mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-23 13:53:54 +07:00
99a0d9f5e8
Core changes: - Expose pull up/down flags for the GPIO character device to userspace. After clear input from the RaspberryPi and Beagle communities, it has been established that prototyping, industrial automation and make communities strongly need this feature, and as we want people to use the character device, we have implemented the simple pull up/down interface for GPIO lines. This means we can specify that a (chip-specific) pull up/down resistor can be enabled, but does not offer fine-grained control such as cases where the resistance of the same pull resistor can be controlled (yet). - Introduce devm_fwnode_gpiod_get_index() and start to phase out the old symbol devm_fwnode_get_index_gpiod_from_child(). - A bit of documentation clean-up work. - Introduce a define for GPIO line directions and deploy it in all GPIO drivers in the drivers/gpio directory. - Add a special callback to populate pin ranges when cooperating with the pin control subsystem and registering ranges as part of adding a gpiolib driver and a gpio_irq_chip driver at the same time. This is also deployed in the Intel Merrifield driver. New drivers: - RDA Micro GPIO controller. - XGS-iproc GPIO driver. Driver improvements: - Wake event and debounce support on the Tegra 186 driver. - Finalize the Aspeed SGPIO driver. - MPC8xxx uses a normal IRQ handler rather than a chained handler. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAl3hIDcACgkQQRCzN7AZ XXOOyw/8DcaBV6j3EZPDS+b+N74/flNf9JitdJRCtUPn8mjdm+uKNPxbtL/znZc8 zd3rlpiZOqHy8klB3gOPJsJhgXY9QX/b+F5j8fHZvu0DACugRndCqMJ7wrgwUiPn 2ni6KJmz6z5urhcfaAIgyinTWOMegvSVfqjISaUCRCAg3F9dIeQoulRvTPk2ybvv f31jAGemGbvvQPpd81SYCxuTbMg+jxBIgnOCaX+VmUaBLzh8J2W4It3Myp6M4Sbg Td6QU4b2J2Q0quk/Dc7c4saT+qRODkg2syPKV2YqmWwdLRDxZyKESMdkCXLWlWJU fP+KZ4lDxhCaOAYUrY2sEAYMw4E8MzrfeWikdIe0nk0DWqNQhWvDyzsNsB90XGFb aGgeCPH2W1MdE6usPhLidBaHbLeowzndw5BiEl0UCJUqz7tzTCd5iMIAhoSU/Sr5 ymO8J45G9rdx5pscA3cXhpR/PmqaETYQ/uNrLuxTdI4F4xY12+M0vPrV8z3oDPxB U/uL0v6HndDcFAavQQiMd9eL6Hocirnn+Z2xFut3nOznHY96ozXSnZb3lzvH/kqI Du2C8geboVcZsiZJTKVN1zxnfIA8oDauzTOEpGFbIGFhmy0zt4RRRptL4W8NxeFm KCOk/HqlGeuqJ49epta3mqhUC0MSASA9fdicCdiDqvw+puEznwU= =o13I -----END PGP SIGNATURE----- Merge tag 'gpio-v5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v5.5 kernel cycle Core changes: - Expose pull up/down flags for the GPIO character device to userspace. After clear input from the RaspberryPi and Beagle communities, it has been established that prototyping, industrial automation and make communities strongly need this feature, and as we want people to use the character device, we have implemented the simple pull up/down interface for GPIO lines. This means we can specify that a (chip-specific) pull up/down resistor can be enabled, but does not offer fine-grained control such as cases where the resistance of the same pull resistor can be controlled (yet). - Introduce devm_fwnode_gpiod_get_index() and start to phase out the old symbol devm_fwnode_get_index_gpiod_from_child(). - A bit of documentation clean-up work. - Introduce a define for GPIO line directions and deploy it in all GPIO drivers in the drivers/gpio directory. - Add a special callback to populate pin ranges when cooperating with the pin control subsystem and registering ranges as part of adding a gpiolib driver and a gpio_irq_chip driver at the same time. This is also deployed in the Intel Merrifield driver. New drivers: - RDA Micro GPIO controller. - XGS-iproc GPIO driver. Driver improvements: - Wake event and debounce support on the Tegra 186 driver. - Finalize the Aspeed SGPIO driver. - MPC8xxx uses a normal IRQ handler rather than a chained handler" * tag 'gpio-v5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (64 commits) gpio: Add TODO item for regmap helper Documentation: gpio: driver.rst: Fix warnings gpio: of: Fix bogus reference to gpiod_get_count() gpiolib: Grammar s/manager/managed/ gpio: lynxpoint: Setup correct IRQ handlers MAINTAINERS: Replace my email by one @kernel.org gpiolib: acpi: Make acpi_gpiochip_alloc_event always return AE_OK gpio/mpc8xxx: fix qoriq GPIO reading gpio: mpc8xxx: Don't overwrite default irq_set_type callback gpiolib: acpi: Print pin number on acpi_gpiochip_alloc_event errors gpiolib: fix coding style in gpiod_hog() drm/bridge: ti-tfp410: switch to using fwnode_gpiod_get_index() gpio: merrifield: Pass irqchip when adding gpiochip gpio: merrifield: Add GPIO <-> pin mapping ranges via callback gpiolib: Introduce ->add_pin_ranges() callback gpio: mmio: remove untrue leftover comment gpio: em: Use platform_get_irq() to obtain interrupts gpio: tegra186: Add debounce support gpio: tegra186: Program interrupt route mapping gpio: tegra186: Derive register offsets from bank/port ...
1353 lines
34 KiB
C
1353 lines
34 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* ACPI helpers for GPIO API
|
|
*
|
|
* Copyright (C) 2012, Intel Corporation
|
|
* Authors: Mathias Nyman <mathias.nyman@linux.intel.com>
|
|
* Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
*/
|
|
|
|
#include <linux/dmi.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/gpio/machine.h>
|
|
#include <linux/export.h>
|
|
#include <linux/acpi.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/pinctrl/pinctrl.h>
|
|
|
|
#include "gpiolib.h"
|
|
#include "gpiolib-acpi.h"
|
|
|
|
static int run_edge_events_on_boot = -1;
|
|
module_param(run_edge_events_on_boot, int, 0444);
|
|
MODULE_PARM_DESC(run_edge_events_on_boot,
|
|
"Run edge _AEI event-handlers at boot: 0=no, 1=yes, -1=auto");
|
|
|
|
/**
|
|
* struct acpi_gpio_event - ACPI GPIO event handler data
|
|
*
|
|
* @node: list-entry of the events list of the struct acpi_gpio_chip
|
|
* @handle: handle of ACPI method to execute when the IRQ triggers
|
|
* @handler: handler function to pass to request_irq() when requesting the IRQ
|
|
* @pin: GPIO pin number on the struct gpio_chip
|
|
* @irq: Linux IRQ number for the event, for request_irq() / free_irq()
|
|
* @irqflags: flags to pass to request_irq() when requesting the IRQ
|
|
* @irq_is_wake: If the ACPI flags indicate the IRQ is a wakeup source
|
|
* @irq_requested:True if request_irq() has been done
|
|
* @desc: struct gpio_desc for the GPIO pin for this event
|
|
*/
|
|
struct acpi_gpio_event {
|
|
struct list_head node;
|
|
acpi_handle handle;
|
|
irq_handler_t handler;
|
|
unsigned int pin;
|
|
unsigned int irq;
|
|
unsigned long irqflags;
|
|
bool irq_is_wake;
|
|
bool irq_requested;
|
|
struct gpio_desc *desc;
|
|
};
|
|
|
|
struct acpi_gpio_connection {
|
|
struct list_head node;
|
|
unsigned int pin;
|
|
struct gpio_desc *desc;
|
|
};
|
|
|
|
struct acpi_gpio_chip {
|
|
/*
|
|
* ACPICA requires that the first field of the context parameter
|
|
* passed to acpi_install_address_space_handler() is large enough
|
|
* to hold struct acpi_connection_info.
