mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-22 00:29:34 +07:00
3b259e3659
Of the various WOL options provided in include/linux/ethtool.h, the L1 NIC supports only magic packet. Remove all options except magic packet from the atl1 driver. Signed-off-by: Jay Cliburn <jcliburn@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
3699 lines
100 KiB
C
3699 lines
100 KiB
C
/*
|
|
* Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved.
|
|
* Copyright(c) 2006 - 2007 Chris Snook <csnook@redhat.com>
|
|
* Copyright(c) 2006 - 2008 Jay Cliburn <jcliburn@gmail.com>
|
|
*
|
|
* Derived from Intel e1000 driver
|
|
* Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the Free
|
|
* Software Foundation; either version 2 of the License, or (at your option)
|
|
* any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along with
|
|
* this program; if not, write to the Free Software Foundation, Inc., 59
|
|
* Temple Place - Suite 330, Boston, MA 02111-1307, USA.
|
|
*
|
|
* The full GNU General Public License is included in this distribution in the
|
|
* file called COPYING.
|
|
*
|
|
* Contact Information:
|
|
* Xiong Huang <xiong.huang@atheros.com>
|
|
* Jie Yang <jie.yang@atheros.com>
|
|
* Chris Snook <csnook@redhat.com>
|
|
* Jay Cliburn <jcliburn@gmail.com>
|
|
*
|
|
* This version is adapted from the Attansic reference driver.
|
|
*
|
|
* TODO:
|
|
* Add more ethtool functions.
|
|
* Fix abstruse irq enable/disable condition described here:
|
|
* http://marc.theaimsgroup.com/?l=linux-netdev&m=116398508500553&w=2
|
|
*
|
|
* NEEDS TESTING:
|
|
* VLAN
|
|
* multicast
|
|
* promiscuous mode
|
|
* interrupt coalescing
|
|
* SMP torture testing
|
|
*/
|
|
|
|
#include <asm/atomic.h>
|
|
#include <asm/byteorder.h>
|
|
|
|
#include <linux/compiler.h>
|
|
#include <linux/crc32.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/hardirq.h>
|
|
#include <linux/if_ether.h>
|
|
#include <linux/if_vlan.h>
|
|
#include <linux/in.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/ip.h>
|
|
#include <linux/irqflags.h>
|
|
#include <linux/irqreturn.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/net.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/pci_ids.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/string.h>
|
|
#include <linux/tcp.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/types.h>
|
|
#include <linux/workqueue.h>
|
|
|
|
#include <net/checksum.h>
|
|
|
|
#include "atl1.h"
|
|
|
|
/* Temporary hack for merging atl1 and atl2 */
|
|
#include "atlx.c"
|
|
|
|
/*
|
|
* This is the only thing that needs to be changed to adjust the
|
|
* maximum number of ports that the driver can manage.
|
|
*/
|
|
#define ATL1_MAX_NIC 4
|
|
|
|
#define OPTION_UNSET -1
|
|
#define OPTION_DISABLED 0
|
|
#define OPTION_ENABLED 1
|
|
|
|
#define ATL1_PARAM_INIT { [0 ... ATL1_MAX_NIC] = OPTION_UNSET }
|
|
|
|
/*
|
|
* Interrupt Moderate Timer in units of 2 us
|
|
*
|
|
* Valid Range: 10-65535
|
|
*
|
|
* Default Value: 100 (200us)
|
|
*/
|
|
static int __devinitdata int_mod_timer[ATL1_MAX_NIC+1] = ATL1_PARAM_INIT;
|
|
static int num_int_mod_timer;
|
|
module_param_array_named(int_mod_timer, int_mod_timer, int,
|
|
&num_int_mod_timer, 0);
|
|
MODULE_PARM_DESC(int_mod_timer, "Interrupt moderator timer");
|
|
|
|
#define DEFAULT_INT_MOD_CNT 100 /* 200us */
|
|
#define MAX_INT_MOD_CNT 65000
|
|
#define MIN_INT_MOD_CNT 50
|
|
|
|
struct atl1_option {
|
|
enum { enable_option, range_option, list_option } type;
|
|
char *name;
|
|
char *err;
|
|
int def;
|
|
union {
|
|
struct { /* range_option info */
|
|
int min;
|
|
int max;
|
|
} r;
|
|
struct { /* list_option info */
|
|
int nr;
|
|
struct atl1_opt_list {
|
|
int i;
|
|
char *str;
|
|
} *p;
|
|
} l;
|
|
} arg;
|
|
};
|
|
|
|
static int __devinit atl1_validate_option(int *value, struct atl1_option *opt,
|
|
struct pci_dev *pdev)
|
|
{
|
|
if (*value == OPTION_UNSET) {
|
|
*value = opt->def;
|
|
return 0;
|
|
}
|
|
|
|
switch (opt->type) {
|
|
case enable_option:
|
|
switch (*value) {
|
|
case OPTION_ENABLED:
|
|
dev_info(&pdev->dev, "%s enabled\n", opt->name);
|
|
return 0;
|
|
case OPTION_DISABLED:
|
|
dev_info(&pdev->dev, "%s disabled\n", opt->name);
|
|
return 0;
|
|
}
|
|
break;
|
|
case range_option:
|
|
if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
|
|
dev_info(&pdev->dev, "%s set to %i\n", opt->name,
|
|
*value);
|
|
return 0;
|
|
}
|
|
break;
|
|
case list_option:{
|
|
int i;
|
|
struct atl1_opt_list *ent;
|
|
|
|
for (i = 0; i < opt->arg.l.nr; i++) {
|
|
ent = &opt->arg.l.p[i];
|
|
if (*value == ent->i) {
|
|
if (ent->str[0] != '\0')
|
|
dev_info(&pdev->dev, "%s\n",
|
|
ent->str);
|
|
return 0;
|
|
}
|
|
}
|
|
}
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
dev_info(&pdev->dev, "invalid %s specified (%i) %s\n",
|
|
opt->name, *value, opt->err);
|
|
*value = opt->def;
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
* atl1_check_options - Range Checking for Command Line Parameters
|
|
* @adapter: board private structure
|
|
*
|
|
* This routine checks all command line parameters for valid user
|
|
* input. If an invalid value is given, or if no user specified
|
|
* value exists, a default value is used. The final value is stored
|
|
* in a variable in the adapter structure.
|
|
*/
|
|
void __devinit atl1_check_options(struct atl1_adapter *adapter)
|
|
{
|
|
struct pci_dev *pdev = adapter->pdev;
|
|
int bd = adapter->bd_number;
|
|
if (bd >= ATL1_MAX_NIC) {
|
|
dev_notice(&pdev->dev, "no configuration for board#%i\n", bd);
|
|
dev_notice(&pdev->dev, "using defaults for all values\n");
|
|
}
|
|
{ /* Interrupt Moderate Timer */
|
|
struct atl1_option opt = {
|
|
.type = range_option,
|
|
.name = "Interrupt Moderator Timer",
|
|
.err = "using default of "
|
|
__MODULE_STRING(DEFAULT_INT_MOD_CNT),
|
|
.def = DEFAULT_INT_MOD_CNT,
|
|
.arg = {.r = {.min = MIN_INT_MOD_CNT,
|
|
.max = MAX_INT_MOD_CNT} }
|
|
};
|
|
int val;
|
|
if (num_int_mod_timer > bd) {
|
|
val = int_mod_timer[bd];
|
|
atl1_validate_option(&val, &opt, pdev);
|
|
adapter->imt = (u16) val;
|
|
} else
|
|
adapter->imt = (u16) (opt.def);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* atl1_pci_tbl - PCI Device ID Table
|
|
*/
|
|
static const struct pci_device_id atl1_pci_tbl[] = {
|
|
{PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L1)},
|
|
/* required last entry */
|
|
{0,}
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, atl1_pci_tbl);
|
|
|
|
static const u32 atl1_default_msg = NETIF_MSG_DRV | NETIF_MSG_PROBE |
|
|
NETIF_MSG_LINK | NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP;
|
|
|
|
static int debug = -1;
|
|
module_param(debug, int, 0);
|
|
MODULE_PARM_DESC(debug, "Message level (0=none,...,16=all)");
|
|
|
|
/*
|
|
* Reset the transmit and receive units; mask and clear all interrupts.
