AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-05 10:06:48 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
d4c7e649d7
linux_dsm_epyc7002/arch/alpha/Kconfig
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license 
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

753 lines
22 KiB
Plaintext
Raw Blame History

# SPDX-License-Identifier: GPL-2.0
config ALPHA
bool
default y
select ARCH_MIGHT_HAVE_PC_PARPORT
select ARCH_MIGHT_HAVE_PC_SERIO
select ARCH_USE_CMPXCHG_LOCKREF
select HAVE_AOUT
select HAVE_IDE
select HAVE_OPROFILE
select HAVE_PCSPKR_PLATFORM
select HAVE_PERF_EVENTS
select VIRT_TO_BUS
select GENERIC_IRQ_PROBE
select AUTO_IRQ_AFFINITY if SMP
select GENERIC_IRQ_SHOW
select ARCH_WANT_IPC_PARSE_VERSION
select ARCH_HAVE_NMI_SAFE_CMPXCHG
select AUDIT_ARCH
select GENERIC_CLOCKEVENTS
select GENERIC_SMP_IDLE_THREAD
select GENERIC_STRNCPY_FROM_USER
select GENERIC_STRNLEN_USER
select HAVE_ARCH_AUDITSYSCALL
select HAVE_MOD_ARCH_SPECIFIC
select MODULES_USE_ELF_RELA
select ODD_RT_SIGACTION
select OLD_SIGSUSPEND
select CPU_NO_EFFICIENT_FFS if !ALPHA_EV67
help
The Alpha is a 64-bit general-purpose processor designed and
marketed by the Digital Equipment Corporation of blessed memory,
now Hewlett-Packard. The Alpha Linux project has a home page at
<http://www.alphalinux.org/>.
config 64BIT
def_bool y
config MMU
bool
default y
config RWSEM_GENERIC_SPINLOCK
bool
config RWSEM_XCHGADD_ALGORITHM
bool
default y
config ARCH_HAS_ILOG2_U32
bool
default n
config ARCH_HAS_ILOG2_U64
bool
default n
config GENERIC_CALIBRATE_DELAY
bool
default y
config ZONE_DMA
bool
default y
config ARCH_DMA_ADDR_T_64BIT
def_bool y
config NEED_DMA_MAP_STATE
def_bool y
config NEED_SG_DMA_LENGTH
def_bool y
config GENERIC_ISA_DMA
bool
default y
config PGTABLE_LEVELS
int
default 3
source "init/Kconfig"
source "kernel/Kconfig.freezer"
config AUDIT_ARCH
bool
menu "System setup"
choice
prompt "Alpha system type"
default ALPHA_GENERIC
---help---
This is the system type of your hardware. A "generic" kernel will
run on any supported Alpha system. However, if you configure a
kernel for your specific system, it will be faster and smaller.
To find out what type of Alpha system you have, you may want to
check out the Linux/Alpha FAQ, accessible on the WWW from
<http://www.alphalinux.org/>. In summary:
Alcor/Alpha-XLT AS 600, AS 500, XL-300, XL-366
Alpha-XL XL-233, XL-266
AlphaBook1 Alpha laptop
Avanti AS 200, AS 205, AS 250, AS 255, AS 300, AS 400
Cabriolet AlphaPC64, AlphaPCI64
DP264 DP264 / DS20 / ES40 / DS10 / DS10L
EB164 EB164 21164 evaluation board
EB64+ EB64+ 21064 evaluation board
EB66 EB66 21066 evaluation board
EB66+ EB66+ 21066 evaluation board
Jensen DECpc 150, DEC 2000 models 300, 500
LX164 AlphaPC164-LX
Lynx AS 2100A
Miata Personal Workstation 433/500/600 a/au
Marvel AlphaServer ES47 / ES80 / GS1280
Mikasa AS 1000
Noname AXPpci33, UDB (Multia)
Noritake AS 1000A, AS 600A, AS 800
PC164 AlphaPC164
Rawhide AS 1200, AS 4000, AS 4100
Ruffian RPX164-2, AlphaPC164-UX, AlphaPC164-BX
SX164 AlphaPC164-SX
Sable AS 2000, AS 2100
Shark DS 20L
Takara Takara (OEM)
Titan AlphaServer ES45 / DS25 / DS15
Wildfire AlphaServer GS 40/80/160/320
If you don't know what to do, choose "generic".
