mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-14 12:36:52 +07:00
d08cce6a1d
Add SoC reset functions into the PRM code. These functions are based on code from mach-omap2/prcm.c. They reset the SoC using the CORE DPLL reset method (as opposed to one of the other two or three chip reset methods). Adding them here will facilitate their removal from arch/arm/mach-omap2/prcm.c. (prcm.c is deprecated.) Signed-off-by: Paul Walmsley <paul@pwsan.com> Tested-by: Vaibhav Hiremath <hvaibhav@ti.com>
163 lines
6.8 KiB
C
163 lines
6.8 KiB
C
/*
|
|
* OMAP3xxx Power/Reset Management (PRM) register definitions
|
|
*
|
|
* Copyright (C) 2007-2009, 2011-2012 Texas Instruments, Inc.
|
|
* Copyright (C) 2008-2010 Nokia Corporation
|
|
* Paul Walmsley
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* The PRM hardware modules on the OMAP2/3 are quite similar to each
|
|
* other. The PRM on OMAP4 has a new register layout, and is handled
|
|
* in a separate file.
|
|
*/
|
|
#ifndef __ARCH_ARM_MACH_OMAP2_PRM3XXX_H
|
|
#define __ARCH_ARM_MACH_OMAP2_PRM3XXX_H
|
|
|
|
#include "prcm-common.h"
|
|
#include "prm.h"
|
|
#include "prm2xxx_3xxx.h"
|
|
|
|
#define OMAP34XX_PRM_REGADDR(module, reg) \
|
|
OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
|
|
|
|
|
|
/*
|
|
* OMAP3-specific global PRM registers
|
|
* Use __raw_{read,write}l() with these registers.
|
|
*
|
|
* With a few exceptions, these are the register names beginning with
|
|
* PRM_* on 34xx. (The exceptions are the IRQSTATUS and IRQENABLE
|
|
* bits.)
|
|
*/
|
|
|
|
#define OMAP3_PRM_REVISION_OFFSET 0x0004
|
|
#define OMAP3430_PRM_REVISION OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0004)
|
|
#define OMAP3_PRM_SYSCONFIG_OFFSET 0x0014
|
|
#define OMAP3430_PRM_SYSCONFIG OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0014)
|
|
|
|
#define OMAP3_PRM_IRQSTATUS_MPU_OFFSET 0x0018
|
|
#define OMAP3430_PRM_IRQSTATUS_MPU OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0018)
|
|
#define OMAP3_PRM_IRQENABLE_MPU_OFFSET 0x001c
|
|
#define OMAP3430_PRM_IRQENABLE_MPU OMAP34XX_PRM_REGADDR(OCP_MOD, 0x001c)
|
|
|
|
|
|
#define OMAP3_PRM_VC_SMPS_SA_OFFSET 0x0020
|
|
#define OMAP3430_PRM_VC_SMPS_SA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0020)
|
|
#define OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET 0x0024
|
|
#define OMAP3430_PRM_VC_SMPS_VOL_RA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0024)
|
|
#define OMAP3_PRM_VC_SMPS_CMD_RA_OFFSET 0x0028
|
|
#define OMAP3430_PRM_VC_SMPS_CMD_RA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0028)
|
|
#define OMAP3_PRM_VC_CMD_VAL_0_OFFSET 0x002c
|
|
#define OMAP3430_PRM_VC_CMD_VAL_0 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x002c)
|
|
#define OMAP3_PRM_VC_CMD_VAL_1_OFFSET 0x0030
|
|
#define OMAP3430_PRM_VC_CMD_VAL_1 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0030)
|
|
#define OMAP3_PRM_VC_CH_CONF_OFFSET 0x0034
|
|
#define OMAP3430_PRM_VC_CH_CONF OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0034)
|
|
#define OMAP3_PRM_VC_I2C_CFG_OFFSET 0x0038
|
|
#define OMAP3430_PRM_VC_I2C_CFG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0038)
|
|
#define OMAP3_PRM_VC_BYPASS_VAL_OFFSET 0x003c
|
|
#define OMAP3430_PRM_VC_BYPASS_VAL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x003c)
|
|
#define OMAP3_PRM_RSTCTRL_OFFSET 0x0050
|
|
#define OMAP3430_PRM_RSTCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0050)
|
|
#define OMAP3_PRM_RSTTIME_OFFSET 0x0054
|
|
#define OMAP3430_PRM_RSTTIME OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0054)
|
|
#define OMAP3_PRM_RSTST_OFFSET 0x0058
|
|
#define OMAP3430_PRM_RSTST OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0058)
|
|
#define OMAP3_PRM_VOLTCTRL_OFFSET 0x0060
|
|
#define OMAP3430_PRM_VOLTCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0060)
|
|
#define OMAP3_PRM_SRAM_PCHARGE_OFFSET 0x0064
|
|
#define OMAP3430_PRM_SRAM_PCHARGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0064)
|
|
#define OMAP3_PRM_CLKSRC_CTRL_OFFSET 0x0070
|
|
#define OMAP3430_PRM_CLKSRC_CTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0070)
|
|
#define OMAP3_PRM_VOLTSETUP1_OFFSET 0x0090
|
|
