|
|
GP2AP020A00F_OP3_SHUTDOWN);
|
|
if (err < 0)
|
|
return err;
|
|
}
|
|
|
|
err = regmap_update_bits(data->regmap, GP2AP020A00F_ALS_REG,
|
|
GP2AP020A00F_PRST_MASK, opmode_regs_settings[op]
|
|
.als_reg);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
err = regmap_update_bits(data->regmap, GP2AP020A00F_PS_REG,
|
|
GP2AP020A00F_INTTYPE_MASK, opmode_regs_settings[op]
|
|
.ps_reg);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
err = regmap_update_bits(data->regmap, GP2AP020A00F_LED_REG,
|
|
GP2AP020A00F_PIN_MASK, opmode_regs_settings[op]
|
|
.led_reg);
|
|
if (err < 0)
|
|
return err;
|
|
}
|
|
|
|
/* Set OP_REG and apply operation mode (power on / off) */
|
|
err = regmap_update_bits(data->regmap,
|
|
GP2AP020A00F_OP_REG,
|
|
GP2AP020A00F_OP_MASK | GP2AP020A00F_OP2_MASK |
|
|
GP2AP020A00F_OP3_MASK | GP2AP020A00F_TYPE_MASK,
|
|
opmode_regs_settings[op].op_reg);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
data->cur_opmode = op;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static bool gp2ap020a00f_als_enabled(struct gp2ap020a00f_data *data)
|
|
{
|
|
return test_bit(GP2AP020A00F_FLAG_ALS_CLEAR_TRIGGER, &data->flags) ||
|
|
test_bit(GP2AP020A00F_FLAG_ALS_IR_TRIGGER, &data->flags) ||
|
|
test_bit(GP2AP020A00F_FLAG_ALS_RISING_EV, &data->flags) ||
|
|
test_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV, &data->flags);
|
|
}
|
|
|
|
static bool gp2ap020a00f_prox_detect_enabled(struct gp2ap020a00f_data *data)
|
|
{
|
|
return test_bit(GP2AP020A00F_FLAG_PROX_RISING_EV, &data->flags) ||
|
|
test_bit(GP2AP020A00F_FLAG_PROX_FALLING_EV, &data->flags);
|
|
}
|
|
|
|
static int gp2ap020a00f_write_event_threshold(struct gp2ap020a00f_data *data,
|
|
enum gp2ap020a00f_thresh_val_id th_val_id,
|
|
bool enable)
|
|
{
|
|
__le16 thresh_buf = 0;
|
|
unsigned int thresh_reg_val;
|
|
|
|
if (!enable)
|
|
thresh_reg_val = 0;
|
|
else if (test_bit(GP2AP020A00F_FLAG_LUX_MODE_HI, &data->flags) &&
|
|
th_val_id != GP2AP020A00F_THRESH_PL &&
|
|
th_val_id != GP2AP020A00F_THRESH_PH)
|
|
/*
|
|
* For the high lux mode ALS threshold has to be scaled down
|
|
* to allow for proper comparison with the output value.
|
|
*/
|
|
thresh_reg_val = data->thresh_val[th_val_id] / 16;
|
|
else
|
|
thresh_reg_val = data->thresh_val[th_val_id] > 16000 ?
|
|
16000 :
|
|
data->thresh_val[th_val_id];
|
|
|
|
thresh_buf = cpu_to_le16(thresh_reg_val);
|
|
|
|
return regmap_bulk_write(data->regmap,
|
|
GP2AP020A00F_THRESH_REG(th_val_id),
|
|
(u8 *)&thresh_buf, 2);
|
|
}
|
|
|
|
static int gp2ap020a00f_alter_opmode(struct gp2ap020a00f_data *data,
|
|
enum gp2ap020a00f_opmode diff_mode, int add_sub)
|
|
{
|
|
enum gp2ap020a00f_opmode new_mode;
|
|
|
|
if (diff_mode != GP2AP020A00F_OPMODE_ALS &&
|
|
diff_mode != GP2AP020A00F_OPMODE_PS)
|
|
return -EINVAL;
|
|
|
|
if (add_sub == GP2AP020A00F_ADD_MODE) {
|
|
if (data->cur_opmode == GP2AP020A00F_OPMODE_SHUTDOWN)
|
|
new_mode = diff_mode;
|
|
else
|
|
new_mode = GP2AP020A00F_OPMODE_ALS_AND_PS;
|
|
} else {
|
|
if (data->cur_opmode == GP2AP020A00F_OPMODE_ALS_AND_PS)
|
|
new_mode = (diff_mode == GP2AP020A00F_OPMODE_ALS) ?
|
|
GP2AP020A00F_OPMODE_PS :
|
|
GP2AP020A00F_OPMODE_ALS;
|
|
else
|
|
new_mode = GP2AP020A00F_OPMODE_SHUTDOWN;
|
|
}
|
|
|
|
return gp2ap020a00f_set_operation_mode(data, new_mode);
|
|
}
|
|
|
|
static int gp2ap020a00f_exec_cmd(struct gp2ap020a00f_data *data,
|
|
enum gp2ap020a00f_cmd cmd)
|
|
{
|
|
int err = 0;
|
|
|
|
switch (cmd) {
|
|
case GP2AP020A00F_CMD_READ_RAW_CLEAR:
|
|
if (data->cur_opmode != GP2AP020A00F_OPMODE_SHUTDOWN)
|
|
return -EBUSY;
|
|
err = gp2ap020a00f_set_operation_mode(data,
|
|
GP2AP020A00F_OPMODE_READ_RAW_CLEAR);
|
|
break;
|
|
case GP2AP020A00F_CMD_READ_RAW_IR:
|
|
if (data->cur_opmode != GP2AP020A00F_OPMODE_SHUTDOWN)
|
|
return -EBUSY;
|
|
err = gp2ap020a00f_set_operation_mode(data,
|
|
GP2AP020A00F_OPMODE_READ_RAW_IR);
|
|
break;
|
|
case GP2AP020A00F_CMD_READ_RAW_PROXIMITY:
|
|
if (data->cur_opmode != GP2AP020A00F_OPMODE_SHUTDOWN)
|
|
return -EBUSY;
|
|
