mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-20 12:30:11 +07:00
bc1b50309c
We were returning DUPLEX_UNKNOWN in get_link_ksettings() when the link was down. Unfortunately, this causes a problem when "ethtool -s autoneg on" is issued for a link which is down because the ethtool code first reads the settings and then reapplies them with only the changes provided on the command line. Which results in us diving into set_link_ksettings() with DUPLEX_UNKNOWN which is not DUPLEX_FULL, so set_link_ksettings() throws an -EINVAL error. do not return DUPLEX_UNKNOWN to fix the issue. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
1450 lines
39 KiB
C
1450 lines
39 KiB
C
/*
|
|
* Copyright (C) 2013-2015 Chelsio Communications. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms and conditions of the GNU General Public License,
|
|
* version 2, as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
* The full GNU General Public License is included in this distribution in
|
|
* the file called "COPYING".
|
|
*
|
|
*/
|
|
|
|
#include <linux/firmware.h>
|
|
#include <linux/mdio.h>
|
|
|
|
#include "cxgb4.h"
|
|
#include "t4_regs.h"
|
|
#include "t4fw_api.h"
|
|
#include "cxgb4_cudbg.h"
|
|
|
|
#define EEPROM_MAGIC 0x38E2F10C
|
|
|
|
static u32 get_msglevel(struct net_device *dev)
|
|
{
|
|
return netdev2adap(dev)->msg_enable;
|
|
}
|
|
|
|
static void set_msglevel(struct net_device *dev, u32 val)
|
|
{
|
|
netdev2adap(dev)->msg_enable = val;
|
|
}
|
|
|
|
static const char stats_strings[][ETH_GSTRING_LEN] = {
|
|
"tx_octets_ok ",
|
|
"tx_frames_ok ",
|
|
"tx_broadcast_frames ",
|
|
"tx_multicast_frames ",
|
|
"tx_unicast_frames ",
|
|
"tx_error_frames ",
|
|
|
|
"tx_frames_64 ",
|
|
"tx_frames_65_to_127 ",
|
|
"tx_frames_128_to_255 ",
|
|
"tx_frames_256_to_511 ",
|
|
"tx_frames_512_to_1023 ",
|
|
"tx_frames_1024_to_1518 ",
|
|
"tx_frames_1519_to_max ",
|
|
|
|
"tx_frames_dropped ",
|
|
"tx_pause_frames ",
|
|
"tx_ppp0_frames ",
|
|
"tx_ppp1_frames ",
|
|
"tx_ppp2_frames ",
|
|
"tx_ppp3_frames ",
|
|
"tx_ppp4_frames ",
|
|
"tx_ppp5_frames ",
|
|
"tx_ppp6_frames ",
|
|
"tx_ppp7_frames ",
|
|
|
|
"rx_octets_ok ",
|
|
"rx_frames_ok ",
|
|
"rx_broadcast_frames ",
|
|
"rx_multicast_frames ",
|
|
"rx_unicast_frames ",
|
|
|
|
"rx_frames_too_long ",
|
|
"rx_jabber_errors ",
|
|
"rx_fcs_errors ",
|
|
"rx_length_errors ",
|
|
"rx_symbol_errors ",
|
|
"rx_runt_frames ",
|
|
|
|
"rx_frames_64 ",
|
|
"rx_frames_65_to_127 ",
|
|
"rx_frames_128_to_255 ",
|
|
"rx_frames_256_to_511 ",
|
|
"rx_frames_512_to_1023 ",
|
|
"rx_frames_1024_to_1518 ",
|
|
"rx_frames_1519_to_max ",
|
|
|
|
"rx_pause_frames ",
|
|
"rx_ppp0_frames ",
|
|
"rx_ppp1_frames ",
|
|
"rx_ppp2_frames ",
|
|
"rx_ppp3_frames ",
|
|
"rx_ppp4_frames ",
|
|
"rx_ppp5_frames ",
|
|
"rx_ppp6_frames ",
|
|
"rx_ppp7_frames ",
|
|
|
|
"rx_bg0_frames_dropped ",
|
|
"rx_bg1_frames_dropped ",
|
|
"rx_bg2_frames_dropped ",
|
|
"rx_bg3_frames_dropped ",
|
|
"rx_bg0_frames_trunc ",
|
|
"rx_bg1_frames_trunc ",
|
|
"rx_bg2_frames_trunc ",
|
|
"rx_bg3_frames_trunc ",
|
|
|
|
"tso ",
|
|
"tx_csum_offload ",
|
|
"rx_csum_good ",
|
|
"vlan_extractions ",
|
|
"vlan_insertions ",
|
|
"gro_packets ",
|
|
"gro_merged ",
|
|
};
|
|
|
|
static char adapter_stats_strings[][ETH_GSTRING_LEN] = {
|
|
"db_drop ",
|
|
"db_full ",
|
|
"db_empty ",
|
|
"write_coal_success ",
|
|
"write_coal_fail ",
|
|
};
|
|
|
|
static char loopback_stats_strings[][ETH_GSTRING_LEN] = {
|
|
"-------Loopback----------- ",
|
|
"octets_ok ",
|
|
"frames_ok ",
|
|
"bcast_frames ",
|
|
"mcast_frames ",
|
|
"ucast_frames ",
|
|
"error_frames ",
|
|
"frames_64 ",
|
|
"frames_65_to_127 ",
|
|
"frames_128_to_255 ",
|
|
"frames_256_to_511 ",
|
|
"frames_512_to_1023 ",
|
|
"frames_1024_to_1518 ",
|
|
"frames_1519_to_max ",
|
|
"frames_dropped ",
|
|
"bg0_frames_dropped ",
|
|
"bg1_frames_dropped ",
|
|
"bg2_frames_dropped ",
|
|
"bg3_frames_dropped ",
|
|
"bg0_frames_trunc ",
|
|
"bg1_frames_trunc ",
|
|
"bg2_frames_trunc ",
|
|
"bg3_frames_trunc ",
|
|
};
|
|
|
|
static const char cxgb4_priv_flags_strings[][ETH_GSTRING_LEN] = {
|
|
[PRIV_FLAG_PORT_TX_VM_BIT] = "port_tx_vm_wr",
|
|
};
|
|
|
|
static int get_sset_count(struct net_device *dev, int sset)
|
|
{
|
|
switch (sset) {
|
|
case ETH_SS_STATS:
|
|
return ARRAY_SIZE(stats_strings) +
|
|
ARRAY_SIZE(adapter_stats_strings) +
|
|
ARRAY_SIZE(loopback_stats_strings);
|
|
case ETH_SS_PRIV_FLAGS:
|
|
return ARRAY_SIZE(cxgb4_priv_flags_strings);
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static int get_regs_len(struct net_device *dev)
|
|
{
|
|
struct adapter *adap = netdev2adap(dev);
|
|
|
|
return t4_get_regs_len(adap);
|
|
}
|
|
|
|
static int get_eeprom_len(struct net_device *dev)
|
|
{
|
|
return EEPROMSIZE;
|
|
}
|
|
|
|
static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
|
|
{
|
|
struct adapter *adapter = netdev2adap(dev);
|
|
u32 exprom_vers;
|
|
|
|
strlcpy(info->driver, cxgb4_driver_name, sizeof(info->driver));
|
|
strlcpy(info->version, cxgb4_driver_version,
|
|
sizeof(info->version));
|
|
strlcpy(info->bus_info, pci_name(adapter->pdev),
|
|
sizeof(info->bus_info));
|
|
info->regdump_len = get_regs_len(dev);
|
|
|
|
if (!adapter->params.fw_vers)
|
|
strcpy(info->fw_version, "N/A");
|
|
else
|
|
snprintf(info->fw_version, sizeof(info->fw_version),
|
|
"%u.%u.%u.%u, TP %u.%u.%u.%u",
|
|
FW_HDR_FW_VER_MAJOR_G(adapter->params.fw_vers),
|
|
FW_HDR_FW_VER_MINOR_G(adapter->params.fw_vers),
|
|
FW_HDR_FW_VER_MICRO_G(adapter->params.fw_vers),
|
|
FW_HDR_FW_VER_BUILD_G(adapter->params.fw_vers),
|
|
FW_HDR_FW_VER_MAJOR_G(adapter->params.tp_vers),
|
|
FW_HDR_FW_VER_MINOR_G(adapter->params.tp_vers),
|
|
FW_HDR_FW_VER_MICRO_G(adapter->params.tp_vers),
|
|
FW_HDR_FW_VER_BUILD_G(adapter->params.tp_vers));
|
|
|
|
if (!t4_get_exprom_version(adapter, &exprom_vers))
|
|
snprintf(info->erom_version, sizeof(info->erom_version),
|
|
"%u.%u.%u.%u",
|
|
FW_HDR_FW_VER_MAJOR_G(exprom_vers),
|
|
FW_HDR_FW_VER_MINOR_G(exprom_vers),
|
|
FW_HDR_FW_VER_MICRO_G(exprom_vers),
|
|
FW_HDR_FW_VER_BUILD_G(exprom_vers));
|
|
info->n_priv_flags = ARRAY_SIZE(cxgb4_priv_flags_strings);
|
|
}
|
|
|
|
static void get_strings(struct net_device *dev, u32 stringset, u8 *data)
|
|
{
|
|
if (stringset == ETH_SS_STATS) {
|
|
memcpy(data, stats_strings, sizeof(stats_strings));
|
|
data += sizeof(stats_strings);
|
|
memcpy(data, adapter_stats_strings,
|
|
sizeof(adapter_stats_strings));
|
|
data += sizeof(adapter_stats_strings);
|
|
memcpy(data, loopback_stats_strings,
|
|
sizeof(loopback_stats_strings));
|
|
} else if (stringset == ETH_SS_PRIV_FLAGS) {
|
|
memcpy(data, cxgb4_priv_flags_strings,
|
|
sizeof(cxgb4_priv_flags_strings));
|
|
}
|
|
}
|
|
|
|
/* port stats maintained per queue of the port. They should be in the same
|
|
* order as in stats_strings above.