|
|
*/
|
|
struct acpi_connection_info conn_info;
|
|
struct list_head conns;
|
|
struct mutex conn_lock;
|
|
struct gpio_chip *chip;
|
|
struct list_head events;
|
|
struct list_head deferred_req_irqs_list_entry;
|
|
};
|
|
|
|
/*
|
|
* For GPIO chips which call acpi_gpiochip_request_interrupts() before late_init
|
|
* (so builtin drivers) we register the ACPI GpioInt IRQ handlers from a
|
|
* late_initcall_sync() handler, so that other builtin drivers can register their
|
|
* OpRegions before the event handlers can run. This list contains GPIO chips
|
|
* for which the acpi_gpiochip_request_irqs() call has been deferred.
|
|
*/
|
|
static DEFINE_MUTEX(acpi_gpio_deferred_req_irqs_lock);
|
|
static LIST_HEAD(acpi_gpio_deferred_req_irqs_list);
|
|
static bool acpi_gpio_deferred_req_irqs_done;
|
|
|
|
static int acpi_gpiochip_find(struct gpio_chip *gc, void *data)
|
|
{
|
|
if (!gc->parent)
|
|
return false;
|
|
|
|
return ACPI_HANDLE(gc->parent) == data;
|
|
}
|
|
|
|
/**
|
|
* acpi_get_gpiod() - Translate ACPI GPIO pin to GPIO descriptor usable with GPIO API
|
|
* @path: ACPI GPIO controller full path name, (e.g. "\\_SB.GPO1")
|
|
* @pin: ACPI GPIO pin number (0-based, controller-relative)
|
|
*
|
|
* Return: GPIO descriptor to use with Linux generic GPIO API, or ERR_PTR
|
|
* error value. Specifically returns %-EPROBE_DEFER if the referenced GPIO
|
|
* controller does not have GPIO chip registered at the moment. This is to
|
|
* support probe deferral.
|
|
*/
|
|
static struct gpio_desc *acpi_get_gpiod(char *path, int pin)
|
|
{
|
|
struct gpio_chip *chip;
|
|
acpi_handle handle;
|
|
acpi_status status;
|
|
|
|
status = acpi_get_handle(NULL, path, &handle);
|
|
if (ACPI_FAILURE(status))
|
|
return ERR_PTR(-ENODEV);
|
|
|
|
chip = gpiochip_find(handle, acpi_gpiochip_find);
|
|
if (!chip)
|
|
return ERR_PTR(-EPROBE_DEFER);
|
|
|
|
return gpiochip_get_desc(chip, pin);
|
|
}
|
|
|
|
static irqreturn_t acpi_gpio_irq_handler(int irq, void *data)
|
|
{
|
|
struct acpi_gpio_event *event = data;
|
|
|
|
acpi_evaluate_object(event->handle, NULL, NULL, NULL);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t acpi_gpio_irq_handler_evt(int irq, void *data)
|
|
{
|
|
struct acpi_gpio_event *event = data;
|
|
|
|
acpi_execute_simple_method(event->handle, NULL, event->pin);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void acpi_gpio_chip_dh(acpi_handle handle, void *data)
|
|
{
|
|
/* The address of this function is used as a key. */
|
|
}
|
|
|
|
bool acpi_gpio_get_irq_resource(struct acpi_resource *ares,
|
|
struct acpi_resource_gpio **agpio)
|
|
{
|
|
struct acpi_resource_gpio *gpio;
|
|
|
|
if (ares->type != ACPI_RESOURCE_TYPE_GPIO)
|
|
return false;
|
|
|
|
gpio = &ares->data.gpio;
|
|
if (gpio->connection_type != ACPI_RESOURCE_GPIO_TYPE_INT)
|
|
return false;
|
|
|
|
*agpio = gpio;
|
|
return true;
|
|
}
|
|
EXPORT_SYMBOL_GPL(acpi_gpio_get_irq_resource);
|
|
|
|
static void acpi_gpiochip_request_irq(struct acpi_gpio_chip *acpi_gpio,
|
|
struct acpi_gpio_event *event)
|
|
{
|
|
int ret, value;
|
|
|
|
ret = request_threaded_irq(event->irq, NULL, event->handler,
|
|
event->irqflags, "ACPI:Event", event);
|
|
if (ret) {
|
|
dev_err(acpi_gpio->chip->parent,
|
|
"Failed to setup interrupt handler for %d\n",
|
|
event->irq);
|
|
return;
|
|
}
|
|
|
|
if (event->irq_is_wake)
|
|
enable_irq_wake(event->irq);
|
|
|
|
event->irq_requested = true;
|
|
|
|
/* Make sure we trigger the initial state of edge-triggered IRQs */
|
|
if (run_edge_events_on_boot &&
|
|
(event->irqflags & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING))) {
|
|
value = gpiod_get_raw_value_cansleep(event->desc);
|
|
if (((event->irqflags & IRQF_TRIGGER_RISING) && value == 1) ||
|
|
((event->irqflags & IRQF_TRIGGER_FALLING) && value == 0))
|
|
event->handler(event->irq, event);
|
|
}
|
|
}
|
|
|
|
static void acpi_gpiochip_request_irqs(struct acpi_gpio_chip *acpi_gpio)
|
|
{
|
|
struct acpi_gpio_event *event;
|
|
|
|
list_for_each_entry(event, &acpi_gpio->events, node)
|
|
acpi_gpiochip_request_irq(acpi_gpio, event);
|
|
}
|
|
|
|
/* Always returns AE_OK so that we keep looping over the resources */
|
|
static acpi_status acpi_gpiochip_alloc_event(struct acpi_resource *ares,
