mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-27 05:55:18 +07:00
226b9391d1
The at24 driver allows to register I2C EEPROM chips using different vendor and devices, but the I2C subsystem does not take the vendor into account when matching using the I2C table since it only has device entries. But when matching using an OF table, both the vendor and device has to be taken into account so the driver defines only a set of compatible strings using the "atmel" vendor as a generic fallback for compatible I2C devices. So add this generic fallback to the device node compatible string to make the device to match the driver using the OF device ID table. Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
341 lines
7.6 KiB
Plaintext
341 lines
7.6 KiB
Plaintext
/*
|
|
* P2041RDB Device Tree Source
|
|
*
|
|
* Copyright 2011 - 2015 Freescale Semiconductor Inc.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions are met:
|
|
* * Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* * Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* * Neither the name of Freescale Semiconductor nor the
|
|
* names of its contributors may be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
*
|
|
* ALTERNATIVELY, this software may be distributed under the terms of the
|
|
* GNU General Public License ("GPL") as published by the Free Software
|
|
* Foundation, either version 2 of that License or (at your option) any
|
|
* later version.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
|
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
|
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
|
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
|
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
|
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/include/ "p2041si-pre.dtsi"
|
|
|
|
/ {
|
|
model = "fsl,P2041RDB";
|
|
compatible = "fsl,P2041RDB";
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
interrupt-parent = <&mpic>;
|
|
|
|
aliases {
|
|
phy_rgmii_0 = &phy_rgmii_0;
|
|
phy_rgmii_1 = &phy_rgmii_1;
|
|
phy_sgmii_2 = &phy_sgmii_2;
|
|
phy_sgmii_3 = &phy_sgmii_3;
|
|
phy_sgmii_4 = &phy_sgmii_4;
|
|
phy_sgmii_1c = &phy_sgmii_1c;
|
|
phy_sgmii_1d = &phy_sgmii_1d;
|
|
phy_sgmii_1e = &phy_sgmii_1e;
|
|
phy_sgmii_1f = &phy_sgmii_1f;
|
|
phy_xgmii_2 = &phy_xgmii_2;
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
};
|
|
|
|
reserved-memory {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
bman_fbpr: bman-fbpr {
|
|
size = <0 0x1000000>;
|
|
alignment = <0 0x1000000>;
|
|
};
|
|
qman_fqd: qman-fqd {
|
|
size = <0 0x400000>;
|
|
alignment = <0 0x400000>;
|
|
};
|
|
qman_pfdr: qman-pfdr {
|
|
size = <0 0x2000000>;
|
|
alignment = <0 0x2000000>;
|
|
};
|
|
};
|
|
|
|
dcsr: dcsr@f00000000 {
|
|
ranges = <0x00000000 0xf 0x00000000 0x01008000>;
|
|
};
|
|
|
|
bportals: bman-portals@ff4000000 {
|
|
ranges = <0x0 0xf 0xf4000000 0x200000>;
|
|
};
|
|
|
|
qportals: qman-portals@ff4200000 {
|
|
ranges = <0x0 0xf 0xf4200000 0x200000>;
|
|
};
|
|
|
|
soc: soc@ffe000000 {
|
|
ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
|
|
reg = <0xf 0xfe000000 0 0x00001000>;
|
|
spi@110000 {
|
|
flash@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "spansion,s25sl12801", "jedec,spi-nor";
|
|
reg = <0>;
|
|
spi-max-frequency = <40000000>; /* input clock */
|
|
partition@u-boot {
|
|
label = "u-boot";
|
|
reg = <0x00000000 0x00100000>;
|
|
read-only;
|
|
};
|
|
partition@kernel {
|
|
label = "kernel";
|
|
reg = <0x00100000 0x00500000>;
|
|
read-only;
|
|
};
|
|
partition@dtb {
|
|
label = "dtb";
|
|
reg = <0x00600000 0x00100000>;
|
|
read-only;
|
|
};
|
|
partition@fs {
|
|
label = "file system";
|
|
reg = <0x00700000 0x00900000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
i2c@118000 {
|
|
lm75b@48 {
|
|
compatible = "nxp,lm75a";
|
|
reg = <0x48>;
|
|
};
|
|
eeprom@50 {
|
|
compatible = "atmel,24c256";
|
|
reg = <0x50>;
|
|
};
|
|
rtc@68 {
|
|
compatible = "pericom,pt7c4338";
|
|
reg = <0x68>;
|
|
};
|
|
adt7461@4c {
|
|
compatible = "adi,adt7461";
|
|
reg = <0x4c>;