|
|
*/
|
|
struct queue_port_stats {
|
|
u64 tso;
|
|
u64 tx_csum;
|
|
u64 rx_csum;
|
|
u64 vlan_ex;
|
|
u64 vlan_ins;
|
|
u64 gro_pkts;
|
|
u64 gro_merged;
|
|
};
|
|
|
|
struct adapter_stats {
|
|
u64 db_drop;
|
|
u64 db_full;
|
|
u64 db_empty;
|
|
u64 wc_success;
|
|
u64 wc_fail;
|
|
};
|
|
|
|
static void collect_sge_port_stats(const struct adapter *adap,
|
|
const struct port_info *p,
|
|
struct queue_port_stats *s)
|
|
{
|
|
int i;
|
|
const struct sge_eth_txq *tx = &adap->sge.ethtxq[p->first_qset];
|
|
const struct sge_eth_rxq *rx = &adap->sge.ethrxq[p->first_qset];
|
|
|
|
memset(s, 0, sizeof(*s));
|
|
for (i = 0; i < p->nqsets; i++, rx++, tx++) {
|
|
s->tso += tx->tso;
|
|
s->tx_csum += tx->tx_cso;
|
|
s->rx_csum += rx->stats.rx_cso;
|
|
s->vlan_ex += rx->stats.vlan_ex;
|
|
s->vlan_ins += tx->vlan_ins;
|
|
s->gro_pkts += rx->stats.lro_pkts;
|
|
s->gro_merged += rx->stats.lro_merged;
|
|
}
|
|
}
|
|
|
|
static void collect_adapter_stats(struct adapter *adap, struct adapter_stats *s)
|
|
{
|
|
u64 val1, val2;
|
|
|
|
memset(s, 0, sizeof(*s));
|
|
|
|
s->db_drop = adap->db_stats.db_drop;
|
|
s->db_full = adap->db_stats.db_full;
|
|
s->db_empty = adap->db_stats.db_empty;
|
|
|
|
if (!is_t4(adap->params.chip)) {
|
|
int v;
|
|
|
|
v = t4_read_reg(adap, SGE_STAT_CFG_A);
|
|
if (STATSOURCE_T5_G(v) == 7) {
|
|
val2 = t4_read_reg(adap, SGE_STAT_MATCH_A);
|
|
val1 = t4_read_reg(adap, SGE_STAT_TOTAL_A);
|
|
s->wc_success = val1 - val2;
|
|
s->wc_fail = val2;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void get_stats(struct net_device *dev, struct ethtool_stats *stats,
|
|
u64 *data)
|
|
{
|
|
struct port_info *pi = netdev_priv(dev);
|
|
struct adapter *adapter = pi->adapter;
|
|
struct lb_port_stats s;
|
|
int i;
|
|
u64 *p0;
|
|
|
|
t4_get_port_stats_offset(adapter, pi->tx_chan,
|
|
(struct port_stats *)data,
|
|
&pi->stats_base);
|
|
|
|
data += sizeof(struct port_stats) / sizeof(u64);
|
|
collect_sge_port_stats(adapter, pi, (struct queue_port_stats *)data);
|
|
data += sizeof(struct queue_port_stats) / sizeof(u64);
|
|
collect_adapter_stats(adapter, (struct adapter_stats *)data);
|
|
data += sizeof(struct adapter_stats) / sizeof(u64);
|
|
|
|
*data++ = (u64)pi->port_id;
|
|
memset(&s, 0, sizeof(s));
|
|
t4_get_lb_stats(adapter, pi->port_id, &s);
|
|
|
|
p0 = &s.octets;
|
|
for (i = 0; i < ARRAY_SIZE(loopback_stats_strings) - 1; i++)
|
|
*data++ = (unsigned long long)*p0++;
|
|
}
|
|
|
|
static void get_regs(struct net_device *dev, struct ethtool_regs *regs,
|
|
void *buf)
|
|
{
|
|
struct adapter *adap = netdev2adap(dev);
|
|
size_t buf_size;
|
|
|
|
buf_size = t4_get_regs_len(adap);
|
|
regs->version = mk_adap_vers(adap);
|
|
t4_get_regs(adap, buf, buf_size);
|
|
}
|
|
|
|
static int restart_autoneg(struct net_device *dev)
|
|
{
|
|
struct port_info *p = netdev_priv(dev);
|
|
|
|
if (!netif_running(dev))
|
|
return -EAGAIN;
|
|
if (p->link_cfg.autoneg != AUTONEG_ENABLE)
|
|
return -EINVAL;
|
|
t4_restart_aneg(p->adapter, p->adapter->pf, p->tx_chan);
|
|
return 0;
|
|
}
|
|
|
|
static int identify_port(struct net_device *dev,
|
|
enum ethtool_phys_id_state state)
|
|
{
|
|
unsigned int val;
|
|
struct adapter *adap = netdev2adap(dev);
|
|
|
|
if (state == ETHTOOL_ID_ACTIVE)
|
|
val = 0xffff;
|
|
else if (state == ETHTOOL_ID_INACTIVE)
|
|
val = 0;
|
|
else
|
|
return -EINVAL;
|
|
|
|
return t4_identify_port(adap, adap->pf, netdev2pinfo(dev)->viid, val);
|
|
}
|
|
|
|
/**
|
|
* from_fw_port_mod_type - translate Firmware Port/Module type to Ethtool
|
|
* @port_type: Firmware Port Type
|
|
* @mod_type: Firmware Module Type
|
|
*
|
|
* Translate Firmware Port/Module type to Ethtool Port Type.
