linux_dsm_epyc7002/drivers/spi/davinci_spi.c
Brian Niebuhr d3f7141cbf spi: davinci: do not use temporary buffer if no transmit data provided
Remove usage of temporary buffer when no transmit data is provided.
Instead, use the transmit register itself as the source of data.

By choosing the transmit register itself as the source of data, this
patch helps remove unnecessary accesses to memory when no real data
is being transmitted.

Signed-off-by: Brian Niebuhr <bniebuhr@efjohnson.com>
Tested-By: Michael Williamson <michael.williamson@criticallink.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2010-11-18 18:38:33 +05:30

1083 lines
29 KiB
C

/*
* Copyright (C) 2009 Texas Instruments.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_bitbang.h>
#include <linux/slab.h>
#include <mach/spi.h>
#include <mach/edma.h>
#define SPI_NO_RESOURCE ((resource_size_t)-1)
#define SPI_MAX_CHIPSELECT 2
#define CS_DEFAULT 0xFF
#define SPIFMT_PHASE_MASK BIT(16)
#define SPIFMT_POLARITY_MASK BIT(17)
#define SPIFMT_DISTIMER_MASK BIT(18)
#define SPIFMT_SHIFTDIR_MASK BIT(20)
#define SPIFMT_WAITENA_MASK BIT(21)
#define SPIFMT_PARITYENA_MASK BIT(22)
#define SPIFMT_ODD_PARITY_MASK BIT(23)
#define SPIFMT_WDELAY_MASK 0x3f000000u
#define SPIFMT_WDELAY_SHIFT 24
#define SPIFMT_PRESCALE_SHIFT 8
/* SPIPC0 */
#define SPIPC0_DIFUN_MASK BIT(11) /* MISO */
#define SPIPC0_DOFUN_MASK BIT(10) /* MOSI */
#define SPIPC0_CLKFUN_MASK BIT(9) /* CLK */
#define SPIPC0_SPIENA_MASK BIT(8) /* nREADY */
#define SPIINT_MASKALL 0x0101035F
#define SPIINT_MASKINT 0x0000015F
#define SPI_INTLVL_1 0x000001FF
#define SPI_INTLVL_0 0x00000000
/* SPIDAT1 (upper 16 bit defines) */
#define SPIDAT1_CSHOLD_MASK BIT(12)
/* SPIGCR1 */
#define SPIGCR1_CLKMOD_MASK BIT(1)
#define SPIGCR1_MASTER_MASK BIT(0)
#define SPIGCR1_LOOPBACK_MASK BIT(16)
#define SPIGCR1_SPIENA_MASK BIT(24)
/* SPIBUF */
#define SPIBUF_TXFULL_MASK BIT(29)
#define SPIBUF_RXEMPTY_MASK BIT(31)
/* SPIDELAY */
#define SPIDELAY_C2TDELAY_SHIFT 24
#define SPIDELAY_C2TDELAY_MASK (0xFF << SPIDELAY_C2TDELAY_SHIFT)
#define SPIDELAY_T2CDELAY_SHIFT 16
#define SPIDELAY_T2CDELAY_MASK (0xFF << SPIDELAY_T2CDELAY_SHIFT)
#define SPIDELAY_T2EDELAY_SHIFT 8
#define SPIDELAY_T2EDELAY_MASK (0xFF << SPIDELAY_T2EDELAY_SHIFT)
#define SPIDELAY_C2EDELAY_SHIFT 0
#define SPIDELAY_C2EDELAY_MASK 0xFF
/* Error Masks */
#define SPIFLG_DLEN_ERR_MASK BIT(0)
#define SPIFLG_TIMEOUT_MASK BIT(1)
#define SPIFLG_PARERR_MASK BIT(2)
#define SPIFLG_DESYNC_MASK BIT(3)
#define SPIFLG_BITERR_MASK BIT(4)
#define SPIFLG_OVRRUN_MASK BIT(6)
#define SPIFLG_BUF_INIT_ACTIVE_MASK BIT(24)
#define SPIFLG_ERROR_MASK (SPIFLG_DLEN_ERR_MASK \
| SPIFLG_TIMEOUT_MASK | SPIFLG_PARERR_MASK \
| SPIFLG_DESYNC_MASK | SPIFLG_BITERR_MASK \
| SPIFLG_OVRRUN_MASK)
#define SPIINT_DMA_REQ_EN BIT(16)
/* SPI Controller registers */
#define SPIGCR0 0x00
#define SPIGCR1 0x04
#define SPIINT 0x08
#define SPILVL 0x0c
#define SPIFLG 0x10
#define SPIPC0 0x14
#define SPIDAT1 0x3c
#define SPIBUF 0x40
#define SPIDELAY 0x48
#define SPIDEF 0x4c
#define SPIFMT0 0x50
/* We have 2 DMA channels per CS, one for RX and one for TX */
struct davinci_spi_dma {
int dma_tx_channel;
int dma_rx_channel;
int dma_tx_sync_dev;
int dma_rx_sync_dev;
