AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-21 14:09:55 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
d592974f8c
linux_dsm_epyc7002/drivers/pwm/pwm-lpc18xx-sct.c
Uwe Kleine-König f82d15e223 pwm: lpc18xx-sct: Don't reconfigure PWM in .request and .free 
Regarding the .request case: The consumer might be interested in taking
over the configured state from the boot loader. So the initially
configured state should be retained.

For the free case the PWM consumer is responsible for disabling the PWM
before calling pwm_put() and there are three subcases to consider:

 a) The PWM is already off. Then there is no gain in disabling the PWM
    once more.
 b) The PWM is still running and there is a good reason for that. (Not
    sure this is a valid case, I cannot imagine such a good reason.)
    Then it is counterproductive to disable the PWM.
 c) The PWM is still running because the consumer failed to disable the
    PWM. Then the consumer needs fixing and there is little incentive to
    paper over the problem in the backend driver.

This aligns the lpc18xx-sct driver to the other PWM drivers that also
don't reconfigure the hardware in .request and .free.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-11-16 11:02:47 +01:00

472 lines
14 KiB
C
Raw Blame History

/*
* NXP LPC18xx State Configurable Timer - Pulse Width Modulator driver
*
* Copyright (c) 2015 Ariel D'Alessandro <ariel@vanguardiasur.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License.
*
* Notes
* =====
* NXP LPC18xx provides a State Configurable Timer (SCT) which can be configured
* as a Pulse Width Modulator.
*
* SCT supports 16 outputs, 16 events and 16 registers. Each event will be
* triggered when its related register matches the SCT counter value, and it
* will set or clear a selected output.
*
* One of the events is preselected to generate the period, thus the maximum
* number of simultaneous channels is limited to 15. Notice that period is
* global to all the channels, thus PWM driver will refuse setting different
* values to it, unless there's only one channel requested.
*/
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/pwm.h>
/* LPC18xx SCT registers */
#define LPC18XX_PWM_CONFIG 0x000
#define LPC18XX_PWM_CONFIG_UNIFY BIT(0)
#define LPC18XX_PWM_CONFIG_NORELOAD BIT(7)
#define LPC18XX_PWM_CTRL 0x004
#define LPC18XX_PWM_CTRL_HALT BIT(2)
#define LPC18XX_PWM_BIDIR BIT(4)
#define LPC18XX_PWM_PRE_SHIFT 5
#define LPC18XX_PWM_PRE_MASK (0xff << LPC18XX_PWM_PRE_SHIFT)
#define LPC18XX_PWM_PRE(x) (x << LPC18XX_PWM_PRE_SHIFT)
#define LPC18XX_PWM_LIMIT 0x008
#define LPC18XX_PWM_RES_BASE 0x058
#define LPC18XX_PWM_RES_SHIFT(_ch) (_ch * 2)
#define LPC18XX_PWM_RES(_ch, _action) (_action << LPC18XX_PWM_RES_SHIFT(_ch))
#define LPC18XX_PWM_RES_MASK(_ch) (0x3 << LPC18XX_PWM_RES_SHIFT(_ch))
#define LPC18XX_PWM_MATCH_BASE 0x100
#define LPC18XX_PWM_MATCH(_ch) (LPC18XX_PWM_MATCH_BASE + _ch * 4)
#define LPC18XX_PWM_MATCHREL_BASE 0x200
#define LPC18XX_PWM_MATCHREL(_ch) (LPC18XX_PWM_MATCHREL_BASE + _ch * 4)
#define LPC18XX_PWM_EVSTATEMSK_BASE 0x300
#define LPC18XX_PWM_EVSTATEMSK(_ch) (LPC18XX_PWM_EVSTATEMSK_BASE + _ch * 8)
#define LPC18XX_PWM_EVSTATEMSK_ALL 0xffffffff
#define LPC18XX_PWM_EVCTRL_BASE 0x304
#define LPC18XX_PWM_EVCTRL(_ev) (LPC18XX_PWM_EVCTRL_BASE + _ev * 8)
#define LPC18XX_PWM_EVCTRL_MATCH(_ch) _ch
#define LPC18XX_PWM_EVCTRL_COMB_SHIFT 12
#define LPC18XX_PWM_EVCTRL_COMB_MATCH (0x1 << LPC18XX_PWM_EVCTRL_COMB_SHIFT)
