mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-05 18:06:39 +07:00
cfe4fbfb23
Signed-off-by: Helge Deller <deller@gmx.de>
1051 lines
30 KiB
C
1051 lines
30 KiB
C
/*
|
|
** DINO manager
|
|
**
|
|
** (c) Copyright 1999 Red Hat Software
|
|
** (c) Copyright 1999 SuSE GmbH
|
|
** (c) Copyright 1999,2000 Hewlett-Packard Company
|
|
** (c) Copyright 2000 Grant Grundler
|
|
** (c) Copyright 2006 Helge Deller
|
|
**
|
|
** This program is free software; you can redistribute it and/or modify
|
|
** it under the terms of the GNU General Public License as published by
|
|
** the Free Software Foundation; either version 2 of the License, or
|
|
** (at your option) any later version.
|
|
**
|
|
** This module provides access to Dino PCI bus (config/IOport spaces)
|
|
** and helps manage Dino IRQ lines.
|
|
**
|
|
** Dino interrupt handling is a bit complicated.
|
|
** Dino always writes to the broadcast EIR via irr0 for now.
|
|
** (BIG WARNING: using broadcast EIR is a really bad thing for SMP!)
|
|
** Only one processor interrupt is used for the 11 IRQ line
|
|
** inputs to dino.
|
|
**
|
|
** The different between Built-in Dino and Card-Mode
|
|
** dino is in chip initialization and pci device initialization.
|
|
**
|
|
** Linux drivers can only use Card-Mode Dino if pci devices I/O port
|
|
** BARs are configured and used by the driver. Programming MMIO address
|
|
** requires substantial knowledge of available Host I/O address ranges
|
|
** is currently not supported. Port/Config accessor functions are the
|
|
** same. "BIOS" differences are handled within the existing routines.
|
|
*/
|
|
|
|
/* Changes :
|
|
** 2001-06-14 : Clement Moyroud (moyroudc@esiee.fr)
|
|
** - added support for the integrated RS232.
|
|
*/
|
|
|
|
/*
|
|
** TODO: create a virtual address for each Dino HPA.
|
|
** GSC code might be able to do this since IODC data tells us
|
|
** how many pages are used. PCI subsystem could (must?) do this
|
|
** for PCI drivers devices which implement/use MMIO registers.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/types.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/interrupt.h> /* for struct irqaction */
|
|
#include <linux/spinlock.h> /* for spinlock_t and prototypes */
|
|
|
|
#include <asm/pdc.h>
|
|
#include <asm/page.h>
|
|
#include <asm/io.h>
|
|
#include <asm/hardware.h>
|
|
|
|
#include "gsc.h"
|
|
|
|
#undef DINO_DEBUG
|
|
|
|
#ifdef DINO_DEBUG
|
|
#define DBG(x...) printk(x)
|
|
#else
|
|
#define DBG(x...)
|
|
#endif
|
|
|
|
/*
|
|
** Config accessor functions only pass in the 8-bit bus number
|
|
** and not the 8-bit "PCI Segment" number. Each Dino will be
|
|
** assigned a PCI bus number based on "when" it's discovered.
|
|
**
|
|
** The "secondary" bus number is set to this before calling
|
|
** pci_scan_bus(). If any PPB's are present, the scan will
|
|
** discover them and update the "secondary" and "subordinate"
|
|
** fields in Dino's pci_bus structure.
|
|
**
|
|
** Changes in the configuration *will* result in a different
|
|
** bus number for each dino.
|
|
*/
|
|
|
|
#define is_card_dino(id) ((id)->hw_type == HPHW_A_DMA)
|
|
#define is_cujo(id) ((id)->hversion == 0x682)
|
|
|
|
#define DINO_IAR0 0x004
|
|
#define DINO_IODC_ADDR 0x008
|
|
#define DINO_IODC_DATA_0 0x008
|
|
#define DINO_IODC_DATA_1 0x008
|
|
#define DINO_IRR0 0x00C
|
|
#define DINO_IAR1 0x010
|
|
#define DINO_IRR1 0x014
|
|
#define DINO_IMR 0x018
|
|
#define DINO_IPR 0x01C
|
|
#define DINO_TOC_ADDR 0x020
|
|
#define DINO_ICR 0x024
|
|
#define DINO_ILR 0x028
|
|
#define DINO_IO_COMMAND 0x030
|
|
#define DINO_IO_STATUS 0x034
|
|
#define DINO_IO_CONTROL 0x038
|
|
#define DINO_IO_GSC_ERR_RESP 0x040
|
|
#define DINO_IO_ERR_INFO 0x044
|
|
#define DINO_IO_PCI_ERR_RESP 0x048
|
|
#define DINO_IO_FBB_EN 0x05c
|
|
#define DINO_IO_ADDR_EN 0x060
|
|
#define DINO_PCI_ADDR 0x064
|
|
#define DINO_CONFIG_DATA 0x068
|
|
#define DINO_IO_DATA 0x06c
|
|
#define DINO_MEM_DATA 0x070 /* Dino 3.x only */
|
|
#define DINO_GSC2X_CONFIG 0x7b4
|
|
#define DINO_GMASK 0x800
|
|
#define DINO_PAMR 0x804
|
|
#define DINO_PAPR 0x808
|
|
#define DINO_DAMODE 0x80c
|
|
#define DINO_PCICMD 0x810
|
|
#define DINO_PCISTS 0x814
|
|
#define DINO_MLTIM 0x81c
|
|
#define DINO_BRDG_FEAT 0x820
|
|
#define DINO_PCIROR 0x824
|
|
#define DINO_PCIWOR 0x828
|
|
#define DINO_TLTIM 0x830
|
|
|
|
#define DINO_IRQS 11 /* bits 0-10 are architected */
