linux_dsm_epyc7002/drivers/net/ethernet/freescale/fec_ptp.c
Troy Kisky 4ad1ceec05 net: fec: Let fec_ptp have its own interrupt routine
This is better for code locality and should slightly
speed up normal interrupts.

This also allows PPS clock output to start working for
i.mx7. This is because i.mx7 was already using the limit
of 3 interrupts, and needed another.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-08 10:36:11 +09:00

655 lines
18 KiB
C

/*
* Fast Ethernet Controller (ENET) PTP driver for MX6x.
*
* Copyright (C) 2012 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/ptrace.h>
#include <linux/errno.h>
#include <linux/ioport.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/spinlock.h>
#include <linux/workqueue.h>
#include <linux/bitops.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/phy.h>
#include <linux/fec.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_gpio.h>
#include <linux/of_net.h>
#include "fec.h"
/* FEC 1588 register bits */
#define FEC_T_CTRL_SLAVE 0x00002000
#define FEC_T_CTRL_CAPTURE 0x00000800
#define FEC_T_CTRL_RESTART 0x00000200
#define FEC_T_CTRL_PERIOD_RST 0x00000030
#define FEC_T_CTRL_PERIOD_EN 0x00000010
#define FEC_T_CTRL_ENABLE 0x00000001
#define FEC_T_INC_MASK 0x0000007f
#define FEC_T_INC_OFFSET 0
#define FEC_T_INC_CORR_MASK 0x00007f00
#define FEC_T_INC_CORR_OFFSET 8
#define FEC_T_CTRL_PINPER 0x00000080
#define FEC_T_TF0_MASK 0x00000001
#define FEC_T_TF0_OFFSET 0
#define FEC_T_TF1_MASK 0x00000002
#define FEC_T_TF1_OFFSET 1
#define FEC_T_TF2_MASK 0x00000004
#define FEC_T_TF2_OFFSET 2
#define FEC_T_TF3_MASK 0x00000008
#define FEC_T_TF3_OFFSET 3
#define FEC_T_TDRE_MASK 0x00000001
#define FEC_T_TDRE_OFFSET 0
#define FEC_T_TMODE_MASK 0x0000003C
#define FEC_T_TMODE_OFFSET 2
#define FEC_T_TIE_MASK 0x00000040
#define FEC_T_TIE_OFFSET 6
#define FEC_T_TF_MASK 0x00000080
#define FEC_T_TF_OFFSET 7
#define FEC_ATIME_CTRL 0x400
#define FEC_ATIME 0x404
#define FEC_ATIME_EVT_OFFSET 0x408
#define FEC_ATIME_EVT_PERIOD 0x40c
#define FEC_ATIME_CORR 0x410
#define FEC_ATIME_INC 0x414
#define FEC_TS_TIMESTAMP 0x418
#define FEC_TGSR 0x604
#define FEC_TCSR(n) (0x608 + n * 0x08)
#define FEC_TCCR(n) (0x60C + n * 0x08)
#define MAX_TIMER_CHANNEL 3
#define FEC_TMODE_TOGGLE 0x05
#define FEC_HIGH_PULSE 0x0F
#define FEC_CC_MULT (1 << 31)
#define FEC_COUNTER_PERIOD (1 << 31)
#define PPS_OUPUT_RELOAD_PERIOD NSEC_PER_SEC
#define FEC_CHANNLE_0 0
#define DEFAULT_PPS_CHANNEL FEC_CHANNLE_0
/**
* fec_ptp_enable_pps
* @fep: the fec_enet_private structure handle
* @enable: enable the channel pps output
*
* This function enble the PPS ouput on the timer channel.
*/
static int fec_ptp_enable_pps(struct fec_enet_private *fep, uint enable)
{
unsigned long flags;
u32 val, tempval;
int inc;
struct timespec64 ts;
u64 ns;
val = 0;
if (!(fep->hwts_tx_en || fep->hwts_rx_en)) {
dev_err(&fep->pdev->dev, "No ptp stack is running\n");
return -EINVAL;
}
if (fep->pps_enable == enable)
return 0;
fep->pps_channel = DEFAULT_PPS_CHANNEL;
fep->reload_period = PPS_OUPUT_RELOAD_PERIOD;
inc = fep->ptp_inc;
spin_lock_irqsave(&fep->tmreg_lock, flags);
if (enable) {
/* clear capture or output compare interrupt status if have.
