mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-21 11:37:47 +07:00
c8d0267efd
Enumeration Move ecam.h to linux/include/pci-ecam.h (Jayachandran C) Add parent device field to ECAM struct pci_config_window (Jayachandran C) Add generic MCFG table handling (Tomasz Nowicki) Refactor pci_bus_assign_domain_nr() for CONFIG_PCI_DOMAINS_GENERIC (Tomasz Nowicki) Factor DT-specific pci_bus_find_domain_nr() code out (Tomasz Nowicki) Resource management Add devm_request_pci_bus_resources() (Bjorn Helgaas) Unify pci_resource_to_user() declarations (Bjorn Helgaas) Implement pci_resource_to_user() with pcibios_resource_to_bus() (microblaze, powerpc, sparc) (Bjorn Helgaas) Request host bridge window resources (designware, iproc, rcar, xgene, xilinx, xilinx-nwl) (Bjorn Helgaas) Make PCI I/O space optional on ARM32 (Bjorn Helgaas) Ignore write combining when mapping I/O port space (Bjorn Helgaas) Claim bus resources on MIPS PCI_PROBE_ONLY set-ups (Bjorn Helgaas) Remove unicore32 pci=firmware command line parameter handling (Bjorn Helgaas) Support I/O resources when parsing host bridge resources (Jayachandran C) Add helpers to request/release memory and I/O regions (Johannes Thumshirn) Use pci_(request|release)_mem_regions (NVMe, lpfc, GenWQE, ethernet/intel, alx) (Johannes Thumshirn) Extend pci=resource_alignment to specify device/vendor IDs (Koehrer Mathias (ETAS/ESW5)) Add generic pci_bus_claim_resources() (Lorenzo Pieralisi) Claim bus resources on ARM32 PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi) Remove ARM32 and ARM64 arch-specific pcibios_enable_device() (Lorenzo Pieralisi) Add pci_unmap_iospace() to unmap I/O resources (Sinan Kaya) Remove powerpc __pci_mmap_set_pgprot() (Yinghai Lu) PCI device hotplug Allow additional bus numbers for hotplug bridges (Keith Busch) Ignore interrupts during D3cold (Lukas Wunner) Power management Enforce type casting for pci_power_t (Andy Shevchenko) Don't clear d3cold_allowed for PCIe ports (Mika Westerberg) Put PCIe ports into D3 during suspend (Mika Westerberg) Power on bridges before scanning new devices (Mika Westerberg) Runtime resume bridge before rescan (Mika Westerberg) Add runtime PM support for PCIe ports (Mika Westerberg) Remove redundant check of pcie_set_clkpm (Shawn Lin) Virtualization Add function 1 DMA alias quirk for Marvell 88SE9182 (Aaron Sierra) Add DMA alias quirk for Adaptec 3805 (Alex Williamson) Mark Atheros AR9485 and QCA9882 to avoid bus reset (Chris Blake) Add ACS quirk for Solarflare SFC9220 (Edward Cree) MSI Fix PCI_MSI dependencies (Arnd Bergmann) Add pci_msix_desc_addr() helper (Christoph Hellwig) Switch msix_program_entries() to use pci_msix_desc_addr() (Christoph Hellwig) Make the "entries" argument to pci_enable_msix() optional (Christoph Hellwig) Provide sensible IRQ vector alloc/free routines (Christoph Hellwig) Spread interrupt vectors in pci_alloc_irq_vectors() (Christoph Hellwig) Error Handling Bind DPC to Root Ports as well as Downstream Ports (Keith Busch) Remove DPC tristate module option (Keith Busch) Convert Downstream Port Containment driver to use devm_* functions (Mika Westerberg) Generic host bridge driver Select IRQ_DOMAIN (Arnd Bergmann) Claim bus resources on PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi) ACPI host bridge driver Add ARM64 acpi_pci_bus_find_domain_nr() (Tomasz Nowicki) Add ARM64 ACPI support for legacy IRQs parsing and consolidation with DT code (Tomasz Nowicki) Implement ARM64 AML accessors for PCI_Config region (Tomasz Nowicki) Support ARM64 ACPI-based PCI host controller (Tomasz Nowicki) Altera host bridge driver Check link status before retrain link (Ley Foon Tan) Poll for link up status after retraining the link (Ley Foon Tan) Axis ARTPEC-6 host bridge driver Add PCI_MSI_IRQ_DOMAIN dependency (Arnd Bergmann) Add DT binding for Axis ARTPEC-6 PCIe controller (Niklas Cassel) Add Axis ARTPEC-6 PCIe controller driver (Niklas Cassel) Intel VMD host bridge driver Use lock save/restore in interrupt enable path (Jon Derrick) Select device dma ops to override (Keith Busch) Initialize list item in IRQ disable (Keith Busch) Use x86_vector_domain as parent domain (Keith Busch) Separate MSI and MSI-X vector sharing (Keith Busch) Marvell Aardvark host bridge driver Add DT binding for the Aardvark PCIe controller (Thomas Petazzoni) Add Aardvark PCI host controller driver (Thomas Petazzoni) Add Aardvark PCIe support for Armada 3700 (Thomas Petazzoni) Microsoft Hyper-V host bridge driver Fix interrupt cleanup path (Cathy Avery) Don't leak buffer in hv_pci_onchannelcallback() (Vitaly Kuznetsov) Handle all pending messages in hv_pci_onchannelcallback() (Vitaly Kuznetsov) NVIDIA Tegra host bridge driver Program PADS_REFCLK_CFG* always, not just on legacy SoCs (Stephen Warren) Program PADS_REFCLK_CFG* registers with per-SoC values (Stephen Warren) Use lower-case hex consistently for register definitions (Thierry Reding) Use generic pci_remap_iospace() rather than ARM32-specific one (Thierry Reding) Stop setting pcibios_min_mem (Thierry Reding) Renesas R-Car host bridge driver Drop gen2 dummy I/O port region (Bjorn Helgaas) TI DRA7xx host bridge driver Fix return value in case of error (Christophe JAILLET) Xilinx AXI host bridge driver Fix return value in case of error (Christophe JAILLET) Miscellaneous Make bus_attr_resource_alignment static (Ben Dooks) Include <asm/dma.h> for isa_dma_bridge_buggy (Ben Dooks) MAINTAINERS: Add file patterns for PCI device tree bindings (Geert Uytterhoeven) Make host bridge drivers explicitly non-modular (Paul Gortmaker) -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJXoNRtAAoJEFmIoMA60/r8LMkP/3kiNh21QFS6RZGOaDft5/Py n14Zo0w51avspxoI3iyDlBd5q/SssMqi+2c6Ko/fh2D2xMxJgmQOjdMDrIGARxGA qEHk/5IoXquY2/GcptmCk3ap66cJ6kTovS4OPrb73m3fPuknFwFwdzExq22XHbnI crPya6xwQxPLc54VpY/TsgW8E+EKZd/3FW9wuzzNHXrXmTILyhBQzQAA0K470GMx wEXU6kc3M/XhRuF1zjV9/O+H/xguwfnbTpZLvd2NAF6uXKZoRytEHHtNnVqu1hoe UPpDS2xq32pMNbGxGqBetCdIbkY/hWOufmckHI7Yu2OfXBYyHBYMG2je1+nMPkOV WiFhhrchGt5KnEMUwXPS4ROqnSZVpZBl1Fd4s10GhUYkoE2HNKJXta398H9FR1jj 4NEVSi4mSX/+CkaoIN3lXYiaf9P0wv4Wppve4Scr30+VnLjJhm7Vw5La7v12oo6x otrJ/g98AkmnbuUdLeWBUS/+TOcdPjZYbw52rqBsbOOjFm51Zcj6D7kf5WcTypQy HzbvygSVabcioWehUG1uudC8pdJmQlUGx1aES/iu+mZEae4cuUFALu6hDBD9IYnZ 5JdwjVzI0UItEwT3rQt3t4xiAqHADQ0NAVNJVCeREdoy/YQpSoTWGXIpyqCZ1yCm aBykjRsxbKQXlhVeIxuc =NVxu -----END PGP SIGNATURE----- Merge tag 'pci-v4.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Highlights: - ARM64 support for ACPI host bridges - new drivers for Axis ARTPEC-6 and Marvell Aardvark - new pci_alloc_irq_vectors() interface for MSI-X, MSI, legacy INTx - pci_resource_to_user() cleanup (more to come) Detailed summary: Enumeration: - Move ecam.h to linux/include/pci-ecam.h (Jayachandran C) - Add parent device field to ECAM struct pci_config_window (Jayachandran C) - Add generic MCFG table handling (Tomasz Nowicki) - Refactor pci_bus_assign_domain_nr() for CONFIG_PCI_DOMAINS_GENERIC (Tomasz Nowicki) - Factor DT-specific pci_bus_find_domain_nr() code out (Tomasz Nowicki) Resource management: - Add devm_request_pci_bus_resources() (Bjorn Helgaas) - Unify pci_resource_to_user() declarations (Bjorn Helgaas) - Implement pci_resource_to_user() with pcibios_resource_to_bus() (microblaze, powerpc, sparc) (Bjorn Helgaas) - Request host bridge window resources (designware, iproc, rcar, xgene, xilinx, xilinx-nwl) (Bjorn Helgaas) - Make PCI I/O space optional on ARM32 (Bjorn Helgaas) - Ignore write combining when mapping I/O port space (Bjorn Helgaas) - Claim bus resources on MIPS PCI_PROBE_ONLY set-ups (Bjorn Helgaas) - Remove unicore32 pci=firmware command line parameter handling (Bjorn Helgaas) - Support I/O resources when parsing host bridge resources (Jayachandran C) - Add helpers to request/release memory and I/O regions (Johannes Thumshirn) - Use pci_(request|release)_mem_regions (NVMe, lpfc, GenWQE, ethernet/intel, alx) (Johannes Thumshirn) - Extend pci=resource_alignment to specify device/vendor IDs (Koehrer Mathias (ETAS/ESW5)) - Add generic pci_bus_claim_resources() (Lorenzo Pieralisi) - Claim bus resources on ARM32 PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi) - Remove ARM32 and ARM64 arch-specific pcibios_enable_device() (Lorenzo Pieralisi) - Add pci_unmap_iospace() to unmap I/O resources (Sinan Kaya) - Remove powerpc __pci_mmap_set_pgprot() (Yinghai Lu) PCI device hotplug: - Allow additional bus numbers for hotplug bridges (Keith Busch) - Ignore interrupts during D3cold (Lukas Wunner) Power management: - Enforce type casting for pci_power_t (Andy Shevchenko) - Don't clear d3cold_allowed for PCIe ports (Mika Westerberg) - Put PCIe ports into D3 during suspend (Mika Westerberg) - Power on bridges before scanning new devices (Mika Westerberg) - Runtime resume bridge before rescan (Mika Westerberg) - Add runtime PM support for PCIe ports (Mika Westerberg) - Remove redundant check of pcie_set_clkpm (Shawn Lin) Virtualization: - Add function 1 DMA alias quirk for Marvell 88SE9182 (Aaron Sierra) - Add DMA alias quirk for Adaptec 3805 (Alex Williamson) - Mark Atheros AR9485 and QCA9882 to avoid bus reset (Chris Blake) - Add ACS quirk for Solarflare SFC9220 (Edward Cree) MSI: - Fix PCI_MSI dependencies (Arnd Bergmann) - Add pci_msix_desc_addr() helper (Christoph Hellwig) - Switch msix_program_entries() to use pci_msix_desc_addr() (Christoph Hellwig) - Make the "entries" argument to pci_enable_msix() optional (Christoph Hellwig) - Provide sensible IRQ vector alloc/free routines (Christoph Hellwig) - Spread interrupt vectors in pci_alloc_irq_vectors() (Christoph Hellwig) Error Handling: - Bind DPC to Root