|
|
*/
|
|
static int from_fw_port_mod_type(enum fw_port_type port_type,
|
|
enum fw_port_module_type mod_type)
|
|
{
|
|
if (port_type == FW_PORT_TYPE_BT_SGMII ||
|
|
port_type == FW_PORT_TYPE_BT_XFI ||
|
|
port_type == FW_PORT_TYPE_BT_XAUI) {
|
|
return PORT_TP;
|
|
} else if (port_type == FW_PORT_TYPE_FIBER_XFI ||
|
|
port_type == FW_PORT_TYPE_FIBER_XAUI) {
|
|
return PORT_FIBRE;
|
|
} else if (port_type == FW_PORT_TYPE_SFP ||
|
|
port_type == FW_PORT_TYPE_QSFP_10G ||
|
|
port_type == FW_PORT_TYPE_QSA ||
|
|
port_type == FW_PORT_TYPE_QSFP ||
|
|
port_type == FW_PORT_TYPE_CR4_QSFP ||
|
|
port_type == FW_PORT_TYPE_CR_QSFP ||
|
|
port_type == FW_PORT_TYPE_CR2_QSFP ||
|
|
port_type == FW_PORT_TYPE_SFP28) {
|
|
if (mod_type == FW_PORT_MOD_TYPE_LR ||
|
|
mod_type == FW_PORT_MOD_TYPE_SR ||
|
|
mod_type == FW_PORT_MOD_TYPE_ER ||
|
|
mod_type == FW_PORT_MOD_TYPE_LRM)
|
|
return PORT_FIBRE;
|
|
else if (mod_type == FW_PORT_MOD_TYPE_TWINAX_PASSIVE ||
|
|
mod_type == FW_PORT_MOD_TYPE_TWINAX_ACTIVE)
|
|
return PORT_DA;
|
|
else
|
|
return PORT_OTHER;
|
|
} else if (port_type == FW_PORT_TYPE_KR4_100G ||
|
|
port_type == FW_PORT_TYPE_KR_SFP28 ||
|
|
port_type == FW_PORT_TYPE_KR_XLAUI) {
|
|
return PORT_NONE;
|
|
}
|
|
|
|
return PORT_OTHER;
|
|
}
|
|
|
|
/**
|
|
* speed_to_fw_caps - translate Port Speed to Firmware Port Capabilities
|
|
* @speed: speed in Kb/s
|
|
*
|
|
* Translates a specific Port Speed into a Firmware Port Capabilities
|
|
* value.
|
|
*/
|
|
static unsigned int speed_to_fw_caps(int speed)
|
|
{
|
|
if (speed == 100)
|
|
return FW_PORT_CAP32_SPEED_100M;
|
|
if (speed == 1000)
|
|
return FW_PORT_CAP32_SPEED_1G;
|
|
if (speed == 10000)
|
|
return FW_PORT_CAP32_SPEED_10G;
|
|
if (speed == 25000)
|
|
return FW_PORT_CAP32_SPEED_25G;
|
|
if (speed == 40000)
|
|
return FW_PORT_CAP32_SPEED_40G;
|
|
if (speed == 50000)
|
|
return FW_PORT_CAP32_SPEED_50G;
|
|
if (speed == 100000)
|
|
return FW_PORT_CAP32_SPEED_100G;
|
|
if (speed == 200000)
|
|
return FW_PORT_CAP32_SPEED_200G;
|
|
if (speed == 400000)
|
|
return FW_PORT_CAP32_SPEED_400G;
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* fw_caps_to_lmm - translate Firmware to ethtool Link Mode Mask
|
|
* @port_type: Firmware Port Type
|
|
* @fw_caps: Firmware Port Capabilities
|
|
* @link_mode_mask: ethtool Link Mode Mask
|
|
*
|
|
* Translate a Firmware Port Capabilities specification to an ethtool
|
|
* Link Mode Mask.
|
|
*/
|
|
static void fw_caps_to_lmm(enum fw_port_type port_type,
|
|
unsigned int fw_caps,
|
|
unsigned long *link_mode_mask)
|
|
{
|
|
#define SET_LMM(__lmm_name) \
|
|
__set_bit(ETHTOOL_LINK_MODE_ ## __lmm_name ## _BIT, \
|
|
link_mode_mask)
|
|
|
|
#define FW_CAPS_TO_LMM(__fw_name, __lmm_name) \
|
|
do { \
|
|
if (fw_caps & FW_PORT_CAP32_ ## __fw_name) \
|
|
SET_LMM(__lmm_name); \
|
|
} while (0)
|
|
|
|
switch (port_type) {
|
|
case FW_PORT_TYPE_BT_SGMII:
|
|
case FW_PORT_TYPE_BT_XFI:
|
|
case FW_PORT_TYPE_BT_XAUI:
|
|
SET_LMM(TP);
|
|
FW_CAPS_TO_LMM(SPEED_100M, 100baseT_Full);
|
|
FW_CAPS_TO_LMM(SPEED_1G, 1000baseT_Full);
|
|
FW_CAPS_TO_LMM(SPEED_10G, 10000baseT_Full);
|
|
break;
|
|
|
|
case FW_PORT_TYPE_KX4:
|
|
case FW_PORT_TYPE_KX:
|
|
SET_LMM(Backplane);
|
|
FW_CAPS_TO_LMM(SPEED_1G, 1000baseKX_Full);
|
|
FW_CAPS_TO_LMM(SPEED_10G, 10000baseKX4_Full);
|
|
break;
|
|
|
|
case FW_PORT_TYPE_KR:
|
|
SET_LMM(Backplane);
|
|
FW_CAPS_TO_LMM(SPEED_10G, 10000baseKR_Full);
|
|
break;
|
|
|
|
case FW_PORT_TYPE_BP_AP:
|
|
SET_LMM(Backplane);
|
|
FW_CAPS_TO_LMM(SPEED_1G, 1000baseKX_Full);
|
|
FW_CAPS_TO_LMM(SPEED_10G, 10000baseR_FEC);
|
|
FW_CAPS_TO_LMM(SPEED_10G, 10000baseKR_Full);
|
|
break;
|
|
|
|
case FW_PORT_TYPE_BP4_AP:
|
|
SET_LMM(Backplane);
|
|
FW_CAPS_TO_LMM(SPEED_1G, 1000baseKX_Full);
|
|
FW_CAPS_TO_LMM(SPEED_10G, 10000baseR_FEC);
|
|
FW_CAPS_TO_LMM(SPEED_10G, 10000baseKR_Full);
|
|
FW_CAPS_TO_LMM(SPEED_10G, 10000baseKX4_Full);
|
|
break;
|
|
|
|
case FW_PORT_TYPE_FIBER_XFI:
|
|
case FW_PORT_TYPE_FIBER_XAUI:
|
|
case FW_PORT_TYPE_SFP:
|
|
case FW_PORT_TYPE_QSFP_10G:
|
|
case FW_PORT_TYPE_QSA:
|
|
SET_LMM(FIBRE);
|
|
FW_CAPS_TO_LMM(SPEED_1G, 1000baseT_Full);
|
|
FW_CAPS_TO_LMM(SPEED_10G, 10000baseT_Full);
|
|
break;
|
|
|
|
case FW_PORT_TYPE_BP40_BA:
|
|
case FW_PORT_TYPE_QSFP:
|
|
SET_LMM(FIBRE);
|
|
FW_CAPS_TO_LMM(SPEED_1G, 1000baseT_Full);
|
|
FW_CAPS_TO_LMM(SPEED_10G, 10000baseT_Full);
|
|
FW_CAPS_TO_LMM(SPEED_40G, 40000baseSR4_Full);
|
|
break;
|
|
|
|
case FW_PORT_TYPE_CR_QSFP:
|
|
case FW_PORT_TYPE_SFP28:
|
|
SET_LMM(FIBRE);
|
|
FW_CAPS_TO_LMM(SPEED_1G, 1000baseT_Full);
|
|
FW_CAPS_TO_LMM(SPEED_10G, 10000baseT_Full);
|
|
FW_CAPS_TO_LMM(SPEED_25G, 25000baseCR_Full);
|
|
break;
|
|
|
|
case FW_PORT_TYPE_KR_SFP28:
|
|
SET_LMM(Backplane);
|
|
FW_CAPS_TO_LMM(SPEED_1G, 1000baseT_Full);
|
|
FW_CAPS_TO_LMM(SPEED_10G, 10000baseKR_Full);
|
|
FW_CAPS_TO_LMM(SPEED_25G, 25000baseKR_Full);
|
|
break;
|
|
|
|
case FW_PORT_TYPE_KR_XLAUI:
|
|
SET_LMM(Backplane);
|
|
FW_CAPS_TO_LMM(SPEED_1G, 1000baseKX_Full);
|
|
FW_CAPS_TO_LMM(SPEED_10G, 10000baseKR_Full);
|
|
FW_CAPS_TO_LMM(SPEED_40G, 40000baseKR4_Full);
|
|
break;
|
|
|
|
case FW_PORT_TYPE_CR2_QSFP:
|
|
SET_LMM(FIBRE);
|
|
FW_CAPS_TO_LMM(SPEED_50G, 50000baseSR2_Full);
|
|
break;
|
|
|
|
case FW_PORT_TYPE_KR4_100G:
|
|
case FW_PORT_TYPE_CR4_QSFP:
|
|
SET_LMM(FIBRE);
|
|
FW_CAPS_TO_LMM(SPEED_1G, 1000baseT_Full);
|
|
FW_CAPS_TO_LMM(SPEED_10G, 10000baseSR_Full);
|
|
FW_CAPS_TO_LMM(SPEED_40G, 40000baseSR4_Full);
|
|
FW_CAPS_TO_LMM(SPEED_25G, 25000baseCR_Full);
|
|
FW_CAPS_TO_LMM(SPEED_50G, 50000baseCR2_Full);
|
|
FW_CAPS_TO_LMM(SPEED_100G, 100000baseCR4_Full);
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
FW_CAPS_TO_LMM(ANEG, Autoneg);
|
|
FW_CAPS_TO_LMM(802_3_PAUSE, Pause);
|
|
FW_CAPS_TO_LMM(802_3_ASM_DIR, Asym_Pause);
|
|
|
|
#undef FW_CAPS_TO_LMM
|
|
#undef SET_LMM
|
|
}
|
|
|
|
/**
|
|
* lmm_to_fw_caps - translate ethtool Link Mode Mask to Firmware
|
|
* capabilities
|
|
* @et_lmm: ethtool Link Mode Mask
|
|
*
|
|
* Translate ethtool Link Mode Mask into a Firmware Port capabilities
|
|
* value.
