mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-23 16:09:57 +07:00
faee4edf6c
- New boards support: BTicino i.MX6DL Mamoj board, DHCOM iMX6 SoM and
PDK2 board, Engicam i.CoreM6 1.5 Quad/Dual MIPI starter kit,
Kieback & Peter GmbH iMX6Q TPC board.
- A series from Anson Huang to add a bunch of devices for i.MX6SX
SabreAuto board, PMIC, IO expanders, FEC, Watchdog, LED and Touch.
- Update i.MX7D for cpufreq support, using operating-points-v2
bindings, correcting cpu supply name for voltage scaling.
- Clean up unneeded 'codec-handle' property from imx25-pdk and
imx53-tx53 device tree.
- Switch SoC dtsi and NXP board dts files to use SPDX identifier.
- Remove unnecessary '#address-cells/#size-cells' to fix DTC warning
avoid_unnecessary_addr_size seen with W=1 switch.
- A series from Rob Herring to fix DTC warning graph_endpoint seen with
IPU OF graph when W=1 switch is on.
- Update a few boards to use symbol name instead of hard-coding the
input codes.
- Update a number of boards to use IRQ_TYPE specifier instead of the
raw value.
- A few updates for i.MX6 RDU2 board: bumping SoC/PU operating points,
adding assigned clocks for GPU, and enabling eGalax touchscreen.
- A couple of i.MX51 RDU1 updates: limiting usbh1 to full-speed, and
cleaning up eMMC device node.
- Convert Hummingboard audio bindings from imx-audio-sgtl5000 to
simple-audio-card, so that auxiliary audio devices such as external
amplifiers can be supported.
- Replace underscore with hyphen in aliases name to fix DTC warning
alias_paths with W=1 switch.
- A couple of updates on i.MX7D SAI and i.MX6ULL UART5 pin defines.
- Other random and small changes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJbAYgeAAoJEFBXWFqHsHzO8ZUH/RG21GCtMGozrIoL9f0/6R4T
wBj/vdg31XGk7XYkmxKH5J6hwryco7Z2uMfKhsRbfXUzt+DxwtseJUgaKHygk/oh
ns7LhuSvhYwqa6AENN70DOt4b3TX/sAyYrBIFUXQRsZrafPhn7+8/Y8oiLbY3lOs
cctrHA31jz5ytXVoLT1AkFST020JcRjaTpRFYqDohpcOOMqhpjPxPJ6uF6lE/LHf
XVzBYGbxzmzH5PDpEy7KjzkxDt0cvBfH7LrfvcHzi8hGho3P1ShpRah/TYKpmwkx
MVD1NRFTCwKgIjibcjfLse9NJdixza5j6pvWaCacC9agWG6drOxYvYy4ILe2ros=
=F8Nx
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt
i.MX device tree update for 4.18:
- New boards support: BTicino i.MX6DL Mamoj board, DHCOM iMX6 SoM and
PDK2 board, Engicam i.CoreM6 1.5 Quad/Dual MIPI starter kit,
Kieback & Peter GmbH iMX6Q TPC board.
- A series from Anson Huang to add a bunch of devices for i.MX6SX
SabreAuto board, PMIC, IO expanders, FEC, Watchdog, LED and Touch.
- Update i.MX7D for cpufreq support, using operating-points-v2
bindings, correcting cpu supply name for voltage scaling.
- Clean up unneeded 'codec-handle' property from imx25-pdk and
imx53-tx53 device tree.
- Switch SoC dtsi and NXP board dts files to use SPDX identifier.
- Remove unnecessary '#address-cells/#size-cells' to fix DTC warning
avoid_unnecessary_addr_size seen with W=1 switch.
- A series from Rob Herring to fix DTC warning graph_endpoint seen with
IPU OF graph when W=1 switch is on.
- Update a few boards to use symbol name instead of hard-coding the
input codes.
- Update a number of boards to use IRQ_TYPE specifier instead of the
raw value.
- A few updates for i.MX6 RDU2 board: bumping SoC/PU operating points,
adding assigned clocks for GPU, and enabling eGalax touchscreen.
- A couple of i.MX51 RDU1 updates: limiting usbh1 to full-speed, and
cleaning up eMMC device node.
- Convert Hummingboard audio bindings from imx-audio-sgtl5000 to
simple-audio-card, so that auxiliary audio devices such as external
amplifiers can be supported.
- Replace underscore with hyphen in aliases name to fix DTC warning
alias_paths with W=1 switch.
- A couple of updates on i.MX7D SAI and i.MX6ULL UART5 pin defines.
- Other random and small changes.