config ALPHA_GENERIC
bool "Generic"
depends on TTY
help
A generic kernel will run on all supported Alpha hardware.
config ALPHA_ALCOR
bool "Alcor/Alpha-XLT"
help
For systems using the Digital ALCOR chipset: 5 chips (4, 64-bit data
slices (Data Switch, DSW) - 208-pin PQFP and 1 control (Control, I/O
Address, CIA) - a 383 pin plastic PGA). It provides a DRAM
controller (256-bit memory bus) and a PCI interface. It also does
all the work required to support an external Bcache and to maintain
memory coherence when a PCI device DMAs into (or out of) memory.
config ALPHA_XL
bool "Alpha-XL"
help
XL-233 and XL-266-based Alpha systems.
config ALPHA_BOOK1
bool "AlphaBook1"
help
Dec AlphaBook1/Burns Alpha-based laptops.
config ALPHA_AVANTI_CH
bool "Avanti"
config ALPHA_CABRIOLET
bool "Cabriolet"
help
Cabriolet AlphaPC64, AlphaPCI64 systems. Derived from EB64+ but now
baby-AT with Flash boot ROM, no on-board SCSI or Ethernet. 3 ISA
slots, 4 PCI slots (one pair are on a shared slot), uses plug-in
Bcache SIMMs. Requires power supply with 3.3V output.
config ALPHA_DP264
bool "DP264"
help
Various 21264 systems with the tsunami core logic chipset.
API Networks: 264DP, UP2000(+), CS20;
Compaq: DS10(E,L), XP900, XP1000, DS20(E), ES40.
config ALPHA_EB164
bool "EB164"
help
EB164 21164 evaluation board from DEC. Uses 21164 and ALCOR. Has
ISA and PCI expansion (3 ISA slots, 2 64-bit PCI slots (one is
shared with an ISA slot) and 2 32-bit PCI slots. Uses plus-in
Bcache SIMMs. I/O sub-system provides SuperI/O (2S, 1P, FD), KBD,
MOUSE (PS2 style), RTC/NVRAM. Boot ROM is Flash. PC-AT-sized
motherboard. Requires power supply with 3.3V output.
config ALPHA_EB64P_CH
bool "EB64+"
config ALPHA_EB66
bool "EB66"
help
A Digital DS group board. Uses 21066 or 21066A. I/O sub-system is
identical to EB64+. Baby PC-AT size. Runs from standard PC power
supply. The EB66 schematic was published as a marketing poster
advertising the 21066 as "the first microprocessor in the world with
embedded PCI".
config ALPHA_EB66P
bool "EB66+"
help
Later variant of the EB66 board.
config ALPHA_EIGER
bool "Eiger"
help
Apparently an obscure OEM single-board computer based on the
Typhoon/Tsunami chipset family. Information on it is scanty.
config ALPHA_JENSEN
bool "Jensen"
help
DEC PC 150 AXP (aka Jensen): This is a very old Digital system - one
of the first-generation Alpha systems. A number of these systems
seem to be available on the second- hand market. The Jensen is a
floor-standing tower system which originally used a 150MHz 21064 It
used programmable logic to interface a 486 EISA I/O bridge to the
CPU.
config ALPHA_LX164
bool "LX164"
help
A technical overview of this board is available at
<http://www.unix-ag.org/Linux-Alpha/Architectures/LX164.html>.
config ALPHA_LYNX
bool "Lynx"
help
AlphaServer 2100A-based systems.
config ALPHA_MARVEL
bool "Marvel"
help
AlphaServer ES47 / ES80 / GS1280 based on EV7.
config ALPHA_MIATA
bool "Miata"
help
The Digital PersonalWorkStation (PWS 433a, 433au, 500a, 500au, 600a,
or 600au).
config ALPHA_MIKASA
bool "Mikasa"
help
AlphaServer 1000-based Alpha systems.
config ALPHA_NAUTILUS
bool "Nautilus"
help
Alpha systems based on the AMD 751 & ALI 1543C chipsets.
config ALPHA_NONAME_CH
bool "Noname"
config ALPHA_NORITAKE
bool "Noritake"
help
AlphaServer 1000A, AlphaServer 600A, and AlphaServer 800-based
systems.
config ALPHA_PC164
bool "PC164"
config ALPHA_P2K
bool "Platform2000"
config ALPHA_RAWHIDE
bool "Rawhide"
help
AlphaServer 1200, AlphaServer 4000 and AlphaServer 4100 machines.