enum dma_event_q eventq;
struct completion dma_tx_completion;
struct completion dma_rx_completion;
};
/* SPI Controller driver's private data. */
struct davinci_spi {
struct spi_bitbang bitbang;
struct clk *clk;
u8 version;
resource_size_t pbase;
void __iomem *base;
size_t region_size;
u32 irq;
struct completion done;
const void *tx;
void *rx;
int rcount;
int wcount;
struct davinci_spi_dma dma_channels;
struct davinci_spi_platform_data *pdata;
void (*get_rx)(u32 rx_data, struct davinci_spi *);
u32 (*get_tx)(struct davinci_spi *);
u8 bytes_per_word[SPI_MAX_CHIPSELECT];
};
static struct davinci_spi_config davinci_spi_default_cfg;
static unsigned use_dma;
static void davinci_spi_rx_buf_u8(u32 data, struct davinci_spi *davinci_spi)
{
if (davinci_spi->rx) {
u8 *rx = davinci_spi->rx;
*rx++ = (u8)data;
davinci_spi->rx = rx;
}
}
static void davinci_spi_rx_buf_u16(u32 data, struct davinci_spi *davinci_spi)
{
if (davinci_spi->rx) {
u16 *rx = davinci_spi->rx;
*rx++ = (u16)data;
davinci_spi->rx = rx;
}
}
static u32 davinci_spi_tx_buf_u8(struct davinci_spi *davinci_spi)
{
u32 data = 0;
if (davinci_spi->tx) {
const u8 *tx = davinci_spi->tx;
data = *tx++;
davinci_spi->tx = tx;
}
return data;
}
static u32 davinci_spi_tx_buf_u16(struct davinci_spi *davinci_spi)
{
u32 data = 0;
if (davinci_spi->tx) {
const u16 *tx = davinci_spi->tx;
data = *tx++;
davinci_spi->tx = tx;
}
return data;
}
static inline void set_io_bits(void __iomem *addr, u32 bits)
{
u32 v = ioread32(addr);
v |= bits;
iowrite32(v, addr);
}
static inline void clear_io_bits(void __iomem *addr, u32 bits)
{
u32 v = ioread32(addr);
v &= ~bits;
iowrite32(v, addr);
}
static void davinci_spi_set_dma_req(const struct spi_device *spi, int enable)
{
struct davinci_spi *davinci_spi = spi_master_get_devdata(spi->master);
if (enable)
set_io_bits(davinci_spi->base + SPIINT, SPIINT_DMA_REQ_EN);
else
clear_io_bits(davinci_spi->base + SPIINT, SPIINT_DMA_REQ_EN);
}
/*
* Interface to control the chip select signal
*/
static void davinci_spi_chipselect(struct spi_device *spi, int value)
{
struct davinci_spi *davinci_spi;
struct davinci_spi_platform_data *pdata;
u8 chip_sel = spi->chip_select;
u16 spidat1_cfg = CS_DEFAULT;
bool gpio_chipsel = false;
davinci_spi = spi_master_get_devdata(spi->master);
pdata = davinci_spi->pdata;
if (pdata->chip_sel && chip_sel < pdata->num_chipselect &&
pdata->chip_sel[chip_sel] != SPI_INTERN_CS)
gpio_chipsel = true;
/*
* Board specific chip select logic decides the polarity and cs
* line for the controller
*/
if (gpio_chipsel) {
if (value == BITBANG_CS_ACTIVE)
gpio_set_value(pdata->chip_sel[chip_sel], 0);
else
gpio_set_value(pdata->chip_sel[chip_sel], 1);
} else {
if (value == BITBANG_CS_ACTIVE) {
spidat1_cfg |= SPIDAT1_CSHOLD_MASK;
spidat1_cfg &= ~(0x1 << chip_sel);
}
iowrite16(spidat1_cfg, davinci_spi->base + SPIDAT1 + 2);
}
}
/**
* davinci_spi_get_prescale - Calculates the correct prescale value
* @maxspeed_hz: the maximum rate the SPI clock can run at
*
* This function calculates the prescale value that generates a clock rate
* less than or equal to the specified maximum.
*
* Returns: calculated prescale - 1 for easy programming into SPI registers
* or negative error number if valid prescalar cannot be updated.