Ports as well as Downstream Ports (Keith Busch) - Remove DPC tristate module option (Keith Busch) - Convert Downstream Port Containment driver to use devm_* functions (Mika Westerberg) Generic host bridge driver: - Select IRQ_DOMAIN (Arnd Bergmann) - Claim bus resources on PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi) ACPI host bridge driver: - Add ARM64 acpi_pci_bus_find_domain_nr() (Tomasz Nowicki) - Add ARM64 ACPI support for legacy IRQs parsing and consolidation with DT code (Tomasz Nowicki) - Implement ARM64 AML accessors for PCI_Config region (Tomasz Nowicki) - Support ARM64 ACPI-based PCI host controller (Tomasz Nowicki) Altera host bridge driver: - Check link status before retrain link (Ley Foon Tan) - Poll for link up status after retraining the link (Ley Foon Tan) Axis ARTPEC-6 host bridge driver: - Add PCI_MSI_IRQ_DOMAIN dependency (Arnd Bergmann) - Add DT binding for Axis ARTPEC-6 PCIe controller (Niklas Cassel) - Add Axis ARTPEC-6 PCIe controller driver (Niklas Cassel) Intel VMD host bridge driver: - Use lock save/restore in interrupt enable path (Jon Derrick) - Select device dma ops to override (Keith Busch) - Initialize list item in IRQ disable (Keith Busch) - Use x86_vector_domain as parent domain (Keith Busch) - Separate MSI and MSI-X vector sharing (Keith Busch) Marvell Aardvark host bridge driver: - Add DT binding for the Aardvark PCIe controller (Thomas Petazzoni) - Add Aardvark PCI host controller driver (Thomas Petazzoni) - Add Aardvark PCIe support for Armada 3700 (Thomas Petazzoni) Microsoft Hyper-V host bridge driver: - Fix interrupt cleanup path (Cathy Avery) - Don't leak buffer in hv_pci_onchannelcallback() (Vitaly Kuznetsov) - Handle all pending messages in hv_pci_onchannelcallback() (Vitaly Kuznetsov) NVIDIA Tegra host bridge driver: - Program PADS_REFCLK_CFG* always, not just on legacy SoCs (Stephen Warren) - Program PADS_REFCLK_CFG* registers with per-SoC values (Stephen Warren) - Use lower-case hex consistently for register definitions (Thierry Reding) - Use generic pci_remap_iospace() rather than ARM32-specific one (Thierry Reding) - Stop setting pcibios_min_mem (Thierry Reding) Renesas R-Car host bridge driver: - Drop gen2 dummy I/O port region (Bjorn Helgaas) TI DRA7xx host bridge driver: - Fix return value in case of error (Christophe JAILLET) Xilinx AXI host bridge driver: - Fix return value in case of error (Christophe JAILLET) Miscellaneous: - Make bus_attr_resource_alignment static (Ben Dooks) - Include <asm/dma.h> for isa_dma_bridge_buggy (Ben Dooks) - MAINTAINERS: Add file patterns for PCI device tree bindings (Geert Uytterhoeven) - Make host bridge drivers explicitly non-modular (Paul Gortmaker)" * tag 'pci-v4.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (125 commits) PCI: xgene: Make explicitly non-modular PCI: thunder-pem: Make explicitly non-modular PCI: thunder-ecam: Make explicitly non-modular PCI: tegra: Make explicitly non-modular PCI: rcar-gen2: Make explicitly non-modular PCI: rcar: Make explicitly non-modular PCI: mvebu: Make explicitly non-modular PCI: layerscape: Make explicitly non-modular PCI: keystone: Make explicitly non-modular PCI: hisi: Make explicitly non-modular PCI: generic: Make explicitly non-modular PCI: designware-plat: Make it explicitly non-modular PCI: artpec6: Make explicitly non-modular PCI: armada8k: Make explicitly non-modular PCI: artpec: Add PCI_MSI_IRQ_DOMAIN dependency PCI: Add ACS quirk for Solarflare SFC9220 arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700 PCI: aardvark: Add Aardvark PCI host controller driver dt-bindings: add DT binding for the Aardvark PCIe controller PCI: tegra: Program PADS_REFCLK_CFG* registers with per-SoC values ...
1936 lines
51 KiB
C
1936 lines
51 KiB
C
/*
|
|
* drivers/pci/setup-bus.c
|
|
*
|
|
* Extruded from code written by
|
|
* Dave Rusling (david.rusling@reo.mts.dec.com)
|
|
* David Mosberger (davidm@cs.arizona.edu)
|
|
* David Miller (davem@redhat.com)
|
|
*
|
|
* Support routines for initializing a PCI subsystem.
|
|
*/
|
|
|
|
/*
|
|
* Nov 2000, Ivan Kokshaysky <ink@jurassic.park.msu.ru>
|
|
* PCI-PCI bridges cleanup, sorted resource allocation.
|
|
* Feb 2002, Ivan Kokshaysky <ink@jurassic.park.msu.ru>
|
|
* Converted to allocation in 3 passes, which gives
|
|
* tighter packing. Prefetchable range support.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/cache.h>
|
|
#include <linux/slab.h>
|
|
#include "pci.h"
|
|
|
|
unsigned int pci_flags;
|
|
|
|
struct pci_dev_resource {
|
|
struct list_head list;
|
|
struct resource *res;
|
|
struct pci_dev *dev;
|
|
resource_size_t start;
|
|
resource_size_t end;
|
|
resource_size_t add_size;
|
|
resource_size_t min_align;
|
|
unsigned long flags;
|
|
};
|
|
|
|
static void free_list(struct list_head *head)
|
|
{
|
|
struct pci_dev_resource *dev_res, *tmp;
|
|
|
|
list_for_each_entry_safe(dev_res, tmp, head, list) {
|
|
list_del(&dev_res->list);
|
|
kfree(dev_res);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* add_to_list() - add a new resource tracker to the list
|
|
* @head: Head of the list
|
|
* @dev: device corresponding to which the resource
|
|
* belongs
|
|
* @res: The resource to be tracked
|
|
* @add_size: additional size to be optionally added
|
|
* to the resource
|
|
*/
|
|
static int add_to_list(struct list_head *head,
|
|
struct pci_dev *dev, struct resource *res,
|
|
resource_size_t add_size, resource_size_t min_align)
|
|
{
|
|
struct pci_dev_resource *tmp;
|
|
|
|
tmp = kzalloc(sizeof(*tmp), GFP_KERNEL);
|
|
if (!tmp) {
|
|
pr_warn("add_to_list: kmalloc() failed!\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
tmp->res = res;
|
|
tmp->dev = dev;
|
|
tmp->start = res->start;
|
|
tmp->end = res->end;
|
|
tmp->flags = res->flags;
|
|
tmp->add_size = add_size;
|
|
tmp->min_align = min_align;
|
|
|
|
list_add(&tmp->list, head);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void remove_from_list(struct list_head *head,
|
|
struct resource *res)
|
|
{
|
|
struct pci_dev_resource *dev_res, *tmp;
|
|
|
|
list_for_each_entry_safe(dev_res, tmp, head, list) {
|
|
if (dev_res->res == res) {
|
|
list_del(&dev_res->list);
|
|
kfree(dev_res);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
static struct pci_dev_resource *res_to_dev_res(struct list_head *head,
|
|
struct resource *res)
|
|
{
|
|
struct pci_dev_resource *dev_res;
|
|
|
|
list_for_each_entry(dev_res, head, list) {
|
|
if (dev_res->res == res) {
|
|
int idx = res - &dev_res->dev->resource[0];
|
|
|
|
dev_printk(KERN_DEBUG, &dev_res->dev->dev,
|
|
"res[%d]=%pR res_to_dev_res add_size %llx min_align %llx\n",
|
|
idx, dev_res->res,
|
|
(unsigned long long)dev_res->add_size,
|
|
(unsigned long long)dev_res->min_align);
|
|
|
|
return dev_res;
|
|
}
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static resource_size_t get_res_add_size(struct list_head *head,
|
|
struct resource *res)
|
|
{
|
|
struct pci_dev_resource *dev_res;
|
|
|
|
dev_res = res_to_dev_res(head, res);
|
|
return dev_res ? dev_res->add_size : 0;
|
|
}
|
|
|
|
static resource_size_t get_res_add_align(struct list_head *head,
|
|
struct resource *res)
|
|
{
|
|
struct pci_dev_resource *dev_res;
|
|
|
|
dev_res = res_to_dev_res(head, res);
|
|
return dev_res ? dev_res->min_align : 0;
|
|
}
|
|
|
|
|
|
/* Sort resources by alignment */
|
|
static void pdev_sort_resources(struct pci_dev *dev, struct list_head *head)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < PCI_NUM_RESOURCES; i++) {
|
|
struct resource *r;
|
|
struct pci_dev_resource *dev_res, *tmp;
|
|
resource_size_t r_align;
|
|
struct list_head *n;
|
|
|
|
r = &dev->resource[i];
|
|
|
|
if (r->flags & IORESOURCE_PCI_FIXED)
|
|
continue;
|
|
|
|
if (!(r->flags) || r->parent)
|
|
continue;
|
|
|
|
r_align = pci_resource_alignment(dev, r);
|
|
if (!r_align) {
|
|
dev_warn(&dev->dev, "BAR %d: %pR has bogus alignment\n",
|
|
i, r);
|
|
continue;
|
|
}
|
|
|
|
tmp = kzalloc(sizeof(*tmp), GFP_KERNEL);
|
|
if (!tmp)
|
|
panic("pdev_sort_resources(): kmalloc() failed!\n");
|
|
tmp->res = r;
|
|
tmp->dev = dev;
|
|
|
|
/* fallback is smallest one or list is empty*/
|
|
n = head;
|
|
list_for_each_entry(dev_res, head, list) {
|
|
resource_size_t align;
|
|
|
|
align = pci_resource_alignment(dev_res->dev,
|
|
dev_res->res);
|
|
|
|
if (r_align > align) {
|
|
n = &dev_res->list;
|
|
break;
|
|
}
|
|
}
|
|
/* Insert it just before n*/
|
|
list_add_tail(&tmp->list, n);
|
|
}
|
|
}
|
|
|
|
static void __dev_sort_resources(struct pci_dev *dev,
|
|
struct list_head *head)
|
|
{
|
|
u16 class = dev->class >> 8;
|
|
|
|
/* Don't touch classless devices or host bridges or ioapics. */
|
|
if (class == PCI_CLASS_NOT_DEFINED || class == PCI_CLASS_BRIDGE_HOST)
|
|
return;
|
|
|
|
/* Don't touch ioapic devices already enabled by firmware */
|
|
if (class == PCI_CLASS_SYSTEM_PIC) {
|
|
u16 command;
|
|
pci_read_config_word(dev, PCI_COMMAND, &command);
|
|
if (command & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY))
|
|
return;
|
|
}
|
|
|
|
pdev_sort_resources(dev, head);
|
|
}
|
|
|
|
static inline void reset_resource(struct resource *res)
|
|
{
|
|
res->start = 0;
|
|
res->end = 0;
|
|
res->flags = 0;
|
|
}
|
|
|
|
/**
|
|
* reassign_resources_sorted() - satisfy any additional resource requests
|
|
*
|
|
* @realloc_head : head of the list tracking requests requiring additional
|
|
* resources
|
|
* @head : head of the list tracking requests with allocated
|
|
* resources
|
|
*
|
|
* Walk through each element of the realloc_head and try to procure
|
|
* additional resources for the element, provided the element
|
|
* is in the head list.