|
|
*/
|
|
static unsigned int lmm_to_fw_caps(const unsigned long *link_mode_mask)
|
|
{
|
|
unsigned int fw_caps = 0;
|
|
|
|
#define LMM_TO_FW_CAPS(__lmm_name, __fw_name) \
|
|
do { \
|
|
if (test_bit(ETHTOOL_LINK_MODE_ ## __lmm_name ## _BIT, \
|
|
link_mode_mask)) \
|
|
fw_caps |= FW_PORT_CAP32_ ## __fw_name; \
|
|
} while (0)
|
|
|
|
LMM_TO_FW_CAPS(100baseT_Full, SPEED_100M);
|
|
LMM_TO_FW_CAPS(1000baseT_Full, SPEED_1G);
|
|
LMM_TO_FW_CAPS(10000baseT_Full, SPEED_10G);
|
|
LMM_TO_FW_CAPS(40000baseSR4_Full, SPEED_40G);
|
|
LMM_TO_FW_CAPS(25000baseCR_Full, SPEED_25G);
|
|
LMM_TO_FW_CAPS(50000baseCR2_Full, SPEED_50G);
|
|
LMM_TO_FW_CAPS(100000baseCR4_Full, SPEED_100G);
|
|
|
|
#undef LMM_TO_FW_CAPS
|
|
|
|
return fw_caps;
|
|
}
|
|
|
|
static int get_link_ksettings(struct net_device *dev,
|
|
struct ethtool_link_ksettings *link_ksettings)
|
|
{
|
|
struct port_info *pi = netdev_priv(dev);
|
|
struct ethtool_link_settings *base = &link_ksettings->base;
|
|
|
|
/* For the nonce, the Firmware doesn't send up Port State changes
|
|
* when the Virtual Interface attached to the Port is down. So
|
|
* if it's down, let's grab any changes.
|
|
*/
|
|
if (!netif_running(dev))
|
|
(void)t4_update_port_info(pi);
|
|
|
|
ethtool_link_ksettings_zero_link_mode(link_ksettings, supported);
|
|
ethtool_link_ksettings_zero_link_mode(link_ksettings, advertising);
|
|
ethtool_link_ksettings_zero_link_mode(link_ksettings, lp_advertising);
|
|
|
|
base->port = from_fw_port_mod_type(pi->port_type, pi->mod_type);
|
|
|
|
if (pi->mdio_addr >= 0) {
|
|
base->phy_address = pi->mdio_addr;
|
|
base->mdio_support = (pi->port_type == FW_PORT_TYPE_BT_SGMII
|
|
? ETH_MDIO_SUPPORTS_C22
|
|
: ETH_MDIO_SUPPORTS_C45);
|
|
} else {
|
|
base->phy_address = 255;
|
|
base->mdio_support = 0;
|
|
}
|
|
|
|
fw_caps_to_lmm(pi->port_type, pi->link_cfg.pcaps,
|
|
link_ksettings->link_modes.supported);
|
|
fw_caps_to_lmm(pi->port_type, pi->link_cfg.acaps,
|
|
link_ksettings->link_modes.advertising);
|
|
fw_caps_to_lmm(pi->port_type, pi->link_cfg.lpacaps,
|
|
link_ksettings->link_modes.lp_advertising);
|
|
|
|
base->speed = (netif_carrier_ok(dev)
|
|
? pi->link_cfg.speed
|
|
: SPEED_UNKNOWN);
|
|
base->duplex = DUPLEX_FULL;
|
|
|
|
if (pi->link_cfg.fc & PAUSE_RX) {
|
|
if (pi->link_cfg.fc & PAUSE_TX) {
|
|
ethtool_link_ksettings_add_link_mode(link_ksettings,
|
|
advertising,
|
|
Pause);
|
|
} else {
|
|
ethtool_link_ksettings_add_link_mode(link_ksettings,
|
|
advertising,
|
|
Asym_Pause);
|
|
}
|
|
} else if (pi->link_cfg.fc & PAUSE_TX) {
|
|
ethtool_link_ksettings_add_link_mode(link_ksettings,
|
|
advertising,
|
|
Asym_Pause);
|
|
}
|
|
|
|
base->autoneg = pi->link_cfg.autoneg;
|
|
if (pi->link_cfg.pcaps & FW_PORT_CAP32_ANEG)
|
|
ethtool_link_ksettings_add_link_mode(link_ksettings,
|
|
supported, Autoneg);
|
|
if (pi->link_cfg.autoneg)
|
|
ethtool_link_ksettings_add_link_mode(link_ksettings,
|
|
advertising, Autoneg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int set_link_ksettings(struct net_device *dev,
|
|
const struct ethtool_link_ksettings *link_ksettings)
|
|
{
|
|
struct port_info *pi = netdev_priv(dev);
|
|
struct link_config *lc = &pi->link_cfg;
|
|
const struct ethtool_link_settings *base = &link_ksettings->base;
|
|
struct link_config old_lc;
|
|
unsigned int fw_caps;
|
|
int ret = 0;
|
|
|
|
/* only full-duplex supported */
|
|
if (base->duplex != DUPLEX_FULL)
|
|
return -EINVAL;
|
|
|
|
old_lc = *lc;
|
|
if (!(lc->pcaps & FW_PORT_CAP32_ANEG) ||
|
|
base->autoneg == AUTONEG_DISABLE) {
|
|
fw_caps = speed_to_fw_caps(base->speed);
|
|
|
|
/* Must only specify a single speed which must be supported
|
|
* as part of the Physical Port Capabilities.
|
|
*/
|
|
if ((fw_caps & (fw_caps - 1)) != 0 ||
|
|
!(lc->pcaps & fw_caps))
|
|
return -EINVAL;
|
|
|
|
lc->speed_caps = fw_caps;
|
|
lc->acaps = fw_caps;
|
|
} else {
|
|
fw_caps =
|
|
lmm_to_fw_caps(link_ksettings->link_modes.advertising);
|
|
if (!(lc->pcaps & fw_caps))
|
|
return -EINVAL;
|
|
lc->speed_caps = 0;
|
|
lc->acaps = fw_caps | FW_PORT_CAP32_ANEG;
|
|
}
|
|
lc->autoneg = base->autoneg;
|
|
|
|
/* If the firmware rejects the Link Configuration request, back out
|
|
* the changes and report the error.