|
|
* hw - Struct containing variables accessed by shared code
|
|
* return : 0 or idle status (if error)
|
|
*/
|
|
static s32 atl1_reset_hw(struct atl1_hw *hw)
|
|
{
|
|
struct pci_dev *pdev = hw->back->pdev;
|
|
struct atl1_adapter *adapter = hw->back;
|
|
u32 icr;
|
|
int i;
|
|
|
|
/*
|
|
* Clear Interrupt mask to stop board from generating
|
|
* interrupts & Clear any pending interrupt events
|
|
*/
|
|
/*
|
|
* iowrite32(0, hw->hw_addr + REG_IMR);
|
|
* iowrite32(0xffffffff, hw->hw_addr + REG_ISR);
|
|
*/
|
|
|
|
/*
|
|
* Issue Soft Reset to the MAC. This will reset the chip's
|
|
* transmit, receive, DMA. It will not effect
|
|
* the current PCI configuration. The global reset bit is self-
|
|
* clearing, and should clear within a microsecond.
|
|
*/
|
|
iowrite32(MASTER_CTRL_SOFT_RST, hw->hw_addr + REG_MASTER_CTRL);
|
|
ioread32(hw->hw_addr + REG_MASTER_CTRL);
|
|
|
|
iowrite16(1, hw->hw_addr + REG_PHY_ENABLE);
|
|
ioread16(hw->hw_addr + REG_PHY_ENABLE);
|
|
|
|
/* delay about 1ms */
|
|
msleep(1);
|
|
|
|
/* Wait at least 10ms for All module to be Idle */
|
|
for (i = 0; i < 10; i++) {
|
|
icr = ioread32(hw->hw_addr + REG_IDLE_STATUS);
|
|
if (!icr)
|
|
break;
|
|
/* delay 1 ms */
|
|
msleep(1);
|
|
/* FIXME: still the right way to do this? */
|
|
cpu_relax();
|
|
}
|
|
|
|
if (icr) {
|
|
if (netif_msg_hw(adapter))
|
|
dev_dbg(&pdev->dev, "ICR = 0x%x\n", icr);
|
|
return icr;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* function about EEPROM
|
|
*
|
|
* check_eeprom_exist
|
|
* return 0 if eeprom exist
|
|
*/
|
|
static int atl1_check_eeprom_exist(struct atl1_hw *hw)
|
|
{
|
|
u32 value;
|
|
value = ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL);
|
|
if (value & SPI_FLASH_CTRL_EN_VPD) {
|
|
value &= ~SPI_FLASH_CTRL_EN_VPD;
|
|
iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL);
|
|
}
|
|
|
|
value = ioread16(hw->hw_addr + REG_PCIE_CAP_LIST);
|
|
return ((value & 0xFF00) == 0x6C00) ? 0 : 1;
|
|
}
|
|
|
|
static bool atl1_read_eeprom(struct atl1_hw *hw, u32 offset, u32 *p_value)
|
|
{
|
|
int i;
|
|
u32 control;
|
|
|
|
if (offset & 3)
|
|
/* address do not align */
|
|
return false;
|
|
|
|
iowrite32(0, hw->hw_addr + REG_VPD_DATA);
|
|
control = (offset & VPD_CAP_VPD_ADDR_MASK) << VPD_CAP_VPD_ADDR_SHIFT;
|
|
iowrite32(control, hw->hw_addr + REG_VPD_CAP);
|
|
ioread32(hw->hw_addr + REG_VPD_CAP);
|
|
|
|
for (i = 0; i < 10; i++) {
|
|
msleep(2);
|
|
control = ioread32(hw->hw_addr + REG_VPD_CAP);
|
|
if (control & VPD_CAP_VPD_FLAG)
|
|
break;
|
|
}
|
|
if (control & VPD_CAP_VPD_FLAG) {
|
|
*p_value = ioread32(hw->hw_addr + REG_VPD_DATA);
|
|
return true;
|
|
}
|
|
/* timeout */
|
|
return false;
|
|
}
|
|
|
|
/*
|
|
* Reads the value from a PHY register
|
|
* hw - Struct containing variables accessed by shared code
|
|
* reg_addr - address of the PHY register to read
|
|
*/
|
|
s32 atl1_read_phy_reg(struct atl1_hw *hw, u16 reg_addr, u16 *phy_data)
|
|
{
|
|
u32 val;
|
|
int i;
|
|
|
|
val = ((u32) (reg_addr & MDIO_REG_ADDR_MASK)) << MDIO_REG_ADDR_SHIFT |
|
|
MDIO_START | MDIO_SUP_PREAMBLE | MDIO_RW | MDIO_CLK_25_4 <<
|
|
MDIO_CLK_SEL_SHIFT;
|
|
iowrite32(val, hw->hw_addr + REG_MDIO_CTRL);
|
|
ioread32(hw->hw_addr + REG_MDIO_CTRL);
|
|
|
|
for (i = 0; i < MDIO_WAIT_TIMES; i++) {
|
|
udelay(2);
|
|
val = ioread32(hw->hw_addr + REG_MDIO_CTRL);
|
|
if (!(val & (MDIO_START | MDIO_BUSY)))
|
|
break;
|
|
}
|
|
if (!(val & (MDIO_START | MDIO_BUSY))) {
|
|
*phy_data = (u16) val;
|
|
return 0;
|
|
}
|
|
return ATLX_ERR_PHY;
|
|
}
|
|
|
|
#define CUSTOM_SPI_CS_SETUP 2
|
|
#define CUSTOM_SPI_CLK_HI 2
|
|
#define CUSTOM_SPI_CLK_LO 2
|
|
#define CUSTOM_SPI_CS_HOLD 2
|
|
#define CUSTOM_SPI_CS_HI 3
|
|
|
|
static bool atl1_spi_read(struct atl1_hw *hw, u32 addr, u32 *buf)
|
|
{
|
|
int i;
|
|
u32 value;
|
|
|
|
iowrite32(0, hw->hw_addr + REG_SPI_DATA);
|
|
iowrite32(addr, hw->hw_addr + REG_SPI_ADDR);
|
|
|
|
value = SPI_FLASH_CTRL_WAIT_READY |
|
|
(CUSTOM_SPI_CS_SETUP & SPI_FLASH_CTRL_CS_SETUP_MASK) <<
|
|
SPI_FLASH_CTRL_CS_SETUP_SHIFT | (CUSTOM_SPI_CLK_HI &
|
|
SPI_FLASH_CTRL_CLK_HI_MASK) <<
|
|
SPI_FLASH_CTRL_CLK_HI_SHIFT | (CUSTOM_SPI_CLK_LO &
|
|
SPI_FLASH_CTRL_CLK_LO_MASK) <<
|
|
SPI_FLASH_CTRL_CLK_LO_SHIFT | (CUSTOM_SPI_CS_HOLD &
|
|
SPI_FLASH_CTRL_CS_HOLD_MASK) <<
|
|
SPI_FLASH_CTRL_CS_HOLD_SHIFT | (CUSTOM_SPI_CS_HI &
|
|
SPI_FLASH_CTRL_CS_HI_MASK) <<
|
|
SPI_FLASH_CTRL_CS_HI_SHIFT | (1 & SPI_FLASH_CTRL_INS_MASK) <<
|
|
SPI_FLASH_CTRL_INS_SHIFT;
|
|
|
|
iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL);
|
|
|
|
value |= SPI_FLASH_CTRL_START;
|
|
iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL);
|
|
ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL);
|
|
|
|
for (i = 0; i < 10; i++) {
|
|
msleep(1);
|
|
value = ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL);
|
|
if (!(value & SPI_FLASH_CTRL_START))
|
|
break;
|
|
}
|
|
|
|
if (value & SPI_FLASH_CTRL_START)
|
|
return false;
|
|
|
|
*buf = ioread32(hw->hw_addr + REG_SPI_DATA);
|
|
|
|
return true;
|
|
}
|
|
|
|
/*
|
|
* get_permanent_address
|
|
* return 0 if get valid mac address,
|
|
*/
|
|
static int atl1_get_permanent_address(struct atl1_hw *hw)
|
|
{
|
|
u32 addr[2];
|
|
u32 i, control;
|
|
u16 reg;
|
|
u8 eth_addr[ETH_ALEN];
|
|
bool key_valid;
|
|
|
|
if (is_valid_ether_addr(hw->perm_mac_addr))
|
|
return 0;
|
|
|
|
/* init */
|
|
addr[0] = addr[1] = 0;
|
|
|
|
if (!atl1_check_eeprom_exist(hw)) {
|
|
reg = 0;
|
|
key_valid = false;
|
|
/* Read out all EEPROM content */
|
|
i = 0;
|
|
while (1) {
|
|
if (atl1_read_eeprom(hw, i + 0x100, &control)) {
|
|
if (key_valid) {
|