|
|
*/
|
|
static void reassign_resources_sorted(struct list_head *realloc_head,
|
|
struct list_head *head)
|
|
{
|
|
struct resource *res;
|
|
struct pci_dev_resource *add_res, *tmp;
|
|
struct pci_dev_resource *dev_res;
|
|
resource_size_t add_size, align;
|
|
int idx;
|
|
|
|
list_for_each_entry_safe(add_res, tmp, realloc_head, list) {
|
|
bool found_match = false;
|
|
|
|
res = add_res->res;
|
|
/* skip resource that has been reset */
|
|
if (!res->flags)
|
|
goto out;
|
|
|
|
/* skip this resource if not found in head list */
|
|
list_for_each_entry(dev_res, head, list) {
|
|
if (dev_res->res == res) {
|
|
found_match = true;
|
|
break;
|
|
}
|
|
}
|
|
if (!found_match)/* just skip */
|
|
continue;
|
|
|
|
idx = res - &add_res->dev->resource[0];
|
|
add_size = add_res->add_size;
|
|
align = add_res->min_align;
|
|
if (!resource_size(res)) {
|
|
res->start = align;
|
|
res->end = res->start + add_size - 1;
|
|
if (pci_assign_resource(add_res->dev, idx))
|
|
reset_resource(res);
|
|
} else {
|
|
res->flags |= add_res->flags &
|
|
(IORESOURCE_STARTALIGN|IORESOURCE_SIZEALIGN);
|
|
if (pci_reassign_resource(add_res->dev, idx,
|
|
add_size, align))
|
|
dev_printk(KERN_DEBUG, &add_res->dev->dev,
|
|
"failed to add %llx res[%d]=%pR\n",
|
|
(unsigned long long)add_size,
|
|
idx, res);
|
|
}
|
|
out:
|
|
list_del(&add_res->list);
|
|
kfree(add_res);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* assign_requested_resources_sorted() - satisfy resource requests
|
|
*
|
|
* @head : head of the list tracking requests for resources
|
|
* @fail_head : head of the list tracking requests that could
|
|
* not be allocated
|
|
*
|
|
* Satisfy resource requests of each element in the list. Add
|
|
* requests that could not satisfied to the failed_list.
|
|
*/
|
|
static void assign_requested_resources_sorted(struct list_head *head,
|
|
struct list_head *fail_head)
|
|
{
|
|
struct resource *res;
|
|
struct pci_dev_resource *dev_res;
|
|
int idx;
|
|
|
|
list_for_each_entry(dev_res, head, list) {
|
|
res = dev_res->res;
|
|
idx = res - &dev_res->dev->resource[0];
|
|
if (resource_size(res) &&
|
|
pci_assign_resource(dev_res->dev, idx)) {
|
|
if (fail_head) {
|
|
/*
|
|
* if the failed res is for ROM BAR, and it will
|
|
* be enabled later, don't add it to the list
|
|
*/
|
|
if (!((idx == PCI_ROM_RESOURCE) &&
|
|
(!(res->flags & IORESOURCE_ROM_ENABLE))))
|
|
add_to_list(fail_head,
|
|
dev_res->dev, res,
|
|
0 /* don't care */,
|
|
0 /* don't care */);
|
|
}
|
|
reset_resource(res);
|
|
}
|
|
}
|
|
}
|
|
|
|
static unsigned long pci_fail_res_type_mask(struct list_head *fail_head)
|
|
{
|
|
struct pci_dev_resource *fail_res;
|
|
unsigned long mask = 0;
|
|
|
|
/* check failed type */
|
|
list_for_each_entry(fail_res, fail_head, list)
|
|
mask |= fail_res->flags;
|
|
|
|
/*
|
|
* one pref failed resource will set IORESOURCE_MEM,
|
|
* as we can allocate pref in non-pref range.
|
|
* Will release all assigned non-pref sibling resources
|
|
* according to that bit.
|
|
*/
|
|
return mask & (IORESOURCE_IO | IORESOURCE_MEM | IORESOURCE_PREFETCH);
|
|
}
|
|
|
|
static bool pci_need_to_release(unsigned long mask, struct resource *res)
|
|
{
|
|
if (res->flags & IORESOURCE_IO)
|
|
return !!(mask & IORESOURCE_IO);
|
|
|
|
/* check pref at first */
|
|
if (res->flags & IORESOURCE_PREFETCH) {
|
|
if (mask & IORESOURCE_PREFETCH)
|
|
return true;
|
|
/* count pref if its parent is non-pref */
|
|
else if ((mask & IORESOURCE_MEM) &&
|
|
!(res->parent->flags & IORESOURCE_PREFETCH))
|
|
return true;
|
|
else
|
|
return false;
|
|
}
|
|
|
|
if (res->flags & IORESOURCE_MEM)
|
|
return !!(mask & IORESOURCE_MEM);
|
|
|
|
return false; /* should not get here */
|
|
}
|
|
|
|
static void __assign_resources_sorted(struct list_head *head,
|
|
struct list_head *realloc_head,
|
|
struct list_head *fail_head)
|
|
{
|
|
/*
|
|
* Should not assign requested resources at first.
|
|
* they could be adjacent, so later reassign can not reallocate
|
|
* them one by one in parent resource window.
|
|
* Try to assign requested + add_size at beginning
|
|
* if could do that, could get out early.
|
|
* if could not do that, we still try to assign requested at first,
|
|
* then try to reassign add_size for some resources.
|
|
*
|
|
* Separate three resource type checking if we need to release
|
|
* assigned resource after requested + add_size try.
|
|
* 1. if there is io port assign fail, will release assigned
|
|
* io port.
|
|
* 2. if there is pref mmio assign fail, release assigned
|
|
* pref mmio.
|
|
* if assigned pref mmio's parent is non-pref mmio and there
|
|
* is non-pref mmio assign fail, will release that assigned
|
|
* pref mmio.
|
|
* 3. if there is non-pref mmio assign fail or pref mmio
|
|
* assigned fail, will release assigned non-pref mmio.
|
|
*/
|
|
LIST_HEAD(save_head);
|
|
LIST_HEAD(local_fail_head);
|
|
struct pci_dev_resource *save_res;
|
|
struct pci_dev_resource *dev_res, *tmp_res, *dev_res2;
|
|
unsigned long fail_type;
|
|
resource_size_t add_align, align;
|
|
|
|
/* Check if optional add_size is there */
|
|
if (!realloc_head || list_empty(realloc_head))
|
|
goto requested_and_reassign;
|
|
|
|
/* Save original start, end, flags etc at first */
|
|
list_for_each_entry(dev_res, head, list) {
|
|
if (add_to_list(&save_head, dev_res->dev, dev_res->res, 0, 0)) {
|
|
free_list(&save_head);
|
|
goto requested_and_reassign;
|
|
}
|
|
}
|
|
|
|
/* Update res in head list with add_size in realloc_head list */
|
|
list_for_each_entry_safe(dev_res, tmp_res, head, list) {
|
|
dev_res->res->end += get_res_add_size(realloc_head,
|
|
dev_res->res);
|
|
|
|
/*
|
|
* There are two kinds of additional resources in the list:
|
|
* 1. bridge resource -- IORESOURCE_STARTALIGN
|
|
* 2. SR-IOV resource -- IORESOURCE_SIZEALIGN
|
|
* Here just fix the additional alignment for bridge
|
|
*/
|
|
if (!(dev_res->res->flags & IORESOURCE_STARTALIGN))
|
|
continue;
|
|
|
|
add_align = get_res_add_align(realloc_head, dev_res->res);
|
|
|
|
/*
|
|
* The "head" list is sorted by the alignment to make sure
|
|
* resources with bigger alignment will be assigned first.
|
|
* After we change the alignment of a dev_res in "head" list,
|
|
* we need to reorder the list by alignment to make it
|
|
* consistent.
|
|
*/
|
|
if (add_align > dev_res->res->start) {
|
|
resource_size_t r_size = resource_size(dev_res->res);
|
|
|
|
dev_res->res->start = add_align;
|
|
dev_res->res->end = add_align + r_size - 1;
|
|
|
|
list_for_each_entry(dev_res2, head, list) {
|
|
align = pci_resource_alignment(dev_res2->dev,
|
|
dev_res2->res);
|
|
if (add_align > align) {
|
|
list_move_tail(&dev_res->list,
|
|
&dev_res2->list);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
}
|
|
|
|
/* Try updated head list with add_size added */
|
|
assign_requested_resources_sorted(head, &local_fail_head);
|
|
|
|
/* all assigned with add_size ? */
|
|
if (list_empty(&local_fail_head)) {
|
|
/* Remove head list from realloc_head list */
|
|
list_for_each_entry(dev_res, head, list)
|
|
remove_from_list(realloc_head, dev_res->res);
|
|
free_list(&save_head);
|
|
free_list(head);
|
|
return;
|
|
}
|
|
|
|
/* check failed type */
|
|
fail_type = pci_fail_res_type_mask(&local_fail_head);
|
|
/* remove not need to be released assigned res from head list etc */
|
|
list_for_each_entry_safe(dev_res, tmp_res, head, list)
|
|
if (dev_res->res->parent &&
|
|
!pci_need_to_release(fail_type, dev_res->res)) {
|
|
/* remove it from realloc_head list */
|
|
remove_from_list(realloc_head, dev_res->res);
|
|
remove_from_list(&save_head, dev_res->res);
|
|
list_del(&dev_res->list);
|
|
kfree(dev_res);
|
|
}
|
|
|
|
free_list(&local_fail_head);
|
|
/* Release assigned resource */
|
|
list_for_each_entry(dev_res, head, list)
|
|
if (dev_res->res->parent)
|
|
release_resource(dev_res->res);
|
|
/* Restore start/end/flags from saved list */
|
|
list_for_each_entry(save_res, &save_head, list) {
|
|
struct resource *res = save_res->res;
|
|
|
|
res->start = save_res->start;
|
|
res->end = save_res->end;
|
|
res->flags = save_res->flags;
|
|
}
|
|
free_list(&save_head);
|
|
|
|
requested_and_reassign:
|
|
/* Satisfy the must-have resource requests */
|
|
assign_requested_resources_sorted(head, fail_head);
|
|
|
|
/* Try to satisfy any additional optional resource
|
|
requests */
|
|
if (realloc_head)
|
|
reassign_resources_sorted(realloc_head, head);
|
|
free_list(head);
|
|
}
|
|
|
|
static void pdev_assign_resources_sorted(struct pci_dev *dev,
|
|
struct list_head *add_head,
|
|
struct list_head *fail_head)
|
|
{
|
|
LIST_HEAD(head);
|
|
|
|
__dev_sort_resources(dev, &head);
|
|
__assign_resources_sorted(&head, add_head, fail_head);
|
|
|
|
}
|
|
|
|
static void pbus_assign_resources_sorted(const struct pci_bus *bus,
|
|
struct list_head *realloc_head,
|
|
struct list_head *fail_head)
|
|
{
|
|
struct pci_dev *dev;
|
|
LIST_HEAD(head);
|
|
|
|
list_for_each_entry(dev, &bus->devices, bus_list)
|
|
__dev_sort_resources(dev, &head);
|
|
|
|
__assign_resources_sorted(&head, realloc_head, fail_head);
|
|
}
|
|
|
|
void pci_setup_cardbus(struct pci_bus *bus)
|
|
{
|
|
struct pci_dev *bridge = bus->self;
|
|
struct resource *res;
|
|
struct pci_bus_region region;
|
|
|
|
dev_info(&bridge->dev, "CardBus bridge to %pR\n",
|
|
&bus->busn_res);
|
|
|
|
res = bus->resource[0];
|
|
pcibios_resource_to_bus(bridge->bus, ®ion, res);
|
|
if (res->flags & IORESOURCE_IO) {
|
|
/*
|
|
* The IO resource is allocated a range twice as large as it
|
|
* would normally need. This allows us to set both IO regs.