#define LPC18XX_PWM_OUTPUTSET_BASE 0x500
#define LPC18XX_PWM_OUTPUTSET(_ch) (LPC18XX_PWM_OUTPUTSET_BASE + _ch * 8)
#define LPC18XX_PWM_OUTPUTCL_BASE 0x504
#define LPC18XX_PWM_OUTPUTCL(_ch) (LPC18XX_PWM_OUTPUTCL_BASE + _ch * 8)
/* LPC18xx SCT unified counter */
#define LPC18XX_PWM_TIMER_MAX 0xffffffff
/* LPC18xx SCT events */
#define LPC18XX_PWM_EVENT_PERIOD 0
#define LPC18XX_PWM_EVENT_MAX 16
/* SCT conflict resolution */
enum lpc18xx_pwm_res_action {
LPC18XX_PWM_RES_NONE,
LPC18XX_PWM_RES_SET,
LPC18XX_PWM_RES_CLEAR,
LPC18XX_PWM_RES_TOGGLE,
};
struct lpc18xx_pwm_data {
unsigned int duty_event;
};
struct lpc18xx_pwm_chip {
struct device *dev;
struct pwm_chip chip;
void __iomem *base;
struct clk *pwm_clk;
unsigned long clk_rate;
unsigned int period_ns;
unsigned int min_period_ns;
unsigned int max_period_ns;
unsigned int period_event;
unsigned long event_map;
struct mutex res_lock;
struct mutex period_lock;
};
static inline struct lpc18xx_pwm_chip *
to_lpc18xx_pwm_chip(struct pwm_chip *chip)
{
return container_of(chip, struct lpc18xx_pwm_chip, chip);
}
static inline void lpc18xx_pwm_writel(struct lpc18xx_pwm_chip *lpc18xx_pwm,
u32 reg, u32 val)
{
writel(val, lpc18xx_pwm->base + reg);
}
static inline u32 lpc18xx_pwm_readl(struct lpc18xx_pwm_chip *lpc18xx_pwm,
u32 reg)
{
return readl(lpc18xx_pwm->base + reg);
}
static void lpc18xx_pwm_set_conflict_res(struct lpc18xx_pwm_chip *lpc18xx_pwm,
struct pwm_device *pwm,
enum lpc18xx_pwm_res_action action)
{
u32 val;
mutex_lock(&lpc18xx_pwm->res_lock);
/*
* Simultaneous set and clear may happen on an output, that is the case
* when duty_ns == period_ns. LPC18xx SCT allows to set a conflict
* resolution action to be taken in such a case.
*/
val = lpc18xx_pwm_readl(lpc18xx_pwm, LPC18XX_PWM_RES_BASE);
val &= ~LPC18XX_PWM_RES_MASK(pwm->hwpwm);
val |= LPC18XX_PWM_RES(pwm->hwpwm, action);
lpc18xx_pwm_writel(lpc18xx_pwm, LPC18XX_PWM_RES_BASE, val);
mutex_unlock(&lpc18xx_pwm->res_lock);
}
static void lpc18xx_pwm_config_period(struct pwm_chip *chip, int period_ns)
{
struct lpc18xx_pwm_chip *lpc18xx_pwm = to_lpc18xx_pwm_chip(chip);
u64 val;
val = (u64)period_ns * lpc18xx_pwm->clk_rate;
do_div(val, NSEC_PER_SEC);
lpc18xx_pwm_writel(lpc18xx_pwm,
LPC18XX_PWM_MATCH(lpc18xx_pwm->period_event),
(u32)val - 1);
lpc18xx_pwm_writel(lpc18xx_pwm,
LPC18XX_PWM_MATCHREL(lpc18xx_pwm->period_event),
(u32)val - 1);
}
static void lpc18xx_pwm_config_duty(struct pwm_chip *chip,
struct pwm_device *pwm, int duty_ns)
{
struct lpc18xx_pwm_chip *lpc18xx_pwm = to_lpc18xx_pwm_chip(chip);
struct lpc18xx_pwm_data *lpc18xx_data = pwm_get_chip_data(pwm);
u64 val;
val = (u64)duty_ns * lpc18xx_pwm->clk_rate;
do_div(val, NSEC_PER_SEC);
lpc18xx_pwm_writel(lpc18xx_pwm,
LPC18XX_PWM_MATCH(lpc18xx_data->duty_event),
(u32)val);
lpc18xx_pwm_writel(lpc18xx_pwm,
LPC18XX_PWM_MATCHREL(lpc18xx_data->duty_event),
(u32)val);
}
static int lpc18xx_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
int duty_ns, int period_ns)
{
struct lpc18xx_pwm_chip *lpc18xx_pwm = to_lpc18xx_pwm_chip(chip);
int requested_events, i;
if (period_ns < lpc18xx_pwm->min_period_ns ||
period_ns > lpc18xx_pwm->max_period_ns) {
dev_err(chip->dev, "period %d not in range\n", period_ns);
return -ERANGE;
}
mutex_lock(&lpc18xx_pwm->period_lock);
requested_events = bitmap_weight(&lpc18xx_pwm->event_map,
LPC18XX_PWM_EVENT_MAX);
/*
* The PWM supports only a single period for all PWM channels.
