mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-26 07:55:03 +07:00
c16485ad8e
The LogiCVC display hardware block comes with GPIO capabilities that must be exposed separately from the main driver (as GPIOs) for use with regulators and panels. A syscon is used to share the same regmap across the two drivers. Add a minimalistic GPIO driver to drive these GPIOs, using a syscon regmap when available. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Link: https://lore.kernel.org/r/20191203141243.251058-5-paul.kocialkowski@bootlin.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
171 lines
4.2 KiB
C
171 lines
4.2 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2019 Bootlin
|
|
* Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
|
|
*/
|
|
|
|
#include <linux/err.h>
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/mfd/syscon.h>
|
|
|
|
#define LOGICVC_CTRL_REG 0x40
|
|
#define LOGICVC_CTRL_GPIO_SHIFT 11
|
|
#define LOGICVC_CTRL_GPIO_BITS 5
|
|
|
|
#define LOGICVC_POWER_CTRL_REG 0x78
|
|
#define LOGICVC_POWER_CTRL_GPIO_SHIFT 0
|
|
#define LOGICVC_POWER_CTRL_GPIO_BITS 4
|
|
|
|
struct logicvc_gpio {
|
|
struct gpio_chip chip;
|
|
struct regmap *regmap;
|
|
};
|
|
|
|
static void logicvc_gpio_offset(struct logicvc_gpio *logicvc, unsigned offset,
|
|
unsigned int *reg, unsigned int *bit)
|
|
{
|
|
if (offset >= LOGICVC_CTRL_GPIO_BITS) {
|
|
*reg = LOGICVC_POWER_CTRL_REG;
|
|
|
|
/* To the (virtual) power ctrl offset. */
|
|
offset -= LOGICVC_CTRL_GPIO_BITS;
|
|
/* To the actual bit offset in reg. */
|
|
offset += LOGICVC_POWER_CTRL_GPIO_SHIFT;
|
|
} else {
|
|
*reg = LOGICVC_CTRL_REG;
|
|
|
|
/* To the actual bit offset in reg. */
|
|
offset += LOGICVC_CTRL_GPIO_SHIFT;
|
|
}
|
|
|
|
*bit = BIT(offset);
|
|
}
|
|
|
|
static int logicvc_gpio_get(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct logicvc_gpio *logicvc = gpiochip_get_data(chip);
|
|
unsigned int reg, bit, value;
|
|
int ret;
|
|
|
|
logicvc_gpio_offset(logicvc, offset, ®, &bit);
|
|
|
|
ret = regmap_read(logicvc->regmap, reg, &value);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return !!(value & bit);
|
|
}
|
|
|
|
static void logicvc_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
|
|
{
|
|
struct logicvc_gpio *logicvc = gpiochip_get_data(chip);
|
|
unsigned int reg, bit;
|
|
|
|
logicvc_gpio_offset(logicvc, offset, ®, &bit);
|
|
|
|
regmap_update_bits(logicvc->regmap, reg, bit, value ? bit : 0);
|
|
}
|
|
|
|
static int logicvc_gpio_direction_output(struct gpio_chip *chip,
|
|
unsigned offset, int value)
|
|
{
|
|
/* Pins are always configured as output, so just set the value. */
|
|
logicvc_gpio_set(chip, offset, value);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct regmap_config logicvc_gpio_regmap_config = {
|
|
.reg_bits = 32,
|
|
.val_bits = 32,
|
|
.reg_stride = 4,
|
|
.name = "logicvc-gpio",
|
|
};
|
|
|
|
static int logicvc_gpio_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct device_node *of_node = dev->of_node;
|
|
struct logicvc_gpio *logicvc;
|
|
int ret;
|
|
|
|
logicvc = devm_kzalloc(dev, sizeof(*logicvc), GFP_KERNEL);
|
|
if (!logicvc)
|
|
return -ENOMEM;
|
|
|
|
/* Try to get regmap from parent first. */
|
|
logicvc->regmap = syscon_node_to_regmap(of_node->parent);
|
|
|
|
/* Grab our own regmap if that fails. */
|
|
if (IS_ERR(logicvc->regmap)) {
|
|
struct resource res;
|
|
void __iomem *base;
|
|
|
|
ret = of_address_to_resource(of_node, 0, &res);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to get resource from address\n");
|
|
return ret;
|
|
}
|
|
|
|
base = devm_ioremap_resource(dev, &res);
|
|
if (IS_ERR(base)) {
|
|
dev_err(dev, "Failed to map I/O base\n");
|
|
return PTR_ERR(base);
|
|
}
|
|
|
|
logicvc_gpio_regmap_config.max_register = resource_size(&res) -
|
|
logicvc_gpio_regmap_config.reg_stride;
|
|
|
|
logicvc->regmap =
|
|
devm_regmap_init_mmio(dev, base,
|
|
&logicvc_gpio_regmap_config);
|
|
if (IS_ERR(logicvc->regmap)) {
|
|
dev_err(dev, "Failed to create regmap for I/O\n");
|
|
return PTR_ERR(logicvc->regmap);
|
|
}
|
|
}
|
|
|
|
logicvc->chip.parent = dev;
|
|
logicvc->chip.owner = THIS_MODULE;
|
|
logicvc->chip.label = dev_name(dev);
|
|
logicvc->chip.base = -1;
|
|
logicvc->chip.ngpio = LOGICVC_CTRL_GPIO_BITS +
|
|
LOGICVC_POWER_CTRL_GPIO_BITS;
|
|
logicvc->chip.get = logicvc_gpio_get;
|
|
logicvc->chip.set = logicvc_gpio_set;
|
|
logicvc->chip.direction_output = logicvc_gpio_direction_output;
|
|
|
|
platform_set_drvdata(pdev, logicvc);
|
|
|
|
return devm_gpiochip_add_data(dev, &logicvc->chip, logicvc);
|
|
}
|
|
|
|
static const struct of_device_id logicivc_gpio_of_table[] = {
|
|
{
|
|
.compatible = "xylon,logicvc-3.02.a-gpio",
|
|
},
|
|
{ }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, logicivc_gpio_of_table);
|
|
|
|
static struct platform_driver logicvc_gpio_driver = {
|
|
.driver = {
|
|
.name = "gpio-logicvc",
|
|
.of_match_table = logicivc_gpio_of_table,
|
|
},
|
|
.probe = logicvc_gpio_probe,
|
|
};
|
|
|
|
module_platform_driver(logicvc_gpio_driver);
|
|
|
|
MODULE_AUTHOR("Paul Kocialkowski <paul.kocialkowski@bootlin.com>");
|
|
MODULE_DESCRIPTION("Xylon LogiCVC GPIO driver");
|
|
MODULE_LICENSE("GPL");
|