mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-27 04:55:14 +07:00
5601df355b
Rejecting transfers should be handled by the core. Also, this will ensure proper locking which was forgotten in this open coded version and make sure resume mark is set after enabling clocks (not before). Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
608 lines
13 KiB
C
608 lines
13 KiB
C
/*
|
|
* Copyright (C) 2017 Sanechips Technology Co., Ltd.
|
|
* Copyright 2017 Linaro Ltd.
|
|
*
|
|
* Author: Baoyou Xie <baoyou.xie@linaro.org>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#define REG_CMD 0x04
|
|
#define REG_DEVADDR_H 0x0C
|
|
#define REG_DEVADDR_L 0x10
|
|
#define REG_CLK_DIV_FS 0x14
|
|
#define REG_CLK_DIV_HS 0x18
|
|
#define REG_WRCONF 0x1C
|
|
#define REG_RDCONF 0x20
|
|
#define REG_DATA 0x24
|
|
#define REG_STAT 0x28
|
|
|
|
#define I2C_STOP 0
|
|
#define I2C_MASTER BIT(0)
|
|
#define I2C_ADDR_MODE_TEN BIT(1)
|
|
#define I2C_IRQ_MSK_ENABLE BIT(3)
|
|
#define I2C_RW_READ BIT(4)
|
|
#define I2C_CMB_RW_EN BIT(5)
|
|
#define I2C_START BIT(6)
|
|
|
|
#define I2C_ADDR_LOW_MASK GENMASK(6, 0)
|
|
#define I2C_ADDR_LOW_SHIFT 0
|
|
#define I2C_ADDR_HI_MASK GENMASK(2, 0)
|
|
#define I2C_ADDR_HI_SHIFT 7
|
|
|
|
#define I2C_WFIFO_RESET BIT(7)
|
|
#define I2C_RFIFO_RESET BIT(7)
|
|
|
|
#define I2C_IRQ_ACK_CLEAR BIT(7)
|
|
#define I2C_INT_MASK GENMASK(6, 0)
|
|
|
|
#define I2C_TRANS_DONE BIT(0)
|
|
#define I2C_SR_EDEVICE BIT(1)
|
|
#define I2C_SR_EDATA BIT(2)
|
|
|
|
#define I2C_FIFO_MAX 16
|
|
|
|
#define I2C_TIMEOUT msecs_to_jiffies(1000)
|
|
|
|
#define DEV(i2c) ((i2c)->adap.dev.parent)
|
|
|
|
struct zx2967_i2c {
|
|
struct i2c_adapter adap;
|
|
struct clk *clk;
|
|
struct completion complete;
|
|
u32 clk_freq;
|
|
void __iomem *reg_base;
|
|
size_t residue;
|
|
int irq;
|
|
int msg_rd;
|
|
u8 *cur_trans;
|
|
u8 access_cnt;
|
|
int error;
|
|
};
|
|
|
|
static void zx2967_i2c_writel(struct zx2967_i2c *i2c,
|
|
u32 val, unsigned long reg)
|
|
{
|
|
writel_relaxed(val, i2c->reg_base + reg);
|
|
}
|
|
|
|
static u32 zx2967_i2c_readl(struct zx2967_i2c *i2c, unsigned long reg)
|
|
{
|
|
return readl_relaxed(i2c->reg_base + reg);
|
|
}
|
|
|
|
static void zx2967_i2c_writesb(struct zx2967_i2c *i2c,
|
|
void *data, unsigned long reg, int len)
|
|
{
|
|
writesb(i2c->reg_base + reg, data, len);
|
|
}
|
|
|
|
static void zx2967_i2c_readsb(struct zx2967_i2c *i2c,
|
|
void *data, unsigned long reg, int len)
|
|
{
|
|
readsb(i2c->reg_base + reg, data, len);
|
|
}
|
|
|
|
static void zx2967_i2c_start_ctrl(struct zx2967_i2c *i2c)