|
|
*/
|
|
dev_info(&bridge->dev, " bridge window %pR\n", res);
|
|
pci_write_config_dword(bridge, PCI_CB_IO_BASE_0,
|
|
region.start);
|
|
pci_write_config_dword(bridge, PCI_CB_IO_LIMIT_0,
|
|
region.end);
|
|
}
|
|
|
|
res = bus->resource[1];
|
|
pcibios_resource_to_bus(bridge->bus, ®ion, res);
|
|
if (res->flags & IORESOURCE_IO) {
|
|
dev_info(&bridge->dev, " bridge window %pR\n", res);
|
|
pci_write_config_dword(bridge, PCI_CB_IO_BASE_1,
|
|
region.start);
|
|
pci_write_config_dword(bridge, PCI_CB_IO_LIMIT_1,
|
|
region.end);
|
|
}
|
|
|
|
res = bus->resource[2];
|
|
pcibios_resource_to_bus(bridge->bus, ®ion, res);
|
|
if (res->flags & IORESOURCE_MEM) {
|
|
dev_info(&bridge->dev, " bridge window %pR\n", res);
|
|
pci_write_config_dword(bridge, PCI_CB_MEMORY_BASE_0,
|
|
region.start);
|
|
pci_write_config_dword(bridge, PCI_CB_MEMORY_LIMIT_0,
|
|
region.end);
|
|
}
|
|
|
|
res = bus->resource[3];
|
|
pcibios_resource_to_bus(bridge->bus, ®ion, res);
|
|
if (res->flags & IORESOURCE_MEM) {
|
|
dev_info(&bridge->dev, " bridge window %pR\n", res);
|
|
pci_write_config_dword(bridge, PCI_CB_MEMORY_BASE_1,
|
|
region.start);
|
|
pci_write_config_dword(bridge, PCI_CB_MEMORY_LIMIT_1,
|
|
region.end);
|
|
}
|
|
}
|
|
EXPORT_SYMBOL(pci_setup_cardbus);
|
|
|
|
/* Initialize bridges with base/limit values we have collected.
|
|
PCI-to-PCI Bridge Architecture Specification rev. 1.1 (1998)
|
|
requires that if there is no I/O ports or memory behind the
|
|
bridge, corresponding range must be turned off by writing base
|
|
value greater than limit to the bridge's base/limit registers.
|
|
|
|
Note: care must be taken when updating I/O base/limit registers
|
|
of bridges which support 32-bit I/O. This update requires two
|
|
config space writes, so it's quite possible that an I/O window of
|
|
the bridge will have some undesirable address (e.g. 0) after the
|
|
first write. Ditto 64-bit prefetchable MMIO. */
|
|
static void pci_setup_bridge_io(struct pci_dev *bridge)
|
|
{
|
|
struct resource *res;
|
|
struct pci_bus_region region;
|
|
unsigned long io_mask;
|
|
u8 io_base_lo, io_limit_lo;
|
|
u16 l;
|
|
u32 io_upper16;
|
|
|
|
io_mask = PCI_IO_RANGE_MASK;
|
|
if (bridge->io_window_1k)
|
|
io_mask = PCI_IO_1K_RANGE_MASK;
|
|
|
|
/* Set up the top and bottom of the PCI I/O segment for this bus. */
|
|
res = &bridge->resource[PCI_BRIDGE_RESOURCES + 0];
|
|
pcibios_resource_to_bus(bridge->bus, ®ion, res);
|
|
if (res->flags & IORESOURCE_IO) {
|
|
pci_read_config_word(bridge, PCI_IO_BASE, &l);
|
|
io_base_lo = (region.start >> 8) & io_mask;
|
|
io_limit_lo = (region.end >> 8) & io_mask;
|
|
l = ((u16) io_limit_lo << 8) | io_base_lo;
|
|
/* Set up upper 16 bits of I/O base/limit. */
|
|
io_upper16 = (region.end & 0xffff0000) | (region.start >> 16);
|
|
dev_info(&bridge->dev, " bridge window %pR\n", res);
|
|
} else {
|
|
/* Clear upper 16 bits of I/O base/limit. */
|
|
io_upper16 = 0;
|
|
l = 0x00f0;
|
|
}
|
|
/* Temporarily disable the I/O range before updating PCI_IO_BASE. */
|
|
pci_write_config_dword(bridge, PCI_IO_BASE_UPPER16, 0x0000ffff);
|
|
/* Update lower 16 bits of I/O base/limit. */
|
|
pci_write_config_word(bridge, PCI_IO_BASE, l);
|
|
/* Update upper 16 bits of I/O base/limit. */
|
|
pci_write_config_dword(bridge, PCI_IO_BASE_UPPER16, io_upper16);
|
|
}
|
|
|
|
static void pci_setup_bridge_mmio(struct pci_dev *bridge)
|
|
{
|
|
struct resource *res;
|
|
struct pci_bus_region region;
|
|
u32 l;
|
|
|
|
/* Set up the top and bottom of the PCI Memory segment for this bus. */
|
|
res = &bridge->resource[PCI_BRIDGE_RESOURCES + 1];
|
|
pcibios_resource_to_bus(bridge->bus, ®ion, res);
|
|
if (res->flags & IORESOURCE_MEM) {
|
|
l = (region.start >> 16) & 0xfff0;
|
|
l |= region.end & 0xfff00000;
|
|
dev_info(&bridge->dev, " bridge window %pR\n", res);
|
|
} else {
|
|
l = 0x0000fff0;
|
|
}
|
|
pci_write_config_dword(bridge, PCI_MEMORY_BASE, l);
|
|
}
|
|
|
|
static void pci_setup_bridge_mmio_pref(struct pci_dev *bridge)
|
|
{
|
|
struct resource *res;
|
|
struct pci_bus_region region;
|
|
u32 l, bu, lu;
|
|
|
|
/* Clear out the upper 32 bits of PREF limit.
|
|
If PCI_PREF_BASE_UPPER32 was non-zero, this temporarily
|
|
disables PREF range, which is ok. */
|
|
pci_write_config_dword(bridge, PCI_PREF_LIMIT_UPPER32, 0);
|
|
|
|
/* Set up PREF base/limit. */
|
|
bu = lu = 0;
|
|
res = &bridge->resource[PCI_BRIDGE_RESOURCES + 2];
|
|
pcibios_resource_to_bus(bridge->bus, ®ion, res);
|
|
if (res->flags & IORESOURCE_PREFETCH) {
|
|
l = (region.start >> 16) & 0xfff0;
|
|
l |= region.end & 0xfff00000;
|
|
if (res->flags & IORESOURCE_MEM_64) {
|
|
bu = upper_32_bits(region.start);
|
|
lu = upper_32_bits(region.end);
|
|
}
|
|
dev_info(&bridge->dev, " bridge window %pR\n", res);
|
|
} else {
|
|
l = 0x0000fff0;
|
|
}
|
|
pci_write_config_dword(bridge, PCI_PREF_MEMORY_BASE, l);
|
|
|
|
/* Set the upper 32 bits of PREF base & limit. */
|
|
pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32, bu);
|
|
pci_write_config_dword(bridge, PCI_PREF_LIMIT_UPPER32, lu);
|
|
}
|
|
|
|
static void __pci_setup_bridge(struct pci_bus *bus, unsigned long type)
|
|
{
|
|
struct pci_dev *bridge = bus->self;
|
|
|
|
dev_info(&bridge->dev, "PCI bridge to %pR\n",
|
|
&bus->busn_res);
|
|
|
|
if (type & IORESOURCE_IO)
|
|
pci_setup_bridge_io(bridge);
|
|
|
|
if (type & IORESOURCE_MEM)
|
|
pci_setup_bridge_mmio(bridge);
|
|
|
|
if (type & IORESOURCE_PREFETCH)
|
|
pci_setup_bridge_mmio_pref(bridge);
|
|
|
|
pci_write_config_word(bridge, PCI_BRIDGE_CONTROL, bus->bridge_ctl);
|
|
}
|
|
|
|
void __weak pcibios_setup_bridge(struct pci_bus *bus, unsigned long type)
|
|
{
|
|
}
|
|
|
|
void pci_setup_bridge(struct pci_bus *bus)
|
|
{
|
|
unsigned long type = IORESOURCE_IO | IORESOURCE_MEM |
|
|
IORESOURCE_PREFETCH;
|
|
|
|
pcibios_setup_bridge(bus, type);
|
|
__pci_setup_bridge(bus, type);
|
|
}
|
|
|
|
|
|
int pci_claim_bridge_resource(struct pci_dev *bridge, int i)
|
|
{
|
|
if (i < PCI_BRIDGE_RESOURCES || i > PCI_BRIDGE_RESOURCE_END)
|
|
return 0;
|
|
|
|
if (pci_claim_resource(bridge, i) == 0)
|
|
return 0; /* claimed the window */
|
|
|
|
if ((bridge->class >> 8) != PCI_CLASS_BRIDGE_PCI)
|
|
return 0;
|
|
|
|
if (!pci_bus_clip_resource(bridge, i))
|
|
return -EINVAL; /* clipping didn't change anything */
|
|
|
|
switch (i - PCI_BRIDGE_RESOURCES) {
|
|
case 0:
|
|
pci_setup_bridge_io(bridge);
|
|
break;
|
|
case 1:
|
|
pci_setup_bridge_mmio(bridge);
|
|
break;
|
|
case 2:
|
|
pci_setup_bridge_mmio_pref(bridge);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (pci_claim_resource(bridge, i) == 0)
|
|
return 0; /* claimed a smaller window */
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Check whether the bridge supports optional I/O and
|
|
prefetchable memory ranges. If not, the respective
|
|
base/limit registers must be read-only and read as 0. */
|
|
static void pci_bridge_check_ranges(struct pci_bus *bus)
|
|
{
|
|
u16 io;
|
|
u32 pmem;
|
|
struct pci_dev *bridge = bus->self;
|
|
struct resource *b_res;
|
|
|
|
b_res = &bridge->resource[PCI_BRIDGE_RESOURCES];
|
|
b_res[1].flags |= IORESOURCE_MEM;
|
|
|
|
pci_read_config_word(bridge, PCI_IO_BASE, &io);
|
|
if (!io) {
|
|
pci_write_config_word(bridge, PCI_IO_BASE, 0xe0f0);
|
|
pci_read_config_word(bridge, PCI_IO_BASE, &io);
|
|
pci_write_config_word(bridge, PCI_IO_BASE, 0x0);
|
|
}
|
|
if (io)
|
|
b_res[0].flags |= IORESOURCE_IO;
|
|
|
|
/* DECchip 21050 pass 2 errata: the bridge may miss an address
|
|
disconnect boundary by one PCI data phase.