|
|
#define DINO_IRR_MASK 0x5ff /* only 10 bits are implemented */
|
|
#define DINO_LOCAL_IRQS (DINO_IRQS+1)
|
|
|
|
#define DINO_MASK_IRQ(x) (1<<(x))
|
|
|
|
#define PCIINTA 0x001
|
|
#define PCIINTB 0x002
|
|
#define PCIINTC 0x004
|
|
#define PCIINTD 0x008
|
|
#define PCIINTE 0x010
|
|
#define PCIINTF 0x020
|
|
#define GSCEXTINT 0x040
|
|
/* #define xxx 0x080 - bit 7 is "default" */
|
|
/* #define xxx 0x100 - bit 8 not used */
|
|
/* #define xxx 0x200 - bit 9 not used */
|
|
#define RS232INT 0x400
|
|
|
|
struct dino_device
|
|
{
|
|
struct pci_hba_data hba; /* 'C' inheritance - must be first */
|
|
spinlock_t dinosaur_pen;
|
|
unsigned long txn_addr; /* EIR addr to generate interrupt */
|
|
u32 txn_data; /* EIR data assign to each dino */
|
|
u32 imr; /* IRQ's which are enabled */
|
|
int global_irq[DINO_LOCAL_IRQS]; /* map IMR bit to global irq */
|
|
#ifdef DINO_DEBUG
|
|
unsigned int dino_irr0; /* save most recent IRQ line stat */
|
|
#endif
|
|
};
|
|
|
|
/* Looks nice and keeps the compiler happy */
|
|
#define DINO_DEV(d) ({ \
|
|
void *__pdata = d; \
|
|
BUG_ON(!__pdata); \
|
|
(struct dino_device *)__pdata; })
|
|
|
|
|
|
/*
|
|
* Dino Configuration Space Accessor Functions
|
|
*/
|
|
|
|
#define DINO_CFG_TOK(bus,dfn,pos) ((u32) ((bus)<<16 | (dfn)<<8 | (pos)))
|
|
|
|
/*
|
|
* keep the current highest bus count to assist in allocating busses. This
|
|
* tries to keep a global bus count total so that when we discover an
|
|
* entirely new bus, it can be given a unique bus number.
|
|
*/
|
|
static int dino_current_bus = 0;
|
|
|
|
static int dino_cfg_read(struct pci_bus *bus, unsigned int devfn, int where,
|
|
int size, u32 *val)
|
|
{
|
|
struct dino_device *d = DINO_DEV(parisc_walk_tree(bus->bridge));
|
|
u32 local_bus = (bus->parent == NULL) ? 0 : bus->busn_res.start;
|
|
u32 v = DINO_CFG_TOK(local_bus, devfn, where & ~3);
|
|
void __iomem *base_addr = d->hba.base_addr;
|
|
unsigned long flags;
|
|
|
|
DBG("%s: %p, %d, %d, %d\n", __func__, base_addr, devfn, where,
|
|
size);
|
|
spin_lock_irqsave(&d->dinosaur_pen, flags);
|
|
|
|
/* tell HW which CFG address */
|
|
__raw_writel(v, base_addr + DINO_PCI_ADDR);
|
|
|
|
/* generate cfg read cycle */
|
|
if (size == 1) {
|
|
*val = readb(base_addr + DINO_CONFIG_DATA + (where & 3));
|
|
} else if (size == 2) {
|
|
*val = readw(base_addr + DINO_CONFIG_DATA + (where & 2));
|
|
} else if (size == 4) {
|
|
*val = readl(base_addr + DINO_CONFIG_DATA);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&d->dinosaur_pen, flags);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Dino address stepping "feature":
|
|
* When address stepping, Dino attempts to drive the bus one cycle too soon
|
|
* even though the type of cycle (config vs. MMIO) might be different.
|
|
* The read of Ven/Prod ID is harmless and avoids Dino's address stepping.
|
|
*/
|
|
static int dino_cfg_write(struct pci_bus *bus, unsigned int devfn, int where,
|
|
int size, u32 val)
|
|
{
|
|
struct dino_device *d = DINO_DEV(parisc_walk_tree(bus->bridge));
|
|
u32 local_bus = (bus->parent == NULL) ? 0 : bus->busn_res.start;
|
|
u32 v = DINO_CFG_TOK(local_bus, devfn, where & ~3);
|
|
void __iomem *base_addr = d->hba.base_addr;
|
|
unsigned long flags;
|
|
|
|
DBG("%s: %p, %d, %d, %d\n", __func__, base_addr, devfn, where,
|
|
size);
|
|
spin_lock_irqsave(&d->dinosaur_pen, flags);
|
|
|
|
/* avoid address stepping feature */
|
|
__raw_writel(v & 0xffffff00, base_addr + DINO_PCI_ADDR);
|
|
__raw_readl(base_addr + DINO_CONFIG_DATA);
|
|
|
|
/* tell HW which CFG address */
|
|
__raw_writel(v, base_addr + DINO_PCI_ADDR);
|
|
/* generate cfg read cycle */
|
|
if (size == 1) {
|
|
writeb(val, base_addr + DINO_CONFIG_DATA + (where & 3));
|
|
} else if (size == 2) {
|
|
writew(val, base_addr + DINO_CONFIG_DATA + (where & 2));
|
|
} else if (size == 4) {
|
|
writel(val, base_addr + DINO_CONFIG_DATA);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&d->dinosaur_pen, flags);
|
|
return 0;
|
|
}
|
|
|
|
static struct pci_ops dino_cfg_ops = {
|
|
.read = dino_cfg_read,
|
|
.write = dino_cfg_write,
|
|
};
|
|
|
|
|
|
/*
|
|
* Dino "I/O Port" Space Accessor Functions
|
|
*
|
|
* Many PCI devices don't require use of I/O port space (eg Tulip,
|
|
* NCR720) since they export the same registers to both MMIO and
|
|
* I/O port space. Performance is going to stink if drivers use
|
|
* I/O port instead of MMIO.