See HOWTO at
<http://www.alphalinux.org/docs/rawhide/4100_install.shtml>.
config ALPHA_RUFFIAN
bool "Ruffian"
help
Samsung APC164UX. There is a page on known problems and workarounds
at <http://www.alphalinux.org/faq/FAQ-11.html>.
config ALPHA_RX164
bool "RX164"
config ALPHA_SX164
bool "SX164"
config ALPHA_SABLE
bool "Sable"
help
Digital AlphaServer 2000 and 2100-based systems.
config ALPHA_SHARK
bool "Shark"
config ALPHA_TAKARA
bool "Takara"
help
Alpha 11164-based OEM single-board computer.
config ALPHA_TITAN
bool "Titan"
help
AlphaServer ES45/DS25 SMP based on EV68 and Titan chipset.
config ALPHA_WILDFIRE
bool "Wildfire"
help
AlphaServer GS 40/80/160/320 SMP based on the EV67 core.
endchoice
# clear all implied options (don't want default values for those):
# Most of these machines have ISA slots; not exactly sure which don't,
# and this doesn't activate hordes of code, so do it always.
config ISA
bool
default y
help
Find out whether you have ISA slots on your motherboard. ISA is the
name of a bus system, i.e. the way the CPU talks to the other stuff
inside your box. Other bus systems are PCI, EISA, MicroChannel
(MCA) or VESA. ISA is an older system, now being displaced by PCI;
newer boards don't support it. If you have ISA, say Y, otherwise N.
config ISA_DMA_API
bool
default y
config PCI
bool
depends on !ALPHA_JENSEN
select GENERIC_PCI_IOMAP
default y
help
Find out whether you have a PCI motherboard. PCI is the name of a
bus system, i.e. the way the CPU talks to the other stuff inside
your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
VESA. If you have PCI, say Y, otherwise N.
config PCI_DOMAINS
bool
default y
config PCI_SYSCALL
def_bool PCI
config IOMMU_HELPER
def_bool PCI
config ALPHA_NONAME
bool
depends on ALPHA_BOOK1 || ALPHA_NONAME_CH
default y
help
The AXPpci33 (aka NoName), is based on the EB66 (includes the Multia
UDB). This design was produced by Digital's Technical OEM (TOEM)
group. It uses the 21066 processor running at 166MHz or 233MHz. It
is a baby-AT size, and runs from a standard PC power supply. It has
5 ISA slots and 3 PCI slots (one pair are a shared slot). There are
2 versions, with either PS/2 or large DIN connectors for the
keyboard.
config ALPHA_EV4
bool
depends on ALPHA_JENSEN || (ALPHA_SABLE && !ALPHA_GAMMA) || ALPHA_LYNX || ALPHA_NORITAKE && !ALPHA_PRIMO || ALPHA_MIKASA && !ALPHA_PRIMO || ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P_CH || ALPHA_XL || ALPHA_NONAME || ALPHA_EB66 || ALPHA_EB66P || ALPHA_P2K
default y if !ALPHA_LYNX
config ALPHA_LCA
bool
depends on ALPHA_NONAME || ALPHA_EB66 || ALPHA_EB66P || ALPHA_P2K
default y
config ALPHA_APECS
bool
depends on !ALPHA_PRIMO && (ALPHA_NORITAKE || ALPHA_MIKASA) || ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P_CH || ALPHA_XL
default y
config ALPHA_EB64P
bool
depends on ALPHA_CABRIOLET || ALPHA_EB64P_CH
default y
help
Uses 21064 or 21064A and APECs. Has ISA and PCI expansion (3 ISA,
2 PCI, one pair are on a shared slot). Supports 36-bit DRAM SIMs.
ISA bus generated by Intel SaturnI/O PCI-ISA bridge. On-board SCSI
(NCR 810 on PCI) Ethernet (Digital 21040), KBD, MOUSE (PS2 style),
SuperI/O (2S, 1P, FD), RTC/NVRAM. Boot ROM is EPROM. PC-AT size.