|
|
Workaround: do not use prefetching on this device. */
|
|
if (bridge->vendor == PCI_VENDOR_ID_DEC && bridge->device == 0x0001)
|
|
return;
|
|
|
|
pci_read_config_dword(bridge, PCI_PREF_MEMORY_BASE, &pmem);
|
|
if (!pmem) {
|
|
pci_write_config_dword(bridge, PCI_PREF_MEMORY_BASE,
|
|
0xffe0fff0);
|
|
pci_read_config_dword(bridge, PCI_PREF_MEMORY_BASE, &pmem);
|
|
pci_write_config_dword(bridge, PCI_PREF_MEMORY_BASE, 0x0);
|
|
}
|
|
if (pmem) {
|
|
b_res[2].flags |= IORESOURCE_MEM | IORESOURCE_PREFETCH;
|
|
if ((pmem & PCI_PREF_RANGE_TYPE_MASK) ==
|
|
PCI_PREF_RANGE_TYPE_64) {
|
|
b_res[2].flags |= IORESOURCE_MEM_64;
|
|
b_res[2].flags |= PCI_PREF_RANGE_TYPE_64;
|
|
}
|
|
}
|
|
|
|
/* double check if bridge does support 64 bit pref */
|
|
if (b_res[2].flags & IORESOURCE_MEM_64) {
|
|
u32 mem_base_hi, tmp;
|
|
pci_read_config_dword(bridge, PCI_PREF_BASE_UPPER32,
|
|
&mem_base_hi);
|
|
pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32,
|
|
0xffffffff);
|
|
pci_read_config_dword(bridge, PCI_PREF_BASE_UPPER32, &tmp);
|
|
if (!tmp)
|
|
b_res[2].flags &= ~IORESOURCE_MEM_64;
|
|
pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32,
|
|
mem_base_hi);
|
|
}
|
|
}
|
|
|
|
/* Helper function for sizing routines: find first available
|
|
bus resource of a given type. Note: we intentionally skip
|
|
the bus resources which have already been assigned (that is,
|
|
have non-NULL parent resource). */
|
|
static struct resource *find_free_bus_resource(struct pci_bus *bus,
|
|
unsigned long type_mask, unsigned long type)
|
|
{
|
|
int i;
|
|
struct resource *r;
|
|
|
|
pci_bus_for_each_resource(bus, r, i) {
|
|
if (r == &ioport_resource || r == &iomem_resource)
|
|
continue;
|
|
if (r && (r->flags & type_mask) == type && !r->parent)
|
|
return r;
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
static resource_size_t calculate_iosize(resource_size_t size,
|
|
resource_size_t min_size,
|
|
resource_size_t size1,
|
|
resource_size_t old_size,
|
|
resource_size_t align)
|
|
{
|
|
if (size < min_size)
|
|
size = min_size;
|
|
if (old_size == 1)
|
|
old_size = 0;
|
|
/* To be fixed in 2.5: we should have sort of HAVE_ISA
|
|
flag in the struct pci_bus. */
|
|
#if defined(CONFIG_ISA) || defined(CONFIG_EISA)
|
|
size = (size & 0xff) + ((size & ~0xffUL) << 2);
|
|
#endif
|
|
size = ALIGN(size + size1, align);
|
|
if (size < old_size)
|
|
size = old_size;
|
|
return size;
|
|
}
|
|
|
|
static resource_size_t calculate_memsize(resource_size_t size,
|
|
resource_size_t min_size,
|
|
resource_size_t size1,
|
|
resource_size_t old_size,
|
|
resource_size_t align)
|
|
{
|
|
if (size < min_size)
|
|
size = min_size;
|
|
if (old_size == 1)
|
|
old_size = 0;
|
|
if (size < old_size)
|
|
size = old_size;
|
|
size = ALIGN(size + size1, align);
|
|
return size;
|
|
}
|
|
|
|
resource_size_t __weak pcibios_window_alignment(struct pci_bus *bus,
|
|
unsigned long type)
|
|
{
|
|
return 1;
|
|
}
|
|
|
|
#define PCI_P2P_DEFAULT_MEM_ALIGN 0x100000 /* 1MiB */
|
|
#define PCI_P2P_DEFAULT_IO_ALIGN 0x1000 /* 4KiB */
|
|
#define PCI_P2P_DEFAULT_IO_ALIGN_1K 0x400 /* 1KiB */
|
|
|
|
static resource_size_t window_alignment(struct pci_bus *bus,
|
|
unsigned long type)
|
|
{
|
|
resource_size_t align = 1, arch_align;
|
|
|
|
if (type & IORESOURCE_MEM)
|
|
align = PCI_P2P_DEFAULT_MEM_ALIGN;
|
|
else if (type & IORESOURCE_IO) {
|
|
/*
|
|
* Per spec, I/O windows are 4K-aligned, but some
|
|
* bridges have an extension to support 1K alignment.
|
|
*/
|
|
if (bus->self->io_window_1k)
|
|
align = PCI_P2P_DEFAULT_IO_ALIGN_1K;
|
|
else
|
|
align = PCI_P2P_DEFAULT_IO_ALIGN;
|
|
}
|
|
|
|
arch_align = pcibios_window_alignment(bus, type);
|
|
return max(align, arch_align);
|
|
}
|
|
|
|
/**
|
|
* pbus_size_io() - size the io window of a given bus
|
|
*
|
|
* @bus : the bus
|
|
* @min_size : the minimum io window that must to be allocated
|
|
* @add_size : additional optional io window
|
|
* @realloc_head : track the additional io window on this list
|
|
*
|
|
* Sizing the IO windows of the PCI-PCI bridge is trivial,
|
|
* since these windows have 1K or 4K granularity and the IO ranges
|
|
* of non-bridge PCI devices are limited to 256 bytes.
|
|
* We must be careful with the ISA aliasing though.
|
|
*/
|
|
static void pbus_size_io(struct pci_bus *bus, resource_size_t min_size,
|
|
resource_size_t add_size, struct list_head *realloc_head)
|
|
{
|
|
struct pci_dev *dev;
|
|
struct resource *b_res = find_free_bus_resource(bus, IORESOURCE_IO,
|
|
IORESOURCE_IO);
|
|
resource_size_t size = 0, size0 = 0, size1 = 0;
|
|
resource_size_t children_add_size = 0;
|
|
resource_size_t min_align, align;
|
|
|
|
if (!b_res)
|
|
return;
|
|
|
|
min_align = window_alignment(bus, IORESOURCE_IO);
|
|
list_for_each_entry(dev, &bus->devices, bus_list) {
|
|
int i;
|
|
|
|
for (i = 0; i < PCI_NUM_RESOURCES; i++) {
|
|
struct resource *r = &dev->resource[i];
|
|
unsigned long r_size;
|
|
|
|
if (r->parent || !(r->flags & IORESOURCE_IO))
|
|
continue;
|
|
r_size = resource_size(r);
|
|
|
|
if (r_size < 0x400)
|
|
/* Might be re-aligned for ISA */
|
|
size += r_size;
|
|
else
|
|
size1 += r_size;
|
|
|
|
align = pci_resource_alignment(dev, r);
|
|
if (align > min_align)
|
|
min_align = align;
|
|
|
|
if (realloc_head)
|
|
children_add_size += get_res_add_size(realloc_head, r);
|
|
}
|
|
}
|
|
|
|
size0 = calculate_iosize(size, min_size, size1,
|
|
resource_size(b_res), min_align);
|
|
if (children_add_size > add_size)
|
|
add_size = children_add_size;
|
|
size1 = (!realloc_head || (realloc_head && !add_size)) ? size0 :
|
|
calculate_iosize(size, min_size, add_size + size1,
|
|
resource_size(b_res), min_align);
|
|
if (!size0 && !size1) {
|
|
if (b_res->start || b_res->end)
|
|
dev_info(&bus->self->dev, "disabling bridge window %pR to %pR (unused)\n",
|
|
b_res, &bus->busn_res);
|
|
b_res->flags = 0;
|
|
return;
|
|
}
|
|
|
|
b_res->start = min_align;
|
|
b_res->end = b_res->start + size0 - 1;
|
|
b_res->flags |= IORESOURCE_STARTALIGN;
|
|
if (size1 > size0 && realloc_head) {
|
|
add_to_list(realloc_head, bus->self, b_res, size1-size0,
|
|
min_align);
|
|
dev_printk(KERN_DEBUG, &bus->self->dev, "bridge window %pR to %pR add_size %llx\n",
|
|
b_res, &bus->busn_res,
|
|
(unsigned long long)size1-size0);
|
|
}
|
|
}
|
|
|
|
static inline resource_size_t calculate_mem_align(resource_size_t *aligns,
|
|
int max_order)
|
|
{
|
|
resource_size_t align = 0;
|
|
resource_size_t min_align = 0;
|
|
int order;
|
|
|
|
for (order = 0; order <= max_order; order++) {
|
|
resource_size_t align1 = 1;
|
|
|
|
align1 <<= (order + 20);
|
|
|
|
if (!align)
|
|
min_align = align1;
|
|
else if (ALIGN(align + min_align, min_align) < align1)
|
|
min_align = align1 >> 1;
|
|
align += aligns[order];
|
|
}
|
|
|
|
return min_align;
|
|
}
|
|
|
|
/**
|
|
* pbus_size_mem() - size the memory window of a given bus
|
|
*
|
|
* @bus : the bus
|
|
* @mask: mask the resource flag, then compare it with type
|
|
* @type: the type of free resource from bridge
|
|
* @type2: second match type
|
|
* @type3: third match type
|
|
* @min_size : the minimum memory window that must to be allocated
|
|
* @add_size : additional optional memory window
|
|
* @realloc_head : track the additional memory window on this list
|
|
*
|
|
* Calculate the size of the bus and minimal alignment which
|
|
* guarantees that all child resources fit in this size.
|
|
*
|
|
* Returns -ENOSPC if there's no available bus resource of the desired type.
|
|
* Otherwise, sets the bus resource start/end to indicate the required
|
|
* size, adds things to realloc_head (if supplied), and returns 0.
|
|
*/
|
|
static int pbus_size_mem(struct pci_bus *bus, unsigned long mask,
|
|
unsigned long type, unsigned long type2,
|
|
unsigned long type3,
|
|
resource_size_t min_size, resource_size_t add_size,
|
|
struct list_head *realloc_head)
|
|
{
|
|
struct pci_dev *dev;
|
|
resource_size_t min_align, align, size, size0, size1;
|
|
resource_size_t aligns[18]; /* Alignments from 1Mb to 128Gb */
|
|
int order, max_order;
|
|
struct resource *b_res = find_free_bus_resource(bus,
|
|
mask | IORESOURCE_PREFETCH, type);
|
|
resource_size_t children_add_size = 0;
|
|
resource_size_t children_add_align = 0;
|
|
resource_size_t add_align = 0;
|
|
|
|
if (!b_res)
|
|
return -ENOSPC;
|
|
|
|
memset(aligns, 0, sizeof(aligns));
|
|
max_order = 0;
|
|
size = 0;
|
|
|
|
list_for_each_entry(dev, &bus->devices, bus_list) {
|
|
int i;
|
|
|
|
for (i = 0; i < PCI_NUM_RESOURCES; i++) {
|
|
struct resource *r = &dev->resource[i];
|
|
resource_size_t r_size;
|
|
|
|
if (r->parent || (r->flags & IORESOURCE_PCI_FIXED) ||
|
|
((r->flags & mask) != type &&
|
|
(r->flags & mask) != type2 &&
|
|
(r->flags & mask) != type3))
|
|
continue;
|
|
r_size = resource_size(r);
|
|
#ifdef CONFIG_PCI_IOV
|
|
/* put SRIOV requested res to the optional list */
|
|
if (realloc_head && i >= PCI_IOV_RESOURCES &&
|
|
i <= PCI_IOV_RESOURCE_END) {
|
|
add_align = max(pci_resource_alignment(dev, r), add_align);
|
|
r->end = r->start - 1;
|
|
add_to_list(realloc_head, dev, r, r_size, 0/* don't care */);
|
|
children_add_size += r_size;
|
|
continue;
|
|
}
|
|
#endif
|
|
/*
|
|
* aligns[0] is for 1MB (since bridge memory
|
|
* windows are always at least 1MB aligned), so
|
|
* keep "order" from being negative for smaller
|
|
* resources.
