Erwan Le Ray d0a6a7bcc3 serial: stm32: add support of RX FIFO threshold ... Adds the support of RX FIFO threshold in order to improve the RX FIFO management. This is done by enabling fifo threshold interrupt, instead of relying on rx empty/fifo not full irq. That basically generates one irq/char currently. With this patch: - RXCFG is set to half fifo size (e.g. 16/2 = 8 data for a 16 data depth FIFO) - irq rate may be reduced by up to 1/RXCFG, e.g. 1 over 8 with current RXCFG setting. - Receiver timeout is used to gather chars when FIFO threshold isn't reached. Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>		2019-06-21 11:17:36 +02:00
..
8250	Revert "serial: 8250: Don't service RX FIFO if interrupts are disabled"	2019-06-21 11:07:34 +02:00
cpm_uart	tty: cpm_uart: drop unused iflag macro	2019-05-24 10:09:16 +02:00
jsm	tty: add SPDX identifiers to Kconfig and Makefiles	2019-04-04 18:48:43 +02:00
21285.c
altera_jtaguart.c
altera_uart.c
amba-pl010.c
amba-pl011.c	tty: amba-pl011: allow shared interrupt	2019-05-21 12:12:03 +02:00
amba-pl011.h
apbuart.c
apbuart.h
ar933x_uart.c	serial: ar933x_uart: Fix build failure with disabled console	2019-03-19 15:37:44 +01:00
arc_uart.c
atmel_serial.c	tty/serial: atmel: RS485 HD w/DMA: enable RX after TX is stopped	2019-03-28 00:27:48 +09:00
atmel_serial.h	tty/serial: atmel: add ISO7816 support	2018-10-02 13:38:55 -07:00
bcm63xx_uart.c
clps711x.c	serial: clps711x: Remove board support	2019-01-08 16:55:18 +01:00
digicolor-usart.c	tty/serial: digicolor: Fix digicolor-usart already registered warning	2019-06-10 19:08:31 +02:00
dz.c
dz.h
earlycon-arm-semihost.c
earlycon-riscv-sbi.c	tty/serial: use uart_console_write in the RISC-V SBL early console	2019-01-23 15:41:50 -08:00
earlycon.c
efm32-uart.c
fsl_lpuart.c	serial: fsl_lpuart: Remove unneeded OOM error message	2019-06-18 09:34:28 +02:00
icom.c
icom.h
ifx6x60.c
ifx6x60.h
imx.c	serial: imx: fix locking in set_termios()	2019-06-18 09:30:44 +02:00
ioc3_serial.c
ioc4_serial.c
ip22zilog.c
ip22zilog.h
Kconfig	tty: serial: add driver for the SiFive UART	2019-04-29 16:30:59 +02:00
kgdb_nmi.c
kgdboc.c	Disable kgdboc failed by echo space to /sys/module/kgdboc/parameters/kgdboc	2019-03-28 00:27:48 +09:00
lantiq.c	serial: lantiq: Do not swap register read/writes	2019-01-08 16:53:36 +01:00
lpc32xx_hs.c	tty: serial: lpc32xx_hs: fix missing console boot messages	2019-01-18 11:23:00 +01:00
Makefile	tty: serial: add driver for the SiFive UART	2019-04-29 16:30:59 +02:00
max310x.c	Merge 5.2-rc3 into tty-next	2019-06-03 13:53:20 +02:00
max3100.c
mcf.c
men_z135_uart.c	drivers: Remove explicit invocations of mmiowb()	2019-04-08 12:01:02 +01:00
meson_uart.c	tty: serial: meson: if no alias specified use an available id	2019-01-18 11:22:22 +01:00
milbeaut_usio.c	serial: milbeaut_usio: Fix error handling in probe and remove	2019-04-29 16:20:24 +02:00
mpc52xx_uart.c
mps2-uart.c	serial: mps2-uart: Add parentheses around conditional in mps2_uart_shutdown	2019-01-31 19:34:10 +01:00
mpsc.c