|
|
void *context)
|
|
{
|
|
struct acpi_gpio_chip *acpi_gpio = context;
|
|
struct gpio_chip *chip = acpi_gpio->chip;
|
|
struct acpi_resource_gpio *agpio;
|
|
acpi_handle handle, evt_handle;
|
|
struct acpi_gpio_event *event;
|
|
irq_handler_t handler = NULL;
|
|
struct gpio_desc *desc;
|
|
int ret, pin, irq;
|
|
|
|
if (!acpi_gpio_get_irq_resource(ares, &agpio))
|
|
return AE_OK;
|
|
|
|
handle = ACPI_HANDLE(chip->parent);
|
|
pin = agpio->pin_table[0];
|
|
|
|
if (pin <= 255) {
|
|
char ev_name[5];
|
|
sprintf(ev_name, "_%c%02hhX",
|
|
agpio->triggering == ACPI_EDGE_SENSITIVE ? 'E' : 'L',
|
|
pin);
|
|
if (ACPI_SUCCESS(acpi_get_handle(handle, ev_name, &evt_handle)))
|
|
handler = acpi_gpio_irq_handler;
|
|
}
|
|
if (!handler) {
|
|
if (ACPI_SUCCESS(acpi_get_handle(handle, "_EVT", &evt_handle)))
|
|
handler = acpi_gpio_irq_handler_evt;
|
|
}
|
|
if (!handler)
|
|
return AE_OK;
|
|
|
|
desc = gpiochip_request_own_desc(chip, pin, "ACPI:Event",
|
|
GPIO_ACTIVE_HIGH, GPIOD_IN);
|
|
if (IS_ERR(desc)) {
|
|
dev_err(chip->parent,
|
|
"Failed to request GPIO for pin 0x%04X, err %ld\n",
|
|
pin, PTR_ERR(desc));
|
|
return AE_OK;
|
|
}
|
|
|
|
ret = gpiochip_lock_as_irq(chip, pin);
|
|
if (ret) {
|
|
dev_err(chip->parent,
|
|
"Failed to lock GPIO pin 0x%04X as interrupt, err %d\n",
|
|
pin, ret);
|
|
goto fail_free_desc;
|
|
}
|
|
|
|
irq = gpiod_to_irq(desc);
|
|
if (irq < 0) {
|
|
dev_err(chip->parent,
|
|
"Failed to translate GPIO pin 0x%04X to IRQ, err %d\n",
|
|
pin, irq);
|
|
goto fail_unlock_irq;
|
|
}
|
|
|
|
event = kzalloc(sizeof(*event), GFP_KERNEL);
|
|
if (!event)
|
|
goto fail_unlock_irq;
|
|
|
|
event->irqflags = IRQF_ONESHOT;
|
|
if (agpio->triggering == ACPI_LEVEL_SENSITIVE) {
|
|
if (agpio->polarity == ACPI_ACTIVE_HIGH)
|
|
event->irqflags |= IRQF_TRIGGER_HIGH;
|
|
else
|
|
event->irqflags |= IRQF_TRIGGER_LOW;
|
|
} else {
|
|
switch (agpio->polarity) {
|
|
case ACPI_ACTIVE_HIGH:
|
|
event->irqflags |= IRQF_TRIGGER_RISING;
|
|
break;
|
|
case ACPI_ACTIVE_LOW:
|
|
event->irqflags |= IRQF_TRIGGER_FALLING;
|
|
break;
|
|
default:
|
|
event->irqflags |= IRQF_TRIGGER_RISING |
|
|
IRQF_TRIGGER_FALLING;
|
|
break;
|
|
}
|
|
}
|
|
|
|
event->handle = evt_handle;
|
|
event->handler = handler;
|
|
event->irq = irq;
|
|
event->irq_is_wake = agpio->wake_capable == ACPI_WAKE_CAPABLE;
|
|
event->pin = pin;
|
|
event->desc = desc;
|
|
|
|
list_add_tail(&event->node, &acpi_gpio->events);
|
|
|
|
return AE_OK;
|
|
|
|
fail_unlock_irq:
|
|
gpiochip_unlock_as_irq(chip, pin);
|
|
fail_free_desc:
|
|
gpiochip_free_own_desc(desc);
|
|
|
|
return AE_OK;
|
|
}
|
|
|
|
/**
|
|
* acpi_gpiochip_request_interrupts() - Register isr for gpio chip ACPI events
|
|
* @chip: GPIO chip
|
|
*
|
|
* ACPI5 platforms can use GPIO signaled ACPI events. These GPIO interrupts are
|
|
* handled by ACPI event methods which need to be called from the GPIO
|
|
* chip's interrupt handler. acpi_gpiochip_request_interrupts() finds out which
|
|
* GPIO pins have ACPI event methods and assigns interrupt handlers that calls
|
|
* the ACPI event methods for those pins.
|
|
*/
|
|
void acpi_gpiochip_request_interrupts(struct gpio_chip *chip)
|
|
{
|
|
struct acpi_gpio_chip *acpi_gpio;
|
|
acpi_handle handle;
|
|
acpi_status status;
|
|
bool defer;
|
|
|
|
if (!chip->parent || !chip->to_irq)
|
|
return;
|
|
|
|
handle = ACPI_HANDLE(chip->parent);
|
|
if (!handle)
|
|
return;
|
|
|
|
status = acpi_get_data(handle, acpi_gpio_chip_dh, (void **)&acpi_gpio);
|
|
if (ACPI_FAILURE(status))
|
|
return;
|
|
|
|
acpi_walk_resources(handle, "_AEI",
|
|
acpi_gpiochip_alloc_event, acpi_gpio);
|
|
|
|
mutex_lock(&acpi_gpio_deferred_req_irqs_lock);
|
|
defer = !acpi_gpio_deferred_req_irqs_done;
|
|
if (defer)
|
|
list_add(&acpi_gpio->deferred_req_irqs_list_entry,
|
|
&acpi_gpio_deferred_req_irqs_list);
|
|
mutex_unlock(&acpi_gpio_deferred_req_irqs_lock);
|
|
|
|
if (defer)
|
|
return;
|
|
|
|
acpi_gpiochip_request_irqs(acpi_gpio);
|
|
}
|
|
EXPORT_SYMBOL_GPL(acpi_gpiochip_request_interrupts);
|
|
|
|
/**
|
|
* acpi_gpiochip_free_interrupts() - Free GPIO ACPI event interrupts.
|
|
* @chip: GPIO chip
|
|
*
|
|
* Free interrupts associated with GPIO ACPI event method for the given
|
|
* GPIO chip.
