AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-28 11:18:45 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
d4f90d9dca
linux_dsm_epyc7002/drivers/scsi/qla2xxx/qla_init.c
Chad Dupuis 080c9517ea qla2xxx: Set relogin flag when we fail to queue login requests. 
If we fail to queue an srb for an async login we should set the
relogin flag so it will be retried as the reason for the queuing
failure was most likely transient.  Failure to do this can lead to
failed paths as login is never retried if the relogin flag is not
set.

Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23 21:27:02 -05:00

6701 lines
174 KiB
C
Raw Blame History

/*
* QLogic Fibre Channel HBA Driver
* Copyright (c) 2003-2014 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
#include "qla_def.h"
#include "qla_gbl.h"
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include "qla_devtbl.h"
#ifdef CONFIG_SPARC
#include <asm/prom.h>
#endif
#include <target/target_core_base.h>
#include "qla_target.h"
/*
* QLogic ISP2x00 Hardware Support Function Prototypes.
*/
static int qla2x00_isp_firmware(scsi_qla_host_t *);
static int qla2x00_setup_chip(scsi_qla_host_t *);
static int qla2x00_fw_ready(scsi_qla_host_t *);
static int qla2x00_configure_hba(scsi_qla_host_t *);
static int qla2x00_configure_loop(scsi_qla_host_t *);
static int qla2x00_configure_local_loop(scsi_qla_host_t *);
static int qla2x00_configure_fabric(scsi_qla_host_t *);
static int qla2x00_find_all_fabric_devs(scsi_qla_host_t *, struct list_head *);
static int qla2x00_fabric_dev_login(scsi_qla_host_t *, fc_port_t *,
uint16_t *);
static int qla2x00_restart_isp(scsi_qla_host_t *);
static struct qla_chip_state_84xx *qla84xx_get_chip(struct scsi_qla_host *);
static int qla84xx_init_chip(scsi_qla_host_t *);
static int qla25xx_init_queues(struct qla_hw_data *);
/* SRB Extensions ---------------------------------------------------------- */
void
qla2x00_sp_timeout(unsigned long __data)
{
srb_t *sp = (srb_t *)__data;
struct srb_iocb *iocb;
fc_port_t *fcport = sp->fcport;
struct qla_hw_data *ha = fcport->vha->hw;
struct req_que *req;
unsigned long flags;
spin_lock_irqsave(&ha->hardware_lock, flags);
req = ha->req_q_map[0];
req->outstanding_cmds[sp->handle] = NULL;
iocb = &sp->u.iocb_cmd;
iocb->timeout(sp);
sp->free(fcport->vha, sp);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
}
void
qla2x00_sp_free(void *data, void *ptr)
{
srb_t *sp = (srb_t *)ptr;
struct srb_iocb *iocb = &sp->u.iocb_cmd;
struct scsi_qla_host *vha = (scsi_qla_host_t *)data;
del_timer(&iocb->timer);
qla2x00_rel_sp(vha, sp);
}
/* Asynchronous Login/Logout Routines -------------------------------------- */
unsigned long
qla2x00_get_async_timeout(struct scsi_qla_host *vha)
{
unsigned long tmo;
struct qla_hw_data *ha = vha->hw;
/* Firmware should use switch negotiated r_a_tov for timeout. */
tmo = ha->r_a_tov / 10 * 2;
if (IS_QLAFX00(ha)) {
tmo = FX00_DEF_RATOV * 2;
} else if (!IS_FWI2_CAPABLE(ha)) {
/*
* Except for earlier ISPs where the timeout is seeded from the
* initialization control block.
*/
tmo = ha->login_timeout;
}
return tmo;
}
static void
qla2x00_async_iocb_timeout(void *data)
{
srb_t *sp = (srb_t *)data;
fc_port_t *fcport = sp->fcport;
ql_dbg(ql_dbg_disc, fcport->vha, 0x2071,
"Async-%s timeout - hdl=%x portid=%02x%02x%02x.\n",
sp->name, sp->handle, fcport->d_id.b.domain, fcport->d_id.b.area,
fcport->d_id.b.al_pa);
fcport->flags &= ~FCF_ASYNC_SENT;
if (sp->type == SRB_LOGIN_CMD) {
struct srb_iocb *lio = &sp->u.iocb_cmd;
qla2x00_post_async_logout_work(fcport->vha, fcport, NULL);
/* Retry as needed. */
lio->u.logio.data[0] = MBS_COMMAND_ERROR;
lio->u.logio.data[1] = lio->u.logio.flags & SRB_LOGIN_RETRIED ?
QLA_LOGIO_LOGIN_RETRIED : 0;
qla2x00_post_async_login_done_work(fcport->vha, fcport,
lio->u.logio.data);
} else if (sp->type == SRB_LOGOUT_CMD) {
qlt_logo_completion_handler(fcport, QLA_FUNCTION_TIMEOUT);
}
}
static void
qla2x00_async_login_sp_done(void *data, void *ptr, int res)
{
srb_t *sp = (srb_t *)ptr;
struct srb_iocb *lio = &sp->u.iocb_cmd;
struct scsi_qla_host *vha = (scsi_qla_host_t *)data;
if (!test_bit(UNLOADING, &vha->dpc_flags))
qla2x00_post_async_login_done_work(sp->fcport->vha, sp->fcport,
lio->u.logio.data);
sp->free(sp->fcport->vha, sp);
}
int
qla2x00_async_login(struct scsi_qla_host *vha, fc_port_t *fcport,
uint16_t *data)
{
srb_t *sp;
struct srb_iocb *lio;
int rval;
rval = QLA_FUNCTION_FAILED;
sp = qla2x00_get_sp(vha, fcport, GFP_KERNEL);
if (!sp)
goto done;
sp->type = SRB_LOGIN_CMD;
sp->name = "login";
qla2x00_init_timer(sp, qla2x00_get_async_timeout(vha) + 2);
lio = &sp->u.iocb_cmd;
lio->timeout = qla2x00_async_iocb_timeout;
sp->done = qla2x00_async_login_sp_done;
lio->u.logio.flags |= SRB_LOGIN_COND_PLOGI;
if (data[1] & QLA_LOGIO_LOGIN_RETRIED)
lio->u.logio.flags |= SRB_LOGIN_RETRIED;
rval = qla2x00_start_sp(sp);
if (rval != QLA_SUCCESS) {
fcport->flags &= ~FCF_ASYNC_SENT;
fcport->flags |= FCF_LOGIN_NEEDED;
set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
goto done_free_sp;
}
ql_dbg(ql_dbg_disc, vha, 0x2072,
"Async-login - hdl=%x, loopid=%x portid=%02x%02x%02x "
"retries=%d.\n", sp->handle, fcport->loop_id,
fcport->d_id.b.domain, fcport->d_id.b.area, fcport->d_id.b.al_pa,
fcport->login_retry);
return rval;
done_free_sp:
sp->free(fcport->vha, sp);
done:
return rval;
}
static void
qla2x00_async_logout_sp_done(void *data, void *ptr, int res)
{
srb_t *sp = (srb_t *)ptr;
struct srb_iocb *lio = &sp->u.iocb_cmd;
struct scsi_qla_host *vha = (scsi_qla_host_t *)data;
if (!test_bit(UNLOADING, &vha->dpc_flags))
qla2x00_post_async_logout_done_work(sp->fcport->vha, sp->fcport,
lio->u.logio.data);
sp->free(sp->fcport->vha, sp);
}
int
qla2x00_async_logout(struct scsi_qla_host *vha, fc_port_t *fcport)
{
srb_t *sp;
struct srb_iocb *lio;
int rval;
rval = QLA_FUNCTION_FAILED;
sp = qla2x00_get_sp(vha, fcport, GFP_KERNEL);
if (!sp)
goto done;
sp->type = SRB_LOGOUT_CMD;
sp->name = "logout";
qla2x00_init_timer(sp, qla2x00_get_async_timeout(vha) + 2);
lio = &sp->u.iocb_cmd;
lio->timeout = qla2x00_async_iocb_timeout;
sp->done = qla2x00_async_logout_sp_done;
rval = qla2x00_start_sp(sp);
if (rval != QLA_SUCCESS)
goto done_free_sp;
ql_dbg(ql_dbg_disc, vha, 0x2070,
"Async-logout - hdl=%x loop-id=%x portid=%02x%02x%02x.\n",
sp->handle, fcport->loop_id, fcport->d_id.b.domain,
fcport->d_id.b.area, fcport->d_id.b.al_pa);
return rval;
done_free_sp:
sp->free(fcport->vha, sp);
done:
return rval;
}
static void
qla2x00_async_adisc_sp_done(void *data, void *ptr, int res)
{
srb_t *sp = (srb_t *)ptr;
struct srb_iocb *lio = &sp->u.iocb_cmd;
struct scsi_qla_host *vha = (scsi_qla_host_t *)data;
if (!test_bit(UNLOADING, &vha->dpc_flags))
qla2x00_post_async_adisc_done_work(sp->fcport->vha, sp->fcport,
lio->u.logio.data);
sp->free(sp->fcport->vha, sp);
}
int
qla2x00_async_adisc(struct scsi_qla_host *vha, fc_port_t *fcport,
uint16_t *data)
{
srb_t *sp;
struct srb_iocb *lio;
int rval;
rval = QLA_FUNCTION_FAILED;
sp = qla2x00_get_sp(vha, fcport, GFP_KERNEL);
if (!sp)
goto done;
sp->type = SRB_ADISC_CMD;
sp->name = "adisc";
qla2x00_init_timer(sp, qla2x00_get_async_timeout(vha) + 2);
lio = &sp->u.iocb_cmd;
lio->timeout = qla2x00_async_iocb_timeout;
sp->done = qla2x00_async_adisc_sp_done;
if (data[1] & QLA_LOGIO_LOGIN_RETRIED)
lio->u.logio.flags |= SRB_LOGIN_RETRIED;
rval = qla2x00_start_sp(sp);
if (rval != QLA_SUCCESS)
goto done_free_sp;
ql_dbg(ql_dbg_disc, vha, 0x206f,
"Async-adisc - hdl=%x loopid=%x portid=%02x%02x%02x.\n",
sp->handle, fcport->loop_id, fcport->d_id.b.domain,
fcport->d_id.b.area, fcport->d_id.b.al_pa);
return rval;
done_free_sp:
sp->free(fcport->vha, sp);
done:
return rval;
}
static void
qla2x00_tmf_iocb_timeout(void *data)
{
srb_t *sp = (srb_t *)data;
struct srb_iocb *tmf = &sp->u.iocb_cmd;
tmf->u.tmf.comp_status = CS_TIMEOUT;
complete(&tmf->u.tmf.comp);
}
static void
qla2x00_tmf_sp_done(void *data, void *ptr, int res)
{
srb_t *sp = (srb_t *)ptr;
struct srb_iocb *tmf = &sp->u.iocb_cmd;
complete(&tmf->u.tmf.comp);
}
int
qla2x00_async_tm_cmd(fc_port_t *fcport, uint32_t flags, uint32_t lun,
uint32_t tag)
{
struct scsi_qla_host *vha = fcport->vha;
struct srb_iocb *tm_iocb;
srb_t *sp;
int rval = QLA_FUNCTION_FAILED;
sp = qla2x00_get_sp(vha, fcport, GFP_KERNEL);
if (!sp)
goto done;
tm_iocb = &sp->u.iocb_cmd;
sp->type = SRB_TM_CMD;
sp->name = "tmf";
qla2x00_init_timer(sp, qla2x00_get_async_timeout(vha));
tm_iocb->u.tmf.flags = flags;
tm_iocb->u.tmf.lun = lun;
tm_iocb->u.tmf.data = tag;
sp->done = qla2x00_tmf_sp_done;
tm_iocb->timeout = qla2x00_tmf_iocb_timeout;
init_completion(&tm_iocb->u.tmf.comp);
rval = qla2x00_start_sp(sp);
if (rval != QLA_SUCCESS)
goto done_free_sp;
ql_dbg(ql_dbg_taskm, vha, 0x802f,
"Async-tmf hdl=%x loop-id=%x portid=%02x%02x%02x.\n",
sp->handle, fcport->loop_id, fcport->d_id.b.domain,
fcport->d_id.b.area, fcport->d_id.b.al_pa);
wait_for_completion(&tm_iocb->u.tmf.comp);
rval = tm_iocb->u.tmf.comp_status == CS_COMPLETE ?
QLA_SUCCESS : QLA_FUNCTION_FAILED;
if ((rval != QLA_SUCCESS) || tm_iocb->u.tmf.data) {
ql_dbg(ql_dbg_taskm, vha, 0x8030,
"TM IOCB failed (%x).\n", rval);
}
if (!test_bit(UNLOADING, &vha->dpc_flags) && !IS_QLAFX00(vha->hw)) {
flags = tm_iocb->u.tmf.flags;
lun = (uint16_t)tm_iocb->u.tmf.lun;
/* Issue Marker IOCB */
qla2x00_marker(vha, vha->hw->req_q_map[0],
vha->hw->rsp_q_map[0], sp->fcport->loop_id, lun,
flags == TCF_LUN_RESET ? MK_SYNC_ID_LUN : MK_SYNC_ID);
}
done_free_sp:
sp->free(vha, sp);
done:
return rval;
}
static void
qla24xx_abort_iocb_timeout(void *data)
{
srb_t *sp = (srb_t *)data;
struct srb_iocb *abt = &sp->u.iocb_cmd;
abt->u.abt.comp_status = CS_TIMEOUT;
complete(&abt->u.abt.comp);
}
static void
qla24xx_abort_sp_done(void *data, void *ptr, int res)
{
srb_t *sp = (srb_t *)ptr;
struct srb_iocb *abt = &sp->u.iocb_cmd;
complete(&abt->u.abt.comp);
}
static int
qla24xx_async_abort_cmd(srb_t *cmd_sp)
{
scsi_qla_host_t *vha = cmd_sp->fcport->vha;
fc_port_t *fcport = cmd_sp->fcport;
struct srb_iocb *abt_iocb;
srb_t *sp;
int rval = QLA_FUNCTION_FAILED;
sp = qla2x00_get_sp(vha, fcport, GFP_KERNEL);
if (!sp)
goto done;
abt_iocb = &sp->u.iocb_cmd;
sp->type = SRB_ABT_CMD;
sp->name = "abort";
qla2x00_init_timer(sp, qla2x00_get_async_timeout(vha));
abt_iocb->u.abt.cmd_hndl = cmd_sp->handle;
sp->done = qla24xx_abort_sp_done;
abt_iocb->timeout = qla24xx_abort_iocb_timeout;
init_completion(&abt_iocb->u.abt.comp);
rval = qla2x00_start_sp(sp);
if (rval != QLA_SUCCESS)
goto done_free_sp;
ql_dbg(ql_dbg_async, vha, 0x507c,
"Abort command issued - hdl=%x, target_id=%x\n",
cmd_sp->handle, fcport->tgt_id);
wait_for_completion(&abt_iocb->u.abt.comp);
rval = abt_iocb->u.abt.comp_status == CS_COMPLETE ?
QLA_SUCCESS : QLA_FUNCTION_FAILED;
done_free_sp:
sp->free(vha, sp);
done:
return rval;
}
int
qla24xx_async_abort_command(srb_t *sp)
{
unsigned long flags = 0;
uint32_t handle;
fc_port_t *fcport = sp->fcport;
struct scsi_qla_host *vha = fcport->vha;
struct qla_hw_data *ha = vha->hw;
struct req_que *req = vha->req;
spin_lock_irqsave(&ha->hardware_lock, flags);
for (handle = 1; handle < req->num_outstanding_cmds; handle++) {
if (req->outstanding_cmds[handle] == sp)
break;
}
spin_unlock_irqrestore(&ha->hardware_lock, flags);
if (handle == req->num_outstanding_cmds) {
/* Command not found. */
return QLA_FUNCTION_FAILED;
}
if (sp->type == SRB_FXIOCB_DCMD)
return qlafx00_fx_disc(vha, &vha->hw->mr.fcport,
FXDISC_ABORT_IOCTL);
return qla24xx_async_abort_cmd(sp);
}
void
qla2x00_async_login_done(struct scsi_qla_host *vha, fc_port_t *fcport,
uint16_t *data)
{
int rval;
switch (data[0]) {
case MBS_COMMAND_COMPLETE:
/*
* Driver must validate login state - If PRLI not complete,
* force a relogin attempt via implicit LOGO, PLOGI, and PRLI
* requests.
*/
rval = qla2x00_get_port_database(vha, fcport, 0);
if (rval == QLA_NOT_LOGGED_IN) {
fcport->flags &= ~FCF_ASYNC_SENT;
fcport->flags |= FCF_LOGIN_NEEDED;
set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
break;
}
if (rval != QLA_SUCCESS) {
qla2x00_post_async_logout_work(vha, fcport, NULL);
qla2x00_post_async_login_work(vha, fcport, NULL);
break;
}
if (fcport->flags & FCF_FCP2_DEVICE) {
qla2x00_post_async_adisc_work(vha, fcport, data);
break;
}
qla2x00_update_fcport(vha, fcport);
break;
case MBS_COMMAND_ERROR:
fcport->flags &= ~FCF_ASYNC_SENT;
if (data[1] & QLA_LOGIO_LOGIN_RETRIED)
set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
else
qla2x00_mark_device_lost(vha, fcport, 1, 0);
break;
case MBS_PORT_ID_USED:
fcport->loop_id = data[1];
qla2x00_post_async_logout_work(vha, fcport, NULL);
qla2x00_post_async_login_work(vha, fcport, NULL);
break;
case MBS_LOOP_ID_USED:
fcport->loop_id++;
rval = qla2x00_find_new_loop_id(vha, fcport);
if (rval != QLA_SUCCESS) {
fcport->flags &= ~FCF_ASYNC_SENT;
qla2x00_mark_device_lost(vha, fcport, 1, 0);
break;
}
qla2x00_post_async_login_work(vha, fcport, NULL);
break;
}
return;
}
void
qla2x00_async_logout_done(struct scsi_qla_host *vha, fc_port_t *fcport,
uint16_t *data)
{
/* Don't re-login in target mode */
if (!fcport->tgt_session)
qla2x00_mark_device_lost(vha, fcport, 1, 0);
qlt_logo_completion_handler(fcport, data[0]);
return;
}
void
qla2x00_async_adisc_done(struct scsi_qla_host *vha, fc_port_t *fcport,
uint16_t *data)
{
if (data[0] == MBS_COMMAND_COMPLETE) {
qla2x00_update_fcport(vha, fcport);
return;
}
/* Retry login. */
fcport->flags &= ~FCF_ASYNC_SENT;
if (data[1] & QLA_LOGIO_LOGIN_RETRIED)
set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
else
qla2x00_mark_device_lost(vha, fcport, 1, 0);
return;
}
/****************************************************************************/
/* QLogic ISP2x00 Hardware Support Functions. */
/****************************************************************************/
static int
qla83xx_nic_core_fw_load(scsi_qla_host_t *vha)
{
int rval = QLA_SUCCESS;
struct qla_hw_data *ha = vha->hw;
uint32_t idc_major_ver, idc_minor_ver;
uint16_t config[4];
qla83xx_idc_lock(vha, 0);
/* SV: TODO: Assign initialization timeout from
* flash-info / other param
*/
ha->fcoe_dev_init_timeout = QLA83XX_IDC_INITIALIZATION_TIMEOUT;
ha->fcoe_reset_timeout = QLA83XX_IDC_RESET_ACK_TIMEOUT;
/* Set our fcoe function presence */
if (__qla83xx_set_drv_presence(vha) != QLA_SUCCESS) {
ql_dbg(ql_dbg_p3p, vha, 0xb077,
"Error while setting DRV-Presence.\n");
rval = QLA_FUNCTION_FAILED;
goto exit;
}
/* Decide the reset ownership */
qla83xx_reset_ownership(vha);
/*
* On first protocol driver load:
* Init-Owner: Set IDC-Major-Version and Clear IDC-Lock-Recovery
* register.
* Others: Check compatibility with current IDC Major version.
*/
qla83xx_rd_reg(vha, QLA83XX_IDC_MAJOR_VERSION, &idc_major_ver);
if (ha->flags.nic_core_reset_owner) {
/* Set IDC Major version */
idc_major_ver = QLA83XX_SUPP_IDC_MAJOR_VERSION;
qla83xx_wr_reg(vha, QLA83XX_IDC_MAJOR_VERSION, idc_major_ver);
/* Clearing IDC-Lock-Recovery register */
qla83xx_wr_reg(vha, QLA83XX_IDC_LOCK_RECOVERY, 0);
} else if (idc_major_ver != QLA83XX_SUPP_IDC_MAJOR_VERSION) {
/*
* Clear further IDC participation if we are not compatible with
* the current IDC Major Version.
*/
ql_log(ql_log_warn, vha, 0xb07d,
"Failing load, idc_major_ver=%d, expected_major_ver=%d.\n",
idc_major_ver, QLA83XX_SUPP_IDC_MAJOR_VERSION);
__qla83xx_clear_drv_presence(vha);
rval = QLA_FUNCTION_FAILED;
goto exit;
}
/* Each function sets its supported Minor version. */
qla83xx_rd_reg(vha, QLA83XX_IDC_MINOR_VERSION, &idc_minor_ver);
idc_minor_ver |= (QLA83XX_SUPP_IDC_MINOR_VERSION << (ha->portnum * 2));
qla83xx_wr_reg(vha, QLA83XX_IDC_MINOR_VERSION, idc_minor_ver);
if (ha->flags.nic_core_reset_owner) {
memset(config, 0, sizeof(config));
if (!qla81xx_get_port_config(vha, config))
qla83xx_wr_reg(vha, QLA83XX_IDC_DEV_STATE,
QLA8XXX_DEV_READY);
}
rval = qla83xx_idc_state_handler(vha);
exit:
qla83xx_idc_unlock(vha, 0);
return rval;
}
/*
* qla2x00_initialize_adapter
* Initialize board.
*
* Input:
* ha = adapter block pointer.
*
* Returns:
* 0 = success
*/
int
qla2x00_initialize_adapter(scsi_qla_host_t *vha)
{
int rval;
struct qla_hw_data *ha = vha->hw;
struct req_que *req = ha->req_q_map[0];
/* Clear adapter flags. */
vha->flags.online = 0;
ha->flags.chip_reset_done = 0;
vha->flags.reset_active = 0;
ha->flags.pci_channel_io_perm_failure = 0;
ha->flags.eeh_busy = 0;
vha->qla_stats.jiffies_at_last_reset = get_jiffies_64();
atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME);
atomic_set(&vha->loop_state, LOOP_DOWN);
vha->device_flags = DFLG_NO_CABLE;
vha->dpc_flags = 0;
vha->flags.management_server_logged_in = 0;
vha->marker_needed = 0;
ha->isp_abort_cnt = 0;
ha->beacon_blink_led = 0;
set_bit(0, ha->req_qid_map);
set_bit(0, ha->rsp_qid_map);
ql_dbg(ql_dbg_init, vha, 0x0040,
"Configuring PCI space...\n");
rval = ha->isp_ops->pci_config(vha);
if (rval) {
ql_log(ql_log_warn, vha, 0x0044,
"Unable to configure PCI space.\n");
return (rval);
}
ha->isp_ops->reset_chip(vha);
rval = qla2xxx_get_flash_info(vha);
if (rval) {
ql_log(ql_log_fatal, vha, 0x004f,
"Unable to validate FLASH data.\n");
return rval;
}
if (IS_QLA8044(ha)) {
qla8044_read_reset_template(vha);
/* NOTE: If ql2xdontresethba==1, set IDC_CTRL DONTRESET_BIT0.
* If DONRESET_BIT0 is set, drivers should not set dev_state
* to NEED_RESET. But if NEED_RESET is set, drivers should
* should honor the reset. */
if (ql2xdontresethba == 1)
qla8044_set_idc_dontreset(vha);
}
ha->isp_ops->get_flash_version(vha, req->ring);
ql_dbg(ql_dbg_init, vha, 0x0061,
"Configure NVRAM parameters...\n");
ha->isp_ops->nvram_config(vha);
if (ha->flags.disable_serdes) {
/* Mask HBA via NVRAM settings? */
ql_log(ql_log_info, vha, 0x0077,
"Masking HBA WWPN %8phN (via NVRAM).\n", vha->port_name);
return QLA_FUNCTION_FAILED;
}
ql_dbg(ql_dbg_init, vha, 0x0078,
"Verifying loaded RISC code...\n");
if (qla2x00_isp_firmware(vha) != QLA_SUCCESS) {
rval = ha->isp_ops->chip_diag(vha);
if (rval)
return (rval);
rval = qla2x00_setup_chip(vha);
if (rval)
return (rval);
}
if (IS_QLA84XX(ha)) {
ha->cs84xx = qla84xx_get_chip(vha);
if (!ha->cs84xx) {
ql_log(ql_log_warn, vha, 0x00d0,
"Unable to configure ISP84XX.\n");
return QLA_FUNCTION_FAILED;
}
}
if (qla_ini_mode_enabled(vha))
rval = qla2x00_init_rings(vha);
ha->flags.chip_reset_done = 1;
if (rval == QLA_SUCCESS && IS_QLA84XX(ha)) {
/* Issue verify 84xx FW IOCB to complete 84xx initialization */
rval = qla84xx_init_chip(vha);
if (rval != QLA_SUCCESS) {
ql_log(ql_log_warn, vha, 0x00d4,
"Unable to initialize ISP84XX.\n");
qla84xx_put_chip(vha);
}
}
/* Load the NIC Core f/w if we are the first protocol driver. */
if (IS_QLA8031(ha)) {
rval = qla83xx_nic_core_fw_load(vha);
if (rval)
ql_log(ql_log_warn, vha, 0x0124,
"Error in initializing NIC Core f/w.\n");
}
if (IS_QLA24XX_TYPE(ha) || IS_QLA25XX(ha))
qla24xx_read_fcp_prio_cfg(vha);
if (IS_P3P_TYPE(ha))
qla82xx_set_driver_version(vha, QLA2XXX_VERSION);
else
qla25xx_set_driver_version(vha, QLA2XXX_VERSION);
return (rval);
}
/**
* qla2100_pci_config() - Setup ISP21xx PCI configuration registers.
* @ha: HA context
*
* Returns 0 on success.
*/
int
qla2100_pci_config(scsi_qla_host_t *vha)
{
uint16_t w;
unsigned long flags;
struct qla_hw_data *ha = vha->hw;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
pci_set_master(ha->pdev);
pci_try_set_mwi(ha->pdev);
pci_read_config_word(ha->pdev, PCI_COMMAND, &w);
w |= (PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
pci_write_config_word(ha->pdev, PCI_COMMAND, w);
pci_disable_rom(ha->pdev);
/* Get PCI bus information. */
spin_lock_irqsave(&ha->hardware_lock, flags);
ha->pci_attr = RD_REG_WORD(&reg->ctrl_status);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
return QLA_SUCCESS;
}
/**
* qla2300_pci_config() - Setup ISP23xx PCI configuration registers.
* @ha: HA context
*
* Returns 0 on success.
*/
int
qla2300_pci_config(scsi_qla_host_t *vha)
{
uint16_t w;
unsigned long flags = 0;
uint32_t cnt;
struct qla_hw_data *ha = vha->hw;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
pci_set_master(ha->pdev);
pci_try_set_mwi(ha->pdev);
pci_read_config_word(ha->pdev, PCI_COMMAND, &w);
w |= (PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
if (IS_QLA2322(ha) || IS_QLA6322(ha))
w &= ~PCI_COMMAND_INTX_DISABLE;
pci_write_config_word(ha->pdev, PCI_COMMAND, w);
/*
* If this is a 2300 card and not 2312, reset the
* COMMAND_INVALIDATE due to a bug in the 2300. Unfortunately,
* the 2310 also reports itself as a 2300 so we need to get the
* fb revision level -- a 6 indicates it really is a 2300 and
* not a 2310.
*/
if (IS_QLA2300(ha)) {
spin_lock_irqsave(&ha->hardware_lock, flags);
/* Pause RISC. */
WRT_REG_WORD(&reg->hccr, HCCR_PAUSE_RISC);
for (cnt = 0; cnt < 30000; cnt++) {
if ((RD_REG_WORD(&reg->hccr) & HCCR_RISC_PAUSE) != 0)
break;
udelay(10);
}
/* Select FPM registers. */
WRT_REG_WORD(&reg->ctrl_status, 0x20);
RD_REG_WORD(&reg->ctrl_status);
/* Get the fb rev level */
ha->fb_rev = RD_FB_CMD_REG(ha, reg);
if (ha->fb_rev == FPM_2300)
pci_clear_mwi(ha->pdev);
/* Deselect FPM registers. */
WRT_REG_WORD(&reg->ctrl_status, 0x0);
RD_REG_WORD(&reg->ctrl_status);
/* Release RISC module. */
WRT_REG_WORD(&reg->hccr, HCCR_RELEASE_RISC);
for (cnt = 0; cnt < 30000; cnt++) {
if ((RD_REG_WORD(&reg->hccr) & HCCR_RISC_PAUSE) == 0)
break;
udelay(10);
}
spin_unlock_irqrestore(&ha->hardware_lock, flags);
}
pci_write_config_byte(ha->pdev, PCI_LATENCY_TIMER, 0x80);
pci_disable_rom(ha->pdev);
/* Get PCI bus information. */
spin_lock_irqsave(&ha->hardware_lock, flags);
ha->pci_attr = RD_REG_WORD(&reg->ctrl_status);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
return QLA_SUCCESS;
}
/**
* qla24xx_pci_config() - Setup ISP24xx PCI configuration registers.