|
|
*/
|
|
ret = t4_link_l1cfg(pi->adapter, pi->adapter->mbox, pi->tx_chan, lc);
|
|
if (ret)
|
|
*lc = old_lc;
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Translate the Firmware FEC value into the ethtool value. */
|
|
static inline unsigned int fwcap_to_eth_fec(unsigned int fw_fec)
|
|
{
|
|
unsigned int eth_fec = 0;
|
|
|
|
if (fw_fec & FW_PORT_CAP32_FEC_RS)
|
|
eth_fec |= ETHTOOL_FEC_RS;
|
|
if (fw_fec & FW_PORT_CAP32_FEC_BASER_RS)
|
|
eth_fec |= ETHTOOL_FEC_BASER;
|
|
|
|
/* if nothing is set, then FEC is off */
|
|
if (!eth_fec)
|
|
eth_fec = ETHTOOL_FEC_OFF;
|
|
|
|
return eth_fec;
|
|
}
|
|
|
|
/* Translate Common Code FEC value into ethtool value. */
|
|
static inline unsigned int cc_to_eth_fec(unsigned int cc_fec)
|
|
{
|
|
unsigned int eth_fec = 0;
|
|
|
|
if (cc_fec & FEC_AUTO)
|
|
eth_fec |= ETHTOOL_FEC_AUTO;
|
|
if (cc_fec & FEC_RS)
|
|
eth_fec |= ETHTOOL_FEC_RS;
|
|
if (cc_fec & FEC_BASER_RS)
|
|
eth_fec |= ETHTOOL_FEC_BASER;
|
|
|
|
/* if nothing is set, then FEC is off */
|
|
if (!eth_fec)
|
|
eth_fec = ETHTOOL_FEC_OFF;
|
|
|
|
return eth_fec;
|
|
}
|
|
|
|
/* Translate ethtool FEC value into Common Code value. */
|
|
static inline unsigned int eth_to_cc_fec(unsigned int eth_fec)
|
|
{
|
|
unsigned int cc_fec = 0;
|
|
|
|
if (eth_fec & ETHTOOL_FEC_OFF)
|
|
return cc_fec;
|
|
|
|
if (eth_fec & ETHTOOL_FEC_AUTO)
|
|
cc_fec |= FEC_AUTO;
|
|
if (eth_fec & ETHTOOL_FEC_RS)
|
|
cc_fec |= FEC_RS;
|
|
if (eth_fec & ETHTOOL_FEC_BASER)
|
|
cc_fec |= FEC_BASER_RS;
|
|
|
|
return cc_fec;
|
|
}
|
|
|
|
static int get_fecparam(struct net_device *dev, struct ethtool_fecparam *fec)
|
|
{
|
|
const struct port_info *pi = netdev_priv(dev);
|
|
const struct link_config *lc = &pi->link_cfg;
|
|
|
|
/* Translate the Firmware FEC Support into the ethtool value. We
|
|
* always support IEEE 802.3 "automatic" selection of Link FEC type if
|
|
* any FEC is supported.
|
|
*/
|
|
fec->fec = fwcap_to_eth_fec(lc->pcaps);
|
|
if (fec->fec != ETHTOOL_FEC_OFF)
|
|
fec->fec |= ETHTOOL_FEC_AUTO;
|
|
|
|
/* Translate the current internal FEC parameters into the
|
|
* ethtool values.
|
|
*/
|
|
fec->active_fec = cc_to_eth_fec(lc->fec);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int set_fecparam(struct net_device *dev, struct ethtool_fecparam *fec)
|
|
{
|
|
struct port_info *pi = netdev_priv(dev);
|
|
struct link_config *lc = &pi->link_cfg;
|
|
struct link_config old_lc;
|
|
int ret;
|
|
|
|
/* Save old Link Configuration in case the L1 Configure below
|
|
* fails.
|
|
*/
|
|
old_lc = *lc;
|
|
|
|
/* Try to perform the L1 Configure and return the result of that
|
|
* effort. If it fails, revert the attempted change.
|
|
*/
|
|
lc->requested_fec = eth_to_cc_fec(fec->fec);
|
|
ret = t4_link_l1cfg(pi->adapter, pi->adapter->mbox,
|
|
pi->tx_chan, lc);
|
|
if (ret)
|
|
*lc = old_lc;
|
|
return ret;
|
|
}
|
|
|
|
static void get_pauseparam(struct net_device *dev,
|
|
struct ethtool_pauseparam *epause)
|
|
{
|
|
struct port_info *p = netdev_priv(dev);
|
|
|
|
epause->autoneg = (p->link_cfg.requested_fc & PAUSE_AUTONEG) != 0;
|
|
epause->rx_pause = (p->link_cfg.fc & PAUSE_RX) != 0;
|
|
epause->tx_pause = (p->link_cfg.fc & PAUSE_TX) != 0;
|
|
}
|
|
|
|
static int set_pauseparam(struct net_device *dev,
|
|
struct ethtool_pauseparam *epause)
|
|
{
|
|
struct port_info *p = netdev_priv(dev);
|
|
struct link_config *lc = &p->link_cfg;
|
|
|
|
if (epause->autoneg == AUTONEG_DISABLE)
|
|
lc->requested_fc = 0;
|
|
else if (lc->pcaps & FW_PORT_CAP32_ANEG)
|
|
lc->requested_fc = PAUSE_AUTONEG;
|
|
else
|
|
return -EINVAL;
|
|
|
|
if (epause->rx_pause)
|
|
lc->requested_fc |= PAUSE_RX;
|
|
if (epause->tx_pause)
|
|
lc->requested_fc |= PAUSE_TX;
|
|
if (netif_running(dev))
|
|
return t4_link_l1cfg(p->adapter, p->adapter->mbox, p->tx_chan,
|
|
lc);
|
|
return 0;
|
|
}
|
|
|
|
static void get_sge_param(struct net_device *dev, struct ethtool_ringparam *e)
|
|
{
|
|
const struct port_info *pi = netdev_priv(dev);
|
|
const struct sge *s = &pi->adapter->sge;
|
|
|
|
e->rx_max_pending = MAX_RX_BUFFERS;
|
|
e->rx_mini_max_pending = MAX_RSPQ_ENTRIES;
|
|
e->rx_jumbo_max_pending = 0;
|
|
e->tx_max_pending = MAX_TXQ_ENTRIES;
|
|
|
|
e->rx_pending = s->ethrxq[pi->first_qset].fl.size - 8;
|
|
e->rx_mini_pending = s->ethrxq[pi->first_qset].rspq.size;
|
|
e->rx_jumbo_pending = 0;
|
|
e->tx_pending = s->ethtxq[pi->first_qset].q.size;
|
|
}
|
|
|
|
static int set_sge_param(struct net_device *dev, struct ethtool_ringparam *e)
|
|
{
|
|
int i;
|
|
const struct port_info *pi = netdev_priv(dev);
|
|
struct adapter *adapter = pi->adapter;
|
|
struct sge *s = &adapter->sge;
|
|
|
|
if (e->rx_pending > MAX_RX_BUFFERS || e->rx_jumbo_pending ||
|
|
e->tx_pending > MAX_TXQ_ENTRIES ||
|
|
e->rx_mini_pending > MAX_RSPQ_ENTRIES ||
|
|
e->rx_mini_pending < MIN_RSPQ_ENTRIES ||
|
|
e->rx_pending < MIN_FL_ENTRIES || e->tx_pending < MIN_TXQ_ENTRIES)
|
|
return -EINVAL;
|
|
|
|
if (adapter->flags & FULL_INIT_DONE)
|
|
return -EBUSY;
|
|
|
|
for (i = 0; i < pi->nqsets; ++i) {
|
|
s->ethtxq[pi->first_qset + i].q.size = e->tx_pending;
|
|
s->ethrxq[pi->first_qset + i].fl.size = e->rx_pending + 8;
|
|
s->ethrxq[pi->first_qset + i].rspq.size = e->rx_mini_pending;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* set_rx_intr_params - set a net devices's RX interrupt holdoff paramete!
|
|
* @dev: the network device
|
|
* @us: the hold-off time in us, or 0 to disable timer
|
|
* @cnt: the hold-off packet count, or 0 to disable counter
|
|
*
|
|
* Set the RX interrupt hold-off parameters for a network device.