* Once the period is set, it can only be changed if no more than one
* channel is requested at that moment.
*/
if (requested_events > 2 && lpc18xx_pwm->period_ns != period_ns &&
lpc18xx_pwm->period_ns) {
dev_err(chip->dev, "conflicting period requested for PWM %u\n",
pwm->hwpwm);
mutex_unlock(&lpc18xx_pwm->period_lock);
return -EBUSY;
}
if ((requested_events <= 2 && lpc18xx_pwm->period_ns != period_ns) ||
!lpc18xx_pwm->period_ns) {
lpc18xx_pwm->period_ns = period_ns;
for (i = 0; i < chip->npwm; i++)
pwm_set_period(&chip->pwms[i], period_ns);
lpc18xx_pwm_config_period(chip, period_ns);
}
mutex_unlock(&lpc18xx_pwm->period_lock);
lpc18xx_pwm_config_duty(chip, pwm, duty_ns);
return 0;
}
static int lpc18xx_pwm_set_polarity(struct pwm_chip *chip,
struct pwm_device *pwm,
enum pwm_polarity polarity)
{
return 0;
}
static int lpc18xx_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
{
struct lpc18xx_pwm_chip *lpc18xx_pwm = to_lpc18xx_pwm_chip(chip);
struct lpc18xx_pwm_data *lpc18xx_data = pwm_get_chip_data(pwm);
enum lpc18xx_pwm_res_action res_action;
unsigned int set_event, clear_event;
lpc18xx_pwm_writel(lpc18xx_pwm,
LPC18XX_PWM_EVCTRL(lpc18xx_data->duty_event),
LPC18XX_PWM_EVCTRL_MATCH(lpc18xx_data->duty_event) |
LPC18XX_PWM_EVCTRL_COMB_MATCH);
lpc18xx_pwm_writel(lpc18xx_pwm,
LPC18XX_PWM_EVSTATEMSK(lpc18xx_data->duty_event),
LPC18XX_PWM_EVSTATEMSK_ALL);
if (pwm_get_polarity(pwm) == PWM_POLARITY_NORMAL) {
set_event = lpc18xx_pwm->period_event;
clear_event = lpc18xx_data->duty_event;
res_action = LPC18XX_PWM_RES_SET;
} else {
set_event = lpc18xx_data->duty_event;
clear_event = lpc18xx_pwm->period_event;
res_action = LPC18XX_PWM_RES_CLEAR;
}
lpc18xx_pwm_writel(lpc18xx_pwm, LPC18XX_PWM_OUTPUTSET(pwm->hwpwm),
BIT(set_event));
lpc18xx_pwm_writel(lpc18xx_pwm, LPC18XX_PWM_OUTPUTCL(pwm->hwpwm),
BIT(clear_event));
lpc18xx_pwm_set_conflict_res(lpc18xx_pwm, pwm, res_action);
return 0;
}
static void lpc18xx_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
{
struct lpc18xx_pwm_chip *lpc18xx_pwm = to_lpc18xx_pwm_chip(chip);
struct lpc18xx_pwm_data *lpc18xx_data = pwm_get_chip_data(pwm);
lpc18xx_pwm_writel(lpc18xx_pwm,
LPC18XX_PWM_EVCTRL(lpc18xx_data->duty_event), 0);
lpc18xx_pwm_writel(lpc18xx_pwm, LPC18XX_PWM_OUTPUTSET(pwm->hwpwm), 0);
lpc18xx_pwm_writel(lpc18xx_pwm, LPC18XX_PWM_OUTPUTCL(pwm->hwpwm), 0);
}
static int lpc18xx_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
{
struct lpc18xx_pwm_chip *lpc18xx_pwm = to_lpc18xx_pwm_chip(chip);
struct lpc18xx_pwm_data *lpc18xx_data = pwm_get_chip_data(pwm);
unsigned long event;
event = find_first_zero_bit(&lpc18xx_pwm->event_map,
LPC18XX_PWM_EVENT_MAX);