|
if (reg == REG_MAC_STA_ADDR)
|
|
addr[0] = control;
|
|
else if (reg == (REG_MAC_STA_ADDR + 4))
|
|
addr[1] = control;
|
|
key_valid = false;
|
|
} else if ((control & 0xff) == 0x5A) {
|
|
key_valid = true;
|
|
reg = (u16) (control >> 16);
|
|
} else
|
|
break;
|
|
} else
|
|
/* read error */
|
|
break;
|
|
i += 4;
|
|
}
|
|
|
|
*(u32 *) ð_addr[2] = swab32(addr[0]);
|
|
*(u16 *) ð_addr[0] = swab16(*(u16 *) &addr[1]);
|
|
if (is_valid_ether_addr(eth_addr)) {
|
|
memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
/* see if SPI FLAGS exist ? */
|
|
addr[0] = addr[1] = 0;
|
|
reg = 0;
|
|
key_valid = false;
|
|
i = 0;
|
|
while (1) {
|
|
if (atl1_spi_read(hw, i + 0x1f000, &control)) {
|
|
if (key_valid) {
|
|
if (reg == REG_MAC_STA_ADDR)
|
|
addr[0] = control;
|
|
else if (reg == (REG_MAC_STA_ADDR + 4))
|
|
addr[1] = control;
|
|
key_valid = false;
|
|
} else if ((control & 0xff) == 0x5A) {
|
|
key_valid = true;
|
|
reg = (u16) (control >> 16);
|
|
} else
|
|
/* data end */
|
|
break;
|
|
} else
|
|
/* read error */
|
|
break;
|
|
i += 4;
|
|
}
|
|
|
|
*(u32 *) ð_addr[2] = swab32(addr[0]);
|
|
*(u16 *) ð_addr[0] = swab16(*(u16 *) &addr[1]);
|
|
if (is_valid_ether_addr(eth_addr)) {
|
|
memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* On some motherboards, the MAC address is written by the
|
|
* BIOS directly to the MAC register during POST, and is
|
|
* not stored in eeprom. If all else thus far has failed
|
|
* to fetch the permanent MAC address, try reading it directly.
|
|
*/
|
|
addr[0] = ioread32(hw->hw_addr + REG_MAC_STA_ADDR);
|
|
addr[1] = ioread16(hw->hw_addr + (REG_MAC_STA_ADDR + 4));
|
|
*(u32 *) ð_addr[2] = swab32(addr[0]);
|
|
*(u16 *) ð_addr[0] = swab16(*(u16 *) &addr[1]);
|
|
if (is_valid_ether_addr(eth_addr)) {
|
|
memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN);
|
|
return 0;
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* Reads the adapter's MAC address from the EEPROM
|
|
* hw - Struct containing variables accessed by shared code
|
|
*/
|
|
s32 atl1_read_mac_addr(struct atl1_hw *hw)
|
|
{
|
|
u16 i;
|
|
|
|
if (atl1_get_permanent_address(hw))
|
|
random_ether_addr(hw->perm_mac_addr);
|
|
|
|
for (i = 0; i < ETH_ALEN; i++)
|
|
hw->mac_addr[i] = hw->perm_mac_addr[i];
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Hashes an address to determine its location in the multicast table
|
|
* hw - Struct containing variables accessed by shared code
|
|
* mc_addr - the multicast address to hash
|
|
*
|
|
* atl1_hash_mc_addr
|
|
* purpose
|
|
* set hash value for a multicast address
|
|
* hash calcu processing :
|
|
* 1. calcu 32bit CRC for multicast address
|
|
* 2. reverse crc with MSB to LSB
|
|
*/
|
|
u32 atl1_hash_mc_addr(struct atl1_hw *hw, u8 *mc_addr)
|
|
{
|
|
u32 crc32, value = 0;
|
|
int i;
|
|
|
|
crc32 = ether_crc_le(6, mc_addr);
|
|
for (i = 0; i < 32; i++)
|
|
value |= (((crc32 >> i) & 1) << (31 - i));
|
|
|
|
return value;
|
|
}
|
|
|
|
/*
|
|
* Sets the bit in the multicast table corresponding to the hash value.
|
|
* hw - Struct containing variables accessed by shared code
|
|
* hash_value - Multicast address hash value
|
|
*/
|
|
void atl1_hash_set(struct atl1_hw *hw, u32 hash_value)
|
|
{
|
|
u32 hash_bit, hash_reg;
|
|
u32 mta;
|
|
|
|
/*
|
|
* The HASH Table is a register array of 2 32-bit registers.
|
|
* It is treated like an array of 64 bits. We want to set
|
|
* bit BitArray[hash_value]. So we figure out what register
|
|
* the bit is in, read it, OR in the new bit, then write
|
|
* back the new value. The register is determined by the
|
|
* upper 7 bits of the hash value and the bit within that
|
|
* register are determined by the lower 5 bits of the value.
|
|
*/
|
|
hash_reg = (hash_value >> 31) & 0x1;
|
|
hash_bit = (hash_value >> 26) & 0x1F;
|
|
mta = ioread32((hw->hw_addr + REG_RX_HASH_TABLE) + (hash_reg << 2));
|
|
mta |= (1 << hash_bit);
|
|
iowrite32(mta, (hw->hw_addr + REG_RX_HASH_TABLE) + (hash_reg << 2));
|
|
}
|
|
|
|
/*
|
|
* Writes a value to a PHY register
|
|
* hw - Struct containing variables accessed by shared code
|
|
* reg_addr - address of the PHY register to write
|
|
* data - data to write to the PHY
|
|
*/
|
|
static s32 atl1_write_phy_reg(struct atl1_hw *hw, u32 reg_addr, u16 phy_data)
|
|
{
|
|
int i;
|
|
u32 val;
|
|
|
|
val = ((u32) (phy_data & MDIO_DATA_MASK)) << MDIO_DATA_SHIFT |
|
|
(reg_addr & MDIO_REG_ADDR_MASK) << MDIO_REG_ADDR_SHIFT |
|
|
MDIO_SUP_PREAMBLE |
|
|
MDIO_START | MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT;
|
|
iowrite32(val, hw->hw_addr + REG_MDIO_CTRL);
|
|
ioread32(hw->hw_addr + REG_MDIO_CTRL);
|
|
|
|
for (i = 0; i < MDIO_WAIT_TIMES; i++) {
|
|
udelay(2);
|
|
val = ioread32(hw->hw_addr + REG_MDIO_CTRL);
|
|
if (!(val & (MDIO_START | MDIO_BUSY)))
|
|
break;
|
|
}
|
|
|
|
if (!(val & (MDIO_START | MDIO_BUSY)))
|
|
return 0;
|
|
|
|
return ATLX_ERR_PHY;
|
|
}
|
|
|
|
/*
|
|
* Make L001's PHY out of Power Saving State (bug)
|
|
* hw - Struct containing variables accessed by shared code
|
|
* when power on, L001's PHY always on Power saving State
|
|
* (Gigabit Link forbidden)
|
|
*/
|
|
static s32 atl1_phy_leave_power_saving(struct atl1_hw *hw)
|
|
{
|
|
s32 ret;
|
|
ret = atl1_write_phy_reg(hw, 29, 0x0029);
|
|
if (ret)
|
|
return ret;
|
|
return atl1_write_phy_reg(hw, 30, 0);
|
|
}
|
|
|
|
/*
|
|
* Resets the PHY and make all config validate
|
|
* hw - Struct containing variables accessed by shared code
|
|
*
|
|
* Sets bit 15 and 12 of the MII Control regiser (for F001 bug)
|
|
*/
|
|
static s32 atl1_phy_reset(struct atl1_hw *hw)
|
|
{
|
|