*/
static inline int davinci_spi_get_prescale(struct davinci_spi *davinci_spi,
u32 max_speed_hz)
{
int ret;
ret = DIV_ROUND_UP(clk_get_rate(davinci_spi->clk), max_speed_hz);
if (ret < 3 || ret > 256)
return -EINVAL;
return ret - 1;
}
/**
* davinci_spi_setup_transfer - This functions will determine transfer method
* @spi: spi device on which data transfer to be done
* @t: spi transfer in which transfer info is filled
*
* This function determines data transfer method (8/16/32 bit transfer).
* It will also set the SPI Clock Control register according to
* SPI slave device freq.
*/
static int davinci_spi_setup_transfer(struct spi_device *spi,
struct spi_transfer *t)
{
struct davinci_spi *davinci_spi;
struct davinci_spi_config *spicfg;
u8 bits_per_word = 0;
u32 hz = 0, spifmt = 0, prescale = 0;
davinci_spi = spi_master_get_devdata(spi->master);
spicfg = (struct davinci_spi_config *)spi->controller_data;
if (!spicfg)
spicfg = &davinci_spi_default_cfg;
if (t) {
bits_per_word = t->bits_per_word;
hz = t->speed_hz;
}
/* if bits_per_word is not set then set it default */
if (!bits_per_word)
bits_per_word = spi->bits_per_word;
/*
* Assign function pointer to appropriate transfer method
* 8bit, 16bit or 32bit transfer
*/
if (bits_per_word <= 8 && bits_per_word >= 2) {
davinci_spi->get_rx = davinci_spi_rx_buf_u8;
davinci_spi->get_tx = davinci_spi_tx_buf_u8;
davinci_spi->bytes_per_word[spi->chip_select] = 1;
} else if (bits_per_word <= 16 && bits_per_word >= 2) {
davinci_spi->get_rx = davinci_spi_rx_buf_u16;
davinci_spi->get_tx = davinci_spi_tx_buf_u16;
davinci_spi->bytes_per_word[spi->chip_select] = 2;
} else
return -EINVAL;
if (!hz)
hz = spi->max_speed_hz;
/* Set up SPIFMTn register, unique to this chipselect. */
prescale = davinci_spi_get_prescale(davinci_spi, hz);
if (prescale < 0)
return prescale;
spifmt = (prescale << SPIFMT_PRESCALE_SHIFT) | (bits_per_word & 0x1f);
if (spi->mode & SPI_LSB_FIRST)
spifmt |= SPIFMT_SHIFTDIR_MASK;
if (spi->mode & SPI_CPOL)
spifmt |= SPIFMT_POLARITY_MASK;
if (!(spi->mode & SPI_CPHA))
spifmt |= SPIFMT_PHASE_MASK;
/*
* Version 1 hardware supports two basic SPI modes:
* - Standard SPI mode uses 4 pins, with chipselect
* - 3 pin SPI is a 4 pin variant without CS (SPI_NO_CS)
* (distinct from SPI_3WIRE, with just one data wire;
* or similar variants without MOSI or without MISO)
*
* Version 2 hardware supports an optional handshaking signal,
* so it can support two more modes:
* - 5 pin SPI variant is standard SPI plus SPI_READY
* - 4 pin with enable is (SPI_READY | SPI_NO_CS)
*/
if (davinci_spi->version == SPI_VERSION_2) {
u32 delay = 0;
spifmt |= ((spicfg->wdelay << SPIFMT_WDELAY_SHIFT)
& SPIFMT_WDELAY_MASK);
if (spicfg->odd_parity)
spifmt |= SPIFMT_ODD_PARITY_MASK;
if (spicfg->parity_enable)
spifmt |= SPIFMT_PARITYENA_MASK;
if (spicfg->timer_disable) {
spifmt |= SPIFMT_DISTIMER_MASK;
} else {
delay |= (spicfg->c2tdelay << SPIDELAY_C2TDELAY_SHIFT)
& SPIDELAY_C2TDELAY_MASK;
delay |= (spicfg->t2cdelay << SPIDELAY_T2CDELAY_SHIFT)
& SPIDELAY_T2CDELAY_MASK;
}
if (spi->mode & SPI_READY) {
spifmt |= SPIFMT_WAITENA_MASK;
delay |= (spicfg->t2edelay << SPIDELAY_T2EDELAY_SHIFT)
& SPIDELAY_T2EDELAY_MASK;
delay |= (spicfg->c2edelay << SPIDELAY_C2EDELAY_SHIFT)
& SPIDELAY_C2EDELAY_MASK;
}
iowrite32(delay, davinci_spi->base + SPIDELAY);
}
iowrite32(spifmt, davinci_spi->base + SPIFMT0);
return 0;
}
static void davinci_spi_dma_rx_callback(unsigned lch, u16 ch_status, void *data)
{
struct spi_device *spi = (struct spi_device *)data;
struct davinci_spi *davinci_spi;
struct davinci_spi_dma *davinci_spi_dma;
davinci_spi = spi_master_get_devdata(spi->master);
davinci_spi_dma = &davinci_spi->dma_channels;
if (ch_status == DMA_COMPLETE)
edma_stop(davinci_spi_dma->dma_rx_channel);