|
|
*/
|
|
|
|
#define DINO_PORT_IN(type, size, mask) \
|
|
static u##size dino_in##size (struct pci_hba_data *d, u16 addr) \
|
|
{ \
|
|
u##size v; \
|
|
unsigned long flags; \
|
|
spin_lock_irqsave(&(DINO_DEV(d)->dinosaur_pen), flags); \
|
|
/* tell HW which IO Port address */ \
|
|
__raw_writel((u32) addr, d->base_addr + DINO_PCI_ADDR); \
|
|
/* generate I/O PORT read cycle */ \
|
|
v = read##type(d->base_addr+DINO_IO_DATA+(addr&mask)); \
|
|
spin_unlock_irqrestore(&(DINO_DEV(d)->dinosaur_pen), flags); \
|
|
return v; \
|
|
}
|
|
|
|
DINO_PORT_IN(b, 8, 3)
|
|
DINO_PORT_IN(w, 16, 2)
|
|
DINO_PORT_IN(l, 32, 0)
|
|
|
|
#define DINO_PORT_OUT(type, size, mask) \
|
|
static void dino_out##size (struct pci_hba_data *d, u16 addr, u##size val) \
|
|
{ \
|
|
unsigned long flags; \
|
|
spin_lock_irqsave(&(DINO_DEV(d)->dinosaur_pen), flags); \
|
|
/* tell HW which IO port address */ \
|
|
__raw_writel((u32) addr, d->base_addr + DINO_PCI_ADDR); \
|
|
/* generate cfg write cycle */ \
|
|
write##type(val, d->base_addr+DINO_IO_DATA+(addr&mask)); \
|
|
spin_unlock_irqrestore(&(DINO_DEV(d)->dinosaur_pen), flags); \
|
|
}
|
|
|
|
DINO_PORT_OUT(b, 8, 3)
|
|
DINO_PORT_OUT(w, 16, 2)
|
|
DINO_PORT_OUT(l, 32, 0)
|
|
|
|
static struct pci_port_ops dino_port_ops = {
|
|
.inb = dino_in8,
|
|
.inw = dino_in16,
|
|
.inl = dino_in32,
|
|
.outb = dino_out8,
|
|
.outw = dino_out16,
|
|
.outl = dino_out32
|
|
};
|
|
|
|
static void dino_mask_irq(struct irq_data *d)
|
|
{
|
|
struct dino_device *dino_dev = irq_data_get_irq_chip_data(d);
|
|
int local_irq = gsc_find_local_irq(d->irq, dino_dev->global_irq, DINO_LOCAL_IRQS);
|
|
|
|
DBG(KERN_WARNING "%s(0x%p, %d)\n", __func__, dino_dev, d->irq);
|
|
|
|
/* Clear the matching bit in the IMR register */
|
|
dino_dev->imr &= ~(DINO_MASK_IRQ(local_irq));
|
|
__raw_writel(dino_dev->imr, dino_dev->hba.base_addr+DINO_IMR);
|
|
}
|
|
|
|
static void dino_unmask_irq(struct irq_data *d)
|
|
{
|
|
struct dino_device *dino_dev = irq_data_get_irq_chip_data(d);
|
|
int local_irq = gsc_find_local_irq(d->irq, dino_dev->global_irq, DINO_LOCAL_IRQS);
|
|
u32 tmp;
|
|
|
|
DBG(KERN_WARNING "%s(0x%p, %d)\n", __func__, dino_dev, d->irq);
|
|
|
|
/*
|
|
** clear pending IRQ bits
|
|
**
|
|
** This does NOT change ILR state!
|
|
** See comment below for ILR usage.
|
|
*/
|
|
__raw_readl(dino_dev->hba.base_addr+DINO_IPR);
|
|
|
|
/* set the matching bit in the IMR register */
|
|
dino_dev->imr |= DINO_MASK_IRQ(local_irq); /* used in dino_isr() */
|
|
__raw_writel( dino_dev->imr, dino_dev->hba.base_addr+DINO_IMR);
|
|
|
|
/* Emulate "Level Triggered" Interrupt
|
|
** Basically, a driver is blowing it if the IRQ line is asserted
|
|
** while the IRQ is disabled. But tulip.c seems to do that....
|
|
** Give 'em a kluge award and a nice round of applause!
|
|
**
|
|
** The gsc_write will generate an interrupt which invokes dino_isr().
|
|
** dino_isr() will read IPR and find nothing. But then catch this
|
|
** when it also checks ILR.
|
|
*/
|
|
tmp = __raw_readl(dino_dev->hba.base_addr+DINO_ILR);
|
|
if (tmp & DINO_MASK_IRQ(local_irq)) {
|
|
DBG(KERN_WARNING "%s(): IRQ asserted! (ILR 0x%x)\n",
|
|
__func__, tmp);
|
|
gsc_writel(dino_dev->txn_data, dino_dev->txn_addr);
|
|
}
|
|
}
|
|
|
|
static struct irq_chip dino_interrupt_type = {
|
|
.name = "GSC-PCI",
|
|
.irq_unmask = dino_unmask_irq,
|
|
.irq_mask = dino_mask_irq,
|
|
};
|
|
|
|
|
|
/*
|
|
* Handle a Processor interrupt generated by Dino.
|
|
*
|
|
* ilr_loop counter is a kluge to prevent a "stuck" IRQ line from
|
|
* wedging the CPU. Could be removed or made optional at some point.
|
|
*/
|
|
static irqreturn_t dino_isr(int irq, void *intr_dev)
|
|
{
|
|
struct dino_device *dino_dev = intr_dev;
|
|
u32 mask;
|
|
int ilr_loop = 100;
|
|
|
|
/* read and acknowledge pending interrupts */
|
|
#ifdef DINO_DEBUG
|
|
dino_dev->dino_irr0 =
|
|
#endif
|
|
mask = __raw_readl(dino_dev->hba.base_addr+DINO_IRR0) & DINO_IRR_MASK;
|
|
|
|
if (mask == 0)
|
|
return IRQ_NONE;
|
|
|
|
ilr_again:
|
|
do {
|
|
int local_irq = __ffs(mask);
|
|
int irq = dino_dev->global_irq[local_irq];
|
|
DBG(KERN_DEBUG "%s(%d, %p) mask 0x%x\n",
|
|
__func__, irq, intr_dev, mask);
|
|
generic_handle_irq(irq);
|
|
mask &= ~(1 << local_irq);
|
|
} while (mask);
|
|
|
|
/* Support for level triggered IRQ lines.