|
|
*/
|
|
align = pci_resource_alignment(dev, r);
|
|
order = __ffs(align) - 20;
|
|
if (order < 0)
|
|
order = 0;
|
|
if (order >= ARRAY_SIZE(aligns)) {
|
|
dev_warn(&dev->dev, "disabling BAR %d: %pR (bad alignment %#llx)\n",
|
|
i, r, (unsigned long long) align);
|
|
r->flags = 0;
|
|
continue;
|
|
}
|
|
size += r_size;
|
|
/* Exclude ranges with size > align from
|
|
calculation of the alignment. */
|
|
if (r_size == align)
|
|
aligns[order] += align;
|
|
if (order > max_order)
|
|
max_order = order;
|
|
|
|
if (realloc_head) {
|
|
children_add_size += get_res_add_size(realloc_head, r);
|
|
children_add_align = get_res_add_align(realloc_head, r);
|
|
add_align = max(add_align, children_add_align);
|
|
}
|
|
}
|
|
}
|
|
|
|
min_align = calculate_mem_align(aligns, max_order);
|
|
min_align = max(min_align, window_alignment(bus, b_res->flags));
|
|
size0 = calculate_memsize(size, min_size, 0, resource_size(b_res), min_align);
|
|
add_align = max(min_align, add_align);
|
|
if (children_add_size > add_size)
|
|
add_size = children_add_size;
|
|
size1 = (!realloc_head || (realloc_head && !add_size)) ? size0 :
|
|
calculate_memsize(size, min_size, add_size,
|
|
resource_size(b_res), add_align);
|
|
if (!size0 && !size1) {
|
|
if (b_res->start || b_res->end)
|
|
dev_info(&bus->self->dev, "disabling bridge window %pR to %pR (unused)\n",
|
|
b_res, &bus->busn_res);
|
|
b_res->flags = 0;
|
|
return 0;
|
|
}
|
|
b_res->start = min_align;
|
|
b_res->end = size0 + min_align - 1;
|
|
b_res->flags |= IORESOURCE_STARTALIGN;
|
|
if (size1 > size0 && realloc_head) {
|
|
add_to_list(realloc_head, bus->self, b_res, size1-size0, add_align);
|
|
dev_printk(KERN_DEBUG, &bus->self->dev, "bridge window %pR to %pR add_size %llx add_align %llx\n",
|
|
b_res, &bus->busn_res,
|
|
(unsigned long long) (size1 - size0),
|
|
(unsigned long long) add_align);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
unsigned long pci_cardbus_resource_alignment(struct resource *res)
|
|
{
|
|
if (res->flags & IORESOURCE_IO)
|
|
return pci_cardbus_io_size;
|
|
if (res->flags & IORESOURCE_MEM)
|
|
return pci_cardbus_mem_size;
|
|
return 0;
|
|
}
|
|
|
|
static void pci_bus_size_cardbus(struct pci_bus *bus,
|
|
struct list_head *realloc_head)
|
|
{
|
|
struct pci_dev *bridge = bus->self;
|
|
struct resource *b_res = &bridge->resource[PCI_BRIDGE_RESOURCES];
|
|
resource_size_t b_res_3_size = pci_cardbus_mem_size * 2;
|
|
u16 ctrl;
|
|
|
|
if (b_res[0].parent)
|
|
goto handle_b_res_1;
|
|
/*
|
|
* Reserve some resources for CardBus. We reserve
|
|
* a fixed amount of bus space for CardBus bridges.
|
|
*/
|
|
b_res[0].start = pci_cardbus_io_size;
|
|
b_res[0].end = b_res[0].start + pci_cardbus_io_size - 1;
|
|
b_res[0].flags |= IORESOURCE_IO | IORESOURCE_STARTALIGN;
|
|
if (realloc_head) {
|
|
b_res[0].end -= pci_cardbus_io_size;
|
|
add_to_list(realloc_head, bridge, b_res, pci_cardbus_io_size,
|
|
pci_cardbus_io_size);
|
|
}
|
|
|
|
handle_b_res_1:
|
|
if (b_res[1].parent)
|
|
goto handle_b_res_2;
|
|
b_res[1].start = pci_cardbus_io_size;
|
|
b_res[1].end = b_res[1].start + pci_cardbus_io_size - 1;
|
|
b_res[1].flags |= IORESOURCE_IO | IORESOURCE_STARTALIGN;
|
|
if (realloc_head) {
|
|
b_res[1].end -= pci_cardbus_io_size;
|
|
add_to_list(realloc_head, bridge, b_res+1, pci_cardbus_io_size,
|
|
pci_cardbus_io_size);
|
|
}
|
|
|
|
handle_b_res_2:
|
|
/* MEM1 must not be pref mmio */
|
|
pci_read_config_word(bridge, PCI_CB_BRIDGE_CONTROL, &ctrl);
|
|
if (ctrl & PCI_CB_BRIDGE_CTL_PREFETCH_MEM1) {
|
|
ctrl &= ~PCI_CB_BRIDGE_CTL_PREFETCH_MEM1;
|
|
pci_write_config_word(bridge, PCI_CB_BRIDGE_CONTROL, ctrl);
|
|
pci_read_config_word(bridge, PCI_CB_BRIDGE_CONTROL, &ctrl);
|
|
}
|
|
|
|
/*
|
|
* Check whether prefetchable memory is supported
|
|
* by this bridge.
|
|
*/
|
|
pci_read_config_word(bridge, PCI_CB_BRIDGE_CONTROL, &ctrl);
|
|
if (!(ctrl & PCI_CB_BRIDGE_CTL_PREFETCH_MEM0)) {
|
|
ctrl |= PCI_CB_BRIDGE_CTL_PREFETCH_MEM0;
|
|
pci_write_config_word(bridge, PCI_CB_BRIDGE_CONTROL, ctrl);
|
|
pci_read_config_word(bridge, PCI_CB_BRIDGE_CONTROL, &ctrl);
|
|
}
|
|
|
|
if (b_res[2].parent)
|
|
goto handle_b_res_3;
|
|
/*
|
|
* If we have prefetchable memory support, allocate
|
|
* two regions. Otherwise, allocate one region of
|
|
* twice the size.
|
|
*/
|
|
if (ctrl & PCI_CB_BRIDGE_CTL_PREFETCH_MEM0) {
|
|
b_res[2].start = pci_cardbus_mem_size;
|
|
b_res[2].end = b_res[2].start + pci_cardbus_mem_size - 1;
|
|
b_res[2].flags |= IORESOURCE_MEM | IORESOURCE_PREFETCH |
|
|
IORESOURCE_STARTALIGN;
|
|
if (realloc_head) {
|
|
b_res[2].end -= pci_cardbus_mem_size;
|
|
add_to_list(realloc_head, bridge, b_res+2,
|
|
pci_cardbus_mem_size, pci_cardbus_mem_size);
|
|
}
|
|
|
|
/* reduce that to half */
|
|
b_res_3_size = pci_cardbus_mem_size;
|
|
}
|
|
|
|
handle_b_res_3:
|
|
if (b_res[3].parent)
|
|
goto handle_done;
|
|
b_res[3].start = pci_cardbus_mem_size;
|
|
b_res[3].end = b_res[3].start + b_res_3_size - 1;
|
|
b_res[3].flags |= IORESOURCE_MEM | IORESOURCE_STARTALIGN;
|
|
if (realloc_head) {
|
|
b_res[3].end -= b_res_3_size;
|
|
add_to_list(realloc_head, bridge, b_res+3, b_res_3_size,
|
|
pci_cardbus_mem_size);
|
|
}
|
|
|
|
handle_done:
|
|
;
|
|
}
|
|
|
|
void __pci_bus_size_bridges(struct pci_bus *bus, struct list_head *realloc_head)
|
|
{
|
|
struct pci_dev *dev;
|
|
unsigned long mask, prefmask, type2 = 0, type3 = 0;
|
|
resource_size_t additional_mem_size = 0, additional_io_size = 0;
|
|
struct resource *b_res;
|
|
int ret;
|
|
|
|
list_for_each_entry(dev, &bus->devices, bus_list) {
|
|
struct pci_bus *b = dev->subordinate;
|
|
if (!b)
|
|
continue;
|
|
|
|
switch (dev->class >> 8) {
|
|
case PCI_CLASS_BRIDGE_CARDBUS:
|
|
pci_bus_size_cardbus(b, realloc_head);
|
|
break;
|
|
|
|
case PCI_CLASS_BRIDGE_PCI:
|
|
default:
|
|
__pci_bus_size_bridges(b, realloc_head);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* The root bus? */
|
|
if (pci_is_root_bus(bus))
|
|
return;
|
|
|
|
switch (bus->self->class >> 8) {
|
|
case PCI_CLASS_BRIDGE_CARDBUS:
|
|
/* don't size cardbuses yet. */
|
|
break;
|
|
|
|
case PCI_CLASS_BRIDGE_PCI:
|
|
pci_bridge_check_ranges(bus);
|
|
if (bus->self->is_hotplug_bridge) {
|
|
additional_io_size = pci_hotplug_io_size;
|
|
additional_mem_size = pci_hotplug_mem_size;
|
|
}
|
|
/* Fall through */
|
|
default:
|
|
pbus_size_io(bus, realloc_head ? 0 : additional_io_size,
|
|
additional_io_size, realloc_head);
|
|
|
|
/*
|
|
* If there's a 64-bit prefetchable MMIO window, compute
|
|
* the size required to put all 64-bit prefetchable
|
|
* resources in it.
|
|
*/
|
|
b_res = &bus->self->resource[PCI_BRIDGE_RESOURCES];
|
|
mask = IORESOURCE_MEM;
|
|
prefmask = IORESOURCE_MEM | IORESOURCE_PREFETCH;
|
|
if (b_res[2].flags & IORESOURCE_MEM_64) {
|
|
prefmask |= IORESOURCE_MEM_64;
|
|
ret = pbus_size_mem(bus, prefmask, prefmask,
|
|
prefmask, prefmask,
|
|
realloc_head ? 0 : additional_mem_size,
|
|
additional_mem_size, realloc_head);
|
|
|
|
/*
|
|
* If successful, all non-prefetchable resources
|
|
* and any 32-bit prefetchable resources will go in
|
|
* the non-prefetchable window.
|
|
*/
|
|
if (ret == 0) {
|
|
mask = prefmask;
|
|
type2 = prefmask & ~IORESOURCE_MEM_64;
|
|
type3 = prefmask & ~IORESOURCE_PREFETCH;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* If there is no 64-bit prefetchable window, compute the
|
|
* size required to put all prefetchable resources in the
|
|
* 32-bit prefetchable window (if there is one).