struct pci_dev *pdev = hw->back->pdev;
|
|
struct atl1_adapter *adapter = hw->back;
|
|
s32 ret_val;
|
|
u16 phy_data;
|
|
|
|
if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
|
|
hw->media_type == MEDIA_TYPE_1000M_FULL)
|
|
phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN;
|
|
else {
|
|
switch (hw->media_type) {
|
|
case MEDIA_TYPE_100M_FULL:
|
|
phy_data =
|
|
MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 |
|
|
MII_CR_RESET;
|
|
break;
|
|
case MEDIA_TYPE_100M_HALF:
|
|
phy_data = MII_CR_SPEED_100 | MII_CR_RESET;
|
|
break;
|
|
case MEDIA_TYPE_10M_FULL:
|
|
phy_data =
|
|
MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET;
|
|
break;
|
|
default:
|
|
/* MEDIA_TYPE_10M_HALF: */
|
|
phy_data = MII_CR_SPEED_10 | MII_CR_RESET;
|
|
break;
|
|
}
|
|
}
|
|
|
|
ret_val = atl1_write_phy_reg(hw, MII_BMCR, phy_data);
|
|
if (ret_val) {
|
|
u32 val;
|
|
int i;
|
|
/* pcie serdes link may be down! */
|
|
if (netif_msg_hw(adapter))
|
|
dev_dbg(&pdev->dev, "pcie phy link down\n");
|
|
|
|
for (i = 0; i < 25; i++) {
|
|
msleep(1);
|
|
val = ioread32(hw->hw_addr + REG_MDIO_CTRL);
|
|
if (!(val & (MDIO_START | MDIO_BUSY)))
|
|
break;
|
|
}
|
|
|
|
if ((val & (MDIO_START | MDIO_BUSY)) != 0) {
|
|
if (netif_msg_hw(adapter))
|
|
dev_warn(&pdev->dev,
|
|
"pcie link down at least 25ms\n");
|
|
return ret_val;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Configures PHY autoneg and flow control advertisement settings
|
|
* hw - Struct containing variables accessed by shared code
|
|
*/
|
|
static s32 atl1_phy_setup_autoneg_adv(struct atl1_hw *hw)
|
|
{
|
|
s32 ret_val;
|
|
s16 mii_autoneg_adv_reg;
|
|
s16 mii_1000t_ctrl_reg;
|
|
|
|
/* Read the MII Auto-Neg Advertisement Register (Address 4). */
|
|
mii_autoneg_adv_reg = MII_AR_DEFAULT_CAP_MASK;
|
|
|
|
/* Read the MII 1000Base-T Control Register (Address 9). */
|
|
mii_1000t_ctrl_reg = MII_ATLX_CR_1000T_DEFAULT_CAP_MASK;
|
|
|
|
/*
|
|
* First we clear all the 10/100 mb speed bits in the Auto-Neg
|
|
* Advertisement Register (Address 4) and the 1000 mb speed bits in
|
|
* the 1000Base-T Control Register (Address 9).
|
|
*/
|
|
mii_autoneg_adv_reg &= ~MII_AR_SPEED_MASK;
|
|
mii_1000t_ctrl_reg &= ~MII_ATLX_CR_1000T_SPEED_MASK;
|
|
|
|
/*
|
|
* Need to parse media_type and set up
|
|
* the appropriate PHY registers.
|
|
*/
|
|
switch (hw->media_type) {
|
|
case MEDIA_TYPE_AUTO_SENSOR:
|
|
mii_autoneg_adv_reg |= (MII_AR_10T_HD_CAPS |
|
|
MII_AR_10T_FD_CAPS |
|
|
MII_AR_100TX_HD_CAPS |
|
|
MII_AR_100TX_FD_CAPS);
|
|
mii_1000t_ctrl_reg |= MII_ATLX_CR_1000T_FD_CAPS;
|
|
break;
|
|
|
|
case MEDIA_TYPE_1000M_FULL:
|
|
mii_1000t_ctrl_reg |= MII_ATLX_CR_1000T_FD_CAPS;
|
|
break;
|
|
|
|
case MEDIA_TYPE_100M_FULL:
|
|
mii_autoneg_adv_reg |= MII_AR_100TX_FD_CAPS;
|
|
break;
|
|
|
|
case MEDIA_TYPE_100M_HALF:
|
|
mii_autoneg_adv_reg |= MII_AR_100TX_HD_CAPS;
|
|
break;
|
|
|
|
case MEDIA_TYPE_10M_FULL:
|
|
mii_autoneg_adv_reg |= MII_AR_10T_FD_CAPS;
|
|
break;
|
|
|
|
default:
|
|
mii_autoneg_adv_reg |= MII_AR_10T_HD_CAPS;
|
|
break;
|
|
}
|
|
|
|
/* flow control fixed to enable all */
|
|
mii_autoneg_adv_reg |= (MII_AR_ASM_DIR | MII_AR_PAUSE);
|
|
|
|
hw->mii_autoneg_adv_reg = mii_autoneg_adv_reg;
|
|
hw->mii_1000t_ctrl_reg = mii_1000t_ctrl_reg;
|
|
|
|
ret_val = atl1_write_phy_reg(hw, MII_ADVERTISE, mii_autoneg_adv_reg);
|
|
if (ret_val)
|
|
return ret_val;
|
|
|
|
ret_val = atl1_write_phy_reg(hw, MII_ATLX_CR, mii_1000t_ctrl_reg);
|
|
if (ret_val)
|
|
return ret_val;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Configures link settings.
|
|
* hw - Struct containing variables accessed by shared code
|
|
* Assumes the hardware has previously been reset and the
|
|
* transmitter and receiver are not enabled.
|
|
*/
|
|
static s32 atl1_setup_link(struct atl1_hw *hw)
|
|
{
|
|
struct pci_dev *pdev = hw->back->pdev;
|
|
struct atl1_adapter *adapter = hw->back;
|
|
s32 ret_val;
|
|
|
|
/*
|
|
* Options:
|
|
* PHY will advertise value(s) parsed from
|
|
* autoneg_advertised and fc
|
|
* no matter what autoneg is , We will not wait link result.
|
|
*/
|
|
ret_val = atl1_phy_setup_autoneg_adv(hw);
|
|
if (ret_val) {
|
|
if (netif_msg_link(adapter))
|
|
dev_dbg(&pdev->dev,
|
|
"error setting up autonegotiation\n");
|
|
return ret_val;
|
|
}
|
|
/* SW.Reset , En-Auto-Neg if needed */
|
|
ret_val = atl1_phy_reset(hw);
|
|
if (ret_val) {
|
|
if (netif_msg_link(adapter))
|
|
dev_dbg(&pdev->dev, "error resetting phy\n");
|
|
return ret_val;
|
|
}
|
|
hw->phy_configured = true;
|
|
return ret_val;
|
|
}
|
|
|
|
static void atl1_init_flash_opcode(struct atl1_hw *hw)
|
|
{
|
|
if (hw->flash_vendor >= ARRAY_SIZE(flash_table))
|
|
/* Atmel */
|
|
hw->flash_vendor = 0;
|
|
|
|
/* Init OP table */
|
|
iowrite8(flash_table[hw->flash_vendor].cmd_program,
|
|
hw->hw_addr + REG_SPI_FLASH_OP_PROGRAM);
|
|
iowrite8(flash_table[hw->flash_vendor].cmd_sector_erase,
|
|
hw->hw_addr + REG_SPI_FLASH_OP_SC_ERASE);
|
|
iowrite8(flash_table[hw->flash_vendor].cmd_chip_erase,
|
|
hw->hw_addr + REG_SPI_FLASH_OP_CHIP_ERASE);
|
|
iowrite8(flash_table[hw->flash_vendor].cmd_rdid,
|
|
hw->hw_addr + REG_SPI_FLASH_OP_RDID);
|
|
iowrite8(flash_table[hw->flash_vendor].cmd_wren,
|
|
hw->hw_addr + REG_SPI_FLASH_OP_WREN);
|
|
iowrite8(flash_table[hw->flash_vendor].cmd_rdsr,
|
|
hw->hw_addr + REG_SPI_FLASH_OP_RDSR);
|
|
iowrite8(flash_table[hw->flash_vendor].cmd_wrsr,
|
|
hw->hw_addr + REG_SPI_FLASH_OP_WRSR);
|
|
iowrite8(flash_table[hw->flash_vendor].cmd_read,
|
|
hw->hw_addr + REG_SPI_FLASH_OP_READ);
|
|
}
|
|
|
|
/*
|
|
* Performs basic configuration of the adapter.
