mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-06 18:06:40 +07:00
cd354f1ae7
After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
151 lines
4.3 KiB
C
151 lines
4.3 KiB
C
/*
|
|
* PL-2301/2302 USB host-to-host link cables
|
|
* Copyright (C) 2000-2005 by David Brownell
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
|
|
// #define DEBUG // error path messages, extra info
|
|
// #define VERBOSE // more; success messages
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/usb.h>
|
|
|
|
#include "usbnet.h"
|
|
|
|
|
|
/*
|
|
* Prolific PL-2301/PL-2302 driver ... http://www.prolifictech.com
|
|
*
|
|
* The protocol and handshaking used here should be bug-compatible
|
|
* with the Linux 2.2 "plusb" driver, by Deti Fliegl.
|
|
*
|
|
* HEADS UP: this handshaking isn't all that robust. This driver
|
|
* gets confused easily if you unplug one end of the cable then
|
|
* try to connect it again; you'll need to restart both ends. The
|
|
* "naplink" software (used by some PlayStation/2 deveopers) does
|
|
* the handshaking much better! Also, sometimes this hardware
|
|
* seems to get wedged under load. Prolific docs are weak, and
|
|
* don't identify differences between PL2301 and PL2302, much less
|
|
* anything to explain the different PL2302 versions observed.
|
|
*/
|
|
|
|
/*
|
|
* Bits 0-4 can be used for software handshaking; they're set from
|
|
* one end, cleared from the other, "read" with the interrupt byte.
|
|
*/
|
|
#define PL_S_EN (1<<7) /* (feature only) suspend enable */
|
|
/* reserved bit -- rx ready (6) ? */
|
|
#define PL_TX_READY (1<<5) /* (interrupt only) transmit ready */
|
|
#define PL_RESET_OUT (1<<4) /* reset output pipe */
|
|
#define PL_RESET_IN (1<<3) /* reset input pipe */
|
|
#define PL_TX_C (1<<2) /* transmission complete */
|
|
#define PL_TX_REQ (1<<1) /* transmission received */
|
|
#define PL_PEER_E (1<<0) /* peer exists */
|
|
|
|
static inline int
|
|
pl_vendor_req(struct usbnet *dev, u8 req, u8 val, u8 index)
|
|
{
|
|
return usb_control_msg(dev->udev,
|
|
usb_rcvctrlpipe(dev->udev, 0),
|
|
req,
|
|
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
|
|
val, index,
|
|
NULL, 0,
|
|
USB_CTRL_GET_TIMEOUT);
|
|
}
|
|
|
|
static inline int
|
|
pl_clear_QuickLink_features(struct usbnet *dev, int val)
|
|
{
|
|
return pl_vendor_req(dev, 1, (u8) val, 0);
|
|
}
|
|
|
|
static inline int
|
|
pl_set_QuickLink_features(struct usbnet *dev, int val)
|
|
{
|
|
return pl_vendor_req(dev, 3, (u8) val, 0);
|
|
}
|
|
|
|
static int pl_reset(struct usbnet *dev)
|
|
{
|
|
/* some units seem to need this reset, others reject it utterly.
|
|
* FIXME be more like "naplink" or windows drivers.
|
|
*/
|
|
(void) pl_set_QuickLink_features(dev,
|
|
PL_S_EN|PL_RESET_OUT|PL_RESET_IN|PL_PEER_E);
|
|
return 0;
|
|
}
|
|
|
|
static const struct driver_info prolific_info = {
|
|
.description = "Prolific PL-2301/PL-2302",
|
|
.flags = FLAG_NO_SETINT,
|
|
/* some PL-2302 versions seem to fail usb_set_interface() */
|
|
.reset = pl_reset,
|
|
};
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* Proilific's name won't normally be on the cables, and
|
|
* may not be on the device.
|
|
*/
|
|
|
|
static const struct usb_device_id products [] = {
|
|
|
|
{
|
|
USB_DEVICE(0x067b, 0x0000), // PL-2301
|
|
.driver_info = (unsigned long) &prolific_info,
|
|
}, {
|
|
USB_DEVICE(0x067b, 0x0001), // PL-2302
|
|
.driver_info = (unsigned long) &prolific_info,
|
|
},
|
|
|
|
{ }, // END
|
|
};
|
|
MODULE_DEVICE_TABLE(usb, products);
|
|
|
|
static struct usb_driver plusb_driver = {
|
|
.name = "plusb",
|
|
.id_table = products,
|
|
.probe = usbnet_probe,
|
|
.disconnect = usbnet_disconnect,
|
|
.suspend = usbnet_suspend,
|
|
.resume = usbnet_resume,
|
|
};
|
|
|
|
static int __init plusb_init(void)
|
|
{
|
|
return usb_register(&plusb_driver);
|
|
}
|
|
module_init(plusb_init);
|
|
|
|
static void __exit plusb_exit(void)
|
|
{
|
|
usb_deregister(&plusb_driver);
|
|
}
|
|
module_exit(plusb_exit);
|
|
|
|
MODULE_AUTHOR("David Brownell");
|
|
MODULE_DESCRIPTION("Prolific PL-2301/2302 USB Host to Host Link Driver");
|
|
MODULE_LICENSE("GPL");
|