err = gp2ap020a00f_set_operation_mode(data,
|
|
GP2AP020A00F_OPMODE_READ_RAW_PROXIMITY);
|
|
break;
|
|
case GP2AP020A00F_CMD_TRIGGER_CLEAR_EN:
|
|
if (data->cur_opmode == GP2AP020A00F_OPMODE_PROX_DETECT)
|
|
return -EBUSY;
|
|
if (!gp2ap020a00f_als_enabled(data))
|
|
err = gp2ap020a00f_alter_opmode(data,
|
|
GP2AP020A00F_OPMODE_ALS,
|
|
GP2AP020A00F_ADD_MODE);
|
|
set_bit(GP2AP020A00F_FLAG_ALS_CLEAR_TRIGGER, &data->flags);
|
|
break;
|
|
case GP2AP020A00F_CMD_TRIGGER_CLEAR_DIS:
|
|
clear_bit(GP2AP020A00F_FLAG_ALS_CLEAR_TRIGGER, &data->flags);
|
|
if (gp2ap020a00f_als_enabled(data))
|
|
break;
|
|
err = gp2ap020a00f_alter_opmode(data,
|
|
GP2AP020A00F_OPMODE_ALS,
|
|
GP2AP020A00F_SUBTRACT_MODE);
|
|
break;
|
|
case GP2AP020A00F_CMD_TRIGGER_IR_EN:
|
|
if (data->cur_opmode == GP2AP020A00F_OPMODE_PROX_DETECT)
|
|
return -EBUSY;
|
|
if (!gp2ap020a00f_als_enabled(data))
|
|
err = gp2ap020a00f_alter_opmode(data,
|
|
GP2AP020A00F_OPMODE_ALS,
|
|
GP2AP020A00F_ADD_MODE);
|
|
set_bit(GP2AP020A00F_FLAG_ALS_IR_TRIGGER, &data->flags);
|
|
break;
|
|
case GP2AP020A00F_CMD_TRIGGER_IR_DIS:
|
|
clear_bit(GP2AP020A00F_FLAG_ALS_IR_TRIGGER, &data->flags);
|
|
if (gp2ap020a00f_als_enabled(data))
|
|
break;
|
|
err = gp2ap020a00f_alter_opmode(data,
|
|
GP2AP020A00F_OPMODE_ALS,
|
|
GP2AP020A00F_SUBTRACT_MODE);
|
|
break;
|
|
case GP2AP020A00F_CMD_TRIGGER_PROX_EN:
|
|
if (data->cur_opmode == GP2AP020A00F_OPMODE_PROX_DETECT)
|
|
return -EBUSY;
|
|
err = gp2ap020a00f_alter_opmode(data,
|
|
GP2AP020A00F_OPMODE_PS,
|
|
GP2AP020A00F_ADD_MODE);
|
|
set_bit(GP2AP020A00F_FLAG_PROX_TRIGGER, &data->flags);
|
|
break;
|
|
case GP2AP020A00F_CMD_TRIGGER_PROX_DIS:
|
|
clear_bit(GP2AP020A00F_FLAG_PROX_TRIGGER, &data->flags);
|
|
err = gp2ap020a00f_alter_opmode(data,
|
|
GP2AP020A00F_OPMODE_PS,
|
|
GP2AP020A00F_SUBTRACT_MODE);
|
|
break;
|
|
case GP2AP020A00F_CMD_ALS_HIGH_EV_EN:
|
|
if (test_bit(GP2AP020A00F_FLAG_ALS_RISING_EV, &data->flags))
|
|
return 0;
|
|
if (data->cur_opmode == GP2AP020A00F_OPMODE_PROX_DETECT)
|
|
return -EBUSY;
|
|
if (!gp2ap020a00f_als_enabled(data)) {
|
|
err = gp2ap020a00f_alter_opmode(data,
|
|
GP2AP020A00F_OPMODE_ALS,
|
|
GP2AP020A00F_ADD_MODE);
|
|
if (err < 0)
|
|
return err;
|
|
}
|
|
set_bit(GP2AP020A00F_FLAG_ALS_RISING_EV, &data->flags);
|
|
err = gp2ap020a00f_write_event_threshold(data,
|
|
GP2AP020A00F_THRESH_TH, true);
|
|
break;
|
|
case GP2AP020A00F_CMD_ALS_HIGH_EV_DIS:
|
|
if (!test_bit(GP2AP020A00F_FLAG_ALS_RISING_EV, &data->flags))
|
|
return 0;
|
|
clear_bit(GP2AP020A00F_FLAG_ALS_RISING_EV, &data->flags);
|
|
if (!gp2ap020a00f_als_enabled(data)) {
|
|
err = gp2ap020a00f_alter_opmode(data,
|
|
GP2AP020A00F_OPMODE_ALS,
|
|
GP2AP020A00F_SUBTRACT_MODE);
|
|
if (err < 0)
|
|
return err;
|
|
}
|
|
err = gp2ap020a00f_write_event_threshold(data,
|
|
GP2AP020A00F_THRESH_TH, false);
|
|
break;
|
|
case GP2AP020A00F_CMD_ALS_LOW_EV_EN:
|
|
if (test_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV, &data->flags))
|
|
return 0;
|
|
if (data->cur_opmode == GP2AP020A00F_OPMODE_PROX_DETECT)
|
|
return -EBUSY;
|
|
if (!gp2ap020a00f_als_enabled(data)) {
|
|
err = gp2ap020a00f_alter_opmode(data,
|
|
GP2AP020A00F_OPMODE_ALS,
|
|
GP2AP020A00F_ADD_MODE);
|
|
if (err < 0)
|
|
return err;
|
|
}
|
|
set_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV, &data->flags);
|
|
err = gp2ap020a00f_write_event_threshold(data,
|
|
GP2AP020A00F_THRESH_TL, true);
|
|
break;
|
|
case GP2AP020A00F_CMD_ALS_LOW_EV_DIS:
|
|
if (!test_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV, &data->flags))
|
|
return 0;
|
|
clear_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV, &data->flags);
|
|
if (!gp2ap020a00f_als_enabled(data)) {
|
|
err = gp2ap020a00f_alter_opmode(data,
|
|
GP2AP020A00F_OPMODE_ALS,
|
|
GP2AP020A00F_SUBTRACT_MODE);
|
|
if (err < 0)
|
|
return err;
|
|
}
|
|
err = gp2ap020a00f_write_event_threshold(data,
|
|
GP2AP020A00F_THRESH_TL, false);
|
|
break;
|
|
case GP2AP020A00F_CMD_PROX_HIGH_EV_EN:
|
|
if (test_bit(GP2AP020A00F_FLAG_PROX_RISING_EV, &data->flags))
