linux_dsm_epyc7002/drivers/gpu/drm/radeon/evergreen_hdmi.c
Rafał Miłecki d3418eacad drm/radeon/evergreen: setup HDMI before enabling it
Closed source driver fglrx seems to enable infoframes and audio packets
at the end, which makes sense, do the same.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-04-22 10:39:12 -04:00

174 lines
6.6 KiB
C

/*
* Copyright 2008 Advanced Micro Devices, Inc.
* Copyright 2008 Red Hat Inc.
* Copyright 2009 Christian König.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*
* Authors: Christian König
* Rafał Miłecki
*/
#include <linux/hdmi.h>
#include <drm/drmP.h>
#include <drm/radeon_drm.h>
#include "radeon.h"
#include "radeon_asic.h"
#include "evergreend.h"
#include "atom.h"
/*
* update the N and CTS parameters for a given pixel clock rate
*/
static void evergreen_hdmi_update_ACR(struct drm_encoder *encoder, uint32_t clock)
{
struct drm_device *dev = encoder->dev;
struct radeon_device *rdev = dev->dev_private;
struct radeon_hdmi_acr acr = r600_hdmi_acr(clock);
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
uint32_t offset = dig->afmt->offset;
WREG32(HDMI_ACR_32_0 + offset, HDMI_ACR_CTS_32(acr.cts_32khz));
WREG32(HDMI_ACR_32_1 + offset, acr.n_32khz);
WREG32(HDMI_ACR_44_0 + offset, HDMI_ACR_CTS_44(acr.cts_44_1khz));
WREG32(HDMI_ACR_44_1 + offset, acr.n_44_1khz);
WREG32(HDMI_ACR_48_0 + offset, HDMI_ACR_CTS_48(acr.cts_48khz));
WREG32(HDMI_ACR_48_1 + offset, acr.n_48khz);
}
/*
* build a HDMI Video Info Frame
*/
static void evergreen_hdmi_update_avi_infoframe(struct drm_encoder *encoder,
void *buffer, size_t size)
{
struct drm_device *dev = encoder->dev;
struct radeon_device *rdev = dev->dev_private;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
uint32_t offset = dig->afmt->offset;
uint8_t *frame = buffer + 3;
/* Our header values (type, version, length) should be alright, Intel
* is using the same. Checksum function also seems to be OK, it works
* fine for audio infoframe. However calculated value is always lower
* by 2 in comparison to fglrx. It breaks displaying anything in case
* of TVs that strictly check the checksum. Hack it manually here to
* workaround this issue. */
frame[0x0] += 2;
WREG32(AFMT_AVI_INFO0 + offset,
frame[0x0] | (frame[0x1] << 8) | (frame[0x2] << 16) | (frame[0x3] << 24));
WREG32(AFMT_AVI_INFO1 + offset,
frame[0x4] | (frame[0x5] << 8) | (frame[0x6] << 16) | (frame[0x7] << 24));
WREG32(AFMT_AVI_INFO2 + offset,
frame[0x8] | (frame[0x9] << 8) | (frame[0xA] << 16) | (frame[0xB] << 24));
WREG32(AFMT_AVI_INFO3 + offset,
frame[0xC] | (frame[0xD] << 8));
}
/*
* update the info frames with the data from the current display mode
*/
void evergreen_hdmi_setmode(struct drm_encoder *encoder, struct drm_display_mode *mode)
{
struct drm_device *dev = encoder->dev;
struct radeon_device *rdev = dev->dev_private;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
u8 buffer[HDMI_INFOFRAME_HEADER_SIZE + HDMI_AVI_INFOFRAME_SIZE];
struct hdmi_avi_infoframe frame;
uint32_t offset;
ssize_t err;
/* Silent, r600_hdmi_enable will raise WARN for us */
if (!dig->afmt->enabled)
return;
offset = dig->afmt->offset;
r600_audio_set_clock(encoder, mode->clock);
WREG32(HDMI_VBI_PACKET_CONTROL + offset,
HDMI_NULL_SEND); /* send null packets when required */
WREG32(AFMT_AUDIO_CRC_CONTROL + offset, 0x1000);
WREG32(HDMI_AUDIO_PACKET_CONTROL + offset,
HDMI_AUDIO_DELAY_EN(1) | /* set the default audio delay */
HDMI_AUDIO_PACKETS_PER_LINE(3)); /* should be suffient for all audio modes and small enough for all hblanks */
WREG32(AFMT_AUDIO_PACKET_CONTROL + offset,
AFMT_60958_CS_UPDATE); /* allow 60958 channel status fields to be updated */
WREG32(HDMI_ACR_PACKET_CONTROL + offset,
HDMI_ACR_AUTO_SEND | /* allow hw to sent ACR packets when required */
HDMI_ACR_SOURCE); /* select SW CTS value */
WREG32(HDMI_VBI_PACKET_CONTROL + offset,
HDMI_NULL_SEND | /* send null packets when required */
HDMI_GC_SEND | /* send general control packets */
HDMI_GC_CONT); /* send general control packets every frame */
WREG32(HDMI_INFOFRAME_CONTROL0 + offset,
HDMI_AUDIO_INFO_SEND | /* enable audio info frames (frames won't be set until audio is enabled) */
HDMI_AUDIO_INFO_CONT); /* required for audio info values to be updated */
WREG32(AFMT_INFOFRAME_CONTROL0 + offset,
AFMT_AUDIO_INFO_UPDATE); /* required for audio info values to be updated */
WREG32(HDMI_INFOFRAME_CONTROL1 + offset,
HDMI_AUDIO_INFO_LINE(2)); /* anything other than 0 */
WREG32(HDMI_GC + offset, 0); /* unset HDMI_GC_AVMUTE */
err = drm_hdmi_avi_infoframe_from_display_mode(&frame, mode);
if (err < 0) {
DRM_ERROR("failed to setup AVI infoframe: %zd\n", err);
return;
}
err = hdmi_avi_infoframe_pack(&frame, buffer, sizeof(buffer));
if (err < 0) {
DRM_ERROR("failed to pack AVI infoframe: %zd\n", err);
return;
}
evergreen_hdmi_update_avi_infoframe(encoder, buffer, sizeof(buffer));
evergreen_hdmi_update_ACR(encoder, mode->clock);
WREG32_OR(HDMI_INFOFRAME_CONTROL0 + offset,
HDMI_AVI_INFO_SEND | /* enable AVI info frames */
HDMI_AVI_INFO_CONT); /* required for audio info values to be updated */
WREG32_P(HDMI_INFOFRAME_CONTROL1 + offset,
HDMI_AVI_INFO_LINE(2), /* anything other than 0 */
~HDMI_AVI_INFO_LINE_MASK);
WREG32_OR(AFMT_AUDIO_PACKET_CONTROL + offset,
AFMT_AUDIO_SAMPLE_SEND); /* send audio packets */
/* it's unknown what these bits do excatly, but it's indeed quite useful for debugging */
WREG32(AFMT_RAMP_CONTROL0 + offset, 0x00FFFFFF);
WREG32(AFMT_RAMP_CONTROL1 + offset, 0x007FFFFF);
WREG32(AFMT_RAMP_CONTROL2 + offset, 0x00000001);
WREG32(AFMT_RAMP_CONTROL3 + offset, 0x00000001);
}