AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-01 04:46:42 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
d1be2e485b
linux_dsm_epyc7002/arch/mips/include/asm/stackframe.h
David Daney 2a219b0eaa MIPS: Cavium OCTEON multiplier state preservation. 
For OCTEON, implement a save and restore of the multiplier state
across context switches.

Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11 09:57:24 +00:00

592 lines
13 KiB
C
Raw Blame History

/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1994, 95, 96, 99, 2001 Ralf Baechle
* Copyright (C) 1994, 1995, 1996 Paul M. Antoine.
* Copyright (C) 1999 Silicon Graphics, Inc.
* Copyright (C) 2007 Maciej W. Rozycki
*/
#ifndef _ASM_STACKFRAME_H
#define _ASM_STACKFRAME_H
#include <linux/threads.h>
#include <asm/asm.h>
#include <asm/asmmacro.h>
#include <asm/mipsregs.h>
#include <asm/asm-offsets.h>
/*
* For SMTC kernel, global IE should be left set, and interrupts
* controlled exclusively via IXMT.
*/
#ifdef CONFIG_MIPS_MT_SMTC
#define STATMASK 0x1e
#elif defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
#define STATMASK 0x3f
#else
#define STATMASK 0x1f
#endif
#ifdef CONFIG_MIPS_MT_SMTC
#include <asm/mipsmtregs.h>
#endif /* CONFIG_MIPS_MT_SMTC */
.macro SAVE_AT
.set push
.set noat
LONG_S $1, PT_R1(sp)
.set pop
.endm
.macro SAVE_TEMP
#ifdef CONFIG_CPU_HAS_SMARTMIPS
mflhxu v1
LONG_S v1, PT_LO(sp)
mflhxu v1
LONG_S v1, PT_HI(sp)
mflhxu v1
LONG_S v1, PT_ACX(sp)
#else
mfhi v1
LONG_S v1, PT_HI(sp)
mflo v1
LONG_S v1, PT_LO(sp)
#endif
#ifdef CONFIG_32BIT
LONG_S $8, PT_R8(sp)
LONG_S $9, PT_R9(sp)
#endif
LONG_S $10, PT_R10(sp)
LONG_S $11, PT_R11(sp)
LONG_S $12, PT_R12(sp)
LONG_S $13, PT_R13(sp)
LONG_S $14, PT_R14(sp)
LONG_S $15, PT_R15(sp)
LONG_S $24, PT_R24(sp)
.endm
.macro SAVE_STATIC
LONG_S $16, PT_R16(sp)
LONG_S $17, PT_R17(sp)
LONG_S $18, PT_R18(sp)
LONG_S $19, PT_R19(sp)
LONG_S $20, PT_R20(sp)
LONG_S $21, PT_R21(sp)
LONG_S $22, PT_R22(sp)
LONG_S $23, PT_R23(sp)
LONG_S $30, PT_R30(sp)
.endm
#ifdef CONFIG_SMP
#ifdef CONFIG_MIPS_MT_SMTC
#define PTEBASE_SHIFT 19 /* TCBIND */
#else
#define PTEBASE_SHIFT 23 /* CONTEXT */
#endif
.macro get_saved_sp /* SMP variation */
#ifdef CONFIG_MIPS_MT_SMTC
mfc0 k0, CP0_TCBIND
#else
MFC0 k0, CP0_CONTEXT
#endif
#if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32)
lui k1, %hi(kernelsp)
#else
lui k1, %highest(kernelsp)
daddiu k1, %higher(kernelsp)
dsll k1, 16
daddiu k1, %hi(kernelsp)
dsll k1, 16
#endif
LONG_SRL k0, PTEBASE_SHIFT
LONG_ADDU k1, k0
LONG_L k1, %lo(kernelsp)(k1)
.endm
.macro set_saved_sp stackp temp temp2