* tag 'imx-dt-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (72 commits)
ARM: dts: imx28/imx53: enable edt-ft5x06 wakeup source
ARM: dts: imx51-zii-rdu1: cleanup eMMC node
ARM: dts: vf610-zii-dev: enable vf610 builtin temp sensor
ARM: dts: imx7d: use operating-points-v2 for cpu
ARM: dts: imx7s-warp: remove unnecessary cpu regulator supply
ARM: dts: imx7d: correct cpu supply name for voltage scaling
ARM: dts: imx51-zii-rdu1: limit usbh1 to full-speed
ARM: dts: imx6/7: Remove unit-address from anatop regulators
ARM: dts: imx: Switch NXP boards to SPDX identifier
ARM: dts: imx6qdl-phytec-pfla02: Use IRQ_TYPE specifier
ARM: dts: imx53-voipac-dmm-668: Use IRQ_TYPE specifier
ARM: dts: imx53-qsb: Use IRQ_TYPE specifier
ARM: dts: vf-colibri-eval-v3: Use IRQ_TYPE specifier
ARM: dts: imx6q-gk802: Do not hardcode input codes
ARM: dts: imx53-smd: Do not hardcode input codes
ARM: dts: imx53-ard: Do not hardcode input codes
ARM: dts: imx7: Fix error in coresight TPIU graph connection
ARM: dts: imx53: Fix LDB OF graph warning
ARM: dts: imx: fix IPU OF graph endpoint node names
ARM: dts: imx: Switch to SPDX identifier
...
Signed-off-by: Olof Johansson <olof@lixom.net>
411 lines
9.3 KiB
Plaintext
411 lines
9.3 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0
|
|
//
|
|
// Copyright 2012 Steffen Trumtrar, Pengutronix
|
|
//
|
|
// based on imx27.dtsi
|
|
|
|
#include "imx35-pinfunc.h"
|
|
|
|
/ {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
/*
|
|
* The decompressor and also some bootloaders rely on a
|
|
* pre-existing /chosen node to be available to insert the
|
|
* command line and merge other ATAGS info.
|
|
* Also for U-Boot there must be a pre-existing /memory node.
|
|
*/
|
|
chosen {};
|
|
memory { device_type = "memory"; };
|
|
|
|
aliases {
|
|
ethernet0 = &fec;
|
|
gpio0 = &gpio1;
|
|
gpio1 = &gpio2;
|
|
gpio2 = &gpio3;
|
|
serial0 = &uart1;
|
|
serial1 = &uart2;
|
|
serial2 = &uart3;
|
|
spi0 = &spi1;
|
|
spi1 = &spi2;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu@0 {
|
|
compatible = "arm,arm1136jf-s";
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
avic: avic-interrupt-controller@68000000 {
|
|
compatible = "fsl,imx35-avic", "fsl,avic";
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
reg = <0x68000000 0x10000000>;
|
|
};
|
|
|
|
soc {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "simple-bus";
|
|
interrupt-parent = <&avic>;
|
|
ranges;
|
|
|
|
L2: l2-cache@30000000 {
|
|
compatible = "arm,l210-cache";
|
|
reg = <0x30000000 0x1000>;
|
|
cache-unified;
|
|
cache-level = <2>;
|
|
};
|
|
|
|
aips1: aips@43f00000 {
|
|
compatible = "fsl,aips", "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x43f00000 0x100000>;
|
|
ranges;
|
|
|
|
i2c1: i2c@43f80000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
|
|
reg = <0x43f80000 0x4000>;
|
|
clocks = <&clks 51>;
|
|
clock-names = "ipg_per";
|
|
interrupts = <10>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c3: i2c@43f84000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
|
|
reg = <0x43f84000 0x4000>;
|
|
clocks = <&clks 53>;
|
|
clock-names = "ipg_per";
|
|
interrupts = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart1: serial@43f90000 {
|
|
compatible = "fsl,imx35-uart", "fsl,imx21-uart";
|
|
reg = <0x43f90000 0x4000>;
|
|
clocks = <&clks 9>, <&clks 70>;
|
|
clock-names = "ipg", "per";
|
|
interrupts = <45>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart2: serial@43f94000 {
|
|
compatible = "fsl,imx35-uart", "fsl,imx21-uart";
|
|
reg = <0x43f94000 0x4000>;
|
|
clocks = <&clks 9>, <&clks 71>;