|
|
*/
|
|
void acpi_gpiochip_free_interrupts(struct gpio_chip *chip)
|
|
{
|
|
struct acpi_gpio_chip *acpi_gpio;
|
|
struct acpi_gpio_event *event, *ep;
|
|
acpi_handle handle;
|
|
acpi_status status;
|
|
|
|
if (!chip->parent || !chip->to_irq)
|
|
return;
|
|
|
|
handle = ACPI_HANDLE(chip->parent);
|
|
if (!handle)
|
|
return;
|
|
|
|
status = acpi_get_data(handle, acpi_gpio_chip_dh, (void **)&acpi_gpio);
|
|
if (ACPI_FAILURE(status))
|
|
return;
|
|
|
|
mutex_lock(&acpi_gpio_deferred_req_irqs_lock);
|
|
if (!list_empty(&acpi_gpio->deferred_req_irqs_list_entry))
|
|
list_del_init(&acpi_gpio->deferred_req_irqs_list_entry);
|
|
mutex_unlock(&acpi_gpio_deferred_req_irqs_lock);
|
|
|
|
list_for_each_entry_safe_reverse(event, ep, &acpi_gpio->events, node) {
|
|
if (event->irq_requested) {
|
|
if (event->irq_is_wake)
|
|
disable_irq_wake(event->irq);
|
|
|
|
free_irq(event->irq, event);
|
|
}
|
|
|
|
gpiochip_unlock_as_irq(chip, event->pin);
|
|
gpiochip_free_own_desc(event->desc);
|
|
list_del(&event->node);
|
|
kfree(event);
|
|
}
|
|
}
|
|
EXPORT_SYMBOL_GPL(acpi_gpiochip_free_interrupts);
|
|
|
|
int acpi_dev_add_driver_gpios(struct acpi_device *adev,
|
|
const struct acpi_gpio_mapping *gpios)
|
|
{
|
|
if (adev && gpios) {
|
|
adev->driver_gpios = gpios;
|
|
return 0;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
EXPORT_SYMBOL_GPL(acpi_dev_add_driver_gpios);
|
|
|
|
void acpi_dev_remove_driver_gpios(struct acpi_device *adev)
|
|
{
|
|
if (adev)
|
|
adev->driver_gpios = NULL;
|
|
}
|
|
EXPORT_SYMBOL_GPL(acpi_dev_remove_driver_gpios);
|
|
|
|
static void devm_acpi_dev_release_driver_gpios(struct device *dev, void *res)
|
|
{
|
|
acpi_dev_remove_driver_gpios(ACPI_COMPANION(dev));
|
|
}
|
|
|
|
int devm_acpi_dev_add_driver_gpios(struct device *dev,
|
|
const struct acpi_gpio_mapping *gpios)
|
|
{
|
|
void *res;
|
|
int ret;
|
|
|
|
res = devres_alloc(devm_acpi_dev_release_driver_gpios, 0, GFP_KERNEL);
|
|
if (!res)
|
|
return -ENOMEM;
|
|
|
|
ret = acpi_dev_add_driver_gpios(ACPI_COMPANION(dev), gpios);
|
|
if (ret) {
|
|
devres_free(res);
|
|
return ret;
|
|
}
|
|
devres_add(dev, res);
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(devm_acpi_dev_add_driver_gpios);
|
|
|
|
void devm_acpi_dev_remove_driver_gpios(struct device *dev)
|
|
{
|
|
WARN_ON(devres_release(dev, devm_acpi_dev_release_driver_gpios, NULL, NULL));
|
|
}
|
|
EXPORT_SYMBOL_GPL(devm_acpi_dev_remove_driver_gpios);
|
|
|
|
static bool acpi_get_driver_gpio_data(struct acpi_device *adev,
|
|
const char *name, int index,
|
|
struct fwnode_reference_args *args,
|
|
unsigned int *quirks)
|
|
{
|
|
const struct acpi_gpio_mapping *gm;
|
|
|
|
if (!adev->driver_gpios)
|
|
return false;
|
|
|
|
for (gm = adev->driver_gpios; gm->name; gm++)
|
|
if (!strcmp(name, gm->name) && gm->data && index < gm->size) {
|
|
const struct acpi_gpio_params *par = gm->data + index;
|
|
|
|
args->fwnode = acpi_fwnode_handle(adev);
|
|
args->args[0] = par->crs_entry_index;
|
|
args->args[1] = par->line_index;
|
|
args->args[2] = par->active_low;
|
|
args->nargs = 3;
|
|
|
|
*quirks = gm->quirks;
|
|
return true;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
static enum gpiod_flags
|
|
acpi_gpio_to_gpiod_flags(const struct acpi_resource_gpio *agpio)
|
|
{
|
|
switch (agpio->io_restriction) {
|
|
case ACPI_IO_RESTRICT_INPUT:
|
|
return GPIOD_IN;
|
|
case ACPI_IO_RESTRICT_OUTPUT:
|
|
/*
|
|
* ACPI GPIO resources don't contain an initial value for the
|
|
* GPIO. Therefore we deduce that value from the pull field
|
|
* instead. If the pin is pulled up we assume default to be
|
|
* high, if it is pulled down we assume default to be low,
|
|
* otherwise we leave pin untouched.
|
|
*/
|
|
switch (agpio->pin_config) {
|
|
case ACPI_PIN_CONFIG_PULLUP:
|
|
return GPIOD_OUT_HIGH;
|
|
case ACPI_PIN_CONFIG_PULLDOWN:
|
|
return GPIOD_OUT_LOW;
|
|
default:
|
|
break;
|
|
}
|
|
default:
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* Assume that the BIOS has configured the direction and pull
|
|
* accordingly.
|
|
*/
|
|
return GPIOD_ASIS;
|
|
}
|
|
|
|
static int
|
|
__acpi_gpio_update_gpiod_flags(enum gpiod_flags *flags, enum gpiod_flags update)
|
|
{
|
|
const enum gpiod_flags mask =
|
|
GPIOD_FLAGS_BIT_DIR_SET | GPIOD_FLAGS_BIT_DIR_OUT |
|
|
GPIOD_FLAGS_BIT_DIR_VAL;
|
|
int ret = 0;
|
|
|
|
/*
|
|
* Check if the BIOS has IoRestriction with explicitly set direction
|
|
* and update @flags accordingly. Otherwise use whatever caller asked
|
|
* for.
|
|
*/
|
|
if (update & GPIOD_FLAGS_BIT_DIR_SET) {
|
|
enum gpiod_flags diff = *flags ^ update;
|
|
|
|
/*
|
|
* Check if caller supplied incompatible GPIO initialization
|
|
* flags.
|
|
*
|
|
* Return %-EINVAL to notify that firmware has different
|
|
* settings and we are going to use them.
|
|
*/
|
|
if (((*flags & GPIOD_FLAGS_BIT_DIR_SET) && (diff & GPIOD_FLAGS_BIT_DIR_OUT)) ||
|
|
((*flags & GPIOD_FLAGS_BIT_DIR_OUT) && (diff & GPIOD_FLAGS_BIT_DIR_VAL)))
|
|
ret = -EINVAL;
|
|
*flags = (*flags & ~mask) | (update & mask);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
int
|
|
acpi_gpio_update_gpiod_flags(enum gpiod_flags *flags, struct acpi_gpio_info *info)
|
|
{
|
|
struct device *dev = &info->adev->dev;
|
|
enum gpiod_flags old = *flags;
|
|
int ret;
|
|
|
|
ret = __acpi_gpio_update_gpiod_flags(&old, info->flags);
|
|
if (info->quirks & ACPI_GPIO_QUIRK_NO_IO_RESTRICTION) {
|
|
if (ret)
|
|
dev_warn(dev, FW_BUG "GPIO not in correct mode, fixing\n");
|
|
} else {
|
|
if (ret)
|
|
dev_dbg(dev, "Override GPIO initialization flags\n");
|
|
*flags = old;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
int acpi_gpio_update_gpiod_lookup_flags(unsigned long *lookupflags,
|
|
struct acpi_gpio_info *info)
|
|
{
|
|
switch (info->pin_config) {
|
|
case ACPI_PIN_CONFIG_PULLUP:
|
|
*lookupflags |= GPIO_PULL_UP;
|
|
break;
|
|
case ACPI_PIN_CONFIG_PULLDOWN:
|
|
*lookupflags |= GPIO_PULL_DOWN;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
if (info->polarity == GPIO_ACTIVE_LOW)
|
|
*lookupflags |= GPIO_ACTIVE_LOW;
|
|
|
|
return 0;
|
|
}
|
|
|
|
struct acpi_gpio_lookup {
|
|
struct acpi_gpio_info info;
|
|
int index;
|
|
int pin_index;
|
|
bool active_low;
|
|
struct gpio_desc *desc;
|
|
int n;
|
|
};
|
|
|
|
static int acpi_populate_gpio_lookup(struct acpi_resource *ares, void *data)
|
|
{
|
|
struct acpi_gpio_lookup *lookup = data;
|
|
|
|
if (ares->type != ACPI_RESOURCE_TYPE_GPIO)
|
|
return 1;
|
|
|
|
if (!lookup->desc) {
|
|
const struct acpi_resource_gpio *agpio = &ares->data.gpio;
|
|
bool gpioint = agpio->connection_type == ACPI_RESOURCE_GPIO_TYPE_INT;
|
|
int pin_index;
|
|
|
|
if (lookup->info.quirks & ACPI_GPIO_QUIRK_ONLY_GPIOIO && gpioint)
|
|
lookup->index++;
|
|
|
|
if (lookup->n++ != lookup->index)
|
|
return 1;
|
|
|
|
pin_index = lookup->pin_index;
|
|
if (pin_index >= agpio->pin_table_length)
|
|
return 1;
|
|
|
|
lookup->desc = acpi_get_gpiod(agpio->resource_source.string_ptr,
|
|
agpio->pin_table[pin_index]);
|
|
lookup->info.pin_config = agpio->pin_config;
|
|
lookup->info.gpioint = gpioint;
|
|
|
|
/*
|
|
* Polarity and triggering are only specified for GpioInt
|
|
* resource.