|
|
{
|
|
u32 status;
|
|
u32 ctl;
|
|
|
|
status = zx2967_i2c_readl(i2c, REG_STAT);
|
|
status |= I2C_IRQ_ACK_CLEAR;
|
|
zx2967_i2c_writel(i2c, status, REG_STAT);
|
|
|
|
ctl = zx2967_i2c_readl(i2c, REG_CMD);
|
|
if (i2c->msg_rd)
|
|
ctl |= I2C_RW_READ;
|
|
else
|
|
ctl &= ~I2C_RW_READ;
|
|
ctl &= ~I2C_CMB_RW_EN;
|
|
ctl |= I2C_START;
|
|
zx2967_i2c_writel(i2c, ctl, REG_CMD);
|
|
}
|
|
|
|
static void zx2967_i2c_flush_fifos(struct zx2967_i2c *i2c)
|
|
{
|
|
u32 offset;
|
|
u32 val;
|
|
|
|
if (i2c->msg_rd) {
|
|
offset = REG_RDCONF;
|
|
val = I2C_RFIFO_RESET;
|
|
} else {
|
|
offset = REG_WRCONF;
|
|
val = I2C_WFIFO_RESET;
|
|
}
|
|
|
|
val |= zx2967_i2c_readl(i2c, offset);
|
|
zx2967_i2c_writel(i2c, val, offset);
|
|
}
|
|
|
|
static int zx2967_i2c_empty_rx_fifo(struct zx2967_i2c *i2c, u32 size)
|
|
{
|
|
u8 val[I2C_FIFO_MAX] = {0};
|
|
int i;
|
|
|
|
if (size > I2C_FIFO_MAX) {
|
|
dev_err(DEV(i2c), "fifo size %d over the max value %d\n",
|
|
size, I2C_FIFO_MAX);
|
|
return -EINVAL;
|
|
}
|
|
|
|
zx2967_i2c_readsb(i2c, val, REG_DATA, size);
|
|
for (i = 0; i < size; i++) {
|
|
*i2c->cur_trans++ = val[i];
|
|
i2c->residue--;
|
|
}
|
|
|
|
barrier();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int zx2967_i2c_fill_tx_fifo(struct zx2967_i2c *i2c)
|
|
{
|
|
size_t residue = i2c->residue;
|
|
u8 *buf = i2c->cur_trans;
|
|
|
|
if (residue == 0) {
|
|
dev_err(DEV(i2c), "residue is %d\n", (int)residue);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (residue <= I2C_FIFO_MAX) {
|
|
zx2967_i2c_writesb(i2c, buf, REG_DATA, residue);
|
|
|
|
/* Again update before writing to FIFO to make sure isr sees. */
|
|
i2c->residue = 0;
|
|
i2c->cur_trans = NULL;
|
|
} else {
|
|
zx2967_i2c_writesb(i2c, buf, REG_DATA, I2C_FIFO_MAX);
|
|
i2c->residue -= I2C_FIFO_MAX;
|
|
i2c->cur_trans += I2C_FIFO_MAX;
|
|
}
|
|
|
|
barrier();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int zx2967_i2c_reset_hardware(struct zx2967_i2c *i2c)
|
|
{
|
|
u32 val;
|
|
u32 clk_div;
|
|
|
|
val = I2C_MASTER | I2C_IRQ_MSK_ENABLE;
|
|
zx2967_i2c_writel(i2c, val, REG_CMD);
|
|
|
|
clk_div = clk_get_rate(i2c->clk) / i2c->clk_freq - 1;
|
|
zx2967_i2c_writel(i2c, clk_div, REG_CLK_DIV_FS);
|
|
zx2967_i2c_writel(i2c, clk_div, REG_CLK_DIV_HS);
|
|
|
|
zx2967_i2c_writel(i2c, I2C_FIFO_MAX - 1, REG_WRCONF);
|
|
zx2967_i2c_writel(i2c, I2C_FIFO_MAX - 1, REG_RDCONF);
|
|
zx2967_i2c_writel(i2c, 1, REG_RDCONF);
|
|
|
|
zx2967_i2c_flush_fifos(i2c);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void zx2967_i2c_isr_clr(struct zx2967_i2c *i2c)
