Greg Kroah-Hartman d30e413fa4 phy: for 5.2 ... *) Add a new *release* phy_ops invoked when the consumer relinquishes PHY that can be used to undo the operation performed in xlate *) Add new driver to support USB2 PHY and shared USB3 + PCIE PHY in Amlogic G12A SoC Family. *) Add new driver to support for Broadcom's Stingray USB PHY (Type 1 has one super speed PHY and one high speed PHY, Type 2 has one high speed PHY) *) Add new driver to support USB PHY in hi3660 SoC of Hisilicon *) Add new driver to support UFS M-PHY in MediaTek SoC *) Add new driver to support XUSB pad controller in Tegra186 SoCs *) Add new driver to support SERDES in TI's AM654 platform *) Add support for generation 2 USB2 PHY and gneration 3 USB2 PHY in r8a77470 to phy-rcar-gen2.c and phy-rcar-gen3-usb2.c respectively *) Add support for PCIe QMP PHY support in msm8998 to phy-qcom-qmp.c *) Add support for SERDES6G in phy-ocelot-serdes.c *) Add support to set drive impedance from device tree in phy-rockchip-emmc.c *) Add support to power up/down the VBUS voltage rail in phy-fsl-imx8mq-usb.c *) Add support to shut off regulators that power UFS during system suspend *) Re-design phy-rcar-gen3-usb2.c to create separate PHY instances for each channel which helps to enable/disable interrupts for each instance independently *) Fix PCIe power up sequence to follow the TRM in order to ensure the DPLL & PHY operates correctly over the entire temperature range. *) Use devm_clk_get_optional to get optional clocks instead of adding custom error checks Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> -----BEGIN PGP SIGNATURE----- iQJCBAABCgAsFiEEUXMr/TfP2p4suIY5Dlx4XIBNgtkFAly+xBgOHGtpc2hvbkB0 aS5jb20ACgkQDlx4XIBNgtn4QQ/+LwamWUGecuhxeq2P7FmXPwIaRnboRKkqGsuv /sQI1QWWx1R8iAhbqtefpmaCfRnMnZwBkwQG71NU8GMHUylz+WhgrD6NW5fkBTS+ CM7GGEtyPyyZYYmR0A7CQbdvOlOD5huNWXXFwleXGfZj0AfehFI5GBebWXd36Pzf g26+q9TZEkTiHuJP/1Xqm87PVpdOpEJLpctfYome1TRBiM5U/63QXOfuFO1LcD3F VdKU/Ls6dWbZElGQynDQpYtQK7YgyjOrrK2dWKCxzLC90IDPGQmbq+hTDzC30YsM 6ePxeoIp3ojla3HGML2uJE9LdQQHsiz6+m64+K3+3uG9Mls04vU2Cp817vFKRkry WNz8obkMzf8h6/smtWTpTXADuFf+sMXJW3d77TxjdwfsnzqjwH3kgVv4HACHtYDf dv89aA3V+z+oW67MqFBydFq7FDOFF9emlGB/ACiWHor98InAM0N/qTFW91NAWNdo HhZHiJd6Vv4ik+V4ajHYcHdfFeXawmsRQNsfNRlABTM0sXFwCvAiPUUU0CaYferd FBrRZilO9XxZf6ybGPvAJiycvtJ3qUJuSVdyOLXckOxpN2L0Zb9CTOrbYDuLuOeE tI81IPkzv0yaHbe0XCssd1aIbhgnoWOM+keLD0rh9+mCWDR6zyD1Kw7WRAfNu2PS HtTZTso= =BAzr -----END PGP SIGNATURE----- Merge tag 'phy-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next Kishon writes: phy: for 5.2 *) Add a new *release* phy_ops invoked when the consumer relinquishes PHY that can be used to undo the operation performed in xlate *) Add new driver to support USB2 PHY and shared USB3 + PCIE PHY in Amlogic G12A SoC Family. *) Add new driver to support for Broadcom's Stingray USB PHY (Type 1 has one super speed PHY and one high speed PHY, Type 2 has one high speed PHY) *) Add new driver to support USB PHY in hi3660 SoC of Hisilicon *) Add new driver to support UFS M-PHY in MediaTek SoC *) Add new driver to support XUSB pad controller in Tegra186 SoCs *) Add new driver to support SERDES in TI's AM654 platform *) Add support for generation 2 USB2 PHY and gneration 3 USB2 PHY in r8a77470 to phy-rcar-gen2.c and phy-rcar-gen3-usb2.c respectively *) Add support for PCIe QMP PHY support in msm8998 to phy-qcom-qmp.c *) Add support for SERDES6G in phy-ocelot-serdes.c *) Add support to set drive impedance from device tree in phy-rockchip-emmc.c *) Add support to power up/down the VBUS voltage rail in phy-fsl-imx8mq-usb.c *) Add support to shut off regulators that power UFS during system suspend *) Re-design phy-rcar-gen3-usb2.c to create separate PHY instances for each channel which helps to enable/disable interrupts for each instance independently *) Fix PCIe power up sequence to follow the TRM in order to ensure the DPLL & PHY operates correctly over the entire temperature range. *) Use devm_clk_get_optional to get optional clocks instead of adding custom error checks Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> * tag 'phy-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy: (51 commits) dt-bindings: phy-qcom-qmp: Tweak qcom,msm8998-qmp-ufs-phy dt-bindings: phy-qcom-qmp: Add qcom,msm8998-qmp-pcie-phy phy: Add usb phy support for hi3660 Soc of Hisilicon dt-bindings: phy: Add support for HiSilicon's hi3660 USB PHY scsi: phy: mediatek: fix typo in author's email address phy: ocelot-serdes: Add support for SERDES6G muxing phy: fsl-imx8mq-usb: add support for VBUS power control dt-bindings: phy-imx8mq-usb: add optional vbus supply regulator phy: qcom-qmp: Add msm8998 PCIe QMP PHY support phy: ti: am654-serdes: Support all clksel values phy: ti: Add a new SERDES driver for TI's AM654x SoC dt-bindings: phy: ti: Add dt binding documentation for SERDES in AM654x SoC phy: core: Invoke pm_runtime_get_*/pm_runtime_put_* before invoking reset callback phy: core: Add *release* phy_ops invoked when the consumer relinquishes PHY phy: phy-meson-gxl-usb2: get optional clock by devm_clk_get_optional() phy: socionext: get optional clock by devm_clk_get_optional() phy: qcom-qusb2: get optional clock by devm_clk_get_optional() phy: phy-mtk-tphy: get optional clock by devm_clk_get_optional() phy: renesas: rcar-gen3-usb2: enable/disable independent irqs phy: renesas: rcar-gen3-usb2: Use pdev's device pointer on dev_vdbg() ...		2019-04-25 10:49:34 +02:00
..
bindings	phy: for 5.2	2019-04-25 10:49:34 +02:00
booting-without-of.txt
changesets.txt
dynamic-resolution-notes.txt	Documentation: remove dynamic-resolution-notes reference to non-existent file	2018-08-13 08:20:10 -06:00
of_unittest.txt
overlay-notes.txt
usage-model.txt
writing-schema.md	dt-bindings: Add a writing DT schemas how-to and annotated example	2018-12-13 09:41:49 -06:00