mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-05 11:06:40 +07:00
fc8f2a7608
Commit 461c317705eca5cac09a360f488715927fd0a927(into 2.6.36-v3) is put forward to power down phy if no usb cable is connected, but does introduce the two issues below: 1), phy is not into work state if usb cable is connected with PC during poweron, so musb device mode is not usable in such case, follows the reasons: -twl4030_phy_resume is not called, so regulators are not enabled i2c access are not enabled usb mode not configurated 2), The kernel warings[1] of regulators 'unbalanced disables' is caused if poweron without usb cable connected with PC or b-device. This patch fixes the two issues above: -power down phy only if no usb cable is connected with PC and b-device -do phy initialization(via __twl4030_phy_resume) if usb cable is connected with PC(vbus event) or another b-device(ID event) in twl4030_usb_probe. This patch also doesn't put VUSB3V1 LDO into active mode in twl4030_usb_ldo_init until VBUS/ID change detected, so we can save more power consumption than before. This patch is verified OK on Beagle board either connected with usb cable or not when poweron. [1]. warnings of 'unbalanced disables' of regulators. [root@OMAP3EVM /]# dmesg ------------[ cut here ]------------ WARNING: at drivers/regulator/core.c:1357 _regulator_disable+0x38/0x128() unbalanced disables for VUSB1V8 Modules linked in: Backtrace: [<c0030c48>] (dump_backtrace+0x0/0x110) from [<c034f5a8>] (dump_stack+0x18/0x1c) r7:c78179d8 r6:c01ed6b8 r5:c0410822 r4:0000054d [<c034f590>] (dump_stack+0x0/0x1c) from [<c0057da8>] (warn_slowpath_common+0x54/0x6c) [<c0057d54>] (warn_slowpath_common+0x0/0x6c) from [<c0057e64>] (warn_slowpath_fmt+0x38/0x40) r9:00000000 r8:00000000 r7:c78e6608 r6:00000000 r5:fffffffb r4:c78e6c00 [<c0057e2c>] (warn_slowpath_fmt+0x0/0x40) from [<c01ed6b8>] (_regulator_disable+0x38/0x128) r3:c0410e53 r2:c0410ad5 [<c01ed680>] (_regulator_disable+0x0/0x128) from [<c01ed87c>] (regulator_disable+0x24/0x38) r7:c78e6608 r6:00000000 r5:c78e6c40 r4:c78e6c00 [<c01ed858>] (regulator_disable+0x0/0x38) from [<c02382dc>] (twl4030_phy_power+0x15c/0x17c) r5:c78595c0 r4:00000000 [<c0238180>] (twl4030_phy_power+0x0/0x17c) from [<c023831c>] (twl4030_phy_suspend+0x20/0x2c) r6:00000000 r5:c78595c0 r4:c78595c0 [<c02382fc>] (twl4030_phy_suspend+0x0/0x2c) from [<c0238638>] (twl4030_usb_irq+0x11c/0x16c) r5:c78595c0 r4:00000040 [<c023851c>] (twl4030_usb_irq+0x0/0x16c) from [<c034ec18>] (twl4030_usb_probe+0x2c4/0x32c) r6:00000000 r5:00000000 r4:c78595c0 [<c034e954>] (twl4030_usb_probe+0x0/0x32c) from [<c02152a0>] (platform_drv_probe+0x20/0x24) r7:00000000 r6:c047d49c r5:c78e6608 r4:c047d49c [<c0215280>] (platform_drv_probe+0x0/0x24) from [<c0214244>] (driver_probe_device+0xd0/0x190) [<c0214174>] (driver_probe_device+0x0/0x190) from [<c02143d4>] (__device_attach+0x44/0x48) r7:00000000 r6:c78e6608 r5:c78e6608 r4:c047d49c [<c0214390>] (__device_attach+0x0/0x48) from [<c0213694>] (bus_for_each_drv+0x50/0x90) r5:c0214390 r4:00000000 [<c0213644>] (bus_for_each_drv+0x0/0x90) from [<c0214474>] (device_attach+0x70/0x94) r6:c78e663c r5:c78e6608 r4:c78e6608 [<c0214404>] (device_attach+0x0/0x94) from [<c02134fc>] (bus_probe_device+0x2c/0x48) r7:00000000 r6:00000002 r5:c78e6608 r4:c78e6600 [<c02134d0>] (bus_probe_device+0x0/0x48) from [<c0211e48>] (device_add+0x340/0x4b4) [<c0211b08>] (device_add+0x0/0x4b4) from [<c021597c>] (platform_device_add+0x110/0x16c) [<c021586c>] (platform_device_add+0x0/0x16c) from [<c0220cb0>] (add_numbered_child+0xd8/0x118) r7:00000000 r6:c045f15c r5:c78e6600 r4:00000000 [<c0220bd8>] (add_numbered_child+0x0/0x118) from [<c001c618>] (twl_probe+0x3a4/0x72c) [<c001c274>] (twl_probe+0x0/0x72c) from [<c02601ac>] (i2c_device_probe+0x7c/0xa4) [<c0260130>] (i2c_device_probe+0x0/0xa4) from [<c0214244>] (driver_probe_device+0xd0/0x190) r5:c7856e20 r4:c047c860 [<c0214174>] (driver_probe_device+0x0/0x190) from [<c02143d4>] (__device_attach+0x44/0x48) r7:c7856e04 r6:c7856e20 r5:c7856e20 r4:c047c860 [<c0214390>] (__device_attach+0x0/0x48) from [<c0213694>] (bus_for_each_drv+0x50/0x90) r5:c0214390 r4:00000000 [<c0213644>] (bus_for_each_drv+0x0/0x90) from [<c0214474>] (device_attach+0x70/0x94) r6:c7856e54 r5:c7856e20 r4:c7856e20 [<c0214404>] (device_attach+0x0/0x94) from [<c02134fc>] (bus_probe_device+0x2c/0x48) r7:c7856e04 r6:c78fd048 r5:c7856e20 r4:c7856e20 [<c02134d0>] (bus_probe_device+0x0/0x48) from [<c0211e48>] (device_add+0x340/0x4b4) [<c0211b08>] (device_add+0x0/0x4b4) from [<c0211fd8>] (device_register+0x1c/0x20) [<c0211fbc>] (device_register+0x0/0x20) from [<c0260aa8>] (i2c_new_device+0xec/0x150) r5:c7856e00 r4:c7856e20 [<c02609bc>] (i2c_new_device+0x0/0x150) from [<c0260dc0>] (i2c_register_adapter+0xa0/0x1c4) r7:00000000 r6:c78fd078 r5:c78fd048 r4:c781d5c0 [<c0260d20>] (i2c_register_adapter+0x0/0x1c4) from [<c0260f80>] (i2c_add_numbered_adapter+0x9c/0xb4) r7:00000a28 r6:c04600a8 r5:c78fd048 r4:00000000 [<c0260ee4>] (i2c_add_numbered_adapter+0x0/0xb4) from [<c034efa4>] (omap_i2c_probe+0x324/0x3e8) r5:00000000 r4:c78fd000 [<c034ec80>] (omap_i2c_probe+0x0/0x3e8) from [<c02152a0>] (platform_drv_probe+0x20/0x24) [<c0215280>] (platform_drv_probe+0x0/0x24) from [<c0214244>] (driver_probe_device+0xd0/0x190) [<c0214174>] (driver_probe_device+0x0/0x190) from [<c021436c>] (__driver_attach+0x68/0x8c) r7:c78b2140 r6:c047e214 r5:c04600e4 r4:c04600b0 [<c0214304>] (__driver_attach+0x0/0x8c) from [<c021399c>] (bus_for_each_dev+0x50/0x84) r7:c78b2140 r6:c047e214 r5:c0214304 r4:00000000 [<c021394c>] (bus_for_each_dev+0x0/0x84) from [<c0214068>] (driver_attach+0x20/0x28) r6:c047e214 r5:c047e214 r4:c00270d0 [<c0214048>] (driver_attach+0x0/0x28) from [<c0213274>] (bus_add_driver+0xa8/0x228) [<c02131cc>] (bus_add_driver+0x0/0x228) from [<c02146a4>] (driver_register+0xb0/0x13c) [<c02145f4>] (driver_register+0x0/0x13c) from [<c0215744>] (platform_driver_register+0x4c/0x60) r9:00000000 r8:c001f688 r7:00000013 r6:c005b6fc r5:c00083dc r4:c00270d0 [<c02156f8>] (platform_driver_register+0x0/0x60) from [<c001f69c>] (omap_i2c_init_driver+0x14/0x1c) [<c001f688>] (omap_i2c_init_driver+0x0/0x1c) from [<c002c460>] (do_one_initcall+0xd0/0x1a4) [<c002c390>] (do_one_initcall+0x0/0x1a4) from [<c0008478>] (kernel_init+0x9c/0x154) [<c00083dc>] (kernel_init+0x0/0x154) from [<c005b6fc>] (do_exit+0x0/0x688) r5:c00083dc r4:00000000 ---[ end trace 1b75b31a2719ed1d ]--- Signed-off-by: Ming Lei <tom.leiming@gmail.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Felipe Balbi <me@felipebalbi.com> Cc: Anand Gadiyar <gadiyar@ti.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> |
||
---|---|---|
.. | ||
gpio_vbus.c | ||
isp1301_omap.c | ||
Kconfig | ||
Makefile | ||
nop-usb-xceiv.c | ||
otg.c | ||
twl4030-usb.c | ||
ulpi.c |