|
|
};
|
|
};
|
|
|
|
i2c@118100 {
|
|
eeprom@50 {
|
|
compatible = "atmel,24c256";
|
|
reg = <0x50>;
|
|
};
|
|
};
|
|
|
|
usb1: usb@211000 {
|
|
dr_mode = "host";
|
|
};
|
|
|
|
fman@400000 {
|
|
ethernet@e0000 {
|
|
phy-handle = <&phy_sgmii_2>;
|
|
phy-connection-type = "sgmii";
|
|
};
|
|
|
|
mdio@e1120 {
|
|
phy_rgmii_0: ethernet-phy@0 {
|
|
reg = <0x0>;
|
|
};
|
|
|
|
phy_rgmii_1: ethernet-phy@1 {
|
|
reg = <0x1>;
|
|
};
|
|
|
|
phy_sgmii_2: ethernet-phy@2 {
|
|
reg = <0x2>;
|
|
};
|
|
|
|
phy_sgmii_3: ethernet-phy@3 {
|
|
reg = <0x3>;
|
|
};
|
|
|
|
phy_sgmii_4: ethernet-phy@4 {
|
|
reg = <0x4>;
|
|
};
|
|
|
|
phy_sgmii_1c: ethernet-phy@1c {
|
|
reg = <0x1c>;
|
|
};
|
|
|
|
phy_sgmii_1d: ethernet-phy@1d {
|
|
reg = <0x1d>;
|
|
};
|
|
|
|
phy_sgmii_1e: ethernet-phy@1e {
|
|
reg = <0x1e>;
|
|
};
|
|
|
|
phy_sgmii_1f: ethernet-phy@1f {
|
|
reg = <0x1f>;
|
|
};
|
|
};
|
|
|
|
ethernet@e2000 {
|
|
phy-handle = <&phy_sgmii_3>;
|
|
phy-connection-type = "sgmii";
|
|
};
|
|
|
|
ethernet@e4000 {
|
|
phy-handle = <&phy_sgmii_4>;
|
|
phy-connection-type = "sgmii";
|
|
};
|
|
|
|
ethernet@e6000 {
|
|
phy-handle = <&phy_rgmii_1>;
|
|
phy-connection-type = "rgmii";
|
|
};
|
|
|
|
ethernet@e8000 {
|
|
phy-handle = <&phy_rgmii_0>;
|
|
phy-connection-type = "rgmii";
|
|
};
|
|
|
|
ethernet@f0000 {
|
|
phy-handle = <&phy_xgmii_2>;
|
|
phy-connection-type = "xgmii";
|
|
};
|
|
|
|
mdio@f1000 {
|
|
phy_xgmii_2: ethernet-phy@0 {
|
|
compatible = "ethernet-phy-ieee802.3-c45";
|
|
reg = <0x0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
rio: rapidio@ffe0c0000 {
|
|
reg = <0xf 0xfe0c0000 0 0x11000>;
|
|
|
|
port1 {
|
|
ranges = <0 0 0xc 0x20000000 0 0x10000000>;
|
|
};
|
|
port2 {
|
|
ranges = <0 0 0xc 0x30000000 0 0x10000000>;
|
|
};
|
|
};
|
|
|
|
lbc: localbus@ffe124000 {
|
|
reg = <0xf 0xfe124000 0 0x1000>;
|
|
ranges = <0 0 0xf 0xe8000000 0x08000000
|
|
1 0 0xf 0xffa00000 0x00040000>;
|
|
|
|
flash@0,0 {
|
|
compatible = "cfi-flash";
|
|
reg = <0 0 0x08000000>;
|
|
bank-width = <2>;
|
|
device-width = <2>;
|
|
};
|
|
|
|
nand@1,0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,elbc-fcm-nand";
|
|
reg = <0x1 0x0 0x40000>;
|
|
|
|
partition@0 {
|
|
label = "NAND U-Boot Image";
|
|
reg = <0x0 0x02000000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@2000000 {
|
|
label = "NAND Root File System";
|
|
reg = <0x02000000 0x10000000>;
|
|
};
|
|
|
|
partition@12000000 {
|
|
label = "NAND Compressed RFS Image";
|
|
reg = <0x12000000 0x08000000>;
|
|
};
|
|
|
|
partition@1a000000 {
|
|
label = "NAND Linux Kernel Image";
|
|
reg = <0x1a000000 0x04000000>;
|
|
};
|
|
|
|
partition@1e000000 {
|
|
label = "NAND DTB Image";
|
|
reg = <0x1e000000 0x01000000>;
|
|
};
|
|
|
|
partition@1f000000 {
|
|
label = "NAND Writable User area";
|
|
reg = <0x1f000000 0x01000000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
pci0: pcie@ffe200000 {
|
|
reg = <0xf 0xfe200000 0 0x1000>;
|
|
ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
|
|
0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
|
|
pcie@0 {
|
|
ranges = <0x02000000 0 0xe0000000
|
|
0x02000000 0 0xe0000000
|
|
0 0x20000000
|
|
|
|
0x01000000 0 0x00000000
|
|
0x01000000 0 0x00000000
|
|
0 0x00010000>;
|
|
};
|
|
};
|
|
|
|
pci1: pcie@ffe201000 {
|
|
reg = <0xf 0xfe201000 0 0x1000>;
|
|
ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
|
|
0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
|
|
pcie@0 {
|
|
ranges = <0x02000000 0 0xe0000000
|
|
0x02000000 0 0xe0000000
|
|
0 0x20000000
|
|
|
|
0x01000000 0 0x00000000
|
|
0x01000000 0 0x00000000
|
|
0 0x00010000>;
|
|
};
|
|
};
|
|
|
|
pci2: pcie@ffe202000 {
|
|
reg = <0xf 0xfe202000 0 0x1000>;
|
|
ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
|
|
0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
|
|
pcie@0 {
|
|
ranges = <0x02000000 0 0xe0000000
|
|
0x02000000 0 0xe0000000
|
|
0 0x20000000
|
|
|
|
0x01000000 0 0x00000000
|
|
0x01000000 0 0x00000000
|
|
0 0x00010000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
/include/ "p2041si-post.dtsi"
|