else
edma_clean_channel(davinci_spi_dma->dma_rx_channel);
complete(&davinci_spi_dma->dma_rx_completion);
/* We must disable the DMA RX request */
davinci_spi_set_dma_req(spi, 0);
}
static void davinci_spi_dma_tx_callback(unsigned lch, u16 ch_status, void *data)
{
struct spi_device *spi = (struct spi_device *)data;
struct davinci_spi *davinci_spi;
struct davinci_spi_dma *davinci_spi_dma;
davinci_spi = spi_master_get_devdata(spi->master);
davinci_spi_dma = &davinci_spi->dma_channels;
if (ch_status == DMA_COMPLETE)
edma_stop(davinci_spi_dma->dma_tx_channel);
else
edma_clean_channel(davinci_spi_dma->dma_tx_channel);
complete(&davinci_spi_dma->dma_tx_completion);
/* We must disable the DMA TX request */
davinci_spi_set_dma_req(spi, 0);
}
static int davinci_spi_request_dma(struct spi_device *spi)
{
struct davinci_spi *davinci_spi;
struct davinci_spi_dma *davinci_spi_dma;
struct device *sdev;
int r;
davinci_spi = spi_master_get_devdata(spi->master);
davinci_spi_dma = &davinci_spi->dma_channels;
sdev = davinci_spi->bitbang.master->dev.parent;
r = edma_alloc_channel(davinci_spi_dma->dma_rx_sync_dev,
davinci_spi_dma_rx_callback, spi,
davinci_spi_dma->eventq);
if (r < 0) {
dev_dbg(sdev, "Unable to request DMA channel for SPI RX\n");
return -EAGAIN;
}
davinci_spi_dma->dma_rx_channel = r;
r = edma_alloc_channel(davinci_spi_dma->dma_tx_sync_dev,
davinci_spi_dma_tx_callback, spi,
davinci_spi_dma->eventq);
if (r < 0) {
edma_free_channel(davinci_spi_dma->dma_rx_channel);
davinci_spi_dma->dma_rx_channel = -1;
dev_dbg(sdev, "Unable to request DMA channel for SPI TX\n");
return -EAGAIN;
}
davinci_spi_dma->dma_tx_channel = r;
return 0;
}
/**
* davinci_spi_setup - This functions will set default transfer method
* @spi: spi device on which data transfer to be done
*
* This functions sets the default transfer method.
*/
static int davinci_spi_setup(struct spi_device *spi)
{
int retval = 0;
struct davinci_spi *davinci_spi;
struct davinci_spi_dma *davinci_spi_dma;
struct davinci_spi_platform_data *pdata;
davinci_spi = spi_master_get_devdata(spi->master);
pdata = davinci_spi->pdata;
/* if bits per word length is zero then set it default 8 */
if (!spi->bits_per_word)
spi->bits_per_word = 8;
if (!(spi->mode & SPI_NO_CS)) {
if ((pdata->chip_sel == NULL) ||
(pdata->chip_sel[spi->chip_select] == SPI_INTERN_CS))
set_io_bits(davinci_spi->base + SPIPC0,
1 << spi->chip_select);
}
if (spi->mode & SPI_READY)
set_io_bits(davinci_spi->base + SPIPC0, SPIPC0_SPIENA_MASK);
if (spi->mode & SPI_LOOP)
set_io_bits(davinci_spi->base + SPIGCR1,
SPIGCR1_LOOPBACK_MASK);
else
clear_io_bits(davinci_spi->base + SPIGCR1,
SPIGCR1_LOOPBACK_MASK);
if (use_dma) {
davinci_spi_dma = &davinci_spi->dma_channels;
if ((davinci_spi_dma->dma_rx_channel == -1) ||
(davinci_spi_dma->dma_tx_channel == -1))
retval = davinci_spi_request_dma(spi);
}
return retval;
}
static void davinci_spi_cleanup(struct spi_device *spi)
{
if (use_dma) {
struct davinci_spi *davinci_spi =
spi_master_get_devdata(spi->master);
struct davinci_spi_dma *davinci_spi_dma =
&davinci_spi->dma_channels;
if ((davinci_spi_dma->dma_rx_channel != -1)
&& (davinci_spi_dma->dma_tx_channel != -1)) {
edma_free_channel(davinci_spi_dma->dma_tx_channel);
edma_free_channel(davinci_spi_dma->dma_rx_channel);
}
}
}
static int davinci_spi_check_error(struct davinci_spi *davinci_spi,
int int_status)
{
struct device *sdev = davinci_spi->bitbang.master->dev.parent;
if (int_status & SPIFLG_TIMEOUT_MASK) {
dev_dbg(sdev, "SPI Time-out Error\n");
return -ETIMEDOUT;
}
if (int_status & SPIFLG_DESYNC_MASK) {
dev_dbg(sdev, "SPI Desynchronization Error\n");
return -EIO;
}
if (int_status & SPIFLG_BITERR_MASK) {
dev_dbg(sdev, "SPI Bit error\n");
return -EIO;
}