|
|
* hw - Struct containing variables accessed by shared code
|
|
* Assumes that the controller has previously been reset and is in a
|
|
* post-reset uninitialized state. Initializes multicast table,
|
|
* and Calls routines to setup link
|
|
* Leaves the transmit and receive units disabled and uninitialized.
|
|
*/
|
|
static s32 atl1_init_hw(struct atl1_hw *hw)
|
|
{
|
|
u32 ret_val = 0;
|
|
|
|
/* Zero out the Multicast HASH table */
|
|
iowrite32(0, hw->hw_addr + REG_RX_HASH_TABLE);
|
|
/* clear the old settings from the multicast hash table */
|
|
iowrite32(0, (hw->hw_addr + REG_RX_HASH_TABLE) + (1 << 2));
|
|
|
|
atl1_init_flash_opcode(hw);
|
|
|
|
if (!hw->phy_configured) {
|
|
/* enable GPHY LinkChange Interrrupt */
|
|
ret_val = atl1_write_phy_reg(hw, 18, 0xC00);
|
|
if (ret_val)
|
|
return ret_val;
|
|
/* make PHY out of power-saving state */
|
|
ret_val = atl1_phy_leave_power_saving(hw);
|
|
if (ret_val)
|
|
return ret_val;
|
|
/* Call a subroutine to configure the link */
|
|
ret_val = atl1_setup_link(hw);
|
|
}
|
|
return ret_val;
|
|
}
|
|
|
|
/*
|
|
* Detects the current speed and duplex settings of the hardware.
|
|
* hw - Struct containing variables accessed by shared code
|
|
* speed - Speed of the connection
|
|
* duplex - Duplex setting of the connection
|
|
*/
|
|
static s32 atl1_get_speed_and_duplex(struct atl1_hw *hw, u16 *speed, u16 *duplex)
|
|
{
|
|
struct pci_dev *pdev = hw->back->pdev;
|
|
struct atl1_adapter *adapter = hw->back;
|
|
s32 ret_val;
|
|
u16 phy_data;
|
|
|
|
/* ; --- Read PHY Specific Status Register (17) */
|
|
ret_val = atl1_read_phy_reg(hw, MII_ATLX_PSSR, &phy_data);
|
|
if (ret_val)
|
|
return ret_val;
|
|
|
|
if (!(phy_data & MII_ATLX_PSSR_SPD_DPLX_RESOLVED))
|
|
return ATLX_ERR_PHY_RES;
|
|
|
|
switch (phy_data & MII_ATLX_PSSR_SPEED) {
|
|
case MII_ATLX_PSSR_1000MBS:
|
|
*speed = SPEED_1000;
|
|
break;
|
|
case MII_ATLX_PSSR_100MBS:
|
|
*speed = SPEED_100;
|
|
break;
|
|
case MII_ATLX_PSSR_10MBS:
|
|
*speed = SPEED_10;
|
|
break;
|
|
default:
|
|
if (netif_msg_hw(adapter))
|
|
dev_dbg(&pdev->dev, "error getting speed\n");
|
|
return ATLX_ERR_PHY_SPEED;
|
|
break;
|
|
}
|
|
if (phy_data & MII_ATLX_PSSR_DPLX)
|
|
*duplex = FULL_DUPLEX;
|
|
else
|
|
*duplex = HALF_DUPLEX;
|
|
|
|
return 0;
|
|
}
|
|
|
|
void atl1_set_mac_addr(struct atl1_hw *hw)
|
|
{
|
|
u32 value;
|
|
/*
|
|
* 00-0B-6A-F6-00-DC
|
|
* 0: 6AF600DC 1: 000B
|
|
* low dword
|
|
*/
|
|
value = (((u32) hw->mac_addr[2]) << 24) |
|
|
(((u32) hw->mac_addr[3]) << 16) |
|
|
(((u32) hw->mac_addr[4]) << 8) | (((u32) hw->mac_addr[5]));
|
|
iowrite32(value, hw->hw_addr + REG_MAC_STA_ADDR);
|
|
/* high dword */
|
|
value = (((u32) hw->mac_addr[0]) << 8) | (((u32) hw->mac_addr[1]));
|
|
iowrite32(value, (hw->hw_addr + REG_MAC_STA_ADDR) + (1 << 2));
|
|
}
|
|
|
|
/*
|
|
* atl1_sw_init - Initialize general software structures (struct atl1_adapter)
|
|
* @adapter: board private structure to initialize
|
|
*
|
|
* atl1_sw_init initializes the Adapter private data structure.
|
|
* Fields are initialized based on PCI device information and
|
|
* OS network device settings (MTU size).
|
|
*/
|
|
static int __devinit atl1_sw_init(struct atl1_adapter *adapter)
|
|
{
|
|
struct atl1_hw *hw = &adapter->hw;
|
|
struct net_device *netdev = adapter->netdev;
|
|
|
|
hw->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN;
|
|
hw->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
|
|
|
|
adapter->wol = 0;
|
|
adapter->rx_buffer_len = (hw->max_frame_size + 7) & ~7;
|
|
adapter->ict = 50000; /* 100ms */
|
|
adapter->link_speed = SPEED_0; /* hardware init */
|
|
adapter->link_duplex = FULL_DUPLEX;
|
|
|
|
hw->phy_configured = false;
|
|
hw->preamble_len = 7;
|
|
hw->ipgt = 0x60;
|
|
hw->min_ifg = 0x50;
|
|
hw->ipgr1 = 0x40;
|
|
hw->ipgr2 = 0x60;
|
|
hw->max_retry = 0xf;
|
|
hw->lcol = 0x37;
|
|
hw->jam_ipg = 7;
|
|
hw->rfd_burst = 8;
|
|
hw->rrd_burst = 8;
|
|
hw->rfd_fetch_gap = 1;
|
|
hw->rx_jumbo_th = adapter->rx_buffer_len / 8;
|
|
hw->rx_jumbo_lkah = 1;
|
|
hw->rrd_ret_timer = 16;
|
|
hw->tpd_burst = 4;
|
|
hw->tpd_fetch_th = 16;
|
|
hw->txf_burst = 0x100;
|
|
hw->tx_jumbo_task_th = (hw->max_frame_size + 7) >> 3;
|
|
hw->tpd_fetch_gap = 1;
|
|
hw->rcb_value = atl1_rcb_64;
|
|
hw->dma_ord = atl1_dma_ord_enh;
|
|
hw->dmar_block = atl1_dma_req_256;
|
|
hw->dmaw_block = atl1_dma_req_256;
|
|
hw->cmb_rrd = 4;
|
|
hw->cmb_tpd = 4;
|
|
hw->cmb_rx_timer = 1; /* about 2us */
|
|
hw->cmb_tx_timer = 1; /* about 2us */
|
|
hw->smb_timer = 100000; /* about 200ms */
|
|
|
|
spin_lock_init(&adapter->lock);
|
|
spin_lock_init(&adapter->mb_lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mdio_read(struct net_device *netdev, int phy_id, int reg_num)
|
|
{
|
|
struct atl1_adapter *adapter = netdev_priv(netdev);
|
|
u16 result;
|
|
|
|
atl1_read_phy_reg(&adapter->hw, reg_num & 0x1f, &result);
|
|
|
|
return result;
|
|
}
|
|
|
|
static void mdio_write(struct net_device *netdev, int phy_id, int reg_num,
|
|
int val)
|
|
{
|
|
struct atl1_adapter *adapter = netdev_priv(netdev);
|
|
|
|
atl1_write_phy_reg(&adapter->hw, reg_num, val);
|
|
}
|
|
|
|
/*
|
|
* atl1_mii_ioctl -
|
|
* @netdev:
|
|
* @ifreq:
|
|
* @cmd:
|
|
*/
|
|
static int atl1_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
|
|
{
|
|
struct atl1_adapter *adapter = netdev_priv(netdev);