|
|
clock-names = "ipg", "per";
|
|
interrupts = <32>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c2: i2c@43f98000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
|
|
reg = <0x43f98000 0x4000>;
|
|
clocks = <&clks 52>;
|
|
clock-names = "ipg_per";
|
|
interrupts = <4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ssi1: ssi@43fa0000 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "fsl,imx35-ssi", "fsl,imx21-ssi";
|
|
reg = <0x43fa0000 0x4000>;
|
|
interrupts = <11>;
|
|
clocks = <&clks 68>;
|
|
dmas = <&sdma 28 0 0>,
|
|
<&sdma 29 0 0>;
|
|
dma-names = "rx", "tx";
|
|
fsl,fifo-depth = <15>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi1: cspi@43fa4000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx35-cspi";
|
|
reg = <0x43fa4000 0x4000>;
|
|
clocks = <&clks 35 &clks 35>;
|
|
clock-names = "ipg", "per";
|
|
interrupts = <14>;
|
|
status = "disabled";
|
|
};
|
|
|
|
kpp: kpp@43fa8000 {
|
|
compatible = "fsl,imx35-kpp", "fsl,imx21-kpp";
|
|
reg = <0x43fa8000 0x4000>;
|
|
interrupts = <24>;
|
|
clocks = <&clks 56>;
|
|
status = "disabled";
|
|
};
|
|
|
|
iomuxc: iomuxc@43fac000 {
|
|
compatible = "fsl,imx35-iomuxc";
|
|
reg = <0x43fac000 0x4000>;
|
|
};
|
|
};
|
|
|
|
spba: spba-bus@50000000 {
|
|
compatible = "fsl,spba-bus", "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x50000000 0x100000>;
|
|
ranges;
|
|
|
|
uart3: serial@5000c000 {
|
|
compatible = "fsl,imx35-uart", "fsl,imx21-uart";
|
|
reg = <0x5000c000 0x4000>;
|
|
clocks = <&clks 9>, <&clks 72>;
|
|
clock-names = "ipg", "per";
|
|
interrupts = <18>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi2: cspi@50010000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx35-cspi";
|
|
reg = <0x50010000 0x4000>;
|
|
interrupts = <13>;
|
|
clocks = <&clks 36 &clks 36>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
fec: fec@50038000 {
|
|
compatible = "fsl,imx35-fec", "fsl,imx27-fec";
|
|
reg = <0x50038000 0x4000>;
|
|
clocks = <&clks 46>, <&clks 8>;
|
|
clock-names = "ipg", "ahb";
|
|
interrupts = <57>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
aips2: aips@53f00000 {
|
|
compatible = "fsl,aips", "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x53f00000 0x100000>;
|
|
ranges;
|
|
|
|
clks: ccm@53f80000 {
|
|
compatible = "fsl,imx35-ccm";
|
|
reg = <0x53f80000 0x4000>;
|
|
interrupts = <31>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
gpt: timer@53f90000 {
|
|
compatible = "fsl,imx35-gpt", "fsl,imx31-gpt";
|
|
reg = <0x53f90000 0x4000>;
|
|
interrupts = <29>;
|
|
clocks = <&clks 9>, <&clks 50>;
|
|
clock-names = "ipg", "per";
|
|
};
|
|
|
|
gpio3: gpio@53fa4000 {
|
|
compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
|
|
reg = <0x53fa4000 0x4000>;
|
|
interrupts = <56>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
esdhc1: esdhc@53fb4000 {
|
|
compatible = "fsl,imx35-esdhc";
|
|
reg = <0x53fb4000 0x4000>;
|
|
interrupts = <7>;
|
|
clocks = <&clks 9>, <&clks 8>, <&clks 43>;
|
|
clock-names = "ipg", "ahb", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
esdhc2: esdhc@53fb8000 {
|
|
compatible = "fsl,imx35-esdhc";
|
|
reg = <0x53fb8000 0x4000>;
|
|
interrupts = <8>;
|
|
clocks = <&clks 9>, <&clks 8>, <&clks 44>;
|
|
clock-names = "ipg", "ahb", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
esdhc3: esdhc@53fbc000 {
|
|
compatible = "fsl,imx35-esdhc";
|
|
reg = <0x53fbc000 0x4000>;
|
|
interrupts = <9>;
|
|
clocks = <&clks 9>, <&clks 8>, <&clks 45>;
|
|
clock-names = "ipg", "ahb", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
audmux: audmux@53fc4000 {