|
|
* Note: we expect here:
|
|
* - ACPI_ACTIVE_LOW == GPIO_ACTIVE_LOW
|
|
* - ACPI_ACTIVE_HIGH == GPIO_ACTIVE_HIGH
|
|
*/
|
|
if (lookup->info.gpioint) {
|
|
lookup->info.flags = GPIOD_IN;
|
|
lookup->info.polarity = agpio->polarity;
|
|
lookup->info.triggering = agpio->triggering;
|
|
} else {
|
|
lookup->info.flags = acpi_gpio_to_gpiod_flags(agpio);
|
|
lookup->info.polarity = lookup->active_low;
|
|
}
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int acpi_gpio_resource_lookup(struct acpi_gpio_lookup *lookup,
|
|
struct acpi_gpio_info *info)
|
|
{
|
|
struct acpi_device *adev = lookup->info.adev;
|
|
struct list_head res_list;
|
|
int ret;
|
|
|
|
INIT_LIST_HEAD(&res_list);
|
|
|
|
ret = acpi_dev_get_resources(adev, &res_list,
|
|
acpi_populate_gpio_lookup,
|
|
lookup);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
acpi_dev_free_resource_list(&res_list);
|
|
|
|
if (!lookup->desc)
|
|
return -ENOENT;
|
|
|
|
if (info)
|
|
*info = lookup->info;
|
|
return 0;
|
|
}
|
|
|
|
static int acpi_gpio_property_lookup(struct fwnode_handle *fwnode,
|
|
const char *propname, int index,
|
|
struct acpi_gpio_lookup *lookup)
|
|
{
|
|
struct fwnode_reference_args args;
|
|
unsigned int quirks = 0;
|
|
int ret;
|
|
|
|
memset(&args, 0, sizeof(args));
|
|
ret = __acpi_node_get_property_reference(fwnode, propname, index, 3,
|
|
&args);
|
|
if (ret) {
|
|
struct acpi_device *adev = to_acpi_device_node(fwnode);
|
|
|
|
if (!adev)
|
|
return ret;
|
|
|
|
if (!acpi_get_driver_gpio_data(adev, propname, index, &args,
|
|
&quirks))
|
|
return ret;
|
|
}
|
|
/*
|
|
* The property was found and resolved, so need to lookup the GPIO based
|
|
* on returned args.
|
|
*/
|
|
if (!to_acpi_device_node(args.fwnode))
|
|
return -EINVAL;
|
|
if (args.nargs != 3)
|
|
return -EPROTO;
|
|
|
|
lookup->index = args.args[0];
|
|
lookup->pin_index = args.args[1];
|
|
lookup->active_low = !!args.args[2];
|
|
|
|
lookup->info.adev = to_acpi_device_node(args.fwnode);
|
|
lookup->info.quirks = quirks;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* acpi_get_gpiod_by_index() - get a GPIO descriptor from device resources
|
|
* @adev: pointer to a ACPI device to get GPIO from
|
|
* @propname: Property name of the GPIO (optional)
|
|
* @index: index of GpioIo/GpioInt resource (starting from %0)
|
|
* @info: info pointer to fill in (optional)
|
|
*
|
|
* Function goes through ACPI resources for @adev and based on @index looks
|
|
* up a GpioIo/GpioInt resource, translates it to the Linux GPIO descriptor,
|
|
* and returns it. @index matches GpioIo/GpioInt resources only so if there
|
|
* are total %3 GPIO resources, the index goes from %0 to %2.
|
|
*
|
|
* If @propname is specified the GPIO is looked using device property. In
|
|
* that case @index is used to select the GPIO entry in the property value
|
|
* (in case of multiple).
|
|
*
|
|
* If the GPIO cannot be translated or there is an error, an ERR_PTR is
|
|
* returned.
|
|
*
|
|
* Note: if the GPIO resource has multiple entries in the pin list, this
|
|
* function only returns the first.
|
|
*/
|
|
static struct gpio_desc *acpi_get_gpiod_by_index(struct acpi_device *adev,
|
|
const char *propname, int index,
|
|
struct acpi_gpio_info *info)
|
|
{
|
|
struct acpi_gpio_lookup lookup;
|
|
int ret;
|
|
|
|
if (!adev)
|
|
return ERR_PTR(-ENODEV);
|
|
|
|
memset(&lookup, 0, sizeof(lookup));
|
|
lookup.index = index;
|
|
|
|
if (propname) {
|
|
dev_dbg(&adev->dev, "GPIO: looking up %s\n", propname);
|
|
|
|
ret = acpi_gpio_property_lookup(acpi_fwnode_handle(adev),
|
|
propname, index, &lookup);
|
|
if (ret)
|
|
return ERR_PTR(ret);
|
|
|
|
dev_dbg(&adev->dev, "GPIO: _DSD returned %s %d %d %u\n",
|
|
dev_name(&lookup.info.adev->dev), lookup.index,
|
|
lookup.pin_index, lookup.active_low);
|
|
} else {
|
|
dev_dbg(&adev->dev, "GPIO: looking up %d in _CRS\n", index);
|
|
lookup.info.adev = adev;
|
|
}
|
|
|
|
ret = acpi_gpio_resource_lookup(&lookup, info);
|
|
return ret ? ERR_PTR(ret) : lookup.desc;
|
|
}
|
|
|
|
static bool acpi_can_fallback_to_crs(struct acpi_device *adev,
|
|
const char *con_id)
|
|
{
|
|
/* Never allow fallback if the device has properties */
|
|
if (acpi_dev_has_props(adev) || adev->driver_gpios)
|
|
return false;
|
|
|
|
return con_id == NULL;
|
|
}
|
|
|
|
struct gpio_desc *acpi_find_gpio(struct device *dev,
|
|
const char *con_id,
|
|
unsigned int idx,
|
|
enum gpiod_flags *dflags,
|
|
unsigned long *lookupflags)
|
|
{
|
|
struct acpi_device *adev = ACPI_COMPANION(dev);
|
|
struct acpi_gpio_info info;
|
|
struct gpio_desc *desc;
|
|
char propname[32];
|
|
int i;
|
|
|
|
/* Try first from _DSD */
|
|
for (i = 0; i < ARRAY_SIZE(gpio_suffixes); i++) {
|
|
if (con_id) {
|
|
snprintf(propname, sizeof(propname), "%s-%s",
|
|
con_id, gpio_suffixes[i]);
|
|
} else {
|
|
snprintf(propname, sizeof(propname), "%s",
|
|
gpio_suffixes[i]);
|
|
}
|
|
|
|
desc = acpi_get_gpiod_by_index(adev, propname, idx, &info);
|
|
if (!IS_ERR(desc))
|
|
break;
|
|
if (PTR_ERR(desc) == -EPROBE_DEFER)
|
|
return ERR_CAST(desc);
|
|
}
|
|
|
|
/* Then from plain _CRS GPIOs */
|
|
if (IS_ERR(desc)) {
|
|
if (!acpi_can_fallback_to_crs(adev, con_id))
|
|
return ERR_PTR(-ENOENT);
|
|
|
|
desc = acpi_get_gpiod_by_index(adev, NULL, idx, &info);
|
|
if (IS_ERR(desc))
|
|
return desc;
|
|
}
|
|
|
|
if (info.gpioint &&
|
|
(*dflags == GPIOD_OUT_LOW || *dflags == GPIOD_OUT_HIGH)) {
|
|
dev_dbg(dev, "refusing GpioInt() entry when doing GPIOD_OUT_* lookup\n");
|
|
return ERR_PTR(-ENOENT);
|
|
}
|
|
|
|
acpi_gpio_update_gpiod_flags(dflags, &info);
|
|
acpi_gpio_update_gpiod_lookup_flags(lookupflags, &info);
|
|
return desc;
|
|
}
|
|
|
|
/**
|
|
* acpi_node_get_gpiod() - get a GPIO descriptor from ACPI resources
|
|
* @fwnode: pointer to an ACPI firmware node to get the GPIO information from
|
|
* @propname: Property name of the GPIO
|
|
* @index: index of GpioIo/GpioInt resource (starting from %0)
|
|
* @info: info pointer to fill in (optional)
|
|
*
|
|
* If @fwnode is an ACPI device object, call acpi_get_gpiod_by_index() for it.