*/
writel(FEC_T_TF_MASK, fep->hwp + FEC_TCSR(fep->pps_channel));
/* It is recommended to double check the TMODE field in the
* TCSR register to be cleared before the first compare counter
* is written into TCCR register. Just add a double check.
*/
val = readl(fep->hwp + FEC_TCSR(fep->pps_channel));
do {
val &= ~(FEC_T_TMODE_MASK);
writel(val, fep->hwp + FEC_TCSR(fep->pps_channel));
val = readl(fep->hwp + FEC_TCSR(fep->pps_channel));
} while (val & FEC_T_TMODE_MASK);
/* Dummy read counter to update the counter */
timecounter_read(&fep->tc);
/* We want to find the first compare event in the next
* second point. So we need to know what the ptp time
* is now and how many nanoseconds is ahead to get next second.
* The remaining nanosecond ahead before the next second would be
* NSEC_PER_SEC - ts.tv_nsec. Add the remaining nanoseconds
* to current timer would be next second.
*/
tempval = readl(fep->hwp + FEC_ATIME_CTRL);
tempval |= FEC_T_CTRL_CAPTURE;
writel(tempval, fep->hwp + FEC_ATIME_CTRL);
tempval = readl(fep->hwp + FEC_ATIME);
/* Convert the ptp local counter to 1588 timestamp */
ns = timecounter_cyc2time(&fep->tc, tempval);
ts = ns_to_timespec64(ns);
/* The tempval is less than 3 seconds, and so val is less than
* 4 seconds. No overflow for 32bit calculation.
*/
val = NSEC_PER_SEC - (u32)ts.tv_nsec + tempval;
/* Need to consider the situation that the current time is
* very close to the second point, which means NSEC_PER_SEC
* - ts.tv_nsec is close to be zero(For example 20ns); Since the timer
* is still running when we calculate the first compare event, it is
* possible that the remaining nanoseonds run out before the compare
* counter is calculated and written into TCCR register. To avoid
* this possibility, we will set the compare event to be the next
* of next second. The current setting is 31-bit timer and wrap
* around over 2 seconds. So it is okay to set the next of next
* seond for the timer.
*/
val += NSEC_PER_SEC;
/* We add (2 * NSEC_PER_SEC - (u32)ts.tv_nsec) to current
* ptp counter, which maybe cause 32-bit wrap. Since the
* (NSEC_PER_SEC - (u32)ts.tv_nsec) is less than 2 second.
* We can ensure the wrap will not cause issue. If the offset
* is bigger than fep->cc.mask would be a error.
*/
val &= fep->cc.mask;
writel(val, fep->hwp + FEC_TCCR(fep->pps_channel));
/* Calculate the second the compare event timestamp */
fep->next_counter = (val + fep->reload_period) & fep->cc.mask;
/* * Enable compare event when overflow */
val = readl(fep->hwp + FEC_ATIME_CTRL);
val |= FEC_T_CTRL_PINPER;
writel(val, fep->hwp + FEC_ATIME_CTRL);
/* Compare channel setting. */
val = readl(fep->hwp + FEC_TCSR(fep->pps_channel));
val |= (1 << FEC_T_TF_OFFSET | 1 << FEC_T_TIE_OFFSET);
val &= ~(1 << FEC_T_TDRE_OFFSET);
val &= ~(FEC_T_TMODE_MASK);
val |= (FEC_HIGH_PULSE << FEC_T_TMODE_OFFSET);
writel(val, fep->hwp + FEC_TCSR(fep->pps_channel));
/* Write the second compare event timestamp and calculate
* the third timestamp. Refer the TCCR register detail in the spec.
*/
writel(fep->next_counter, fep->hwp + FEC_TCCR(fep->pps_channel));
fep->next_counter = (fep->next_counter + fep->reload_period) & fep->cc.mask;
} else {
writel(0, fep->hwp + FEC_TCSR(fep->pps_channel));
}
fep->pps_enable = enable;
spin_unlock_irqrestore(&fep->tmreg_lock, flags);
return 0;
}
/**
* fec_ptp_read - read raw cycle counter (to be used by time counter)
* @cc: the cyclecounter structure
*
* this function reads the cyclecounter registers and is called by the
* cyclecounter structure used to construct a ns counter from the
* arbitrary fixed point registers
*/
static u64 fec_ptp_read(const struct cyclecounter *cc)
{
struct fec_enet_private *fep =
container_of(cc, struct fec_enet_private, cc);
const struct platform_device_id *id_entry =
platform_get_device_id(fep->pdev);
u32 tempval;
tempval = readl(fep->hwp + FEC_ATIME_CTRL);
tempval |= FEC_T_CTRL_CAPTURE;
writel(tempval, fep->hwp + FEC_ATIME_CTRL);
if (id_entry->driver_data & FEC_QUIRK_BUG_CAPTURE)
udelay(1);
return readl(fep->hwp + FEC_ATIME);
}
/**
* fec_ptp_start_cyclecounter - create the cycle counter from hw
* @ndev: network device
*
* this function initializes the timecounter and cyclecounter
* structures for use in generated a ns counter from the arbitrary
* fixed point cycles registers in the hardware.