|
|
return 0;
|
|
if (gp2ap020a00f_als_enabled(data) ||
|
|
data->cur_opmode == GP2AP020A00F_OPMODE_PS)
|
|
return -EBUSY;
|
|
if (!gp2ap020a00f_prox_detect_enabled(data)) {
|
|
err = gp2ap020a00f_set_operation_mode(data,
|
|
GP2AP020A00F_OPMODE_PROX_DETECT);
|
|
if (err < 0)
|
|
return err;
|
|
}
|
|
set_bit(GP2AP020A00F_FLAG_PROX_RISING_EV, &data->flags);
|
|
err = gp2ap020a00f_write_event_threshold(data,
|
|
GP2AP020A00F_THRESH_PH, true);
|
|
break;
|
|
case GP2AP020A00F_CMD_PROX_HIGH_EV_DIS:
|
|
if (!test_bit(GP2AP020A00F_FLAG_PROX_RISING_EV, &data->flags))
|
|
return 0;
|
|
clear_bit(GP2AP020A00F_FLAG_PROX_RISING_EV, &data->flags);
|
|
err = gp2ap020a00f_set_operation_mode(data,
|
|
GP2AP020A00F_OPMODE_SHUTDOWN);
|
|
if (err < 0)
|
|
return err;
|
|
err = gp2ap020a00f_write_event_threshold(data,
|
|
GP2AP020A00F_THRESH_PH, false);
|
|
break;
|
|
case GP2AP020A00F_CMD_PROX_LOW_EV_EN:
|
|
if (test_bit(GP2AP020A00F_FLAG_PROX_FALLING_EV, &data->flags))
|
|
return 0;
|
|
if (gp2ap020a00f_als_enabled(data) ||
|
|
data->cur_opmode == GP2AP020A00F_OPMODE_PS)
|
|
return -EBUSY;
|
|
if (!gp2ap020a00f_prox_detect_enabled(data)) {
|
|
err = gp2ap020a00f_set_operation_mode(data,
|
|
GP2AP020A00F_OPMODE_PROX_DETECT);
|
|
if (err < 0)
|
|
return err;
|
|
}
|
|
set_bit(GP2AP020A00F_FLAG_PROX_FALLING_EV, &data->flags);
|
|
err = gp2ap020a00f_write_event_threshold(data,
|
|
GP2AP020A00F_THRESH_PL, true);
|
|
break;
|
|
case GP2AP020A00F_CMD_PROX_LOW_EV_DIS:
|
|
if (!test_bit(GP2AP020A00F_FLAG_PROX_FALLING_EV, &data->flags))
|
|
return 0;
|
|
clear_bit(GP2AP020A00F_FLAG_PROX_FALLING_EV, &data->flags);
|
|
err = gp2ap020a00f_set_operation_mode(data,
|
|
GP2AP020A00F_OPMODE_SHUTDOWN);
|
|
if (err < 0)
|
|
return err;
|
|
err = gp2ap020a00f_write_event_threshold(data,
|
|
GP2AP020A00F_THRESH_PL, false);
|
|
break;
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static int wait_conversion_complete_irq(struct gp2ap020a00f_data *data)
|
|
{
|
|
int ret;
|
|
|
|
ret = wait_event_timeout(data->data_ready_queue,
|
|
test_bit(GP2AP020A00F_FLAG_DATA_READY,
|
|
&data->flags),
|
|
GP2AP020A00F_DATA_READY_TIMEOUT);
|
|
clear_bit(GP2AP020A00F_FLAG_DATA_READY, &data->flags);
|
|
|
|
return ret > 0 ? 0 : -ETIME;
|
|
}
|
|
|
|
static int gp2ap020a00f_read_output(struct gp2ap020a00f_data *data,
|
|
unsigned int output_reg, int *val)
|
|
{
|
|
u8 reg_buf[2];
|
|
int err;
|
|
|
|
err = wait_conversion_complete_irq(data);
|
|
if (err < 0)
|
|
dev_dbg(&data->client->dev, "data ready timeout\n");
|
|
|
|
err = regmap_bulk_read(data->regmap, output_reg, reg_buf, 2);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
*val = le16_to_cpup((__le16 *)reg_buf);
|
|
|
|
return err;
|
|
}
|
|
|
|
static bool gp2ap020a00f_adjust_lux_mode(struct gp2ap020a00f_data *data,
|
|
int output_val)
|
|
{
|
|
u8 new_range = 0xff;
|
|
int err;
|
|
|
|
if (!test_bit(GP2AP020A00F_FLAG_LUX_MODE_HI, &data->flags)) {
|
|
if (output_val > 16000) {
|
|
set_bit(GP2AP020A00F_FLAG_LUX_MODE_HI, &data->flags);
|
|
new_range = GP2AP020A00F_RANGE_A_x128;
|
|
}
|
|
} else {
|
|
if (output_val < 1000) {
|
|
clear_bit(GP2AP020A00F_FLAG_LUX_MODE_HI, &data->flags);
|
|
new_range = GP2AP020A00F_RANGE_A_x8;
|
|
}
|
|
}
|
|
|
|
if (new_range != 0xff) {
|
|
/* Clear als threshold registers to avoid spurious
|
|
* events caused by lux mode transition.
|
|
*/
|
|
err = gp2ap020a00f_write_event_threshold(data,
|
|
GP2AP020A00F_THRESH_TH, false);
|
|
if (err < 0) {
|
|
dev_err(&data->client->dev,
|
|
"Clearing als threshold register failed.\n");
|
|
return false;
|
|
}
|
|
|
|
err = gp2ap020a00f_write_event_threshold(data,
|
|
GP2AP020A00F_THRESH_TL, false);
|
|
if (err < 0) {
|
|
dev_err(&data->client->dev,
|
|
"Clearing als threshold register failed.\n");
|
|
return false;
|
|
}
|
|
|
|
/* Change lux mode */
|
|
err = regmap_update_bits(data->regmap,
|
|
GP2AP020A00F_OP_REG,
|
|
GP2AP020A00F_OP3_MASK,
|
|
GP2AP020A00F_OP3_SHUTDOWN);
|
|
|
|
if (err < 0) {
|
|
dev_err(&data->client->dev,
|
|