|
|
* Otherwise (i.e. it is a data-only non-device object), use the property-based
|
|
* GPIO lookup to get to the GPIO resource with the relevant information and use
|
|
* that to obtain the GPIO descriptor to return.
|
|
*
|
|
* If the GPIO cannot be translated or there is an error an ERR_PTR is
|
|
* returned.
|
|
*/
|
|
struct gpio_desc *acpi_node_get_gpiod(struct fwnode_handle *fwnode,
|
|
const char *propname, int index,
|
|
struct acpi_gpio_info *info)
|
|
{
|
|
struct acpi_gpio_lookup lookup;
|
|
struct acpi_device *adev;
|
|
int ret;
|
|
|
|
adev = to_acpi_device_node(fwnode);
|
|
if (adev)
|
|
return acpi_get_gpiod_by_index(adev, propname, index, info);
|
|
|
|
if (!is_acpi_data_node(fwnode))
|
|
return ERR_PTR(-ENODEV);
|
|
|
|
if (!propname)
|
|
return ERR_PTR(-EINVAL);
|
|
|
|
memset(&lookup, 0, sizeof(lookup));
|
|
lookup.index = index;
|
|
|
|
ret = acpi_gpio_property_lookup(fwnode, propname, index, &lookup);
|
|
if (ret)
|
|
return ERR_PTR(ret);
|
|
|
|
ret = acpi_gpio_resource_lookup(&lookup, info);
|
|
return ret ? ERR_PTR(ret) : lookup.desc;
|
|
}
|
|
|
|
/**
|
|
* acpi_dev_gpio_irq_get() - Find GpioInt and translate it to Linux IRQ number
|
|
* @adev: pointer to a ACPI device to get IRQ from
|
|
* @index: index of GpioInt resource (starting from %0)
|
|
*
|
|
* If the device has one or more GpioInt resources, this function can be
|
|
* used to translate from the GPIO offset in the resource to the Linux IRQ
|
|
* number.
|
|
*
|
|
* The function is idempotent, though each time it runs it will configure GPIO
|
|
* pin direction according to the flags in GpioInt resource.
|
|
*
|
|
* Return: Linux IRQ number (> %0) on success, negative errno on failure.
|
|
*/
|
|
int acpi_dev_gpio_irq_get(struct acpi_device *adev, int index)
|
|
{
|
|
int idx, i;
|
|
unsigned int irq_flags;
|
|
int ret;
|
|
|
|
for (i = 0, idx = 0; idx <= index; i++) {
|
|
struct acpi_gpio_info info;
|
|
struct gpio_desc *desc;
|
|
|
|
desc = acpi_get_gpiod_by_index(adev, NULL, i, &info);
|
|
|
|
/* Ignore -EPROBE_DEFER, it only matters if idx matches */
|
|
if (IS_ERR(desc) && PTR_ERR(desc) != -EPROBE_DEFER)
|
|
return PTR_ERR(desc);
|
|
|
|
if (info.gpioint && idx++ == index) {
|
|
unsigned long lflags = GPIO_LOOKUP_FLAGS_DEFAULT;
|
|
char label[32];
|
|
int irq;
|
|
|
|
if (IS_ERR(desc))
|
|
return PTR_ERR(desc);
|
|
|
|
irq = gpiod_to_irq(desc);
|
|
if (irq < 0)
|
|
return irq;
|
|
|
|
snprintf(label, sizeof(label), "GpioInt() %d", index);
|
|
ret = gpiod_configure_flags(desc, label, lflags, info.flags);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
irq_flags = acpi_dev_get_irq_type(info.triggering,
|
|
info.polarity);
|
|
|
|
/* Set type if specified and different than the current one */
|
|
if (irq_flags != IRQ_TYPE_NONE &&
|
|
irq_flags != irq_get_trigger_type(irq))
|
|
irq_set_irq_type(irq, irq_flags);
|
|
|
|
return irq;
|
|
}
|
|
|
|
}
|
|
return -ENOENT;
|
|
}
|
|
EXPORT_SYMBOL_GPL(acpi_dev_gpio_irq_get);
|
|
|
|
static acpi_status
|
|
acpi_gpio_adr_space_handler(u32 function, acpi_physical_address address,
|
|
u32 bits, u64 *value, void *handler_context,
|
|
void *region_context)
|
|
{
|
|
struct acpi_gpio_chip *achip = region_context;
|
|
struct gpio_chip *chip = achip->chip;
|
|
struct acpi_resource_gpio *agpio;
|
|
struct acpi_resource *ares;
|
|
int pin_index = (int)address;
|
|
acpi_status status;
|
|
int length;
|
|
int i;
|
|
|
|
status = acpi_buffer_to_resource(achip->conn_info.connection,
|
|
achip->conn_info.length, &ares);
|
|
if (ACPI_FAILURE(status))
|
|
return status;
|
|
|
|
if (WARN_ON(ares->type != ACPI_RESOURCE_TYPE_GPIO)) {
|
|
ACPI_FREE(ares);
|
|
return AE_BAD_PARAMETER;
|
|
}
|
|
|
|
agpio = &ares->data.gpio;
|
|
|
|
if (WARN_ON(agpio->io_restriction == ACPI_IO_RESTRICT_INPUT &&
|
|
function == ACPI_WRITE)) {
|
|
ACPI_FREE(ares);
|
|
return AE_BAD_PARAMETER;
|
|
}
|
|
|
|
length = min(agpio->pin_table_length, (u16)(pin_index + bits));
|
|
for (i = pin_index; i < length; ++i) {
|
|
int pin = agpio->pin_table[i];
|
|
struct acpi_gpio_connection *conn;
|
|
struct gpio_desc *desc;
|
|
bool found;
|
|
|
|
mutex_lock(&achip->conn_lock);
|
|
|
|
found = false;
|
|
list_for_each_entry(conn, &achip->conns, node) {
|
|
if (conn->pin == pin) {
|
|
found = true;
|
|
desc = conn->desc;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* The same GPIO can be shared between operation region and
|
|
* event but only if the access here is ACPI_READ. In that
|
|
* case we "borrow" the event GPIO instead.