* @ha: HA context
*
* Returns 0 on success.
*/
int
qla24xx_pci_config(scsi_qla_host_t *vha)
{
uint16_t w;
unsigned long flags = 0;
struct qla_hw_data *ha = vha->hw;
struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
pci_set_master(ha->pdev);
pci_try_set_mwi(ha->pdev);
pci_read_config_word(ha->pdev, PCI_COMMAND, &w);
w |= (PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
w &= ~PCI_COMMAND_INTX_DISABLE;
pci_write_config_word(ha->pdev, PCI_COMMAND, w);
pci_write_config_byte(ha->pdev, PCI_LATENCY_TIMER, 0x80);
/* PCI-X -- adjust Maximum Memory Read Byte Count (2048). */
if (pci_find_capability(ha->pdev, PCI_CAP_ID_PCIX))
pcix_set_mmrbc(ha->pdev, 2048);
/* PCIe -- adjust Maximum Read Request Size (2048). */
if (pci_is_pcie(ha->pdev))
pcie_set_readrq(ha->pdev, 4096);
pci_disable_rom(ha->pdev);
ha->chip_revision = ha->pdev->revision;
/* Get PCI bus information. */
spin_lock_irqsave(&ha->hardware_lock, flags);
ha->pci_attr = RD_REG_DWORD(&reg->ctrl_status);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
return QLA_SUCCESS;
}
/**
* qla25xx_pci_config() - Setup ISP25xx PCI configuration registers.
* @ha: HA context
*
* Returns 0 on success.
*/
int
qla25xx_pci_config(scsi_qla_host_t *vha)
{
uint16_t w;
struct qla_hw_data *ha = vha->hw;
pci_set_master(ha->pdev);
pci_try_set_mwi(ha->pdev);
pci_read_config_word(ha->pdev, PCI_COMMAND, &w);
w |= (PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
w &= ~PCI_COMMAND_INTX_DISABLE;
pci_write_config_word(ha->pdev, PCI_COMMAND, w);
/* PCIe -- adjust Maximum Read Request Size (2048). */
if (pci_is_pcie(ha->pdev))
pcie_set_readrq(ha->pdev, 4096);
pci_disable_rom(ha->pdev);
ha->chip_revision = ha->pdev->revision;
return QLA_SUCCESS;
}
/**
* qla2x00_isp_firmware() - Choose firmware image.
* @ha: HA context
*
* Returns 0 on success.
*/
static int
qla2x00_isp_firmware(scsi_qla_host_t *vha)
{
int rval;
uint16_t loop_id, topo, sw_cap;
uint8_t domain, area, al_pa;
struct qla_hw_data *ha = vha->hw;
/* Assume loading risc code */
rval = QLA_FUNCTION_FAILED;
if (ha->flags.disable_risc_code_load) {
ql_log(ql_log_info, vha, 0x0079, "RISC CODE NOT loaded.\n");
/* Verify checksum of loaded RISC code. */
rval = qla2x00_verify_checksum(vha, ha->fw_srisc_address);
if (rval == QLA_SUCCESS) {
/* And, verify we are not in ROM code. */
rval = qla2x00_get_adapter_id(vha, &loop_id, &al_pa,
&area, &domain, &topo, &sw_cap);
}
}
if (rval)
ql_dbg(ql_dbg_init, vha, 0x007a,
"**** Load RISC code ****.\n");
return (rval);
}
/**
* qla2x00_reset_chip() - Reset ISP chip.
* @ha: HA context
*
* Returns 0 on success.
*/
void
qla2x00_reset_chip(scsi_qla_host_t *vha)
{
unsigned long flags = 0;
struct qla_hw_data *ha = vha->hw;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
uint32_t cnt;
uint16_t cmd;
if (unlikely(pci_channel_offline(ha->pdev)))
return;
ha->isp_ops->disable_intrs(ha);
spin_lock_irqsave(&ha->hardware_lock, flags);
/* Turn off master enable */
cmd = 0;
pci_read_config_word(ha->pdev, PCI_COMMAND, &cmd);
cmd &= ~PCI_COMMAND_MASTER;
pci_write_config_word(ha->pdev, PCI_COMMAND, cmd);
if (!IS_QLA2100(ha)) {
/* Pause RISC. */
WRT_REG_WORD(&reg->hccr, HCCR_PAUSE_RISC);
if (IS_QLA2200(ha) || IS_QLA2300(ha)) {
for (cnt = 0; cnt < 30000; cnt++) {
if ((RD_REG_WORD(&reg->hccr) &
HCCR_RISC_PAUSE) != 0)
break;
udelay(100);
}
} else {
RD_REG_WORD(&reg->hccr); /* PCI Posting. */
udelay(10);
}
/* Select FPM registers. */
WRT_REG_WORD(&reg->ctrl_status, 0x20);
RD_REG_WORD(&reg->ctrl_status); /* PCI Posting. */
/* FPM Soft Reset. */
WRT_REG_WORD(&reg->fpm_diag_config, 0x100);
RD_REG_WORD(&reg->fpm_diag_config); /* PCI Posting. */
/* Toggle Fpm Reset. */
if (!IS_QLA2200(ha)) {
WRT_REG_WORD(&reg->fpm_diag_config, 0x0);
RD_REG_WORD(&reg->fpm_diag_config); /* PCI Posting. */
}
/* Select frame buffer registers. */
WRT_REG_WORD(&reg->ctrl_status, 0x10);
RD_REG_WORD(&reg->ctrl_status); /* PCI Posting. */
/* Reset frame buffer FIFOs. */
if (IS_QLA2200(ha)) {
WRT_FB_CMD_REG(ha, reg, 0xa000);
RD_FB_CMD_REG(ha, reg); /* PCI Posting. */
} else {
WRT_FB_CMD_REG(ha, reg, 0x00fc);
/* Read back fb_cmd until zero or 3 seconds max */
for (cnt = 0; cnt < 3000; cnt++) {
if ((RD_FB_CMD_REG(ha, reg) & 0xff) == 0)
break;
udelay(100);
}
}
/* Select RISC module registers. */
WRT_REG_WORD(&reg->ctrl_status, 0);
RD_REG_WORD(&reg->ctrl_status); /* PCI Posting. */
/* Reset RISC processor. */
WRT_REG_WORD(&reg->hccr, HCCR_RESET_RISC);
RD_REG_WORD(&reg->hccr); /* PCI Posting. */
/* Release RISC processor. */
WRT_REG_WORD(&reg->hccr, HCCR_RELEASE_RISC);
RD_REG_WORD(&reg->hccr); /* PCI Posting. */
}
WRT_REG_WORD(&reg->hccr, HCCR_CLR_RISC_INT);
WRT_REG_WORD(&reg->hccr, HCCR_CLR_HOST_INT);
/* Reset ISP chip. */
WRT_REG_WORD(&reg->ctrl_status, CSR_ISP_SOFT_RESET);
/* Wait for RISC to recover from reset. */
if (IS_QLA2100(ha) || IS_QLA2200(ha) || IS_QLA2300(ha)) {
/*
* It is necessary to for a delay here since the card doesn't
* respond to PCI reads during a reset. On some architectures
* this will result in an MCA.
*/
udelay(20);
for (cnt = 30000; cnt; cnt--) {
if ((RD_REG_WORD(&reg->ctrl_status) &
CSR_ISP_SOFT_RESET) == 0)
break;
udelay(100);
}
} else
udelay(10);
/* Reset RISC processor. */
WRT_REG_WORD(&reg->hccr, HCCR_RESET_RISC);
WRT_REG_WORD(&reg->semaphore, 0);
/* Release RISC processor. */
WRT_REG_WORD(&reg->hccr, HCCR_RELEASE_RISC);
RD_REG_WORD(&reg->hccr); /* PCI Posting. */
if (IS_QLA2100(ha) || IS_QLA2200(ha) || IS_QLA2300(ha)) {
for (cnt = 0; cnt < 30000; cnt++) {
if (RD_MAILBOX_REG(ha, reg, 0) != MBS_BUSY)
break;
udelay(100);
}
} else
udelay(100);
/* Turn on master enable */
cmd |= PCI_COMMAND_MASTER;
pci_write_config_word(ha->pdev, PCI_COMMAND, cmd);
/* Disable RISC pause on FPM parity error. */
if (!IS_QLA2100(ha)) {
WRT_REG_WORD(&reg->hccr, HCCR_DISABLE_PARITY_PAUSE);
RD_REG_WORD(&reg->hccr); /* PCI Posting. */
}
spin_unlock_irqrestore(&ha->hardware_lock, flags);
}
/**
* qla81xx_reset_mpi() - Reset's MPI FW via Write MPI Register MBC.
*
* Returns 0 on success.
*/
static int
qla81xx_reset_mpi(scsi_qla_host_t *vha)
{
uint16_t mb[4] = {0x1010, 0, 1, 0};
if (!IS_QLA81XX(vha->hw))
return QLA_SUCCESS;
return qla81xx_write_mpi_register(vha, mb);
}
/**
* qla24xx_reset_risc() - Perform full reset of ISP24xx RISC.
* @ha: HA context
*
* Returns 0 on success.
*/
static inline int
qla24xx_reset_risc(scsi_qla_host_t *vha)
{
unsigned long flags = 0;
struct qla_hw_data *ha = vha->hw;
struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
uint32_t cnt;
uint16_t wd;
static int abts_cnt; /* ISP abort retry counts */
int rval = QLA_SUCCESS;
spin_lock_irqsave(&ha->hardware_lock, flags);
/* Reset RISC. */
WRT_REG_DWORD(&reg->ctrl_status, CSRX_DMA_SHUTDOWN|MWB_4096_BYTES);
for (cnt = 0; cnt < 30000; cnt++) {
if ((RD_REG_DWORD(&reg->ctrl_status) & CSRX_DMA_ACTIVE) == 0)
break;
udelay(10);
}
if (!(RD_REG_DWORD(&reg->ctrl_status) & CSRX_DMA_ACTIVE))
set_bit(DMA_SHUTDOWN_CMPL, &ha->fw_dump_cap_flags);
ql_dbg(ql_dbg_init + ql_dbg_verbose, vha, 0x017e,
"HCCR: 0x%x, Control Status %x, DMA active status:0x%x\n",
RD_REG_DWORD(&reg->hccr),
RD_REG_DWORD(&reg->ctrl_status),
(RD_REG_DWORD(&reg->ctrl_status) & CSRX_DMA_ACTIVE));
WRT_REG_DWORD(&reg->ctrl_status,
CSRX_ISP_SOFT_RESET|CSRX_DMA_SHUTDOWN|MWB_4096_BYTES);
pci_read_config_word(ha->pdev, PCI_COMMAND, &wd);
udelay(100);
/* Wait for firmware to complete NVRAM accesses. */
RD_REG_WORD(&reg->mailbox0);
for (cnt = 10000; RD_REG_WORD(&reg->mailbox0) != 0 &&
rval == QLA_SUCCESS; cnt--) {
barrier();
if (cnt)
udelay(5);
else
rval = QLA_FUNCTION_TIMEOUT;
}
if (rval == QLA_SUCCESS)
set_bit(ISP_MBX_RDY, &ha->fw_dump_cap_flags);
ql_dbg(ql_dbg_init + ql_dbg_verbose, vha, 0x017f,
"HCCR: 0x%x, MailBox0 Status 0x%x\n",
RD_REG_DWORD(&reg->hccr),
RD_REG_DWORD(&reg->mailbox0));
/* Wait for soft-reset to complete. */
RD_REG_DWORD(&reg->ctrl_status);
for (cnt = 0; cnt < 6000000; cnt++) {
barrier();
if ((RD_REG_DWORD(&reg->ctrl_status) &
CSRX_ISP_SOFT_RESET) == 0)
break;
udelay(5);
}
if (!(RD_REG_DWORD(&reg->ctrl_status) & CSRX_ISP_SOFT_RESET))
set_bit(ISP_SOFT_RESET_CMPL, &ha->fw_dump_cap_flags);
ql_dbg(ql_dbg_init + ql_dbg_verbose, vha, 0x015d,
"HCCR: 0x%x, Soft Reset status: 0x%x\n",
RD_REG_DWORD(&reg->hccr),
RD_REG_DWORD(&reg->ctrl_status));
/* If required, do an MPI FW reset now */
if (test_and_clear_bit(MPI_RESET_NEEDED, &vha->dpc_flags)) {
if (qla81xx_reset_mpi(vha) != QLA_SUCCESS) {
if (++abts_cnt < 5) {
set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
set_bit(MPI_RESET_NEEDED, &vha->dpc_flags);
} else {
/*
* We exhausted the ISP abort retries. We have to
* set the board offline.
*/
abts_cnt = 0;
vha->flags.online = 0;
}
}
}
WRT_REG_DWORD(&reg->hccr, HCCRX_SET_RISC_RESET);
RD_REG_DWORD(&reg->hccr);
WRT_REG_DWORD(&reg->hccr, HCCRX_REL_RISC_PAUSE);
RD_REG_DWORD(&reg->hccr);
WRT_REG_DWORD(&reg->hccr, HCCRX_CLR_RISC_RESET);
RD_REG_DWORD(&reg->hccr);
RD_REG_WORD(&reg->mailbox0);
for (cnt = 6000000; RD_REG_WORD(&reg->mailbox0) != 0 &&
rval == QLA_SUCCESS; cnt--) {
barrier();
if (cnt)
udelay(5);
else
rval = QLA_FUNCTION_TIMEOUT;
}
if (rval == QLA_SUCCESS)
set_bit(RISC_RDY_AFT_RESET, &ha->fw_dump_cap_flags);
ql_dbg(ql_dbg_init + ql_dbg_verbose, vha, 0x015e,
"Host Risc 0x%x, mailbox0 0x%x\n",
RD_REG_DWORD(&reg->hccr),
RD_REG_WORD(&reg->mailbox0));
spin_unlock_irqrestore(&ha->hardware_lock, flags);
ql_dbg(ql_dbg_init + ql_dbg_verbose, vha, 0x015f,
"Driver in %s mode\n",
IS_NOPOLLING_TYPE(ha) ? "Interrupt" : "Polling");
if (IS_NOPOLLING_TYPE(ha))
ha->isp_ops->enable_intrs(ha);
return rval;
}
static void
qla25xx_read_risc_sema_reg(scsi_qla_host_t *vha, uint32_t *data)
{
struct device_reg_24xx __iomem *reg = &vha->hw->iobase->isp24;
WRT_REG_DWORD(&reg->iobase_addr, RISC_REGISTER_BASE_OFFSET);
*data = RD_REG_DWORD(&reg->iobase_window + RISC_REGISTER_WINDOW_OFFET);
}
static void
qla25xx_write_risc_sema_reg(scsi_qla_host_t *vha, uint32_t data)
{
struct device_reg_24xx __iomem *reg = &vha->hw->iobase->isp24;
WRT_REG_DWORD(&reg->iobase_addr, RISC_REGISTER_BASE_OFFSET);
WRT_REG_DWORD(&reg->iobase_window + RISC_REGISTER_WINDOW_OFFET, data);
}
static void
qla25xx_manipulate_risc_semaphore(scsi_qla_host_t *vha)
{
uint32_t wd32 = 0;
uint delta_msec = 100;
uint elapsed_msec = 0;
uint timeout_msec;
ulong n;
if (vha->hw->pdev->subsystem_device != 0x0175 &&
vha->hw->pdev->subsystem_device != 0x0240)
return;
WRT_REG_DWORD(&vha->hw->iobase->isp24.hccr, HCCRX_SET_RISC_PAUSE);
udelay(100);
attempt:
timeout_msec = TIMEOUT_SEMAPHORE;
n = timeout_msec / delta_msec;
while (n--) {
qla25xx_write_risc_sema_reg(vha, RISC_SEMAPHORE_SET);
qla25xx_read_risc_sema_reg(vha, &wd32);
if (wd32 & RISC_SEMAPHORE)
break;
msleep(delta_msec);
elapsed_msec += delta_msec;
if (elapsed_msec > TIMEOUT_TOTAL_ELAPSED)
goto force;
}
if (!(wd32 & RISC_SEMAPHORE))
goto force;
if (!(wd32 & RISC_SEMAPHORE_FORCE))
goto acquired;
qla25xx_write_risc_sema_reg(vha, RISC_SEMAPHORE_CLR);
timeout_msec = TIMEOUT_SEMAPHORE_FORCE;
n = timeout_msec / delta_msec;
while (n--) {
qla25xx_read_risc_sema_reg(vha, &wd32);
if (!(wd32 & RISC_SEMAPHORE_FORCE))
break;
msleep(delta_msec);
elapsed_msec += delta_msec;
if (elapsed_msec > TIMEOUT_TOTAL_ELAPSED)
goto force;
}
if (wd32 & RISC_SEMAPHORE_FORCE)
qla25xx_write_risc_sema_reg(vha, RISC_SEMAPHORE_FORCE_CLR);
goto attempt;
force:
qla25xx_write_risc_sema_reg(vha, RISC_SEMAPHORE_FORCE_SET);
acquired:
return;
}
/**
* qla24xx_reset_chip() - Reset ISP24xx chip.
* @ha: HA context
*
* Returns 0 on success.
*/
void
qla24xx_reset_chip(scsi_qla_host_t *vha)
{
struct qla_hw_data *ha = vha->hw;
if (pci_channel_offline(ha->pdev) &&
ha->flags.pci_channel_io_perm_failure) {
return;
}
ha->isp_ops->disable_intrs(ha);
qla25xx_manipulate_risc_semaphore(vha);
/* Perform RISC reset. */
qla24xx_reset_risc(vha);
}
/**
* qla2x00_chip_diag() - Test chip for proper operation.
* @ha: HA context
*
* Returns 0 on success.
*/
int
qla2x00_chip_diag(scsi_qla_host_t *vha)
{
int rval;
struct qla_hw_data *ha = vha->hw;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
unsigned long flags = 0;
uint16_t data;
uint32_t cnt;
uint16_t mb[5];
struct req_que *req = ha->req_q_map[0];
/* Assume a failed state */
rval = QLA_FUNCTION_FAILED;
ql_dbg(ql_dbg_init, vha, 0x007b,
"Testing device at %lx.\n", (u_long)&reg->flash_address);
spin_lock_irqsave(&ha->hardware_lock, flags);
/* Reset ISP chip. */
WRT_REG_WORD(&reg->ctrl_status, CSR_ISP_SOFT_RESET);
/*
* We need to have a delay here since the card will not respond while
* in reset causing an MCA on some architectures.
*/
udelay(20);
data = qla2x00_debounce_register(&reg->ctrl_status);
for (cnt = 6000000 ; cnt && (data & CSR_ISP_SOFT_RESET); cnt--) {
udelay(5);
data = RD_REG_WORD(&reg->ctrl_status);
barrier();
}
if (!cnt)
goto chip_diag_failed;
ql_dbg(ql_dbg_init, vha, 0x007c,
"Reset register cleared by chip reset.\n");
/* Reset RISC processor. */
WRT_REG_WORD(&reg->hccr, HCCR_RESET_RISC);
WRT_REG_WORD(&reg->hccr, HCCR_RELEASE_RISC);
/* Workaround for QLA2312 PCI parity error */
if (IS_QLA2100(ha) || IS_QLA2200(ha) || IS_QLA2300(ha)) {
data = qla2x00_debounce_register(MAILBOX_REG(ha, reg, 0));
for (cnt = 6000000; cnt && (data == MBS_BUSY); cnt--) {
udelay(5);
data = RD_MAILBOX_REG(ha, reg, 0);
barrier();
}
} else
udelay(10);
if (!cnt)
goto chip_diag_failed;
/* Check product ID of chip */
ql_dbg(ql_dbg_init, vha, 0x007d, "Checking product Id of chip.\n");
mb[1] = RD_MAILBOX_REG(ha, reg, 1);
mb[2] = RD_MAILBOX_REG(ha, reg, 2);
mb[3] = RD_MAILBOX_REG(ha, reg, 3);
mb[4] = qla2x00_debounce_register(MAILBOX_REG(ha, reg, 4));
if (mb[1] != PROD_ID_1 || (mb[2] != PROD_ID_2 && mb[2] != PROD_ID_2a) ||
mb[3] != PROD_ID_3) {
ql_log(ql_log_warn, vha, 0x0062,
"Wrong product ID = 0x%x,0x%x,0x%x.\n",
mb[1], mb[2], mb[3]);
goto chip_diag_failed;
}
ha->product_id[0] = mb[1];
ha->product_id[1] = mb[2];
ha->product_id[2] = mb[3];
ha->product_id[3] = mb[4];
/* Adjust fw RISC transfer size */
if (req->length > 1024)
ha->fw_transfer_size = REQUEST_ENTRY_SIZE * 1024;
else
ha->fw_transfer_size = REQUEST_ENTRY_SIZE *
req->length;
if (IS_QLA2200(ha) &&
RD_MAILBOX_REG(ha, reg, 7) == QLA2200A_RISC_ROM_VER) {
/* Limit firmware transfer size with a 2200A */
ql_dbg(ql_dbg_init, vha, 0x007e, "Found QLA2200A Chip.\n");
ha->device_type |= DT_ISP2200A;
ha->fw_transfer_size = 128;
}
/* Wrap Incoming Mailboxes Test. */
spin_unlock_irqrestore(&ha->hardware_lock, flags);
ql_dbg(ql_dbg_init, vha, 0x007f, "Checking mailboxes.\n");
rval = qla2x00_mbx_reg_test(vha);
if (rval)
ql_log(ql_log_warn, vha, 0x0080,
"Failed mailbox send register test.\n");
else
/* Flag a successful rval */
rval = QLA_SUCCESS;
spin_lock_irqsave(&ha->hardware_lock, flags);
chip_diag_failed:
if (rval)
ql_log(ql_log_info, vha, 0x0081,
"Chip diagnostics **** FAILED ****.\n");
spin_unlock_irqrestore(&ha->hardware_lock, flags);
return (rval);
}
/**
* qla24xx_chip_diag() - Test ISP24xx for proper operation.
* @ha: HA context
*
* Returns 0 on success.
*/
int
qla24xx_chip_diag(scsi_qla_host_t *vha)
{
int rval;
struct qla_hw_data *ha = vha->hw;
struct req_que *req = ha->req_q_map[0];
if (IS_P3P_TYPE(ha))
return QLA_SUCCESS;
ha->fw_transfer_size = REQUEST_ENTRY_SIZE * req->length;
rval = qla2x00_mbx_reg_test(vha);
if (rval) {
ql_log(ql_log_warn, vha, 0x0082,
"Failed mailbox send register test.\n");
} else {
/* Flag a successful rval */
rval = QLA_SUCCESS;
}
return rval;
}
void
qla2x00_alloc_fw_dump(scsi_qla_host_t *vha)
{
int rval;
uint32_t dump_size, fixed_size, mem_size, req_q_size, rsp_q_size,
eft_size, fce_size, mq_size;
dma_addr_t tc_dma;
void *tc;
struct qla_hw_data *ha = vha->hw;
struct req_que *req = ha->req_q_map[0];
struct rsp_que *rsp = ha->rsp_q_map[0];
if (ha->fw_dump) {
ql_dbg(ql_dbg_init, vha, 0x00bd,
"Firmware dump already allocated.\n");
return;
}
ha->fw_dumped = 0;
ha->fw_dump_cap_flags = 0;
dump_size = fixed_size = mem_size = eft_size = fce_size = mq_size = 0;
req_q_size = rsp_q_size = 0;
if (IS_QLA27XX(ha))
goto try_fce;
if (IS_QLA2100(ha) || IS_QLA2200(ha)) {
fixed_size = sizeof(struct qla2100_fw_dump);
} else if (IS_QLA23XX(ha)) {
fixed_size = offsetof(struct qla2300_fw_dump, data_ram);
mem_size = (ha->fw_memory_size - 0x11000 + 1) *
sizeof(uint16_t);
} else if (IS_FWI2_CAPABLE(ha)) {
if (IS_QLA83XX(ha) || IS_QLA27XX(ha))
fixed_size = offsetof(struct qla83xx_fw_dump, ext_mem);
else if (IS_QLA81XX(ha))
fixed_size = offsetof(struct qla81xx_fw_dump, ext_mem);
else if (IS_QLA25XX(ha))
fixed_size = offsetof(struct qla25xx_fw_dump, ext_mem);
else
fixed_size = offsetof(struct qla24xx_fw_dump, ext_mem);
mem_size = (ha->fw_memory_size - 0x100000 + 1) *
sizeof(uint32_t);
if (ha->mqenable) {
if (!IS_QLA83XX(ha) && !IS_QLA27XX(ha))
mq_size = sizeof(struct qla2xxx_mq_chain);
/*
* Allocate maximum buffer size for all queues.
* Resizing must be done at end-of-dump processing.
