Pavel Fedin cd998ecd2f net: smsc911x: Reset PHY during initialization ... On certain hardware after software reboot the chip may get stuck and fail to reinitialize during reset. This can be fixed by ensuring that PHY is reset too. Old PHY resetting method required operational MDIO interface, therefore the chip should have been already set up. In order to be able to function during probe, it is changed to use PMT_CTRL register. The problem could be observed on SMDK5410 board. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>		2015-11-16 14:43:14 -05:00
..
epic100.c	PCI: Remove DEFINE_PCI_DEVICE_TABLE macro use	2014-08-12 12:15:14 -06:00
Kconfig	drivers/net: remove all references to obsolete Ethernet-HOWTO	2015-06-23 06:50:35 -07:00
Makefile
smc91c92_cs.c	net: smc91c92_cs: Use setup_timer and mod_timer	2015-03-01 13:40:22 -05:00
smc91x.c	net: smc91x: convert pxa dma to dmaengine	2015-09-17 13:36:52 -07:00
smc91x.h	net: smc91x: convert pxa dma to dmaengine	2015-09-17 13:36:52 -07:00
smc911x.c	net: ethernet: smsc: drop owner assignment from platform_drivers	2014-10-20 16:21:12 +02:00
smc911x.h
smc9194.c	smsc9194: Remove uncompilable #if 0'd use of pr_dbg	2015-08-27 13:56:05 -07:00
smc9194.h
smsc911x.c	net: smsc911x: Reset PHY during initialization	2015-11-16 14:43:14 -05:00
smsc911x.h	smsc: replace WARN_ON() with WARN_ON_SMP()	2014-08-11 14:38:29 -07:00
smsc9420.c	PCI: Remove DEFINE_PCI_DEVICE_TABLE macro use	2014-08-12 12:15:14 -06:00
smsc9420.h