mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-24 08:16:45 +07:00
ca3226d389
Add unit-addresses to nodes that have a reg property to avoid warnings on newer versions of DTC. Signed-off-by: Thierry Reding <treding@nvidia.com>
352 lines
7.4 KiB
Plaintext
352 lines
7.4 KiB
Plaintext
/dts-v1/;
|
|
|
|
#include <dt-bindings/input/input.h>
|
|
#include "tegra114.dtsi"
|
|
|
|
/ {
|
|
model = "Tegra Note 7";
|
|
compatible = "nvidia,tn7", "nvidia,tegra114";
|
|
|
|
chosen {
|
|
/* TN7's bootloader's arguments need to be overridden */
|
|
bootargs = "console=ttyS0,115200n8 console=tty1 gpt fbcon=rotate:2";
|
|
/* TN7's bootloader will place initrd at this address */
|
|
linux,initrd-start = <0x82000000>;
|
|
linux,initrd-end = <0x82800000>;
|
|
};
|
|
|
|
aliases {
|
|
serial0 = &uartd;
|
|
};
|
|
|
|
firmware {
|
|
trusted-foundations {
|
|
compatible = "tlm,trusted-foundations";
|
|
tlm,version-major = <2>;
|
|
tlm,version-minor = <8>;
|
|
};
|
|
};
|
|
|
|
memory {
|
|
/* memory >= 0x37e00000 is reserved for firmware usage */
|
|
reg = <0x80000000 0x37e00000>;
|
|
};
|
|
|
|
host1x@50000000 {
|
|
dsi@54300000 {
|
|
status = "okay";
|
|
|
|
vdd-supply = <&vdd_1v2_ap>;
|
|
|
|
panel@0 {
|
|
compatible = "lg,ld070wx3-sl01";
|
|
reg = <0>;
|
|
|
|
power-supply = <&vdd_lcd>;
|
|
backlight = <&backlight>;
|
|
};
|
|
};
|
|
};
|
|
|
|
serial@70006300 {
|
|
status = "okay";
|
|
};
|
|
|
|
pwm@7000a000 {
|
|
status = "okay";
|
|
};
|
|
|
|
i2c@7000d000 {
|
|
status = "okay";
|
|
clock-frequency = <400000>;
|
|
|
|
palmas: pmic@58 {
|
|
compatible = "ti,palmas";
|
|
reg = <0x58>;
|
|
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
|
|
|
|
#interrupt-cells = <2>;
|
|
interrupt-controller;
|
|
|
|
ti,system-power-controller;
|
|
|
|
palmas_gpio: gpio {
|
|
compatible = "ti,palmas-gpio";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
pmic {
|
|
compatible = "ti,tps65913-pmic", "ti,palmas-pmic";
|
|
|
|
ldoln-in-supply = <&vdd_smps10_out2>;
|
|
|
|
regulators {
|
|
smps123 {
|
|
regulator-name = "vd-cpu";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
smps45 {
|
|
regulator-name = "vd-soc";
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
smps6 {
|
|
regulator-name = "va-lcd-hv";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
smps7 {
|
|
regulator-name = "vd-ddr";
|
|
regulator-min-microvolt = <1350000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vdd_1v8: smps8 {
|
|
regulator-name = "vs-pmu-1v8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vdd_2v9_sys: smps9 {
|
|
regulator-name = "vs-sys-2v9";
|
|
regulator-min-microvolt = <2900000>;
|
|
regulator-max-microvolt = <2900000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vdd_smps10_out1: smps10_out1 {
|
|
regulator-name = "vd-smps10-out1";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vdd_smps10_out2: smps10_out2 {
|
|
regulator-name = "vd-smps10-out2";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldo1 {
|
|
regulator-name = "va-pllx";
|
|
regulator-min-microvolt = <1050000>;
|
|
regulator-max-microvolt = <1050000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vdd_1v2_ap: ldo2 {
|
|
regulator-name = "va-ap-1v2";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldo3 {
|
|
regulator-name = "vd-fuse";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldo4 {
|
|
regulator-name = "vd-ts-hv";
|
|
regulator-min-microvolt = <3200000>;
|
|
regulator-max-microvolt = <3200000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldo5 {