if (event >= LPC18XX_PWM_EVENT_MAX) {
dev_err(lpc18xx_pwm->dev,
"maximum number of simultaneous channels reached\n");
return -EBUSY;
};
set_bit(event, &lpc18xx_pwm->event_map);
lpc18xx_data->duty_event = event;
return 0;
}
static void lpc18xx_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
{
struct lpc18xx_pwm_chip *lpc18xx_pwm = to_lpc18xx_pwm_chip(chip);
struct lpc18xx_pwm_data *lpc18xx_data = pwm_get_chip_data(pwm);
clear_bit(lpc18xx_data->duty_event, &lpc18xx_pwm->event_map);
}
static const struct pwm_ops lpc18xx_pwm_ops = {
.config = lpc18xx_pwm_config,
.set_polarity = lpc18xx_pwm_set_polarity,
.enable = lpc18xx_pwm_enable,
.disable = lpc18xx_pwm_disable,
.request = lpc18xx_pwm_request,
.free = lpc18xx_pwm_free,
.owner = THIS_MODULE,
};
static const struct of_device_id lpc18xx_pwm_of_match[] = {
{ .compatible = "nxp,lpc1850-sct-pwm" },
{}
};
MODULE_DEVICE_TABLE(of, lpc18xx_pwm_of_match);
static int lpc18xx_pwm_probe(struct platform_device *pdev)
{
struct lpc18xx_pwm_chip *lpc18xx_pwm;
struct pwm_device *pwm;
struct resource *res;
int ret, i;
u64 val;
lpc18xx_pwm = devm_kzalloc(&pdev->dev, sizeof(*lpc18xx_pwm),
GFP_KERNEL);
if (!lpc18xx_pwm)
return -ENOMEM;
lpc18xx_pwm->dev = &pdev->dev;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
lpc18xx_pwm->base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(lpc18xx_pwm->base))
return PTR_ERR(lpc18xx_pwm->base);
lpc18xx_pwm->pwm_clk = devm_clk_get(&pdev->dev, "pwm");
if (IS_ERR(lpc18xx_pwm->pwm_clk)) {
dev_err(&pdev->dev, "failed to get pwm clock\n");
return PTR_ERR(lpc18xx_pwm->pwm_clk);
}
ret = clk_prepare_enable(lpc18xx_pwm->pwm_clk);
if (ret < 0) {
dev_err(&pdev->dev, "could not prepare or enable pwm clock\n");
return ret;
}
lpc18xx_pwm->clk_rate = clk_get_rate(lpc18xx_pwm->pwm_clk);
if (!lpc18xx_pwm->clk_rate) {
dev_err(&pdev->dev, "pwm clock has no frequency\n");
ret = -EINVAL;
goto disable_pwmclk;
}
mutex_init(&lpc18xx_pwm->res_lock);
mutex_init(&lpc18xx_pwm->period_lock);
val = (u64)NSEC_PER_SEC * LPC18XX_PWM_TIMER_MAX;
do_div(val, lpc18xx_pwm->clk_rate);
lpc18xx_pwm->max_period_ns = val;
lpc18xx_pwm->min_period_ns = DIV_ROUND_UP(NSEC_PER_SEC,
lpc18xx_pwm->clk_rate);
lpc18xx_pwm->chip.dev = &pdev->dev;
lpc18xx_pwm->chip.ops = &lpc18xx_pwm_ops;
lpc18xx_pwm->chip.base = -1;
lpc18xx_pwm->chip.npwm = 16;
lpc18xx_pwm->chip.of_xlate = of_pwm_xlate_with_flags;
lpc18xx_pwm->chip.of_pwm_n_cells = 3;
/* SCT counter must be in unify (32 bit) mode */
lpc18xx_pwm_writel(lpc18xx_pwm, LPC18XX_PWM_CONFIG,
LPC18XX_PWM_CONFIG_UNIFY);
/*
* Everytime the timer counter reaches the period value, the related
* event will be triggered and the counter reset to 0.