|
|
**
|
|
** Dropping this support would make this routine *much* faster.
|
|
** But since PCI requires level triggered IRQ line to share lines...
|
|
** device drivers may assume lines are level triggered (and not
|
|
** edge triggered like EISA/ISA can be).
|
|
*/
|
|
mask = __raw_readl(dino_dev->hba.base_addr+DINO_ILR) & dino_dev->imr;
|
|
if (mask) {
|
|
if (--ilr_loop > 0)
|
|
goto ilr_again;
|
|
printk(KERN_ERR "Dino 0x%p: stuck interrupt %d\n",
|
|
dino_dev->hba.base_addr, mask);
|
|
return IRQ_NONE;
|
|
}
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void dino_assign_irq(struct dino_device *dino, int local_irq, int *irqp)
|
|
{
|
|
int irq = gsc_assign_irq(&dino_interrupt_type, dino);
|
|
if (irq == NO_IRQ)
|
|
return;
|
|
|
|
*irqp = irq;
|
|
dino->global_irq[local_irq] = irq;
|
|
}
|
|
|
|
static void dino_choose_irq(struct parisc_device *dev, void *ctrl)
|
|
{
|
|
int irq;
|
|
struct dino_device *dino = ctrl;
|
|
|
|
switch (dev->id.sversion) {
|
|
case 0x00084: irq = 8; break; /* PS/2 */
|
|
case 0x0008c: irq = 10; break; /* RS232 */
|
|
case 0x00096: irq = 8; break; /* PS/2 */
|
|
default: return; /* Unknown */
|
|
}
|
|
|
|
dino_assign_irq(dino, irq, &dev->irq);
|
|
}
|
|
|
|
|
|
/*
|
|
* Cirrus 6832 Cardbus reports wrong irq on RDI Tadpole PARISC Laptop (deller@gmx.de)
|
|
* (the irqs are off-by-one, not sure yet if this is a cirrus, dino-hardware or dino-driver problem...)
|
|
*/
|
|
static void quirk_cirrus_cardbus(struct pci_dev *dev)
|
|
{
|
|
u8 new_irq = dev->irq - 1;
|
|
printk(KERN_INFO "PCI: Cirrus Cardbus IRQ fixup for %s, from %d to %d\n",
|
|
pci_name(dev), dev->irq, new_irq);
|
|
dev->irq = new_irq;
|
|
}
|
|
DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_CIRRUS, PCI_DEVICE_ID_CIRRUS_6832, quirk_cirrus_cardbus );
|
|
|
|
|
|
static void __init
|
|
dino_bios_init(void)
|
|
{
|
|
DBG("dino_bios_init\n");
|
|
}
|
|
|
|
/*
|
|
* dino_card_setup - Set up the memory space for a Dino in card mode.
|
|
* @bus: the bus under this dino
|
|
*
|
|
* Claim an 8MB chunk of unused IO space and call the generic PCI routines
|
|
* to set up the addresses of the devices on this bus.
|
|
*/
|
|
#define _8MB 0x00800000UL
|
|
static void __init
|
|
dino_card_setup(struct pci_bus *bus, void __iomem *base_addr)
|
|
{
|
|
int i;
|
|
struct dino_device *dino_dev = DINO_DEV(parisc_walk_tree(bus->bridge));
|
|
struct resource *res;
|
|
char name[128];
|
|
int size;
|
|
|
|
res = &dino_dev->hba.lmmio_space;
|
|
res->flags = IORESOURCE_MEM;
|
|
size = scnprintf(name, sizeof(name), "Dino LMMIO (%s)",
|
|
dev_name(bus->bridge));
|
|
res->name = kmalloc(size+1, GFP_KERNEL);
|
|
if(res->name)
|
|
strcpy((char *)res->name, name);
|
|
else
|
|
res->name = dino_dev->hba.lmmio_space.name;
|
|
|
|
|
|
if (ccio_allocate_resource(dino_dev->hba.dev, res, _8MB,
|
|
F_EXTEND(0xf0000000UL) | _8MB,
|
|
F_EXTEND(0xffffffffUL) &~ _8MB, _8MB) < 0) {
|
|
struct pci_dev *dev, *tmp;
|
|
|
|
printk(KERN_ERR "Dino: cannot attach bus %s\n",
|
|
dev_name(bus->bridge));
|
|
/* kill the bus, we can't do anything with it */
|
|
list_for_each_entry_safe(dev, tmp, &bus->devices, bus_list) {
|
|
list_del(&dev->bus_list);
|
|
}
|
|
|
|
return;
|
|
}
|
|
bus->resource[1] = res;
|
|
bus->resource[0] = &(dino_dev->hba.io_space);
|
|
|
|
/* Now tell dino what range it has */
|
|
for (i = 1; i < 31; i++) {
|
|
if (res->start == F_EXTEND(0xf0000000UL | (i * _8MB)))
|
|
break;
|
|
}
|
|
DBG("DINO GSC WRITE i=%d, start=%lx, dino addr = %p\n",
|
|
i, res->start, base_addr + DINO_IO_ADDR_EN);
|
|
__raw_writel(1 << i, base_addr + DINO_IO_ADDR_EN);
|
|
}
|
|
|
|
static void __init
|
|
dino_card_fixup(struct pci_dev *dev)
|
|
{
|
|
u32 irq_pin;
|
|
|
|
/*
|
|
** REVISIT: card-mode PCI-PCI expansion chassis do exist.
|
|
** Not sure they were ever productized.
|
|
** Die here since we'll die later in dino_inb() anyway.
|
|
*/
|
|
if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
|
|
panic("Card-Mode Dino: PCI-PCI Bridge not supported\n");
