linux_dsm_epyc7002/drivers/gpu/drm/bridge/adv7511
Archit Taneja 62b2f026cd drm/bridge: adv7533: Change number of DSI lanes dynamically
Lower modes on ADV7533 require lower number of DSI lanes for correct
operation. If ADV7533 is being used with 4 DSI lanes, then switch the
lanes to 3 when the target mode's pixel clock is less than 80 Mhz.

Based on patch by Andy Green <andy.green@linaro.org>

Signed-off-by: Archit Taneja <architt@codeaurora.org>
2016-07-13 14:24:37 +05:30
..
adv7511_drv.c drm/bridge: adv7533: Change number of DSI lanes dynamically 2016-07-13 14:24:37 +05:30
adv7511.h drm/bridge: adv7533: Change number of DSI lanes dynamically 2016-07-13 14:24:37 +05:30
adv7533.c drm/bridge: adv7533: Change number of DSI lanes dynamically 2016-07-13 14:24:37 +05:30
Kconfig drm/bridge: adv7533: Create a MIPI DSI device 2016-07-13 14:24:37 +05:30
Makefile drm/bridge: adv7533: Initial support for ADV7533 2016-07-13 14:24:36 +05:30