*/
void fec_ptp_start_cyclecounter(struct net_device *ndev)
{
struct fec_enet_private *fep = netdev_priv(ndev);
unsigned long flags;
int inc;
inc = 1000000000 / fep->cycle_speed;
/* grab the ptp lock */
spin_lock_irqsave(&fep->tmreg_lock, flags);
/* 1ns counter */
writel(inc << FEC_T_INC_OFFSET, fep->hwp + FEC_ATIME_INC);
/* use 31-bit timer counter */
writel(FEC_COUNTER_PERIOD, fep->hwp + FEC_ATIME_EVT_PERIOD);
writel(FEC_T_CTRL_ENABLE | FEC_T_CTRL_PERIOD_RST,
fep->hwp + FEC_ATIME_CTRL);
memset(&fep->cc, 0, sizeof(fep->cc));
fep->cc.read = fec_ptp_read;
fep->cc.mask = CLOCKSOURCE_MASK(31);
fep->cc.shift = 31;
fep->cc.mult = FEC_CC_MULT;
/* reset the ns time counter */
timecounter_init(&fep->tc, &fep->cc, ktime_to_ns(ktime_get_real()));
spin_unlock_irqrestore(&fep->tmreg_lock, flags);
}
/**
* fec_ptp_adjfreq - adjust ptp cycle frequency
* @ptp: the ptp clock structure
* @ppb: parts per billion adjustment from base
*
* Adjust the frequency of the ptp cycle counter by the
* indicated ppb from the base frequency.
*
* Because ENET hardware frequency adjust is complex,
* using software method to do that.
*/
static int fec_ptp_adjfreq(struct ptp_clock_info *ptp, s32 ppb)
{
unsigned long flags;
int neg_adj = 0;
u32 i, tmp;
u32 corr_inc, corr_period;
u32 corr_ns;
u64 lhs, rhs;
struct fec_enet_private *fep =
container_of(ptp, struct fec_enet_private, ptp_caps);
if (ppb == 0)
return 0;
if (ppb < 0) {
ppb = -ppb;
neg_adj = 1;
}
/* In theory, corr_inc/corr_period = ppb/NSEC_PER_SEC;
* Try to find the corr_inc between 1 to fep->ptp_inc to
* meet adjustment requirement.
*/
lhs = NSEC_PER_SEC;
rhs = (u64)ppb * (u64)fep->ptp_inc;
for (i = 1; i <= fep->ptp_inc; i++) {
if (lhs >= rhs) {
corr_inc = i;
corr_period = div_u64(lhs, rhs);
break;
}
lhs += NSEC_PER_SEC;
}
/* Not found? Set it to high value - double speed
* correct in every clock step.
*/
if (i > fep->ptp_inc) {
corr_inc = fep->ptp_inc;
corr_period = 1;
}
if (neg_adj)
corr_ns = fep->ptp_inc - corr_inc;
else
corr_ns = fep->ptp_inc + corr_inc;
spin_lock_irqsave(&fep->tmreg_lock, flags);
tmp = readl(fep->hwp + FEC_ATIME_INC) & FEC_T_INC_MASK;
tmp |= corr_ns << FEC_T_INC_CORR_OFFSET;
writel(tmp, fep->hwp + FEC_ATIME_INC);
corr_period = corr_period > 1 ? corr_period - 1 : corr_period;
writel(corr_period, fep->hwp + FEC_ATIME_CORR);
/* dummy read to update the timer. */
timecounter_read(&fep->tc);
spin_unlock_irqrestore(&fep->tmreg_lock, flags);
return 0;
}
/**
* fec_ptp_adjtime
* @ptp: the ptp clock structure
* @delta: offset to adjust the cycle counter by
*
* adjust the timer by resetting the timecounter structure.