*/
mq_size += ha->max_req_queues *
(req->length * sizeof(request_t));
mq_size += ha->max_rsp_queues *
(rsp->length * sizeof(response_t));
}
if (ha->tgt.atio_ring)
mq_size += ha->tgt.atio_q_length * sizeof(request_t);
/* Allocate memory for Fibre Channel Event Buffer. */
if (!IS_QLA25XX(ha) && !IS_QLA81XX(ha) && !IS_QLA83XX(ha) &&
!IS_QLA27XX(ha))
goto try_eft;
try_fce:
if (ha->fce)
dma_free_coherent(&ha->pdev->dev,
FCE_SIZE, ha->fce, ha->fce_dma);
/* Allocate memory for Fibre Channel Event Buffer. */
tc = dma_zalloc_coherent(&ha->pdev->dev, FCE_SIZE, &tc_dma,
GFP_KERNEL);
if (!tc) {
ql_log(ql_log_warn, vha, 0x00be,
"Unable to allocate (%d KB) for FCE.\n",
FCE_SIZE / 1024);
goto try_eft;
}
rval = qla2x00_enable_fce_trace(vha, tc_dma, FCE_NUM_BUFFERS,
ha->fce_mb, &ha->fce_bufs);
if (rval) {
ql_log(ql_log_warn, vha, 0x00bf,
"Unable to initialize FCE (%d).\n", rval);
dma_free_coherent(&ha->pdev->dev, FCE_SIZE, tc,
tc_dma);
ha->flags.fce_enabled = 0;
goto try_eft;
}
ql_dbg(ql_dbg_init, vha, 0x00c0,
"Allocate (%d KB) for FCE...\n", FCE_SIZE / 1024);
fce_size = sizeof(struct qla2xxx_fce_chain) + FCE_SIZE;
ha->flags.fce_enabled = 1;
ha->fce_dma = tc_dma;
ha->fce = tc;
try_eft:
if (ha->eft)
dma_free_coherent(&ha->pdev->dev,
EFT_SIZE, ha->eft, ha->eft_dma);
/* Allocate memory for Extended Trace Buffer. */
tc = dma_zalloc_coherent(&ha->pdev->dev, EFT_SIZE, &tc_dma,
GFP_KERNEL);
if (!tc) {
ql_log(ql_log_warn, vha, 0x00c1,
"Unable to allocate (%d KB) for EFT.\n",
EFT_SIZE / 1024);
goto cont_alloc;
}
rval = qla2x00_enable_eft_trace(vha, tc_dma, EFT_NUM_BUFFERS);
if (rval) {
ql_log(ql_log_warn, vha, 0x00c2,
"Unable to initialize EFT (%d).\n", rval);
dma_free_coherent(&ha->pdev->dev, EFT_SIZE, tc,
tc_dma);
goto cont_alloc;
}
ql_dbg(ql_dbg_init, vha, 0x00c3,
"Allocated (%d KB) EFT ...\n", EFT_SIZE / 1024);
eft_size = EFT_SIZE;
ha->eft_dma = tc_dma;
ha->eft = tc;
}
cont_alloc:
if (IS_QLA27XX(ha)) {
if (!ha->fw_dump_template) {
ql_log(ql_log_warn, vha, 0x00ba,
"Failed missing fwdump template\n");
return;
}
dump_size = qla27xx_fwdt_calculate_dump_size(vha);
ql_dbg(ql_dbg_init, vha, 0x00fa,
"-> allocating fwdump (%x bytes)...\n", dump_size);
goto allocate;
}
req_q_size = req->length * sizeof(request_t);
rsp_q_size = rsp->length * sizeof(response_t);
dump_size = offsetof(struct qla2xxx_fw_dump, isp);
dump_size += fixed_size + mem_size + req_q_size + rsp_q_size + eft_size;
ha->chain_offset = dump_size;
dump_size += mq_size + fce_size;
allocate:
ha->fw_dump = vmalloc(dump_size);
if (!ha->fw_dump) {
ql_log(ql_log_warn, vha, 0x00c4,
"Unable to allocate (%d KB) for firmware dump.\n",
dump_size / 1024);
if (ha->fce) {
dma_free_coherent(&ha->pdev->dev, FCE_SIZE, ha->fce,
ha->fce_dma);
ha->fce = NULL;
ha->fce_dma = 0;
}
if (ha->eft) {
dma_free_coherent(&ha->pdev->dev, eft_size, ha->eft,
ha->eft_dma);
ha->eft = NULL;
ha->eft_dma = 0;
}
return;
}
ha->fw_dump_len = dump_size;
ql_dbg(ql_dbg_init, vha, 0x00c5,
"Allocated (%d KB) for firmware dump.\n", dump_size / 1024);
if (IS_QLA27XX(ha))
return;
ha->fw_dump->signature[0] = 'Q';
ha->fw_dump->signature[1] = 'L';
ha->fw_dump->signature[2] = 'G';
ha->fw_dump->signature[3] = 'C';
ha->fw_dump->version = htonl(1);
ha->fw_dump->fixed_size = htonl(fixed_size);
ha->fw_dump->mem_size = htonl(mem_size);
ha->fw_dump->req_q_size = htonl(req_q_size);
ha->fw_dump->rsp_q_size = htonl(rsp_q_size);
ha->fw_dump->eft_size = htonl(eft_size);
ha->fw_dump->eft_addr_l = htonl(LSD(ha->eft_dma));
ha->fw_dump->eft_addr_h = htonl(MSD(ha->eft_dma));
ha->fw_dump->header_size =
htonl(offsetof(struct qla2xxx_fw_dump, isp));
}
static int
qla81xx_mpi_sync(scsi_qla_host_t *vha)
{
#define MPS_MASK 0xe0
int rval;
uint16_t dc;
uint32_t dw;
if (!IS_QLA81XX(vha->hw))
return QLA_SUCCESS;
rval = qla2x00_write_ram_word(vha, 0x7c00, 1);
if (rval != QLA_SUCCESS) {
ql_log(ql_log_warn, vha, 0x0105,
"Unable to acquire semaphore.\n");
goto done;
}
pci_read_config_word(vha->hw->pdev, 0x54, &dc);
rval = qla2x00_read_ram_word(vha, 0x7a15, &dw);
if (rval != QLA_SUCCESS) {
ql_log(ql_log_warn, vha, 0x0067, "Unable to read sync.\n");
goto done_release;
}
dc &= MPS_MASK;
if (dc == (dw & MPS_MASK))
goto done_release;
dw &= ~MPS_MASK;
dw |= dc;
rval = qla2x00_write_ram_word(vha, 0x7a15, dw);
if (rval != QLA_SUCCESS) {
ql_log(ql_log_warn, vha, 0x0114, "Unable to gain sync.\n");
}
done_release:
rval = qla2x00_write_ram_word(vha, 0x7c00, 0);
if (rval != QLA_SUCCESS) {
ql_log(ql_log_warn, vha, 0x006d,
"Unable to release semaphore.\n");
}
done:
return rval;
}
int
qla2x00_alloc_outstanding_cmds(struct qla_hw_data *ha, struct req_que *req)
{
/* Don't try to reallocate the array */
if (req->outstanding_cmds)
return QLA_SUCCESS;
if (!IS_FWI2_CAPABLE(ha) || (ha->mqiobase &&
(ql2xmultique_tag || ql2xmaxqueues > 1)))
req->num_outstanding_cmds = DEFAULT_OUTSTANDING_COMMANDS;
else {
if (ha->cur_fw_xcb_count <= ha->cur_fw_iocb_count)
req->num_outstanding_cmds = ha->cur_fw_xcb_count;
else
req->num_outstanding_cmds = ha->cur_fw_iocb_count;
}
req->outstanding_cmds = kzalloc(sizeof(srb_t *) *
req->num_outstanding_cmds, GFP_KERNEL);
if (!req->outstanding_cmds) {
/*
* Try to allocate a minimal size just so we can get through
* initialization.
*/
req->num_outstanding_cmds = MIN_OUTSTANDING_COMMANDS;
req->outstanding_cmds = kzalloc(sizeof(srb_t *) *
req->num_outstanding_cmds, GFP_KERNEL);
if (!req->outstanding_cmds) {
ql_log(ql_log_fatal, NULL, 0x0126,
"Failed to allocate memory for "
"outstanding_cmds for req_que %p.\n", req);
req->num_outstanding_cmds = 0;
return QLA_FUNCTION_FAILED;
}
}
return QLA_SUCCESS;
}
/**
* qla2x00_setup_chip() - Load and start RISC firmware.
* @ha: HA context
*
* Returns 0 on success.
*/
static int
qla2x00_setup_chip(scsi_qla_host_t *vha)
{
int rval;
uint32_t srisc_address = 0;
struct qla_hw_data *ha = vha->hw;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
unsigned long flags;
uint16_t fw_major_version;
if (IS_P3P_TYPE(ha)) {
rval = ha->isp_ops->load_risc(vha, &srisc_address);
if (rval == QLA_SUCCESS) {
qla2x00_stop_firmware(vha);
goto enable_82xx_npiv;
} else
goto failed;
}
if (!IS_FWI2_CAPABLE(ha) && !IS_QLA2100(ha) && !IS_QLA2200(ha)) {
/* Disable SRAM, Instruction RAM and GP RAM parity. */
spin_lock_irqsave(&ha->hardware_lock, flags);
WRT_REG_WORD(&reg->hccr, (HCCR_ENABLE_PARITY + 0x0));
RD_REG_WORD(&reg->hccr);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
}
qla81xx_mpi_sync(vha);
/* Load firmware sequences */
rval = ha->isp_ops->load_risc(vha, &srisc_address);
if (rval == QLA_SUCCESS) {
ql_dbg(ql_dbg_init, vha, 0x00c9,
"Verifying Checksum of loaded RISC code.\n");
rval = qla2x00_verify_checksum(vha, srisc_address);
if (rval == QLA_SUCCESS) {
/* Start firmware execution. */
ql_dbg(ql_dbg_init, vha, 0x00ca,
"Starting firmware.\n");
if (ql2xexlogins)
ha->flags.exlogins_enabled = 1;
if (ql2xexchoffld)
ha->flags.exchoffld_enabled = 1;
rval = qla2x00_execute_fw(vha, srisc_address);
/* Retrieve firmware information. */
if (rval == QLA_SUCCESS) {
rval = qla2x00_set_exlogins_buffer(vha);
if (rval != QLA_SUCCESS)
goto failed;
rval = qla2x00_set_exchoffld_buffer(vha);
if (rval != QLA_SUCCESS)
goto failed;
enable_82xx_npiv:
fw_major_version = ha->fw_major_version;
if (IS_P3P_TYPE(ha))
qla82xx_check_md_needed(vha);
else
rval = qla2x00_get_fw_version(vha);
if (rval != QLA_SUCCESS)
goto failed;
ha->flags.npiv_supported = 0;
if (IS_QLA2XXX_MIDTYPE(ha) &&
(ha->fw_attributes & BIT_2)) {
ha->flags.npiv_supported = 1;
if ((!ha->max_npiv_vports) ||
((ha->max_npiv_vports + 1) %
MIN_MULTI_ID_FABRIC))
ha->max_npiv_vports =
MIN_MULTI_ID_FABRIC - 1;
}
qla2x00_get_resource_cnts(vha);
/*
* Allocate the array of outstanding commands
* now that we know the firmware resources.
*/
rval = qla2x00_alloc_outstanding_cmds(ha,
vha->req);
if (rval != QLA_SUCCESS)
goto failed;
if (!fw_major_version && ql2xallocfwdump
&& !(IS_P3P_TYPE(ha)))
qla2x00_alloc_fw_dump(vha);
} else {
goto failed;
}
} else {
ql_log(ql_log_fatal, vha, 0x00cd,
"ISP Firmware failed checksum.\n");
goto failed;
}
} else
goto failed;
if (!IS_FWI2_CAPABLE(ha) && !IS_QLA2100(ha) && !IS_QLA2200(ha)) {
/* Enable proper parity. */
spin_lock_irqsave(&ha->hardware_lock, flags);
if (IS_QLA2300(ha))
/* SRAM parity */
WRT_REG_WORD(&reg->hccr, HCCR_ENABLE_PARITY + 0x1);
else
/* SRAM, Instruction RAM and GP RAM parity */
WRT_REG_WORD(&reg->hccr, HCCR_ENABLE_PARITY + 0x7);
RD_REG_WORD(&reg->hccr);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
}
if (IS_QLA27XX(ha))
ha->flags.fac_supported = 1;
else if (rval == QLA_SUCCESS && IS_FAC_REQUIRED(ha)) {
uint32_t size;
rval = qla81xx_fac_get_sector_size(vha, &size);
if (rval == QLA_SUCCESS) {
ha->flags.fac_supported = 1;
ha->fdt_block_size = size << 2;
} else {
ql_log(ql_log_warn, vha, 0x00ce,
"Unsupported FAC firmware (%d.%02d.%02d).\n",
ha->fw_major_version, ha->fw_minor_version,
ha->fw_subminor_version);
if (IS_QLA83XX(ha) || IS_QLA27XX(ha)) {
ha->flags.fac_supported = 0;
rval = QLA_SUCCESS;
}
}
}
failed:
if (rval) {
ql_log(ql_log_fatal, vha, 0x00cf,
"Setup chip ****FAILED****.\n");
}
return (rval);
}
/**
* qla2x00_init_response_q_entries() - Initializes response queue entries.
* @ha: HA context
*
* Beginning of request ring has initialization control block already built
* by nvram config routine.
*
* Returns 0 on success.
*/
void
qla2x00_init_response_q_entries(struct rsp_que *rsp)
{
uint16_t cnt;
response_t *pkt;
rsp->ring_ptr = rsp->ring;
rsp->ring_index = 0;
rsp->status_srb = NULL;
pkt = rsp->ring_ptr;
for (cnt = 0; cnt < rsp->length; cnt++) {
pkt->signature = RESPONSE_PROCESSED;
pkt++;
}
}
/**
* qla2x00_update_fw_options() - Read and process firmware options.
* @ha: HA context
*
* Returns 0 on success.
*/
void
qla2x00_update_fw_options(scsi_qla_host_t *vha)
{
uint16_t swing, emphasis, tx_sens, rx_sens;
struct qla_hw_data *ha = vha->hw;
memset(ha->fw_options, 0, sizeof(ha->fw_options));
qla2x00_get_fw_options(vha, ha->fw_options);
if (IS_QLA2100(ha) || IS_QLA2200(ha))
return;
/* Serial Link options. */
ql_dbg(ql_dbg_init + ql_dbg_buffer, vha, 0x0115,
"Serial link options.\n");
ql_dump_buffer(ql_dbg_init + ql_dbg_buffer, vha, 0x0109,
(uint8_t *)&ha->fw_seriallink_options,
sizeof(ha->fw_seriallink_options));
ha->fw_options[1] &= ~FO1_SET_EMPHASIS_SWING;
if (ha->fw_seriallink_options[3] & BIT_2) {
ha->fw_options[1] |= FO1_SET_EMPHASIS_SWING;
/* 1G settings */
swing = ha->fw_seriallink_options[2] & (BIT_2 | BIT_1 | BIT_0);
emphasis = (ha->fw_seriallink_options[2] &
(BIT_4 | BIT_3)) >> 3;
tx_sens = ha->fw_seriallink_options[0] &
(BIT_3 | BIT_2 | BIT_1 | BIT_0);
rx_sens = (ha->fw_seriallink_options[0] &
(BIT_7 | BIT_6 | BIT_5 | BIT_4)) >> 4;
ha->fw_options[10] = (emphasis << 14) | (swing << 8);
if (IS_QLA2300(ha) || IS_QLA2312(ha) || IS_QLA6312(ha)) {
if (rx_sens == 0x0)
rx_sens = 0x3;
ha->fw_options[10] |= (tx_sens << 4) | rx_sens;
} else if (IS_QLA2322(ha) || IS_QLA6322(ha))
ha->fw_options[10] |= BIT_5 |
((rx_sens & (BIT_1 | BIT_0)) << 2) |
(tx_sens & (BIT_1 | BIT_0));
/* 2G settings */
swing = (ha->fw_seriallink_options[2] &
(BIT_7 | BIT_6 | BIT_5)) >> 5;
emphasis = ha->fw_seriallink_options[3] & (BIT_1 | BIT_0);
tx_sens = ha->fw_seriallink_options[1] &
(BIT_3 | BIT_2 | BIT_1 | BIT_0);
rx_sens = (ha->fw_seriallink_options[1] &
(BIT_7 | BIT_6 | BIT_5 | BIT_4)) >> 4;
ha->fw_options[11] = (emphasis << 14) | (swing << 8);
if (IS_QLA2300(ha) || IS_QLA2312(ha) || IS_QLA6312(ha)) {
if (rx_sens == 0x0)
rx_sens = 0x3;
ha->fw_options[11] |= (tx_sens << 4) | rx_sens;
} else if (IS_QLA2322(ha) || IS_QLA6322(ha))
ha->fw_options[11] |= BIT_5 |
((rx_sens & (BIT_1 | BIT_0)) << 2) |
(tx_sens & (BIT_1 | BIT_0));
}
/* FCP2 options. */
/* Return command IOCBs without waiting for an ABTS to complete. */
ha->fw_options[3] |= BIT_13;
/* LED scheme. */
if (ha->flags.enable_led_scheme)
ha->fw_options[2] |= BIT_12;
/* Detect ISP6312. */
if (IS_QLA6312(ha))
ha->fw_options[2] |= BIT_13;
/* Update firmware options. */
qla2x00_set_fw_options(vha, ha->fw_options);
}
void
qla24xx_update_fw_options(scsi_qla_host_t *vha)
{
int rval;
struct qla_hw_data *ha = vha->hw;
if (IS_P3P_TYPE(ha))
return;
/* Hold status IOCBs until ABTS response received. */
if (ql2xfwholdabts)
ha->fw_options[3] |= BIT_12;
/* Update Serial Link options. */
if ((le16_to_cpu(ha->fw_seriallink_options24[0]) & BIT_0) == 0)
return;
rval = qla2x00_set_serdes_params(vha,
le16_to_cpu(ha->fw_seriallink_options24[1]),
le16_to_cpu(ha->fw_seriallink_options24[2]),
le16_to_cpu(ha->fw_seriallink_options24[3]));
if (rval != QLA_SUCCESS) {
ql_log(ql_log_warn, vha, 0x0104,
"Unable to update Serial Link options (%x).\n", rval);
}
}
void
qla2x00_config_rings(struct scsi_qla_host *vha)
{
struct qla_hw_data *ha = vha->hw;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
struct req_que *req = ha->req_q_map[0];
struct rsp_que *rsp = ha->rsp_q_map[0];
/* Setup ring parameters in initialization control block. */
ha->init_cb->request_q_outpointer = cpu_to_le16(0);
ha->init_cb->response_q_inpointer = cpu_to_le16(0);
ha->init_cb->request_q_length = cpu_to_le16(req->length);
ha->init_cb->response_q_length = cpu_to_le16(rsp->length);
ha->init_cb->request_q_address[0] = cpu_to_le32(LSD(req->dma));
ha->init_cb->request_q_address[1] = cpu_to_le32(MSD(req->dma));
ha->init_cb->response_q_address[0] = cpu_to_le32(LSD(rsp->dma));
ha->init_cb->response_q_address[1] = cpu_to_le32(MSD(rsp->dma));
WRT_REG_WORD(ISP_REQ_Q_IN(ha, reg), 0);
WRT_REG_WORD(ISP_REQ_Q_OUT(ha, reg), 0);
WRT_REG_WORD(ISP_RSP_Q_IN(ha, reg), 0);
WRT_REG_WORD(ISP_RSP_Q_OUT(ha, reg), 0);
RD_REG_WORD(ISP_RSP_Q_OUT(ha, reg)); /* PCI Posting. */
}
void
qla24xx_config_rings(struct scsi_qla_host *vha)
{
struct qla_hw_data *ha = vha->hw;
device_reg_t *reg = ISP_QUE_REG(ha, 0);
struct device_reg_2xxx __iomem *ioreg = &ha->iobase->isp;
struct qla_msix_entry *msix;
struct init_cb_24xx *icb;
uint16_t rid = 0;
struct req_que *req = ha->req_q_map[0];
struct rsp_que *rsp = ha->rsp_q_map[0];
/* Setup ring parameters in initialization control block. */
icb = (struct init_cb_24xx *)ha->init_cb;
icb->request_q_outpointer = cpu_to_le16(0);
icb->response_q_inpointer = cpu_to_le16(0);
icb->request_q_length = cpu_to_le16(req->length);
icb->response_q_length = cpu_to_le16(rsp->length);
icb->request_q_address[0] = cpu_to_le32(LSD(req->dma));
icb->request_q_address[1] = cpu_to_le32(MSD(req->dma));
icb->response_q_address[0] = cpu_to_le32(LSD(rsp->dma));
icb->response_q_address[1] = cpu_to_le32(MSD(rsp->dma));
/* Setup ATIO queue dma pointers for target mode */
icb->atio_q_inpointer = cpu_to_le16(0);
icb->atio_q_length = cpu_to_le16(ha->tgt.atio_q_length);
icb->atio_q_address[0] = cpu_to_le32(LSD(ha->tgt.atio_dma));
icb->atio_q_address[1] = cpu_to_le32(MSD(ha->tgt.atio_dma));
if (IS_SHADOW_REG_CAPABLE(ha))
icb->firmware_options_2 |= cpu_to_le32(BIT_30|BIT_29);
if (ha->mqenable || IS_QLA83XX(ha) || IS_QLA27XX(ha)) {
icb->qos = cpu_to_le16(QLA_DEFAULT_QUE_QOS);
icb->rid = cpu_to_le16(rid);
if (ha->flags.msix_enabled) {
msix = &ha->msix_entries[1];
ql_dbg(ql_dbg_init, vha, 0x00fd,
"Registering vector 0x%x for base que.\n",
msix->entry);
icb->msix = cpu_to_le16(msix->entry);
}
/* Use alternate PCI bus number */
if (MSB(rid))
icb->firmware_options_2 |= cpu_to_le32(BIT_19);
/* Use alternate PCI devfn */
if (LSB(rid))
icb->firmware_options_2 |= cpu_to_le32(BIT_18);
/* Use Disable MSIX Handshake mode for capable adapters */
if ((ha->fw_attributes & BIT_6) && (IS_MSIX_NACK_CAPABLE(ha)) &&
(ha->flags.msix_enabled)) {
icb->firmware_options_2 &= cpu_to_le32(~BIT_22);
ha->flags.disable_msix_handshake = 1;
ql_dbg(ql_dbg_init, vha, 0x00fe,
"MSIX Handshake Disable Mode turned on.\n");
} else {
icb->firmware_options_2 |= cpu_to_le32(BIT_22);
}
icb->firmware_options_2 |= cpu_to_le32(BIT_23);
WRT_REG_DWORD(&reg->isp25mq.req_q_in, 0);
WRT_REG_DWORD(&reg->isp25mq.req_q_out, 0);
WRT_REG_DWORD(&reg->isp25mq.rsp_q_in, 0);
WRT_REG_DWORD(&reg->isp25mq.rsp_q_out, 0);
} else {
WRT_REG_DWORD(&reg->isp24.req_q_in, 0);
WRT_REG_DWORD(&reg->isp24.req_q_out, 0);
WRT_REG_DWORD(&reg->isp24.rsp_q_in, 0);
WRT_REG_DWORD(&reg->isp24.rsp_q_out, 0);
}
qlt_24xx_config_rings(vha);
/* PCI posting */
RD_REG_DWORD(&ioreg->hccr);
}
/**
* qla2x00_init_rings() - Initializes firmware.
* @ha: HA context
*
* Beginning of request ring has initialization control block already built
* by nvram config routine.
*
* Returns 0 on success.
*/
int
qla2x00_init_rings(scsi_qla_host_t *vha)
{
int rval;
unsigned long flags = 0;
int cnt, que;
struct qla_hw_data *ha = vha->hw;
struct req_que *req;
struct rsp_que *rsp;
struct mid_init_cb_24xx *mid_init_cb =
(struct mid_init_cb_24xx *) ha->init_cb;
spin_lock_irqsave(&ha->hardware_lock, flags);
/* Clear outstanding commands array. */
for (que = 0; que < ha->max_req_queues; que++) {
req = ha->req_q_map[que];
if (!req || !test_bit(que, ha->req_qid_map))
continue;
req->out_ptr = (void *)(req->ring + req->length);
*req->out_ptr = 0;
for (cnt = 1; cnt < req->num_outstanding_cmds; cnt++)
req->outstanding_cmds[cnt] = NULL;
req->current_outstanding_cmd = 1;
/* Initialize firmware. */
req->ring_ptr = req->ring;
req->ring_index = 0;
req->cnt = req->length;
}
for (que = 0; que < ha->max_rsp_queues; que++) {
rsp = ha->rsp_q_map[que];
if (!rsp || !test_bit(que, ha->rsp_qid_map))
continue;
rsp->in_ptr = (void *)(rsp->ring + rsp->length);
*rsp->in_ptr = 0;
/* Initialize response queue entries */
if (IS_QLAFX00(ha))
qlafx00_init_response_q_entries(rsp);
else
qla2x00_init_response_q_entries(rsp);
}
ha->tgt.atio_ring_ptr = ha->tgt.atio_ring;
ha->tgt.atio_ring_index = 0;
/* Initialize ATIO queue entries */
qlt_init_atio_q_entries(vha);
ha->isp_ops->config_rings(vha);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
ql_dbg(ql_dbg_init, vha, 0x00d1, "Issue init firmware.\n");
if (IS_QLAFX00(ha)) {
rval = qlafx00_init_firmware(vha, ha->init_cb_size);
goto next_check;
}
/* Update any ISP specific firmware options before initialization. */
ha->isp_ops->update_fw_options(vha);
if (ha->flags.npiv_supported) {
if (ha->operating_mode == LOOP && !IS_CNA_CAPABLE(ha))
ha->max_npiv_vports = MIN_MULTI_ID_FABRIC - 1;
mid_init_cb->count = cpu_to_le16(ha->max_npiv_vports);
}
if (IS_FWI2_CAPABLE(ha)) {
mid_init_cb->options = cpu_to_le16(BIT_1);
mid_init_cb->init_cb.execution_throttle =
cpu_to_le16(ha->cur_fw_xcb_count);
/* D-Port Status */
if (IS_DPORT_CAPABLE(ha))
mid_init_cb->init_cb.firmware_options_1 |=
cpu_to_le16(BIT_7);
/* Enable FA-WWPN */
ha->flags.fawwpn_enabled =
(mid_init_cb->init_cb.firmware_options_1 & BIT_6) ? 1 : 0;
ql_dbg(ql_dbg_init, vha, 0x0141, "FA-WWPN Support: %s.\n",
(ha->flags.fawwpn_enabled) ? "enabled" : "disabled");
}
rval = qla2x00_init_firmware(vha, ha->init_cb_size);
next_check:
if (rval) {
ql_log(ql_log_fatal, vha, 0x00d2,
"Init Firmware **** FAILED ****.\n");
} else {
ql_dbg(ql_dbg_init, vha, 0x00d3,
"Init Firmware -- success.\n");
}
return (rval);
}
/**
* qla2x00_fw_ready() - Waits for firmware ready.
* @ha: HA context
*
* Returns 0 on success.
*/
static int
qla2x00_fw_ready(scsi_qla_host_t *vha)
{
int rval;
unsigned long wtime, mtime, cs84xx_time;
uint16_t min_wait; /* Minimum wait time if loop is down */
uint16_t wait_time; /* Wait time if loop is coming ready */
uint16_t state[6];
struct qla_hw_data *ha = vha->hw;
if (IS_QLAFX00(vha->hw))
return qlafx00_fw_ready(vha);
rval = QLA_SUCCESS;
/* Time to wait for loop down */
if (IS_P3P_TYPE(ha))
min_wait = 30;
else
min_wait = 20;
/*
* Firmware should take at most one RATOV to login, plus 5 seconds for
* our own processing.
*/
if ((wait_time = (ha->retry_count*ha->login_timeout) + 5) < min_wait) {
wait_time = min_wait;
}
/* Min wait time if loop down */
mtime = jiffies + (min_wait * HZ);
/* wait time before firmware ready */
wtime = jiffies + (wait_time * HZ);
/* Wait for ISP to finish LIP */
if (!vha->flags.init_done)
ql_log(ql_log_info, vha, 0x801e,
"Waiting for LIP to complete.\n");
do {
memset(state, -1, sizeof(state));
rval = qla2x00_get_firmware_state(vha, state);
if (rval == QLA_SUCCESS) {
if (state[0] < FSTATE_LOSS_OF_SYNC) {
vha->device_flags &= ~DFLG_NO_CABLE;
}
if (IS_QLA84XX(ha) && state[0] != FSTATE_READY) {
ql_dbg(ql_dbg_taskm, vha, 0x801f,
"fw_state=%x 84xx=%x.\n", state[0],
state[2]);
if ((state[2] & FSTATE_LOGGED_IN) &&
(state[2] & FSTATE_WAITING_FOR_VERIFY)) {
ql_dbg(ql_dbg_taskm, vha, 0x8028,
"Sending verify iocb.\n");
cs84xx_time = jiffies;
rval = qla84xx_init_chip(vha);
if (rval != QLA_SUCCESS) {
ql_log(ql_log_warn,
vha, 0x8007,
"Init chip failed.\n");
break;
}
/* Add time taken to initialize. */
cs84xx_time = jiffies - cs84xx_time;
wtime += cs84xx_time;
mtime += cs84xx_time;
ql_dbg(ql_dbg_taskm, vha, 0x8008,
"Increasing wait time by %ld. "
"New time %ld.\n", cs84xx_time,
wtime);
}
} else if (state[0] == FSTATE_READY) {
ql_dbg(ql_dbg_taskm, vha, 0x8037,
"F/W Ready - OK.\n");
qla2x00_get_retry_cnt(vha, &ha->retry_count,
&ha->login_timeout, &ha->r_a_tov);
rval = QLA_SUCCESS;
break;
}
rval = QLA_FUNCTION_FAILED;
if (atomic_read(&vha->loop_down_timer) &&
state[0] != FSTATE_READY) {
/* Loop down. Timeout on min_wait for states
* other than Wait for Login.
*/
if (time_after_eq(jiffies, mtime)) {
ql_log(ql_log_info, vha, 0x8038,
"Cable is unplugged...\n");
vha->device_flags |= DFLG_NO_CABLE;
break;
}
}
} else {
/* Mailbox cmd failed. Timeout on min_wait. */
if (time_after_eq(jiffies, mtime) ||
ha->flags.isp82xx_fw_hung)
break;
}
if (time_after_eq(jiffies, wtime))
break;
/* Delay for a while */
msleep(500);
} while (1);
ql_dbg(ql_dbg_taskm, vha, 0x803a,
"fw_state=%x (%x, %x, %x, %x %x) curr time=%lx.\n", state[0],
state[1], state[2], state[3], state[4], state[5], jiffies);
if (rval && !(vha->device_flags & DFLG_NO_CABLE)) {
ql_log(ql_log_warn, vha, 0x803b,
"Firmware ready **** FAILED ****.\n");
}
return (rval);
}
/*
* qla2x00_configure_hba
* Setup adapter context.
*
* Input:
* ha = adapter state pointer.
*
* Returns:
* 0 = success
*
* Context:
* Kernel context.