Runs from standard PC power supply.
config ALPHA_EV5
bool "EV5 CPU(s) (model 5/xxx)?" if ALPHA_LYNX
default y if ALPHA_RX164 || ALPHA_RAWHIDE || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_SABLE && ALPHA_GAMMA || ALPHA_NORITAKE && ALPHA_PRIMO || ALPHA_MIKASA && ALPHA_PRIMO || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR
config ALPHA_EV4
bool
default y if ALPHA_LYNX && !ALPHA_EV5
config ALPHA_CIA
bool
depends on ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_NORITAKE && ALPHA_PRIMO || ALPHA_MIKASA && ALPHA_PRIMO || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR
default y
config ALPHA_EV56
bool "EV56 CPU (speed >= 366MHz)?" if ALPHA_ALCOR
default y if ALPHA_RX164 || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_PC164 || ALPHA_TAKARA
config ALPHA_EV56
prompt "EV56 CPU (speed >= 333MHz)?"
depends on ALPHA_NORITAKE || ALPHA_PRIMO
config ALPHA_EV56
prompt "EV56 CPU (speed >= 400MHz)?"
depends on ALPHA_RAWHIDE
config ALPHA_PRIMO
bool "EV5 CPU daughtercard (model 5/xxx)?"
depends on ALPHA_NORITAKE || ALPHA_MIKASA
help
Say Y if you have an AS 1000 5/xxx or an AS 1000A 5/xxx.
config ALPHA_GAMMA
bool "EV5 CPU(s) (model 5/xxx)?"
depends on ALPHA_SABLE
help
Say Y if you have an AS 2000 5/xxx or an AS 2100 5/xxx.
config ALPHA_GAMMA
bool
depends on ALPHA_LYNX
default y
config ALPHA_T2
bool
depends on ALPHA_SABLE || ALPHA_LYNX
default y
config ALPHA_PYXIS
bool
depends on ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN
default y
config ALPHA_EV6
bool
depends on ALPHA_NAUTILUS || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_DP264 || ALPHA_EIGER || ALPHA_MARVEL
default y
config ALPHA_TSUNAMI
bool
depends on ALPHA_SHARK || ALPHA_DP264 || ALPHA_EIGER
default y
config ALPHA_EV67
bool "EV67 (or later) CPU (speed > 600MHz)?" if ALPHA_DP264 || ALPHA_EIGER
default y if ALPHA_NAUTILUS || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_MARVEL
help
Is this a machine based on the EV67 core? If in doubt, select N here
and the machine will be treated as an EV6.
config ALPHA_MCPCIA
bool
depends on ALPHA_RAWHIDE
default y
config ALPHA_POLARIS
bool
depends on ALPHA_RX164
default y
config ALPHA_IRONGATE
bool
depends on ALPHA_NAUTILUS
default y
config GENERIC_HWEIGHT
bool
default y if !ALPHA_EV67
config ALPHA_AVANTI
bool
depends on ALPHA_XL || ALPHA_AVANTI_CH
default y
help
Avanti AS 200, AS 205, AS 250, AS 255, AS 300, and AS 400-based
Alphas. Info at
<http://www.unix-ag.org/Linux-Alpha/Architectures/Avanti.html>.
config ALPHA_BROKEN_IRQ_MASK
bool
depends on ALPHA_GENERIC || ALPHA_PC164
default y
config VGA_HOSE
bool
depends on VGA_CONSOLE && (ALPHA_GENERIC || ALPHA_TITAN || ALPHA_MARVEL || ALPHA_TSUNAMI)
default y
help
Support VGA on an arbitrary hose; needed for several platforms
which always have multiple hoses, and whose consoles support it.
config ALPHA_QEMU
bool "Run under QEMU emulation"
depends on !ALPHA_GENERIC
---help---
Assume the presence of special features supported by QEMU PALcode
that reduce the overhead of system emulation.