msm_serial.c	tty: serial: msm_serial: avoid system lockup condition	2019-06-10 19:42:35 +02:00
mux.c
mvebu-uart.c	serial: mvebu-uart: Fix to avoid a potential NULL pointer dereference	2019-03-19 15:37:43 +01:00
mxs-auart.c	tty: mxs-auart: fix a potential NULL pointer dereference	2019-03-19 15:37:43 +01:00
netx-serial.c
omap-serial.c
owl-uart.c
pch_uart.c	PCI: Move Rohm Vendor ID to generic list	2019-02-01 17:24:52 -06:00
pic32_uart.c	serial: set suppress_bind_attrs flag only if builtin	2018-11-09 09:07:17 -08:00
pic32_uart.h
pmac_zilog.c	tty: Use of_node_name_{eq,prefix} for node name comparisons	2018-12-17 16:12:17 +01:00
pmac_zilog.h
pnx8xxx_uart.c
pxa.c	serial: pxa: Fix an error handling path in 'serial_pxa_probe()'	2018-06-28 21:07:54 +09:00
qcom_geni_serial.c	tty: serial: qcom_geni_serial: Initialize baud in qcom_geni_console_setup	2019-03-19 15:37:44 +01:00
rda-uart.c	tty: serial: Add RDA8810PL UART driver	2018-12-31 13:10:01 -08:00
rp2.c	treewide: devm_kzalloc() -> devm_kcalloc()	2018-06-12 16:19:22 -07:00
sa1100.c
samsung.c	tty: serial: samsung: Enable baud clock during initialisation	2019-02-19 13:42:08 +01:00
samsung.h
sb1250-duart.c
sc16is7xx.c	Merge 5.1-rc6 into tty-next	2019-04-21 23:20:08 +02:00
sccnxp.c	serial: sccnxp: Allow to use non-standard baud rates	2018-12-20 16:26:59 +01:00
serial_core.c	tty: serial_core: Set port active bit in uart_port_activate	2019-06-18 09:52:26 +02:00
serial_ks8695.c
serial_mctrl_gpio.c	serial: mctrl_gpio: Check if GPIO property exisits before requesting it	2019-06-21 10:18:43 +02:00
serial_mctrl_gpio.h
serial_txx9.c	drivers: Remove explicit invocations of mmiowb()	2019-04-08 12:01:02 +01:00
serial-tegra.c	serial: tegra: fix some spelling mistakes	2018-11-09 08:58:18 -08:00
sh-sci.c	serial: sh-sci: disable DMA for uart_console	2019-05-21 12:18:17 +02:00
sh-sci.h
sifive.c	tty: serial: add driver for the SiFive UART	2019-04-29 16:30:59 +02:00
sirfsoc_uart.c
sirfsoc_uart.h
sn_console.c	tty: fix up a few remaining files without SPDX identifiers	2019-04-04 18:48:43 +02:00
sprd_serial.c	serial: sprd: Fix a copy-paste err in sprd_request_dma()	2019-04-16 15:21:33 +02:00
st-asc.c
stm32-usart.c	serial: stm32: add support of RX FIFO threshold	2019-06-21 11:17:36 +02:00
stm32-usart.h	serial: stm32: add support of RX FIFO threshold	2019-06-21 11:17:36 +02:00
suncore.c	tty: Use of_node_name_{eq,prefix} for node name comparisons	2018-12-17 16:12:17 +01:00
sunhv.c
sunsab.c	treewide: kzalloc() -> kcalloc()	2018-06-12 16:19:22 -07:00
sunsab.h
sunsu.c	TTY/Serial driver patches for 4.21-rc1	2018-12-28 20:33:54 -08:00
sunzilog.c
sunzilog.h
tegra-tcu.c	serial: Add Tegra Combined UART driver	2019-01-30 09:31:31 +01:00
timbuart.c
timbuart.h
uartlite.c	serial-uartlite: fix null pointer dereference on pointer port	2018-11-27 09:08:15 +01:00
ucc_uart.c	docs: serial: convert docs to ReST and rename to *.rst	2019-04-25 11:37:42 +02:00
vr41xx_siu.c
vt8500_serial.c
xilinx_uartps.c	serial: uartps: Remove useless return from cdns_uart_poll_put_char	2019-06-18 09:34:28 +02:00
zs.c
zs.h