|
|
}
|
|
|
|
/*
|
|
** Set Latency Timer to 0xff (not a shared bus)
|
|
** Set CACHELINE_SIZE.
|
|
*/
|
|
dino_cfg_write(dev->bus, dev->devfn,
|
|
PCI_CACHE_LINE_SIZE, 2, 0xff00 | L1_CACHE_BYTES/4);
|
|
|
|
/*
|
|
** Program INT_LINE for card-mode devices.
|
|
** The cards are hardwired according to this algorithm.
|
|
** And it doesn't matter if PPB's are present or not since
|
|
** the IRQ lines bypass the PPB.
|
|
**
|
|
** "-1" converts INTA-D (1-4) to PCIINTA-D (0-3) range.
|
|
** The additional "-1" adjusts for skewing the IRQ<->slot.
|
|
*/
|
|
dino_cfg_read(dev->bus, dev->devfn, PCI_INTERRUPT_PIN, 1, &irq_pin);
|
|
dev->irq = pci_swizzle_interrupt_pin(dev, irq_pin) - 1;
|
|
|
|
/* Shouldn't really need to do this but it's in case someone tries
|
|
** to bypass PCI services and look at the card themselves.
|
|
*/
|
|
dino_cfg_write(dev->bus, dev->devfn, PCI_INTERRUPT_LINE, 1, dev->irq);
|
|
}
|
|
|
|
/* The alignment contraints for PCI bridges under dino */
|
|
#define DINO_BRIDGE_ALIGN 0x100000
|
|
|
|
|
|
static void __init
|
|
dino_fixup_bus(struct pci_bus *bus)
|
|
{
|
|
struct pci_dev *dev;
|
|
struct dino_device *dino_dev = DINO_DEV(parisc_walk_tree(bus->bridge));
|
|
|
|
DBG(KERN_WARNING "%s(0x%p) bus %d platform_data 0x%p\n",
|
|
__func__, bus, bus->busn_res.start,
|
|
bus->bridge->platform_data);
|
|
|
|
/* Firmware doesn't set up card-mode dino, so we have to */
|
|
if (is_card_dino(&dino_dev->hba.dev->id)) {
|
|
dino_card_setup(bus, dino_dev->hba.base_addr);
|
|
} else if (bus->parent) {
|
|
int i;
|
|
|
|
pci_read_bridge_bases(bus);
|
|
|
|
|
|
for(i = PCI_BRIDGE_RESOURCES; i < PCI_NUM_RESOURCES; i++) {
|
|
if((bus->self->resource[i].flags &
|
|
(IORESOURCE_IO | IORESOURCE_MEM)) == 0)
|
|
continue;
|
|
|
|
if(bus->self->resource[i].flags & IORESOURCE_MEM) {
|
|
/* There's a quirk to alignment of
|
|
* bridge memory resources: the start
|
|
* is the alignment and start-end is
|
|
* the size. However, firmware will
|
|
* have assigned start and end, so we
|
|
* need to take this into account */
|
|
bus->self->resource[i].end = bus->self->resource[i].end - bus->self->resource[i].start + DINO_BRIDGE_ALIGN;
|
|
bus->self->resource[i].start = DINO_BRIDGE_ALIGN;
|
|
|
|
}
|
|
|
|
DBG("DEBUG %s assigning %d [%pR]\n",
|
|
dev_name(&bus->self->dev), i,
|
|
&bus->self->resource[i]);
|
|
WARN_ON(pci_assign_resource(bus->self, i));
|
|
DBG("DEBUG %s after assign %d [%pR]\n",
|
|
dev_name(&bus->self->dev), i,
|
|
&bus->self->resource[i]);
|
|
}
|
|
}
|
|
|
|
|
|
list_for_each_entry(dev, &bus->devices, bus_list) {
|
|
if (is_card_dino(&dino_dev->hba.dev->id))
|
|
dino_card_fixup(dev);
|
|
|
|
/*
|
|
** P2PB's only have 2 BARs, no IRQs.
|
|
** I'd like to just ignore them for now.
|
|
*/
|
|
if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
|
|
pcibios_init_bridge(dev);
|
|
continue;
|
|
}
|
|
|
|
/* null out the ROM resource if there is one (we don't
|
|
* care about an expansion rom on parisc, since it
|
|
* usually contains (x86) bios code) */
|
|
dev->resource[PCI_ROM_RESOURCE].flags = 0;
|
|
|
|
if(dev->irq == 255) {
|
|
|
|
#define DINO_FIX_UNASSIGNED_INTERRUPTS
|
|
#ifdef DINO_FIX_UNASSIGNED_INTERRUPTS
|
|
|
|
/* This code tries to assign an unassigned
|
|
* interrupt. Leave it disabled unless you
|
|
* *really* know what you're doing since the
|
|
* pin<->interrupt line mapping varies by bus
|
|
* and machine */
|
|
|
|
u32 irq_pin;
|
|
|
|
dino_cfg_read(dev->bus, dev->devfn,
|
|
PCI_INTERRUPT_PIN, 1, &irq_pin);
|
|
irq_pin = pci_swizzle_interrupt_pin(dev, irq_pin) - 1;
|
|
printk(KERN_WARNING "Device %s has undefined IRQ, "
|
|
"setting to %d\n", pci_name(dev), irq_pin);
|
|
dino_cfg_write(dev->bus, dev->devfn,
|
|
PCI_INTERRUPT_LINE, 1, irq_pin);
|
|
dino_assign_irq(dino_dev, irq_pin, &dev->irq);
|
|
#else
|
|
dev->irq = 65535;
|
|
printk(KERN_WARNING "Device %s has unassigned IRQ\n", pci_name(dev));
|
|
#endif
|
|
} else {
|
|
/* Adjust INT_LINE for that busses region */
|
|
dino_assign_irq(dino_dev, dev->irq, &dev->irq);
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
static struct pci_bios_ops dino_bios_ops = {
|
|
.init = dino_bios_init,
|
|
.fixup_bus = dino_fixup_bus
|
|
};
|
|
|
|
|
|
/*
|
|
* Initialise a DINO controller chip
|
|
*/
|
|
static void __init
|
|
dino_card_init(struct dino_device *dino_dev)
|
|
{
|
|
u32 brdg_feat = 0x00784e05;
|
|
unsigned long status;
|
|
|
|
status = __raw_readl(dino_dev->hba.base_addr+DINO_IO_STATUS);
|
|
if (status & 0x0000ff80) {
|
|
__raw_writel(0x00000005,
|
|
dino_dev->hba.base_addr+DINO_IO_COMMAND);
|
|
udelay(1);