|
|
{
|
|
u32 status;
|
|
|
|
status = zx2967_i2c_readl(i2c, REG_STAT);
|
|
status |= I2C_IRQ_ACK_CLEAR;
|
|
zx2967_i2c_writel(i2c, status, REG_STAT);
|
|
}
|
|
|
|
static irqreturn_t zx2967_i2c_isr(int irq, void *dev_id)
|
|
{
|
|
u32 status;
|
|
struct zx2967_i2c *i2c = (struct zx2967_i2c *)dev_id;
|
|
|
|
status = zx2967_i2c_readl(i2c, REG_STAT) & I2C_INT_MASK;
|
|
zx2967_i2c_isr_clr(i2c);
|
|
|
|
if (status & I2C_SR_EDEVICE)
|
|
i2c->error = -ENXIO;
|
|
else if (status & I2C_SR_EDATA)
|
|
i2c->error = -EIO;
|
|
else if (status & I2C_TRANS_DONE)
|
|
i2c->error = 0;
|
|
else
|
|
goto done;
|
|
|
|
complete(&i2c->complete);
|
|
done:
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void zx2967_set_addr(struct zx2967_i2c *i2c, u16 addr)
|
|
{
|
|
u16 val;
|
|
|
|
val = (addr >> I2C_ADDR_LOW_SHIFT) & I2C_ADDR_LOW_MASK;
|
|
zx2967_i2c_writel(i2c, val, REG_DEVADDR_L);
|
|
|
|
val = (addr >> I2C_ADDR_HI_SHIFT) & I2C_ADDR_HI_MASK;
|
|
zx2967_i2c_writel(i2c, val, REG_DEVADDR_H);
|
|
if (val)
|
|
val = zx2967_i2c_readl(i2c, REG_CMD) | I2C_ADDR_MODE_TEN;
|
|
else
|
|
val = zx2967_i2c_readl(i2c, REG_CMD) & ~I2C_ADDR_MODE_TEN;
|
|
zx2967_i2c_writel(i2c, val, REG_CMD);
|
|
}
|
|
|
|
static int zx2967_i2c_xfer_bytes(struct zx2967_i2c *i2c, u32 bytes)
|
|
{
|
|
unsigned long time_left;
|
|
int rd = i2c->msg_rd;
|
|
int ret;
|
|
|
|
reinit_completion(&i2c->complete);
|
|
|
|
if (rd) {
|
|
zx2967_i2c_writel(i2c, bytes - 1, REG_RDCONF);
|
|
} else {
|
|
ret = zx2967_i2c_fill_tx_fifo(i2c);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
zx2967_i2c_start_ctrl(i2c);
|
|
|
|
time_left = wait_for_completion_timeout(&i2c->complete,
|
|
I2C_TIMEOUT);
|
|
if (time_left == 0)
|
|
return -ETIMEDOUT;
|
|
|
|
if (i2c->error)
|
|
return i2c->error;
|
|
|
|
return rd ? zx2967_i2c_empty_rx_fifo(i2c, bytes) : 0;
|
|
}
|
|
|
|
static int zx2967_i2c_xfer_msg(struct zx2967_i2c *i2c,
|
|
struct i2c_msg *msg)
|
|
{
|
|
int ret;
|
|
int i;
|
|
|
|
zx2967_i2c_flush_fifos(i2c);
|
|
|
|
i2c->cur_trans = msg->buf;
|
|
i2c->residue = msg->len;
|
|
i2c->access_cnt = msg->len / I2C_FIFO_MAX;
|
|
i2c->msg_rd = msg->flags & I2C_M_RD;
|
|
|
|
for (i = 0; i < i2c->access_cnt; i++) {
|
|
ret = zx2967_i2c_xfer_bytes(i2c, I2C_FIFO_MAX);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
if (i2c->residue > 0) {
|
|
ret = zx2967_i2c_xfer_bytes(i2c, i2c->residue);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
i2c->residue = 0;
|
|
i2c->access_cnt = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int zx2967_i2c_xfer(struct i2c_adapter *adap,