"Shutting down the device failed.\n");
|
|
return false;
|
|
}
|
|
|
|
err = regmap_update_bits(data->regmap,
|
|
GP2AP020A00F_ALS_REG,
|
|
GP2AP020A00F_RANGE_A_MASK,
|
|
new_range);
|
|
|
|
if (err < 0) {
|
|
dev_err(&data->client->dev,
|
|
"Adjusting device lux mode failed.\n");
|
|
return false;
|
|
}
|
|
|
|
err = regmap_update_bits(data->regmap,
|
|
GP2AP020A00F_OP_REG,
|
|
GP2AP020A00F_OP3_MASK,
|
|
GP2AP020A00F_OP3_OPERATION);
|
|
|
|
if (err < 0) {
|
|
dev_err(&data->client->dev,
|
|
"Powering up the device failed.\n");
|
|
return false;
|
|
}
|
|
|
|
/* Adjust als threshold register values to the new lux mode */
|
|
if (test_bit(GP2AP020A00F_FLAG_ALS_RISING_EV, &data->flags)) {
|
|
err = gp2ap020a00f_write_event_threshold(data,
|
|
GP2AP020A00F_THRESH_TH, true);
|
|
if (err < 0) {
|
|
dev_err(&data->client->dev,
|
|
"Adjusting als threshold value failed.\n");
|
|
return false;
|
|
}
|
|
}
|
|
|
|
if (test_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV, &data->flags)) {
|
|
err = gp2ap020a00f_write_event_threshold(data,
|
|
GP2AP020A00F_THRESH_TL, true);
|
|
if (err < 0) {
|
|
dev_err(&data->client->dev,
|
|
"Adjusting als threshold value failed.\n");
|
|
return false;
|
|
}
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
static void gp2ap020a00f_output_to_lux(struct gp2ap020a00f_data *data,
|
|
int *output_val)
|
|
{
|
|
if (test_bit(GP2AP020A00F_FLAG_LUX_MODE_HI, &data->flags))
|
|
*output_val *= 16;
|
|
}
|
|
|
|
static void gp2ap020a00f_iio_trigger_work(struct irq_work *work)
|
|
{
|
|
struct gp2ap020a00f_data *data =
|
|
container_of(work, struct gp2ap020a00f_data, work);
|
|
|
|
iio_trigger_poll(data->trig);
|
|
}
|
|
|
|
static irqreturn_t gp2ap020a00f_prox_sensing_handler(int irq, void *data)
|
|
{
|
|
struct iio_dev *indio_dev = data;
|
|
struct gp2ap020a00f_data *priv = iio_priv(indio_dev);
|
|
unsigned int op_reg_val;
|
|
int ret;
|
|
|
|
/* Read interrupt flags */
|
|
ret = regmap_read(priv->regmap, GP2AP020A00F_OP_REG, &op_reg_val);
|
|
if (ret < 0)
|
|
return IRQ_HANDLED;
|
|
|
|
if (gp2ap020a00f_prox_detect_enabled(priv)) {
|
|
if (op_reg_val & GP2AP020A00F_PROX_DETECT) {
|
|
iio_push_event(indio_dev,
|
|
IIO_UNMOD_EVENT_CODE(
|
|
IIO_PROXIMITY,
|
|
GP2AP020A00F_SCAN_MODE_PROXIMITY,
|
|
IIO_EV_TYPE_ROC,
|
|
IIO_EV_DIR_RISING),
|
|
iio_get_time_ns(indio_dev));
|
|
} else {
|
|
iio_push_event(indio_dev,
|
|
IIO_UNMOD_EVENT_CODE(
|
|
IIO_PROXIMITY,
|
|
GP2AP020A00F_SCAN_MODE_PROXIMITY,
|
|
IIO_EV_TYPE_ROC,
|
|
IIO_EV_DIR_FALLING),
|
|
iio_get_time_ns(indio_dev));
|
|
}
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t gp2ap020a00f_thresh_event_handler(int irq, void *data)
|
|
{
|
|
struct iio_dev *indio_dev = data;
|
|
struct gp2ap020a00f_data *priv = iio_priv(indio_dev);
|
|
u8 op_reg_flags, d0_reg_buf[2];
|
|
unsigned int output_val, op_reg_val;
|
|
int thresh_val_id, ret;
|
|
|
|
/* Read interrupt flags */
|
|
ret = regmap_read(priv->regmap, GP2AP020A00F_OP_REG,
|
|
&op_reg_val);
|
|
if (ret < 0)
|
|
goto done;
|
|
|
|
op_reg_flags = op_reg_val & (GP2AP020A00F_FLAG_A | GP2AP020A00F_FLAG_P
|
|
| GP2AP020A00F_PROX_DETECT);
|
|
|
|
op_reg_val &= (~GP2AP020A00F_FLAG_A & ~GP2AP020A00F_FLAG_P
|
|
& ~GP2AP020A00F_PROX_DETECT);
|
|
|
|
/* Clear interrupt flags (if not in INTTYPE_PULSE mode) */
|
|
if (priv->cur_opmode != GP2AP020A00F_OPMODE_PROX_DETECT) {
|
|
ret = regmap_write(priv->regmap, GP2AP020A00F_OP_REG,
|
|
op_reg_val);
|
|
if (ret < 0)
|
|
goto done;
|
|
}
|
|
|
|
if (op_reg_flags & GP2AP020A00F_FLAG_A) {
|
|
/* Check D0 register to assess if the lux mode
|
|
* transition is required.
|
|
*/
|
|
ret = regmap_bulk_read(priv->regmap, GP2AP020A00F_D0_L_REG,
|
|
d0_reg_buf, 2);
|
|
if (ret < 0)
|
|
goto done;
|
|
|
|
output_val = le16_to_cpup((__le16 *)d0_reg_buf);
|
|
|
|
if (gp2ap020a00f_adjust_lux_mode(priv, output_val))
|
|
goto done;
|
|
|
|
gp2ap020a00f_output_to_lux(priv, &output_val);
|
|
|
|
/*
|
|
* We need to check output value to distinguish
|
|
* between high and low ambient light threshold event.