|
|
*/
|
|
if (!found && agpio->shareable == ACPI_SHARED &&
|
|
function == ACPI_READ) {
|
|
struct acpi_gpio_event *event;
|
|
|
|
list_for_each_entry(event, &achip->events, node) {
|
|
if (event->pin == pin) {
|
|
desc = event->desc;
|
|
found = true;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (!found) {
|
|
enum gpiod_flags flags = acpi_gpio_to_gpiod_flags(agpio);
|
|
const char *label = "ACPI:OpRegion";
|
|
|
|
desc = gpiochip_request_own_desc(chip, pin, label,
|
|
GPIO_ACTIVE_HIGH,
|
|
flags);
|
|
if (IS_ERR(desc)) {
|
|
status = AE_ERROR;
|
|
mutex_unlock(&achip->conn_lock);
|
|
goto out;
|
|
}
|
|
|
|
conn = kzalloc(sizeof(*conn), GFP_KERNEL);
|
|
if (!conn) {
|
|
status = AE_NO_MEMORY;
|
|
gpiochip_free_own_desc(desc);
|
|
mutex_unlock(&achip->conn_lock);
|
|
goto out;
|
|
}
|
|
|
|
conn->pin = pin;
|
|
conn->desc = desc;
|
|
list_add_tail(&conn->node, &achip->conns);
|
|
}
|
|
|
|
mutex_unlock(&achip->conn_lock);
|
|
|
|
if (function == ACPI_WRITE)
|
|
gpiod_set_raw_value_cansleep(desc,
|
|
!!((1 << i) & *value));
|
|
else
|
|
*value |= (u64)gpiod_get_raw_value_cansleep(desc) << i;
|
|
}
|
|
|
|
out:
|
|
ACPI_FREE(ares);
|
|
return status;
|
|
}
|
|
|
|
static void acpi_gpiochip_request_regions(struct acpi_gpio_chip *achip)
|
|
{
|
|
struct gpio_chip *chip = achip->chip;
|
|
acpi_handle handle = ACPI_HANDLE(chip->parent);
|
|
acpi_status status;
|
|
|
|
INIT_LIST_HEAD(&achip->conns);
|
|
mutex_init(&achip->conn_lock);
|
|
status = acpi_install_address_space_handler(handle, ACPI_ADR_SPACE_GPIO,
|
|
acpi_gpio_adr_space_handler,
|
|
NULL, achip);
|
|
if (ACPI_FAILURE(status))
|
|
dev_err(chip->parent,
|
|
"Failed to install GPIO OpRegion handler\n");
|
|
}
|
|
|
|
static void acpi_gpiochip_free_regions(struct acpi_gpio_chip *achip)
|
|
{
|
|
struct gpio_chip *chip = achip->chip;
|
|
acpi_handle handle = ACPI_HANDLE(chip->parent);
|
|
struct acpi_gpio_connection *conn, *tmp;
|
|
acpi_status status;
|
|
|
|
status = acpi_remove_address_space_handler(handle, ACPI_ADR_SPACE_GPIO,
|
|
acpi_gpio_adr_space_handler);
|
|
if (ACPI_FAILURE(status)) {
|
|
dev_err(chip->parent,
|
|
"Failed to remove GPIO OpRegion handler\n");
|
|
return;
|
|
}
|
|
|
|
list_for_each_entry_safe_reverse(conn, tmp, &achip->conns, node) {
|
|
gpiochip_free_own_desc(conn->desc);
|
|
list_del(&conn->node);
|
|
kfree(conn);
|
|
}
|
|
}
|
|
|
|
static struct gpio_desc *
|
|
acpi_gpiochip_parse_own_gpio(struct acpi_gpio_chip *achip,
|
|
struct fwnode_handle *fwnode,
|
|
const char **name,
|
|
unsigned long *lflags,
|
|
enum gpiod_flags *dflags)
|
|
{
|
|
struct gpio_chip *chip = achip->chip;
|
|
struct gpio_desc *desc;
|
|
u32 gpios[2];
|
|
int ret;
|
|
|
|
*lflags = GPIO_LOOKUP_FLAGS_DEFAULT;
|
|
*dflags = 0;
|
|
*name = NULL;
|
|
|
|
ret = fwnode_property_read_u32_array(fwnode, "gpios", gpios,
|
|
ARRAY_SIZE(gpios));
|
|
if (ret < 0)
|
|
return ERR_PTR(ret);
|
|
|
|
desc = gpiochip_get_desc(chip, gpios[0]);
|
|
if (IS_ERR(desc))
|
|
return desc;
|
|
|
|
if (gpios[1])
|
|
*lflags |= GPIO_ACTIVE_LOW;
|
|
|
|
if (fwnode_property_present(fwnode, "input"))
|
|
*dflags |= GPIOD_IN;
|
|
else if (fwnode_property_present(fwnode, "output-low"))
|
|
*dflags |= GPIOD_OUT_LOW;
|
|
else if (fwnode_property_present(fwnode, "output-high"))
|
|
*dflags |= GPIOD_OUT_HIGH;
|
|
else
|
|
return ERR_PTR(-EINVAL);
|
|
|
|
fwnode_property_read_string(fwnode, "line-name", name);
|
|
|
|
return desc;
|
|
}
|
|
|
|
static void acpi_gpiochip_scan_gpios(struct acpi_gpio_chip *achip)
|
|
{
|
|
struct gpio_chip *chip = achip->chip;
|
|
struct fwnode_handle *fwnode;
|
|
|
|
device_for_each_child_node(chip->parent, fwnode) {
|
|
unsigned long lflags;
|
|
enum gpiod_flags dflags;
|
|
struct gpio_desc *desc;
|
|
const char *name;
|
|
int ret;
|
|
|
|
if (!fwnode_property_present(fwnode, "gpio-hog"))
|
|
continue;
|
|
|
|
desc = acpi_gpiochip_parse_own_gpio(achip, fwnode, &name,
|
|
&lflags, &dflags);
|
|
if (IS_ERR(desc))
|
|
continue;
|
|
|
|
ret = gpiod_hog(desc, name, lflags, dflags);
|
|
if (ret) {
|
|
dev_err(chip->parent, "Failed to hog GPIO\n");
|
|
fwnode_handle_put(fwnode);
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
void acpi_gpiochip_add(struct gpio_chip *chip)
|
|
{
|
|
struct acpi_gpio_chip *acpi_gpio;
|
|
acpi_handle handle;
|
|
acpi_status status;
|
|
|
|
if (!chip || !chip->parent)
|
|
return;
|
|
|
|
handle = ACPI_HANDLE(chip->parent);
|
|
if (!handle)
|
|
return;
|
|
|
|
acpi_gpio = kzalloc(sizeof(*acpi_gpio), GFP_KERNEL);
|
|
if (!acpi_gpio) {
|
|
dev_err(chip->parent,
|
|
"Failed to allocate memory for ACPI GPIO chip\n");
|
|
return;
|
|
}
|
|
|
|
acpi_gpio->chip = chip;
|
|
INIT_LIST_HEAD(&acpi_gpio->events);
|
|
INIT_LIST_HEAD(&acpi_gpio->deferred_req_irqs_list_entry);
|
|
|
|
status = acpi_attach_data(handle, acpi_gpio_chip_dh, acpi_gpio);
|
|
if (ACPI_FAILURE(status)) {
|
|
dev_err(chip->parent, "Failed to attach ACPI GPIO chip\n");
|
|
kfree(acpi_gpio);
|
|
return;
|
|
}
|
|
|
|
if (!chip->names)
|
|
devprop_gpiochip_set_names(chip, dev_fwnode(chip->parent));
|
|
|
|
acpi_gpiochip_request_regions(acpi_gpio);
|
|
acpi_gpiochip_scan_gpios(acpi_gpio);
|
|
