AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-15 11:36:41 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
d359667767
linux_dsm_epyc7002/drivers/net/wireless/iwlwifi/iwl-shared.h
Don Fry b1c23d9ec3 iwlwifi: create iwl_nic structure 
Create iwl_nic structure and link it together.

Signed-off-by: Don Fry <donald.h.fry@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-17 10:12:03 -08:00

659 lines
20 KiB
C
Raw Blame History

/******************************************************************************
*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2007 - 2012 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
* USA
*
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.GPL.
*
* Contact Information:
* Intel Linux Wireless <ilw@linux.intel.com>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*
* BSD LICENSE
*
* Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*****************************************************************************/
#ifndef __iwl_shared_h__
#define __iwl_shared_h__
#include <linux/types.h>
#include <linux/spinlock.h>
#include <linux/mutex.h>
#include <linux/gfp.h>
#include <linux/mm.h> /* for page_address */
#include <net/mac80211.h>
#include "iwl-commands.h"
/**
* DOC: shared area - role and goal
*
* The shared area contains all the data exported by the upper layer to the
* other layers. Since the bus and transport layer shouldn't dereference
* iwl_priv, all the data needed by the upper layer and the transport / bus
* layer must be here.
* The shared area also holds pointer to all the other layers. This allows a
* layer to call a function from another layer.
*
* NOTE: All the layers hold a pointer to the shared area which must be shrd.
* A few macros assume that (_m)->shrd points to the shared area no matter
* what _m is.
*
* gets notifications about enumeration, suspend, resume.
* For the moment, the bus layer is not a linux kernel module as itself, and
* the module_init function of the driver must call the bus specific
* registration functions. These functions are listed at the end of this file.
* For the moment, there is only one implementation of this interface: PCI-e.
* This implementation is iwl-pci.c
*/
struct iwl_bus;
struct iwl_priv;
struct iwl_trans;
struct iwl_sensitivity_ranges;
struct iwl_trans_ops;
#define DRV_NAME "iwlwifi"
#define IWLWIFI_VERSION "in-tree:"
#define DRV_COPYRIGHT "Copyright(c) 2003-2012 Intel Corporation"
#define DRV_AUTHOR "<ilw@linux.intel.com>"
extern struct iwl_mod_params iwlagn_mod_params;
#define IWL_DISABLE_HT_ALL BIT(0)
#define IWL_DISABLE_HT_TXAGG BIT(1)
#define IWL_DISABLE_HT_RXAGG BIT(2)
/**
* struct iwl_mod_params
*
* Holds the module parameters
*
* @sw_crypto: using hardware encryption, default = 0
* @num_of_queues: number of tx queue, HW dependent
* @disable_11n: disable 11n capabilities, default = 0,
* use IWL_DISABLE_HT_* constants
* @amsdu_size_8K: enable 8K amsdu size, default = 1
* @antenna: both antennas (use diversity), default = 0
* @restart_fw: restart firmware, default = 1
* @plcp_check: enable plcp health check, default = true
* @ack_check: disable ack health check, default = false
* @wd_disable: enable stuck queue check, default = 0
* @bt_coex_active: enable bt coex, default = true
* @led_mode: system default, default = 0
* @no_sleep_autoadjust: disable autoadjust, default = true
* @power_save: disable power save, default = false
* @power_level: power level, default = 1
* @debug_level: levels are IWL_DL_*
* @ant_coupling: antenna coupling in dB, default = 0
* @bt_ch_announce: BT channel inhibition, default = enable
* @wanted_ucode_alternative: ucode alternative to use, default = 1
* @auto_agg: enable agg. without check, default = true