|
|
*/
|
|
if (test_bit(GP2AP020A00F_FLAG_ALS_RISING_EV, &priv->flags)) {
|
|
thresh_val_id =
|
|
GP2AP020A00F_THRESH_VAL_ID(GP2AP020A00F_TH_L_REG);
|
|
if (output_val > priv->thresh_val[thresh_val_id])
|
|
iio_push_event(indio_dev,
|
|
IIO_MOD_EVENT_CODE(
|
|
IIO_LIGHT,
|
|
GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR,
|
|
IIO_MOD_LIGHT_CLEAR,
|
|
IIO_EV_TYPE_THRESH,
|
|
IIO_EV_DIR_RISING),
|
|
iio_get_time_ns(indio_dev));
|
|
}
|
|
|
|
if (test_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV, &priv->flags)) {
|
|
thresh_val_id =
|
|
GP2AP020A00F_THRESH_VAL_ID(GP2AP020A00F_TL_L_REG);
|
|
if (output_val < priv->thresh_val[thresh_val_id])
|
|
iio_push_event(indio_dev,
|
|
IIO_MOD_EVENT_CODE(
|
|
IIO_LIGHT,
|
|
GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR,
|
|
IIO_MOD_LIGHT_CLEAR,
|
|
IIO_EV_TYPE_THRESH,
|
|
IIO_EV_DIR_FALLING),
|
|
iio_get_time_ns(indio_dev));
|
|
}
|
|
}
|
|
|
|
if (priv->cur_opmode == GP2AP020A00F_OPMODE_READ_RAW_CLEAR ||
|
|
priv->cur_opmode == GP2AP020A00F_OPMODE_READ_RAW_IR ||
|
|
priv->cur_opmode == GP2AP020A00F_OPMODE_READ_RAW_PROXIMITY) {
|
|
set_bit(GP2AP020A00F_FLAG_DATA_READY, &priv->flags);
|
|
wake_up(&priv->data_ready_queue);
|
|
goto done;
|
|
}
|
|
|
|
if (test_bit(GP2AP020A00F_FLAG_ALS_CLEAR_TRIGGER, &priv->flags) ||
|
|
test_bit(GP2AP020A00F_FLAG_ALS_IR_TRIGGER, &priv->flags) ||
|
|
test_bit(GP2AP020A00F_FLAG_PROX_TRIGGER, &priv->flags))
|
|
/* This fires off the trigger. */
|
|
irq_work_queue(&priv->work);
|
|
|
|
done:
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t gp2ap020a00f_trigger_handler(int irq, void *data)
|
|
{
|
|
struct iio_poll_func *pf = data;
|
|
struct iio_dev *indio_dev = pf->indio_dev;
|
|
struct gp2ap020a00f_data *priv = iio_priv(indio_dev);
|
|
size_t d_size = 0;
|
|
int i, out_val, ret;
|
|
|
|
for_each_set_bit(i, indio_dev->active_scan_mask,
|
|
indio_dev->masklength) {
|
|
ret = regmap_bulk_read(priv->regmap,
|
|
GP2AP020A00F_DATA_REG(i),
|
|
&priv->buffer[d_size], 2);
|
|
if (ret < 0)
|
|
goto done;
|
|
|
|
if (i == GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR ||
|
|
i == GP2AP020A00F_SCAN_MODE_LIGHT_IR) {
|
|
out_val = le16_to_cpup((__le16 *)&priv->buffer[d_size]);
|
|
gp2ap020a00f_output_to_lux(priv, &out_val);
|
|
|
|
put_unaligned_le32(out_val, &priv->buffer[d_size]);
|
|
d_size += 4;
|
|
} else {
|
|
d_size += 2;
|
|
}
|
|
}
|
|
|
|
iio_push_to_buffers_with_timestamp(indio_dev, priv->buffer,
|
|
pf->timestamp);
|
|
done:
|
|
iio_trigger_notify_done(indio_dev->trig);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static u8 gp2ap020a00f_get_thresh_reg(const struct iio_chan_spec *chan,
|
|
enum iio_event_direction event_dir)
|
|
{
|
|
switch (chan->type) {
|
|
case IIO_PROXIMITY:
|
|
if (event_dir == IIO_EV_DIR_RISING)
|
|
return GP2AP020A00F_PH_L_REG;
|
|
else
|
|
return GP2AP020A00F_PL_L_REG;
|
|
case IIO_LIGHT:
|
|
if (event_dir == IIO_EV_DIR_RISING)
|
|
return GP2AP020A00F_TH_L_REG;
|
|
else
|
|
return GP2AP020A00F_TL_L_REG;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int gp2ap020a00f_write_event_val(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan,
|
|
enum iio_event_type type,
|
|
enum iio_event_direction dir,
|
|
enum iio_event_info info,
|
|
int val, int val2)
|
|
{
|
|
struct gp2ap020a00f_data *data = iio_priv(indio_dev);
|
|
bool event_en = false;
|
|
u8 thresh_val_id;
|
|
u8 thresh_reg_l;
|
|
int err = 0;
|
|
|
|
mutex_lock(&data->lock);
|
|
|
|
thresh_reg_l = gp2ap020a00f_get_thresh_reg(chan, dir);
|
|
thresh_val_id = GP2AP020A00F_THRESH_VAL_ID(thresh_reg_l);
|
|
|
|
if (thresh_val_id > GP2AP020A00F_THRESH_PH) {
|
|
err = -EINVAL;
|
|
goto error_unlock;
|
|
}
|
|
|
|
switch (thresh_reg_l) {
|
|
case GP2AP020A00F_TH_L_REG:
|
|
event_en = test_bit(GP2AP020A00F_FLAG_ALS_RISING_EV,
|
|
&data->flags);
|
|
break;
|
|
case GP2AP020A00F_TL_L_REG:
|
|
event_en = test_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV,
|
|
&data->flags);
|
|
break;
|
|
case GP2AP020A00F_PH_L_REG:
|
|
if (val == 0) {
|
|
err = -EINVAL;
|
|
goto error_unlock;
|
|
}
|
|
event_en = test_bit(GP2AP020A00F_FLAG_PROX_RISING_EV,
|
|
&data->flags);
|
|
break;
|
|
case GP2AP020A00F_PL_L_REG:
|
|
if (val == 0) {
|
|
err = -EINVAL;
|
|
goto error_unlock;
|
|
}
|
|
event_en = test_bit(GP2AP020A00F_FLAG_PROX_FALLING_EV,
|
|
&data->flags);
|
|
break;
|
|
}
|
|
|
|
data->thresh_val[thresh_val_id] = val;
|
|
err = gp2ap020a00f_write_event_threshold(data, thresh_val_id,
|
|
event_en);
|
|
error_unlock:
|
|
mutex_unlock(&data->lock);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int gp2ap020a00f_read_event_val(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan,
|
|
enum iio_event_type type,
|
|
enum iio_event_direction dir,
|
|
enum iio_event_info info,
|
|
int *val, int *val2)
|
|
{
|
|
struct gp2ap020a00f_data *data = iio_priv(indio_dev);
|
|
u8 thresh_reg_l;
|
|
int err = IIO_VAL_INT;
|
|
|
|
mutex_lock(&data->lock);
|
|
|
|
thresh_reg_l = gp2ap020a00f_get_thresh_reg(chan, dir);
|
|
|
|
if (thresh_reg_l > GP2AP020A00F_PH_L_REG) {
|
|
err = -EINVAL;
|
|
goto error_unlock;
|
|
}
|
|
|
|
*val = data->thresh_val[GP2AP020A00F_THRESH_VAL_ID(thresh_reg_l)];
|
|
|
|
error_unlock:
|
|
mutex_unlock(&data->lock);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int gp2ap020a00f_write_prox_event_config(struct iio_dev *indio_dev,
|
|
int state)
|
|
{
|
|
struct gp2ap020a00f_data *data = iio_priv(indio_dev);
|
|
enum gp2ap020a00f_cmd cmd_high_ev, cmd_low_ev;
|
|
int err;
|
|
|
|
cmd_high_ev = state ? GP2AP020A00F_CMD_PROX_HIGH_EV_EN :
|
|
GP2AP020A00F_CMD_PROX_HIGH_EV_DIS;
|
|
cmd_low_ev = state ? GP2AP020A00F_CMD_PROX_LOW_EV_EN :
|
|
GP2AP020A00F_CMD_PROX_LOW_EV_DIS;
|
|
|
|
/*
|
|
* In order to enable proximity detection feature in the device
|
|
* both high and low threshold registers have to be written
|
|
* with different values, greater than zero.