if (davinci_spi->version == SPI_VERSION_2) {
if (int_status & SPIFLG_DLEN_ERR_MASK) {
dev_dbg(sdev, "SPI Data Length Error\n");
return -EIO;
}
if (int_status & SPIFLG_PARERR_MASK) {
dev_dbg(sdev, "SPI Parity Error\n");
return -EIO;
}
if (int_status & SPIFLG_OVRRUN_MASK) {
dev_dbg(sdev, "SPI Data Overrun error\n");
return -EIO;
}
if (int_status & SPIFLG_BUF_INIT_ACTIVE_MASK) {
dev_dbg(sdev, "SPI Buffer Init Active\n");
return -EBUSY;
}
}
return 0;
}
/**
* davinci_spi_process_events - check for and handle any SPI controller events
* @davinci_spi: the controller data
*
* This function will check the SPIFLG register and handle any events that are
* detected there
*/
static int davinci_spi_process_events(struct davinci_spi *davinci_spi)
{
u32 buf, status, errors = 0, data1_reg_val;
buf = ioread32(davinci_spi->base + SPIBUF);
if (davinci_spi->rcount > 0 && !(buf & SPIBUF_RXEMPTY_MASK)) {
davinci_spi->get_rx(buf & 0xFFFF, davinci_spi);
davinci_spi->rcount--;
}
status = ioread32(davinci_spi->base + SPIFLG);
if (unlikely(status & SPIFLG_ERROR_MASK)) {
errors = status & SPIFLG_ERROR_MASK;
goto out;
}
if (davinci_spi->wcount > 0 && !(buf & SPIBUF_TXFULL_MASK)) {
data1_reg_val = ioread32(davinci_spi->base + SPIDAT1);
davinci_spi->wcount--;
data1_reg_val &= ~0xFFFF;
data1_reg_val |= 0xFFFF & davinci_spi->get_tx(davinci_spi);
iowrite32(data1_reg_val, davinci_spi->base + SPIDAT1);
}
out:
return errors;
}
/**
* davinci_spi_bufs - functions which will handle transfer data
* @spi: spi device on which data transfer to be done
* @t: spi transfer in which transfer info is filled
*
* This function will put data to be transferred into data register
* of SPI controller and then wait until the completion will be marked
* by the IRQ Handler.
*/
static int davinci_spi_bufs_pio(struct spi_device *spi, struct spi_transfer *t)
{
struct davinci_spi *davinci_spi;
int ret;
u32 tx_data, data1_reg_val;
u32 errors = 0;
struct davinci_spi_config *spicfg;
struct davinci_spi_platform_data *pdata;
davinci_spi = spi_master_get_devdata(spi->master);
pdata = davinci_spi->pdata;
spicfg = (struct davinci_spi_config *)spi->controller_data;
if (!spicfg)
spicfg = &davinci_spi_default_cfg;
davinci_spi->tx = t->tx_buf;
davinci_spi->rx = t->rx_buf;
davinci_spi->wcount = t->len /
davinci_spi->bytes_per_word[spi->chip_select];
davinci_spi->rcount = davinci_spi->wcount;
data1_reg_val = ioread32(davinci_spi->base + SPIDAT1);
/* Enable SPI */
set_io_bits(davinci_spi->base + SPIGCR1, SPIGCR1_SPIENA_MASK);
if (spicfg->io_type == SPI_IO_TYPE_INTR) {
set_io_bits(davinci_spi->base + SPIINT, SPIINT_MASKINT);
INIT_COMPLETION(davinci_spi->done);
}
/* start the transfer */
davinci_spi->wcount--;
tx_data = davinci_spi->get_tx(davinci_spi);
data1_reg_val &= 0xFFFF0000;
data1_reg_val |= tx_data & 0xFFFF;
iowrite32(data1_reg_val, davinci_spi->base + SPIDAT1);
/* Wait for the transfer to complete */
if (spicfg->io_type == SPI_IO_TYPE_INTR) {
wait_for_completion_interruptible(&(davinci_spi->done));
} else {
while (davinci_spi->rcount > 0 || davinci_spi->wcount > 0) {
errors = davinci_spi_process_events(davinci_spi);
if (errors)
break;
cpu_relax();
}
}
clear_io_bits(davinci_spi->base + SPIINT, SPIINT_MASKALL);
/*
* Check for bit error, desync error,parity error,timeout error and
* receive overflow errors
*/
if (errors) {
ret = davinci_spi_check_error(davinci_spi, errors);
WARN(!ret, "%s: error reported but no error found!\n",
dev_name(&spi->dev));
return ret;
}
return t->len;
}
/**
* davinci_spi_irq - Interrupt handler for SPI Master Controller
* @irq: IRQ number for this SPI Master
* @context_data: structure for SPI Master controller davinci_spi
*
* ISR will determine that interrupt arrives either for READ or WRITE command.