|
|
struct i2c_msg *msgs, int num)
|
|
{
|
|
struct zx2967_i2c *i2c = i2c_get_adapdata(adap);
|
|
int ret;
|
|
int i;
|
|
|
|
zx2967_set_addr(i2c, msgs->addr);
|
|
|
|
for (i = 0; i < num; i++) {
|
|
ret = zx2967_i2c_xfer_msg(i2c, &msgs[i]);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return num;
|
|
}
|
|
|
|
static void
|
|
zx2967_smbus_xfer_prepare(struct zx2967_i2c *i2c, u16 addr,
|
|
char read_write, u8 command, int size,
|
|
union i2c_smbus_data *data)
|
|
{
|
|
u32 val;
|
|
|
|
val = zx2967_i2c_readl(i2c, REG_RDCONF);
|
|
val |= I2C_RFIFO_RESET;
|
|
zx2967_i2c_writel(i2c, val, REG_RDCONF);
|
|
zx2967_set_addr(i2c, addr);
|
|
val = zx2967_i2c_readl(i2c, REG_CMD);
|
|
val &= ~I2C_RW_READ;
|
|
zx2967_i2c_writel(i2c, val, REG_CMD);
|
|
|
|
switch (size) {
|
|
case I2C_SMBUS_BYTE:
|
|
zx2967_i2c_writel(i2c, command, REG_DATA);
|
|
break;
|
|
case I2C_SMBUS_BYTE_DATA:
|
|
zx2967_i2c_writel(i2c, command, REG_DATA);
|
|
if (read_write == I2C_SMBUS_WRITE)
|
|
zx2967_i2c_writel(i2c, data->byte, REG_DATA);
|
|
break;
|
|
case I2C_SMBUS_WORD_DATA:
|
|
zx2967_i2c_writel(i2c, command, REG_DATA);
|
|
if (read_write == I2C_SMBUS_WRITE) {
|
|
zx2967_i2c_writel(i2c, (data->word >> 8), REG_DATA);
|
|
zx2967_i2c_writel(i2c, (data->word & 0xff),
|
|
REG_DATA);
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int zx2967_smbus_xfer_read(struct zx2967_i2c *i2c, int size,
|
|
union i2c_smbus_data *data)
|
|
{
|
|
unsigned long time_left;
|
|
u8 buf[2];
|
|
u32 val;
|
|
|
|
reinit_completion(&i2c->complete);
|
|
|
|
val = zx2967_i2c_readl(i2c, REG_CMD);
|
|
val |= I2C_CMB_RW_EN;
|
|
zx2967_i2c_writel(i2c, val, REG_CMD);
|
|
|
|
val = zx2967_i2c_readl(i2c, REG_CMD);
|
|
val |= I2C_START;
|
|
zx2967_i2c_writel(i2c, val, REG_CMD);
|
|
|
|
time_left = wait_for_completion_timeout(&i2c->complete,
|
|
I2C_TIMEOUT);
|
|
if (time_left == 0)
|
|
return -ETIMEDOUT;
|
|
|
|
if (i2c->error)
|
|
return i2c->error;
|
|
|
|
switch (size) {
|
|
case I2C_SMBUS_BYTE:
|
|
case I2C_SMBUS_BYTE_DATA:
|
|
val = zx2967_i2c_readl(i2c, REG_DATA);
|
|
data->byte = val;
|
|
break;
|
|
case I2C_SMBUS_WORD_DATA:
|
|
case I2C_SMBUS_PROC_CALL:
|
|
buf[0] = zx2967_i2c_readl(i2c, REG_DATA);
|
|
buf[1] = zx2967_i2c_readl(i2c, REG_DATA);
|
|
data->word = (buf[0] << 8) | buf[1];
|
|
break;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int zx2967_smbus_xfer_write(struct zx2967_i2c *i2c)
|
|
{
|
|
unsigned long time_left;
|
|
u32 val;
|
|
|
|
reinit_completion(&i2c->complete);
|
|
val = zx2967_i2c_readl(i2c, REG_CMD);
|
|
val |= I2C_START;