|
|
compatible = "fsl,imx35-audmux", "fsl,imx31-audmux";
|
|
reg = <0x53fc4000 0x4000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
gpio1: gpio@53fcc000 {
|
|
compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
|
|
reg = <0x53fcc000 0x4000>;
|
|
interrupts = <52>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio2: gpio@53fd0000 {
|
|
compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
|
|
reg = <0x53fd0000 0x4000>;
|
|
interrupts = <51>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
sdma: sdma@53fd4000 {
|
|
compatible = "fsl,imx35-sdma";
|
|
reg = <0x53fd4000 0x4000>;
|
|
clocks = <&clks 9>, <&clks 65>;
|
|
clock-names = "ipg", "ahb";
|
|
#dma-cells = <3>;
|
|
interrupts = <34>;
|
|
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx35.bin";
|
|
};
|
|
|
|
wdog: wdog@53fdc000 {
|
|
compatible = "fsl,imx35-wdt", "fsl,imx21-wdt";
|
|
reg = <0x53fdc000 0x4000>;
|
|
clocks = <&clks 74>;
|
|
clock-names = "";
|
|
interrupts = <55>;
|
|
};
|
|
|
|
can1: can@53fe4000 {
|
|
compatible = "fsl,imx35-flexcan", "fsl,imx25-flexcan";
|
|
reg = <0x53fe4000 0x1000>;
|
|
clocks = <&clks 33>, <&clks 33>;
|
|
clock-names = "ipg", "per";
|
|
interrupts = <43>;
|
|
status = "disabled";
|
|
};
|
|
|
|
can2: can@53fe8000 {
|
|
compatible = "fsl,imx35-flexcan", "fsl,imx25-flexcan";
|
|
reg = <0x53fe8000 0x1000>;
|
|
clocks = <&clks 34>, <&clks 34>;
|
|
clock-names = "ipg", "per";
|
|
interrupts = <44>;
|
|
status = "disabled";
|
|
};
|
|
|
|
iim@53ff0000 {
|
|
compatible = "fsl,imx35-iim";
|
|
reg = <0x53ff0000 0x4000>;
|
|
interrupts = <19>;
|
|
clocks = <&clks 80>;
|
|
};
|
|
|
|
usbotg: usb@53ff4000 {
|
|
compatible = "fsl,imx35-usb", "fsl,imx27-usb";
|
|
reg = <0x53ff4000 0x0200>;
|
|
interrupts = <37>;
|
|
clocks = <&clks 9>, <&clks 73>, <&clks 28>;
|
|
clock-names = "ipg", "ahb", "per";
|
|
fsl,usbmisc = <&usbmisc 0>;
|
|
fsl,usbphy = <&usbphy0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usbhost1: usb@53ff4400 {
|
|
compatible = "fsl,imx35-usb", "fsl,imx27-usb";
|
|
reg = <0x53ff4400 0x0200>;
|
|
interrupts = <35>;
|
|
clocks = <&clks 9>, <&clks 73>, <&clks 28>;
|
|
clock-names = "ipg", "ahb", "per";
|
|
fsl,usbmisc = <&usbmisc 1>;
|
|
fsl,usbphy = <&usbphy1>;
|
|
dr_mode = "host";
|
|
status = "disabled";
|
|
};
|
|
|
|
usbmisc: usbmisc@53ff4600 {
|
|
#index-cells = <1>;
|
|
compatible = "fsl,imx35-usbmisc";
|
|
reg = <0x53ff4600 0x00f>;
|
|
};
|
|
};
|
|
|
|
emi@80000000 { /* External Memory Interface */
|
|
compatible = "fsl,emi", "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x80000000 0x40000000>;
|
|
ranges;
|
|
|
|
nfc: nand@bb000000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,imx35-nand", "fsl,imx25-nand";
|
|
reg = <0xbb000000 0x2000>;
|
|
clocks = <&clks 29>;
|
|
clock-names = "";
|
|
interrupts = <33>;
|
|
status = "disabled";
|
|
};
|
|
|
|
weim: weim@b8002000 {
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
clocks = <&clks 0>;
|
|
compatible = "fsl,imx35-weim", "fsl,imx27-weim";
|
|
reg = <0xb8002000 0x1000>;
|
|
ranges = <
|
|
0 0 0xa0000000 0x8000000
|
|
1 0 0xa8000000 0x8000000
|
|
2 0 0xb0000000 0x2000000
|
|
3 0 0xb2000000 0x2000000
|
|
4 0 0xb4000000 0x2000000
|
|
5 0 0xb6000000 0x2000000
|
|
>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|
|
|
|
usbphy {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
usbphy0: usb-phy@0 {
|
|
reg = <0>;
|
|
compatible = "usb-nop-xceiv";
|
|
#phy-cells = <0>;
|
|
};
|
|
|
|
usbphy1: usb-phy@1 {
|
|
reg = <1>;
|
|
compatible = "usb-nop-xceiv";
|
|
#phy-cells = <0>;
|
|
};
|
|
};
|
|
};
|