* According to command it will do the appropriate action. It will check
* transfer length and if it is not zero then dispatch transfer command again.
* If transfer length is zero then it will indicate the COMPLETION so that
* davinci_spi_bufs function can go ahead.
*/
static irqreturn_t davinci_spi_irq(s32 irq, void *context_data)
{
struct davinci_spi *davinci_spi = context_data;
int status;
status = davinci_spi_process_events(davinci_spi);
if (unlikely(status != 0))
clear_io_bits(davinci_spi->base + SPIINT, SPIINT_MASKINT);
if ((!davinci_spi->rcount && !davinci_spi->wcount) || status)
complete(&davinci_spi->done);
return IRQ_HANDLED;
}
static int davinci_spi_bufs_dma(struct spi_device *spi, struct spi_transfer *t)
{
struct davinci_spi *davinci_spi;
int int_status = 0;
int count;
struct davinci_spi_dma *davinci_spi_dma;
int data_type, ret;
unsigned long tx_reg, rx_reg;
struct davinci_spi_platform_data *pdata;
struct device *sdev;
davinci_spi = spi_master_get_devdata(spi->master);
pdata = davinci_spi->pdata;
sdev = davinci_spi->bitbang.master->dev.parent;
davinci_spi_dma = &davinci_spi->dma_channels;
tx_reg = (unsigned long)davinci_spi->pbase + SPIDAT1;
rx_reg = (unsigned long)davinci_spi->pbase + SPIBUF;
davinci_spi->tx = t->tx_buf;
davinci_spi->rx = t->rx_buf;
/* convert len to words based on bits_per_word */
data_type = davinci_spi->bytes_per_word[spi->chip_select];
init_completion(&davinci_spi_dma->dma_rx_completion);
init_completion(&davinci_spi_dma->dma_tx_completion);
count = t->len / data_type; /* the number of elements */
/* disable all interrupts for dma transfers */
clear_io_bits(davinci_spi->base + SPIINT, SPIINT_MASKALL);
/* Enable SPI */
set_io_bits(davinci_spi->base + SPIGCR1, SPIGCR1_SPIENA_MASK);
/*
* Transmit DMA setup
*
* If there is transmit data, map the transmit buffer, set it as the
* source of data and set the source B index to data size.
* If there is no transmit data, set the transmit register as the
* source of data, and set the source B index to zero.
*
* The destination is always the transmit register itself. And the
* destination never increments.
*/
if (t->tx_buf) {
t->tx_dma = dma_map_single(&spi->dev, (void *)t->tx_buf, count,
DMA_TO_DEVICE);
if (dma_mapping_error(&spi->dev, t->tx_dma)) {
dev_dbg(sdev, "Unable to DMA map a %d bytes"
" TX buffer\n", count);
return -ENOMEM;
}
}
edma_set_transfer_params(davinci_spi_dma->dma_tx_channel,
data_type, count, 1, 0, ASYNC);
edma_set_dest(davinci_spi_dma->dma_tx_channel, tx_reg, INCR, W8BIT);
edma_set_src(davinci_spi_dma->dma_tx_channel,
t->tx_buf ? t->tx_dma : tx_reg, INCR, W8BIT);
edma_set_src_index(davinci_spi_dma->dma_tx_channel,
t->tx_buf ? data_type : 0, 0);
edma_set_dest_index(davinci_spi_dma->dma_tx_channel, 0, 0);
if (t->rx_buf) {
t->rx_dma = dma_map_single(&spi->dev, (void *)t->rx_buf, count,
DMA_FROM_DEVICE);
if (dma_mapping_error(&spi->dev, t->rx_dma)) {
dev_dbg(sdev, "Couldn't DMA map a %d bytes RX buffer\n",
count);
if (t->tx_buf != NULL)
dma_unmap_single(NULL, t->tx_dma,
count, DMA_TO_DEVICE);
return -ENOMEM;
}
edma_set_transfer_params(davinci_spi_dma->dma_rx_channel,
data_type, count, 1, 0, ASYNC);
edma_set_src(davinci_spi_dma->dma_rx_channel,
rx_reg, INCR, W8BIT);
edma_set_dest(davinci_spi_dma->dma_rx_channel,
t->rx_dma, INCR, W8BIT);
edma_set_src_index(davinci_spi_dma->dma_rx_channel, 0, 0);
edma_set_dest_index(davinci_spi_dma->dma_rx_channel,
data_type, 0);
}
if (pdata->cshold_bug) {
u16 spidat1 = ioread16(davinci_spi->base + SPIDAT1 + 2);