Generic kernels will auto-detect QEMU. But when building a
system-specific kernel, the assumption is that we want to
elimiate as many runtime tests as possible.
If unsure, say N.
config ALPHA_SRM
bool "Use SRM as bootloader" if ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_NAUTILUS || ALPHA_NONAME
depends on TTY
default y if ALPHA_JENSEN || ALPHA_MIKASA || ALPHA_SABLE || ALPHA_LYNX || ALPHA_NORITAKE || ALPHA_DP264 || ALPHA_RAWHIDE || ALPHA_EIGER || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_MARVEL
---help---
There are two different types of booting firmware on Alphas: SRM,
which is command line driven, and ARC, which uses menus and arrow
keys. Details about the Linux/Alpha booting process are contained in
the Linux/Alpha FAQ, accessible on the WWW from
<http://www.alphalinux.org/>.
The usual way to load Linux on an Alpha machine is to use MILO
(a bootloader that lets you pass command line parameters to the
kernel just like lilo does for the x86 architecture) which can be
loaded either from ARC or can be installed directly as a permanent
firmware replacement from floppy (which requires changing a certain
jumper on the motherboard). If you want to do either of these, say N
here. If MILO doesn't work on your system (true for Jensen
motherboards), you can bypass it altogether and boot Linux directly
from an SRM console; say Y here in order to do that. Note that you
won't be able to boot from an IDE disk using SRM.
If unsure, say N.
config EISA
bool
depends on ALPHA_GENERIC || ALPHA_JENSEN || ALPHA_ALCOR || ALPHA_MIKASA || ALPHA_SABLE || ALPHA_LYNX || ALPHA_NORITAKE || ALPHA_RAWHIDE
default y
config ARCH_MAY_HAVE_PC_FDC
def_bool y
config SMP
bool "Symmetric multi-processing support"
depends on ALPHA_SABLE || ALPHA_LYNX || ALPHA_RAWHIDE || ALPHA_DP264 || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_GENERIC || ALPHA_SHARK || ALPHA_MARVEL
---help---
This enables support for systems with more than one CPU. If you have
a system with only one CPU, say N. If you have a system with more
than one CPU, say Y.
If you say N here, the kernel will run on uni- and multiprocessor
machines, but will use only one CPU of a multiprocessor machine. If
you say Y here, the kernel will run on many, but not all,
uniprocessor machines. On a uniprocessor machine, the kernel
will run faster if you say N here.
See also the SMP-HOWTO available at
<http://www.tldp.org/docs.html#howto>.
If you don't know what to do here, say N.
config HAVE_DEC_LOCK
bool
depends on SMP
default y
config NR_CPUS
int "Maximum number of CPUs (2-32)"
range 2 32
depends on SMP
default "32" if ALPHA_GENERIC || ALPHA_MARVEL
default "4" if !ALPHA_GENERIC && !ALPHA_MARVEL
help
MARVEL support can handle a maximum of 32 CPUs, all the others
with working support have a maximum of 4 CPUs.
config ARCH_DISCONTIGMEM_ENABLE
bool "Discontiguous Memory Support"
help
Say Y to support efficient handling of discontiguous physical memory,
for architectures which are either NUMA (Non-Uniform Memory Access)
or have huge holes in the physical address space for other reasons.
See <file:Documentation/vm/numa> for more.
source "mm/Kconfig"
config NUMA
bool "NUMA Support (EXPERIMENTAL)"
depends on DISCONTIGMEM && BROKEN
help
Say Y to compile the kernel to support NUMA (Non-Uniform Memory
Access). This option is for configuring high-end multiprocessor
server machines. If in doubt, say N.
config ALPHA_WTINT
bool "Use WTINT" if ALPHA_SRM || ALPHA_GENERIC
default y if ALPHA_QEMU
default n if ALPHA_EV5 || ALPHA_EV56 || (ALPHA_EV4 && !ALPHA_LCA)
default n if !ALPHA_SRM && !ALPHA_GENERIC
default y if SMP
---help---
The Wait for Interrupt (WTINT) PALcall attempts to place the CPU
to sleep until the next interrupt. This may reduce the power
consumed, and the heat produced by the computer. However, it has
the side effect of making the cycle counter unreliable as a timing
device across the sleep.