|
|
*/
|
|
if (state) {
|
|
if (data->thresh_val[GP2AP020A00F_THRESH_PL] == 0)
|
|
return -EINVAL;
|
|
|
|
if (data->thresh_val[GP2AP020A00F_THRESH_PH] == 0)
|
|
return -EINVAL;
|
|
}
|
|
|
|
err = gp2ap020a00f_exec_cmd(data, cmd_high_ev);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
err = gp2ap020a00f_exec_cmd(data, cmd_low_ev);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
free_irq(data->client->irq, indio_dev);
|
|
|
|
if (state)
|
|
err = request_threaded_irq(data->client->irq, NULL,
|
|
&gp2ap020a00f_prox_sensing_handler,
|
|
IRQF_TRIGGER_RISING |
|
|
IRQF_TRIGGER_FALLING |
|
|
IRQF_ONESHOT,
|
|
"gp2ap020a00f_prox_sensing",
|
|
indio_dev);
|
|
else {
|
|
err = request_threaded_irq(data->client->irq, NULL,
|
|
&gp2ap020a00f_thresh_event_handler,
|
|
IRQF_TRIGGER_FALLING |
|
|
IRQF_ONESHOT,
|
|
"gp2ap020a00f_thresh_event",
|
|
indio_dev);
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static int gp2ap020a00f_write_event_config(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan,
|
|
enum iio_event_type type,
|
|
enum iio_event_direction dir,
|
|
int state)
|
|
{
|
|
struct gp2ap020a00f_data *data = iio_priv(indio_dev);
|
|
enum gp2ap020a00f_cmd cmd;
|
|
int err;
|
|
|
|
mutex_lock(&data->lock);
|
|
|
|
switch (chan->type) {
|
|
case IIO_PROXIMITY:
|
|
err = gp2ap020a00f_write_prox_event_config(indio_dev, state);
|
|
break;
|
|
case IIO_LIGHT:
|
|
if (dir == IIO_EV_DIR_RISING) {
|
|
cmd = state ? GP2AP020A00F_CMD_ALS_HIGH_EV_EN :
|
|
GP2AP020A00F_CMD_ALS_HIGH_EV_DIS;
|
|
err = gp2ap020a00f_exec_cmd(data, cmd);
|
|
} else {
|
|
cmd = state ? GP2AP020A00F_CMD_ALS_LOW_EV_EN :
|
|
GP2AP020A00F_CMD_ALS_LOW_EV_DIS;
|
|
err = gp2ap020a00f_exec_cmd(data, cmd);
|
|
}
|
|
break;
|
|
default:
|
|
err = -EINVAL;
|
|
}
|
|
|
|
mutex_unlock(&data->lock);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int gp2ap020a00f_read_event_config(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan,
|
|
enum iio_event_type type,
|
|
enum iio_event_direction dir)
|
|
{
|
|
struct gp2ap020a00f_data *data = iio_priv(indio_dev);
|
|
int event_en = 0;
|
|
|
|
mutex_lock(&data->lock);
|
|
|
|
switch (chan->type) {
|
|
case IIO_PROXIMITY:
|
|
if (dir == IIO_EV_DIR_RISING)
|
|
event_en = test_bit(GP2AP020A00F_FLAG_PROX_RISING_EV,
|
|
&data->flags);
|
|
else
|
|
event_en = test_bit(GP2AP020A00F_FLAG_PROX_FALLING_EV,
|
|
&data->flags);
|
|
break;
|
|
case IIO_LIGHT:
|
|
if (dir == IIO_EV_DIR_RISING)
|
|
event_en = test_bit(GP2AP020A00F_FLAG_ALS_RISING_EV,
|
|
&data->flags);
|
|
else
|
|
event_en = test_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV,
|
|
&data->flags);
|
|
break;
|
|
default:
|
|
event_en = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
mutex_unlock(&data->lock);
|
|
|
|
return event_en;
|
|
}
|
|
|
|
static int gp2ap020a00f_read_channel(struct gp2ap020a00f_data *data,
|
|
struct iio_chan_spec const *chan, int *val)
|
|
{
|
|
enum gp2ap020a00f_cmd cmd;
|
|
int err;
|
|
|
|
switch (chan->scan_index) {
|
|
case GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR:
|
|
cmd = GP2AP020A00F_CMD_READ_RAW_CLEAR;
|
|
break;
|
|
case GP2AP020A00F_SCAN_MODE_LIGHT_IR:
|
|
cmd = GP2AP020A00F_CMD_READ_RAW_IR;
|
|
break;
|
|
case GP2AP020A00F_SCAN_MODE_PROXIMITY:
|
|
cmd = GP2AP020A00F_CMD_READ_RAW_PROXIMITY;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
err = gp2ap020a00f_exec_cmd(data, cmd);
|
|
if (err < 0) {
|
|
dev_err(&data->client->dev,
|
|
"gp2ap020a00f_exec_cmd failed\n");
|
|
goto error_ret;
|
|
}
|
|
|
|
err = gp2ap020a00f_read_output(data, chan->address, val);
|
|
if (err < 0)
|
|
dev_err(&data->client->dev,
|
|
"gp2ap020a00f_read_output failed\n");
|
|
|
|
err = gp2ap020a00f_set_operation_mode(data,
|
|
GP2AP020A00F_OPMODE_SHUTDOWN);
|
|
if (err < 0)
|
|
dev_err(&data->client->dev,
|
|
"Failed to shut down the device.\n");
|
|
|
|
if (cmd == GP2AP020A00F_CMD_READ_RAW_CLEAR ||
|
|
cmd == GP2AP020A00F_CMD_READ_RAW_IR)
|
|
gp2ap020a00f_output_to_lux(data, val);
|
|
|
|
error_ret:
|
|
return err;
|
|
}
|
|
|
|
static int gp2ap020a00f_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val, int *val2,
|
|
long mask)
|
|
{
|
|
struct gp2ap020a00f_data *data = iio_priv(indio_dev);
|
|
int err = -EINVAL;
|
|
|
|
if (mask == IIO_CHAN_INFO_RAW) {
|
|
err = iio_device_claim_direct_mode(indio_dev);
|
|
if (err)
|
|
return err;
|
|
|
|
err = gp2ap020a00f_read_channel(data, chan, val);
|
|
iio_device_release_direct_mode(indio_dev);
|
|
}
|
|
return err < 0 ? err : IIO_VAL_INT;
|
|
}
|
|
|
|
static const struct iio_event_spec gp2ap020a00f_event_spec_light[] = {
|
|
{
|
|
.type = IIO_EV_TYPE_THRESH,
|
|
.dir = IIO_EV_DIR_RISING,
|
|
.mask_separate = BIT(IIO_EV_INFO_VALUE) |
|
|
BIT(IIO_EV_INFO_ENABLE),
|
|
}, {
|
|
.type = IIO_EV_TYPE_THRESH,
|
|
.dir = IIO_EV_DIR_FALLING,
|
|
.mask_separate = BIT(IIO_EV_INFO_VALUE) |