|
|
unsigned long flags;
|
|
int retval;
|
|
|
|
if (!netif_running(netdev))
|
|
return -EINVAL;
|
|
|
|
spin_lock_irqsave(&adapter->lock, flags);
|
|
retval = generic_mii_ioctl(&adapter->mii, if_mii(ifr), cmd, NULL);
|
|
spin_unlock_irqrestore(&adapter->lock, flags);
|
|
|
|
return retval;
|
|
}
|
|
|
|
/*
|
|
* atl1_setup_mem_resources - allocate Tx / RX descriptor resources
|
|
* @adapter: board private structure
|
|
*
|
|
* Return 0 on success, negative on failure
|
|
*/
|
|
static s32 atl1_setup_ring_resources(struct atl1_adapter *adapter)
|
|
{
|
|
struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;
|
|
struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring;
|
|
struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring;
|
|
struct atl1_ring_header *ring_header = &adapter->ring_header;
|
|
struct pci_dev *pdev = adapter->pdev;
|
|
int size;
|
|
u8 offset = 0;
|
|
|
|
size = sizeof(struct atl1_buffer) * (tpd_ring->count + rfd_ring->count);
|
|
tpd_ring->buffer_info = kzalloc(size, GFP_KERNEL);
|
|
if (unlikely(!tpd_ring->buffer_info)) {
|
|
if (netif_msg_drv(adapter))
|
|
dev_err(&pdev->dev, "kzalloc failed , size = D%d\n",
|
|
size);
|
|
goto err_nomem;
|
|
}
|
|
rfd_ring->buffer_info =
|
|
(struct atl1_buffer *)(tpd_ring->buffer_info + tpd_ring->count);
|
|
|
|
/*
|
|
* real ring DMA buffer
|
|
* each ring/block may need up to 8 bytes for alignment, hence the
|
|
* additional 40 bytes tacked onto the end.
|
|
*/
|
|
ring_header->size = size =
|
|
sizeof(struct tx_packet_desc) * tpd_ring->count
|
|
+ sizeof(struct rx_free_desc) * rfd_ring->count
|
|
+ sizeof(struct rx_return_desc) * rrd_ring->count
|
|
+ sizeof(struct coals_msg_block)
|
|
+ sizeof(struct stats_msg_block)
|
|
+ 40;
|
|
|
|
ring_header->desc = pci_alloc_consistent(pdev, ring_header->size,
|
|
&ring_header->dma);
|
|
if (unlikely(!ring_header->desc)) {
|
|
if (netif_msg_drv(adapter))
|
|
dev_err(&pdev->dev, "pci_alloc_consistent failed\n");
|
|
goto err_nomem;
|
|
}
|
|
|
|
memset(ring_header->desc, 0, ring_header->size);
|
|
|
|
/* init TPD ring */
|
|
tpd_ring->dma = ring_header->dma;
|
|
offset = (tpd_ring->dma & 0x7) ? (8 - (ring_header->dma & 0x7)) : 0;
|
|
tpd_ring->dma += offset;
|
|
tpd_ring->desc = (u8 *) ring_header->desc + offset;
|
|
tpd_ring->size = sizeof(struct tx_packet_desc) * tpd_ring->count;
|
|
|
|
/* init RFD ring */
|
|
rfd_ring->dma = tpd_ring->dma + tpd_ring->size;
|
|
offset = (rfd_ring->dma & 0x7) ? (8 - (rfd_ring->dma & 0x7)) : 0;
|
|
rfd_ring->dma += offset;
|
|
rfd_ring->desc = (u8 *) tpd_ring->desc + (tpd_ring->size + offset);
|
|
rfd_ring->size = sizeof(struct rx_free_desc) * rfd_ring->count;
|
|
|
|
|
|
/* init RRD ring */
|
|
rrd_ring->dma = rfd_ring->dma + rfd_ring->size;
|
|
offset = (rrd_ring->dma & 0x7) ? (8 - (rrd_ring->dma & 0x7)) : 0;
|
|
rrd_ring->dma += offset;
|
|
rrd_ring->desc = (u8 *) rfd_ring->desc + (rfd_ring->size + offset);
|
|
rrd_ring->size = sizeof(struct rx_return_desc) * rrd_ring->count;
|
|
|
|
|
|
/* init CMB */
|
|
adapter->cmb.dma = rrd_ring->dma + rrd_ring->size;
|
|
offset = (adapter->cmb.dma & 0x7) ? (8 - (adapter->cmb.dma & 0x7)) : 0;
|
|
adapter->cmb.dma += offset;
|
|
adapter->cmb.cmb = (struct coals_msg_block *)
|
|
((u8 *) rrd_ring->desc + (rrd_ring->size + offset));
|
|
|
|
/* init SMB */
|
|
adapter->smb.dma = adapter->cmb.dma + sizeof(struct coals_msg_block);
|
|
offset = (adapter->smb.dma & 0x7) ? (8 - (adapter->smb.dma & 0x7)) : 0;
|
|
adapter->smb.dma += offset;
|
|
adapter->smb.smb = (struct stats_msg_block *)
|
|
((u8 *) adapter->cmb.cmb +
|
|
(sizeof(struct coals_msg_block) + offset));
|
|
|
|
return 0;
|
|
|
|
err_nomem:
|
|
kfree(tpd_ring->buffer_info);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
static void atl1_init_ring_ptrs(struct atl1_adapter *adapter)
|
|
{
|
|
struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;
|
|
struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring;
|
|
struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring;
|
|
|
|
atomic_set(&tpd_ring->next_to_use, 0);
|
|
atomic_set(&tpd_ring->next_to_clean, 0);
|
|
|
|
rfd_ring->next_to_clean = 0;
|
|
atomic_set(&rfd_ring->next_to_use, 0);
|
|
|
|
rrd_ring->next_to_use = 0;
|
|
atomic_set(&rrd_ring->next_to_clean, 0);
|
|
}
|
|
|
|
/*
|
|
* atl1_clean_rx_ring - Free RFD Buffers
|
|
* @adapter: board private structure
|
|
*/
|
|
static void atl1_clean_rx_ring(struct atl1_adapter *adapter)
|
|
{
|
|
struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring;
|
|
struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring;
|
|
struct atl1_buffer *buffer_info;
|
|
struct pci_dev *pdev = adapter->pdev;
|
|
unsigned long size;
|
|
unsigned int i;
|
|
|
|
/* Free all the Rx ring sk_buffs */
|
|
for (i = 0; i < rfd_ring->count; i++) {
|
|
buffer_info = &rfd_ring->buffer_info[i];
|
|
if (buffer_info->dma) {
|
|
pci_unmap_page(pdev, buffer_info->dma,
|
|
buffer_info->length, PCI_DMA_FROMDEVICE);
|
|
buffer_info->dma = 0;
|
|
}
|
|
if (buffer_info->skb) {
|
|
dev_kfree_skb(buffer_info->skb);
|
|
buffer_info->skb = NULL;
|
|
}
|
|
}
|
|
|
|
size = sizeof(struct atl1_buffer) * rfd_ring->count;
|
|
memset(rfd_ring->buffer_info, 0, size);
|
|
|
|
/* Zero out the descriptor ring */
|
|
memset(rfd_ring->desc, 0, rfd_ring->size);
|
|
|
|
rfd_ring->next_to_clean = 0;