|
|
*/
|
|
if (!type2) {
|
|
prefmask &= ~IORESOURCE_MEM_64;
|
|
ret = pbus_size_mem(bus, prefmask, prefmask,
|
|
prefmask, prefmask,
|
|
realloc_head ? 0 : additional_mem_size,
|
|
additional_mem_size, realloc_head);
|
|
|
|
/*
|
|
* If successful, only non-prefetchable resources
|
|
* will go in the non-prefetchable window.
|
|
*/
|
|
if (ret == 0)
|
|
mask = prefmask;
|
|
else
|
|
additional_mem_size += additional_mem_size;
|
|
|
|
type2 = type3 = IORESOURCE_MEM;
|
|
}
|
|
|
|
/*
|
|
* Compute the size required to put everything else in the
|
|
* non-prefetchable window. This includes:
|
|
*
|
|
* - all non-prefetchable resources
|
|
* - 32-bit prefetchable resources if there's a 64-bit
|
|
* prefetchable window or no prefetchable window at all
|
|
* - 64-bit prefetchable resources if there's no
|
|
* prefetchable window at all
|
|
*
|
|
* Note that the strategy in __pci_assign_resource() must
|
|
* match that used here. Specifically, we cannot put a
|
|
* 32-bit prefetchable resource in a 64-bit prefetchable
|
|
* window.
|
|
*/
|
|
pbus_size_mem(bus, mask, IORESOURCE_MEM, type2, type3,
|
|
realloc_head ? 0 : additional_mem_size,
|
|
additional_mem_size, realloc_head);
|
|
break;
|
|
}
|
|
}
|
|
|
|
void pci_bus_size_bridges(struct pci_bus *bus)
|
|
{
|
|
__pci_bus_size_bridges(bus, NULL);
|
|
}
|
|
EXPORT_SYMBOL(pci_bus_size_bridges);
|
|
|
|
static void assign_fixed_resource_on_bus(struct pci_bus *b, struct resource *r)
|
|
{
|
|
int i;
|
|
struct resource *parent_r;
|
|
unsigned long mask = IORESOURCE_IO | IORESOURCE_MEM |
|
|
IORESOURCE_PREFETCH;
|
|
|
|
pci_bus_for_each_resource(b, parent_r, i) {
|
|
if (!parent_r)
|
|
continue;
|
|
|
|
if ((r->flags & mask) == (parent_r->flags & mask) &&
|
|
resource_contains(parent_r, r))
|
|
request_resource(parent_r, r);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Try to assign any resources marked as IORESOURCE_PCI_FIXED, as they
|
|
* are skipped by pbus_assign_resources_sorted().
|
|
*/
|
|
static void pdev_assign_fixed_resources(struct pci_dev *dev)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < PCI_NUM_RESOURCES; i++) {
|
|
struct pci_bus *b;
|
|
struct resource *r = &dev->resource[i];
|
|
|
|
if (r->parent || !(r->flags & IORESOURCE_PCI_FIXED) ||
|
|
!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM)))
|
|
continue;
|
|
|
|
b = dev->bus;
|
|
while (b && !r->parent) {
|
|
assign_fixed_resource_on_bus(b, r);
|
|
b = b->parent;
|
|
}
|
|
}
|
|
}
|
|
|
|
void __pci_bus_assign_resources(const struct pci_bus *bus,
|
|
struct list_head *realloc_head,
|
|
struct list_head *fail_head)
|
|
{
|
|
struct pci_bus *b;
|
|
struct pci_dev *dev;
|
|
|
|
pbus_assign_resources_sorted(bus, realloc_head, fail_head);
|
|
|
|
list_for_each_entry(dev, &bus->devices, bus_list) {
|
|
pdev_assign_fixed_resources(dev);
|
|
|
|
b = dev->subordinate;
|
|
if (!b)
|
|
continue;
|
|
|
|
__pci_bus_assign_resources(b, realloc_head, fail_head);
|
|
|
|
switch (dev->class >> 8) {
|
|
case PCI_CLASS_BRIDGE_PCI:
|
|
if (!pci_is_enabled(dev))
|
|
pci_setup_bridge(b);
|
|
break;
|
|
|
|
case PCI_CLASS_BRIDGE_CARDBUS:
|
|
pci_setup_cardbus(b);
|
|
break;
|
|
|
|
default:
|
|
dev_info(&dev->dev, "not setting up bridge for bus %04x:%02x\n",
|
|
pci_domain_nr(b), b->number);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
void pci_bus_assign_resources(const struct pci_bus *bus)
|
|
{
|
|
__pci_bus_assign_resources(bus, NULL, NULL);
|
|
}
|
|
EXPORT_SYMBOL(pci_bus_assign_resources);
|
|
|
|
static void pci_claim_device_resources(struct pci_dev *dev)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < PCI_BRIDGE_RESOURCES; i++) {
|
|
struct resource *r = &dev->resource[i];
|
|
|
|
if (!r->flags || r->parent)
|
|
continue;
|
|
|
|
pci_claim_resource(dev, i);
|
|
}
|
|
}
|
|
|
|
static void pci_claim_bridge_resources(struct pci_dev *dev)
|
|
{
|
|
int i;
|
|
|
|
for (i = PCI_BRIDGE_RESOURCES; i < PCI_NUM_RESOURCES; i++) {
|
|
struct resource *r = &dev->resource[i];
|
|
|
|
if (!r->flags || r->parent)
|
|
continue;
|
|
|
|
pci_claim_bridge_resource(dev, i);
|
|
}
|
|
}
|
|
|
|
static void pci_bus_allocate_dev_resources(struct pci_bus *b)
|
|
{
|
|
struct pci_dev *dev;
|
|
struct pci_bus *child;
|
|
|
|
list_for_each_entry(dev, &b->devices, bus_list) {
|
|
pci_claim_device_resources(dev);
|
|
|
|
child = dev->subordinate;
|
|
if (child)
|
|
pci_bus_allocate_dev_resources(child);
|
|
}
|
|
}
|
|
|
|
static void pci_bus_allocate_resources(struct pci_bus *b)
|
|
{
|
|
struct pci_bus *child;
|
|
|
|
/*
|
|
* Carry out a depth-first search on the PCI bus
|
|
* tree to allocate bridge apertures. Read the
|
|
* programmed bridge bases and recursively claim
|
|
* the respective bridge resources.
|
|
*/
|
|
if (b->self) {
|
|
pci_read_bridge_bases(b);
|
|
pci_claim_bridge_resources(b->self);
|
|
}
|
|
|
|
list_for_each_entry(child, &b->children, node)
|
|
pci_bus_allocate_resources(child);
|
|
}
|
|
|
|
void pci_bus_claim_resources(struct pci_bus *b)
|
|
{
|
|
pci_bus_allocate_resources(b);
|
|
pci_bus_allocate_dev_resources(b);
|
|
}
|
|
EXPORT_SYMBOL(pci_bus_claim_resources);
|
|
|
|
static void __pci_bridge_assign_resources(const struct pci_dev *bridge,
|
|
struct list_head *add_head,
|
|
struct list_head *fail_head)
|
|
{
|
|
struct pci_bus *b;
|
|
|
|
pdev_assign_resources_sorted((struct pci_dev *)bridge,
|
|
add_head, fail_head);
|
|
|
|
b = bridge->subordinate;
|
|
if (!b)
|
|
return;
|
|
|
|
__pci_bus_assign_resources(b, add_head, fail_head);
|
|
|
|
switch (bridge->class >> 8) {
|
|
case PCI_CLASS_BRIDGE_PCI:
|
|
pci_setup_bridge(b);
|
|
break;
|
|
|
|
case PCI_CLASS_BRIDGE_CARDBUS:
|
|
pci_setup_cardbus(b);
|
|
break;
|
|
|
|
default:
|
|
dev_info(&bridge->dev, "not setting up bridge for bus %04x:%02x\n",
|
|
pci_domain_nr(b), b->number);
|
|
break;
|
|
}
|
|
}
|
|
static void pci_bridge_release_resources(struct pci_bus *bus,
|
|
unsigned long type)
|
|
{
|
|
struct pci_dev *dev = bus->self;
|
|
struct resource *r;
|
|
unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM |
|
|
IORESOURCE_PREFETCH | IORESOURCE_MEM_64;
|
|
unsigned old_flags = 0;
|
|
struct resource *b_res;
|
|
int idx = 1;
|
|
|
|
b_res = &dev->resource[PCI_BRIDGE_RESOURCES];
|
|
|
|
/*
|
|
* 1. if there is io port assign fail, will release bridge
|
|
* io port.
|
|
* 2. if there is non pref mmio assign fail, release bridge
|
|
* nonpref mmio.
|
|
* 3. if there is 64bit pref mmio assign fail, and bridge pref
|
|
* is 64bit, release bridge pref mmio.
|
|
* 4. if there is pref mmio assign fail, and bridge pref is
|
|
* 32bit mmio, release bridge pref mmio
|
|
* 5. if there is pref mmio assign fail, and bridge pref is not
|
|
* assigned, release bridge nonpref mmio.