#ifdef CONFIG_MIPS_MT_SMTC
mfc0 \temp, CP0_TCBIND
#else
MFC0 \temp, CP0_CONTEXT
#endif
LONG_SRL \temp, PTEBASE_SHIFT
LONG_S \stackp, kernelsp(\temp)
.endm
#else
.macro get_saved_sp /* Uniprocessor variation */
#if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32)
lui k1, %hi(kernelsp)
#else
lui k1, %highest(kernelsp)
daddiu k1, %higher(kernelsp)
dsll k1, k1, 16
daddiu k1, %hi(kernelsp)
dsll k1, k1, 16
#endif
LONG_L k1, %lo(kernelsp)(k1)
.endm
.macro set_saved_sp stackp temp temp2
LONG_S \stackp, kernelsp
.endm
#endif
.macro SAVE_SOME
.set push
.set noat
.set reorder
mfc0 k0, CP0_STATUS
sll k0, 3 /* extract cu0 bit */
.set noreorder
bltz k0, 8f
move k1, sp
.set reorder
/* Called from user mode, new stack. */
get_saved_sp
#ifndef CONFIG_CPU_DADDI_WORKAROUNDS
8: move k0, sp
PTR_SUBU sp, k1, PT_SIZE
#else
.set at=k0
8: PTR_SUBU k1, PT_SIZE
.set noat
move k0, sp
move sp, k1
#endif
LONG_S k0, PT_R29(sp)
LONG_S $3, PT_R3(sp)
/*
* You might think that you don't need to save $0,
* but the FPU emulator and gdb remote debug stub
* need it to operate correctly
*/
LONG_S $0, PT_R0(sp)
mfc0 v1, CP0_STATUS
LONG_S $2, PT_R2(sp)
LONG_S v1, PT_STATUS(sp)
#ifdef CONFIG_MIPS_MT_SMTC
/*
* Ideally, these instructions would be shuffled in
* to cover the pipeline delay.
*/
.set mips32
mfc0 v1, CP0_TCSTATUS
.set mips0
LONG_S v1, PT_TCSTATUS(sp)
#endif /* CONFIG_MIPS_MT_SMTC */
LONG_S $4, PT_R4(sp)
mfc0 v1, CP0_CAUSE
LONG_S $5, PT_R5(sp)
LONG_S v1, PT_CAUSE(sp)
LONG_S $6, PT_R6(sp)
MFC0 v1, CP0_EPC
LONG_S $7, PT_R7(sp)
#ifdef CONFIG_64BIT
LONG_S $8, PT_R8(sp)
LONG_S $9, PT_R9(sp)
#endif
LONG_S v1, PT_EPC(sp)
LONG_S $25, PT_R25(sp)
LONG_S $28, PT_R28(sp)
LONG_S $31, PT_R31(sp)
ori $28, sp, _THREAD_MASK
xori $28, _THREAD_MASK
#ifdef CONFIG_CPU_CAVIUM_OCTEON
.set mips64
pref 0, 0($28) /* Prefetch the current pointer */
pref 0, PT_R31(sp) /* Prefetch the $31(ra) */
/* The Octeon multiplier state is affected by general multiply
instructions. It must be saved before and kernel code might
corrupt it */
jal octeon_mult_save
LONG_L v1, 0($28) /* Load the current pointer */
/* Restore $31(ra) that was changed by the jal */
LONG_L ra, PT_R31(sp)
pref 0, 0(v1) /* Prefetch the current thread */
#endif
.set pop
.endm
.macro SAVE_ALL
SAVE_SOME
SAVE_AT
SAVE_TEMP
SAVE_STATIC
.endm
.macro RESTORE_AT
.set push
.set noat
LONG_L $1, PT_R1(sp)
.set pop
.endm
.macro RESTORE_TEMP
#ifdef CONFIG_CPU_HAS_SMARTMIPS
LONG_L $24, PT_ACX(sp)
mtlhx $24
LONG_L $24, PT_HI(sp)
mtlhx $24
LONG_L $24, PT_LO(sp)
mtlhx $24
#else
LONG_L $24, PT_LO(sp)
mtlo $24
LONG_L $24, PT_HI(sp)
mthi $24
#endif