|
|
BIT(IIO_EV_INFO_ENABLE),
|
|
},
|
|
};
|
|
|
|
static const struct iio_event_spec gp2ap020a00f_event_spec_prox[] = {
|
|
{
|
|
.type = IIO_EV_TYPE_ROC,
|
|
.dir = IIO_EV_DIR_RISING,
|
|
.mask_separate = BIT(IIO_EV_INFO_VALUE) |
|
|
BIT(IIO_EV_INFO_ENABLE),
|
|
}, {
|
|
.type = IIO_EV_TYPE_ROC,
|
|
.dir = IIO_EV_DIR_FALLING,
|
|
.mask_separate = BIT(IIO_EV_INFO_VALUE) |
|
|
BIT(IIO_EV_INFO_ENABLE),
|
|
},
|
|
};
|
|
|
|
static const struct iio_chan_spec gp2ap020a00f_channels[] = {
|
|
{
|
|
.type = IIO_LIGHT,
|
|
.channel2 = IIO_MOD_LIGHT_CLEAR,
|
|
.modified = 1,
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
|
|
.scan_type = {
|
|
.sign = 'u',
|
|
.realbits = 24,
|
|
.shift = 0,
|
|
.storagebits = 32,
|
|
.endianness = IIO_LE,
|
|
},
|
|
.scan_index = GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR,
|
|
.address = GP2AP020A00F_D0_L_REG,
|
|
.event_spec = gp2ap020a00f_event_spec_light,
|
|
.num_event_specs = ARRAY_SIZE(gp2ap020a00f_event_spec_light),
|
|
},
|
|
{
|
|
.type = IIO_LIGHT,
|
|
.channel2 = IIO_MOD_LIGHT_IR,
|
|
.modified = 1,
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
|
|
.scan_type = {
|
|
.sign = 'u',
|
|
.realbits = 24,
|
|
.shift = 0,
|
|
.storagebits = 32,
|
|
.endianness = IIO_LE,
|
|
},
|
|
.scan_index = GP2AP020A00F_SCAN_MODE_LIGHT_IR,
|
|
.address = GP2AP020A00F_D1_L_REG,
|
|
},
|
|
{
|
|
.type = IIO_PROXIMITY,
|
|
.modified = 0,
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
|
|
.scan_type = {
|
|
.sign = 'u',
|
|
.realbits = 16,
|
|
.shift = 0,
|
|
.storagebits = 16,
|
|
.endianness = IIO_LE,
|
|
},
|
|
.scan_index = GP2AP020A00F_SCAN_MODE_PROXIMITY,
|
|
.address = GP2AP020A00F_D2_L_REG,
|
|
.event_spec = gp2ap020a00f_event_spec_prox,
|
|
.num_event_specs = ARRAY_SIZE(gp2ap020a00f_event_spec_prox),
|
|
},
|
|
IIO_CHAN_SOFT_TIMESTAMP(GP2AP020A00F_CHAN_TIMESTAMP),
|
|
};
|
|
|
|
static const struct iio_info gp2ap020a00f_info = {
|
|
.read_raw = &gp2ap020a00f_read_raw,
|
|
.read_event_value = &gp2ap020a00f_read_event_val,
|
|
.read_event_config = &gp2ap020a00f_read_event_config,
|
|
.write_event_value = &gp2ap020a00f_write_event_val,
|
|
.write_event_config = &gp2ap020a00f_write_event_config,
|
|
.driver_module = THIS_MODULE,
|
|
};
|
|
|
|
static int gp2ap020a00f_buffer_postenable(struct iio_dev *indio_dev)
|
|
{
|
|
struct gp2ap020a00f_data *data = iio_priv(indio_dev);
|
|
int i, err = 0;
|
|
|
|
mutex_lock(&data->lock);
|
|
|
|
/*
|
|
* Enable triggers according to the scan_mask. Enabling either
|
|
* LIGHT_CLEAR or LIGHT_IR scan mode results in enabling ALS
|
|
* module in the device, which generates samples in both D0 (clear)
|
|
* and D1 (ir) registers. As the two registers are bound to the
|
|
* two separate IIO channels they are treated in the driver logic
|
|
* as if they were controlled independently.
|
|
*/
|
|
for_each_set_bit(i, indio_dev->active_scan_mask,
|
|
indio_dev->masklength) {
|
|
switch (i) {
|
|
case GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR:
|
|
err = gp2ap020a00f_exec_cmd(data,
|
|
GP2AP020A00F_CMD_TRIGGER_CLEAR_EN);
|
|
break;
|
|
case GP2AP020A00F_SCAN_MODE_LIGHT_IR:
|
|
err = gp2ap020a00f_exec_cmd(data,
|
|
GP2AP020A00F_CMD_TRIGGER_IR_EN);
|
|
break;
|
|
case GP2AP020A00F_SCAN_MODE_PROXIMITY:
|
|
err = gp2ap020a00f_exec_cmd(data,
|
|
GP2AP020A00F_CMD_TRIGGER_PROX_EN);
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (err < 0)
|
|
goto error_unlock;
|
|
|
|
data->buffer = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
|
|
if (!data->buffer) {
|
|
err = -ENOMEM;
|
|
goto error_unlock;
|
|
}
|
|
|
|
err = iio_triggered_buffer_postenable(indio_dev);
|
|
|
|
error_unlock:
|
|
mutex_unlock(&data->lock);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int gp2ap020a00f_buffer_predisable(struct iio_dev *indio_dev)
|
|
{
|
|
struct gp2ap020a00f_data *data = iio_priv(indio_dev);
|
|
int i, err;
|
|
|
|
mutex_lock(&data->lock);
|
|
|
|
err = iio_triggered_buffer_predisable(indio_dev);
|
|
if (err < 0)
|
|
goto error_unlock;
|
|
|
|
for_each_set_bit(i, indio_dev->active_scan_mask,
|
|
indio_dev->masklength) {
|
|
switch (i) {
|
|
case GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR:
|
|
err = gp2ap020a00f_exec_cmd(data,
|
|
GP2AP020A00F_CMD_TRIGGER_CLEAR_DIS);
|
|
break;
|
|
case GP2AP020A00F_SCAN_MODE_LIGHT_IR:
|
|
err = gp2ap020a00f_exec_cmd(data,
|
|
GP2AP020A00F_CMD_TRIGGER_IR_DIS);
|
|
break;
|
|
case GP2AP020A00F_SCAN_MODE_PROXIMITY:
|
|
err = gp2ap020a00f_exec_cmd(data,
|
|
GP2AP020A00F_CMD_TRIGGER_PROX_DIS);
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (err == 0)
|
|
kfree(data->buffer);
|
|
|
|
error_unlock:
|
|
mutex_unlock(&data->lock);
|
|
|
|
return err;
|
|
}
|
|
|
|
static const struct iio_buffer_setup_ops gp2ap020a00f_buffer_setup_ops = {
|
|
.postenable = &gp2ap020a00f_buffer_postenable,