|
|
regulator-name = "va-cam2-hv";
|
|
regulator-min-microvolt = <2700000>;
|
|
regulator-max-microvolt = <2700000>;
|
|
};
|
|
|
|
ldo6 {
|
|
regulator-name = "va-sns-hv";
|
|
regulator-min-microvolt = <2850000>;
|
|
regulator-max-microvolt = <2850000>;
|
|
};
|
|
|
|
ldo7 {
|
|
regulator-name = "va-cam1-hv";
|
|
regulator-min-microvolt = <2700000>;
|
|
regulator-max-microvolt = <2700000>;
|
|
};
|
|
|
|
ldo8 {
|
|
regulator-name = "va-ap-rtc";
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
ti,enable-ldo8-tracking;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldo9 {
|
|
regulator-name = "vi-sdcard";
|
|
regulator-min-microvolt = <2900000>;
|
|
regulator-max-microvolt = <2900000>;
|
|
};
|
|
|
|
ldousb {
|
|
regulator-name = "avdd-usb";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldoln {
|
|
regulator-name = "va-hdmi";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
rtc {
|
|
compatible = "ti,palmas-rtc";
|
|
interrupt-parent = <&palmas>;
|
|
interrupts = <8 0>;
|
|
};
|
|
|
|
};
|
|
};
|
|
|
|
pmc@7000e400 {
|
|
nvidia,invert-interrupt;
|
|
};
|
|
|
|
/* eMMC */
|
|
sdhci@78000600 {
|
|
status = "okay";
|
|
bus-width = <8>;
|
|
non-removable;
|
|
};
|
|
|
|
usb@7d000000 {
|
|
status = "okay";
|
|
};
|
|
|
|
usb-phy@7d000000 {
|
|
status = "okay";
|
|
nvidia,xcvr-setup = <7>;
|
|
nvidia,xcvr-lsfslew = <2>;
|
|
nvidia,xcvr-lsrslew = <2>;
|
|
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
|
|
/* Should be changed to "otg" once we have vbus_supply */
|
|
/* As of now, USB devices need to be powered externally */
|
|
dr_mode = "host";
|
|
};
|
|
|
|
backlight: backlight {
|
|
compatible = "pwm-backlight";
|
|
pwms = <&pwm 1 40000>;
|
|
|
|
brightness-levels = <0 4 8 16 32 64 128 255>;
|
|
default-brightness-level = <6>;
|
|
|
|
power-supply = <&lcd_bl_en>;
|
|
};
|
|
|
|
clocks {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
clk32k_in: clock@0 {
|
|
compatible = "fixed-clock";
|
|
reg = <0>;
|
|
#clock-cells = <0>;
|
|
clock-frequency = <32768>;
|
|
};
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
|
|
power {
|
|
label = "Power";
|
|
gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_POWER>;
|
|
wakeup-source;
|
|
};
|
|
|
|
volume_down {
|
|
label = "Volume Down";
|
|
gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_VOLUMEDOWN>;
|
|
};
|
|
|
|
volume_up {
|
|
label = "Volume Up";
|
|
gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_VOLUMEUP>;
|
|
};
|
|
};
|
|
|
|
regulators {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
/* FIXME: output of BQ24192 */
|
|
vs_sys: regulator@0 {
|
|
compatible = "regulator-fixed";
|
|
reg = <0>;
|
|
regulator-name = "VS_SYS";
|
|
regulator-min-microvolt = <4200000>;
|
|
regulator-max-microvolt = <4200000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
lcd_bl_en: regulator@1 {
|
|
compatible = "regulator-fixed";
|
|
reg = <1>;
|
|
regulator-name = "VDD_LCD_BL";
|
|
regulator-min-microvolt = <16500000>;
|
|
regulator-max-microvolt = <16500000>;
|
|
gpio = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
vin-supply = <&vs_sys>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vdd_lcd: regulator@2 {
|
|
compatible = "regulator-fixed";
|
|
reg = <2>;
|
|
regulator-name = "VD_LCD_1V8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
gpio = <&palmas_gpio 4 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
vin-supply = <&vdd_1v8>;
|
|
regulator-boot-on;
|
|
};
|
|
};
|
|
};
|