*/
static int fec_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta)
{
struct fec_enet_private *fep =
container_of(ptp, struct fec_enet_private, ptp_caps);
unsigned long flags;
spin_lock_irqsave(&fep->tmreg_lock, flags);
timecounter_adjtime(&fep->tc, delta);
spin_unlock_irqrestore(&fep->tmreg_lock, flags);
return 0;
}
/**
* fec_ptp_gettime
* @ptp: the ptp clock structure
* @ts: timespec structure to hold the current time value
*
* read the timecounter and return the correct value on ns,
* after converting it into a struct timespec.
*/
static int fec_ptp_gettime(struct ptp_clock_info *ptp, struct timespec64 *ts)
{
struct fec_enet_private *adapter =
container_of(ptp, struct fec_enet_private, ptp_caps);
u64 ns;
unsigned long flags;
spin_lock_irqsave(&adapter->tmreg_lock, flags);
ns = timecounter_read(&adapter->tc);
spin_unlock_irqrestore(&adapter->tmreg_lock, flags);
*ts = ns_to_timespec64(ns);
return 0;
}
/**
* fec_ptp_settime
* @ptp: the ptp clock structure
* @ts: the timespec containing the new time for the cycle counter
*
* reset the timecounter to use a new base value instead of the kernel
* wall timer value.
*/
static int fec_ptp_settime(struct ptp_clock_info *ptp,
const struct timespec64 *ts)
{
struct fec_enet_private *fep =
container_of(ptp, struct fec_enet_private, ptp_caps);
u64 ns;
unsigned long flags;
u32 counter;
mutex_lock(&fep->ptp_clk_mutex);
/* Check the ptp clock */
if (!fep->ptp_clk_on) {
mutex_unlock(&fep->ptp_clk_mutex);
return -EINVAL;
}
ns = timespec64_to_ns(ts);
/* Get the timer value based on timestamp.
* Update the counter with the masked value.
*/
counter = ns & fep->cc.mask;
spin_lock_irqsave(&fep->tmreg_lock, flags);
writel(counter, fep->hwp + FEC_ATIME);
timecounter_init(&fep->tc, &fep->cc, ns);
spin_unlock_irqrestore(&fep->tmreg_lock, flags);
mutex_unlock(&fep->ptp_clk_mutex);
return 0;
}
/**
* fec_ptp_enable
* @ptp: the ptp clock structure
* @rq: the requested feature to change
* @on: whether to enable or disable the feature
*
*/
static int fec_ptp_enable(struct ptp_clock_info *ptp,
struct ptp_clock_request *rq, int on)
{
struct fec_enet_private *fep =
container_of(ptp, struct fec_enet_private, ptp_caps);
int ret = 0;
if (rq->type == PTP_CLK_REQ_PPS) {
ret = fec_ptp_enable_pps(fep, on);
return ret;
}
return -EOPNOTSUPP;
}
/**
* fec_ptp_hwtstamp_ioctl - control hardware time stamping
* @ndev: pointer to net_device
* @ifreq: ioctl data
* @cmd: particular ioctl requested
*/
int fec_ptp_set(struct net_device *ndev, struct ifreq *ifr)
{
struct fec_enet_private *fep = netdev_priv(ndev);
struct hwtstamp_config config;
if (copy_from_user(&config, ifr->ifr_data, sizeof(config)))
return -EFAULT;
/* reserved for future extensions */
if (config.flags)
return -EINVAL;
switch (config.tx_type) {
case HWTSTAMP_TX_OFF:
fep->hwts_tx_en = 0;
break;
case HWTSTAMP_TX_ON:
fep->hwts_tx_en = 1;
break;
default:
return -ERANGE;
}
switch (config.rx_filter) {
case HWTSTAMP_FILTER_NONE:
if (fep->hwts_rx_en)
fep->hwts_rx_en = 0;
config.rx_filter = HWTSTAMP_FILTER_NONE;
break;
default:
fep->hwts_rx_en = 1;
config.rx_filter = HWTSTAMP_FILTER_ALL;
break;
}
return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ?
-EFAULT : 0;
}
int fec_ptp_get(struct net_device *ndev, struct ifreq *ifr)
{
struct fec_enet_private *fep = netdev_priv(ndev);
struct hwtstamp_config config;
config.flags = 0;
config.tx_type = fep->hwts_tx_en ? HWTSTAMP_TX_ON : HWTSTAMP_TX_OFF;
config.rx_filter = (fep->hwts_rx_en ?
HWTSTAMP_FILTER_ALL : HWTSTAMP_FILTER_NONE);
return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ?