#define OMAP3430_PRM_VOLTSETUP1 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0090)
|
|
#define OMAP3_PRM_VOLTOFFSET_OFFSET 0x0094
|
|
#define OMAP3430_PRM_VOLTOFFSET OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0094)
|
|
#define OMAP3_PRM_CLKSETUP_OFFSET 0x0098
|
|
#define OMAP3430_PRM_CLKSETUP OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0098)
|
|
#define OMAP3_PRM_POLCTRL_OFFSET 0x009c
|
|
#define OMAP3430_PRM_POLCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x009c)
|
|
#define OMAP3_PRM_VOLTSETUP2_OFFSET 0x00a0
|
|
#define OMAP3430_PRM_VOLTSETUP2 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00a0)
|
|
#define OMAP3_PRM_VP1_CONFIG_OFFSET 0x00b0
|
|
#define OMAP3430_PRM_VP1_CONFIG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b0)
|
|
#define OMAP3_PRM_VP1_VSTEPMIN_OFFSET 0x00b4
|
|
#define OMAP3430_PRM_VP1_VSTEPMIN OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b4)
|
|
#define OMAP3_PRM_VP1_VSTEPMAX_OFFSET 0x00b8
|
|
#define OMAP3430_PRM_VP1_VSTEPMAX OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b8)
|
|
#define OMAP3_PRM_VP1_VLIMITTO_OFFSET 0x00bc
|
|
#define OMAP3430_PRM_VP1_VLIMITTO OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00bc)
|
|
#define OMAP3_PRM_VP1_VOLTAGE_OFFSET 0x00c0
|
|
#define OMAP3430_PRM_VP1_VOLTAGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c0)
|
|
#define OMAP3_PRM_VP1_STATUS_OFFSET 0x00c4
|
|
#define OMAP3430_PRM_VP1_STATUS OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c4)
|
|
#define OMAP3_PRM_VP2_CONFIG_OFFSET 0x00d0
|
|
#define OMAP3430_PRM_VP2_CONFIG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d0)
|
|
#define OMAP3_PRM_VP2_VSTEPMIN_OFFSET 0x00d4
|
|
#define OMAP3430_PRM_VP2_VSTEPMIN OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d4)
|
|
#define OMAP3_PRM_VP2_VSTEPMAX_OFFSET 0x00d8
|
|
#define OMAP3430_PRM_VP2_VSTEPMAX OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d8)
|
|
#define OMAP3_PRM_VP2_VLIMITTO_OFFSET 0x00dc
|
|
#define OMAP3430_PRM_VP2_VLIMITTO OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00dc)
|
|
#define OMAP3_PRM_VP2_VOLTAGE_OFFSET 0x00e0
|
|
#define OMAP3430_PRM_VP2_VOLTAGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e0)
|
|
#define OMAP3_PRM_VP2_STATUS_OFFSET 0x00e4
|
|
#define OMAP3430_PRM_VP2_STATUS OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e4)
|
|
|
|
#define OMAP3_PRM_CLKSEL_OFFSET 0x0040
|
|
#define OMAP3430_PRM_CLKSEL OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0040)
|
|
#define OMAP3_PRM_CLKOUT_CTRL_OFFSET 0x0070
|
|
#define OMAP3430_PRM_CLKOUT_CTRL OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
|
|
|
|
/* OMAP3 specific register offsets */
|
|
#define OMAP3430ES2_PM_WKEN3 0x00f0
|
|
#define OMAP3430ES2_PM_WKST3 0x00b8
|
|
|
|
#define OMAP3430_PM_MPUGRPSEL 0x00a4
|
|
#define OMAP3430_PM_MPUGRPSEL1 OMAP3430_PM_MPUGRPSEL
|
|
#define OMAP3430ES2_PM_MPUGRPSEL3 0x00f8
|
|
|
|
#define OMAP3430_PM_IVAGRPSEL 0x00a8
|
|
#define OMAP3430_PM_IVAGRPSEL1 OMAP3430_PM_IVAGRPSEL
|
|
#define OMAP3430ES2_PM_IVAGRPSEL3 0x00f4
|
|
|
|
#define OMAP3430_PM_PREPWSTST 0x00e8
|
|
|
|
#define OMAP3430_PRM_IRQSTATUS_IVA2 0x00f8
|
|
#define OMAP3430_PRM_IRQENABLE_IVA2 0x00fc
|
|
|
|
|
|
#ifndef __ASSEMBLER__
|
|
|
|
/* OMAP3-specific VP functions */
|
|
u32 omap3_prm_vp_check_txdone(u8 vp_id);
|
|
void omap3_prm_vp_clear_txdone(u8 vp_id);
|
|
|
|
/*
|
|
* OMAP3 access functions for voltage controller (VC) and
|
|
* voltage proccessor (VP) in the PRM.
|
|
*/
|
|
extern u32 omap3_prm_vcvp_read(u8 offset);
|
|
extern void omap3_prm_vcvp_write(u32 val, u8 offset);
|
|
extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
|
|
|
|
extern void omap3xxx_prm_reconfigure_io_chain(void);
|
|
|
|
/* PRM interrupt-related functions */
|
|
extern void omap3xxx_prm_read_pending_irqs(unsigned long *events);
|
|
extern void omap3xxx_prm_ocp_barrier(void);
|
|
extern void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask);
|
|
extern void omap3xxx_prm_restore_irqen(u32 *saved_mask);
|
|
|
|
extern void omap3xxx_prm_dpll3_reset(void);
|
|
|
|
extern u32 omap3xxx_prm_get_reset_sources(void);
|
|
|
|
#endif /* __ASSEMBLER */
|
|
|
|
|
|
#endif
|