#ifdef CONFIG_32BIT
LONG_L $8, PT_R8(sp)
LONG_L $9, PT_R9(sp)
#endif
LONG_L $10, PT_R10(sp)
LONG_L $11, PT_R11(sp)
LONG_L $12, PT_R12(sp)
LONG_L $13, PT_R13(sp)
LONG_L $14, PT_R14(sp)
LONG_L $15, PT_R15(sp)
LONG_L $24, PT_R24(sp)
.endm
.macro RESTORE_STATIC
LONG_L $16, PT_R16(sp)
LONG_L $17, PT_R17(sp)
LONG_L $18, PT_R18(sp)
LONG_L $19, PT_R19(sp)
LONG_L $20, PT_R20(sp)
LONG_L $21, PT_R21(sp)
LONG_L $22, PT_R22(sp)
LONG_L $23, PT_R23(sp)
LONG_L $30, PT_R30(sp)
.endm
#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
.macro RESTORE_SOME
.set push
.set reorder
.set noat
mfc0 a0, CP0_STATUS
li v1, 0xff00
ori a0, STATMASK
xori a0, STATMASK
mtc0 a0, CP0_STATUS
and a0, v1
LONG_L v0, PT_STATUS(sp)
nor v1, $0, v1
and v0, v1
or v0, a0
mtc0 v0, CP0_STATUS
LONG_L $31, PT_R31(sp)
LONG_L $28, PT_R28(sp)
LONG_L $25, PT_R25(sp)
LONG_L $7, PT_R7(sp)
LONG_L $6, PT_R6(sp)
LONG_L $5, PT_R5(sp)
LONG_L $4, PT_R4(sp)
LONG_L $3, PT_R3(sp)
LONG_L $2, PT_R2(sp)
.set pop
.endm
.macro RESTORE_SP_AND_RET
.set push
.set noreorder
LONG_L k0, PT_EPC(sp)
LONG_L sp, PT_R29(sp)
jr k0
rfe
.set pop
.endm
#else
.macro RESTORE_SOME
.set push
.set reorder
.set noat
#ifdef CONFIG_MIPS_MT_SMTC
.set mips32r2
/*
* We need to make sure the read-modify-write
* of Status below isn't perturbed by an interrupt
* or cross-TC access, so we need to do at least a DMT,
* protected by an interrupt-inhibit. But setting IXMT
* also creates a few-cycle window where an IPI could
* be queued and not be detected before potentially
* returning to a WAIT or user-mode loop. It must be
* replayed.
*
* We're in the middle of a context switch, and
* we can't dispatch it directly without trashing
* some registers, so we'll try to detect this unlikely
* case and program a software interrupt in the VPE,
* as would be done for a cross-VPE IPI. To accomodate
* the handling of that case, we're doing a DVPE instead
* of just a DMT here to protect against other threads.
* This is a lot of cruft to cover a tiny window.
* If you can find a better design, implement it!
*
*/
mfc0 v0, CP0_TCSTATUS
ori v0, TCSTATUS_IXMT
mtc0 v0, CP0_TCSTATUS
_ehb
DVPE 5 # dvpe a1
jal mips_ihb
#endif /* CONFIG_MIPS_MT_SMTC */
#ifdef CONFIG_CPU_CAVIUM_OCTEON
/* Restore the Octeon multiplier state */
jal octeon_mult_restore
#endif
mfc0 a0, CP0_STATUS
ori a0, STATMASK
xori a0, STATMASK
mtc0 a0, CP0_STATUS
li v1, 0xff00
and a0, v1
LONG_L v0, PT_STATUS(sp)
nor v1, $0, v1
and v0, v1
or v0, a0
mtc0 v0, CP0_STATUS
#ifdef CONFIG_MIPS_MT_SMTC
/*
* Only after EXL/ERL have been restored to status can we
* restore TCStatus.IXMT.