acpi_walk_dep_device_list(handle);
|
|
}
|
|
|
|
void acpi_gpiochip_remove(struct gpio_chip *chip)
|
|
{
|
|
struct acpi_gpio_chip *acpi_gpio;
|
|
acpi_handle handle;
|
|
acpi_status status;
|
|
|
|
if (!chip || !chip->parent)
|
|
return;
|
|
|
|
handle = ACPI_HANDLE(chip->parent);
|
|
if (!handle)
|
|
return;
|
|
|
|
status = acpi_get_data(handle, acpi_gpio_chip_dh, (void **)&acpi_gpio);
|
|
if (ACPI_FAILURE(status)) {
|
|
dev_warn(chip->parent, "Failed to retrieve ACPI GPIO chip\n");
|
|
return;
|
|
}
|
|
|
|
acpi_gpiochip_free_regions(acpi_gpio);
|
|
|
|
acpi_detach_data(handle, acpi_gpio_chip_dh);
|
|
kfree(acpi_gpio);
|
|
}
|
|
|
|
static int acpi_gpio_package_count(const union acpi_object *obj)
|
|
{
|
|
const union acpi_object *element = obj->package.elements;
|
|
const union acpi_object *end = element + obj->package.count;
|
|
unsigned int count = 0;
|
|
|
|
while (element < end) {
|
|
switch (element->type) {
|
|
case ACPI_TYPE_LOCAL_REFERENCE:
|
|
element += 3;
|
|
/* Fallthrough */
|
|
case ACPI_TYPE_INTEGER:
|
|
element++;
|
|
count++;
|
|
break;
|
|
|
|
default:
|
|
return -EPROTO;
|
|
}
|
|
}
|
|
|
|
return count;
|
|
}
|
|
|
|
static int acpi_find_gpio_count(struct acpi_resource *ares, void *data)
|
|
{
|
|
unsigned int *count = data;
|
|
|
|
if (ares->type == ACPI_RESOURCE_TYPE_GPIO)
|
|
*count += ares->data.gpio.pin_table_length;
|
|
|
|
return 1;
|
|
}
|
|
|
|
/**
|
|
* acpi_gpio_count - count the GPIOs associated with a device / function
|
|
* @dev: GPIO consumer, can be %NULL for system-global GPIOs
|
|
* @con_id: function within the GPIO consumer
|
|
*
|
|
* Return:
|
|
* The number of GPIOs associated with a device / function or %-ENOENT,
|
|
* if no GPIO has been assigned to the requested function.
|
|
*/
|
|
int acpi_gpio_count(struct device *dev, const char *con_id)
|
|
{
|
|
struct acpi_device *adev = ACPI_COMPANION(dev);
|
|
const union acpi_object *obj;
|
|
const struct acpi_gpio_mapping *gm;
|
|
int count = -ENOENT;
|
|
int ret;
|
|
char propname[32];
|
|
unsigned int i;
|
|
|
|
/* Try first from _DSD */
|
|
for (i = 0; i < ARRAY_SIZE(gpio_suffixes); i++) {
|
|
if (con_id)
|
|
snprintf(propname, sizeof(propname), "%s-%s",
|
|
con_id, gpio_suffixes[i]);
|
|
else
|
|
snprintf(propname, sizeof(propname), "%s",
|
|
gpio_suffixes[i]);
|
|
|
|
ret = acpi_dev_get_property(adev, propname, ACPI_TYPE_ANY,
|
|
&obj);
|
|
if (ret == 0) {
|
|
if (obj->type == ACPI_TYPE_LOCAL_REFERENCE)
|
|
count = 1;
|
|
else if (obj->type == ACPI_TYPE_PACKAGE)
|
|
count = acpi_gpio_package_count(obj);
|
|
} else if (adev->driver_gpios) {
|
|
for (gm = adev->driver_gpios; gm->name; gm++)
|
|
if (strcmp(propname, gm->name) == 0) {
|
|
count = gm->size;
|
|
break;
|
|
}
|
|
}
|
|
if (count > 0)
|
|
break;
|
|
}
|
|
|
|
/* Then from plain _CRS GPIOs */
|
|
if (count < 0) {
|
|
struct list_head resource_list;
|
|
unsigned int crs_count = 0;
|
|
|
|
if (!acpi_can_fallback_to_crs(adev, con_id))
|
|
return count;
|
|
|
|
INIT_LIST_HEAD(&resource_list);
|
|
acpi_dev_get_resources(adev, &resource_list,
|
|
acpi_find_gpio_count, &crs_count);
|
|
acpi_dev_free_resource_list(&resource_list);
|
|
if (crs_count > 0)
|
|
count = crs_count;
|
|
}
|
|
return count ? count : -ENOENT;
|
|
}
|
|
|
|
/* Run deferred acpi_gpiochip_request_irqs() */
|
|
static int acpi_gpio_handle_deferred_request_irqs(void)
|
|
{
|
|
struct acpi_gpio_chip *acpi_gpio, *tmp;
|
|
|
|
mutex_lock(&acpi_gpio_deferred_req_irqs_lock);
|
|
list_for_each_entry_safe(acpi_gpio, tmp,
|
|
&acpi_gpio_deferred_req_irqs_list,
|
|
deferred_req_irqs_list_entry)
|
|
acpi_gpiochip_request_irqs(acpi_gpio);
|
|
|
|
acpi_gpio_deferred_req_irqs_done = true;
|
|
mutex_unlock(&acpi_gpio_deferred_req_irqs_lock);
|
|
|
|
return 0;
|
|
}
|
|
/* We must use _sync so that this runs after the first deferred_probe run */
|
|
late_initcall_sync(acpi_gpio_handle_deferred_request_irqs);
|
|
|
|
static const struct dmi_system_id run_edge_events_on_boot_blacklist[] = {
|
|
{
|
|
/*
|
|
* The Minix Neo Z83-4 has a micro-USB-B id-pin handler for
|
|
* a non existing micro-USB-B connector which puts the HDMI
|
|
* DDC pins in GPIO mode, breaking HDMI support.
|
|
*/
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "MINIX"),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "Z83-4"),
|
|
}
|
|
},
|
|
{
|
|
/*
|
|
* The Terra Pad 1061 has a micro-USB-B id-pin handler, which
|
|
* instead of controlling the actual micro-USB-B turns the 5V
|
|
* boost for its USB-A connector off. The actual micro-USB-B
|
|
* connector is wired for charging only.
|
|
*/
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "Wortmann_AG"),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "TERRA_PAD_1061"),
|
|
}
|
|
},
|
|
{} /* Terminating entry */
|
|
};
|
|
|
|
static int acpi_gpio_setup_params(void)
|
|
{
|
|
if (run_edge_events_on_boot < 0) {
|
|
if (dmi_check_system(run_edge_events_on_boot_blacklist))
|
|
run_edge_events_on_boot = 0;
|
|
else
|
|
run_edge_events_on_boot = 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Directly after dmi_setup() which runs as core_initcall() */
|
|
postcore_initcall(acpi_gpio_setup_params);
|