-EFAULT : 0;
}
/**
* fec_time_keep - call timecounter_read every second to avoid timer overrun
* because ENET just support 32bit counter, will timeout in 4s
*/
static void fec_time_keep(struct work_struct *work)
{
struct delayed_work *dwork = to_delayed_work(work);
struct fec_enet_private *fep = container_of(dwork, struct fec_enet_private, time_keep);
u64 ns;
unsigned long flags;
mutex_lock(&fep->ptp_clk_mutex);
if (fep->ptp_clk_on) {
spin_lock_irqsave(&fep->tmreg_lock, flags);
ns = timecounter_read(&fep->tc);
spin_unlock_irqrestore(&fep->tmreg_lock, flags);
}
mutex_unlock(&fep->ptp_clk_mutex);
schedule_delayed_work(&fep->time_keep, HZ);
}
/* This function checks the pps event and reloads the timer compare counter. */
static irqreturn_t fec_pps_interrupt(int irq, void *dev_id)
{
struct net_device *ndev = dev_id;
struct fec_enet_private *fep = netdev_priv(ndev);
u32 val;
u8 channel = fep->pps_channel;
struct ptp_clock_event event;
val = readl(fep->hwp + FEC_TCSR(channel));
if (val & FEC_T_TF_MASK) {
/* Write the next next compare(not the next according the spec)
* value to the register
*/
writel(fep->next_counter, fep->hwp + FEC_TCCR(channel));
do {
writel(val, fep->hwp + FEC_TCSR(channel));
} while (readl(fep->hwp + FEC_TCSR(channel)) & FEC_T_TF_MASK);
/* Update the counter; */
fep->next_counter = (fep->next_counter + fep->reload_period) &
fep->cc.mask;
event.type = PTP_CLOCK_PPS;
ptp_clock_event(fep->ptp_clock, &event);
return IRQ_HANDLED;
}
return IRQ_NONE;
}
/**
* fec_ptp_init
* @ndev: The FEC network adapter
*
* This function performs the required steps for enabling ptp
* support. If ptp support has already been loaded it simply calls the
* cyclecounter init routine and exits.
*/
void fec_ptp_init(struct platform_device *pdev, int irq_idx)
{
struct net_device *ndev = platform_get_drvdata(pdev);
struct fec_enet_private *fep = netdev_priv(ndev);
int irq;
int ret;
fep->ptp_caps.owner = THIS_MODULE;
snprintf(fep->ptp_caps.name, 16, "fec ptp");
fep->ptp_caps.max_adj = 250000000;
fep->ptp_caps.n_alarm = 0;
fep->ptp_caps.n_ext_ts = 0;
fep->ptp_caps.n_per_out = 0;
fep->ptp_caps.n_pins = 0;
fep->ptp_caps.pps = 1;
fep->ptp_caps.adjfreq = fec_ptp_adjfreq;
fep->ptp_caps.adjtime = fec_ptp_adjtime;
fep->ptp_caps.gettime64 = fec_ptp_gettime;
fep->ptp_caps.settime64 = fec_ptp_settime;
fep->ptp_caps.enable = fec_ptp_enable;
fep->cycle_speed = clk_get_rate(fep->clk_ptp);
fep->ptp_inc = NSEC_PER_SEC / fep->cycle_speed;
spin_lock_init(&fep->tmreg_lock);
fec_ptp_start_cyclecounter(ndev);
INIT_DELAYED_WORK(&fep->time_keep, fec_time_keep);
irq = platform_get_irq_byname(pdev, "pps");
if (irq < 0)
irq = platform_get_irq(pdev, irq_idx);
/* Failure to get an irq is not fatal,
* only the PTP_CLOCK_PPS clock events should stop
*/
if (irq >= 0) {
ret = devm_request_irq(&pdev->dev, irq, fec_pps_interrupt,
0, pdev->name, ndev);
if (ret < 0)
dev_warn(&pdev->dev, "request for pps irq failed(%d)\n",
ret);
}
fep->ptp_clock = ptp_clock_register(&fep->ptp_caps, &pdev->dev);
if (IS_ERR(fep->ptp_clock)) {
fep->ptp_clock = NULL;
pr_err("ptp_clock_register failed\n");
}
schedule_delayed_work(&fep->time_keep, HZ);
}
void fec_ptp_stop(struct platform_device *pdev)
{
struct net_device *ndev = platform_get_drvdata(pdev);
struct fec_enet_private *fep = netdev_priv(ndev);
cancel_delayed_work_sync(&fep->time_keep);
if (fep->ptp_clock)
ptp_clock_unregister(fep->ptp_clock);
}