*/
static int
qla2x00_configure_hba(scsi_qla_host_t *vha)
{
int rval;
uint16_t loop_id;
uint16_t topo;
uint16_t sw_cap;
uint8_t al_pa;
uint8_t area;
uint8_t domain;
char connect_type[22];
struct qla_hw_data *ha = vha->hw;
unsigned long flags;
scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev);
/* Get host addresses. */
rval = qla2x00_get_adapter_id(vha,
&loop_id, &al_pa, &area, &domain, &topo, &sw_cap);
if (rval != QLA_SUCCESS) {
if (LOOP_TRANSITION(vha) || atomic_read(&ha->loop_down_timer) ||
IS_CNA_CAPABLE(ha) ||
(rval == QLA_COMMAND_ERROR && loop_id == 0x7)) {
ql_dbg(ql_dbg_disc, vha, 0x2008,
"Loop is in a transition state.\n");
} else {
ql_log(ql_log_warn, vha, 0x2009,
"Unable to get host loop ID.\n");
if (IS_FWI2_CAPABLE(ha) && (vha == base_vha) &&
(rval == QLA_COMMAND_ERROR && loop_id == 0x1b)) {
ql_log(ql_log_warn, vha, 0x1151,
"Doing link init.\n");
if (qla24xx_link_initialize(vha) == QLA_SUCCESS)
return rval;
}
set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
}
return (rval);
}
if (topo == 4) {
ql_log(ql_log_info, vha, 0x200a,
"Cannot get topology - retrying.\n");
return (QLA_FUNCTION_FAILED);
}
vha->loop_id = loop_id;
/* initialize */
ha->min_external_loopid = SNS_FIRST_LOOP_ID;
ha->operating_mode = LOOP;
ha->switch_cap = 0;
switch (topo) {
case 0:
ql_dbg(ql_dbg_disc, vha, 0x200b, "HBA in NL topology.\n");
ha->current_topology = ISP_CFG_NL;
strcpy(connect_type, "(Loop)");
break;
case 1:
ql_dbg(ql_dbg_disc, vha, 0x200c, "HBA in FL topology.\n");
ha->switch_cap = sw_cap;
ha->current_topology = ISP_CFG_FL;
strcpy(connect_type, "(FL_Port)");
break;
case 2:
ql_dbg(ql_dbg_disc, vha, 0x200d, "HBA in N P2P topology.\n");
ha->operating_mode = P2P;
ha->current_topology = ISP_CFG_N;
strcpy(connect_type, "(N_Port-to-N_Port)");
break;
case 3:
ql_dbg(ql_dbg_disc, vha, 0x200e, "HBA in F P2P topology.\n");
ha->switch_cap = sw_cap;
ha->operating_mode = P2P;
ha->current_topology = ISP_CFG_F;
strcpy(connect_type, "(F_Port)");
break;
default:
ql_dbg(ql_dbg_disc, vha, 0x200f,
"HBA in unknown topology %x, using NL.\n", topo);
ha->current_topology = ISP_CFG_NL;
strcpy(connect_type, "(Loop)");
break;
}
/* Save Host port and loop ID. */
/* byte order - Big Endian */
vha->d_id.b.domain = domain;
vha->d_id.b.area = area;
vha->d_id.b.al_pa = al_pa;
spin_lock_irqsave(&ha->vport_slock, flags);
qlt_update_vp_map(vha, SET_AL_PA);
spin_unlock_irqrestore(&ha->vport_slock, flags);
if (!vha->flags.init_done)
ql_log(ql_log_info, vha, 0x2010,
"Topology - %s, Host Loop address 0x%x.\n",
connect_type, vha->loop_id);
return(rval);
}
inline void
qla2x00_set_model_info(scsi_qla_host_t *vha, uint8_t *model, size_t len,
char *def)
{
char *st, *en;
uint16_t index;
struct qla_hw_data *ha = vha->hw;
int use_tbl = !IS_QLA24XX_TYPE(ha) && !IS_QLA25XX(ha) &&
!IS_CNA_CAPABLE(ha) && !IS_QLA2031(ha);
if (memcmp(model, BINZERO, len) != 0) {
strncpy(ha->model_number, model, len);
st = en = ha->model_number;
en += len - 1;
while (en > st) {
if (*en != 0x20 && *en != 0x00)
break;
*en-- = '\0';
}
index = (ha->pdev->subsystem_device & 0xff);
if (use_tbl &&
ha->pdev->subsystem_vendor == PCI_VENDOR_ID_QLOGIC &&
index < QLA_MODEL_NAMES)
strncpy(ha->model_desc,
qla2x00_model_name[index * 2 + 1],
sizeof(ha->model_desc) - 1);
} else {
index = (ha->pdev->subsystem_device & 0xff);
if (use_tbl &&
ha->pdev->subsystem_vendor == PCI_VENDOR_ID_QLOGIC &&
index < QLA_MODEL_NAMES) {
strcpy(ha->model_number,
qla2x00_model_name[index * 2]);
strncpy(ha->model_desc,
qla2x00_model_name[index * 2 + 1],
sizeof(ha->model_desc) - 1);
} else {
strcpy(ha->model_number, def);
}
}
if (IS_FWI2_CAPABLE(ha))
qla2xxx_get_vpd_field(vha, "\x82", ha->model_desc,
sizeof(ha->model_desc));
}
/* On sparc systems, obtain port and node WWN from firmware
* properties.
*/
static void qla2xxx_nvram_wwn_from_ofw(scsi_qla_host_t *vha, nvram_t *nv)
{
#ifdef CONFIG_SPARC
struct qla_hw_data *ha = vha->hw;
struct pci_dev *pdev = ha->pdev;
struct device_node *dp = pci_device_to_OF_node(pdev);
const u8 *val;
int len;
val = of_get_property(dp, "port-wwn", &len);
if (val && len >= WWN_SIZE)
memcpy(nv->port_name, val, WWN_SIZE);
val = of_get_property(dp, "node-wwn", &len);
if (val && len >= WWN_SIZE)
memcpy(nv->node_name, val, WWN_SIZE);
#endif
}
/*
* NVRAM configuration for ISP 2xxx
*
* Input:
* ha = adapter block pointer.
*
* Output:
* initialization control block in response_ring
* host adapters parameters in host adapter block
*
* Returns:
* 0 = success.
*/
int
qla2x00_nvram_config(scsi_qla_host_t *vha)
{
int rval;
uint8_t chksum = 0;
uint16_t cnt;
uint8_t *dptr1, *dptr2;
struct qla_hw_data *ha = vha->hw;
init_cb_t *icb = ha->init_cb;
nvram_t *nv = ha->nvram;
uint8_t *ptr = ha->nvram;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
rval = QLA_SUCCESS;
/* Determine NVRAM starting address. */
ha->nvram_size = sizeof(nvram_t);
ha->nvram_base = 0;
if (!IS_QLA2100(ha) && !IS_QLA2200(ha) && !IS_QLA2300(ha))
if ((RD_REG_WORD(&reg->ctrl_status) >> 14) == 1)
ha->nvram_base = 0x80;
/* Get NVRAM data and calculate checksum. */
ha->isp_ops->read_nvram(vha, ptr, ha->nvram_base, ha->nvram_size);
for (cnt = 0, chksum = 0; cnt < ha->nvram_size; cnt++)
chksum += *ptr++;
ql_dbg(ql_dbg_init + ql_dbg_buffer, vha, 0x010f,
"Contents of NVRAM.\n");
ql_dump_buffer(ql_dbg_init + ql_dbg_buffer, vha, 0x0110,
(uint8_t *)nv, ha->nvram_size);
/* Bad NVRAM data, set defaults parameters. */
if (chksum || nv->id[0] != 'I' || nv->id[1] != 'S' ||
nv->id[2] != 'P' || nv->id[3] != ' ' || nv->nvram_version < 1) {
/* Reset NVRAM data. */
ql_log(ql_log_warn, vha, 0x0064,
"Inconsistent NVRAM "
"detected: checksum=0x%x id=%c version=0x%x.\n",
chksum, nv->id[0], nv->nvram_version);
ql_log(ql_log_warn, vha, 0x0065,
"Falling back to "
"functioning (yet invalid -- WWPN) defaults.\n");
/*
* Set default initialization control block.
*/
memset(nv, 0, ha->nvram_size);
nv->parameter_block_version = ICB_VERSION;
if (IS_QLA23XX(ha)) {
nv->firmware_options[0] = BIT_2 | BIT_1;
nv->firmware_options[1] = BIT_7 | BIT_5;
nv->add_firmware_options[0] = BIT_5;
nv->add_firmware_options[1] = BIT_5 | BIT_4;
nv->frame_payload_size = 2048;
nv->special_options[1] = BIT_7;
} else if (IS_QLA2200(ha)) {
nv->firmware_options[0] = BIT_2 | BIT_1;
nv->firmware_options[1] = BIT_7 | BIT_5;
nv->add_firmware_options[0] = BIT_5;
nv->add_firmware_options[1] = BIT_5 | BIT_4;
nv->frame_payload_size = 1024;
} else if (IS_QLA2100(ha)) {
nv->firmware_options[0] = BIT_3 | BIT_1;
nv->firmware_options[1] = BIT_5;
nv->frame_payload_size = 1024;
}
nv->max_iocb_allocation = cpu_to_le16(256);
nv->execution_throttle = cpu_to_le16(16);
nv->retry_count = 8;
nv->retry_delay = 1;
nv->port_name[0] = 33;
nv->port_name[3] = 224;
nv->port_name[4] = 139;
qla2xxx_nvram_wwn_from_ofw(vha, nv);
nv->login_timeout = 4;
/*
* Set default host adapter parameters
*/
nv->host_p[1] = BIT_2;
nv->reset_delay = 5;
nv->port_down_retry_count = 8;
nv->max_luns_per_target = cpu_to_le16(8);
nv->link_down_timeout = 60;
rval = 1;
}
#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2)
/*
* The SN2 does not provide BIOS emulation which means you can't change
* potentially bogus BIOS settings. Force the use of default settings
* for link rate and frame size. Hope that the rest of the settings
* are valid.
*/
if (ia64_platform_is("sn2")) {
nv->frame_payload_size = 2048;
if (IS_QLA23XX(ha))
nv->special_options[1] = BIT_7;
}
#endif
/* Reset Initialization control block */
memset(icb, 0, ha->init_cb_size);
/*
* Setup driver NVRAM options.
*/
nv->firmware_options[0] |= (BIT_6 | BIT_1);
nv->firmware_options[0] &= ~(BIT_5 | BIT_4);
nv->firmware_options[1] |= (BIT_5 | BIT_0);
nv->firmware_options[1] &= ~BIT_4;
if (IS_QLA23XX(ha)) {
nv->firmware_options[0] |= BIT_2;
nv->firmware_options[0] &= ~BIT_3;
nv->special_options[0] &= ~BIT_6;
nv->add_firmware_options[1] |= BIT_5 | BIT_4;
if (IS_QLA2300(ha)) {
if (ha->fb_rev == FPM_2310) {
strcpy(ha->model_number, "QLA2310");
} else {
strcpy(ha->model_number, "QLA2300");
}
} else {
qla2x00_set_model_info(vha, nv->model_number,
sizeof(nv->model_number), "QLA23xx");
}
} else if (IS_QLA2200(ha)) {
nv->firmware_options[0] |= BIT_2;
/*
* 'Point-to-point preferred, else loop' is not a safe
* connection mode setting.
*/
if ((nv->add_firmware_options[0] & (BIT_6 | BIT_5 | BIT_4)) ==
(BIT_5 | BIT_4)) {
/* Force 'loop preferred, else point-to-point'. */
nv->add_firmware_options[0] &= ~(BIT_6 | BIT_5 | BIT_4);
nv->add_firmware_options[0] |= BIT_5;
}
strcpy(ha->model_number, "QLA22xx");
} else /*if (IS_QLA2100(ha))*/ {
strcpy(ha->model_number, "QLA2100");
}
/*
* Copy over NVRAM RISC parameter block to initialization control block.
*/
dptr1 = (uint8_t *)icb;
dptr2 = (uint8_t *)&nv->parameter_block_version;
cnt = (uint8_t *)&icb->request_q_outpointer - (uint8_t *)&icb->version;
while (cnt--)
*dptr1++ = *dptr2++;
/* Copy 2nd half. */
dptr1 = (uint8_t *)icb->add_firmware_options;
cnt = (uint8_t *)icb->reserved_3 - (uint8_t *)icb->add_firmware_options;
while (cnt--)
*dptr1++ = *dptr2++;
/* Use alternate WWN? */
if (nv->host_p[1] & BIT_7) {
memcpy(icb->node_name, nv->alternate_node_name, WWN_SIZE);
memcpy(icb->port_name, nv->alternate_port_name, WWN_SIZE);
}
/* Prepare nodename */
if ((icb->firmware_options[1] & BIT_6) == 0) {
/*
* Firmware will apply the following mask if the nodename was
* not provided.
*/
memcpy(icb->node_name, icb->port_name, WWN_SIZE);
icb->node_name[0] &= 0xF0;
}
/*
* Set host adapter parameters.
*/
/*
* BIT_7 in the host-parameters section allows for modification to
* internal driver logging.
*/
if (nv->host_p[0] & BIT_7)
ql2xextended_error_logging = QL_DBG_DEFAULT1_MASK;
ha->flags.disable_risc_code_load = ((nv->host_p[0] & BIT_4) ? 1 : 0);
/* Always load RISC code on non ISP2[12]00 chips. */
if (!IS_QLA2100(ha) && !IS_QLA2200(ha))
ha->flags.disable_risc_code_load = 0;
ha->flags.enable_lip_reset = ((nv->host_p[1] & BIT_1) ? 1 : 0);
ha->flags.enable_lip_full_login = ((nv->host_p[1] & BIT_2) ? 1 : 0);
ha->flags.enable_target_reset = ((nv->host_p[1] & BIT_3) ? 1 : 0);
ha->flags.enable_led_scheme = (nv->special_options[1] & BIT_4) ? 1 : 0;
ha->flags.disable_serdes = 0;
ha->operating_mode =
(icb->add_firmware_options[0] & (BIT_6 | BIT_5 | BIT_4)) >> 4;
memcpy(ha->fw_seriallink_options, nv->seriallink_options,
sizeof(ha->fw_seriallink_options));
/* save HBA serial number */
ha->serial0 = icb->port_name[5];
ha->serial1 = icb->port_name[6];
ha->serial2 = icb->port_name[7];
memcpy(vha->node_name, icb->node_name, WWN_SIZE);
memcpy(vha->port_name, icb->port_name, WWN_SIZE);
icb->execution_throttle = cpu_to_le16(0xFFFF);
ha->retry_count = nv->retry_count;
/* Set minimum login_timeout to 4 seconds. */
if (nv->login_timeout != ql2xlogintimeout)
nv->login_timeout = ql2xlogintimeout;
if (nv->login_timeout < 4)
nv->login_timeout = 4;
ha->login_timeout = nv->login_timeout;
/* Set minimum RATOV to 100 tenths of a second. */
ha->r_a_tov = 100;
ha->loop_reset_delay = nv->reset_delay;
/* Link Down Timeout = 0:
*
* When Port Down timer expires we will start returning
* I/O's to OS with "DID_NO_CONNECT".
*
* Link Down Timeout != 0:
*
* The driver waits for the link to come up after link down
* before returning I/Os to OS with "DID_NO_CONNECT".
*/
if (nv->link_down_timeout == 0) {
ha->loop_down_abort_time =
(LOOP_DOWN_TIME - LOOP_DOWN_TIMEOUT);
} else {
ha->link_down_timeout = nv->link_down_timeout;
ha->loop_down_abort_time =
(LOOP_DOWN_TIME - ha->link_down_timeout);
}
/*
* Need enough time to try and get the port back.
*/
ha->port_down_retry_count = nv->port_down_retry_count;
if (qlport_down_retry)
ha->port_down_retry_count = qlport_down_retry;
/* Set login_retry_count */
ha->login_retry_count = nv->retry_count;
if (ha->port_down_retry_count == nv->port_down_retry_count &&
ha->port_down_retry_count > 3)
ha->login_retry_count = ha->port_down_retry_count;
else if (ha->port_down_retry_count > (int)ha->login_retry_count)
ha->login_retry_count = ha->port_down_retry_count;
if (ql2xloginretrycount)
ha->login_retry_count = ql2xloginretrycount;
icb->lun_enables = cpu_to_le16(0);
icb->command_resource_count = 0;
icb->immediate_notify_resource_count = 0;
icb->timeout = cpu_to_le16(0);
if (IS_QLA2100(ha) || IS_QLA2200(ha)) {
/* Enable RIO */
icb->firmware_options[0] &= ~BIT_3;
icb->add_firmware_options[0] &=
~(BIT_3 | BIT_2 | BIT_1 | BIT_0);
icb->add_firmware_options[0] |= BIT_2;
icb->response_accumulation_timer = 3;
icb->interrupt_delay_timer = 5;
vha->flags.process_response_queue = 1;
} else {
/* Enable ZIO. */
if (!vha->flags.init_done) {
ha->zio_mode = icb->add_firmware_options[0] &
(BIT_3 | BIT_2 | BIT_1 | BIT_0);
ha->zio_timer = icb->interrupt_delay_timer ?
icb->interrupt_delay_timer: 2;
}
icb->add_firmware_options[0] &=
~(BIT_3 | BIT_2 | BIT_1 | BIT_0);
vha->flags.process_response_queue = 0;
if (ha->zio_mode != QLA_ZIO_DISABLED) {
ha->zio_mode = QLA_ZIO_MODE_6;
ql_log(ql_log_info, vha, 0x0068,
"ZIO mode %d enabled; timer delay (%d us).\n",
ha->zio_mode, ha->zio_timer * 100);
icb->add_firmware_options[0] |= (uint8_t)ha->zio_mode;
icb->interrupt_delay_timer = (uint8_t)ha->zio_timer;
vha->flags.process_response_queue = 1;
}
}
if (rval) {
ql_log(ql_log_warn, vha, 0x0069,
"NVRAM configuration failed.\n");
}
return (rval);
}
static void
qla2x00_rport_del(void *data)
{
fc_port_t *fcport = data;
struct fc_rport *rport;
unsigned long flags;
spin_lock_irqsave(fcport->vha->host->host_lock, flags);
rport = fcport->drport ? fcport->drport: fcport->rport;
fcport->drport = NULL;
spin_unlock_irqrestore(fcport->vha->host->host_lock, flags);
if (rport)
fc_remote_port_delete(rport);
}
/**
* qla2x00_alloc_fcport() - Allocate a generic fcport.
* @ha: HA context
* @flags: allocation flags
*
* Returns a pointer to the allocated fcport, or NULL, if none available.
*/
fc_port_t *
qla2x00_alloc_fcport(scsi_qla_host_t *vha, gfp_t flags)
{
fc_port_t *fcport;
fcport = kzalloc(sizeof(fc_port_t), flags);
if (!fcport)
return NULL;
/* Setup fcport template structure. */
fcport->vha = vha;
fcport->port_type = FCT_UNKNOWN;
fcport->loop_id = FC_NO_LOOP_ID;
qla2x00_set_fcport_state(fcport, FCS_UNCONFIGURED);
fcport->supported_classes = FC_COS_UNSPECIFIED;
return fcport;
}
/*
* qla2x00_configure_loop
* Updates Fibre Channel Device Database with what is actually on loop.
*
* Input:
* ha = adapter block pointer.
*
* Returns:
* 0 = success.
* 1 = error.
* 2 = database was full and device was not configured.
*/
static int
qla2x00_configure_loop(scsi_qla_host_t *vha)
{
int rval;
unsigned long flags, save_flags;
struct qla_hw_data *ha = vha->hw;
rval = QLA_SUCCESS;
/* Get Initiator ID */
if (test_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags)) {
rval = qla2x00_configure_hba(vha);
if (rval != QLA_SUCCESS) {
ql_dbg(ql_dbg_disc, vha, 0x2013,
"Unable to configure HBA.\n");
return (rval);
}
}
save_flags = flags = vha->dpc_flags;
ql_dbg(ql_dbg_disc, vha, 0x2014,
"Configure loop -- dpc flags = 0x%lx.\n", flags);
/*
* If we have both an RSCN and PORT UPDATE pending then handle them
* both at the same time.
*/
clear_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags);
clear_bit(RSCN_UPDATE, &vha->dpc_flags);
qla2x00_get_data_rate(vha);
/* Determine what we need to do */
if (ha->current_topology == ISP_CFG_FL &&
(test_bit(LOCAL_LOOP_UPDATE, &flags))) {
set_bit(RSCN_UPDATE, &flags);
} else if (ha->current_topology == ISP_CFG_F &&
(test_bit(LOCAL_LOOP_UPDATE, &flags))) {
set_bit(RSCN_UPDATE, &flags);
clear_bit(LOCAL_LOOP_UPDATE, &flags);
} else if (ha->current_topology == ISP_CFG_N) {
clear_bit(RSCN_UPDATE, &flags);
} else if (!vha->flags.online ||
(test_bit(ABORT_ISP_ACTIVE, &flags))) {
set_bit(RSCN_UPDATE, &flags);
set_bit(LOCAL_LOOP_UPDATE, &flags);
}
if (test_bit(LOCAL_LOOP_UPDATE, &flags)) {
if (test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags)) {
ql_dbg(ql_dbg_disc, vha, 0x2015,
"Loop resync needed, failing.\n");
rval = QLA_FUNCTION_FAILED;
} else
rval = qla2x00_configure_local_loop(vha);
}
if (rval == QLA_SUCCESS && test_bit(RSCN_UPDATE, &flags)) {
if (LOOP_TRANSITION(vha)) {
ql_dbg(ql_dbg_disc, vha, 0x201e,
"Needs RSCN update and loop transition.\n");
rval = QLA_FUNCTION_FAILED;
}
else
rval = qla2x00_configure_fabric(vha);
}
if (rval == QLA_SUCCESS) {
if (atomic_read(&vha->loop_down_timer) ||
test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags)) {
rval = QLA_FUNCTION_FAILED;
} else {
atomic_set(&vha->loop_state, LOOP_READY);
ql_dbg(ql_dbg_disc, vha, 0x2069,
"LOOP READY.\n");
/*
* Process any ATIO queue entries that came in
* while we weren't online.
*/
if (qla_tgt_mode_enabled(vha)) {
if (IS_QLA27XX(ha) || IS_QLA83XX(ha)) {
spin_lock_irqsave(&ha->tgt.atio_lock,
flags);
qlt_24xx_process_atio_queue(vha, 0);
spin_unlock_irqrestore(
&ha->tgt.atio_lock, flags);
} else {
spin_lock_irqsave(&ha->hardware_lock,
flags);
qlt_24xx_process_atio_queue(vha, 1);
spin_unlock_irqrestore(
&ha->hardware_lock, flags);
}
}
}
}
if (rval) {
ql_dbg(ql_dbg_disc, vha, 0x206a,
"%s *** FAILED ***.\n", __func__);
} else {
ql_dbg(ql_dbg_disc, vha, 0x206b,
"%s: exiting normally.\n", __func__);
}
/* Restore state if a resync event occurred during processing */
if (test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags)) {
if (test_bit(LOCAL_LOOP_UPDATE, &save_flags))
set_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags);
if (test_bit(RSCN_UPDATE, &save_flags)) {
set_bit(RSCN_UPDATE, &vha->dpc_flags);
}
}
return (rval);
}
/*
* qla2x00_configure_local_loop
* Updates Fibre Channel Device Database with local loop devices.
*
* Input:
* ha = adapter block pointer.
*
* Returns:
* 0 = success.
*/
static int
qla2x00_configure_local_loop(scsi_qla_host_t *vha)
{
int rval, rval2;
int found_devs;
int found;
fc_port_t *fcport, *new_fcport;
uint16_t index;
uint16_t entries;
char *id_iter;
uint16_t loop_id;
uint8_t domain, area, al_pa;
struct qla_hw_data *ha = vha->hw;
found_devs = 0;
new_fcport = NULL;
entries = MAX_FIBRE_DEVICES_LOOP;
/* Get list of logged in devices. */
memset(ha->gid_list, 0, qla2x00_gid_list_size(ha));
rval = qla2x00_get_id_list(vha, ha->gid_list, ha->gid_list_dma,
&entries);
if (rval != QLA_SUCCESS)
goto cleanup_allocation;
ql_dbg(ql_dbg_disc, vha, 0x2017,
"Entries in ID list (%d).\n", entries);
ql_dump_buffer(ql_dbg_disc + ql_dbg_buffer, vha, 0x2075,
(uint8_t *)ha->gid_list,
entries * sizeof(struct gid_list_info));
/* Allocate temporary fcport for any new fcports discovered. */
new_fcport = qla2x00_alloc_fcport(vha, GFP_KERNEL);
if (new_fcport == NULL) {
ql_log(ql_log_warn, vha, 0x2018,
"Memory allocation failed for fcport.\n");
rval = QLA_MEMORY_ALLOC_FAILED;
goto cleanup_allocation;
}
new_fcport->flags &= ~FCF_FABRIC_DEVICE;
/*
* Mark local devices that were present with FCF_DEVICE_LOST for now.
*/
list_for_each_entry(fcport, &vha->vp_fcports, list) {
if (atomic_read(&fcport->state) == FCS_ONLINE &&
fcport->port_type != FCT_BROADCAST &&
(fcport->flags & FCF_FABRIC_DEVICE) == 0) {
ql_dbg(ql_dbg_disc, vha, 0x2019,
"Marking port lost loop_id=0x%04x.\n",
fcport->loop_id);
qla2x00_set_fcport_state(fcport, FCS_DEVICE_LOST);
}
}
/* Add devices to port list. */
id_iter = (char *)ha->gid_list;
for (index = 0; index < entries; index++) {
domain = ((struct gid_list_info *)id_iter)->domain;
area = ((struct gid_list_info *)id_iter)->area;
al_pa = ((struct gid_list_info *)id_iter)->al_pa;
if (IS_QLA2100(ha) || IS_QLA2200(ha))
loop_id = (uint16_t)
((struct gid_list_info *)id_iter)->loop_id_2100;
else
loop_id = le16_to_cpu(
((struct gid_list_info *)id_iter)->loop_id);
id_iter += ha->gid_list_info_size;
/* Bypass reserved domain fields. */
if ((domain & 0xf0) == 0xf0)
continue;
/* Bypass if not same domain and area of adapter. */
if (area && domain &&
(area != vha->d_id.b.area || domain != vha->d_id.b.domain))
continue;
/* Bypass invalid local loop ID. */
if (loop_id > LAST_LOCAL_LOOP_ID)
continue;
memset(new_fcport, 0, sizeof(fc_port_t));
/* Fill in member data. */
new_fcport->d_id.b.domain = domain;
new_fcport->d_id.b.area = area;
new_fcport->d_id.b.al_pa = al_pa;
new_fcport->loop_id = loop_id;
rval2 = qla2x00_get_port_database(vha, new_fcport, 0);
if (rval2 != QLA_SUCCESS) {
ql_dbg(ql_dbg_disc, vha, 0x201a,
"Failed to retrieve fcport information "
"-- get_port_database=%x, loop_id=0x%04x.\n",
rval2, new_fcport->loop_id);
ql_dbg(ql_dbg_disc, vha, 0x201b,
"Scheduling resync.\n");
set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
continue;
}
/* Check for matching device in port list. */
found = 0;
fcport = NULL;
list_for_each_entry(fcport, &vha->vp_fcports, list) {
if (memcmp(new_fcport->port_name, fcport->port_name,
WWN_SIZE))
continue;
fcport->flags &= ~FCF_FABRIC_DEVICE;
fcport->loop_id = new_fcport->loop_id;
fcport->port_type = new_fcport->port_type;
fcport->d_id.b24 = new_fcport->d_id.b24;
memcpy(fcport->node_name, new_fcport->node_name,
WWN_SIZE);
found++;
break;
}
if (!found) {
/* New device, add to fcports list. */
list_add_tail(&new_fcport->list, &vha->vp_fcports);
/* Allocate a new replacement fcport. */
fcport = new_fcport;
new_fcport = qla2x00_alloc_fcport(vha, GFP_KERNEL);
if (new_fcport == NULL) {
ql_log(ql_log_warn, vha, 0x201c,
"Failed to allocate memory for fcport.\n");
rval = QLA_MEMORY_ALLOC_FAILED;
goto cleanup_allocation;
}
new_fcport->flags &= ~FCF_FABRIC_DEVICE;
}
/* Base iIDMA settings on HBA port speed. */
fcport->fp_speed = ha->link_data_rate;
qla2x00_update_fcport(vha, fcport);
found_devs++;
}
cleanup_allocation:
kfree(new_fcport);
if (rval != QLA_SUCCESS) {
ql_dbg(ql_dbg_disc, vha, 0x201d,
"Configure local loop error exit: rval=%x.\n", rval);
}
return (rval);
}
static void
qla2x00_iidma_fcport(scsi_qla_host_t *vha, fc_port_t *fcport)
{
int rval;
uint16_t mb[MAILBOX_REGISTER_COUNT];
struct qla_hw_data *ha = vha->hw;
if (!IS_IIDMA_CAPABLE(ha))
return;
if (atomic_read(&fcport->state) != FCS_ONLINE)
return;
if (fcport->fp_speed == PORT_SPEED_UNKNOWN ||
fcport->fp_speed > ha->link_data_rate)
return;
rval = qla2x00_set_idma_speed(vha, fcport->loop_id, fcport->fp_speed,
mb);
if (rval != QLA_SUCCESS) {
ql_dbg(ql_dbg_disc, vha, 0x2004,
"Unable to adjust iIDMA %8phN -- %04x %x %04x %04x.\n",
fcport->port_name, rval, fcport->fp_speed, mb[0], mb[1]);
} else {
ql_dbg(ql_dbg_disc, vha, 0x2005,
"iIDMA adjusted to %s GB/s on %8phN.\n",
qla2x00_get_link_speed_str(ha, fcport->fp_speed),
fcport->port_name);
}
}
static void
qla2x00_reg_remote_port(scsi_qla_host_t *vha, fc_port_t *fcport)
{
struct fc_rport_identifiers rport_ids;
struct fc_rport *rport;
unsigned long flags;
rport_ids.node_name = wwn_to_u64(fcport->node_name);
rport_ids.port_name = wwn_to_u64(fcport->port_name);
rport_ids.port_id = fcport->d_id.b.domain << 16 |
fcport->d_id.b.area << 8 | fcport->d_id.b.al_pa;
rport_ids.roles = FC_RPORT_ROLE_UNKNOWN;
fcport->rport = rport = fc_remote_port_add(vha->host, 0, &rport_ids);
if (!rport) {
ql_log(ql_log_warn, vha, 0x2006,
"Unable to allocate fc remote port.\n");
return;
}
/*
* Create target mode FC NEXUS in qla_target.c if target mode is
* enabled..