For emulation under QEMU, definitely say Y here, as we have other
mechanisms for measuring time than the cycle counter.
For EV4 (but not LCA), EV5 and EV56 systems, or for systems running
MILO, sleep mode is not supported so you might as well say N here.
For SMP systems we cannot use the cycle counter for timing anyway,
so you might as well say Y here.
If unsure, say N.
config NODES_SHIFT
int
default "7"
depends on NEED_MULTIPLE_NODES
# LARGE_VMALLOC is racy, if you *really* need it then fix it first
config ALPHA_LARGE_VMALLOC
bool
---help---
Process creation and other aspects of virtual memory management can
be streamlined if we restrict the kernel to one PGD for all vmalloc
allocations. This equates to about 8GB.
Under normal circumstances, this is so far and above what is needed
as to be laughable. However, there are certain applications (such
as benchmark-grade in-kernel web serving) that can make use of as
much vmalloc space as is available.
Say N unless you know you need gobs and gobs of vmalloc space.
config VERBOSE_MCHECK
bool "Verbose Machine Checks"
config VERBOSE_MCHECK_ON
int "Verbose Printing Mode (0=off, 1=on, 2=all)"
depends on VERBOSE_MCHECK
default 1
---help---
This option allows the default printing mode to be set, and then
possibly overridden by a boot command argument.
For example, if one wanted the option of printing verbose
machine checks, but wanted the default to be as if verbose
machine check printing was turned off, then one would choose
the printing mode to be 0. Then, upon reboot, one could add
the boot command line "verbose_mcheck=1" to get the normal
verbose machine check printing, or "verbose_mcheck=2" to get
the maximum information available.
Take the default (1) unless you want more control or more info.
choice
prompt "Timer interrupt frequency (HZ)?"
default HZ_128 if ALPHA_QEMU
default HZ_1200 if ALPHA_RAWHIDE
default HZ_1024
---help---
The frequency at which timer interrupts occur. A high frequency
minimizes latency, whereas a low frequency minimizes overhead of
process accounting. The later effect is especially significant
when being run under QEMU.
Note that some Alpha hardware cannot change the interrupt frequency
of the timer. If unsure, say 1024 (or 1200 for Rawhide).
config HZ_32
bool "32 Hz"
config HZ_64
bool "64 Hz"
config HZ_128
bool "128 Hz"
config HZ_256
bool "256 Hz"
config HZ_1024
bool "1024 Hz"
config HZ_1200
bool "1200 Hz"
endchoice
config HZ
int
default 32 if HZ_32
default 64 if HZ_64
default 128 if HZ_128
default 256 if HZ_256
default 1200 if HZ_1200
default 1024
source "drivers/pci/Kconfig"
source "drivers/eisa/Kconfig"
source "drivers/pcmcia/Kconfig"
config SRM_ENV
tristate "SRM environment through procfs"
depends on PROC_FS
---help---
If you enable this option, a subdirectory inside /proc called
/proc/srm_environment will give you access to the all important
SRM environment variables (those which have a name) and also
to all others (by their internal number).
SRM is something like a BIOS for Alpha machines. There are some
other such BIOSes, like AlphaBIOS, which this driver cannot
support (hey, that's not SRM!).
Despite the fact that this driver doesn't work on all Alphas (but
only on those which have SRM as their firmware), it's save to
build it even if your particular machine doesn't know about SRM
(or if you intend to compile a generic kernel). It will simply
not create those subdirectory in /proc (and give you some warning,
of course).
This driver is also available as a module and will be called
srm_env then.
source "fs/Kconfig.binfmt"
endmenu
source "net/Kconfig"
source "drivers/Kconfig"
source "fs/Kconfig"
source "arch/alpha/Kconfig.debug"
# DUMMY_CONSOLE may be defined in drivers/video/console/Kconfig
# but we also need it if VGA_HOSE is set
config DUMMY_CONSOLE
bool
depends on VGA_HOSE
default y
source "security/Kconfig"
source "crypto/Kconfig"
source "lib/Kconfig"
Reference in New Issue View Git Blame Copy Permalink