linux_dsm_epyc7002/drivers/net/wireless/wl12xx/wl1251_spi.c
David-John Willis c95cf3d09a wl1251: add NVS in EEPROM support
wl1251 supports also that NVS is stored in a separate EEPROM, add support
for that.

kvalo: use platform data instead Kconfig and use kernel style

Signed-off-by: David-John Willis <John.Willis@Distant-earth.com>
Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18 17:09:24 -05:00

347 lines
7.1 KiB
C

/*
* This file is part of wl1251
*
* Copyright (C) 2008 Nokia Corporation
*
* Contact: Kalle Valo <kalle.valo@nokia.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*
*/
#include <linux/irq.h>
#include <linux/module.h>
#include <linux/crc7.h>
#include <linux/spi/spi.h>
#include <linux/spi/wl12xx.h>
#include "wl1251.h"
#include "wl1251_reg.h"
#include "wl1251_spi.h"
static irqreturn_t wl1251_irq(int irq, void *cookie)
{
struct wl1251 *wl;
wl1251_debug(DEBUG_IRQ, "IRQ");
wl = cookie;
ieee80211_queue_work(wl->hw, &wl->irq_work);
return IRQ_HANDLED;
}
static struct spi_device *wl_to_spi(struct wl1251 *wl)
{
return wl->if_priv;
}
static void wl1251_spi_reset(struct wl1251 *wl)
{
u8 *cmd;
struct spi_transfer t;
struct spi_message m;
cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL);
if (!cmd) {
wl1251_error("could not allocate cmd for spi reset");
return;
}
memset(&t, 0, sizeof(t));
spi_message_init(&m);
memset(cmd, 0xff, WSPI_INIT_CMD_LEN);
t.tx_buf = cmd;
t.len = WSPI_INIT_CMD_LEN;
spi_message_add_tail(&t, &m);
spi_sync(wl_to_spi(wl), &m);
wl1251_dump(DEBUG_SPI, "spi reset -> ", cmd, WSPI_INIT_CMD_LEN);
}
static void wl1251_spi_wake(struct wl1251 *wl)
{
u8 crc[WSPI_INIT_CMD_CRC_LEN], *cmd;
struct spi_transfer t;
struct spi_message m;
cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL);
if (!cmd) {
wl1251_error("could not allocate cmd for spi init");
return;
}
memset(crc, 0, sizeof(crc));
memset(&t, 0, sizeof(t));
spi_message_init(&m);
/*
* Set WSPI_INIT_COMMAND
* the data is being send from the MSB to LSB
*/
cmd[2] = 0xff;
cmd[3] = 0xff;
cmd[1] = WSPI_INIT_CMD_START | WSPI_INIT_CMD_TX;
cmd[0] = 0;
cmd[7] = 0;
cmd[6] |= HW_ACCESS_WSPI_INIT_CMD_MASK << 3;
cmd[6] |= HW_ACCESS_WSPI_FIXED_BUSY_LEN & WSPI_INIT_CMD_FIXEDBUSY_LEN;
if (HW_ACCESS_WSPI_FIXED_BUSY_LEN == 0)
cmd[5] |= WSPI_INIT_CMD_DIS_FIXEDBUSY;
else
cmd[5] |= WSPI_INIT_CMD_EN_FIXEDBUSY;
cmd[5] |= WSPI_INIT_CMD_IOD | WSPI_INIT_CMD_IP | WSPI_INIT_CMD_CS
| WSPI_INIT_CMD_WSPI | WSPI_INIT_CMD_WS;
crc[0] = cmd[1];
crc[1] = cmd[0];
crc[2] = cmd[7];
crc[3] = cmd[6];
crc[4] = cmd[5];
cmd[4] |= crc7(0, crc, WSPI_INIT_CMD_CRC_LEN) << 1;
cmd[4] |= WSPI_INIT_CMD_END;
t.tx_buf = cmd;
t.len = WSPI_INIT_CMD_LEN;
spi_message_add_tail(&t, &m);
spi_sync(wl_to_spi(wl), &m);
wl1251_dump(DEBUG_SPI, "spi init -> ", cmd, WSPI_INIT_CMD_LEN);
}
static void wl1251_spi_reset_wake(struct wl1251 *wl)
{
wl1251_spi_reset(wl);
wl1251_spi_wake(wl);
}
static void wl1251_spi_read(struct wl1251 *wl, int addr, void *buf,
size_t len)
{
struct spi_transfer t[3];
struct spi_message m;
u8 *busy_buf;
u32 *cmd;
cmd = &wl->buffer_cmd;
busy_buf = wl->buffer_busyword;
*cmd = 0;
*cmd |= WSPI_CMD_READ;
*cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH;
*cmd |= addr & WSPI_CMD_BYTE_ADDR;
spi_message_init(&m);
memset(t, 0, sizeof(t));
t[0].tx_buf = cmd;
t[0].len = 4;
spi_message_add_tail(&t[0], &m);
/* Busy and non busy words read */
t[1].rx_buf = busy_buf;
t[1].len = WL1251_BUSY_WORD_LEN;