*/
set_bit(LPC18XX_PWM_EVENT_PERIOD, &lpc18xx_pwm->event_map);
lpc18xx_pwm->period_event = LPC18XX_PWM_EVENT_PERIOD;
lpc18xx_pwm_writel(lpc18xx_pwm,
LPC18XX_PWM_EVSTATEMSK(lpc18xx_pwm->period_event),
LPC18XX_PWM_EVSTATEMSK_ALL);
val = LPC18XX_PWM_EVCTRL_MATCH(lpc18xx_pwm->period_event) |
LPC18XX_PWM_EVCTRL_COMB_MATCH;
lpc18xx_pwm_writel(lpc18xx_pwm,
LPC18XX_PWM_EVCTRL(lpc18xx_pwm->period_event), val);
lpc18xx_pwm_writel(lpc18xx_pwm, LPC18XX_PWM_LIMIT,
BIT(lpc18xx_pwm->period_event));
ret = pwmchip_add(&lpc18xx_pwm->chip);
if (ret < 0) {
dev_err(&pdev->dev, "pwmchip_add failed: %d\n", ret);
goto disable_pwmclk;
}
for (i = 0; i < lpc18xx_pwm->chip.npwm; i++) {
struct lpc18xx_pwm_data *data;
pwm = &lpc18xx_pwm->chip.pwms[i];
data = devm_kzalloc(lpc18xx_pwm->dev, sizeof(*data),
GFP_KERNEL);
if (!data) {
ret = -ENOMEM;
goto remove_pwmchip;
}
pwm_set_chip_data(pwm, data);
}
platform_set_drvdata(pdev, lpc18xx_pwm);
val = lpc18xx_pwm_readl(lpc18xx_pwm, LPC18XX_PWM_CTRL);
val &= ~LPC18XX_PWM_BIDIR;
val &= ~LPC18XX_PWM_CTRL_HALT;
val &= ~LPC18XX_PWM_PRE_MASK;
val |= LPC18XX_PWM_PRE(0);
lpc18xx_pwm_writel(lpc18xx_pwm, LPC18XX_PWM_CTRL, val);
return 0;
remove_pwmchip:
pwmchip_remove(&lpc18xx_pwm->chip);
disable_pwmclk:
clk_disable_unprepare(lpc18xx_pwm->pwm_clk);
return ret;
}
static int lpc18xx_pwm_remove(struct platform_device *pdev)
{
struct lpc18xx_pwm_chip *lpc18xx_pwm = platform_get_drvdata(pdev);
u32 val;
val = lpc18xx_pwm_readl(lpc18xx_pwm, LPC18XX_PWM_CTRL);
lpc18xx_pwm_writel(lpc18xx_pwm, LPC18XX_PWM_CTRL,
val | LPC18XX_PWM_CTRL_HALT);
clk_disable_unprepare(lpc18xx_pwm->pwm_clk);
return pwmchip_remove(&lpc18xx_pwm->chip);
}
static struct platform_driver lpc18xx_pwm_driver = {
.driver = {
.name = "lpc18xx-sct-pwm",
.of_match_table = lpc18xx_pwm_of_match,
},
.probe = lpc18xx_pwm_probe,
.remove = lpc18xx_pwm_remove,
};
module_platform_driver(lpc18xx_pwm_driver);
MODULE_AUTHOR("Ariel D'Alessandro <ariel@vanguardiasur.com.ar>");
MODULE_DESCRIPTION("NXP LPC18xx PWM driver");
MODULE_LICENSE("GPL v2");
Reference in New Issue View Git Blame Copy Permalink