*/
struct iwl_mod_params {
int sw_crypto;
int num_of_queues;
unsigned int disable_11n;
int amsdu_size_8K;
int antenna;
int restart_fw;
bool plcp_check;
bool ack_check;
int wd_disable;
bool bt_coex_active;
int led_mode;
bool no_sleep_autoadjust;
bool power_save;
int power_level;
u32 debug_level;
int ant_coupling;
bool bt_ch_announce;
int wanted_ucode_alternative;
bool auto_agg;
};
/**
* struct iwl_hw_params
*
* Holds the module parameters
*
* @max_txq_num: Max # Tx queues supported
* @num_ampdu_queues: num of ampdu queues
* @tx_chains_num: Number of TX chains
* @rx_chains_num: Number of RX chains
* @valid_tx_ant: usable antennas for TX
* @valid_rx_ant: usable antennas for RX
* @ht40_channel: is 40MHz width possible: BIT(IEEE80211_BAND_XXX)
* @sku: sku read from EEPROM
* @rx_page_order: Rx buffer page order
* @max_inst_size: for ucode use
* @max_data_size: for ucode use
* @ct_kill_threshold: temperature threshold - in hw dependent unit
* @ct_kill_exit_threshold: when to reeable the device - in hw dependent unit
* relevant for 1000, 6000 and up
* @wd_timeout: TX queues watchdog timeout
* @struct iwl_sensitivity_ranges: range of sensitivity values
*/
struct iwl_hw_params {
u8 max_txq_num;
u8 num_ampdu_queues;
u8 tx_chains_num;
u8 rx_chains_num;
u8 valid_tx_ant;
u8 valid_rx_ant;
u8 ht40_channel;
bool shadow_reg_enable;
u16 sku;
u32 rx_page_order;
u32 max_inst_size;
u32 max_data_size;
u32 ct_kill_threshold;
u32 ct_kill_exit_threshold;
unsigned int wd_timeout;
const struct iwl_sensitivity_ranges *sens;
};
/**
* enum iwl_ucode_type
*
* The type of ucode currently loaded on the hardware.
*
* @IWL_UCODE_NONE: No ucode loaded
* @IWL_UCODE_REGULAR: Normal runtime ucode
* @IWL_UCODE_INIT: Initial ucode
* @IWL_UCODE_WOWLAN: Wake on Wireless enabled ucode
*/
enum iwl_ucode_type {
IWL_UCODE_NONE,
IWL_UCODE_REGULAR,
IWL_UCODE_INIT,
IWL_UCODE_WOWLAN,
};
/**
* struct iwl_notification_wait - notification wait entry
* @list: list head for global list
* @fn: function called with the notification
* @cmd: command ID
*
* This structure is not used directly, to wait for a
* notification declare it on the stack, and call
* iwlagn_init_notification_wait() with appropriate
* parameters. Then do whatever will cause the ucode
* to notify the driver, and to wait for that then
* call iwlagn_wait_notification().
*
* Each notification is one-shot. If at some point we
* need to support multi-shot notifications (which
* can't be allocated on the stack) we need to modify
* the code for them.
*/
struct iwl_notification_wait {
struct list_head list;
void (*fn)(struct iwl_trans *trans, struct iwl_rx_packet *pkt,
void *data);
void *fn_data;
u8 cmd;
bool triggered, aborted;
};
/**
* enum iwl_pa_type - Power Amplifier type
* @IWL_PA_SYSTEM: based on uCode configuration
* @IWL_PA_INTERNAL: use Internal only
*/
enum iwl_pa_type {
IWL_PA_SYSTEM = 0,
IWL_PA_INTERNAL = 1,
};
/*
* LED mode
* IWL_LED_DEFAULT: use device default
* IWL_LED_RF_STATE: turn LED on/off based on RF state
* LED ON = RF ON
* LED OFF = RF OFF
* IWL_LED_BLINK: adjust led blink rate based on blink table
* IWL_LED_DISABLE: led disabled
*/
enum iwl_led_mode {
IWL_LED_DEFAULT,
IWL_LED_RF_STATE,
IWL_LED_BLINK,
IWL_LED_DISABLE,
};
/**
* struct iwl_cfg
* @name: Offical name of the device
* @fw_name_pre: Firmware filename prefix. The api version and extension
* (.ucode) will be added to filename before loading from disk. The
* filename is constructed as fw_name_pre<api>.ucode.
* @ucode_api_max: Highest version of uCode API supported by driver.
* @ucode_api_ok: oldest version of the uCode API that is OK to load
* without a warning, for use in transitions
* @ucode_api_min: Lowest version of uCode API supported by driver.