*/
LONG_L v1, PT_TCSTATUS(sp)
_ehb
mfc0 a0, CP0_TCSTATUS
andi v1, TCSTATUS_IXMT
bnez v1, 0f
/*
* We'd like to detect any IPIs queued in the tiny window
* above and request an software interrupt to service them
* when we ERET.
*
* Computing the offset into the IPIQ array of the executing
* TC's IPI queue in-line would be tedious. We use part of
* the TCContext register to hold 16 bits of offset that we
* can add in-line to find the queue head.
*/
mfc0 v0, CP0_TCCONTEXT
la a2, IPIQ
srl v0, v0, 16
addu a2, a2, v0
LONG_L v0, 0(a2)
beqz v0, 0f
/*
* If we have a queue, provoke dispatch within the VPE by setting C_SW1
*/
mfc0 v0, CP0_CAUSE
ori v0, v0, C_SW1
mtc0 v0, CP0_CAUSE
0:
/*
* This test should really never branch but
* let's be prudent here. Having atomized
* the shared register modifications, we can
* now EVPE, and must do so before interrupts
* are potentially re-enabled.
*/
andi a1, a1, MVPCONTROL_EVP
beqz a1, 1f
evpe
1:
/* We know that TCStatua.IXMT should be set from above */
xori a0, a0, TCSTATUS_IXMT
or a0, a0, v1
mtc0 a0, CP0_TCSTATUS
_ehb
.set mips0
#endif /* CONFIG_MIPS_MT_SMTC */
LONG_L v1, PT_EPC(sp)
MTC0 v1, CP0_EPC
LONG_L $31, PT_R31(sp)
LONG_L $28, PT_R28(sp)
LONG_L $25, PT_R25(sp)
#ifdef CONFIG_64BIT
LONG_L $8, PT_R8(sp)
LONG_L $9, PT_R9(sp)
#endif
LONG_L $7, PT_R7(sp)
LONG_L $6, PT_R6(sp)
LONG_L $5, PT_R5(sp)
LONG_L $4, PT_R4(sp)
LONG_L $3, PT_R3(sp)
LONG_L $2, PT_R2(sp)
.set pop
.endm
.macro RESTORE_SP_AND_RET
LONG_L sp, PT_R29(sp)
.set mips3
eret
.set mips0
.endm
#endif
.macro RESTORE_SP
LONG_L sp, PT_R29(sp)
.endm
.macro RESTORE_ALL
RESTORE_TEMP
RESTORE_STATIC
RESTORE_AT
RESTORE_SOME
RESTORE_SP
.endm
.macro RESTORE_ALL_AND_RET
RESTORE_TEMP
RESTORE_STATIC
RESTORE_AT
RESTORE_SOME
RESTORE_SP_AND_RET
.endm
/*
* Move to kernel mode and disable interrupts.
* Set cp0 enable bit as sign that we're running on the kernel stack
*/
.macro CLI
#if !defined(CONFIG_MIPS_MT_SMTC)
mfc0 t0, CP0_STATUS
li t1, ST0_CU0 | STATMASK
or t0, t1
xori t0, STATMASK
mtc0 t0, CP0_STATUS
#else /* CONFIG_MIPS_MT_SMTC */
/*
* For SMTC, we need to set privilege
* and disable interrupts only for the
* current TC, using the TCStatus register.