spi_message_add_tail(&t[1], &m);
t[2].rx_buf = buf;
t[2].len = len;
spi_message_add_tail(&t[2], &m);
spi_sync(wl_to_spi(wl), &m);
/* FIXME: check busy words */
wl1251_dump(DEBUG_SPI, "spi_read cmd -> ", cmd, sizeof(*cmd));
wl1251_dump(DEBUG_SPI, "spi_read buf <- ", buf, len);
}
static void wl1251_spi_write(struct wl1251 *wl, int addr, void *buf,
size_t len)
{
struct spi_transfer t[2];
struct spi_message m;
u32 *cmd;
cmd = &wl->buffer_cmd;
*cmd = 0;
*cmd |= WSPI_CMD_WRITE;
*cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH;
*cmd |= addr & WSPI_CMD_BYTE_ADDR;
spi_message_init(&m);
memset(t, 0, sizeof(t));
t[0].tx_buf = cmd;
t[0].len = sizeof(*cmd);
spi_message_add_tail(&t[0], &m);
t[1].tx_buf = buf;
t[1].len = len;
spi_message_add_tail(&t[1], &m);
spi_sync(wl_to_spi(wl), &m);
wl1251_dump(DEBUG_SPI, "spi_write cmd -> ", cmd, sizeof(*cmd));
wl1251_dump(DEBUG_SPI, "spi_write buf -> ", buf, len);
}
static void wl1251_spi_enable_irq(struct wl1251 *wl)
{
return enable_irq(wl->irq);
}
static void wl1251_spi_disable_irq(struct wl1251 *wl)
{
return disable_irq(wl->irq);
}
static const struct wl1251_if_operations wl1251_spi_ops = {
.read = wl1251_spi_read,
.write = wl1251_spi_write,
.reset = wl1251_spi_reset_wake,
.enable_irq = wl1251_spi_enable_irq,
.disable_irq = wl1251_spi_disable_irq,
};
static int __devinit wl1251_spi_probe(struct spi_device *spi)
{
struct wl12xx_platform_data *pdata;
struct ieee80211_hw *hw;
struct wl1251 *wl;
int ret;
pdata = spi->dev.platform_data;
if (!pdata) {
wl1251_error("no platform data");
return -ENODEV;
}
hw = wl1251_alloc_hw();
if (IS_ERR(hw))
return PTR_ERR(hw);
wl = hw->priv;
SET_IEEE80211_DEV(hw, &spi->dev);
dev_set_drvdata(&spi->dev, wl);
wl->if_priv = spi;
wl->if_ops = &wl1251_spi_ops;
/* This is the only SPI value that we need to set here, the rest
* comes from the board-peripherals file */
spi->bits_per_word = 32;
ret = spi_setup(spi);
if (ret < 0) {
wl1251_error("spi_setup failed");
goto out_free;
}
wl->set_power = pdata->set_power;
if (!wl->set_power) {
wl1251_error("set power function missing in platform data");
return -ENODEV;
}
wl->irq = spi->irq;
if (wl->irq < 0) {
wl1251_error("irq missing in platform data");
return -ENODEV;
}
wl->use_eeprom = pdata->use_eeprom;
ret = request_irq(wl->irq, wl1251_irq, 0, DRIVER_NAME, wl);
if (ret < 0) {
wl1251_error("request_irq() failed: %d", ret);
goto out_free;
}
set_irq_type(wl->irq, IRQ_TYPE_EDGE_RISING);
disable_irq(wl->irq);
ret = wl1251_init_ieee80211(wl);
if (ret)
goto out_irq;
return 0;
out_irq:
free_irq(wl->irq, wl);
out_free:
ieee80211_free_hw(hw);
return ret;
}
static int __devexit wl1251_spi_remove(struct spi_device *spi)
{
struct wl1251 *wl = dev_get_drvdata(&spi->dev);
free_irq(wl->irq, wl);
wl1251_free_hw(wl);
return 0;
}
static struct spi_driver wl1251_spi_driver = {
.driver = {
.name = "wl1251",
.bus = &spi_bus_type,
.owner = THIS_MODULE,
},
.probe = wl1251_spi_probe,
.remove = __devexit_p(wl1251_spi_remove),
};
static int __init wl1251_spi_init(void)
{
int ret;
ret = spi_register_driver(&wl1251_spi_driver);
if (ret < 0) {
wl1251_error("failed to register spi driver: %d", ret);
goto out;
}
out:
return ret;
}
static void __exit wl1251_spi_exit(void)
{
spi_unregister_driver(&wl1251_spi_driver);
wl1251_notice("unloaded");
}
module_init(wl1251_spi_init);
module_exit(wl1251_spi_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Kalle Valo <kalle.valo@nokia.com>");