*/
qlt_fc_port_added(vha, fcport);
spin_lock_irqsave(fcport->vha->host->host_lock, flags);
*((fc_port_t **)rport->dd_data) = fcport;
spin_unlock_irqrestore(fcport->vha->host->host_lock, flags);
rport->supported_classes = fcport->supported_classes;
rport_ids.roles = FC_RPORT_ROLE_UNKNOWN;
if (fcport->port_type == FCT_INITIATOR)
rport_ids.roles |= FC_RPORT_ROLE_FCP_INITIATOR;
if (fcport->port_type == FCT_TARGET)
rport_ids.roles |= FC_RPORT_ROLE_FCP_TARGET;
fc_remote_port_rolechg(rport, rport_ids.roles);
}
/*
* qla2x00_update_fcport
* Updates device on list.
*
* Input:
* ha = adapter block pointer.
* fcport = port structure pointer.
*
* Return:
* 0 - Success
* BIT_0 - error
*
* Context:
* Kernel context.
*/
void
qla2x00_update_fcport(scsi_qla_host_t *vha, fc_port_t *fcport)
{
fcport->vha = vha;
if (IS_QLAFX00(vha->hw)) {
qla2x00_set_fcport_state(fcport, FCS_ONLINE);
goto reg_port;
}
fcport->login_retry = 0;
fcport->flags &= ~(FCF_LOGIN_NEEDED | FCF_ASYNC_SENT);
qla2x00_set_fcport_state(fcport, FCS_ONLINE);
qla2x00_iidma_fcport(vha, fcport);
qla24xx_update_fcport_fcp_prio(vha, fcport);
reg_port:
if (qla_ini_mode_enabled(vha))
qla2x00_reg_remote_port(vha, fcport);
else {
/*
* Create target mode FC NEXUS in qla_target.c
*/
qlt_fc_port_added(vha, fcport);
}
}
/*
* qla2x00_configure_fabric
* Setup SNS devices with loop ID's.
*
* Input:
* ha = adapter block pointer.
*
* Returns:
* 0 = success.
* BIT_0 = error
*/
static int
qla2x00_configure_fabric(scsi_qla_host_t *vha)
{
int rval;
fc_port_t *fcport, *fcptemp;
uint16_t next_loopid;
uint16_t mb[MAILBOX_REGISTER_COUNT];
uint16_t loop_id;
LIST_HEAD(new_fcports);
struct qla_hw_data *ha = vha->hw;
struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev);
int discovery_gen;
/* If FL port exists, then SNS is present */
if (IS_FWI2_CAPABLE(ha))
loop_id = NPH_F_PORT;
else
loop_id = SNS_FL_PORT;
rval = qla2x00_get_port_name(vha, loop_id, vha->fabric_node_name, 1);
if (rval != QLA_SUCCESS) {
ql_dbg(ql_dbg_disc, vha, 0x201f,
"MBX_GET_PORT_NAME failed, No FL Port.\n");
vha->device_flags &= ~SWITCH_FOUND;
return (QLA_SUCCESS);
}
vha->device_flags |= SWITCH_FOUND;
do {
/* FDMI support. */
if (ql2xfdmienable &&
test_and_clear_bit(REGISTER_FDMI_NEEDED, &vha->dpc_flags))
qla2x00_fdmi_register(vha);
/* Ensure we are logged into the SNS. */
if (IS_FWI2_CAPABLE(ha))
loop_id = NPH_SNS;
else
loop_id = SIMPLE_NAME_SERVER;
rval = ha->isp_ops->fabric_login(vha, loop_id, 0xff, 0xff,
0xfc, mb, BIT_1|BIT_0);
if (rval != QLA_SUCCESS) {
set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
return rval;
}
if (mb[0] != MBS_COMMAND_COMPLETE) {
ql_dbg(ql_dbg_disc, vha, 0x2042,
"Failed SNS login: loop_id=%x mb[0]=%x mb[1]=%x mb[2]=%x "
"mb[6]=%x mb[7]=%x.\n", loop_id, mb[0], mb[1],
mb[2], mb[6], mb[7]);
return (QLA_SUCCESS);
}
if (test_and_clear_bit(REGISTER_FC4_NEEDED, &vha->dpc_flags)) {
if (qla2x00_rft_id(vha)) {
/* EMPTY */
ql_dbg(ql_dbg_disc, vha, 0x2045,
"Register FC-4 TYPE failed.\n");
}
if (qla2x00_rff_id(vha)) {
/* EMPTY */
ql_dbg(ql_dbg_disc, vha, 0x2049,
"Register FC-4 Features failed.\n");
}
if (qla2x00_rnn_id(vha)) {
/* EMPTY */
ql_dbg(ql_dbg_disc, vha, 0x204f,
"Register Node Name failed.\n");
} else if (qla2x00_rsnn_nn(vha)) {
/* EMPTY */
ql_dbg(ql_dbg_disc, vha, 0x2053,
"Register Symobilic Node Name failed.\n");
}
}
#define QLA_FCPORT_SCAN 1
#define QLA_FCPORT_FOUND 2
list_for_each_entry(fcport, &vha->vp_fcports, list) {
fcport->scan_state = QLA_FCPORT_SCAN;
}
/* Mark the time right before querying FW for connected ports.
* This process is long, asynchronous and by the time it's done,
* collected information might not be accurate anymore. E.g.
* disconnected port might have re-connected and a brand new
* session has been created. In this case session's generation
* will be newer than discovery_gen. */
qlt_do_generation_tick(vha, &discovery_gen);
rval = qla2x00_find_all_fabric_devs(vha, &new_fcports);
if (rval != QLA_SUCCESS)
break;
/*
* Logout all previous fabric devices marked lost, except
* FCP2 devices.
*/
list_for_each_entry(fcport, &vha->vp_fcports, list) {
if (test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags))
break;
if ((fcport->flags & FCF_FABRIC_DEVICE) == 0)
continue;
if (fcport->scan_state == QLA_FCPORT_SCAN) {
if (qla_ini_mode_enabled(base_vha) &&
atomic_read(&fcport->state) == FCS_ONLINE) {
qla2x00_mark_device_lost(vha, fcport,
ql2xplogiabsentdevice, 0);
if (fcport->loop_id != FC_NO_LOOP_ID &&
(fcport->flags & FCF_FCP2_DEVICE) == 0 &&
fcport->port_type != FCT_INITIATOR &&
fcport->port_type != FCT_BROADCAST) {
ha->isp_ops->fabric_logout(vha,
fcport->loop_id,
fcport->d_id.b.domain,
fcport->d_id.b.area,
fcport->d_id.b.al_pa);
qla2x00_clear_loop_id(fcport);
}
} else if (!qla_ini_mode_enabled(base_vha)) {
/*
* In target mode, explicitly kill
* sessions and log out of devices
* that are gone, so that we don't
* end up with an initiator using the
* wrong ACL (if the fabric recycles
* an FC address and we have a stale
* session around) and so that we don't
* report initiators that are no longer
* on the fabric.
*/
ql_dbg(ql_dbg_tgt_mgt, vha, 0xf077,
"port gone, logging out/killing session: "
"%8phC state 0x%x flags 0x%x fc4_type 0x%x "
"scan_state %d\n",
fcport->port_name,
atomic_read(&fcport->state),
fcport->flags, fcport->fc4_type,
fcport->scan_state);
qlt_fc_port_deleted(vha, fcport,
discovery_gen);
}
}
}
/* Starting free loop ID. */
next_loopid = ha->min_external_loopid;
/*
* Scan through our port list and login entries that need to be
* logged in.
*/
list_for_each_entry(fcport, &vha->vp_fcports, list) {
if (atomic_read(&vha->loop_down_timer) ||
test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags))
break;
if ((fcport->flags & FCF_FABRIC_DEVICE) == 0 ||
(fcport->flags & FCF_LOGIN_NEEDED) == 0)
continue;
/*
* If we're not an initiator, skip looking for devices
* and logging in. There's no reason for us to do it,
* and it seems to actively cause problems in target
* mode if we race with the initiator logging into us
* (we might get the "port ID used" status back from
* our login command and log out the initiator, which
* seems to cause havoc).
*/
if (!qla_ini_mode_enabled(base_vha)) {
if (fcport->scan_state == QLA_FCPORT_FOUND) {
ql_dbg(ql_dbg_tgt_mgt, vha, 0xf078,
"port %8phC state 0x%x flags 0x%x fc4_type 0x%x "
"scan_state %d (initiator mode disabled; skipping "
"login)\n", fcport->port_name,
atomic_read(&fcport->state),
fcport->flags, fcport->fc4_type,
fcport->scan_state);
}
continue;
}
if (fcport->loop_id == FC_NO_LOOP_ID) {
fcport->loop_id = next_loopid;
rval = qla2x00_find_new_loop_id(
base_vha, fcport);
if (rval != QLA_SUCCESS) {
/* Ran out of IDs to use */
break;
}
}
/* Login and update database */
qla2x00_fabric_dev_login(vha, fcport, &next_loopid);
}
/* Exit if out of loop IDs. */
if (rval != QLA_SUCCESS) {
break;
}
/*
* Login and add the new devices to our port list.
*/
list_for_each_entry_safe(fcport, fcptemp, &new_fcports, list) {
if (atomic_read(&vha->loop_down_timer) ||
test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags))
break;
/*
* If we're not an initiator, skip looking for devices
* and logging in. There's no reason for us to do it,
* and it seems to actively cause problems in target
* mode if we race with the initiator logging into us
* (we might get the "port ID used" status back from
* our login command and log out the initiator, which
* seems to cause havoc).
*/
if (qla_ini_mode_enabled(base_vha)) {
/* Find a new loop ID to use. */
fcport->loop_id = next_loopid;
rval = qla2x00_find_new_loop_id(base_vha,
fcport);
if (rval != QLA_SUCCESS) {
/* Ran out of IDs to use */
break;
}
/* Login and update database */
qla2x00_fabric_dev_login(vha, fcport,
&next_loopid);
} else {
ql_dbg(ql_dbg_tgt_mgt, vha, 0xf079,
"new port %8phC state 0x%x flags 0x%x fc4_type "
"0x%x scan_state %d (initiator mode disabled; "
"skipping login)\n",
fcport->port_name,
atomic_read(&fcport->state),
fcport->flags, fcport->fc4_type,
fcport->scan_state);
}
list_move_tail(&fcport->list, &vha->vp_fcports);
}
} while (0);
/* Free all new device structures not processed. */
list_for_each_entry_safe(fcport, fcptemp, &new_fcports, list) {
list_del(&fcport->list);
kfree(fcport);
}
if (rval) {
ql_dbg(ql_dbg_disc, vha, 0x2068,
"Configure fabric error exit rval=%d.\n", rval);
}
return (rval);
}
/*
* qla2x00_find_all_fabric_devs
*
* Input:
* ha = adapter block pointer.
* dev = database device entry pointer.
*
* Returns:
* 0 = success.
*
* Context:
* Kernel context.
*/
static int
qla2x00_find_all_fabric_devs(scsi_qla_host_t *vha,
struct list_head *new_fcports)
{
int rval;
uint16_t loop_id;
fc_port_t *fcport, *new_fcport, *fcptemp;
int found;
sw_info_t *swl;
int swl_idx;
int first_dev, last_dev;
port_id_t wrap = {}, nxt_d_id;
struct qla_hw_data *ha = vha->hw;
struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev);
rval = QLA_SUCCESS;
/* Try GID_PT to get device list, else GAN. */
if (!ha->swl)
ha->swl = kcalloc(ha->max_fibre_devices, sizeof(sw_info_t),
GFP_KERNEL);
swl = ha->swl;
if (!swl) {
/*EMPTY*/
ql_dbg(ql_dbg_disc, vha, 0x2054,
"GID_PT allocations failed, fallback on GA_NXT.\n");
} else {
memset(swl, 0, ha->max_fibre_devices * sizeof(sw_info_t));
if (qla2x00_gid_pt(vha, swl) != QLA_SUCCESS) {
swl = NULL;
} else if (qla2x00_gpn_id(vha, swl) != QLA_SUCCESS) {
swl = NULL;
} else if (qla2x00_gnn_id(vha, swl) != QLA_SUCCESS) {
swl = NULL;
} else if (ql2xiidmaenable &&
qla2x00_gfpn_id(vha, swl) == QLA_SUCCESS) {
qla2x00_gpsc(vha, swl);
}
/* If other queries succeeded probe for FC-4 type */
if (swl)
qla2x00_gff_id(vha, swl);
}
swl_idx = 0;
/* Allocate temporary fcport for any new fcports discovered. */
new_fcport = qla2x00_alloc_fcport(vha, GFP_KERNEL);
if (new_fcport == NULL) {
ql_log(ql_log_warn, vha, 0x205e,
"Failed to allocate memory for fcport.\n");
return (QLA_MEMORY_ALLOC_FAILED);
}
new_fcport->flags |= (FCF_FABRIC_DEVICE | FCF_LOGIN_NEEDED);
/* Set start port ID scan at adapter ID. */
first_dev = 1;
last_dev = 0;
/* Starting free loop ID. */
loop_id = ha->min_external_loopid;
for (; loop_id <= ha->max_loop_id; loop_id++) {
if (qla2x00_is_reserved_id(vha, loop_id))
continue;
if (ha->current_topology == ISP_CFG_FL &&
(atomic_read(&vha->loop_down_timer) ||
LOOP_TRANSITION(vha))) {
atomic_set(&vha->loop_down_timer, 0);
set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
set_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags);
break;
}
if (swl != NULL) {
if (last_dev) {
wrap.b24 = new_fcport->d_id.b24;
} else {
new_fcport->d_id.b24 = swl[swl_idx].d_id.b24;
memcpy(new_fcport->node_name,
swl[swl_idx].node_name, WWN_SIZE);
memcpy(new_fcport->port_name,
swl[swl_idx].port_name, WWN_SIZE);
memcpy(new_fcport->fabric_port_name,
swl[swl_idx].fabric_port_name, WWN_SIZE);
new_fcport->fp_speed = swl[swl_idx].fp_speed;
new_fcport->fc4_type = swl[swl_idx].fc4_type;
if (swl[swl_idx].d_id.b.rsvd_1 != 0) {
last_dev = 1;
}
swl_idx++;
}
} else {
/* Send GA_NXT to the switch */
rval = qla2x00_ga_nxt(vha, new_fcport);
if (rval != QLA_SUCCESS) {
ql_log(ql_log_warn, vha, 0x2064,
"SNS scan failed -- assuming "
"zero-entry result.\n");
list_for_each_entry_safe(fcport, fcptemp,
new_fcports, list) {
list_del(&fcport->list);
kfree(fcport);
}
rval = QLA_SUCCESS;
break;
}
}
/* If wrap on switch device list, exit. */
if (first_dev) {
wrap.b24 = new_fcport->d_id.b24;
first_dev = 0;
} else if (new_fcport->d_id.b24 == wrap.b24) {
ql_dbg(ql_dbg_disc, vha, 0x2065,
"Device wrap (%02x%02x%02x).\n",
new_fcport->d_id.b.domain,
new_fcport->d_id.b.area,
new_fcport->d_id.b.al_pa);
break;
}
/* Bypass if same physical adapter. */
if (new_fcport->d_id.b24 == base_vha->d_id.b24)
continue;
/* Bypass virtual ports of the same host. */
if (qla2x00_is_a_vp_did(vha, new_fcport->d_id.b24))
continue;
/* Bypass if same domain and area of adapter. */
if (((new_fcport->d_id.b24 & 0xffff00) ==
(vha->d_id.b24 & 0xffff00)) && ha->current_topology ==
ISP_CFG_FL)
continue;
/* Bypass reserved domain fields. */
if ((new_fcport->d_id.b.domain & 0xf0) == 0xf0)
continue;
/* Bypass ports whose FCP-4 type is not FCP_SCSI */
if (ql2xgffidenable &&
(new_fcport->fc4_type != FC4_TYPE_FCP_SCSI &&
new_fcport->fc4_type != FC4_TYPE_UNKNOWN))
continue;
/* Locate matching device in database. */
found = 0;
list_for_each_entry(fcport, &vha->vp_fcports, list) {
if (memcmp(new_fcport->port_name, fcport->port_name,
WWN_SIZE))
continue;
fcport->scan_state = QLA_FCPORT_FOUND;
found++;
/* Update port state. */
memcpy(fcport->fabric_port_name,
new_fcport->fabric_port_name, WWN_SIZE);
fcport->fp_speed = new_fcport->fp_speed;
/*
* If address the same and state FCS_ONLINE
* (or in target mode), nothing changed.
*/
if (fcport->d_id.b24 == new_fcport->d_id.b24 &&
(atomic_read(&fcport->state) == FCS_ONLINE ||
!qla_ini_mode_enabled(base_vha))) {
break;
}
/*
* If device was not a fabric device before.
*/
if ((fcport->flags & FCF_FABRIC_DEVICE) == 0) {
fcport->d_id.b24 = new_fcport->d_id.b24;
qla2x00_clear_loop_id(fcport);
fcport->flags |= (FCF_FABRIC_DEVICE |
FCF_LOGIN_NEEDED);
break;
}
/*
* Port ID changed or device was marked to be updated;
* Log it out if still logged in and mark it for
* relogin later.
*/
if (!qla_ini_mode_enabled(base_vha)) {
ql_dbg(ql_dbg_tgt_mgt, vha, 0xf080,
"port changed FC ID, %8phC"
" old %x:%x:%x (loop_id 0x%04x)-> new %x:%x:%x\n",
fcport->port_name,
fcport->d_id.b.domain,
fcport->d_id.b.area,
fcport->d_id.b.al_pa,
fcport->loop_id,
new_fcport->d_id.b.domain,
new_fcport->d_id.b.area,
new_fcport->d_id.b.al_pa);
fcport->d_id.b24 = new_fcport->d_id.b24;
break;
}
fcport->d_id.b24 = new_fcport->d_id.b24;
fcport->flags |= FCF_LOGIN_NEEDED;
if (fcport->loop_id != FC_NO_LOOP_ID &&
(fcport->flags & FCF_FCP2_DEVICE) == 0 &&
(fcport->flags & FCF_ASYNC_SENT) == 0 &&
fcport->port_type != FCT_INITIATOR &&
fcport->port_type != FCT_BROADCAST) {
ha->isp_ops->fabric_logout(vha, fcport->loop_id,
fcport->d_id.b.domain, fcport->d_id.b.area,
fcport->d_id.b.al_pa);
qla2x00_clear_loop_id(fcport);
}
break;
}
if (found)
continue;
/* If device was not in our fcports list, then add it. */
new_fcport->scan_state = QLA_FCPORT_FOUND;
list_add_tail(&new_fcport->list, new_fcports);
/* Allocate a new replacement fcport. */
nxt_d_id.b24 = new_fcport->d_id.b24;
new_fcport = qla2x00_alloc_fcport(vha, GFP_KERNEL);
if (new_fcport == NULL) {
ql_log(ql_log_warn, vha, 0x2066,
"Memory allocation failed for fcport.\n");
return (QLA_MEMORY_ALLOC_FAILED);
}
new_fcport->flags |= (FCF_FABRIC_DEVICE | FCF_LOGIN_NEEDED);
new_fcport->d_id.b24 = nxt_d_id.b24;
}
kfree(new_fcport);
return (rval);
}
/*
* qla2x00_find_new_loop_id
* Scan through our port list and find a new usable loop ID.
*
* Input:
* ha: adapter state pointer.
* dev: port structure pointer.
*
* Returns:
* qla2x00 local function return status code.
*
* Context:
* Kernel context.
*/
int
qla2x00_find_new_loop_id(scsi_qla_host_t *vha, fc_port_t *dev)
{
int rval;
struct qla_hw_data *ha = vha->hw;
unsigned long flags = 0;
rval = QLA_SUCCESS;
spin_lock_irqsave(&ha->vport_slock, flags);
dev->loop_id = find_first_zero_bit(ha->loop_id_map,
LOOPID_MAP_SIZE);
if (dev->loop_id >= LOOPID_MAP_SIZE ||
qla2x00_is_reserved_id(vha, dev->loop_id)) {
dev->loop_id = FC_NO_LOOP_ID;
rval = QLA_FUNCTION_FAILED;
} else
set_bit(dev->loop_id, ha->loop_id_map);
spin_unlock_irqrestore(&ha->vport_slock, flags);
if (rval == QLA_SUCCESS)
ql_dbg(ql_dbg_disc, dev->vha, 0x2086,
"Assigning new loopid=%x, portid=%x.\n",
dev->loop_id, dev->d_id.b24);
else
ql_log(ql_log_warn, dev->vha, 0x2087,
"No loop_id's available, portid=%x.\n",
dev->d_id.b24);
return (rval);
}
/*
* qla2x00_fabric_dev_login
* Login fabric target device and update FC port database.
*
* Input:
* ha: adapter state pointer.
* fcport: port structure list pointer.
* next_loopid: contains value of a new loop ID that can be used
* by the next login attempt.
*
* Returns:
* qla2x00 local function return status code.
*
* Context:
* Kernel context.
*/
static int
qla2x00_fabric_dev_login(scsi_qla_host_t *vha, fc_port_t *fcport,
uint16_t *next_loopid)
{
int rval;
uint8_t opts;
struct qla_hw_data *ha = vha->hw;
rval = QLA_SUCCESS;
if (IS_ALOGIO_CAPABLE(ha)) {
if (fcport->flags & FCF_ASYNC_SENT)
return rval;
fcport->flags |= FCF_ASYNC_SENT;
rval = qla2x00_post_async_login_work(vha, fcport, NULL);
if (!rval)
return rval;
}
fcport->flags &= ~FCF_ASYNC_SENT;
rval = qla2x00_fabric_login(vha, fcport, next_loopid);
if (rval == QLA_SUCCESS) {
/* Send an ADISC to FCP2 devices.*/
opts = 0;
if (fcport->flags & FCF_FCP2_DEVICE)
opts |= BIT_1;
rval = qla2x00_get_port_database(vha, fcport, opts);
if (rval != QLA_SUCCESS) {
ha->isp_ops->fabric_logout(vha, fcport->loop_id,
fcport->d_id.b.domain, fcport->d_id.b.area,
fcport->d_id.b.al_pa);
qla2x00_mark_device_lost(vha, fcport, 1, 0);
} else {
qla2x00_update_fcport(vha, fcport);
}
} else {
/* Retry Login. */
qla2x00_mark_device_lost(vha, fcport, 1, 0);
}
return (rval);
}
/*
* qla2x00_fabric_login
* Issue fabric login command.
*
* Input:
* ha = adapter block pointer.
* device = pointer to FC device type structure.
*
* Returns:
* 0 - Login successfully
* 1 - Login failed
* 2 - Initiator device
* 3 - Fatal error
*/
int
qla2x00_fabric_login(scsi_qla_host_t *vha, fc_port_t *fcport,
uint16_t *next_loopid)
{
int rval;
int retry;
uint16_t tmp_loopid;
uint16_t mb[MAILBOX_REGISTER_COUNT];
struct qla_hw_data *ha = vha->hw;
retry = 0;
tmp_loopid = 0;
for (;;) {
ql_dbg(ql_dbg_disc, vha, 0x2000,
"Trying Fabric Login w/loop id 0x%04x for port "
"%02x%02x%02x.\n",
fcport->loop_id, fcport->d_id.b.domain,
fcport->d_id.b.area, fcport->d_id.b.al_pa);
/* Login fcport on switch. */
rval = ha->isp_ops->fabric_login(vha, fcport->loop_id,
fcport->d_id.b.domain, fcport->d_id.b.area,
fcport->d_id.b.al_pa, mb, BIT_0);
if (rval != QLA_SUCCESS) {
return rval;
}
if (mb[0] == MBS_PORT_ID_USED) {
/*
* Device has another loop ID. The firmware team
* recommends the driver perform an implicit login with
* the specified ID again. The ID we just used is save
* here so we return with an ID that can be tried by
* the next login.
*/
retry++;
tmp_loopid = fcport->loop_id;
fcport->loop_id = mb[1];
ql_dbg(ql_dbg_disc, vha, 0x2001,
"Fabric Login: port in use - next loop "
"id=0x%04x, port id= %02x%02x%02x.\n",
fcport->loop_id, fcport->d_id.b.domain,
fcport->d_id.b.area, fcport->d_id.b.al_pa);
} else if (mb[0] == MBS_COMMAND_COMPLETE) {
/*
* Login succeeded.
*/
if (retry) {
/* A retry occurred before. */
*next_loopid = tmp_loopid;
} else {
/*
* No retry occurred before. Just increment the
* ID value for next login.
*/
*next_loopid = (fcport->loop_id + 1);
}
if (mb[1] & BIT_0) {
fcport->port_type = FCT_INITIATOR;
} else {
fcport->port_type = FCT_TARGET;
if (mb[1] & BIT_1) {
fcport->flags |= FCF_FCP2_DEVICE;
}
}
if (mb[10] & BIT_0)
fcport->supported_classes |= FC_COS_CLASS2;
if (mb[10] & BIT_1)
fcport->supported_classes |= FC_COS_CLASS3;
if (IS_FWI2_CAPABLE(ha)) {
if (mb[10] & BIT_7)
fcport->flags |=
FCF_CONF_COMP_SUPPORTED;
}
rval = QLA_SUCCESS;
break;
} else if (mb[0] == MBS_LOOP_ID_USED) {
/*
* Loop ID already used, try next loop ID.
*/
fcport->loop_id++;
rval = qla2x00_find_new_loop_id(vha, fcport);
if (rval != QLA_SUCCESS) {
/* Ran out of loop IDs to use */
break;
}
} else if (mb[0] == MBS_COMMAND_ERROR) {
/*
* Firmware possibly timed out during login. If NO
* retries are left to do then the device is declared
* dead.
*/
*next_loopid = fcport->loop_id;
ha->isp_ops->fabric_logout(vha, fcport->loop_id,
fcport->d_id.b.domain, fcport->d_id.b.area,
fcport->d_id.b.al_pa);
qla2x00_mark_device_lost(vha, fcport, 1, 0);
rval = 1;
break;
} else {
/*
* unrecoverable / not handled error
*/
ql_dbg(ql_dbg_disc, vha, 0x2002,
"Failed=%x port_id=%02x%02x%02x loop_id=%x "
"jiffies=%lx.\n", mb[0], fcport->d_id.b.domain,
fcport->d_id.b.area, fcport->d_id.b.al_pa,
fcport->loop_id, jiffies);
*next_loopid = fcport->loop_id;
ha->isp_ops->fabric_logout(vha, fcport->loop_id,
fcport->d_id.b.domain, fcport->d_id.b.area,
fcport->d_id.b.al_pa);
qla2x00_clear_loop_id(fcport);
fcport->login_retry = 0;
rval = 3;
break;
}
}
return (rval);
}
/*
* qla2x00_local_device_login
* Issue local device login command.
*
* Input:
* ha = adapter block pointer.
* loop_id = loop id of device to login to.
*
* Returns (Where's the #define!!!!):
* 0 - Login successfully
* 1 - Login failed
* 3 - Fatal error
*/
int
qla2x00_local_device_login(scsi_qla_host_t *vha, fc_port_t *fcport)
{
int rval;
uint16_t mb[MAILBOX_REGISTER_COUNT];
memset(mb, 0, sizeof(mb));
rval = qla2x00_login_local_device(vha, fcport, mb, BIT_0);
if (rval == QLA_SUCCESS) {
/* Interrogate mailbox registers for any errors */
if (mb[0] == MBS_COMMAND_ERROR)
rval = 1;
else if (mb[0] == MBS_COMMAND_PARAMETER_ERROR)
/* device not in PCB table */
rval = 3;
}
return (rval);
}
/*
* qla2x00_loop_resync
* Resync with fibre channel devices.
*
* Input:
* ha = adapter block pointer.