|
|
*/
|
|
if (type & IORESOURCE_IO)
|
|
idx = 0;
|
|
else if (!(type & IORESOURCE_PREFETCH))
|
|
idx = 1;
|
|
else if ((type & IORESOURCE_MEM_64) &&
|
|
(b_res[2].flags & IORESOURCE_MEM_64))
|
|
idx = 2;
|
|
else if (!(b_res[2].flags & IORESOURCE_MEM_64) &&
|
|
(b_res[2].flags & IORESOURCE_PREFETCH))
|
|
idx = 2;
|
|
else
|
|
idx = 1;
|
|
|
|
r = &b_res[idx];
|
|
|
|
if (!r->parent)
|
|
return;
|
|
|
|
/*
|
|
* if there are children under that, we should release them
|
|
* all
|
|
*/
|
|
release_child_resources(r);
|
|
if (!release_resource(r)) {
|
|
type = old_flags = r->flags & type_mask;
|
|
dev_printk(KERN_DEBUG, &dev->dev, "resource %d %pR released\n",
|
|
PCI_BRIDGE_RESOURCES + idx, r);
|
|
/* keep the old size */
|
|
r->end = resource_size(r) - 1;
|
|
r->start = 0;
|
|
r->flags = 0;
|
|
|
|
/* avoiding touch the one without PREF */
|
|
if (type & IORESOURCE_PREFETCH)
|
|
type = IORESOURCE_PREFETCH;
|
|
__pci_setup_bridge(bus, type);
|
|
/* for next child res under same bridge */
|
|
r->flags = old_flags;
|
|
}
|
|
}
|
|
|
|
enum release_type {
|
|
leaf_only,
|
|
whole_subtree,
|
|
};
|
|
/*
|
|
* try to release pci bridge resources that is from leaf bridge,
|
|
* so we can allocate big new one later
|
|
*/
|
|
static void pci_bus_release_bridge_resources(struct pci_bus *bus,
|
|
unsigned long type,
|
|
enum release_type rel_type)
|
|
{
|
|
struct pci_dev *dev;
|
|
bool is_leaf_bridge = true;
|
|
|
|
list_for_each_entry(dev, &bus->devices, bus_list) {
|
|
struct pci_bus *b = dev->subordinate;
|
|
if (!b)
|
|
continue;
|
|
|
|
is_leaf_bridge = false;
|
|
|
|
if ((dev->class >> 8) != PCI_CLASS_BRIDGE_PCI)
|
|
continue;
|
|
|
|
if (rel_type == whole_subtree)
|
|
pci_bus_release_bridge_resources(b, type,
|
|
whole_subtree);
|
|
}
|
|
|
|
if (pci_is_root_bus(bus))
|
|
return;
|
|
|
|
if ((bus->self->class >> 8) != PCI_CLASS_BRIDGE_PCI)
|
|
return;
|
|
|
|
if ((rel_type == whole_subtree) || is_leaf_bridge)
|
|
pci_bridge_release_resources(bus, type);
|
|
}
|
|
|
|
static void pci_bus_dump_res(struct pci_bus *bus)
|
|
{
|
|
struct resource *res;
|
|
int i;
|
|
|
|
pci_bus_for_each_resource(bus, res, i) {
|
|
if (!res || !res->end || !res->flags)
|
|
continue;
|
|
|
|
dev_printk(KERN_DEBUG, &bus->dev, "resource %d %pR\n", i, res);
|
|
}
|
|
}
|
|
|
|
static void pci_bus_dump_resources(struct pci_bus *bus)
|
|
{
|
|
struct pci_bus *b;
|
|
struct pci_dev *dev;
|
|
|
|
|
|
pci_bus_dump_res(bus);
|
|
|
|
list_for_each_entry(dev, &bus->devices, bus_list) {
|
|
b = dev->subordinate;
|
|
if (!b)
|
|
continue;
|
|
|
|
pci_bus_dump_resources(b);
|
|
}
|
|
}
|
|
|
|
static int pci_bus_get_depth(struct pci_bus *bus)
|
|
{
|
|
int depth = 0;
|
|
struct pci_bus *child_bus;
|
|
|
|
list_for_each_entry(child_bus, &bus->children, node) {
|
|
int ret;
|
|
|
|
ret = pci_bus_get_depth(child_bus);
|
|
if (ret + 1 > depth)
|
|
depth = ret + 1;
|
|
}
|
|
|
|
return depth;
|
|
}
|
|
|
|
/*
|
|
* -1: undefined, will auto detect later
|
|
* 0: disabled by user
|
|
* 1: disabled by auto detect
|
|
* 2: enabled by user
|
|
* 3: enabled by auto detect
|
|
*/
|
|
enum enable_type {
|
|
undefined = -1,
|
|
user_disabled,
|
|
auto_disabled,
|
|
user_enabled,
|
|
auto_enabled,
|
|
};
|
|
|
|
static enum enable_type pci_realloc_enable = undefined;
|
|
void __init pci_realloc_get_opt(char *str)
|
|
{
|
|
if (!strncmp(str, "off", 3))
|
|
pci_realloc_enable = user_disabled;
|
|
else if (!strncmp(str, "on", 2))
|
|
pci_realloc_enable = user_enabled;
|
|
}
|
|
static bool pci_realloc_enabled(enum enable_type enable)
|
|
{
|
|
return enable >= user_enabled;
|
|
}
|
|
|
|
#if defined(CONFIG_PCI_IOV) && defined(CONFIG_PCI_REALLOC_ENABLE_AUTO)
|
|
static int iov_resources_unassigned(struct pci_dev *dev, void *data)
|
|
{
|
|
int i;
|
|
bool *unassigned = data;
|
|
|
|
for (i = PCI_IOV_RESOURCES; i <= PCI_IOV_RESOURCE_END; i++) {
|
|
struct resource *r = &dev->resource[i];
|
|
struct pci_bus_region region;
|
|
|
|
/* Not assigned or rejected by kernel? */
|
|
if (!r->flags)
|
|
continue;
|
|
|
|
pcibios_resource_to_bus(dev->bus, ®ion, r);
|
|
if (!region.start) {
|
|
*unassigned = true;
|
|
return 1; /* return early from pci_walk_bus() */
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static enum enable_type pci_realloc_detect(struct pci_bus *bus,
|
|
enum enable_type enable_local)
|
|
{
|
|
bool unassigned = false;
|
|
|
|
if (enable_local != undefined)
|
|
return enable_local;
|
|
|
|
pci_walk_bus(bus, iov_resources_unassigned, &unassigned);
|
|
if (unassigned)
|
|
return auto_enabled;
|
|
|
|
return enable_local;
|
|
}
|
|
#else
|
|
static enum enable_type pci_realloc_detect(struct pci_bus *bus,
|
|
enum enable_type enable_local)
|
|
{
|
|
return enable_local;
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* first try will not touch pci bridge res
|
|
* second and later try will clear small leaf bridge res
|
|
* will stop till to the max depth if can not find good one
|
|
*/
|
|
void pci_assign_unassigned_root_bus_resources(struct pci_bus *bus)
|
|
{
|
|
LIST_HEAD(realloc_head); /* list of resources that
|
|
want additional resources */
|
|
struct list_head *add_list = NULL;
|
|
int tried_times = 0;
|
|
enum release_type rel_type = leaf_only;
|
|
LIST_HEAD(fail_head);
|
|
struct pci_dev_resource *fail_res;
|
|
unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM |
|
|
IORESOURCE_PREFETCH | IORESOURCE_MEM_64;
|
|
int pci_try_num = 1;
|
|
enum enable_type enable_local;
|
|
|
|
/* don't realloc if asked to do so */
|
|
enable_local = pci_realloc_detect(bus, pci_realloc_enable);
|
|
if (pci_realloc_enabled(enable_local)) {
|
|
int max_depth = pci_bus_get_depth(bus);
|
|
|
|
pci_try_num = max_depth + 1;
|
|
dev_printk(KERN_DEBUG, &bus->dev,
|
|
"max bus depth: %d pci_try_num: %d\n",
|
|
max_depth, pci_try_num);
|
|
}
|
|
|
|
again:
|
|
/*
|
|
* last try will use add_list, otherwise will try good to have as
|
|
* must have, so can realloc parent bridge resource
|
|
*/
|
|
if (tried_times + 1 == pci_try_num)
|
|
add_list = &realloc_head;
|
|
/* Depth first, calculate sizes and alignments of all
|
|
subordinate buses. */
|
|
__pci_bus_size_bridges(bus, add_list);
|
|
|
|
/* Depth last, allocate resources and update the hardware. */
|
|
__pci_bus_assign_resources(bus, add_list, &fail_head);
|
|
if (add_list)
|
|
BUG_ON(!list_empty(add_list));
|
|
tried_times++;
|
|
|
|
/* any device complain? */
|
|
if (list_empty(&fail_head))
|
|
goto dump;
|
|
|
|
if (tried_times >= pci_try_num) {
|
|
if (enable_local == undefined)
|
|
dev_info(&bus->dev, "Some PCI device resources are unassigned, try booting with pci=realloc\n");
|
|
else if (enable_local == auto_enabled)
|
|
dev_info(&bus->dev, "Automatically enabled pci realloc, if you have problem, try booting with pci=realloc=off\n");
|
|
|
|
free_list(&fail_head);
|
|
goto dump;
|
|
}
|
|
|
|
dev_printk(KERN_DEBUG, &bus->dev,
|
|
"No. %d try to assign unassigned res\n", tried_times + 1);
|
|
|
|
/* third times and later will not check if it is leaf */
|
|
if ((tried_times + 1) > 2)
|
|
rel_type = whole_subtree;
|
|
|
|
/*
|
|
* Try to release leaf bridge's resources that doesn't fit resource of
|
|
* child device under that bridge
|
|
*/
|
|
list_for_each_entry(fail_res, &fail_head, list)
|
|
pci_bus_release_bridge_resources(fail_res->dev->bus,
|
|
fail_res->flags & type_mask,
|
|
rel_type);
|
|
|
|
/* restore size and flags */
|
|
list_for_each_entry(fail_res, &fail_head, list) {
|
|
struct resource *res = fail_res->res;
|
|
|
|
res->start = fail_res->start;
|
|
res->end = fail_res->end;
|
|
res->flags = fail_res->flags;
|
|
if (fail_res->dev->subordinate)
|
|
res->flags = 0;
|
|
}
|
|
free_list(&fail_head);
|
|
|
|
goto again;
|
|
|
|
dump:
|
|
/* dump the resource on buses */
|
|
pci_bus_dump_resources(bus);
|
|
}
|
|
|
|
void __init pci_assign_unassigned_resources(void)
|
|
{
|
|
struct pci_bus *root_bus;
|
|
|
|
list_for_each_entry(root_bus, &pci_root_buses, node)
|
|
pci_assign_unassigned_root_bus_resources(root_bus);
|
|
}
|
|
|
|
void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge)
|
|
{
|
|
struct pci_bus *parent = bridge->subordinate;
|
|
LIST_HEAD(add_list); /* list of resources that
|
|
want additional resources */
|
|
int tried_times = 0;
|
|
LIST_HEAD(fail_head);
|
|
struct pci_dev_resource *fail_res;
|
|
int retval;
|
|
unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM |
|
|
IORESOURCE_PREFETCH | IORESOURCE_MEM_64;
|
|
|
|
again:
|
|
__pci_bus_size_bridges(parent, &add_list);
|
|
__pci_bridge_assign_resources(bridge, &add_list, &fail_head);
|
|
BUG_ON(!list_empty(&add_list));
|
|
tried_times++;
|
|
|
|
if (list_empty(&fail_head))
|
|
goto enable_all;
|
|
|
|
if (tried_times >= 2) {
|
|
/* still fail, don't need to try more */
|
|
free_list(&fail_head);
|
|
goto enable_all;
|
|
}
|
|
|
|
printk(KERN_DEBUG "PCI: No. %d try to assign unassigned res\n",
|
|
tried_times + 1);
|
|
|
|
/*
|
|
* Try to release leaf bridge's resources that doesn't fit resource of
|
|
* child device under that bridge
|
|
*/
|
|
list_for_each_entry(fail_res, &fail_head, list)
|
|
pci_bus_release_bridge_resources(fail_res->dev->bus,
|
|
fail_res->flags & type_mask,
|
|
whole_subtree);
|
|
|
|
/* restore size and flags */
|
|
list_for_each_entry(fail_res, &fail_head, list) {
|
|
struct resource *res = fail_res->res;
|
|
|
|
res->start = fail_res->start;
|
|
res->end = fail_res->end;
|
|
res->flags = fail_res->flags;
|
|
if (fail_res->dev->subordinate)
|
|
res->flags = 0;
|
|
}
|
|
free_list(&fail_head);
|
|
|
|
goto again;
|
|
|
|
enable_all:
|
|
retval = pci_reenable_device(bridge);
|
|
if (retval)
|
|
dev_err(&bridge->dev, "Error reenabling bridge (%d)\n", retval);
|
|
pci_set_master(bridge);
|
|
}
|
|
EXPORT_SYMBOL_GPL(pci_assign_unassigned_bridge_resources);
|
|
|
|
void pci_assign_unassigned_bus_resources(struct pci_bus *bus)
|
|
{
|
|
struct pci_dev *dev;
|
|
LIST_HEAD(add_list); /* list of resources that
|
|
want additional resources */
|
|
|
|
down_read(&pci_bus_sem);
|
|
list_for_each_entry(dev, &bus->devices, bus_list)
|
|
if (pci_is_bridge(dev) && pci_has_subordinate(dev))
|
|
__pci_bus_size_bridges(dev->subordinate,
|
|
&add_list);
|
|
up_read(&pci_bus_sem);
|
|
__pci_bus_assign_resources(bus, &add_list, NULL);
|
|
BUG_ON(!list_empty(&add_list));
|
|
}
|
|
EXPORT_SYMBOL_GPL(pci_assign_unassigned_bus_resources);
|