linux_dsm_epyc7002/drivers/edac/edac_module.h
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

130 lines
4.6 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
/*
* edac_module.h
*
* For defining functions/data for within the EDAC_CORE module only
*
* written by doug thompson <norsk5@xmission.h>
*/
#ifndef __EDAC_MODULE_H__
#define __EDAC_MODULE_H__
#include "edac_mc.h"
#include "edac_pci.h"
#include "edac_device.h"
/*
* INTERNAL EDAC MODULE:
* EDAC memory controller sysfs create/remove functions
* and setup/teardown functions
*
* edac_mc objects
*/
/* on edac_mc_sysfs.c */
int edac_mc_sysfs_init(void);
void edac_mc_sysfs_exit(void);
extern int edac_create_sysfs_mci_device(struct mem_ctl_info *mci,
const struct attribute_group **groups);
extern void edac_remove_sysfs_mci_device(struct mem_ctl_info *mci);
void edac_unregister_sysfs(struct mem_ctl_info *mci);
extern int edac_get_log_ue(void);
extern int edac_get_log_ce(void);
extern int edac_get_panic_on_ue(void);
extern int edac_mc_get_log_ue(void);
extern int edac_mc_get_log_ce(void);
extern int edac_mc_get_panic_on_ue(void);
extern int edac_get_poll_msec(void);
extern int edac_mc_get_poll_msec(void);
unsigned edac_dimm_info_location(struct dimm_info *dimm, char *buf,
unsigned len);
/* on edac_device.c */
extern int edac_device_register_sysfs_main_kobj(
struct edac_device_ctl_info *edac_dev);
extern void edac_device_unregister_sysfs_main_kobj(
struct edac_device_ctl_info *edac_dev);
extern int edac_device_create_sysfs(struct edac_device_ctl_info *edac_dev);
extern void edac_device_remove_sysfs(struct edac_device_ctl_info *edac_dev);
/* edac core workqueue: single CPU mode */
int edac_workqueue_setup(void);
void edac_workqueue_teardown(void);
bool edac_queue_work(struct delayed_work *work, unsigned long delay);
bool edac_stop_work(struct delayed_work *work);
bool edac_mod_work(struct delayed_work *work, unsigned long delay);
extern void edac_device_reset_delay_period(struct edac_device_ctl_info
*edac_dev, unsigned long value);
extern void edac_mc_reset_delay_period(unsigned long value);
extern void *edac_align_ptr(void **p, unsigned size, int n_elems);
/*
* EDAC debugfs functions
*/
#define edac_debugfs_remove_recursive debugfs_remove_recursive
#define edac_debugfs_remove debugfs_remove
#ifdef CONFIG_EDAC_DEBUG
int edac_debugfs_init(void);
void edac_debugfs_exit(void);
int edac_create_debugfs_nodes(struct mem_ctl_info *mci);
struct dentry *edac_debugfs_create_dir(const char *dirname);
struct dentry *
edac_debugfs_create_dir_at(const char *dirname, struct dentry *parent);
struct dentry *
edac_debugfs_create_file(const char *name, umode_t mode, struct dentry *parent,
void *data, const struct file_operations *fops);
struct dentry *
edac_debugfs_create_x8(const char *name, umode_t mode, struct dentry *parent, u8 *value);
struct dentry *
edac_debugfs_create_x16(const char *name, umode_t mode, struct dentry *parent, u16 *value);
#else
static inline int edac_debugfs_init(void) { return -ENODEV; }
static inline void edac_debugfs_exit(void) { }
static inline int edac_create_debugfs_nodes(struct mem_ctl_info *mci) { return 0; }
static inline struct dentry *edac_debugfs_create_dir(const char *dirname) { return NULL; }
static inline struct dentry *
edac_debugfs_create_dir_at(const char *dirname, struct dentry *parent) { return NULL; }
static inline struct dentry *
edac_debugfs_create_file(const char *name, umode_t mode, struct dentry *parent,
void *data, const struct file_operations *fops) { return NULL; }
static inline struct dentry *
edac_debugfs_create_x8(const char *name, umode_t mode,
struct dentry *parent, u8 *value) { return NULL; }
static inline struct dentry *
edac_debugfs_create_x16(const char *name, umode_t mode,
struct dentry *parent, u16 *value) { return NULL; }
#endif
/*
* EDAC PCI functions
*/
#ifdef CONFIG_PCI
extern void edac_pci_do_parity_check(void);
extern void edac_pci_clear_parity_errors(void);
extern int edac_sysfs_pci_setup(void);
extern void edac_sysfs_pci_teardown(void);
extern int edac_pci_get_check_errors(void);
extern int edac_pci_get_poll_msec(void);
extern void edac_pci_remove_sysfs(struct edac_pci_ctl_info *pci);
extern void edac_pci_handle_pe(struct edac_pci_ctl_info *pci, const char *msg);
extern void edac_pci_handle_npe(struct edac_pci_ctl_info *pci,
const char *msg);
#else /* CONFIG_PCI */
/* pre-process these away */
#define edac_pci_do_parity_check()
#define edac_pci_clear_parity_errors()
#define edac_sysfs_pci_setup() (0)
#define edac_sysfs_pci_teardown()
#define edac_pci_get_check_errors()
#define edac_pci_get_poll_msec()
#define edac_pci_handle_pe()
#define edac_pci_handle_npe()
#endif /* CONFIG_PCI */
#endif /* __EDAC_MODULE_H__ */