* @valid_tx_ant: valid transmit antenna
* @valid_rx_ant: valid receive antenna
* @sku: sku information from EEPROM
* @eeprom_ver: EEPROM version
* @eeprom_calib_ver: EEPROM calibration version
* @lib: pointer to the lib ops
* @additional_nic_config: additional nic configuration
* @base_params: pointer to basic parameters
* @ht_params: point to ht patameters
* @bt_params: pointer to bt parameters
* @pa_type: used by 6000 series only to identify the type of Power Amplifier
* @need_temp_offset_calib: need to perform temperature offset calibration
* @no_xtal_calib: some devices do not need crystal calibration data,
* don't send it to those
* @scan_rx_antennas: available antenna for scan operation
* @led_mode: 0=blinking, 1=On(RF On)/Off(RF Off)
* @adv_pm: advance power management
* @rx_with_siso_diversity: 1x1 device with rx antenna diversity
* @internal_wimax_coex: internal wifi/wimax combo device
* @iq_invert: I/Q inversion
* @temp_offset_v2: support v2 of temperature offset calibration
*
* We enable the driver to be backward compatible wrt API version. The
* driver specifies which APIs it supports (with @ucode_api_max being the
* highest and @ucode_api_min the lowest). Firmware will only be loaded if
* it has a supported API version.
*
* The ideal usage of this infrastructure is to treat a new ucode API
* release as a new hardware revision.
*/
struct iwl_cfg {
/* params specific to an individual device within a device family */
const char *name;
const char *fw_name_pre;
const unsigned int ucode_api_max;
const unsigned int ucode_api_ok;
const unsigned int ucode_api_min;
u8 valid_tx_ant;
u8 valid_rx_ant;
u16 sku;
u16 eeprom_ver;
u16 eeprom_calib_ver;
const struct iwl_lib_ops *lib;
void (*additional_nic_config)(struct iwl_priv *priv);
/* params not likely to change within a device family */
struct iwl_base_params *base_params;
/* params likely to change within a device family */
struct iwl_ht_params *ht_params;
struct iwl_bt_params *bt_params;
enum iwl_pa_type pa_type; /* if used set to IWL_PA_SYSTEM */
const bool need_temp_offset_calib; /* if used set to true */
const bool no_xtal_calib;
u8 scan_rx_antennas[IEEE80211_NUM_BANDS];
enum iwl_led_mode led_mode;
const bool adv_pm;
const bool rx_with_siso_diversity;
const bool internal_wimax_coex;
const bool iq_invert;
const bool temp_offset_v2;
};
/**
* struct iwl_shared - shared fields for all the layers of the driver
*
* @dbg_level_dev: dbg level set per device. Prevails on
* iwlagn_mod_params.debug_level if set (!= 0)
* @ucode_owner: IWL_OWNERSHIP_*
* @cmd_queue: command queue number
* @status: STATUS_*
* @wowlan: are we running wowlan uCode
* @valid_contexts: microcode/device supports multiple contexts
* @bus: pointer to the bus layer data
* @cfg: see struct iwl_cfg
* @priv: pointer to the upper layer data
* @trans: pointer to the transport layer data
* @nic: pointer to the nic data
* @hw_params: see struct iwl_hw_params
* @lock: protect general shared data
* @sta_lock: protects the station table.
* If lock and sta_lock are needed, lock must be acquired first.
* @mutex:
* @wait_command_queue: the wait_queue for SYNC host command nad uCode load
* @eeprom: pointer to the eeprom/OTP image
* @ucode_type: indicator of loaded ucode image
* @notif_waits: things waiting for notification
* @notif_wait_lock: lock protecting notification
* @notif_waitq: head of notification wait queue
* @device_pointers: pointers to ucode event tables
*/
struct iwl_shared {
#ifdef CONFIG_IWLWIFI_DEBUG
u32 dbg_level_dev;
#endif /* CONFIG_IWLWIFI_DEBUG */
#define IWL_OWNERSHIP_DRIVER 0
#define IWL_OWNERSHIP_TM 1
u8 ucode_owner;
u8 cmd_queue;
unsigned long status;
bool wowlan;
u8 valid_contexts;
struct iwl_bus *bus;
struct iwl_cfg *cfg;
struct iwl_priv *priv;
struct iwl_trans *trans;
struct iwl_nic *nic;
struct iwl_hw_params hw_params;
spinlock_t lock;
spinlock_t sta_lock;
struct mutex mutex;
wait_queue_head_t wait_command_queue;
/* eeprom -- this is in the card's little endian byte order */
u8 *eeprom;
/* ucode related variables */
enum iwl_ucode_type ucode_type;
/* notification wait support */
struct list_head notif_waits;
spinlock_t notif_wait_lock;
wait_queue_head_t notif_waitq;
struct {
u32 error_event_table;
u32 log_event_table;
} device_pointers;
};
/*Whatever _m is (iwl_trans, iwl_priv, iwl_bus, these macros will work */
#define priv(_m) ((_m)->shrd->priv)
#define cfg(_m) ((_m)->shrd->cfg)
#define bus(_m) ((_m)->shrd->bus)
#define nic(_m) ((_m)->shrd->nic)
#define trans(_m) ((_m)->shrd->trans)
#define hw_params(_m) ((_m)->shrd->hw_params)
#ifdef CONFIG_IWLWIFI_DEBUG
/*
* iwl_get_debug_level: Return active debug level for device
*
* Using sysfs it is possible to set per device debug level. This debug
* level will be used if set, otherwise the global debug level which can be
* set via module parameter is used.