*
* Returns:
* 0 = success
*/
int
qla2x00_loop_resync(scsi_qla_host_t *vha)
{
int rval = QLA_SUCCESS;
uint32_t wait_time;
struct req_que *req;
struct rsp_que *rsp;
if (vha->hw->flags.cpu_affinity_enabled)
req = vha->hw->req_q_map[0];
else
req = vha->req;
rsp = req->rsp;
clear_bit(ISP_ABORT_RETRY, &vha->dpc_flags);
if (vha->flags.online) {
if (!(rval = qla2x00_fw_ready(vha))) {
/* Wait at most MAX_TARGET RSCNs for a stable link. */
wait_time = 256;
do {
if (!IS_QLAFX00(vha->hw)) {
/*
* Issue a marker after FW becomes
* ready.
*/
qla2x00_marker(vha, req, rsp, 0, 0,
MK_SYNC_ALL);
vha->marker_needed = 0;
}
/* Remap devices on Loop. */
clear_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
if (IS_QLAFX00(vha->hw))
qlafx00_configure_devices(vha);
else
qla2x00_configure_loop(vha);
wait_time--;
} while (!atomic_read(&vha->loop_down_timer) &&
!(test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags))
&& wait_time && (test_bit(LOOP_RESYNC_NEEDED,
&vha->dpc_flags)));
}
}
if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags))
return (QLA_FUNCTION_FAILED);
if (rval)
ql_dbg(ql_dbg_disc, vha, 0x206c,
"%s *** FAILED ***.\n", __func__);
return (rval);
}
/*
* qla2x00_perform_loop_resync
* Description: This function will set the appropriate flags and call
* qla2x00_loop_resync. If successful loop will be resynced
* Arguments : scsi_qla_host_t pointer
* returm : Success or Failure
*/
int qla2x00_perform_loop_resync(scsi_qla_host_t *ha)
{
int32_t rval = 0;
if (!test_and_set_bit(LOOP_RESYNC_ACTIVE, &ha->dpc_flags)) {
/*Configure the flags so that resync happens properly*/
atomic_set(&ha->loop_down_timer, 0);
if (!(ha->device_flags & DFLG_NO_CABLE)) {
atomic_set(&ha->loop_state, LOOP_UP);
set_bit(LOCAL_LOOP_UPDATE, &ha->dpc_flags);
set_bit(REGISTER_FC4_NEEDED, &ha->dpc_flags);
set_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags);
rval = qla2x00_loop_resync(ha);
} else
atomic_set(&ha->loop_state, LOOP_DEAD);
clear_bit(LOOP_RESYNC_ACTIVE, &ha->dpc_flags);
}
return rval;
}
void
qla2x00_update_fcports(scsi_qla_host_t *base_vha)
{
fc_port_t *fcport;
struct scsi_qla_host *vha;
struct qla_hw_data *ha = base_vha->hw;
unsigned long flags;
spin_lock_irqsave(&ha->vport_slock, flags);
/* Go with deferred removal of rport references. */
list_for_each_entry(vha, &base_vha->hw->vp_list, list) {
atomic_inc(&vha->vref_count);
list_for_each_entry(fcport, &vha->vp_fcports, list) {
if (fcport->drport &&
atomic_read(&fcport->state) != FCS_UNCONFIGURED) {
spin_unlock_irqrestore(&ha->vport_slock, flags);
qla2x00_rport_del(fcport);
/*
* Release the target mode FC NEXUS in
* qla_target.c, if target mod is enabled.
*/
qlt_fc_port_deleted(vha, fcport,
base_vha->total_fcport_update_gen);
spin_lock_irqsave(&ha->vport_slock, flags);
}
}
atomic_dec(&vha->vref_count);
}
spin_unlock_irqrestore(&ha->vport_slock, flags);
}
/* Assumes idc_lock always held on entry */
void
qla83xx_reset_ownership(scsi_qla_host_t *vha)
{
struct qla_hw_data *ha = vha->hw;
uint32_t drv_presence, drv_presence_mask;
uint32_t dev_part_info1, dev_part_info2, class_type;
uint32_t class_type_mask = 0x3;
uint16_t fcoe_other_function = 0xffff, i;
if (IS_QLA8044(ha)) {
drv_presence = qla8044_rd_direct(vha,
QLA8044_CRB_DRV_ACTIVE_INDEX);
dev_part_info1 = qla8044_rd_direct(vha,
QLA8044_CRB_DEV_PART_INFO_INDEX);
dev_part_info2 = qla8044_rd_direct(vha,
QLA8044_CRB_DEV_PART_INFO2);
} else {
qla83xx_rd_reg(vha, QLA83XX_IDC_DRV_PRESENCE, &drv_presence);
qla83xx_rd_reg(vha, QLA83XX_DEV_PARTINFO1, &dev_part_info1);
qla83xx_rd_reg(vha, QLA83XX_DEV_PARTINFO2, &dev_part_info2);
}
for (i = 0; i < 8; i++) {
class_type = ((dev_part_info1 >> (i * 4)) & class_type_mask);
if ((class_type == QLA83XX_CLASS_TYPE_FCOE) &&
(i != ha->portnum)) {
fcoe_other_function = i;
break;
}
}
if (fcoe_other_function == 0xffff) {
for (i = 0; i < 8; i++) {
class_type = ((dev_part_info2 >> (i * 4)) &
class_type_mask);
if ((class_type == QLA83XX_CLASS_TYPE_FCOE) &&
((i + 8) != ha->portnum)) {
fcoe_other_function = i + 8;
break;
}
}
}
/*
* Prepare drv-presence mask based on fcoe functions present.
* However consider only valid physical fcoe function numbers (0-15).
*/
drv_presence_mask = ~((1 << (ha->portnum)) |
((fcoe_other_function == 0xffff) ?
0 : (1 << (fcoe_other_function))));
/* We are the reset owner iff:
* - No other protocol drivers present.
* - This is the lowest among fcoe functions. */
if (!(drv_presence & drv_presence_mask) &&
(ha->portnum < fcoe_other_function)) {
ql_dbg(ql_dbg_p3p, vha, 0xb07f,
"This host is Reset owner.\n");
ha->flags.nic_core_reset_owner = 1;
}
}
static int
__qla83xx_set_drv_ack(scsi_qla_host_t *vha)
{
int rval = QLA_SUCCESS;
struct qla_hw_data *ha = vha->hw;
uint32_t drv_ack;
rval = qla83xx_rd_reg(vha, QLA83XX_IDC_DRIVER_ACK, &drv_ack);
if (rval == QLA_SUCCESS) {
drv_ack |= (1 << ha->portnum);
rval = qla83xx_wr_reg(vha, QLA83XX_IDC_DRIVER_ACK, drv_ack);
}
return rval;
}
static int
__qla83xx_clear_drv_ack(scsi_qla_host_t *vha)
{
int rval = QLA_SUCCESS;
struct qla_hw_data *ha = vha->hw;
uint32_t drv_ack;
rval = qla83xx_rd_reg(vha, QLA83XX_IDC_DRIVER_ACK, &drv_ack);
if (rval == QLA_SUCCESS) {
drv_ack &= ~(1 << ha->portnum);
rval = qla83xx_wr_reg(vha, QLA83XX_IDC_DRIVER_ACK, drv_ack);
}
return rval;
}
static const char *
qla83xx_dev_state_to_string(uint32_t dev_state)
{
switch (dev_state) {
case QLA8XXX_DEV_COLD:
return "COLD/RE-INIT";
case QLA8XXX_DEV_INITIALIZING:
return "INITIALIZING";
case QLA8XXX_DEV_READY:
return "READY";
case QLA8XXX_DEV_NEED_RESET:
return "NEED RESET";
case QLA8XXX_DEV_NEED_QUIESCENT:
return "NEED QUIESCENT";
case QLA8XXX_DEV_FAILED:
return "FAILED";
case QLA8XXX_DEV_QUIESCENT:
return "QUIESCENT";
default:
return "Unknown";
}
}
/* Assumes idc-lock always held on entry */
void
qla83xx_idc_audit(scsi_qla_host_t *vha, int audit_type)
{
struct qla_hw_data *ha = vha->hw;
uint32_t idc_audit_reg = 0, duration_secs = 0;
switch (audit_type) {
case IDC_AUDIT_TIMESTAMP:
ha->idc_audit_ts = (jiffies_to_msecs(jiffies) / 1000);
idc_audit_reg = (ha->portnum) |
(IDC_AUDIT_TIMESTAMP << 7) | (ha->idc_audit_ts << 8);
qla83xx_wr_reg(vha, QLA83XX_IDC_AUDIT, idc_audit_reg);
break;
case IDC_AUDIT_COMPLETION:
duration_secs = ((jiffies_to_msecs(jiffies) -
jiffies_to_msecs(ha->idc_audit_ts)) / 1000);
idc_audit_reg = (ha->portnum) |
(IDC_AUDIT_COMPLETION << 7) | (duration_secs << 8);
qla83xx_wr_reg(vha, QLA83XX_IDC_AUDIT, idc_audit_reg);
break;
default:
ql_log(ql_log_warn, vha, 0xb078,
"Invalid audit type specified.\n");
break;
}
}
/* Assumes idc_lock always held on entry */
static int
qla83xx_initiating_reset(scsi_qla_host_t *vha)
{
struct qla_hw_data *ha = vha->hw;
uint32_t idc_control, dev_state;
__qla83xx_get_idc_control(vha, &idc_control);
if ((idc_control & QLA83XX_IDC_RESET_DISABLED)) {
ql_log(ql_log_info, vha, 0xb080,
"NIC Core reset has been disabled. idc-control=0x%x\n",
idc_control);
return QLA_FUNCTION_FAILED;
}
/* Set NEED-RESET iff in READY state and we are the reset-owner */
qla83xx_rd_reg(vha, QLA83XX_IDC_DEV_STATE, &dev_state);
if (ha->flags.nic_core_reset_owner && dev_state == QLA8XXX_DEV_READY) {
qla83xx_wr_reg(vha, QLA83XX_IDC_DEV_STATE,
QLA8XXX_DEV_NEED_RESET);
ql_log(ql_log_info, vha, 0xb056, "HW State: NEED RESET.\n");
qla83xx_idc_audit(vha, IDC_AUDIT_TIMESTAMP);
} else {
const char *state = qla83xx_dev_state_to_string(dev_state);
ql_log(ql_log_info, vha, 0xb057, "HW State: %s.\n", state);
/* SV: XXX: Is timeout required here? */
/* Wait for IDC state change READY -> NEED_RESET */
while (dev_state == QLA8XXX_DEV_READY) {
qla83xx_idc_unlock(vha, 0);
msleep(200);
qla83xx_idc_lock(vha, 0);
qla83xx_rd_reg(vha, QLA83XX_IDC_DEV_STATE, &dev_state);
}
}
/* Send IDC ack by writing to drv-ack register */
__qla83xx_set_drv_ack(vha);
return QLA_SUCCESS;
}
int
__qla83xx_set_idc_control(scsi_qla_host_t *vha, uint32_t idc_control)
{
return qla83xx_wr_reg(vha, QLA83XX_IDC_CONTROL, idc_control);
}
int
__qla83xx_get_idc_control(scsi_qla_host_t *vha, uint32_t *idc_control)
{
return qla83xx_rd_reg(vha, QLA83XX_IDC_CONTROL, idc_control);
}
static int
qla83xx_check_driver_presence(scsi_qla_host_t *vha)
{
uint32_t drv_presence = 0;
struct qla_hw_data *ha = vha->hw;
qla83xx_rd_reg(vha, QLA83XX_IDC_DRV_PRESENCE, &drv_presence);
if (drv_presence & (1 << ha->portnum))
return QLA_SUCCESS;
else
return QLA_TEST_FAILED;
}
int
qla83xx_nic_core_reset(scsi_qla_host_t *vha)
{
int rval = QLA_SUCCESS;
struct qla_hw_data *ha = vha->hw;
ql_dbg(ql_dbg_p3p, vha, 0xb058,
"Entered %s().\n", __func__);
if (vha->device_flags & DFLG_DEV_FAILED) {
ql_log(ql_log_warn, vha, 0xb059,
"Device in unrecoverable FAILED state.\n");
return QLA_FUNCTION_FAILED;
}
qla83xx_idc_lock(vha, 0);
if (qla83xx_check_driver_presence(vha) != QLA_SUCCESS) {
ql_log(ql_log_warn, vha, 0xb05a,
"Function=0x%x has been removed from IDC participation.\n",
ha->portnum);
rval = QLA_FUNCTION_FAILED;
goto exit;
}
qla83xx_reset_ownership(vha);
rval = qla83xx_initiating_reset(vha);
/*
* Perform reset if we are the reset-owner,
* else wait till IDC state changes to READY/FAILED.
*/
if (rval == QLA_SUCCESS) {
rval = qla83xx_idc_state_handler(vha);
if (rval == QLA_SUCCESS)
ha->flags.nic_core_hung = 0;
__qla83xx_clear_drv_ack(vha);
}
exit:
qla83xx_idc_unlock(vha, 0);
ql_dbg(ql_dbg_p3p, vha, 0xb05b, "Exiting %s.\n", __func__);
return rval;
}
int
qla2xxx_mctp_dump(scsi_qla_host_t *vha)
{
struct qla_hw_data *ha = vha->hw;
int rval = QLA_FUNCTION_FAILED;
if (!IS_MCTP_CAPABLE(ha)) {
/* This message can be removed from the final version */
ql_log(ql_log_info, vha, 0x506d,
"This board is not MCTP capable\n");
return rval;
}
if (!ha->mctp_dump) {
ha->mctp_dump = dma_alloc_coherent(&ha->pdev->dev,
MCTP_DUMP_SIZE, &ha->mctp_dump_dma, GFP_KERNEL);
if (!ha->mctp_dump) {
ql_log(ql_log_warn, vha, 0x506e,
"Failed to allocate memory for mctp dump\n");
return rval;
}
}
#define MCTP_DUMP_STR_ADDR 0x00000000
rval = qla2x00_dump_mctp_data(vha, ha->mctp_dump_dma,
MCTP_DUMP_STR_ADDR, MCTP_DUMP_SIZE/4);
if (rval != QLA_SUCCESS) {
ql_log(ql_log_warn, vha, 0x506f,
"Failed to capture mctp dump\n");
} else {
ql_log(ql_log_info, vha, 0x5070,
"Mctp dump capture for host (%ld/%p).\n",
vha->host_no, ha->mctp_dump);
ha->mctp_dumped = 1;
}
if (!ha->flags.nic_core_reset_hdlr_active && !ha->portnum) {
ha->flags.nic_core_reset_hdlr_active = 1;
rval = qla83xx_restart_nic_firmware(vha);
if (rval)
/* NIC Core reset failed. */
ql_log(ql_log_warn, vha, 0x5071,
"Failed to restart nic firmware\n");
else
ql_dbg(ql_dbg_p3p, vha, 0xb084,
"Restarted NIC firmware successfully.\n");
ha->flags.nic_core_reset_hdlr_active = 0;
}
return rval;
}
/*
* qla2x00_quiesce_io
* Description: This function will block the new I/Os
* Its not aborting any I/Os as context
* is not destroyed during quiescence
* Arguments: scsi_qla_host_t
* return : void
*/
void
qla2x00_quiesce_io(scsi_qla_host_t *vha)
{
struct qla_hw_data *ha = vha->hw;
struct scsi_qla_host *vp;
ql_dbg(ql_dbg_dpc, vha, 0x401d,
"Quiescing I/O - ha=%p.\n", ha);
atomic_set(&ha->loop_down_timer, LOOP_DOWN_TIME);
if (atomic_read(&vha->loop_state) != LOOP_DOWN) {
atomic_set(&vha->loop_state, LOOP_DOWN);
qla2x00_mark_all_devices_lost(vha, 0);
list_for_each_entry(vp, &ha->vp_list, list)
qla2x00_mark_all_devices_lost(vp, 0);
} else {
if (!atomic_read(&vha->loop_down_timer))
atomic_set(&vha->loop_down_timer,
LOOP_DOWN_TIME);
}
/* Wait for pending cmds to complete */
qla2x00_eh_wait_for_pending_commands(vha, 0, 0, WAIT_HOST);
}
void
qla2x00_abort_isp_cleanup(scsi_qla_host_t *vha)
{
struct qla_hw_data *ha = vha->hw;
struct scsi_qla_host *vp;
unsigned long flags;
fc_port_t *fcport;
/* For ISP82XX, driver waits for completion of the commands.
* online flag should be set.
*/
if (!(IS_P3P_TYPE(ha)))
vha->flags.online = 0;
ha->flags.chip_reset_done = 0;
clear_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
vha->qla_stats.total_isp_aborts++;
ql_log(ql_log_info, vha, 0x00af,
"Performing ISP error recovery - ha=%p.\n", ha);
/* For ISP82XX, reset_chip is just disabling interrupts.
* Driver waits for the completion of the commands.
* the interrupts need to be enabled.
*/
if (!(IS_P3P_TYPE(ha)))
ha->isp_ops->reset_chip(vha);
atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME);
if (atomic_read(&vha->loop_state) != LOOP_DOWN) {
atomic_set(&vha->loop_state, LOOP_DOWN);
qla2x00_mark_all_devices_lost(vha, 0);
spin_lock_irqsave(&ha->vport_slock, flags);
list_for_each_entry(vp, &ha->vp_list, list) {
atomic_inc(&vp->vref_count);
spin_unlock_irqrestore(&ha->vport_slock, flags);
qla2x00_mark_all_devices_lost(vp, 0);
spin_lock_irqsave(&ha->vport_slock, flags);
atomic_dec(&vp->vref_count);
}
spin_unlock_irqrestore(&ha->vport_slock, flags);
} else {
if (!atomic_read(&vha->loop_down_timer))
atomic_set(&vha->loop_down_timer,
LOOP_DOWN_TIME);
}
/* Clear all async request states across all VPs. */
list_for_each_entry(fcport, &vha->vp_fcports, list)
fcport->flags &= ~(FCF_LOGIN_NEEDED | FCF_ASYNC_SENT);
spin_lock_irqsave(&ha->vport_slock, flags);
list_for_each_entry(vp, &ha->vp_list, list) {
atomic_inc(&vp->vref_count);
spin_unlock_irqrestore(&ha->vport_slock, flags);
list_for_each_entry(fcport, &vp->vp_fcports, list)
fcport->flags &= ~(FCF_LOGIN_NEEDED | FCF_ASYNC_SENT);
spin_lock_irqsave(&ha->vport_slock, flags);
atomic_dec(&vp->vref_count);
}
spin_unlock_irqrestore(&ha->vport_slock, flags);
if (!ha->flags.eeh_busy) {
/* Make sure for ISP 82XX IO DMA is complete */
if (IS_P3P_TYPE(ha)) {
qla82xx_chip_reset_cleanup(vha);
ql_log(ql_log_info, vha, 0x00b4,
"Done chip reset cleanup.\n");
/* Done waiting for pending commands.
* Reset the online flag.
*/
vha->flags.online = 0;
}
/* Requeue all commands in outstanding command list. */
qla2x00_abort_all_cmds(vha, DID_RESET << 16);
}
ha->chip_reset++;
/* memory barrier */
wmb();
}
/*
* qla2x00_abort_isp
* Resets ISP and aborts all outstanding commands.
*
* Input:
* ha = adapter block pointer.
*
* Returns:
* 0 = success
*/
int
qla2x00_abort_isp(scsi_qla_host_t *vha)
{
int rval;
uint8_t status = 0;
struct qla_hw_data *ha = vha->hw;
struct scsi_qla_host *vp;
struct req_que *req = ha->req_q_map[0];
unsigned long flags;
if (vha->flags.online) {
qla2x00_abort_isp_cleanup(vha);
if (IS_QLA8031(ha)) {
ql_dbg(ql_dbg_p3p, vha, 0xb05c,
"Clearing fcoe driver presence.\n");
if (qla83xx_clear_drv_presence(vha) != QLA_SUCCESS)
ql_dbg(ql_dbg_p3p, vha, 0xb073,
"Error while clearing DRV-Presence.\n");
}
if (unlikely(pci_channel_offline(ha->pdev) &&
ha->flags.pci_channel_io_perm_failure)) {
clear_bit(ISP_ABORT_RETRY, &vha->dpc_flags);
status = 0;
return status;
}
ha->isp_ops->get_flash_version(vha, req->ring);
ha->isp_ops->nvram_config(vha);
if (!qla2x00_restart_isp(vha)) {
clear_bit(RESET_MARKER_NEEDED, &vha->dpc_flags);
if (!atomic_read(&vha->loop_down_timer)) {
/*
* Issue marker command only when we are going
* to start the I/O .
*/
vha->marker_needed = 1;
}
vha->flags.online = 1;
ha->isp_ops->enable_intrs(ha);
ha->isp_abort_cnt = 0;
clear_bit(ISP_ABORT_RETRY, &vha->dpc_flags);
if (IS_QLA81XX(ha) || IS_QLA8031(ha))
qla2x00_get_fw_version(vha);
if (ha->fce) {
ha->flags.fce_enabled = 1;
memset(ha->fce, 0,
fce_calc_size(ha->fce_bufs));
rval = qla2x00_enable_fce_trace(vha,
ha->fce_dma, ha->fce_bufs, ha->fce_mb,
&ha->fce_bufs);
if (rval) {
ql_log(ql_log_warn, vha, 0x8033,
"Unable to reinitialize FCE "
"(%d).\n", rval);
ha->flags.fce_enabled = 0;
}
}
if (ha->eft) {
memset(ha->eft, 0, EFT_SIZE);
rval = qla2x00_enable_eft_trace(vha,
ha->eft_dma, EFT_NUM_BUFFERS);
if (rval) {
ql_log(ql_log_warn, vha, 0x8034,
"Unable to reinitialize EFT "
"(%d).\n", rval);
}
}
} else { /* failed the ISP abort */
vha->flags.online = 1;
if (test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
if (ha->isp_abort_cnt == 0) {
ql_log(ql_log_fatal, vha, 0x8035,
"ISP error recover failed - "
"board disabled.\n");
/*
* The next call disables the board
* completely.
*/
ha->isp_ops->reset_adapter(vha);
vha->flags.online = 0;
clear_bit(ISP_ABORT_RETRY,
&vha->dpc_flags);
status = 0;
} else { /* schedule another ISP abort */
ha->isp_abort_cnt--;
ql_dbg(ql_dbg_taskm, vha, 0x8020,
"ISP abort - retry remaining %d.\n",
ha->isp_abort_cnt);
status = 1;
}
} else {
ha->isp_abort_cnt = MAX_RETRIES_OF_ISP_ABORT;
ql_dbg(ql_dbg_taskm, vha, 0x8021,
"ISP error recovery - retrying (%d) "
"more times.\n", ha->isp_abort_cnt);
set_bit(ISP_ABORT_RETRY, &vha->dpc_flags);
status = 1;
}
}
}
if (!status) {
ql_dbg(ql_dbg_taskm, vha, 0x8022, "%s succeeded.\n", __func__);
spin_lock_irqsave(&ha->vport_slock, flags);
list_for_each_entry(vp, &ha->vp_list, list) {
if (vp->vp_idx) {
atomic_inc(&vp->vref_count);
spin_unlock_irqrestore(&ha->vport_slock, flags);
qla2x00_vp_abort_isp(vp);
spin_lock_irqsave(&ha->vport_slock, flags);
atomic_dec(&vp->vref_count);
}
}
spin_unlock_irqrestore(&ha->vport_slock, flags);
if (IS_QLA8031(ha)) {
ql_dbg(ql_dbg_p3p, vha, 0xb05d,
"Setting back fcoe driver presence.\n");
if (qla83xx_set_drv_presence(vha) != QLA_SUCCESS)
ql_dbg(ql_dbg_p3p, vha, 0xb074,
"Error while setting DRV-Presence.\n");
}
} else {
ql_log(ql_log_warn, vha, 0x8023, "%s **** FAILED ****.\n",
__func__);
}
return(status);
}
/*
* qla2x00_restart_isp
* restarts the ISP after a reset
*
* Input:
* ha = adapter block pointer.
*
* Returns:
* 0 = success
*/
static int
qla2x00_restart_isp(scsi_qla_host_t *vha)
{
int status = 0;
struct qla_hw_data *ha = vha->hw;
struct req_que *req = ha->req_q_map[0];
struct rsp_que *rsp = ha->rsp_q_map[0];
/* If firmware needs to be loaded */
if (qla2x00_isp_firmware(vha)) {
vha->flags.online = 0;
status = ha->isp_ops->chip_diag(vha);
if (!status)
status = qla2x00_setup_chip(vha);
}
if (!status && !(status = qla2x00_init_rings(vha))) {
clear_bit(RESET_MARKER_NEEDED, &vha->dpc_flags);
ha->flags.chip_reset_done = 1;
/* Initialize the queues in use */
qla25xx_init_queues(ha);
status = qla2x00_fw_ready(vha);
if (!status) {
/* Issue a marker after FW becomes ready. */
qla2x00_marker(vha, req, rsp, 0, 0, MK_SYNC_ALL);
set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
}
/* if no cable then assume it's good */
if ((vha->device_flags & DFLG_NO_CABLE))
status = 0;
}
return (status);
}
static int
qla25xx_init_queues(struct qla_hw_data *ha)
{
struct rsp_que *rsp = NULL;
struct req_que *req = NULL;
struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev);
int ret = -1;
int i;
for (i = 1; i < ha->max_rsp_queues; i++) {
rsp = ha->rsp_q_map[i];
if (rsp && test_bit(i, ha->rsp_qid_map)) {
rsp->options &= ~BIT_0;
ret = qla25xx_init_rsp_que(base_vha, rsp);
if (ret != QLA_SUCCESS)
ql_dbg(ql_dbg_init, base_vha, 0x00ff,
"%s Rsp que: %d init failed.\n",
__func__, rsp->id);
else
ql_dbg(ql_dbg_init, base_vha, 0x0100,
"%s Rsp que: %d inited.\n",
__func__, rsp->id);
}
}
for (i = 1; i < ha->max_req_queues; i++) {
req = ha->req_q_map[i];
if (req && test_bit(i, ha->req_qid_map)) {
/* Clear outstanding commands array. */
req->options &= ~BIT_0;
ret = qla25xx_init_req_que(base_vha, req);
if (ret != QLA_SUCCESS)
ql_dbg(ql_dbg_init, base_vha, 0x0101,
"%s Req que: %d init failed.\n",
__func__, req->id);
else
ql_dbg(ql_dbg_init, base_vha, 0x0102,
"%s Req que: %d inited.\n",
__func__, req->id);
}
}
return ret;
}
/*
* qla2x00_reset_adapter
* Reset adapter.
*
* Input:
* ha = adapter block pointer.
*/
void
qla2x00_reset_adapter(scsi_qla_host_t *vha)
{
unsigned long flags = 0;
struct qla_hw_data *ha = vha->hw;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
vha->flags.online = 0;
ha->isp_ops->disable_intrs(ha);
spin_lock_irqsave(&ha->hardware_lock, flags);
WRT_REG_WORD(&reg->hccr, HCCR_RESET_RISC);
RD_REG_WORD(&reg->hccr); /* PCI Posting. */
WRT_REG_WORD(&reg->hccr, HCCR_RELEASE_RISC);
RD_REG_WORD(&reg->hccr); /* PCI Posting. */
spin_unlock_irqrestore(&ha->hardware_lock, flags);
}
void
qla24xx_reset_adapter(scsi_qla_host_t *vha)
{
unsigned long flags = 0;
struct qla_hw_data *ha = vha->hw;
struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
if (IS_P3P_TYPE(ha))
return;
vha->flags.online = 0;
ha->isp_ops->disable_intrs(ha);
spin_lock_irqsave(&ha->hardware_lock, flags);
WRT_REG_DWORD(&reg->hccr, HCCRX_SET_RISC_RESET);
RD_REG_DWORD(&reg->hccr);
WRT_REG_DWORD(&reg->hccr, HCCRX_REL_RISC_PAUSE);
RD_REG_DWORD(&reg->hccr);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
if (IS_NOPOLLING_TYPE(ha))
ha->isp_ops->enable_intrs(ha);
}
/* On sparc systems, obtain port and node WWN from firmware
* properties.