|
|
atomic_set(&rfd_ring->next_to_use, 0);
|
|
|
|
rrd_ring->next_to_use = 0;
|
|
atomic_set(&rrd_ring->next_to_clean, 0);
|
|
}
|
|
|
|
/*
|
|
* atl1_clean_tx_ring - Free Tx Buffers
|
|
* @adapter: board private structure
|
|
*/
|
|
static void atl1_clean_tx_ring(struct atl1_adapter *adapter)
|
|
{
|
|
struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;
|
|
struct atl1_buffer *buffer_info;
|
|
struct pci_dev *pdev = adapter->pdev;
|
|
unsigned long size;
|
|
unsigned int i;
|
|
|
|
/* Free all the Tx ring sk_buffs */
|
|
for (i = 0; i < tpd_ring->count; i++) {
|
|
buffer_info = &tpd_ring->buffer_info[i];
|
|
if (buffer_info->dma) {
|
|
pci_unmap_page(pdev, buffer_info->dma,
|
|
buffer_info->length, PCI_DMA_TODEVICE);
|
|
buffer_info->dma = 0;
|
|
}
|
|
}
|
|
|
|
for (i = 0; i < tpd_ring->count; i++) {
|
|
buffer_info = &tpd_ring->buffer_info[i];
|
|
if (buffer_info->skb) {
|
|
dev_kfree_skb_any(buffer_info->skb);
|
|
buffer_info->skb = NULL;
|
|
}
|
|
}
|
|
|
|
size = sizeof(struct atl1_buffer) * tpd_ring->count;
|
|
memset(tpd_ring->buffer_info, 0, size);
|
|
|
|
/* Zero out the descriptor ring */
|
|
memset(tpd_ring->desc, 0, tpd_ring->size);
|
|
|
|
atomic_set(&tpd_ring->next_to_use, 0);
|
|
atomic_set(&tpd_ring->next_to_clean, 0);
|
|
}
|
|
|
|
/*
|
|
* atl1_free_ring_resources - Free Tx / RX descriptor Resources
|
|
* @adapter: board private structure
|
|
*
|
|
* Free all transmit software resources
|
|
*/
|
|
static void atl1_free_ring_resources(struct atl1_adapter *adapter)
|
|
{
|
|
struct pci_dev *pdev = adapter->pdev;
|
|
struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;
|
|
struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring;
|
|
struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring;
|
|
struct atl1_ring_header *ring_header = &adapter->ring_header;
|
|
|
|
atl1_clean_tx_ring(adapter);
|
|
atl1_clean_rx_ring(adapter);
|
|
|
|
kfree(tpd_ring->buffer_info);
|
|
pci_free_consistent(pdev, ring_header->size, ring_header->desc,
|
|
ring_header->dma);
|
|
|
|
tpd_ring->buffer_info = NULL;
|
|
tpd_ring->desc = NULL;
|
|
tpd_ring->dma = 0;
|
|
|
|
rfd_ring->buffer_info = NULL;
|
|
rfd_ring->desc = NULL;
|
|
rfd_ring->dma = 0;
|
|
|
|
rrd_ring->desc = NULL;
|
|
rrd_ring->dma = 0;
|
|
}
|
|
|
|
static void atl1_setup_mac_ctrl(struct atl1_adapter *adapter)
|
|
{
|
|
u32 value;
|
|
struct atl1_hw *hw = &adapter->hw;
|
|
struct net_device *netdev = adapter->netdev;
|
|
/* Config MAC CTRL Register */
|
|
value = MAC_CTRL_TX_EN | MAC_CTRL_RX_EN;
|
|
/* duplex */
|
|
if (FULL_DUPLEX == adapter->link_duplex)
|
|
value |= MAC_CTRL_DUPLX;
|
|
/* speed */
|
|
value |= ((u32) ((SPEED_1000 == adapter->link_speed) ?
|
|
MAC_CTRL_SPEED_1000 : MAC_CTRL_SPEED_10_100) <<
|
|
MAC_CTRL_SPEED_SHIFT);
|
|
/* flow control */
|
|
value |= (MAC_CTRL_TX_FLOW | MAC_CTRL_RX_FLOW);
|
|
/* PAD & CRC */
|
|
value |= (MAC_CTRL_ADD_CRC | MAC_CTRL_PAD);
|
|
/* preamble length */
|
|
value |= (((u32) adapter->hw.preamble_len
|
|
& MAC_CTRL_PRMLEN_MASK) << MAC_CTRL_PRMLEN_SHIFT);
|
|
/* vlan */
|
|
if (adapter->vlgrp)
|
|
value |= MAC_CTRL_RMV_VLAN;
|
|
/* rx checksum
|
|
if (adapter->rx_csum)
|
|
value |= MAC_CTRL_RX_CHKSUM_EN;
|
|
*/
|
|
/* filter mode */
|
|
value |= MAC_CTRL_BC_EN;
|
|
if (netdev->flags & IFF_PROMISC)
|
|
value |= MAC_CTRL_PROMIS_EN;
|
|
else if (netdev->flags & IFF_ALLMULTI)
|
|
value |= MAC_CTRL_MC_ALL_EN;
|
|
/* value |= MAC_CTRL_LOOPBACK; */
|
|
iowrite32(value, hw->hw_addr + REG_MAC_CTRL);
|
|
}
|
|
|
|
static u32 atl1_check_link(struct atl1_adapter *adapter)
|
|
{
|
|
struct atl1_hw *hw = &adapter->hw;
|
|
struct net_device *netdev = adapter->netdev;
|
|
u32 ret_val;
|
|
u16 speed, duplex, phy_data;
|
|
int reconfig = 0;
|
|
|
|
/* MII_BMSR must read twice */
|
|
atl1_read_phy_reg(hw, MII_BMSR, &phy_data);
|
|
atl1_read_phy_reg(hw, MII_BMSR, &phy_data);
|
|
if (!(phy_data & BMSR_LSTATUS)) {
|
|
/* link down */
|
|
if (netif_carrier_ok(netdev)) {
|
|
/* old link state: Up */
|
|
if (netif_msg_link(adapter))
|
|
dev_info(&adapter->pdev->dev, "link is down\n");
|
|
adapter->link_speed = SPEED_0;
|
|
netif_carrier_off(netdev);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* Link Up */
|
|
ret_val = atl1_get_speed_and_duplex(hw, &speed, &duplex);
|
|
if (ret_val)
|
|
return ret_val;
|
|
|
|
switch (hw->media_type) {
|
|
case MEDIA_TYPE_1000M_FULL:
|
|
if (speed != SPEED_1000 || duplex != FULL_DUPLEX)
|
|
reconfig = 1;
|
|
break;
|
|
case MEDIA_TYPE_100M_FULL:
|
|
if (speed != SPEED_100 || duplex != FULL_DUPLEX)
|
|
reconfig = 1;
|
|
break;
|
|
case MEDIA_TYPE_100M_HALF:
|
|
if (speed != SPEED_100 || duplex != HALF_DUPLEX)
|
|
reconfig = 1;
|
|
break;
|
|
case MEDIA_TYPE_10M_FULL:
|
|
if (speed != SPEED_10 || duplex != FULL_DUPLEX)
|
|
reconfig = 1;
|
|
break;
|
|
case MEDIA_TYPE_10M_HALF:
|
|
if (speed != SPEED_10 || duplex != HALF_DUPLEX)
|
|
reconfig = 1;
|
|
break;
|
|
}
|
|
|
|
/* link result is our setting */
|
|
if (!reconfig) {
|
|
if (adapter->link_speed != speed
|
|
|| adapter->link_duplex != duplex) {
|
|
adapter->link_speed = speed;
|
|
adapter->link_duplex = duplex;
|
|
atl1_setup_mac_ctrl(adapter);
|
|
if (netif_msg_link(adapter))
|
|
dev_info(&adapter->pdev->dev,
|
|
"%s link is up %d Mbps %s\n",
|
|
netdev->name, adapter->link_speed,
|
|
adapter->link_duplex == FULL_DUPLEX ?