iowrite16(spidat1, davinci_spi->base + SPIDAT1 + 2);
}
if (t->rx_buf)
edma_start(davinci_spi_dma->dma_rx_channel);
edma_start(davinci_spi_dma->dma_tx_channel);
davinci_spi_set_dma_req(spi, 1);
wait_for_completion_interruptible(&davinci_spi_dma->dma_tx_completion);
if (t->rx_buf)
wait_for_completion_interruptible(
&davinci_spi_dma->dma_rx_completion);
if (t->tx_buf)
dma_unmap_single(NULL, t->tx_dma, count, DMA_TO_DEVICE);
if (t->rx_buf)
dma_unmap_single(NULL, t->rx_dma, count, DMA_FROM_DEVICE);
/*
* Check for bit error, desync error,parity error,timeout error and
* receive overflow errors
*/
int_status = ioread32(davinci_spi->base + SPIFLG);
ret = davinci_spi_check_error(davinci_spi, int_status);
if (ret != 0)
return ret;
return t->len;
}
/**
* davinci_spi_probe - probe function for SPI Master Controller
* @pdev: platform_device structure which contains plateform specific data
*/
static int davinci_spi_probe(struct platform_device *pdev)
{
struct spi_master *master;
struct davinci_spi *davinci_spi;
struct davinci_spi_platform_data *pdata;
struct resource *r, *mem;
resource_size_t dma_rx_chan = SPI_NO_RESOURCE;
resource_size_t dma_tx_chan = SPI_NO_RESOURCE;
resource_size_t dma_eventq = SPI_NO_RESOURCE;
int i = 0, ret = 0;
u32 spipc0;
pdata = pdev->dev.platform_data;
if (pdata == NULL) {
ret = -ENODEV;
goto err;
}
master = spi_alloc_master(&pdev->dev, sizeof(struct davinci_spi));
if (master == NULL) {
ret = -ENOMEM;
goto err;
}
dev_set_drvdata(&pdev->dev, master);
davinci_spi = spi_master_get_devdata(master);
if (davinci_spi == NULL) {
ret = -ENOENT;
goto free_master;
}
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (r == NULL) {
ret = -ENOENT;
goto free_master;
}
davinci_spi->pbase = r->start;
davinci_spi->region_size = resource_size(r);
davinci_spi->pdata = pdata;
mem = request_mem_region(r->start, davinci_spi->region_size,
pdev->name);
if (mem == NULL) {
ret = -EBUSY;
goto free_master;
}
davinci_spi->base = ioremap(r->start, davinci_spi->region_size);
if (davinci_spi->base == NULL) {
ret = -ENOMEM;
goto release_region;
}
davinci_spi->irq = platform_get_irq(pdev, 0);
if (davinci_spi->irq <= 0) {
ret = -EINVAL;
goto unmap_io;
}
ret = request_irq(davinci_spi->irq, davinci_spi_irq, 0,
dev_name(&pdev->dev), davinci_spi);
if (ret)
goto unmap_io;
davinci_spi->bitbang.master = spi_master_get(master);
if (davinci_spi->bitbang.master == NULL) {
ret = -ENODEV;
goto irq_free;
}
davinci_spi->clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(davinci_spi->clk)) {
ret = -ENODEV;
goto put_master;
}
clk_enable(davinci_spi->clk);
master->bus_num = pdev->id;
master->num_chipselect = pdata->num_chipselect;
master->setup = davinci_spi_setup;
master->cleanup = davinci_spi_cleanup;
davinci_spi->bitbang.chipselect = davinci_spi_chipselect;
davinci_spi->bitbang.setup_transfer = davinci_spi_setup_transfer;
davinci_spi->version = pdata->version;
use_dma = pdata->use_dma;
davinci_spi->bitbang.flags = SPI_NO_CS | SPI_LSB_FIRST | SPI_LOOP;
if (davinci_spi->version == SPI_VERSION_2)
davinci_spi->bitbang.flags |= SPI_READY;
if (use_dma) {
r = platform_get_resource(pdev, IORESOURCE_DMA, 0);
if (r)
dma_rx_chan = r->start;
r = platform_get_resource(pdev, IORESOURCE_DMA, 1);
if (r)
dma_tx_chan = r->start;
r = platform_get_resource(pdev, IORESOURCE_DMA, 2);
if (r)
dma_eventq = r->start;
}
if (!use_dma ||
dma_rx_chan == SPI_NO_RESOURCE ||
dma_tx_chan == SPI_NO_RESOURCE ||
dma_eventq == SPI_NO_RESOURCE) {