|
|
}
|
|
|
|
__raw_writel(0x00000000, dino_dev->hba.base_addr+DINO_GMASK);
|
|
__raw_writel(0x00000001, dino_dev->hba.base_addr+DINO_IO_FBB_EN);
|
|
__raw_writel(0x00000000, dino_dev->hba.base_addr+DINO_ICR);
|
|
|
|
#if 1
|
|
/* REVISIT - should be a runtime check (eg if (CPU_IS_PCX_L) ...) */
|
|
/*
|
|
** PCX-L processors don't support XQL like Dino wants it.
|
|
** PCX-L2 ignore XQL signal and it doesn't matter.
|
|
*/
|
|
brdg_feat &= ~0x4; /* UXQL */
|
|
#endif
|
|
__raw_writel( brdg_feat, dino_dev->hba.base_addr+DINO_BRDG_FEAT);
|
|
|
|
/*
|
|
** Don't enable address decoding until we know which I/O range
|
|
** currently is available from the host. Only affects MMIO
|
|
** and not I/O port space.
|
|
*/
|
|
__raw_writel(0x00000000, dino_dev->hba.base_addr+DINO_IO_ADDR_EN);
|
|
|
|
__raw_writel(0x00000000, dino_dev->hba.base_addr+DINO_DAMODE);
|
|
__raw_writel(0x00222222, dino_dev->hba.base_addr+DINO_PCIROR);
|
|
__raw_writel(0x00222222, dino_dev->hba.base_addr+DINO_PCIWOR);
|
|
|
|
__raw_writel(0x00000040, dino_dev->hba.base_addr+DINO_MLTIM);
|
|
__raw_writel(0x00000080, dino_dev->hba.base_addr+DINO_IO_CONTROL);
|
|
__raw_writel(0x0000008c, dino_dev->hba.base_addr+DINO_TLTIM);
|
|
|
|
/* Disable PAMR before writing PAPR */
|
|
__raw_writel(0x0000007e, dino_dev->hba.base_addr+DINO_PAMR);
|
|
__raw_writel(0x0000007f, dino_dev->hba.base_addr+DINO_PAPR);
|
|
__raw_writel(0x00000000, dino_dev->hba.base_addr+DINO_PAMR);
|
|
|
|
/*
|
|
** Dino ERS encourages enabling FBB (0x6f).
|
|
** We can't until we know *all* devices below us can support it.
|
|
** (Something in device configuration header tells us).
|
|
*/
|
|
__raw_writel(0x0000004f, dino_dev->hba.base_addr+DINO_PCICMD);
|
|
|
|
/* Somewhere, the PCI spec says give devices 1 second
|
|
** to recover from the #RESET being de-asserted.
|
|
** Experience shows most devices only need 10ms.
|
|
** This short-cut speeds up booting significantly.
|
|
*/
|
|
mdelay(pci_post_reset_delay);
|
|
}
|
|
|
|
static int __init
|
|
dino_bridge_init(struct dino_device *dino_dev, const char *name)
|
|
{
|
|
unsigned long io_addr;
|
|
int result, i, count=0;
|
|
struct resource *res, *prevres = NULL;
|
|
/*
|
|
* Decoding IO_ADDR_EN only works for Built-in Dino
|
|
* since PDC has already initialized this.
|
|
*/
|
|
|
|
io_addr = __raw_readl(dino_dev->hba.base_addr + DINO_IO_ADDR_EN);
|
|
if (io_addr == 0) {
|
|
printk(KERN_WARNING "%s: No PCI devices enabled.\n", name);
|
|
return -ENODEV;
|
|
}
|
|
|
|
res = &dino_dev->hba.lmmio_space;
|
|
for (i = 0; i < 32; i++) {
|
|
unsigned long start, end;
|
|
|
|
if((io_addr & (1 << i)) == 0)
|
|
continue;
|
|
|
|
start = F_EXTEND(0xf0000000UL) | (i << 23);
|
|
end = start + 8 * 1024 * 1024 - 1;
|
|
|
|
DBG("DINO RANGE %d is at 0x%lx-0x%lx\n", count,
|
|
start, end);
|
|
|
|
if(prevres && prevres->end + 1 == start) {
|
|
prevres->end = end;
|
|
} else {
|
|
if(count >= DINO_MAX_LMMIO_RESOURCES) {
|
|
printk(KERN_ERR "%s is out of resource windows for range %d (0x%lx-0x%lx)\n", name, count, start, end);
|
|
break;
|
|
}
|
|
prevres = res;
|
|
res->start = start;
|
|
res->end = end;
|
|
res->flags = IORESOURCE_MEM;
|
|
res->name = kmalloc(64, GFP_KERNEL);
|
|
if(res->name)
|
|
snprintf((char *)res->name, 64, "%s LMMIO %d",
|
|
name, count);
|
|
res++;
|
|
count++;
|
|
}
|
|
}
|
|
|
|
res = &dino_dev->hba.lmmio_space;
|
|
|
|
for(i = 0; i < DINO_MAX_LMMIO_RESOURCES; i++) {
|
|
if(res[i].flags == 0)
|
|
break;
|
|
|
|
result = ccio_request_resource(dino_dev->hba.dev, &res[i]);
|
|
if (result < 0) {
|
|
printk(KERN_ERR "%s: failed to claim PCI Bus address "
|
|
"space %d (%pR)!\n", name, i, &res[i]);
|
|
return result;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int __init dino_common_init(struct parisc_device *dev,
|
|
struct dino_device *dino_dev, const char *name)
|
|
{
|
|
int status;
|
|
u32 eim;
|
|
struct gsc_irq gsc_irq;
|
|
struct resource *res;
|
|
|
|
pcibios_register_hba(&dino_dev->hba);
|
|
|
|
pci_bios = &dino_bios_ops; /* used by pci_scan_bus() */
|
|
pci_port = &dino_port_ops;
