linux_dsm_epyc7002/drivers/tty/serial
Vivek Gautam ce73460054 tty: serial: qcom_geni_serial: Update the oversampling rate
For QUP IP versions 2.5 and above the oversampling rate is halved
from 32 to 16. Update this rate after reading hardware version
register, so that the clock divider value is correctly set to
achieve required baud rate.

Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Link: https://lore.kernel.org/r/20190801121153.10613-1-vivek.gautam@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04 12:43:50 +02:00
..
8250 serial: 8250_exar: Clear buffer before shutdown 2019-09-04 12:43:50 +02:00
cpm_uart tty: cpm_uart: drop unused iflag macro 2019-05-24 10:09:16 +02:00
jsm
21285.c
altera_jtaguart.c
altera_uart.c
amba-pl010.c
amba-pl011.c tty: Remove dev_err() usage after platform_get_irq() 2019-09-04 12:43:49 +02:00
amba-pl011.h
apbuart.c
apbuart.h
ar933x_uart.c
arc_uart.c
atmel_serial.c
atmel_serial.h
bcm63xx_uart.c
clps711x.c
digicolor-usart.c tty/serial: digicolor: Fix digicolor-usart already registered warning 2019-06-10 19:08:31 +02:00
dz.c
dz.h
earlycon-arm-semihost.c
earlycon-riscv-sbi.c
earlycon.c
efm32-uart.c
fsl_lpuart.c tty: Remove dev_err() usage after platform_get_irq() 2019-09-04 12:43:49 +02:00
icom.c tty: serial: Remove call to memset after pci_alloc_consistent 2019-09-04 12:43:44 +02:00
icom.h
ifx6x60.c
ifx6x60.h
imx.c serial: imx: get rid of imx_uart_rts_auto() 2019-09-04 12:43:46 +02:00
ioc3_serial.c
ioc4_serial.c
ip22zilog.c
ip22zilog.h
Kconfig tty: serial: netx: Delete driver 2019-07-25 12:05:28 +02:00
kgdb_nmi.c
kgdboc.c kgdboc: disable the console lock when in kgdb 2019-07-30 17:39:39 +02:00
lantiq.c
lpc32xx_hs.c tty: Remove dev_err() usage after platform_get_irq() 2019-09-04 12:43:49 +02:00
Makefile tty: serial: netx: Delete driver 2019-07-25 12:05:28 +02:00
max310x.c Merge 5.2-rc3 into tty-next 2019-06-03 13:53:20 +02:00
max3100.c
mcf.c
men_z135_uart.c
meson_uart.c
milbeaut_usio.c
mpc52xx_uart.c
mps2-uart.c
msm_serial.c tty: serial: msm_serial: avoid system lockup condition 2019-06-10 19:42:35 +02:00
mux.c
mvebu-uart.c tty: Remove dev_err() usage after platform_get_irq() 2019-09-04 12:43:49 +02:00
mxs-auart.c
omap-serial.c
owl-uart.c tty: Remove dev_err() usage after platform_get_irq() 2019-09-04 12:43:49 +02:00
pch_uart.c
pic32_uart.c
pic32_uart.h
pmac_zilog.c
pmac_zilog.h
pnx8xxx_uart.c
pxa.c
qcom_geni_serial.c tty: serial: qcom_geni_serial: Update the oversampling rate 2019-09-04 12:43:50 +02:00
rda-uart.c tty: Remove dev_err() usage after platform_get_irq() 2019-09-04 12:43:49 +02:00
rp2.c
sa1100.c serial: sa1100: add note about modem control signals 2019-06-04 12:56:33 +01:00
samsung.c
samsung.h
sb1250-duart.c
sc16is7xx.c
sccnxp.c tty: Remove dev_err() usage after platform_get_irq() 2019-09-04 12:43:49 +02:00
serial_core.c tty: serial_core: Set port active bit in uart_port_activate 2019-06-18 09:52:26 +02:00
serial_ks8695.c
serial_mctrl_gpio.c serial: mctrl_gpio: Check if GPIO property exisits before requesting it 2019-06-21 10:18:43 +02:00
serial_mctrl_gpio.h
serial_txx9.c
serial-tegra.c tty: Remove dev_err() usage after platform_get_irq() 2019-09-04 12:43:49 +02:00
sh-sci.c serial: sh-sci: use driver core functions, not sysfs ones. 2019-09-04 12:43:49 +02:00
sh-sci.h
sifive.c tty: Remove dev_err() usage after platform_get_irq() 2019-09-04 12:43:49 +02:00
sirfsoc_uart.c
sirfsoc_uart.h
sn_console.c
sprd_serial.c tty: Remove dev_err() usage after platform_get_irq() 2019-09-04 12:43:49 +02:00
st-asc.c
stm32-usart.c tty: Remove dev_err() usage after platform_get_irq() 2019-09-04 12:43:49 +02:00
stm32-usart.h serial: stm32: add support of RX FIFO threshold 2019-06-21 11:17:36 +02:00
suncore.c
sunhv.c sunhv: Fix device naming inconsistency between sunhv_console and sunhv_reg 2019-06-13 14:04:37 -07:00
sunsab.c
sunsab.h
sunsu.c
sunzilog.c
sunzilog.h
tegra-tcu.c
timbuart.c
timbuart.h
uartlite.c
ucc_uart.c docs: serial: move it to the driver-api 2019-07-15 11:03:03 -03:00
vr41xx_siu.c
vt8500_serial.c
xilinx_uartps.c xilinx_uartps.c: suppress "may be used uninitialised" warning 2019-09-04 12:43:49 +02:00
zs.c
zs.h