*/
static inline u32 iwl_get_debug_level(struct iwl_shared *shrd)
{
if (shrd->dbg_level_dev)
return shrd->dbg_level_dev;
else
return iwlagn_mod_params.debug_level;
}
#else
static inline u32 iwl_get_debug_level(struct iwl_shared *shrd)
{
return iwlagn_mod_params.debug_level;
}
#endif
static inline void iwl_free_pages(struct iwl_shared *shrd, unsigned long page)
{
free_pages(page, shrd->hw_params.rx_page_order);
}
/**
* iwl_queue_inc_wrap - increment queue index, wrap back to beginning
* @index -- current index
* @n_bd -- total number of entries in queue (must be power of 2)
*/
static inline int iwl_queue_inc_wrap(int index, int n_bd)
{
return ++index & (n_bd - 1);
}
/**
* iwl_queue_dec_wrap - decrement queue index, wrap back to end
* @index -- current index
* @n_bd -- total number of entries in queue (must be power of 2)
*/
static inline int iwl_queue_dec_wrap(int index, int n_bd)
{
return --index & (n_bd - 1);
}
struct iwl_rx_mem_buffer {
dma_addr_t page_dma;
struct page *page;
struct list_head list;
};
#define rxb_addr(r) page_address(r->page)
/*
* mac80211 queues, ACs, hardware queues, FIFOs.
*
* Cf. http://wireless.kernel.org/en/developers/Documentation/mac80211/queues
*
* Mac80211 uses the following numbers, which we get as from it
* by way of skb_get_queue_mapping(skb):
*
* VO 0
* VI 1
* BE 2
* BK 3
*
*
* Regular (not A-MPDU) frames are put into hardware queues corresponding
* to the FIFOs, see comments in iwl-prph.h. Aggregated frames get their
* own queue per aggregation session (RA/TID combination), such queues are
* set up to map into FIFOs too, for which we need an AC->FIFO mapping. In
* order to map frames to the right queue, we also need an AC->hw queue
* mapping. This is implemented here.
*
* Due to the way hw queues are set up (by the hw specific modules like
* iwl-4965.c, iwl-5000.c etc.), the AC->hw queue mapping is the identity
* mapping.
*/
static const u8 tid_to_ac[] = {
IEEE80211_AC_BE,
IEEE80211_AC_BK,
IEEE80211_AC_BK,
IEEE80211_AC_BE,
IEEE80211_AC_VI,
IEEE80211_AC_VI,
IEEE80211_AC_VO,
IEEE80211_AC_VO
};
static inline int get_ac_from_tid(u16 tid)
{
if (likely(tid < ARRAY_SIZE(tid_to_ac)))
return tid_to_ac[tid];
/* no support for TIDs 8-15 yet */
return -EINVAL;
}
enum iwl_rxon_context_id {
IWL_RXON_CTX_BSS,
IWL_RXON_CTX_PAN,
NUM_IWL_RXON_CTX
};
int iwl_probe(struct iwl_bus *bus, const struct iwl_trans_ops *trans_ops,
struct iwl_cfg *cfg);
void __devexit iwl_remove(struct iwl_priv * priv);
struct iwl_device_cmd;
int __must_check iwl_rx_dispatch(struct iwl_priv *priv,
struct iwl_rx_mem_buffer *rxb,
struct iwl_device_cmd *cmd);
int iwlagn_hw_valid_rtc_data_addr(u32 addr);
void iwl_set_hw_rfkill_state(struct iwl_priv *priv, bool state);
void iwl_nic_config(struct iwl_priv *priv);
void iwl_free_skb(struct iwl_priv *priv, struct sk_buff *skb);
void iwlagn_fw_error(struct iwl_priv *priv, bool ondemand);
const char *get_cmd_string(u8 cmd);
bool iwl_check_for_ct_kill(struct iwl_priv *priv);
void iwl_stop_sw_queue(struct iwl_priv *priv, u8 ac);