|
|
|
|
/*
|
|
** Note: SMP systems can make use of IRR1/IAR1 registers
|
|
** But it won't buy much performance except in very
|
|
** specific applications/configurations. Note Dino
|
|
** still only has 11 IRQ input lines - just map some of them
|
|
** to a different processor.
|
|
*/
|
|
dev->irq = gsc_alloc_irq(&gsc_irq);
|
|
dino_dev->txn_addr = gsc_irq.txn_addr;
|
|
dino_dev->txn_data = gsc_irq.txn_data;
|
|
eim = ((u32) gsc_irq.txn_addr) | gsc_irq.txn_data;
|
|
|
|
/*
|
|
** Dino needs a PA "IRQ" to get a processor's attention.
|
|
** arch/parisc/kernel/irq.c returns an EIRR bit.
|
|
*/
|
|
if (dev->irq < 0) {
|
|
printk(KERN_WARNING "%s: gsc_alloc_irq() failed\n", name);
|
|
return 1;
|
|
}
|
|
|
|
status = request_irq(dev->irq, dino_isr, 0, name, dino_dev);
|
|
if (status) {
|
|
printk(KERN_WARNING "%s: request_irq() failed with %d\n",
|
|
name, status);
|
|
return 1;
|
|
}
|
|
|
|
/* Support the serial port which is sometimes attached on built-in
|
|
* Dino / Cujo chips.
|
|
*/
|
|
|
|
gsc_fixup_irqs(dev, dino_dev, dino_choose_irq);
|
|
|
|
/*
|
|
** This enables DINO to generate interrupts when it sees
|
|
** any of its inputs *change*. Just asserting an IRQ
|
|
** before it's enabled (ie unmasked) isn't good enough.
|
|
*/
|
|
__raw_writel(eim, dino_dev->hba.base_addr+DINO_IAR0);
|
|
|
|
/*
|
|
** Some platforms don't clear Dino's IRR0 register at boot time.
|
|
** Reading will clear it now.
|
|
*/
|
|
__raw_readl(dino_dev->hba.base_addr+DINO_IRR0);
|
|
|
|
/* allocate I/O Port resource region */
|
|
res = &dino_dev->hba.io_space;
|
|
if (!is_cujo(&dev->id)) {
|
|
res->name = "Dino I/O Port";
|
|
} else {
|
|
res->name = "Cujo I/O Port";
|
|
}
|
|
res->start = HBA_PORT_BASE(dino_dev->hba.hba_num);
|
|
res->end = res->start + (HBA_PORT_SPACE_SIZE - 1);
|
|
res->flags = IORESOURCE_IO; /* do not mark it busy ! */
|
|
if (request_resource(&ioport_resource, res) < 0) {
|
|
printk(KERN_ERR "%s: request I/O Port region failed "
|
|
"0x%lx/%lx (hpa 0x%p)\n",
|
|
name, (unsigned long)res->start, (unsigned long)res->end,
|
|
dino_dev->hba.base_addr);
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define CUJO_RAVEN_ADDR F_EXTEND(0xf1000000UL)
|
|
#define CUJO_FIREHAWK_ADDR F_EXTEND(0xf1604000UL)
|
|
#define CUJO_RAVEN_BADPAGE 0x01003000UL
|
|
#define CUJO_FIREHAWK_BADPAGE 0x01607000UL
|
|
|
|
static const char *dino_vers[] = {
|
|
"2.0",
|
|
"2.1",
|
|
"3.0",
|
|
"3.1"
|
|
};
|
|
|
|
static const char *cujo_vers[] = {
|
|
"1.0",
|
|
"2.0"
|
|
};
|
|
|
|
void ccio_cujo20_fixup(struct parisc_device *dev, u32 iovp);
|
|
|
|
/*
|
|
** Determine if dino should claim this chip (return 0) or not (return 1).
|
|
** If so, initialize the chip appropriately (card-mode vs bridge mode).
|
|
** Much of the initialization is common though.
|
|
*/
|
|
static int __init dino_probe(struct parisc_device *dev)
|
|
{
|
|
struct dino_device *dino_dev; // Dino specific control struct
|
|
const char *version = "unknown";
|
|
char *name;
|
|
int is_cujo = 0;
|
|
LIST_HEAD(resources);
|
|
struct pci_bus *bus;
|
|
unsigned long hpa = dev->hpa.start;
|
|
int max;
|
|
|
|
name = "Dino";
|
|
if (is_card_dino(&dev->id)) {
|
|
version = "3.x (card mode)";
|
|
} else {
|
|
if (!is_cujo(&dev->id)) {
|
|
if (dev->id.hversion_rev < 4) {
|
|
version = dino_vers[dev->id.hversion_rev];
|
|
}
|
|
} else {
|
|
name = "Cujo";
|
|
is_cujo = 1;
|
|
if (dev->id.hversion_rev < 2) {
|
|
version = cujo_vers[dev->id.hversion_rev];
|
|
}
|
|
}
|
|
}
|
|
|
|
printk("%s version %s found at 0x%lx\n", name, version, hpa);
|
|
|
|
if (!request_mem_region(hpa, PAGE_SIZE, name)) {
|
|
printk(KERN_ERR "DINO: Hey! Someone took my MMIO space (0x%lx)!\n",
|
|
hpa);
|
|
return 1;
|
|
}
|
|
|
|
/* Check for bugs */
|
|
if (is_cujo && dev->id.hversion_rev == 1) {
|
|
#ifdef CONFIG_IOMMU_CCIO
|
|
printk(KERN_WARNING "Enabling Cujo 2.0 bug workaround\n");
|
|
if (hpa == (unsigned long)CUJO_RAVEN_ADDR) {
|
|
ccio_cujo20_fixup(dev, CUJO_RAVEN_BADPAGE);
|
|
} else if (hpa == (unsigned long)CUJO_FIREHAWK_ADDR) {
|
|
ccio_cujo20_fixup(dev, CUJO_FIREHAWK_BADPAGE);
|
|
} else {
|
|
printk("Don't recognise Cujo at address 0x%lx, not enabling workaround\n", hpa);
|
|
}
|
|
#endif
|
|
} else if (!is_cujo && !is_card_dino(&dev->id) &&
|
|
dev->id.hversion_rev < 3) {
|
|
printk(KERN_WARNING
|
|
"The GSCtoPCI (Dino hrev %d) bus converter found may exhibit\n"
|
|
"data corruption. See Service Note Numbers: A4190A-01, A4191A-01.\n"
|
|
"Systems shipped after Aug 20, 1997 will not exhibit this problem.\n"
|
|
"Models affected: C180, C160, C160L, B160L, and B132L workstations.\n\n",
|
|
dev->id.hversion_rev);
