mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-21 09:24:37 +07:00
1534156e99
On Armada 7K/8K we need to explicitly enable the bus clock. The bus clock is optional because not all the SoCs need them but at least for Armada 7K/8K it is actually mandatory. The binding documentation is updating accordingly. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
65 lines
1.9 KiB
Plaintext
65 lines
1.9 KiB
Plaintext
|
|
* Marvell MV64XXX I2C controller
|
|
|
|
Required properties :
|
|
|
|
- reg : Offset and length of the register set for the device
|
|
- compatible : Should be either:
|
|
- "allwinner,sun4i-a10-i2c"
|
|
- "allwinner,sun6i-a31-i2c"
|
|
- "marvell,mv64xxx-i2c"
|
|
- "marvell,mv78230-i2c"
|
|
- "marvell,mv78230-a0-i2c"
|
|
* Note: Only use "marvell,mv78230-a0-i2c" for a
|
|
very rare, initial version of the SoC which
|
|
had broken offload support. Linux
|
|
auto-detects this and sets it appropriately.
|
|
- interrupts : The interrupt number
|
|
|
|
Optional properties :
|
|
|
|
- clock-frequency : Desired I2C bus clock frequency in Hz. If not set the
|
|
default frequency is 100kHz
|
|
|
|
- resets : phandle to the parent reset controller. Mandatory
|
|
whenever you're using the "allwinner,sun6i-a31-i2c"
|
|
compatible.
|
|
|
|
- clocks: : pointers to the reference clocks for this device, the
|
|
first one is the one used for the clock on the i2c bus,
|
|
the second one is the clock used to acces the registers
|
|
of the controller
|
|
|
|
- clock-names : names of used clocks, mandatory if the second clock is
|
|
used, the name must be "core", and "reg" (the latter is
|
|
only for Armada 7K/8K).
|
|
|
|
Examples:
|
|
|
|
i2c@11000 {
|
|
compatible = "marvell,mv64xxx-i2c";
|
|
reg = <0x11000 0x20>;
|
|
interrupts = <29>;
|
|
clock-frequency = <100000>;
|
|
};
|
|
|
|
For the Armada XP:
|
|
|
|
i2c@11000 {
|
|
compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
|
|
reg = <0x11000 0x100>;
|
|
interrupts = <29>;
|
|
clock-frequency = <100000>;
|
|
};
|
|
|
|
For the Armada 7040:
|
|
|
|
i2c@701000 {
|
|
compatible = "marvell,mv78230-i2c";
|
|
reg = <0x701000 0x20>;
|
|
interrupts = <29>;
|
|
clock-frequency = <100000>;
|
|
clock-names = "core", "reg";
|
|
clocks = <&core_clock>, <®_clock>;
|
|
};
|