*/
mfc0 t0, CP0_TCSTATUS
/* Fortunately CU 0 is in the same place in both registers */
/* Set TCU0, TMX, TKSU (for later inversion) and IXMT */
li t1, ST0_CU0 | 0x08001c00
or t0, t1
/* Clear TKSU, leave IXMT */
xori t0, 0x00001800
mtc0 t0, CP0_TCSTATUS
_ehb
/* We need to leave the global IE bit set, but clear EXL...*/
mfc0 t0, CP0_STATUS
ori t0, ST0_EXL | ST0_ERL
xori t0, ST0_EXL | ST0_ERL
mtc0 t0, CP0_STATUS
#endif /* CONFIG_MIPS_MT_SMTC */
irq_disable_hazard
.endm
/*
* Move to kernel mode and enable interrupts.
* Set cp0 enable bit as sign that we're running on the kernel stack
*/
.macro STI
#if !defined(CONFIG_MIPS_MT_SMTC)
mfc0 t0, CP0_STATUS
li t1, ST0_CU0 | STATMASK
or t0, t1
xori t0, STATMASK & ~1
mtc0 t0, CP0_STATUS
#else /* CONFIG_MIPS_MT_SMTC */
/*
* For SMTC, we need to set privilege
* and enable interrupts only for the
* current TC, using the TCStatus register.
*/
_ehb
mfc0 t0, CP0_TCSTATUS
/* Fortunately CU 0 is in the same place in both registers */
/* Set TCU0, TKSU (for later inversion) and IXMT */
li t1, ST0_CU0 | 0x08001c00
or t0, t1
/* Clear TKSU *and* IXMT */
xori t0, 0x00001c00
mtc0 t0, CP0_TCSTATUS
_ehb
/* We need to leave the global IE bit set, but clear EXL...*/
mfc0 t0, CP0_STATUS
ori t0, ST0_EXL
xori t0, ST0_EXL
mtc0 t0, CP0_STATUS
/* irq_enable_hazard below should expand to EHB for 24K/34K cpus */
#endif /* CONFIG_MIPS_MT_SMTC */
irq_enable_hazard
.endm
/*
* Just move to kernel mode and leave interrupts as they are. Note
* for the R3000 this means copying the previous enable from IEp.
* Set cp0 enable bit as sign that we're running on the kernel stack
*/
.macro KMODE
#ifdef CONFIG_MIPS_MT_SMTC
/*
* This gets baroque in SMTC. We want to
* protect the non-atomic clearing of EXL
* with DMT/EMT, but we don't want to take
* an interrupt while DMT is still in effect.
*/
/* KMODE gets invoked from both reorder and noreorder code */
.set push
.set mips32r2
.set noreorder
mfc0 v0, CP0_TCSTATUS
andi v1, v0, TCSTATUS_IXMT
ori v0, TCSTATUS_IXMT
mtc0 v0, CP0_TCSTATUS
_ehb
DMT 2 # dmt v0
/*
* We don't know a priori if ra is "live"
*/
move t0, ra
jal mips_ihb
nop /* delay slot */
move ra, t0
#endif /* CONFIG_MIPS_MT_SMTC */
mfc0 t0, CP0_STATUS
li t1, ST0_CU0 | (STATMASK & ~1)
#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
andi t2, t0, ST0_IEP
srl t2, 2
or t0, t2
#endif
or t0, t1
xori t0, STATMASK & ~1
mtc0 t0, CP0_STATUS
#ifdef CONFIG_MIPS_MT_SMTC
_ehb
andi v0, v0, VPECONTROL_TE
beqz v0, 2f
nop /* delay slot */
emt
2:
mfc0 v0, CP0_TCSTATUS
/* Clear IXMT, then OR in previous value */
ori v0, TCSTATUS_IXMT
xori v0, TCSTATUS_IXMT
or v0, v1, v0
mtc0 v0, CP0_TCSTATUS
/*
* irq_disable_hazard below should expand to EHB
* on 24K/34K CPUS
*/
.set pop
#endif /* CONFIG_MIPS_MT_SMTC */
irq_disable_hazard
.endm
#endif /* _ASM_STACKFRAME_H */
Reference in New Issue View Git Blame Copy Permalink