|
|
/* REVISIT: why are C200/C240 listed in the README table but not
|
|
** "Models affected"? Could be an omission in the original literature.
|
|
*/
|
|
}
|
|
|
|
dino_dev = kzalloc(sizeof(struct dino_device), GFP_KERNEL);
|
|
if (!dino_dev) {
|
|
printk("dino_init_chip - couldn't alloc dino_device\n");
|
|
return 1;
|
|
}
|
|
|
|
dino_dev->hba.dev = dev;
|
|
dino_dev->hba.base_addr = ioremap_nocache(hpa, 4096);
|
|
dino_dev->hba.lmmio_space_offset = PCI_F_EXTEND;
|
|
spin_lock_init(&dino_dev->dinosaur_pen);
|
|
dino_dev->hba.iommu = ccio_get_iommu(dev);
|
|
|
|
if (is_card_dino(&dev->id)) {
|
|
dino_card_init(dino_dev);
|
|
} else {
|
|
dino_bridge_init(dino_dev, name);
|
|
}
|
|
|
|
if (dino_common_init(dev, dino_dev, name))
|
|
return 1;
|
|
|
|
dev->dev.platform_data = dino_dev;
|
|
|
|
pci_add_resource_offset(&resources, &dino_dev->hba.io_space,
|
|
HBA_PORT_BASE(dino_dev->hba.hba_num));
|
|
if (dino_dev->hba.lmmio_space.flags)
|
|
pci_add_resource_offset(&resources, &dino_dev->hba.lmmio_space,
|
|
dino_dev->hba.lmmio_space_offset);
|
|
if (dino_dev->hba.elmmio_space.flags)
|
|
pci_add_resource_offset(&resources, &dino_dev->hba.elmmio_space,
|
|
dino_dev->hba.lmmio_space_offset);
|
|
if (dino_dev->hba.gmmio_space.flags)
|
|
pci_add_resource(&resources, &dino_dev->hba.gmmio_space);
|
|
|
|
dino_dev->hba.bus_num.start = dino_current_bus;
|
|
dino_dev->hba.bus_num.end = 255;
|
|
dino_dev->hba.bus_num.flags = IORESOURCE_BUS;
|
|
pci_add_resource(&resources, &dino_dev->hba.bus_num);
|
|
/*
|
|
** It's not used to avoid chicken/egg problems
|
|
** with configuration accessor functions.
|
|
*/
|
|
dino_dev->hba.hba_bus = bus = pci_create_root_bus(&dev->dev,
|
|
dino_current_bus, &dino_cfg_ops, NULL, &resources);
|
|
if (!bus) {
|
|
printk(KERN_ERR "ERROR: failed to scan PCI bus on %s (duplicate bus number %d?)\n",
|
|
dev_name(&dev->dev), dino_current_bus);
|
|
pci_free_resource_list(&resources);
|
|
/* increment the bus number in case of duplicates */
|
|
dino_current_bus++;
|
|
return 0;
|
|
}
|
|
|
|
max = pci_scan_child_bus(bus);
|
|
pci_bus_update_busn_res_end(bus, max);
|
|
|
|
/* This code *depends* on scanning being single threaded
|
|
* if it isn't, this global bus number count will fail
|
|
*/
|
|
dino_current_bus = max + 1;
|
|
pci_bus_assign_resources(bus);
|
|
pci_bus_add_devices(bus);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Normally, we would just test sversion. But the Elroy PCI adapter has
|
|
* the same sversion as Dino, so we have to check hversion as well.
|
|
* Unfortunately, the J2240 PDC reports the wrong hversion for the first
|
|
* Dino, so we have to test for Dino, Cujo and Dino-in-a-J2240.
|
|
* For card-mode Dino, most machines report an sversion of 9D. But 715
|
|
* and 725 firmware misreport it as 0x08080 for no adequately explained
|
|
* reason.
|
|
*/
|
|
static const struct parisc_device_id dino_tbl[] __initconst = {
|
|
{ HPHW_A_DMA, HVERSION_REV_ANY_ID, 0x004, 0x0009D },/* Card-mode Dino */
|
|
{ HPHW_A_DMA, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x08080 }, /* XXX */
|
|
{ HPHW_BRIDGE, HVERSION_REV_ANY_ID, 0x680, 0xa }, /* Bridge-mode Dino */
|
|
{ HPHW_BRIDGE, HVERSION_REV_ANY_ID, 0x682, 0xa }, /* Bridge-mode Cujo */
|
|
{ HPHW_BRIDGE, HVERSION_REV_ANY_ID, 0x05d, 0xa }, /* Dino in a J2240 */
|
|
{ 0, }
|
|
};
|
|
|
|
static struct parisc_driver dino_driver __refdata = {
|
|
.name = "dino",
|
|
.id_table = dino_tbl,
|
|
.probe = dino_probe,
|
|
};
|
|
|
|
/*
|
|
* One time initialization to let the world know Dino is here.
|
|
* This is the only routine which is NOT static.
|
|
* Must be called exactly once before pci_init().
|
|
*/
|
|
int __init dino_init(void)
|
|
{
|
|
register_parisc_driver(&dino_driver);
|
|
return 0;
|
|
}
|
|
|