|
|
*/
|
|
static int set_rx_intr_params(struct net_device *dev,
|
|
unsigned int us, unsigned int cnt)
|
|
{
|
|
int i, err;
|
|
struct port_info *pi = netdev_priv(dev);
|
|
struct adapter *adap = pi->adapter;
|
|
struct sge_eth_rxq *q = &adap->sge.ethrxq[pi->first_qset];
|
|
|
|
for (i = 0; i < pi->nqsets; i++, q++) {
|
|
err = cxgb4_set_rspq_intr_params(&q->rspq, us, cnt);
|
|
if (err)
|
|
return err;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int set_adaptive_rx_setting(struct net_device *dev, int adaptive_rx)
|
|
{
|
|
int i;
|
|
struct port_info *pi = netdev_priv(dev);
|
|
struct adapter *adap = pi->adapter;
|
|
struct sge_eth_rxq *q = &adap->sge.ethrxq[pi->first_qset];
|
|
|
|
for (i = 0; i < pi->nqsets; i++, q++)
|
|
q->rspq.adaptive_rx = adaptive_rx;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int get_adaptive_rx_setting(struct net_device *dev)
|
|
{
|
|
struct port_info *pi = netdev_priv(dev);
|
|
struct adapter *adap = pi->adapter;
|
|
struct sge_eth_rxq *q = &adap->sge.ethrxq[pi->first_qset];
|
|
|
|
return q->rspq.adaptive_rx;
|
|
}
|
|
|
|
static int set_coalesce(struct net_device *dev, struct ethtool_coalesce *c)
|
|
{
|
|
set_adaptive_rx_setting(dev, c->use_adaptive_rx_coalesce);
|
|
return set_rx_intr_params(dev, c->rx_coalesce_usecs,
|
|
c->rx_max_coalesced_frames);
|
|
}
|
|
|
|
static int get_coalesce(struct net_device *dev, struct ethtool_coalesce *c)
|
|
{
|
|
const struct port_info *pi = netdev_priv(dev);
|
|
const struct adapter *adap = pi->adapter;
|
|
const struct sge_rspq *rq = &adap->sge.ethrxq[pi->first_qset].rspq;
|
|
|
|
c->rx_coalesce_usecs = qtimer_val(adap, rq);
|
|
c->rx_max_coalesced_frames = (rq->intr_params & QINTR_CNT_EN_F) ?
|
|
adap->sge.counter_val[rq->pktcnt_idx] : 0;
|
|
c->use_adaptive_rx_coalesce = get_adaptive_rx_setting(dev);
|
|
return 0;
|
|
}
|
|
|
|
/* The next two routines implement eeprom read/write from physical addresses.
|
|
*/
|
|
static int eeprom_rd_phys(struct adapter *adap, unsigned int phys_addr, u32 *v)
|
|
{
|
|
int vaddr = t4_eeprom_ptov(phys_addr, adap->pf, EEPROMPFSIZE);
|
|
|
|
if (vaddr >= 0)
|
|
vaddr = pci_read_vpd(adap->pdev, vaddr, sizeof(u32), v);
|
|
return vaddr < 0 ? vaddr : 0;
|
|
}
|
|
|
|
static int eeprom_wr_phys(struct adapter *adap, unsigned int phys_addr, u32 v)
|
|
{
|
|
int vaddr = t4_eeprom_ptov(phys_addr, adap->pf, EEPROMPFSIZE);
|
|
|
|
if (vaddr >= 0)
|
|
vaddr = pci_write_vpd(adap->pdev, vaddr, sizeof(u32), &v);
|
|
return vaddr < 0 ? vaddr : 0;
|
|
}
|
|
|
|
#define EEPROM_MAGIC 0x38E2F10C
|
|
|
|
static int get_eeprom(struct net_device *dev, struct ethtool_eeprom *e,
|
|
u8 *data)
|
|
{
|
|
int i, err = 0;
|
|
struct adapter *adapter = netdev2adap(dev);
|
|
u8 *buf = kvzalloc(EEPROMSIZE, GFP_KERNEL);
|
|
|
|
if (!buf)
|
|
return -ENOMEM;
|
|
|
|
e->magic = EEPROM_MAGIC;
|
|
for (i = e->offset & ~3; !err && i < e->offset + e->len; i += 4)
|
|
err = eeprom_rd_phys(adapter, i, (u32 *)&buf[i]);
|
|
|
|
if (!err)
|
|
memcpy(data, buf + e->offset, e->len);
|
|
kvfree(buf);
|
|
return err;
|
|
}
|
|
|
|
static int set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
|
|
u8 *data)
|
|
{
|
|
u8 *buf;
|
|
int err = 0;
|
|
u32 aligned_offset, aligned_len, *p;
|
|
struct adapter *adapter = netdev2adap(dev);
|
|
|
|
if (eeprom->magic != EEPROM_MAGIC)
|
|
return -EINVAL;
|
|
|
|
aligned_offset = eeprom->offset & ~3;
|
|
aligned_len = (eeprom->len + (eeprom->offset & 3) + 3) & ~3;
|
|
|
|
if (adapter->pf > 0) {
|
|
u32 start = 1024 + adapter->pf * EEPROMPFSIZE;
|
|
|
|
if (aligned_offset < start ||
|
|
aligned_offset + aligned_len > start + EEPROMPFSIZE)
|
|
return -EPERM;
|
|
}
|
|
|
|
if (aligned_offset != eeprom->offset || aligned_len != eeprom->len) {
|
|
/* RMW possibly needed for first or last words.
|
|
*/
|
|
buf = kvzalloc(aligned_len, GFP_KERNEL);
|
|
if (!buf)
|
|
return -ENOMEM;
|
|
err = eeprom_rd_phys(adapter, aligned_offset, (u32 *)buf);
|
|
if (!err && aligned_len > 4)
|
|
err = eeprom_rd_phys(adapter,
|
|
aligned_offset + aligned_len - 4,
|
|
(u32 *)&buf[aligned_len - 4]);
|
|
if (err)
|
|
goto out;
|
|
memcpy(buf + (eeprom->offset & 3), data, eeprom->len);
|
|
} else {
|
|
buf = data;
|
|
}
|
|
|
|
err = t4_seeprom_wp(adapter, false);
|
|
if (err)
|
|
goto out;
|
|
|
|
for (p = (u32 *)buf; !err && aligned_len; aligned_len -= 4, p++) {
|
|
err = eeprom_wr_phys(adapter, aligned_offset, *p);
|
|
aligned_offset += 4;
|
|
}
|
|
|
|
if (!err)
|
|
err = t4_seeprom_wp(adapter, true);
|
|
out:
|
|
if (buf != data)
|
|
kvfree(buf);
|
|
return err;
|
|
}
|
|
|
|
static int set_flash(struct net_device *netdev, struct ethtool_flash *ef)
|
|
{
|
|
int ret;
|
|
const struct firmware *fw;
|
|
struct adapter *adap = netdev2adap(netdev);
|
|
unsigned int mbox = PCIE_FW_MASTER_M + 1;
|
|
u32 pcie_fw;
|
|
unsigned int master;
|
|
u8 master_vld = 0;
|
|
|
|
pcie_fw = t4_read_reg(adap, PCIE_FW_A);
|
|
master = PCIE_FW_MASTER_G(pcie_fw);
|
|
if (pcie_fw & PCIE_FW_MASTER_VLD_F)
|
|
master_vld = 1;
|
|
/* if csiostor is the master return */
|
|
if (master_vld && (master != adap->pf)) {
|
|
dev_warn(adap->pdev_dev,
|
|
"cxgb4 driver needs to be loaded as MASTER to support FW flash\n");
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
ef->data[sizeof(ef->data) - 1] = '\0';
|
|
ret = request_firmware(&fw, ef->data, adap->pdev_dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* If the adapter has been fully initialized then we'll go ahead and
|
|
* try to get the firmware's cooperation in upgrading to the new
|
|
* firmware image otherwise we'll try to do the entire job from the
|
|
* host ... and we always "force" the operation in this path.