|
|
zx2967_i2c_writel(i2c, val, REG_CMD);
|
|
|
|
time_left = wait_for_completion_timeout(&i2c->complete,
|
|
I2C_TIMEOUT);
|
|
if (time_left == 0)
|
|
return -ETIMEDOUT;
|
|
|
|
if (i2c->error)
|
|
return i2c->error;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int zx2967_smbus_xfer(struct i2c_adapter *adap, u16 addr,
|
|
unsigned short flags, char read_write,
|
|
u8 command, int size, union i2c_smbus_data *data)
|
|
{
|
|
struct zx2967_i2c *i2c = i2c_get_adapdata(adap);
|
|
|
|
if (size == I2C_SMBUS_QUICK)
|
|
read_write = I2C_SMBUS_WRITE;
|
|
|
|
switch (size) {
|
|
case I2C_SMBUS_QUICK:
|
|
case I2C_SMBUS_BYTE:
|
|
case I2C_SMBUS_BYTE_DATA:
|
|
case I2C_SMBUS_WORD_DATA:
|
|
zx2967_smbus_xfer_prepare(i2c, addr, read_write,
|
|
command, size, data);
|
|
break;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
if (read_write == I2C_SMBUS_READ)
|
|
return zx2967_smbus_xfer_read(i2c, size, data);
|
|
|
|
return zx2967_smbus_xfer_write(i2c);
|
|
}
|
|
|
|
static u32 zx2967_i2c_func(struct i2c_adapter *adap)
|
|
{
|
|
return I2C_FUNC_I2C |
|
|
I2C_FUNC_SMBUS_QUICK |
|
|
I2C_FUNC_SMBUS_BYTE |
|
|
I2C_FUNC_SMBUS_BYTE_DATA |
|
|
I2C_FUNC_SMBUS_WORD_DATA |
|
|
I2C_FUNC_SMBUS_BLOCK_DATA |
|
|
I2C_FUNC_SMBUS_PROC_CALL |
|
|
I2C_FUNC_SMBUS_I2C_BLOCK;
|
|
}
|
|
|
|
static int __maybe_unused zx2967_i2c_suspend(struct device *dev)
|
|
{
|
|
struct zx2967_i2c *i2c = dev_get_drvdata(dev);
|
|
|
|
i2c_mark_adapter_suspended(&i2c->adap);
|
|
clk_disable_unprepare(i2c->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused zx2967_i2c_resume(struct device *dev)
|
|
{
|
|
struct zx2967_i2c *i2c = dev_get_drvdata(dev);
|
|
|
|
clk_prepare_enable(i2c->clk);
|
|
i2c_mark_adapter_resumed(&i2c->adap);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static SIMPLE_DEV_PM_OPS(zx2967_i2c_dev_pm_ops,
|
|
zx2967_i2c_suspend, zx2967_i2c_resume);
|
|
|
|
static const struct i2c_algorithm zx2967_i2c_algo = {
|
|
.master_xfer = zx2967_i2c_xfer,
|
|
.smbus_xfer = zx2967_smbus_xfer,
|
|
.functionality = zx2967_i2c_func,
|
|
};
|
|
|
|
static const struct i2c_adapter_quirks zx2967_i2c_quirks = {
|
|
.flags = I2C_AQ_NO_ZERO_LEN,
|
|
};
|
|
|
|
static const struct of_device_id zx2967_i2c_of_match[] = {
|
|
{ .compatible = "zte,zx296718-i2c", },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, zx2967_i2c_of_match);
|
|
|
|
static int zx2967_i2c_probe(struct platform_device *pdev)
|
|
{
|
|
struct zx2967_i2c *i2c;
|
|
void __iomem *reg_base;
|
|
struct resource *res;
|
|
struct clk *clk;
|
|
int ret;
|
|
|
|