*/
static void qla24xx_nvram_wwn_from_ofw(scsi_qla_host_t *vha,
struct nvram_24xx *nv)
{
#ifdef CONFIG_SPARC
struct qla_hw_data *ha = vha->hw;
struct pci_dev *pdev = ha->pdev;
struct device_node *dp = pci_device_to_OF_node(pdev);
const u8 *val;
int len;
val = of_get_property(dp, "port-wwn", &len);
if (val && len >= WWN_SIZE)
memcpy(nv->port_name, val, WWN_SIZE);
val = of_get_property(dp, "node-wwn", &len);
if (val && len >= WWN_SIZE)
memcpy(nv->node_name, val, WWN_SIZE);
#endif
}
int
qla24xx_nvram_config(scsi_qla_host_t *vha)
{
int rval;
struct init_cb_24xx *icb;
struct nvram_24xx *nv;
uint32_t *dptr;
uint8_t *dptr1, *dptr2;
uint32_t chksum;
uint16_t cnt;
struct qla_hw_data *ha = vha->hw;
rval = QLA_SUCCESS;
icb = (struct init_cb_24xx *)ha->init_cb;
nv = ha->nvram;
/* Determine NVRAM starting address. */
if (ha->port_no == 0) {
ha->nvram_base = FA_NVRAM_FUNC0_ADDR;
ha->vpd_base = FA_NVRAM_VPD0_ADDR;
} else {
ha->nvram_base = FA_NVRAM_FUNC1_ADDR;
ha->vpd_base = FA_NVRAM_VPD1_ADDR;
}
ha->nvram_size = sizeof(struct nvram_24xx);
ha->vpd_size = FA_NVRAM_VPD_SIZE;
/* Get VPD data into cache */
ha->vpd = ha->nvram + VPD_OFFSET;
ha->isp_ops->read_nvram(vha, (uint8_t *)ha->vpd,
ha->nvram_base - FA_NVRAM_FUNC0_ADDR, FA_NVRAM_VPD_SIZE * 4);
/* Get NVRAM data into cache and calculate checksum. */
dptr = (uint32_t *)nv;
ha->isp_ops->read_nvram(vha, (uint8_t *)dptr, ha->nvram_base,
ha->nvram_size);
for (cnt = 0, chksum = 0; cnt < ha->nvram_size >> 2; cnt++, dptr++)
chksum += le32_to_cpu(*dptr);
ql_dbg(ql_dbg_init + ql_dbg_buffer, vha, 0x006a,
"Contents of NVRAM\n");
ql_dump_buffer(ql_dbg_init + ql_dbg_buffer, vha, 0x010d,
(uint8_t *)nv, ha->nvram_size);
/* Bad NVRAM data, set defaults parameters. */
if (chksum || nv->id[0] != 'I' || nv->id[1] != 'S' || nv->id[2] != 'P'
|| nv->id[3] != ' ' ||
nv->nvram_version < cpu_to_le16(ICB_VERSION)) {
/* Reset NVRAM data. */
ql_log(ql_log_warn, vha, 0x006b,
"Inconsistent NVRAM detected: checksum=0x%x id=%c "
"version=0x%x.\n", chksum, nv->id[0], nv->nvram_version);
ql_log(ql_log_warn, vha, 0x006c,
"Falling back to functioning (yet invalid -- WWPN) "
"defaults.\n");
/*
* Set default initialization control block.
*/
memset(nv, 0, ha->nvram_size);
nv->nvram_version = cpu_to_le16(ICB_VERSION);
nv->version = cpu_to_le16(ICB_VERSION);
nv->frame_payload_size = 2048;
nv->execution_throttle = cpu_to_le16(0xFFFF);
nv->exchange_count = cpu_to_le16(0);
nv->hard_address = cpu_to_le16(124);
nv->port_name[0] = 0x21;
nv->port_name[1] = 0x00 + ha->port_no + 1;
nv->port_name[2] = 0x00;
nv->port_name[3] = 0xe0;
nv->port_name[4] = 0x8b;
nv->port_name[5] = 0x1c;
nv->port_name[6] = 0x55;
nv->port_name[7] = 0x86;
nv->node_name[0] = 0x20;
nv->node_name[1] = 0x00;
nv->node_name[2] = 0x00;
nv->node_name[3] = 0xe0;
nv->node_name[4] = 0x8b;
nv->node_name[5] = 0x1c;
nv->node_name[6] = 0x55;
nv->node_name[7] = 0x86;
qla24xx_nvram_wwn_from_ofw(vha, nv);
nv->login_retry_count = cpu_to_le16(8);
nv->interrupt_delay_timer = cpu_to_le16(0);
nv->login_timeout = cpu_to_le16(0);
nv->firmware_options_1 =
cpu_to_le32(BIT_14|BIT_13|BIT_2|BIT_1);
nv->firmware_options_2 = cpu_to_le32(2 << 4);
nv->firmware_options_2 |= cpu_to_le32(BIT_12);
nv->firmware_options_3 = cpu_to_le32(2 << 13);
nv->host_p = cpu_to_le32(BIT_11|BIT_10);
nv->efi_parameters = cpu_to_le32(0);
nv->reset_delay = 5;
nv->max_luns_per_target = cpu_to_le16(128);
nv->port_down_retry_count = cpu_to_le16(30);
nv->link_down_timeout = cpu_to_le16(30);
rval = 1;
}
if (!qla_ini_mode_enabled(vha)) {
/* Don't enable full login after initial LIP */
nv->firmware_options_1 &= cpu_to_le32(~BIT_13);
/* Don't enable LIP full login for initiator */
nv->host_p &= cpu_to_le32(~BIT_10);
}
qlt_24xx_config_nvram_stage1(vha, nv);
/* Reset Initialization control block */
memset(icb, 0, ha->init_cb_size);
/* Copy 1st segment. */
dptr1 = (uint8_t *)icb;
dptr2 = (uint8_t *)&nv->version;
cnt = (uint8_t *)&icb->response_q_inpointer - (uint8_t *)&icb->version;
while (cnt--)
*dptr1++ = *dptr2++;
icb->login_retry_count = nv->login_retry_count;
icb->link_down_on_nos = nv->link_down_on_nos;
/* Copy 2nd segment. */
dptr1 = (uint8_t *)&icb->interrupt_delay_timer;
dptr2 = (uint8_t *)&nv->interrupt_delay_timer;
cnt = (uint8_t *)&icb->reserved_3 -
(uint8_t *)&icb->interrupt_delay_timer;
while (cnt--)
*dptr1++ = *dptr2++;
/*
* Setup driver NVRAM options.
*/
qla2x00_set_model_info(vha, nv->model_name, sizeof(nv->model_name),
"QLA2462");
qlt_24xx_config_nvram_stage2(vha, icb);
if (nv->host_p & cpu_to_le32(BIT_15)) {
/* Use alternate WWN? */
memcpy(icb->node_name, nv->alternate_node_name, WWN_SIZE);
memcpy(icb->port_name, nv->alternate_port_name, WWN_SIZE);
}
/* Prepare nodename */
if ((icb->firmware_options_1 & cpu_to_le32(BIT_14)) == 0) {
/*
* Firmware will apply the following mask if the nodename was
* not provided.
*/
memcpy(icb->node_name, icb->port_name, WWN_SIZE);
icb->node_name[0] &= 0xF0;
}
/* Set host adapter parameters. */
ha->flags.disable_risc_code_load = 0;
ha->flags.enable_lip_reset = 0;
ha->flags.enable_lip_full_login =
le32_to_cpu(nv->host_p) & BIT_10 ? 1: 0;
ha->flags.enable_target_reset =
le32_to_cpu(nv->host_p) & BIT_11 ? 1: 0;
ha->flags.enable_led_scheme = 0;
ha->flags.disable_serdes = le32_to_cpu(nv->host_p) & BIT_5 ? 1: 0;
ha->operating_mode = (le32_to_cpu(icb->firmware_options_2) &
(BIT_6 | BIT_5 | BIT_4)) >> 4;
memcpy(ha->fw_seriallink_options24, nv->seriallink_options,
sizeof(ha->fw_seriallink_options24));
/* save HBA serial number */
ha->serial0 = icb->port_name[5];
ha->serial1 = icb->port_name[6];
ha->serial2 = icb->port_name[7];
memcpy(vha->node_name, icb->node_name, WWN_SIZE);
memcpy(vha->port_name, icb->port_name, WWN_SIZE);
icb->execution_throttle = cpu_to_le16(0xFFFF);
ha->retry_count = le16_to_cpu(nv->login_retry_count);
/* Set minimum login_timeout to 4 seconds. */
if (le16_to_cpu(nv->login_timeout) < ql2xlogintimeout)
nv->login_timeout = cpu_to_le16(ql2xlogintimeout);
if (le16_to_cpu(nv->login_timeout) < 4)
nv->login_timeout = cpu_to_le16(4);
ha->login_timeout = le16_to_cpu(nv->login_timeout);
/* Set minimum RATOV to 100 tenths of a second. */
ha->r_a_tov = 100;
ha->loop_reset_delay = nv->reset_delay;
/* Link Down Timeout = 0:
*
* When Port Down timer expires we will start returning
* I/O's to OS with "DID_NO_CONNECT".
*
* Link Down Timeout != 0:
*
* The driver waits for the link to come up after link down
* before returning I/Os to OS with "DID_NO_CONNECT".
*/
if (le16_to_cpu(nv->link_down_timeout) == 0) {
ha->loop_down_abort_time =
(LOOP_DOWN_TIME - LOOP_DOWN_TIMEOUT);
} else {
ha->link_down_timeout = le16_to_cpu(nv->link_down_timeout);
ha->loop_down_abort_time =
(LOOP_DOWN_TIME - ha->link_down_timeout);
}
/* Need enough time to try and get the port back. */
ha->port_down_retry_count = le16_to_cpu(nv->port_down_retry_count);
if (qlport_down_retry)
ha->port_down_retry_count = qlport_down_retry;
/* Set login_retry_count */
ha->login_retry_count = le16_to_cpu(nv->login_retry_count);
if (ha->port_down_retry_count ==
le16_to_cpu(nv->port_down_retry_count) &&
ha->port_down_retry_count > 3)
ha->login_retry_count = ha->port_down_retry_count;
else if (ha->port_down_retry_count > (int)ha->login_retry_count)
ha->login_retry_count = ha->port_down_retry_count;
if (ql2xloginretrycount)
ha->login_retry_count = ql2xloginretrycount;
/* Enable ZIO. */
if (!vha->flags.init_done) {
ha->zio_mode = le32_to_cpu(icb->firmware_options_2) &
(BIT_3 | BIT_2 | BIT_1 | BIT_0);
ha->zio_timer = le16_to_cpu(icb->interrupt_delay_timer) ?
le16_to_cpu(icb->interrupt_delay_timer): 2;
}
icb->firmware_options_2 &= cpu_to_le32(
~(BIT_3 | BIT_2 | BIT_1 | BIT_0));
vha->flags.process_response_queue = 0;
if (ha->zio_mode != QLA_ZIO_DISABLED) {
ha->zio_mode = QLA_ZIO_MODE_6;
ql_log(ql_log_info, vha, 0x006f,
"ZIO mode %d enabled; timer delay (%d us).\n",
ha->zio_mode, ha->zio_timer * 100);
icb->firmware_options_2 |= cpu_to_le32(
(uint32_t)ha->zio_mode);
icb->interrupt_delay_timer = cpu_to_le16(ha->zio_timer);
vha->flags.process_response_queue = 1;
}
if (rval) {
ql_log(ql_log_warn, vha, 0x0070,
"NVRAM configuration failed.\n");
}
return (rval);
}
uint8_t qla27xx_find_valid_image(struct scsi_qla_host *vha)
{
struct qla27xx_image_status pri_image_status, sec_image_status;
uint8_t valid_pri_image, valid_sec_image;
uint32_t *wptr;
uint32_t cnt, chksum, size;
struct qla_hw_data *ha = vha->hw;
valid_pri_image = valid_sec_image = 1;
ha->active_image = 0;
size = sizeof(struct qla27xx_image_status) / sizeof(uint32_t);
if (!ha->flt_region_img_status_pri) {
valid_pri_image = 0;
goto check_sec_image;
}
qla24xx_read_flash_data(vha, (uint32_t *)(&pri_image_status),
ha->flt_region_img_status_pri, size);
if (pri_image_status.signature != QLA27XX_IMG_STATUS_SIGN) {
ql_dbg(ql_dbg_init, vha, 0x018b,
"Primary image signature (0x%x) not valid\n",
pri_image_status.signature);
valid_pri_image = 0;
goto check_sec_image;
}
wptr = (uint32_t *)(&pri_image_status);
cnt = size;
for (chksum = 0; cnt--; wptr++)
chksum += le32_to_cpu(*wptr);
if (chksum) {
ql_dbg(ql_dbg_init, vha, 0x018c,
"Checksum validation failed for primary image (0x%x)\n",
chksum);
valid_pri_image = 0;
}
check_sec_image:
if (!ha->flt_region_img_status_sec) {
valid_sec_image = 0;
goto check_valid_image;
}
qla24xx_read_flash_data(vha, (uint32_t *)(&sec_image_status),
ha->flt_region_img_status_sec, size);
if (sec_image_status.signature != QLA27XX_IMG_STATUS_SIGN) {
ql_dbg(ql_dbg_init, vha, 0x018d,
"Secondary image signature(0x%x) not valid\n",
sec_image_status.signature);
valid_sec_image = 0;
goto check_valid_image;
}
wptr = (uint32_t *)(&sec_image_status);
cnt = size;
for (chksum = 0; cnt--; wptr++)
chksum += le32_to_cpu(*wptr);
if (chksum) {
ql_dbg(ql_dbg_init, vha, 0x018e,
"Checksum validation failed for secondary image (0x%x)\n",
chksum);
valid_sec_image = 0;
}
check_valid_image:
if (valid_pri_image && (pri_image_status.image_status_mask & 0x1))
ha->active_image = QLA27XX_PRIMARY_IMAGE;
if (valid_sec_image && (sec_image_status.image_status_mask & 0x1)) {
if (!ha->active_image ||
pri_image_status.generation_number <
sec_image_status.generation_number)
ha->active_image = QLA27XX_SECONDARY_IMAGE;
}
ql_dbg(ql_dbg_init, vha, 0x018f, "%s image\n",
ha->active_image == 0 ? "default bootld and fw" :
ha->active_image == 1 ? "primary" :
ha->active_image == 2 ? "secondary" :
"Invalid");
return ha->active_image;
}
static int
qla24xx_load_risc_flash(scsi_qla_host_t *vha, uint32_t *srisc_addr,
uint32_t faddr)
{
int rval = QLA_SUCCESS;
int segments, fragment;
uint32_t *dcode, dlen;
uint32_t risc_addr;
uint32_t risc_size;
uint32_t i;
struct qla_hw_data *ha = vha->hw;
struct req_que *req = ha->req_q_map[0];
ql_dbg(ql_dbg_init, vha, 0x008b,
"FW: Loading firmware from flash (%x).\n", faddr);
rval = QLA_SUCCESS;
segments = FA_RISC_CODE_SEGMENTS;
dcode = (uint32_t *)req->ring;
*srisc_addr = 0;
if (IS_QLA27XX(ha) &&
qla27xx_find_valid_image(vha) == QLA27XX_SECONDARY_IMAGE)
faddr = ha->flt_region_fw_sec;
/* Validate firmware image by checking version. */
qla24xx_read_flash_data(vha, dcode, faddr + 4, 4);
for (i = 0; i < 4; i++)
dcode[i] = be32_to_cpu(dcode[i]);
if ((dcode[0] == 0xffffffff && dcode[1] == 0xffffffff &&
dcode[2] == 0xffffffff && dcode[3] == 0xffffffff) ||
(dcode[0] == 0 && dcode[1] == 0 && dcode[2] == 0 &&
dcode[3] == 0)) {
ql_log(ql_log_fatal, vha, 0x008c,
"Unable to verify the integrity of flash firmware "
"image.\n");
ql_log(ql_log_fatal, vha, 0x008d,
"Firmware data: %08x %08x %08x %08x.\n",
dcode[0], dcode[1], dcode[2], dcode[3]);
return QLA_FUNCTION_FAILED;
}
while (segments && rval == QLA_SUCCESS) {
/* Read segment's load information. */
qla24xx_read_flash_data(vha, dcode, faddr, 4);
risc_addr = be32_to_cpu(dcode[2]);
*srisc_addr = *srisc_addr == 0 ? risc_addr : *srisc_addr;
risc_size = be32_to_cpu(dcode[3]);
fragment = 0;
while (risc_size > 0 && rval == QLA_SUCCESS) {
dlen = (uint32_t)(ha->fw_transfer_size >> 2);
if (dlen > risc_size)
dlen = risc_size;
ql_dbg(ql_dbg_init, vha, 0x008e,
"Loading risc segment@ risc addr %x "
"number of dwords 0x%x offset 0x%x.\n",
risc_addr, dlen, faddr);
qla24xx_read_flash_data(vha, dcode, faddr, dlen);
for (i = 0; i < dlen; i++)
dcode[i] = swab32(dcode[i]);
rval = qla2x00_load_ram(vha, req->dma, risc_addr,
dlen);
if (rval) {
ql_log(ql_log_fatal, vha, 0x008f,
"Failed to load segment %d of firmware.\n",
fragment);
return QLA_FUNCTION_FAILED;
}
faddr += dlen;
risc_addr += dlen;
risc_size -= dlen;
fragment++;
}
/* Next segment. */
segments--;
}
if (!IS_QLA27XX(ha))
return rval;
if (ha->fw_dump_template)
vfree(ha->fw_dump_template);
ha->fw_dump_template = NULL;
ha->fw_dump_template_len = 0;
ql_dbg(ql_dbg_init, vha, 0x0161,
"Loading fwdump template from %x\n", faddr);
qla24xx_read_flash_data(vha, dcode, faddr, 7);
risc_size = be32_to_cpu(dcode[2]);
ql_dbg(ql_dbg_init, vha, 0x0162,
"-> array size %x dwords\n", risc_size);
if (risc_size == 0 || risc_size == ~0)
goto default_template;
dlen = (risc_size - 8) * sizeof(*dcode);
ql_dbg(ql_dbg_init, vha, 0x0163,
"-> template allocating %x bytes...\n", dlen);
ha->fw_dump_template = vmalloc(dlen);
if (!ha->fw_dump_template) {
ql_log(ql_log_warn, vha, 0x0164,
"Failed fwdump template allocate %x bytes.\n", risc_size);
goto default_template;
}
faddr += 7;
risc_size -= 8;
dcode = ha->fw_dump_template;
qla24xx_read_flash_data(vha, dcode, faddr, risc_size);
for (i = 0; i < risc_size; i++)
dcode[i] = le32_to_cpu(dcode[i]);
if (!qla27xx_fwdt_template_valid(dcode)) {
ql_log(ql_log_warn, vha, 0x0165,
"Failed fwdump template validate\n");
goto default_template;
}
dlen = qla27xx_fwdt_template_size(dcode);
ql_dbg(ql_dbg_init, vha, 0x0166,
"-> template size %x bytes\n", dlen);
if (dlen > risc_size * sizeof(*dcode)) {
ql_log(ql_log_warn, vha, 0x0167,
"Failed fwdump template exceeds array by %x bytes\n",
(uint32_t)(dlen - risc_size * sizeof(*dcode)));
goto default_template;
}
ha->fw_dump_template_len = dlen;
return rval;
default_template:
ql_log(ql_log_warn, vha, 0x0168, "Using default fwdump template\n");
if (ha->fw_dump_template)
vfree(ha->fw_dump_template);
ha->fw_dump_template = NULL;
ha->fw_dump_template_len = 0;
dlen = qla27xx_fwdt_template_default_size();
ql_dbg(ql_dbg_init, vha, 0x0169,
"-> template allocating %x bytes...\n", dlen);
ha->fw_dump_template = vmalloc(dlen);
if (!ha->fw_dump_template) {
ql_log(ql_log_warn, vha, 0x016a,
"Failed fwdump template allocate %x bytes.\n", risc_size);
goto failed_template;
}
dcode = ha->fw_dump_template;
risc_size = dlen / sizeof(*dcode);
memcpy(dcode, qla27xx_fwdt_template_default(), dlen);
for (i = 0; i < risc_size; i++)
dcode[i] = be32_to_cpu(dcode[i]);
if (!qla27xx_fwdt_template_valid(ha->fw_dump_template)) {
ql_log(ql_log_warn, vha, 0x016b,
"Failed fwdump template validate\n");
goto failed_template;
}
dlen = qla27xx_fwdt_template_size(ha->fw_dump_template);
ql_dbg(ql_dbg_init, vha, 0x016c,
"-> template size %x bytes\n", dlen);
ha->fw_dump_template_len = dlen;
return rval;
failed_template:
ql_log(ql_log_warn, vha, 0x016d, "Failed default fwdump template\n");
if (ha->fw_dump_template)
vfree(ha->fw_dump_template);
ha->fw_dump_template = NULL;
ha->fw_dump_template_len = 0;
return rval;
}
#define QLA_FW_URL "http://ldriver.qlogic.com/firmware/"
int
qla2x00_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr)
{
int rval;
int i, fragment;
uint16_t *wcode, *fwcode;
uint32_t risc_addr, risc_size, fwclen, wlen, *seg;
struct fw_blob *blob;
struct qla_hw_data *ha = vha->hw;
struct req_que *req = ha->req_q_map[0];
/* Load firmware blob. */
blob = qla2x00_request_firmware(vha);
if (!blob) {
ql_log(ql_log_info, vha, 0x0083,
"Firmware image unavailable.\n");
ql_log(ql_log_info, vha, 0x0084,
"Firmware images can be retrieved from: "QLA_FW_URL ".\n");
return QLA_FUNCTION_FAILED;
}
rval = QLA_SUCCESS;
wcode = (uint16_t *)req->ring;
*srisc_addr = 0;
fwcode = (uint16_t *)blob->fw->data;
fwclen = 0;
/* Validate firmware image by checking version. */
if (blob->fw->size < 8 * sizeof(uint16_t)) {
ql_log(ql_log_fatal, vha, 0x0085,
"Unable to verify integrity of firmware image (%Zd).\n",
blob->fw->size);
goto fail_fw_integrity;
}
for (i = 0; i < 4; i++)
wcode[i] = be16_to_cpu(fwcode[i + 4]);
if ((wcode[0] == 0xffff && wcode[1] == 0xffff && wcode[2] == 0xffff &&
wcode[3] == 0xffff) || (wcode[0] == 0 && wcode[1] == 0 &&
wcode[2] == 0 && wcode[3] == 0)) {
ql_log(ql_log_fatal, vha, 0x0086,
"Unable to verify integrity of firmware image.\n");
ql_log(ql_log_fatal, vha, 0x0087,
"Firmware data: %04x %04x %04x %04x.\n",
wcode[0], wcode[1], wcode[2], wcode[3]);
goto fail_fw_integrity;
}
seg = blob->segs;
while (*seg && rval == QLA_SUCCESS) {
risc_addr = *seg;
*srisc_addr = *srisc_addr == 0 ? *seg : *srisc_addr;
risc_size = be16_to_cpu(fwcode[3]);
/* Validate firmware image size. */
fwclen += risc_size * sizeof(uint16_t);
if (blob->fw->size < fwclen) {
ql_log(ql_log_fatal, vha, 0x0088,
"Unable to verify integrity of firmware image "
"(%Zd).\n", blob->fw->size);
goto fail_fw_integrity;
}
fragment = 0;
while (risc_size > 0 && rval == QLA_SUCCESS) {
wlen = (uint16_t)(ha->fw_transfer_size >> 1);
if (wlen > risc_size)
wlen = risc_size;
ql_dbg(ql_dbg_init, vha, 0x0089,
"Loading risc segment@ risc addr %x number of "
"words 0x%x.\n", risc_addr, wlen);
for (i = 0; i < wlen; i++)
wcode[i] = swab16(fwcode[i]);
rval = qla2x00_load_ram(vha, req->dma, risc_addr,
wlen);
if (rval) {
ql_log(ql_log_fatal, vha, 0x008a,
"Failed to load segment %d of firmware.\n",
fragment);
break;
}
fwcode += wlen;
risc_addr += wlen;
risc_size -= wlen;
fragment++;
}
/* Next segment. */
seg++;
}
return rval;
fail_fw_integrity:
return QLA_FUNCTION_FAILED;
}
static int
qla24xx_load_risc_blob(scsi_qla_host_t *vha, uint32_t *srisc_addr)
{
int rval;
int segments, fragment;
uint32_t *dcode, dlen;
uint32_t risc_addr;
uint32_t risc_size;
uint32_t i;
struct fw_blob *blob;
const uint32_t *fwcode;
uint32_t fwclen;
struct qla_hw_data *ha = vha->hw;
struct req_que *req = ha->req_q_map[0];
/* Load firmware blob. */
blob = qla2x00_request_firmware(vha);
if (!blob) {
ql_log(ql_log_warn, vha, 0x0090,
"Firmware image unavailable.\n");
ql_log(ql_log_warn, vha, 0x0091,
"Firmware images can be retrieved from: "
QLA_FW_URL ".\n");
return QLA_FUNCTION_FAILED;
}
ql_dbg(ql_dbg_init, vha, 0x0092,
"FW: Loading via request-firmware.\n");
rval = QLA_SUCCESS;
segments = FA_RISC_CODE_SEGMENTS;
dcode = (uint32_t *)req->ring;
*srisc_addr = 0;
fwcode = (uint32_t *)blob->fw->data;
fwclen = 0;
/* Validate firmware image by checking version. */
if (blob->fw->size < 8 * sizeof(uint32_t)) {
ql_log(ql_log_fatal, vha, 0x0093,
"Unable to verify integrity of firmware image (%Zd).\n",
blob->fw->size);
return QLA_FUNCTION_FAILED;
}
for (i = 0; i < 4; i++)
dcode[i] = be32_to_cpu(fwcode[i + 4]);
if ((dcode[0] == 0xffffffff && dcode[1] == 0xffffffff &&
dcode[2] == 0xffffffff && dcode[3] == 0xffffffff) ||
(dcode[0] == 0 && dcode[1] == 0 && dcode[2] == 0 &&
dcode[3] == 0)) {
ql_log(ql_log_fatal, vha, 0x0094,
"Unable to verify integrity of firmware image (%Zd).\n",
blob->fw->size);
ql_log(ql_log_fatal, vha, 0x0095,
"Firmware data: %08x %08x %08x %08x.\n",
dcode[0], dcode[1], dcode[2], dcode[3]);
return QLA_FUNCTION_FAILED;
}
while (segments && rval == QLA_SUCCESS) {
risc_addr = be32_to_cpu(fwcode[2]);
*srisc_addr = *srisc_addr == 0 ? risc_addr : *srisc_addr;
risc_size = be32_to_cpu(fwcode[3]);
/* Validate firmware image size. */
fwclen += risc_size * sizeof(uint32_t);
if (blob->fw->size < fwclen) {
ql_log(ql_log_fatal, vha, 0x0096,
"Unable to verify integrity of firmware image "
"(%Zd).\n", blob->fw->size);
return QLA_FUNCTION_FAILED;
}
fragment = 0;
while (risc_size > 0 && rval == QLA_SUCCESS) {
dlen = (uint32_t)(ha->fw_transfer_size >> 2);
if (dlen > risc_size)
dlen = risc_size;
ql_dbg(ql_dbg_init, vha, 0x0097,
"Loading risc segment@ risc addr %x "
"number of dwords 0x%x.\n", risc_addr, dlen);
for (i = 0; i < dlen; i++)
dcode[i] = swab32(fwcode[i]);
rval = qla2x00_load_ram(vha, req->dma, risc_addr,
dlen);
if (rval) {
ql_log(ql_log_fatal, vha, 0x0098,
"Failed to load segment %d of firmware.\n",
fragment);
return QLA_FUNCTION_FAILED;
}
fwcode += dlen;
risc_addr += dlen;
risc_size -= dlen;
fragment++;
}
/* Next segment. */
segments--;
}
if (!IS_QLA27XX(ha))
return rval;
if (ha->fw_dump_template)
vfree(ha->fw_dump_template);
ha->fw_dump_template = NULL;
ha->fw_dump_template_len = 0;
ql_dbg(ql_dbg_init, vha, 0x171,
"Loading fwdump template from %x\n",
(uint32_t)((void *)fwcode - (void *)blob->fw->data));
risc_size = be32_to_cpu(fwcode[2]);
ql_dbg(ql_dbg_init, vha, 0x172,
"-> array size %x dwords\n", risc_size);
if (risc_size == 0 || risc_size == ~0)
goto default_template;
dlen = (risc_size - 8) * sizeof(*fwcode);
ql_dbg(ql_dbg_init, vha, 0x0173,
"-> template allocating %x bytes...\n", dlen);
ha->fw_dump_template = vmalloc(dlen);
if (!ha->fw_dump_template) {
ql_log(ql_log_warn, vha, 0x0174,
"Failed fwdump template allocate %x bytes.\n", risc_size);
goto default_template;
}
fwcode += 7;
risc_size -= 8;
dcode = ha->fw_dump_template;
for (i = 0; i < risc_size; i++)
dcode[i] = le32_to_cpu(fwcode[i]);
if (!qla27xx_fwdt_template_valid(dcode)) {
ql_log(ql_log_warn, vha, 0x0175,
"Failed fwdump template validate\n");
goto default_template;
}
dlen = qla27xx_fwdt_template_size(dcode);
ql_dbg(ql_dbg_init, vha, 0x0176,
"-> template size %x bytes\n", dlen);
if (dlen > risc_size * sizeof(*fwcode)) {
ql_log(ql_log_warn, vha, 0x0177,
"Failed fwdump template exceeds array by %x bytes\n",
(uint32_t)(dlen - risc_size * sizeof(*fwcode)));
goto default_template;
}
ha->fw_dump_template_len = dlen;
return rval;
default_template:
ql_log(ql_log_warn, vha, 0x0178, "Using default fwdump template\n");
if (ha->fw_dump_template)
vfree(ha->fw_dump_template);
ha->fw_dump_template = NULL;
ha->fw_dump_template_len = 0;
dlen = qla27xx_fwdt_template_default_size();
ql_dbg(ql_dbg_init, vha, 0x0179,
"-> template allocating %x bytes...\n", dlen);
ha->fw_dump_template = vmalloc(dlen);
if (!ha->fw_dump_template) {
ql_log(ql_log_warn, vha, 0x017a,
"Failed fwdump template allocate %x bytes.\n", risc_size);
goto failed_template;
}
dcode = ha->fw_dump_template;
risc_size = dlen / sizeof(*fwcode);
fwcode = qla27xx_fwdt_template_default();
for (i = 0; i < risc_size; i++)
dcode[i] = be32_to_cpu(fwcode[i]);
if (!qla27xx_fwdt_template_valid(ha->fw_dump_template)) {
ql_log(ql_log_warn, vha, 0x017b,
"Failed fwdump template validate\n");
goto failed_template;
}
dlen = qla27xx_fwdt_template_size(ha->fw_dump_template);
ql_dbg(ql_dbg_init, vha, 0x017c,
"-> template size %x bytes\n", dlen);
ha->fw_dump_template_len = dlen;
return rval;
failed_template:
ql_log(ql_log_warn, vha, 0x017d, "Failed default fwdump template\n");
if (ha->fw_dump_template)
vfree(ha->fw_dump_template);
ha->fw_dump_template = NULL;
ha->fw_dump_template_len = 0;
return rval;
}
int
qla24xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr)
{
int rval;
if (ql2xfwloadbin == 1)
return qla81xx_load_risc(vha, srisc_addr);
/*
* FW Load priority:
* 1) Firmware via request-firmware interface (.bin file).