|
|
*/
|
|
if (adap->flags & FULL_INIT_DONE)
|
|
mbox = adap->mbox;
|
|
|
|
ret = t4_fw_upgrade(adap, mbox, fw->data, fw->size, 1);
|
|
release_firmware(fw);
|
|
if (!ret)
|
|
dev_info(adap->pdev_dev,
|
|
"loaded firmware %s, reload cxgb4 driver\n", ef->data);
|
|
return ret;
|
|
}
|
|
|
|
static int get_ts_info(struct net_device *dev, struct ethtool_ts_info *ts_info)
|
|
{
|
|
struct port_info *pi = netdev_priv(dev);
|
|
struct adapter *adapter = pi->adapter;
|
|
|
|
ts_info->so_timestamping = SOF_TIMESTAMPING_TX_SOFTWARE |
|
|
SOF_TIMESTAMPING_RX_SOFTWARE |
|
|
SOF_TIMESTAMPING_SOFTWARE;
|
|
|
|
ts_info->so_timestamping |= SOF_TIMESTAMPING_RX_HARDWARE |
|
|
SOF_TIMESTAMPING_TX_HARDWARE |
|
|
SOF_TIMESTAMPING_RAW_HARDWARE;
|
|
|
|
ts_info->tx_types = (1 << HWTSTAMP_TX_OFF) |
|
|
(1 << HWTSTAMP_TX_ON);
|
|
|
|
ts_info->rx_filters = (1 << HWTSTAMP_FILTER_NONE) |
|
|
(1 << HWTSTAMP_FILTER_PTP_V2_L4_EVENT) |
|
|
(1 << HWTSTAMP_FILTER_PTP_V1_L4_SYNC) |
|
|
(1 << HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ) |
|
|
(1 << HWTSTAMP_FILTER_PTP_V2_L4_SYNC) |
|
|
(1 << HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ);
|
|
|
|
if (adapter->ptp_clock)
|
|
ts_info->phc_index = ptp_clock_index(adapter->ptp_clock);
|
|
else
|
|
ts_info->phc_index = -1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u32 get_rss_table_size(struct net_device *dev)
|
|
{
|
|
const struct port_info *pi = netdev_priv(dev);
|
|
|
|
return pi->rss_size;
|
|
}
|
|
|
|
static int get_rss_table(struct net_device *dev, u32 *p, u8 *key, u8 *hfunc)
|
|
{
|
|
const struct port_info *pi = netdev_priv(dev);
|
|
unsigned int n = pi->rss_size;
|
|
|
|
if (hfunc)
|
|
*hfunc = ETH_RSS_HASH_TOP;
|
|
if (!p)
|
|
return 0;
|
|
while (n--)
|
|
p[n] = pi->rss[n];
|
|
return 0;
|
|
}
|
|
|
|
static int set_rss_table(struct net_device *dev, const u32 *p, const u8 *key,
|
|
const u8 hfunc)
|
|
{
|
|
unsigned int i;
|
|
struct port_info *pi = netdev_priv(dev);
|
|
|
|
/* We require at least one supported parameter to be changed and no
|
|
* change in any of the unsupported parameters
|
|
*/
|
|
if (key ||
|
|
(hfunc != ETH_RSS_HASH_NO_CHANGE && hfunc != ETH_RSS_HASH_TOP))
|
|
return -EOPNOTSUPP;
|
|
if (!p)
|
|
return 0;
|
|
|
|
/* Interface must be brought up atleast once */
|
|
if (pi->adapter->flags & FULL_INIT_DONE) {
|
|
for (i = 0; i < pi->rss_size; i++)
|
|
pi->rss[i] = p[i];
|
|
|
|
return cxgb4_write_rss(pi, pi->rss);
|
|
}
|
|
|
|
return -EPERM;
|
|
}
|
|
|
|
static int get_rxnfc(struct net_device *dev, struct ethtool_rxnfc *info,
|
|
u32 *rules)
|
|
{
|
|
const struct port_info *pi = netdev_priv(dev);
|
|
|
|
switch (info->cmd) {
|
|
case ETHTOOL_GRXFH: {
|
|
unsigned int v = pi->rss_mode;
|
|
|
|
info->data = 0;
|
|
switch (info->flow_type) {
|
|
case TCP_V4_FLOW:
|
|
if (v & FW_RSS_VI_CONFIG_CMD_IP4FOURTUPEN_F)
|
|
info->data = RXH_IP_SRC | RXH_IP_DST |
|
|
RXH_L4_B_0_1 | RXH_L4_B_2_3;
|
|
else if (v & FW_RSS_VI_CONFIG_CMD_IP4TWOTUPEN_F)
|
|
info->data = RXH_IP_SRC | RXH_IP_DST;
|
|
break;
|
|
case UDP_V4_FLOW:
|
|
if ((v & FW_RSS_VI_CONFIG_CMD_IP4FOURTUPEN_F) &&
|
|
(v & FW_RSS_VI_CONFIG_CMD_UDPEN_F))
|
|
info->data = RXH_IP_SRC | RXH_IP_DST |
|
|
RXH_L4_B_0_1 | RXH_L4_B_2_3;
|
|
else if (v & FW_RSS_VI_CONFIG_CMD_IP4TWOTUPEN_F)
|
|
info->data = RXH_IP_SRC | RXH_IP_DST;
|
|
break;
|
|
case SCTP_V4_FLOW:
|
|
case AH_ESP_V4_FLOW:
|
|
case IPV4_FLOW:
|
|
if (v & FW_RSS_VI_CONFIG_CMD_IP4TWOTUPEN_F)
|
|
info->data = RXH_IP_SRC | RXH_IP_DST;
|
|
break;
|
|
case TCP_V6_FLOW:
|
|
if (v & FW_RSS_VI_CONFIG_CMD_IP6FOURTUPEN_F)
|
|
info->data = RXH_IP_SRC | RXH_IP_DST |
|
|
RXH_L4_B_0_1 | RXH_L4_B_2_3;
|
|
else if (v & FW_RSS_VI_CONFIG_CMD_IP6TWOTUPEN_F)
|
|
info->data = RXH_IP_SRC | RXH_IP_DST;
|
|
break;
|
|
case UDP_V6_FLOW:
|
|
if ((v & FW_RSS_VI_CONFIG_CMD_IP6FOURTUPEN_F) &&
|
|
(v & FW_RSS_VI_CONFIG_CMD_UDPEN_F))
|
|
info->data = RXH_IP_SRC | RXH_IP_DST |
|
|
RXH_L4_B_0_1 | RXH_L4_B_2_3;
|
|
else if (v & FW_RSS_VI_CONFIG_CMD_IP6TWOTUPEN_F)
|
|
info->data = RXH_IP_SRC | RXH_IP_DST;
|
|
break;
|
|
case SCTP_V6_FLOW:
|
|
case AH_ESP_V6_FLOW:
|
|
case IPV6_FLOW:
|
|
if (v & FW_RSS_VI_CONFIG_CMD_IP6TWOTUPEN_F)
|
|
info->data = RXH_IP_SRC | RXH_IP_DST;
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
case ETHTOOL_GRXRINGS:
|
|
info->data = pi->nqsets;
|
|
return 0;
|
|
}
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
static int set_dump(struct net_device *dev, struct ethtool_dump *eth_dump)
|
|
{
|
|
struct adapter *adapter = netdev2adap(dev);
|
|
u32 len = 0;
|
|
|
|
len = sizeof(struct cudbg_hdr) +
|
|
sizeof(struct cudbg_entity_hdr) * CUDBG_MAX_ENTITY;
|
|
len += cxgb4_get_dump_length(adapter, eth_dump->flag);
|
|
|
|
adapter->eth_dump.flag = eth_dump->flag;
|
|
adapter->eth_dump.len = len;
|
|
return 0;
|
|
}
|
|
|
|
static int get_dump_flag(struct net_device *dev, struct ethtool_dump *eth_dump)
|
|
{
|
|
struct adapter *adapter = netdev2adap(dev);
|
|
|
|
eth_dump->flag = adapter->eth_dump.flag;
|
|
eth_dump->len = adapter->eth_dump.len;
|
|
eth_dump->version = adapter->eth_dump.version;
|
|
return 0;
|
|
}
|
|
|
|
static int get_dump_data(struct net_device *dev, struct ethtool_dump *eth_dump,
|
|
void *buf)
|
|
{
|
|
struct adapter *adapter = netdev2adap(dev);
|
|
u32 len = 0;
|
|
int ret = 0;
|
|
|
|
if (adapter->eth_dump.flag == CXGB4_ETH_DUMP_NONE)
|
|
return -ENOENT;
|
|
|
|
len = sizeof(struct cudbg_hdr) +
|
|
sizeof(struct cudbg_entity_hdr) * CUDBG_MAX_ENTITY;
|
|
len += cxgb4_get_dump_length(adapter, adapter->eth_dump.flag);
|
|