void iwl_wake_sw_queue(struct iwl_priv *priv, u8 ac);
/* notification wait support */
void iwl_abort_notification_waits(struct iwl_shared *shrd);
void __acquires(wait_entry)
iwl_init_notification_wait(struct iwl_shared *shrd,
struct iwl_notification_wait *wait_entry,
u8 cmd,
void (*fn)(struct iwl_trans *trans,
struct iwl_rx_packet *pkt,
void *data),
void *fn_data);
int __must_check __releases(wait_entry)
iwl_wait_notification(struct iwl_shared *shrd,
struct iwl_notification_wait *wait_entry,
unsigned long timeout);
void __releases(wait_entry)
iwl_remove_notification(struct iwl_shared *shrd,
struct iwl_notification_wait *wait_entry);
#ifdef CONFIG_IWLWIFI_DEBUGFS
void iwl_reset_traffic_log(struct iwl_priv *priv);
#endif /* CONFIG_IWLWIFI_DEBUGFS */
#ifdef CONFIG_IWLWIFI_DEBUG
void iwl_print_rx_config_cmd(struct iwl_priv *priv,
enum iwl_rxon_context_id ctxid);
#else
static inline void iwl_print_rx_config_cmd(struct iwl_priv *priv,
enum iwl_rxon_context_id ctxid)
{
}
#endif
#define IWL_CMD(x) case x: return #x
#define IWL_MASK(lo, hi) ((1 << (hi)) | ((1 << (hi)) - (1 << (lo))))
#define IWL_TRAFFIC_ENTRIES (256)
#define IWL_TRAFFIC_ENTRY_SIZE (64)
/*****************************************************
* DRIVER STATUS FUNCTIONS
******************************************************/
#define STATUS_HCMD_ACTIVE 0 /* host command in progress */
/* 1 is unused (used to be STATUS_HCMD_SYNC_ACTIVE) */
#define STATUS_INT_ENABLED 2
#define STATUS_RF_KILL_HW 3
#define STATUS_CT_KILL 4
#define STATUS_INIT 5
#define STATUS_ALIVE 6
#define STATUS_READY 7
#define STATUS_TEMPERATURE 8
#define STATUS_GEO_CONFIGURED 9
#define STATUS_EXIT_PENDING 10
#define STATUS_STATISTICS 12
#define STATUS_SCANNING 13
#define STATUS_SCAN_ABORTING 14
#define STATUS_SCAN_HW 15
#define STATUS_POWER_PMI 16
#define STATUS_FW_ERROR 17
#define STATUS_DEVICE_ENABLED 18
#define STATUS_CHANNEL_SWITCH_PENDING 19
#define STATUS_SCAN_COMPLETE 20
static inline int iwl_is_ready(struct iwl_shared *shrd)
{
/* The adapter is 'ready' if READY and GEO_CONFIGURED bits are
* set but EXIT_PENDING is not */
return test_bit(STATUS_READY, &shrd->status) &&
test_bit(STATUS_GEO_CONFIGURED, &shrd->status) &&
!test_bit(STATUS_EXIT_PENDING, &shrd->status);
}
static inline int iwl_is_alive(struct iwl_shared *shrd)
{
return test_bit(STATUS_ALIVE, &shrd->status);
}
static inline int iwl_is_init(struct iwl_shared *shrd)
{
return test_bit(STATUS_INIT, &shrd->status);
}
static inline int iwl_is_rfkill_hw(struct iwl_shared *shrd)
{
return test_bit(STATUS_RF_KILL_HW, &shrd->status);
}
static inline int iwl_is_rfkill(struct iwl_shared *shrd)
{
return iwl_is_rfkill_hw(shrd);
}
static inline int iwl_is_ctkill(struct iwl_shared *shrd)
{
return test_bit(STATUS_CT_KILL, &shrd->status);
}
static inline int iwl_is_ready_rf(struct iwl_shared *shrd)
{
if (iwl_is_rfkill(shrd))
return 0;
return iwl_is_ready(shrd);
}
#endif /* #__iwl_shared_h__ */
Reference in New Issue View Git Blame Copy Permalink