* 2) Firmware residing in flash.
*/
rval = qla24xx_load_risc_blob(vha, srisc_addr);
if (rval == QLA_SUCCESS)
return rval;
return qla24xx_load_risc_flash(vha, srisc_addr,
vha->hw->flt_region_fw);
}
int
qla81xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr)
{
int rval;
struct qla_hw_data *ha = vha->hw;
if (ql2xfwloadbin == 2)
goto try_blob_fw;
/*
* FW Load priority:
* 1) Firmware residing in flash.
* 2) Firmware via request-firmware interface (.bin file).
* 3) Golden-Firmware residing in flash -- limited operation.
*/
rval = qla24xx_load_risc_flash(vha, srisc_addr, ha->flt_region_fw);
if (rval == QLA_SUCCESS)
return rval;
try_blob_fw:
rval = qla24xx_load_risc_blob(vha, srisc_addr);
if (rval == QLA_SUCCESS || !ha->flt_region_gold_fw)
return rval;
ql_log(ql_log_info, vha, 0x0099,
"Attempting to fallback to golden firmware.\n");
rval = qla24xx_load_risc_flash(vha, srisc_addr, ha->flt_region_gold_fw);
if (rval != QLA_SUCCESS)
return rval;
ql_log(ql_log_info, vha, 0x009a, "Update operational firmware.\n");
ha->flags.running_gold_fw = 1;
return rval;
}
void
qla2x00_try_to_stop_firmware(scsi_qla_host_t *vha)
{
int ret, retries;
struct qla_hw_data *ha = vha->hw;
if (ha->flags.pci_channel_io_perm_failure)
return;
if (!IS_FWI2_CAPABLE(ha))
return;
if (!ha->fw_major_version)
return;
ret = qla2x00_stop_firmware(vha);
for (retries = 5; ret != QLA_SUCCESS && ret != QLA_FUNCTION_TIMEOUT &&
ret != QLA_INVALID_COMMAND && retries ; retries--) {
ha->isp_ops->reset_chip(vha);
if (ha->isp_ops->chip_diag(vha) != QLA_SUCCESS)
continue;
if (qla2x00_setup_chip(vha) != QLA_SUCCESS)
continue;
ql_log(ql_log_info, vha, 0x8015,
"Attempting retry of stop-firmware command.\n");
ret = qla2x00_stop_firmware(vha);
}
}
int
qla24xx_configure_vhba(scsi_qla_host_t *vha)
{
int rval = QLA_SUCCESS;
int rval2;
uint16_t mb[MAILBOX_REGISTER_COUNT];
struct qla_hw_data *ha = vha->hw;
struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev);
struct req_que *req;
struct rsp_que *rsp;
if (!vha->vp_idx)
return -EINVAL;
rval = qla2x00_fw_ready(base_vha);
if (ha->flags.cpu_affinity_enabled)
req = ha->req_q_map[0];
else
req = vha->req;
rsp = req->rsp;
if (rval == QLA_SUCCESS) {
clear_bit(RESET_MARKER_NEEDED, &vha->dpc_flags);
qla2x00_marker(vha, req, rsp, 0, 0, MK_SYNC_ALL);
}
vha->flags.management_server_logged_in = 0;
/* Login to SNS first */
rval2 = ha->isp_ops->fabric_login(vha, NPH_SNS, 0xff, 0xff, 0xfc, mb,
BIT_1);
if (rval2 != QLA_SUCCESS || mb[0] != MBS_COMMAND_COMPLETE) {
if (rval2 == QLA_MEMORY_ALLOC_FAILED)
ql_dbg(ql_dbg_init, vha, 0x0120,
"Failed SNS login: loop_id=%x, rval2=%d\n",
NPH_SNS, rval2);
else
ql_dbg(ql_dbg_init, vha, 0x0103,
"Failed SNS login: loop_id=%x mb[0]=%x mb[1]=%x "
"mb[2]=%x mb[6]=%x mb[7]=%x.\n",
NPH_SNS, mb[0], mb[1], mb[2], mb[6], mb[7]);
return (QLA_FUNCTION_FAILED);
}
atomic_set(&vha->loop_down_timer, 0);
atomic_set(&vha->loop_state, LOOP_UP);
set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
set_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags);
rval = qla2x00_loop_resync(base_vha);
return rval;
}
/* 84XX Support **************************************************************/
static LIST_HEAD(qla_cs84xx_list);
static DEFINE_MUTEX(qla_cs84xx_mutex);
static struct qla_chip_state_84xx *
qla84xx_get_chip(struct scsi_qla_host *vha)
{
struct qla_chip_state_84xx *cs84xx;
struct qla_hw_data *ha = vha->hw;
mutex_lock(&qla_cs84xx_mutex);
/* Find any shared 84xx chip. */
list_for_each_entry(cs84xx, &qla_cs84xx_list, list) {
if (cs84xx->bus == ha->pdev->bus) {
kref_get(&cs84xx->kref);
goto done;
}
}
cs84xx = kzalloc(sizeof(*cs84xx), GFP_KERNEL);
if (!cs84xx)
goto done;
kref_init(&cs84xx->kref);
spin_lock_init(&cs84xx->access_lock);
mutex_init(&cs84xx->fw_update_mutex);
cs84xx->bus = ha->pdev->bus;
list_add_tail(&cs84xx->list, &qla_cs84xx_list);
done:
mutex_unlock(&qla_cs84xx_mutex);
return cs84xx;
}
static void
__qla84xx_chip_release(struct kref *kref)
{
struct qla_chip_state_84xx *cs84xx =
container_of(kref, struct qla_chip_state_84xx, kref);
mutex_lock(&qla_cs84xx_mutex);
list_del(&cs84xx->list);
mutex_unlock(&qla_cs84xx_mutex);
kfree(cs84xx);
}
void
qla84xx_put_chip(struct scsi_qla_host *vha)
{
struct qla_hw_data *ha = vha->hw;
if (ha->cs84xx)
kref_put(&ha->cs84xx->kref, __qla84xx_chip_release);
}
static int
qla84xx_init_chip(scsi_qla_host_t *vha)
{
int rval;
uint16_t status[2];
struct qla_hw_data *ha = vha->hw;
mutex_lock(&ha->cs84xx->fw_update_mutex);
rval = qla84xx_verify_chip(vha, status);
mutex_unlock(&ha->cs84xx->fw_update_mutex);
return rval != QLA_SUCCESS || status[0] ? QLA_FUNCTION_FAILED:
QLA_SUCCESS;
}
/* 81XX Support **************************************************************/
int
qla81xx_nvram_config(scsi_qla_host_t *vha)
{
int rval;
struct init_cb_81xx *icb;
struct nvram_81xx *nv;
uint32_t *dptr;
uint8_t *dptr1, *dptr2;
uint32_t chksum;
uint16_t cnt;
struct qla_hw_data *ha = vha->hw;
rval = QLA_SUCCESS;
icb = (struct init_cb_81xx *)ha->init_cb;
nv = ha->nvram;
/* Determine NVRAM starting address. */
ha->nvram_size = sizeof(struct nvram_81xx);
ha->vpd_size = FA_NVRAM_VPD_SIZE;
if (IS_P3P_TYPE(ha) || IS_QLA8031(ha))
ha->vpd_size = FA_VPD_SIZE_82XX;
/* Get VPD data into cache */
ha->vpd = ha->nvram + VPD_OFFSET;
ha->isp_ops->read_optrom(vha, ha->vpd, ha->flt_region_vpd << 2,
ha->vpd_size);
/* Get NVRAM data into cache and calculate checksum. */
ha->isp_ops->read_optrom(vha, ha->nvram, ha->flt_region_nvram << 2,
ha->nvram_size);
dptr = (uint32_t *)nv;
for (cnt = 0, chksum = 0; cnt < ha->nvram_size >> 2; cnt++, dptr++)
chksum += le32_to_cpu(*dptr);
ql_dbg(ql_dbg_init + ql_dbg_buffer, vha, 0x0111,
"Contents of NVRAM:\n");
ql_dump_buffer(ql_dbg_init + ql_dbg_buffer, vha, 0x0112,
(uint8_t *)nv, ha->nvram_size);
/* Bad NVRAM data, set defaults parameters. */
if (chksum || nv->id[0] != 'I' || nv->id[1] != 'S' || nv->id[2] != 'P'
|| nv->id[3] != ' ' ||
nv->nvram_version < cpu_to_le16(ICB_VERSION)) {
/* Reset NVRAM data. */
ql_log(ql_log_info, vha, 0x0073,
"Inconsistent NVRAM detected: checksum=0x%x id=%c "
"version=0x%x.\n", chksum, nv->id[0],
le16_to_cpu(nv->nvram_version));
ql_log(ql_log_info, vha, 0x0074,
"Falling back to functioning (yet invalid -- WWPN) "
"defaults.\n");
/*
* Set default initialization control block.
*/
memset(nv, 0, ha->nvram_size);
nv->nvram_version = cpu_to_le16(ICB_VERSION);
nv->version = cpu_to_le16(ICB_VERSION);
nv->frame_payload_size = 2048;
nv->execution_throttle = cpu_to_le16(0xFFFF);
nv->exchange_count = cpu_to_le16(0);
nv->port_name[0] = 0x21;
nv->port_name[1] = 0x00 + ha->port_no + 1;
nv->port_name[2] = 0x00;
nv->port_name[3] = 0xe0;
nv->port_name[4] = 0x8b;
nv->port_name[5] = 0x1c;
nv->port_name[6] = 0x55;
nv->port_name[7] = 0x86;
nv->node_name[0] = 0x20;
nv->node_name[1] = 0x00;
nv->node_name[2] = 0x00;
nv->node_name[3] = 0xe0;
nv->node_name[4] = 0x8b;
nv->node_name[5] = 0x1c;
nv->node_name[6] = 0x55;
nv->node_name[7] = 0x86;
nv->login_retry_count = cpu_to_le16(8);
nv->interrupt_delay_timer = cpu_to_le16(0);
nv->login_timeout = cpu_to_le16(0);
nv->firmware_options_1 =
cpu_to_le32(BIT_14|BIT_13|BIT_2|BIT_1);
nv->firmware_options_2 = cpu_to_le32(2 << 4);
nv->firmware_options_2 |= cpu_to_le32(BIT_12);
nv->firmware_options_3 = cpu_to_le32(2 << 13);
nv->host_p = cpu_to_le32(BIT_11|BIT_10);
nv->efi_parameters = cpu_to_le32(0);
nv->reset_delay = 5;
nv->max_luns_per_target = cpu_to_le16(128);
nv->port_down_retry_count = cpu_to_le16(30);
nv->link_down_timeout = cpu_to_le16(180);
nv->enode_mac[0] = 0x00;
nv->enode_mac[1] = 0xC0;
nv->enode_mac[2] = 0xDD;
nv->enode_mac[3] = 0x04;
nv->enode_mac[4] = 0x05;
nv->enode_mac[5] = 0x06 + ha->port_no + 1;
rval = 1;
}
if (IS_T10_PI_CAPABLE(ha))
nv->frame_payload_size &= ~7;
qlt_81xx_config_nvram_stage1(vha, nv);
/* Reset Initialization control block */
memset(icb, 0, ha->init_cb_size);
/* Copy 1st segment. */
dptr1 = (uint8_t *)icb;
dptr2 = (uint8_t *)&nv->version;
cnt = (uint8_t *)&icb->response_q_inpointer - (uint8_t *)&icb->version;
while (cnt--)
*dptr1++ = *dptr2++;
icb->login_retry_count = nv->login_retry_count;
/* Copy 2nd segment. */
dptr1 = (uint8_t *)&icb->interrupt_delay_timer;
dptr2 = (uint8_t *)&nv->interrupt_delay_timer;
cnt = (uint8_t *)&icb->reserved_5 -
(uint8_t *)&icb->interrupt_delay_timer;
while (cnt--)
*dptr1++ = *dptr2++;
memcpy(icb->enode_mac, nv->enode_mac, sizeof(icb->enode_mac));
/* Some boards (with valid NVRAMs) still have NULL enode_mac!! */
if (!memcmp(icb->enode_mac, "\0\0\0\0\0\0", sizeof(icb->enode_mac))) {
icb->enode_mac[0] = 0x00;
icb->enode_mac[1] = 0xC0;
icb->enode_mac[2] = 0xDD;
icb->enode_mac[3] = 0x04;
icb->enode_mac[4] = 0x05;
icb->enode_mac[5] = 0x06 + ha->port_no + 1;
}
/* Use extended-initialization control block. */
memcpy(ha->ex_init_cb, &nv->ex_version, sizeof(*ha->ex_init_cb));
/*
* Setup driver NVRAM options.
*/
qla2x00_set_model_info(vha, nv->model_name, sizeof(nv->model_name),
"QLE8XXX");
qlt_81xx_config_nvram_stage2(vha, icb);
/* Use alternate WWN? */
if (nv->host_p & cpu_to_le32(BIT_15)) {
memcpy(icb->node_name, nv->alternate_node_name, WWN_SIZE);
memcpy(icb->port_name, nv->alternate_port_name, WWN_SIZE);
}
/* Prepare nodename */
if ((icb->firmware_options_1 & cpu_to_le32(BIT_14)) == 0) {
/*
* Firmware will apply the following mask if the nodename was
* not provided.
*/
memcpy(icb->node_name, icb->port_name, WWN_SIZE);
icb->node_name[0] &= 0xF0;
}
/* Set host adapter parameters. */
ha->flags.disable_risc_code_load = 0;
ha->flags.enable_lip_reset = 0;
ha->flags.enable_lip_full_login =
le32_to_cpu(nv->host_p) & BIT_10 ? 1: 0;
ha->flags.enable_target_reset =
le32_to_cpu(nv->host_p) & BIT_11 ? 1: 0;
ha->flags.enable_led_scheme = 0;
ha->flags.disable_serdes = le32_to_cpu(nv->host_p) & BIT_5 ? 1: 0;
ha->operating_mode = (le32_to_cpu(icb->firmware_options_2) &
(BIT_6 | BIT_5 | BIT_4)) >> 4;
/* save HBA serial number */
ha->serial0 = icb->port_name[5];
ha->serial1 = icb->port_name[6];
ha->serial2 = icb->port_name[7];
memcpy(vha->node_name, icb->node_name, WWN_SIZE);
memcpy(vha->port_name, icb->port_name, WWN_SIZE);
icb->execution_throttle = cpu_to_le16(0xFFFF);
ha->retry_count = le16_to_cpu(nv->login_retry_count);
/* Set minimum login_timeout to 4 seconds. */
if (le16_to_cpu(nv->login_timeout) < ql2xlogintimeout)
nv->login_timeout = cpu_to_le16(ql2xlogintimeout);
if (le16_to_cpu(nv->login_timeout) < 4)
nv->login_timeout = cpu_to_le16(4);
ha->login_timeout = le16_to_cpu(nv->login_timeout);
/* Set minimum RATOV to 100 tenths of a second. */
ha->r_a_tov = 100;
ha->loop_reset_delay = nv->reset_delay;
/* Link Down Timeout = 0:
*
* When Port Down timer expires we will start returning
* I/O's to OS with "DID_NO_CONNECT".
*
* Link Down Timeout != 0:
*
* The driver waits for the link to come up after link down
* before returning I/Os to OS with "DID_NO_CONNECT".
*/
if (le16_to_cpu(nv->link_down_timeout) == 0) {
ha->loop_down_abort_time =
(LOOP_DOWN_TIME - LOOP_DOWN_TIMEOUT);
} else {
ha->link_down_timeout = le16_to_cpu(nv->link_down_timeout);
ha->loop_down_abort_time =
(LOOP_DOWN_TIME - ha->link_down_timeout);
}
/* Need enough time to try and get the port back. */
ha->port_down_retry_count = le16_to_cpu(nv->port_down_retry_count);
if (qlport_down_retry)
ha->port_down_retry_count = qlport_down_retry;
/* Set login_retry_count */
ha->login_retry_count = le16_to_cpu(nv->login_retry_count);
if (ha->port_down_retry_count ==
le16_to_cpu(nv->port_down_retry_count) &&
ha->port_down_retry_count > 3)
ha->login_retry_count = ha->port_down_retry_count;
else if (ha->port_down_retry_count > (int)ha->login_retry_count)
ha->login_retry_count = ha->port_down_retry_count;
if (ql2xloginretrycount)
ha->login_retry_count = ql2xloginretrycount;
/* if not running MSI-X we need handshaking on interrupts */
if (!vha->hw->flags.msix_enabled && (IS_QLA83XX(ha) || IS_QLA27XX(ha)))
icb->firmware_options_2 |= cpu_to_le32(BIT_22);
/* Enable ZIO. */
if (!vha->flags.init_done) {
ha->zio_mode = le32_to_cpu(icb->firmware_options_2) &
(BIT_3 | BIT_2 | BIT_1 | BIT_0);
ha->zio_timer = le16_to_cpu(icb->interrupt_delay_timer) ?
le16_to_cpu(icb->interrupt_delay_timer): 2;
}
icb->firmware_options_2 &= cpu_to_le32(
~(BIT_3 | BIT_2 | BIT_1 | BIT_0));
vha->flags.process_response_queue = 0;
if (ha->zio_mode != QLA_ZIO_DISABLED) {
ha->zio_mode = QLA_ZIO_MODE_6;
ql_log(ql_log_info, vha, 0x0075,
"ZIO mode %d enabled; timer delay (%d us).\n",
ha->zio_mode,
ha->zio_timer * 100);
icb->firmware_options_2 |= cpu_to_le32(
(uint32_t)ha->zio_mode);
icb->interrupt_delay_timer = cpu_to_le16(ha->zio_timer);
vha->flags.process_response_queue = 1;
}
if (rval) {
ql_log(ql_log_warn, vha, 0x0076,
"NVRAM configuration failed.\n");
}
return (rval);
}
int
qla82xx_restart_isp(scsi_qla_host_t *vha)
{
int status, rval;
struct qla_hw_data *ha = vha->hw;
struct req_que *req = ha->req_q_map[0];
struct rsp_que *rsp = ha->rsp_q_map[0];
struct scsi_qla_host *vp;
unsigned long flags;
status = qla2x00_init_rings(vha);
if (!status) {
clear_bit(RESET_MARKER_NEEDED, &vha->dpc_flags);
ha->flags.chip_reset_done = 1;
status = qla2x00_fw_ready(vha);
if (!status) {
/* Issue a marker after FW becomes ready. */
qla2x00_marker(vha, req, rsp, 0, 0, MK_SYNC_ALL);
vha->flags.online = 1;
set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
}
/* if no cable then assume it's good */
if ((vha->device_flags & DFLG_NO_CABLE))
status = 0;
}
if (!status) {
clear_bit(RESET_MARKER_NEEDED, &vha->dpc_flags);
if (!atomic_read(&vha->loop_down_timer)) {
/*
* Issue marker command only when we are going
* to start the I/O .
*/
vha->marker_needed = 1;
}
ha->isp_ops->enable_intrs(ha);
ha->isp_abort_cnt = 0;
clear_bit(ISP_ABORT_RETRY, &vha->dpc_flags);
/* Update the firmware version */
status = qla82xx_check_md_needed(vha);
if (ha->fce) {
ha->flags.fce_enabled = 1;
memset(ha->fce, 0,
fce_calc_size(ha->fce_bufs));
rval = qla2x00_enable_fce_trace(vha,
ha->fce_dma, ha->fce_bufs, ha->fce_mb,
&ha->fce_bufs);
if (rval) {
ql_log(ql_log_warn, vha, 0x8001,
"Unable to reinitialize FCE (%d).\n",
rval);
ha->flags.fce_enabled = 0;
}
}
if (ha->eft) {
memset(ha->eft, 0, EFT_SIZE);
rval = qla2x00_enable_eft_trace(vha,
ha->eft_dma, EFT_NUM_BUFFERS);
if (rval) {
ql_log(ql_log_warn, vha, 0x8010,
"Unable to reinitialize EFT (%d).\n",
rval);
}
}
}
if (!status) {
ql_dbg(ql_dbg_taskm, vha, 0x8011,
"qla82xx_restart_isp succeeded.\n");
spin_lock_irqsave(&ha->vport_slock, flags);
list_for_each_entry(vp, &ha->vp_list, list) {
if (vp->vp_idx) {
atomic_inc(&vp->vref_count);
spin_unlock_irqrestore(&ha->vport_slock, flags);
qla2x00_vp_abort_isp(vp);
spin_lock_irqsave(&ha->vport_slock, flags);
atomic_dec(&vp->vref_count);
}
}
spin_unlock_irqrestore(&ha->vport_slock, flags);
} else {
ql_log(ql_log_warn, vha, 0x8016,
"qla82xx_restart_isp **** FAILED ****.\n");
}
return status;
}
void
qla81xx_update_fw_options(scsi_qla_host_t *vha)
{
struct qla_hw_data *ha = vha->hw;
/* Hold status IOCBs until ABTS response received. */
if (ql2xfwholdabts)
ha->fw_options[3] |= BIT_12;
if (!ql2xetsenable)
goto out;
/* Enable ETS Burst. */
memset(ha->fw_options, 0, sizeof(ha->fw_options));
ha->fw_options[2] |= BIT_9;
out:
qla2x00_set_fw_options(vha, ha->fw_options);
}
/*
* qla24xx_get_fcp_prio
* Gets the fcp cmd priority value for the logged in port.
* Looks for a match of the port descriptors within
* each of the fcp prio config entries. If a match is found,
* the tag (priority) value is returned.
*
* Input:
* vha = scsi host structure pointer.
* fcport = port structure pointer.
*
* Return:
* non-zero (if found)
* -1 (if not found)
*
* Context:
* Kernel context
*/
static int
qla24xx_get_fcp_prio(scsi_qla_host_t *vha, fc_port_t *fcport)
{
int i, entries;
uint8_t pid_match, wwn_match;
int priority;
uint32_t pid1, pid2;
uint64_t wwn1, wwn2;
struct qla_fcp_prio_entry *pri_entry;
struct qla_hw_data *ha = vha->hw;
if (!ha->fcp_prio_cfg || !ha->flags.fcp_prio_enabled)
return -1;
priority = -1;
entries = ha->fcp_prio_cfg->num_entries;
pri_entry = &ha->fcp_prio_cfg->entry[0];
for (i = 0; i < entries; i++) {
pid_match = wwn_match = 0;
if (!(pri_entry->flags & FCP_PRIO_ENTRY_VALID)) {
pri_entry++;
continue;
}
/* check source pid for a match */
if (pri_entry->flags & FCP_PRIO_ENTRY_SPID_VALID) {
pid1 = pri_entry->src_pid & INVALID_PORT_ID;
pid2 = vha->d_id.b24 & INVALID_PORT_ID;
if (pid1 == INVALID_PORT_ID)
pid_match++;
else if (pid1 == pid2)
pid_match++;
}
/* check destination pid for a match */
if (pri_entry->flags & FCP_PRIO_ENTRY_DPID_VALID) {
pid1 = pri_entry->dst_pid & INVALID_PORT_ID;
pid2 = fcport->d_id.b24 & INVALID_PORT_ID;
if (pid1 == INVALID_PORT_ID)
pid_match++;
else if (pid1 == pid2)
pid_match++;
}
/* check source WWN for a match */
if (pri_entry->flags & FCP_PRIO_ENTRY_SWWN_VALID) {
wwn1 = wwn_to_u64(vha->port_name);
wwn2 = wwn_to_u64(pri_entry->src_wwpn);
if (wwn2 == (uint64_t)-1)
wwn_match++;
else if (wwn1 == wwn2)
wwn_match++;
}
/* check destination WWN for a match */
if (pri_entry->flags & FCP_PRIO_ENTRY_DWWN_VALID) {
wwn1 = wwn_to_u64(fcport->port_name);
wwn2 = wwn_to_u64(pri_entry->dst_wwpn);
if (wwn2 == (uint64_t)-1)
wwn_match++;
else if (wwn1 == wwn2)
wwn_match++;
}
if (pid_match == 2 || wwn_match == 2) {
/* Found a matching entry */
if (pri_entry->flags & FCP_PRIO_ENTRY_TAG_VALID)
priority = pri_entry->tag;
break;
}
pri_entry++;
}
return priority;
}
/*
* qla24xx_update_fcport_fcp_prio
* Activates fcp priority for the logged in fc port
*
* Input:
* vha = scsi host structure pointer.
* fcp = port structure pointer.
*
* Return:
* QLA_SUCCESS or QLA_FUNCTION_FAILED
*
* Context:
* Kernel context.
*/
int
qla24xx_update_fcport_fcp_prio(scsi_qla_host_t *vha, fc_port_t *fcport)
{
int ret;
int priority;
uint16_t mb[5];
if (fcport->port_type != FCT_TARGET ||
fcport->loop_id == FC_NO_LOOP_ID)
return QLA_FUNCTION_FAILED;
priority = qla24xx_get_fcp_prio(vha, fcport);
if (priority < 0)
return QLA_FUNCTION_FAILED;
if (IS_P3P_TYPE(vha->hw)) {
fcport->fcp_prio = priority & 0xf;
return QLA_SUCCESS;
}
ret = qla24xx_set_fcp_prio(vha, fcport->loop_id, priority, mb);
if (ret == QLA_SUCCESS) {
if (fcport->fcp_prio != priority)
ql_dbg(ql_dbg_user, vha, 0x709e,
"Updated FCP_CMND priority - value=%d loop_id=%d "
"port_id=%02x%02x%02x.\n", priority,
fcport->loop_id, fcport->d_id.b.domain,
fcport->d_id.b.area, fcport->d_id.b.al_pa);
fcport->fcp_prio = priority & 0xf;
} else
ql_dbg(ql_dbg_user, vha, 0x704f,
"Unable to update FCP_CMND priority - ret=0x%x for "
"loop_id=%d port_id=%02x%02x%02x.\n", ret, fcport->loop_id,
fcport->d_id.b.domain, fcport->d_id.b.area,
fcport->d_id.b.al_pa);
return ret;
}
/*
* qla24xx_update_all_fcp_prio
* Activates fcp priority for all the logged in ports
*
* Input:
* ha = adapter block pointer.
*
* Return:
* QLA_SUCCESS or QLA_FUNCTION_FAILED
*
* Context:
* Kernel context.
*/
int
qla24xx_update_all_fcp_prio(scsi_qla_host_t *vha)
{
int ret;
fc_port_t *fcport;
ret = QLA_FUNCTION_FAILED;
/* We need to set priority for all logged in ports */
list_for_each_entry(fcport, &vha->vp_fcports, list)
ret = qla24xx_update_fcport_fcp_prio(vha, fcport);
return ret;
}
Reference in New Issue View Git Blame Copy Permalink