davinci_spi->bitbang.txrx_bufs = davinci_spi_bufs_pio;
use_dma = 0;
} else {
davinci_spi->bitbang.txrx_bufs = davinci_spi_bufs_dma;
davinci_spi->dma_channels.dma_rx_channel = -1;
davinci_spi->dma_channels.dma_rx_sync_dev = dma_rx_chan;
davinci_spi->dma_channels.dma_tx_channel = -1;
davinci_spi->dma_channels.dma_tx_sync_dev = dma_tx_chan;
davinci_spi->dma_channels.eventq = dma_eventq;
dev_info(&pdev->dev, "DaVinci SPI driver in EDMA mode\n"
"Using RX channel = %d , TX channel = %d and "
"event queue = %d", dma_rx_chan, dma_tx_chan,
dma_eventq);
}
davinci_spi->get_rx = davinci_spi_rx_buf_u8;
davinci_spi->get_tx = davinci_spi_tx_buf_u8;
init_completion(&davinci_spi->done);
/* Reset In/OUT SPI module */
iowrite32(0, davinci_spi->base + SPIGCR0);
udelay(100);
iowrite32(1, davinci_spi->base + SPIGCR0);
/* Set up SPIPC0. CS and ENA init is done in davinci_spi_setup */
spipc0 = SPIPC0_DIFUN_MASK | SPIPC0_DOFUN_MASK | SPIPC0_CLKFUN_MASK;
iowrite32(spipc0, davinci_spi->base + SPIPC0);
/* initialize chip selects */
if (pdata->chip_sel) {
for (i = 0; i < pdata->num_chipselect; i++) {
if (pdata->chip_sel[i] != SPI_INTERN_CS)
gpio_direction_output(pdata->chip_sel[i], 1);
}
}
/* Clock internal */
if (davinci_spi->pdata->clk_internal)
set_io_bits(davinci_spi->base + SPIGCR1,
SPIGCR1_CLKMOD_MASK);
else
clear_io_bits(davinci_spi->base + SPIGCR1,
SPIGCR1_CLKMOD_MASK);
if (pdata->intr_line)
iowrite32(SPI_INTLVL_1, davinci_spi->base + SPILVL);
else
iowrite32(SPI_INTLVL_0, davinci_spi->base + SPILVL);
iowrite32(CS_DEFAULT, davinci_spi->base + SPIDEF);
/* master mode default */
set_io_bits(davinci_spi->base + SPIGCR1, SPIGCR1_MASTER_MASK);
ret = spi_bitbang_start(&davinci_spi->bitbang);
if (ret)
goto free_clk;
dev_info(&pdev->dev, "Controller at 0x%p\n", davinci_spi->base);
return ret;
free_clk:
clk_disable(davinci_spi->clk);
clk_put(davinci_spi->clk);
put_master:
spi_master_put(master);
irq_free:
free_irq(davinci_spi->irq, davinci_spi);
unmap_io:
iounmap(davinci_spi->base);
release_region:
release_mem_region(davinci_spi->pbase, davinci_spi->region_size);
free_master:
kfree(master);
err:
return ret;
}
/**
* davinci_spi_remove - remove function for SPI Master Controller
* @pdev: platform_device structure which contains plateform specific data
*
* This function will do the reverse action of davinci_spi_probe function
* It will free the IRQ and SPI controller's memory region.
* It will also call spi_bitbang_stop to destroy the work queue which was
* created by spi_bitbang_start.
*/
static int __exit davinci_spi_remove(struct platform_device *pdev)
{
struct davinci_spi *davinci_spi;
struct spi_master *master;
master = dev_get_drvdata(&pdev->dev);
davinci_spi = spi_master_get_devdata(master);
spi_bitbang_stop(&davinci_spi->bitbang);
clk_disable(davinci_spi->clk);
clk_put(davinci_spi->clk);
spi_master_put(master);
free_irq(davinci_spi->irq, davinci_spi);
iounmap(davinci_spi->base);
release_mem_region(davinci_spi->pbase, davinci_spi->region_size);
return 0;
}
static struct platform_driver davinci_spi_driver = {
.driver.name = "spi_davinci",
.remove = __exit_p(davinci_spi_remove),
};
static int __init davinci_spi_init(void)
{
return platform_driver_probe(&davinci_spi_driver, davinci_spi_probe);
}
module_init(davinci_spi_init);
static void __exit davinci_spi_exit(void)
{
platform_driver_unregister(&davinci_spi_driver);
}
module_exit(davinci_spi_exit);
MODULE_DESCRIPTION("TI DaVinci SPI Master Controller Driver");
MODULE_LICENSE("GPL");