|
|
.predisable = &gp2ap020a00f_buffer_predisable,
|
|
};
|
|
|
|
static const struct iio_trigger_ops gp2ap020a00f_trigger_ops = {
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static int gp2ap020a00f_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct gp2ap020a00f_data *data;
|
|
struct iio_dev *indio_dev;
|
|
struct regmap *regmap;
|
|
int err;
|
|
|
|
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
|
|
data = iio_priv(indio_dev);
|
|
|
|
data->vled_reg = devm_regulator_get(&client->dev, "vled");
|
|
if (IS_ERR(data->vled_reg))
|
|
return PTR_ERR(data->vled_reg);
|
|
|
|
err = regulator_enable(data->vled_reg);
|
|
if (err)
|
|
return err;
|
|
|
|
regmap = devm_regmap_init_i2c(client, &gp2ap020a00f_regmap_config);
|
|
if (IS_ERR(regmap)) {
|
|
dev_err(&client->dev, "Regmap initialization failed.\n");
|
|
err = PTR_ERR(regmap);
|
|
goto error_regulator_disable;
|
|
}
|
|
|
|
/* Initialize device registers */
|
|
err = regmap_bulk_write(regmap, GP2AP020A00F_OP_REG,
|
|
gp2ap020a00f_reg_init_tab,
|
|
ARRAY_SIZE(gp2ap020a00f_reg_init_tab));
|
|
|
|
if (err < 0) {
|
|
dev_err(&client->dev, "Device initialization failed.\n");
|
|
goto error_regulator_disable;
|
|
}
|
|
|
|
i2c_set_clientdata(client, indio_dev);
|
|
|
|
data->client = client;
|
|
data->cur_opmode = GP2AP020A00F_OPMODE_SHUTDOWN;
|
|
data->regmap = regmap;
|
|
init_waitqueue_head(&data->data_ready_queue);
|
|
|
|
mutex_init(&data->lock);
|
|
indio_dev->dev.parent = &client->dev;
|
|
indio_dev->channels = gp2ap020a00f_channels;
|
|
indio_dev->num_channels = ARRAY_SIZE(gp2ap020a00f_channels);
|
|
indio_dev->info = &gp2ap020a00f_info;
|
|
indio_dev->name = id->name;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
|
|
/* Allocate buffer */
|
|
err = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
|
|
&gp2ap020a00f_trigger_handler, &gp2ap020a00f_buffer_setup_ops);
|
|
if (err < 0)
|
|
goto error_regulator_disable;
|
|
|
|
/* Allocate trigger */
|
|
data->trig = devm_iio_trigger_alloc(&client->dev, "%s-trigger",
|
|
indio_dev->name);
|
|
if (data->trig == NULL) {
|
|
err = -ENOMEM;
|
|
dev_err(&indio_dev->dev, "Failed to allocate iio trigger.\n");
|
|
goto error_uninit_buffer;
|
|
}
|
|
|
|
/* This needs to be requested here for read_raw calls to work. */
|
|
err = request_threaded_irq(client->irq, NULL,
|
|
&gp2ap020a00f_thresh_event_handler,
|
|
IRQF_TRIGGER_FALLING |
|
|
IRQF_ONESHOT,
|
|
"gp2ap020a00f_als_event",
|
|
indio_dev);
|
|
if (err < 0) {
|
|
dev_err(&client->dev, "Irq request failed.\n");
|
|
goto error_uninit_buffer;
|
|
}
|
|
|
|
data->trig->ops = &gp2ap020a00f_trigger_ops;
|
|
data->trig->dev.parent = &data->client->dev;
|
|
|
|
init_irq_work(&data->work, gp2ap020a00f_iio_trigger_work);
|
|
|
|
err = iio_trigger_register(data->trig);
|
|
if (err < 0) {
|
|
dev_err(&client->dev, "Failed to register iio trigger.\n");
|
|
goto error_free_irq;
|
|
}
|
|
|
|
err = iio_device_register(indio_dev);
|
|
if (err < 0)
|
|
goto error_trigger_unregister;
|
|
|
|
return 0;
|
|
|
|
error_trigger_unregister:
|
|
iio_trigger_unregister(data->trig);
|
|
error_free_irq:
|
|
free_irq(client->irq, indio_dev);
|
|
error_uninit_buffer:
|
|
iio_triggered_buffer_cleanup(indio_dev);
|
|
error_regulator_disable:
|
|
regulator_disable(data->vled_reg);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int gp2ap020a00f_remove(struct i2c_client *client)
|
|
{
|
|
struct iio_dev *indio_dev = i2c_get_clientdata(client);
|
|
struct gp2ap020a00f_data *data = iio_priv(indio_dev);
|
|
int err;
|
|
|
|
err = gp2ap020a00f_set_operation_mode(data,
|
|
GP2AP020A00F_OPMODE_SHUTDOWN);
|
|
if (err < 0)
|
|
dev_err(&indio_dev->dev, "Failed to power off the device.\n");
|
|
|
|
iio_device_unregister(indio_dev);
|
|
iio_trigger_unregister(data->trig);
|
|
free_irq(client->irq, indio_dev);
|
|
iio_triggered_buffer_cleanup(indio_dev);
|
|
regulator_disable(data->vled_reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id gp2ap020a00f_id[] = {
|
|
{ GP2A_I2C_NAME, 0 },
|
|
{ }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(i2c, gp2ap020a00f_id);
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id gp2ap020a00f_of_match[] = {
|
|
{ .compatible = "sharp,gp2ap020a00f" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, gp2ap020a00f_of_match);
|
|
#endif
|
|
|
|
static struct i2c_driver gp2ap020a00f_driver = {
|
|
.driver = {
|
|
.name = GP2A_I2C_NAME,
|
|
.of_match_table = of_match_ptr(gp2ap020a00f_of_match),
|
|
},
|
|
.probe = gp2ap020a00f_probe,
|
|
.remove = gp2ap020a00f_remove,
|
|
.id_table = gp2ap020a00f_id,
|
|
};
|
|
|
|
module_i2c_driver(gp2ap020a00f_driver);
|
|
|
|
MODULE_AUTHOR("Jacek Anaszewski <j.anaszewski@samsung.com>");
|
|
MODULE_DESCRIPTION("Sharp GP2AP020A00F Proximity/ALS sensor driver");
|
|
MODULE_LICENSE("GPL v2");
|