i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL);
|
|
if (!i2c)
|
|
return -ENOMEM;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
reg_base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(reg_base))
|
|
return PTR_ERR(reg_base);
|
|
|
|
clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(clk)) {
|
|
dev_err(&pdev->dev, "missing controller clock");
|
|
return PTR_ERR(clk);
|
|
}
|
|
|
|
ret = clk_prepare_enable(clk);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to enable i2c_clk\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = device_property_read_u32(&pdev->dev, "clock-frequency",
|
|
&i2c->clk_freq);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "missing clock-frequency");
|
|
return ret;
|
|
}
|
|
|
|
ret = platform_get_irq(pdev, 0);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
i2c->irq = ret;
|
|
i2c->reg_base = reg_base;
|
|
i2c->clk = clk;
|
|
|
|
init_completion(&i2c->complete);
|
|
platform_set_drvdata(pdev, i2c);
|
|
|
|
ret = zx2967_i2c_reset_hardware(i2c);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to initialize i2c controller\n");
|
|
goto err_clk_unprepare;
|
|
}
|
|
|
|
ret = devm_request_irq(&pdev->dev, i2c->irq,
|
|
zx2967_i2c_isr, 0, dev_name(&pdev->dev), i2c);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to request irq %i\n", i2c->irq);
|
|
goto err_clk_unprepare;
|
|
}
|
|
|
|
i2c_set_adapdata(&i2c->adap, i2c);
|
|
strlcpy(i2c->adap.name, "zx2967 i2c adapter",
|
|
sizeof(i2c->adap.name));
|
|
i2c->adap.algo = &zx2967_i2c_algo;
|
|
i2c->adap.quirks = &zx2967_i2c_quirks;
|
|
i2c->adap.nr = pdev->id;
|
|
i2c->adap.dev.parent = &pdev->dev;
|
|
i2c->adap.dev.of_node = pdev->dev.of_node;
|
|
|
|
ret = i2c_add_numbered_adapter(&i2c->adap);
|
|
if (ret)
|
|
goto err_clk_unprepare;
|
|
|
|
return 0;
|
|
|
|
err_clk_unprepare:
|
|
clk_disable_unprepare(i2c->clk);
|
|
return ret;
|
|
}
|
|
|
|
static int zx2967_i2c_remove(struct platform_device *pdev)
|
|
{
|
|
struct zx2967_i2c *i2c = platform_get_drvdata(pdev);
|
|
|
|
i2c_del_adapter(&i2c->adap);
|
|
clk_disable_unprepare(i2c->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver zx2967_i2c_driver = {
|
|
.probe = zx2967_i2c_probe,
|
|
.remove = zx2967_i2c_remove,
|
|
.driver = {
|
|
.name = "zx2967_i2c",
|
|
.of_match_table = zx2967_i2c_of_match,
|
|
.pm = &zx2967_i2c_dev_pm_ops,
|
|
},
|
|
};
|
|
module_platform_driver(zx2967_i2c_driver);
|
|
|
|
MODULE_AUTHOR("Baoyou Xie <baoyou.xie@linaro.org>");
|
|
MODULE_DESCRIPTION("ZTE ZX2967 I2C Bus Controller driver");
|
|
MODULE_LICENSE("GPL v2");
|