if (eth_dump->len < len)
|
|
return -ENOMEM;
|
|
|
|
ret = cxgb4_cudbg_collect(adapter, buf, &len, adapter->eth_dump.flag);
|
|
if (ret)
|
|
return ret;
|
|
|
|
eth_dump->flag = adapter->eth_dump.flag;
|
|
eth_dump->len = len;
|
|
eth_dump->version = adapter->eth_dump.version;
|
|
return 0;
|
|
}
|
|
|
|
static int cxgb4_get_module_info(struct net_device *dev,
|
|
struct ethtool_modinfo *modinfo)
|
|
{
|
|
struct port_info *pi = netdev_priv(dev);
|
|
u8 sff8472_comp, sff_diag_type, sff_rev;
|
|
struct adapter *adapter = pi->adapter;
|
|
int ret;
|
|
|
|
if (!t4_is_inserted_mod_type(pi->mod_type))
|
|
return -EINVAL;
|
|
|
|
switch (pi->port_type) {
|
|
case FW_PORT_TYPE_SFP:
|
|
case FW_PORT_TYPE_QSA:
|
|
case FW_PORT_TYPE_SFP28:
|
|
ret = t4_i2c_rd(adapter, adapter->mbox, pi->tx_chan,
|
|
I2C_DEV_ADDR_A0, SFF_8472_COMP_ADDR,
|
|
SFF_8472_COMP_LEN, &sff8472_comp);
|
|
if (ret)
|
|
return ret;
|
|
ret = t4_i2c_rd(adapter, adapter->mbox, pi->tx_chan,
|
|
I2C_DEV_ADDR_A0, SFP_DIAG_TYPE_ADDR,
|
|
SFP_DIAG_TYPE_LEN, &sff_diag_type);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (!sff8472_comp || (sff_diag_type & 4)) {
|
|
modinfo->type = ETH_MODULE_SFF_8079;
|
|
modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN;
|
|
} else {
|
|
modinfo->type = ETH_MODULE_SFF_8472;
|
|
modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN;
|
|
}
|
|
break;
|
|
|
|
case FW_PORT_TYPE_QSFP:
|
|
case FW_PORT_TYPE_QSFP_10G:
|
|
case FW_PORT_TYPE_CR_QSFP:
|
|
case FW_PORT_TYPE_CR2_QSFP:
|
|
case FW_PORT_TYPE_CR4_QSFP:
|
|
ret = t4_i2c_rd(adapter, adapter->mbox, pi->tx_chan,
|
|
I2C_DEV_ADDR_A0, SFF_REV_ADDR,
|
|
SFF_REV_LEN, &sff_rev);
|
|
/* For QSFP type ports, revision value >= 3
|
|
* means the SFP is 8636 compliant.
|
|
*/
|
|
if (ret)
|
|
return ret;
|
|
if (sff_rev >= 0x3) {
|
|
modinfo->type = ETH_MODULE_SFF_8636;
|
|
modinfo->eeprom_len = ETH_MODULE_SFF_8636_LEN;
|
|
} else {
|
|
modinfo->type = ETH_MODULE_SFF_8436;
|
|
modinfo->eeprom_len = ETH_MODULE_SFF_8436_LEN;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cxgb4_get_module_eeprom(struct net_device *dev,
|
|
struct ethtool_eeprom *eprom, u8 *data)
|
|
{
|
|
int ret = 0, offset = eprom->offset, len = eprom->len;
|
|
struct port_info *pi = netdev_priv(dev);
|
|
struct adapter *adapter = pi->adapter;
|
|
|
|
memset(data, 0, eprom->len);
|
|
if (offset + len <= I2C_PAGE_SIZE)
|
|
return t4_i2c_rd(adapter, adapter->mbox, pi->tx_chan,
|
|
I2C_DEV_ADDR_A0, offset, len, data);
|
|
|
|
/* offset + len spans 0xa0 and 0xa1 pages */
|
|
if (offset <= I2C_PAGE_SIZE) {
|
|
/* read 0xa0 page */
|
|
len = I2C_PAGE_SIZE - offset;
|
|
ret = t4_i2c_rd(adapter, adapter->mbox, pi->tx_chan,
|
|
I2C_DEV_ADDR_A0, offset, len, data);
|
|
if (ret)
|
|
return ret;
|
|
offset = I2C_PAGE_SIZE;
|
|
/* Remaining bytes to be read from second page =
|
|
* Total length - bytes read from first page
|
|
*/
|
|
len = eprom->len - len;
|
|
}
|
|
/* Read additional optical diagnostics from page 0xa2 if supported */
|
|
return t4_i2c_rd(adapter, adapter->mbox, pi->tx_chan, I2C_DEV_ADDR_A2,
|
|
offset, len, &data[eprom->len - len]);
|
|
}
|
|
|
|
static u32 cxgb4_get_priv_flags(struct net_device *netdev)
|
|
{
|
|
struct port_info *pi = netdev_priv(netdev);
|
|
struct adapter *adapter = pi->adapter;
|
|
|
|
return (adapter->eth_flags | pi->eth_flags);
|
|
}
|
|
|
|
/**
|
|
* set_flags - set/unset specified flags if passed in new_flags
|
|
* @cur_flags: pointer to current flags
|
|
* @new_flags: new incoming flags
|
|
* @flags: set of flags to set/unset
|
|
*/
|
|
static inline void set_flags(u32 *cur_flags, u32 new_flags, u32 flags)
|
|
{
|
|
*cur_flags = (*cur_flags & ~flags) | (new_flags & flags);
|
|
}
|
|
|
|
static int cxgb4_set_priv_flags(struct net_device *netdev, u32 flags)
|
|
{
|
|
struct port_info *pi = netdev_priv(netdev);
|
|
struct adapter *adapter = pi->adapter;
|
|
|
|
set_flags(&adapter->eth_flags, flags, PRIV_FLAGS_ADAP);
|
|
set_flags(&pi->eth_flags, flags, PRIV_FLAGS_PORT);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct ethtool_ops cxgb_ethtool_ops = {
|
|
.get_link_ksettings = get_link_ksettings,
|
|
.set_link_ksettings = set_link_ksettings,
|
|
.get_fecparam = get_fecparam,
|
|
.set_fecparam = set_fecparam,
|
|
.get_drvinfo = get_drvinfo,
|
|
.get_msglevel = get_msglevel,
|
|
.set_msglevel = set_msglevel,
|
|
.get_ringparam = get_sge_param,
|
|
.set_ringparam = set_sge_param,
|
|
.get_coalesce = get_coalesce,
|
|
.set_coalesce = set_coalesce,
|
|
.get_eeprom_len = get_eeprom_len,
|
|
.get_eeprom = get_eeprom,
|
|
.set_eeprom = set_eeprom,
|
|
.get_pauseparam = get_pauseparam,
|
|
.set_pauseparam = set_pauseparam,
|
|
.get_link = ethtool_op_get_link,
|
|
.get_strings = get_strings,
|
|
.set_phys_id = identify_port,
|
|
.nway_reset = restart_autoneg,
|
|
.get_sset_count = get_sset_count,
|
|
.get_ethtool_stats = get_stats,
|
|
.get_regs_len = get_regs_len,
|
|
.get_regs = get_regs,
|
|
.get_rxnfc = get_rxnfc,
|
|
.get_rxfh_indir_size = get_rss_table_size,
|
|
.get_rxfh = get_rss_table,
|
|
.set_rxfh = set_rss_table,
|
|
.flash_device = set_flash,
|
|
.get_ts_info = get_ts_info,
|
|
.set_dump = set_dump,
|
|
.get_dump_flag = get_dump_flag,
|
|
.get_dump_data = get_dump_data,
|
|
.get_module_info = cxgb4_get_module_info,
|
|
.get_module_eeprom = cxgb4_get_module_eeprom,
|
|
.get_priv_flags = cxgb4_get_priv_flags,
|
|
.set_priv_flags = cxgb4_set_priv_flags,
|
|
};
|
|
|
|
void cxgb4_set_ethtool_ops(struct net_device *netdev)
|
|
{
|
|
netdev->ethtool_ops = &cxgb_ethtool_ops;
|
|
}
|