|
|
"full duplex" : "half duplex");
|
|
}
|
|
if (!netif_carrier_ok(netdev)) {
|
|
/* Link down -> Up */
|
|
netif_carrier_on(netdev);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* change original link status */
|
|
if (netif_carrier_ok(netdev)) {
|
|
adapter->link_speed = SPEED_0;
|
|
netif_carrier_off(netdev);
|
|
netif_stop_queue(netdev);
|
|
}
|
|
|
|
if (hw->media_type != MEDIA_TYPE_AUTO_SENSOR &&
|
|
hw->media_type != MEDIA_TYPE_1000M_FULL) {
|
|
switch (hw->media_type) {
|
|
case MEDIA_TYPE_100M_FULL:
|
|
phy_data = MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 |
|
|
MII_CR_RESET;
|
|
break;
|
|
case MEDIA_TYPE_100M_HALF:
|
|
phy_data = MII_CR_SPEED_100 | MII_CR_RESET;
|
|
break;
|
|
case MEDIA_TYPE_10M_FULL:
|
|
phy_data =
|
|
MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET;
|
|
break;
|
|
default:
|
|
/* MEDIA_TYPE_10M_HALF: */
|
|
phy_data = MII_CR_SPEED_10 | MII_CR_RESET;
|
|
break;
|
|
}
|
|
atl1_write_phy_reg(hw, MII_BMCR, phy_data);
|
|
return 0;
|
|
}
|
|
|
|
/* auto-neg, insert timer to re-config phy */
|
|
if (!adapter->phy_timer_pending) {
|
|
adapter->phy_timer_pending = true;
|
|
mod_timer(&adapter->phy_config_timer, jiffies + 3 * HZ);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void set_flow_ctrl_old(struct atl1_adapter *adapter)
|
|
{
|
|
u32 hi, lo, value;
|
|
|
|
/* RFD Flow Control */
|
|
value = adapter->rfd_ring.count;
|
|
hi = value / 16;
|
|
if (hi < 2)
|
|
hi = 2;
|
|
lo = value * 7 / 8;
|
|
|
|
value = ((hi & RXQ_RXF_PAUSE_TH_HI_MASK) << RXQ_RXF_PAUSE_TH_HI_SHIFT) |
|
|
((lo & RXQ_RXF_PAUSE_TH_LO_MASK) << RXQ_RXF_PAUSE_TH_LO_SHIFT);
|
|
iowrite32(value, adapter->hw.hw_addr + REG_RXQ_RXF_PAUSE_THRESH);
|
|
|
|
/* RRD Flow Control */
|
|
value = adapter->rrd_ring.count;
|
|
lo = value / 16;
|
|
hi = value * 7 / 8;
|
|
if (lo < 2)
|
|
lo = 2;
|
|
value = ((hi & RXQ_RRD_PAUSE_TH_HI_MASK) << RXQ_RRD_PAUSE_TH_HI_SHIFT) |
|
|
((lo & RXQ_RRD_PAUSE_TH_LO_MASK) << RXQ_RRD_PAUSE_TH_LO_SHIFT);
|
|
iowrite32(value, adapter->hw.hw_addr + REG_RXQ_RRD_PAUSE_THRESH);
|
|
}
|
|
|
|
static void set_flow_ctrl_new(struct atl1_hw *hw)
|
|
{
|
|
u32 hi, lo, value;
|
|
|
|
/* RXF Flow Control */
|
|
value = ioread32(hw->hw_addr + REG_SRAM_RXF_LEN);
|
|
lo = value / 16;
|
|
if (lo < 192)
|
|
lo = 192;
|
|
hi = value * 7 / 8;
|
|
if (hi < lo)
|
|
hi = lo + 16;
|
|
value = ((hi & RXQ_RXF_PAUSE_TH_HI_MASK) << RXQ_RXF_PAUSE_TH_HI_SHIFT) |
|
|
((lo & RXQ_RXF_PAUSE_TH_LO_MASK) << RXQ_RXF_PAUSE_TH_LO_SHIFT);
|
|
iowrite32(value, hw->hw_addr + REG_RXQ_RXF_PAUSE_THRESH);
|
|
|
|
/* RRD Flow Control */
|
|
value = ioread32(hw->hw_addr + REG_SRAM_RRD_LEN);
|
|
lo = value / 8;
|
|
hi = value * 7 / 8;
|
|
if (lo < 2)
|
|
lo = 2;
|
|
if (hi < lo)
|
|
hi = lo + 3;
|
|
value = ((hi & RXQ_RRD_PAUSE_TH_HI_MASK) << RXQ_RRD_PAUSE_TH_HI_SHIFT) |
|
|
((lo & RXQ_RRD_PAUSE_TH_LO_MASK) << RXQ_RRD_PAUSE_TH_LO_SHIFT);
|
|
iowrite32(value, hw->hw_addr + REG_RXQ_RRD_PAUSE_THRESH);
|
|
}
|
|
|
|
/*
|
|
* atl1_configure - Configure Transmit&Receive Unit after Reset
|
|
* @adapter: board private structure
|
|
*
|
|
* Configure the Tx /Rx unit of the MAC after a reset.
|
|
*/
|
|
static u32 atl1_configure(struct atl1_adapter *adapter)
|
|
{
|
|
struct atl1_hw *hw = &adapter->hw;
|
|
u32 value;
|
|
|
|
/* clear interrupt status */
|
|
iowrite32(0xffffffff, adapter->hw.hw_addr + REG_ISR);
|
|
|
|
/* set MAC Address */
|
|
value = (((u32) hw->mac_addr[2]) << 24) |
|
|
(((u32) hw->mac_addr[3]) << 16) |
|
|
(((u32) hw->mac_addr[4]) << 8) |
|
|
(((u32) hw->mac_addr[5]));
|
|
iowrite32(value, hw->hw_addr + REG_MAC_STA_ADDR);
|
|
value = (((u32) hw->mac_addr[0]) << 8) | (((u32) hw->mac_addr[1]));
|
|
iowrite32(value, hw->hw_addr + (REG_MAC_STA_ADDR + 4));
|
|
|
|
/* tx / rx ring */
|
|
|
|
/* HI base address */
|
|
iowrite32((u32) ((adapter->tpd_ring.dma & 0xffffffff00000000ULL) >> 32),
|
|
hw->hw_addr + REG_DESC_BASE_ADDR_HI);
|
|
/* LO base address */
|
|
iowrite32((u32) (adapter->rfd_ring.dma & 0x00000000ffffffffULL),
|
|
hw->hw_addr + REG_DESC_RFD_ADDR_LO);
|
|
iowrite32((u32) (adapter->rrd_ring.dma & 0x00000000ffffffffULL),
|
|
hw->hw_addr + REG_DESC_RRD_ADDR_LO);
|
|
iowrite32((u32) (adapter->tpd_ring.dma & 0x00000000ffffffffULL),
|
|
hw->hw_addr + REG_DESC_TPD_ADDR_LO);
|
|
iowrite32((u32) (adapter->cmb.dma & 0x00000000ffffffffULL),
|
|
hw->hw_addr + REG_DESC_CMB_ADDR_LO);
|
|
iowrite32((u32) (adapter->smb.dma & 0x00000000ffffffffULL),
|
|
hw->hw_addr + REG_DESC_SMB_ADDR_LO);
|
|
|
|
/* element count */
|
|
value = adapter->rrd_ring.count;
|
|
value <<= 16;
|
|
value += adapter->rfd_ring.count;
|
|
iowrite32(value, hw->hw_addr + REG_DESC_RFD_RRD_RING_SIZE);
|
|
iowrite32(adapter->tpd_ring.count, hw->hw_addr +
|
|
REG_DESC_TPD_RING_SIZE);
|
|
|
|
/* Load Ptr */
|
|
iowrite32(1, hw->hw_addr + REG_LOAD_PTR);
|
|
|
|
/* config Mailbox */
|
|
value = ((atomic_read(&adapter->tpd_ring.next_to_use)
|
|
& MB_TPD_PROD_INDX_MASK) << MB_TPD_PROD_INDX_SHIFT) |
|
|
((atomic_read(&adapter->rrd_ring.next_to_clean)
|
|
& MB_RRD_CONS_INDX_MASK) << MB_RRD_CONS_INDX_SHIFT) |
|
|
((atomic_read(&adapter->rfd_ring.next_to_use)
|
|
& MB_RFD_PROD_INDX_MASK) << MB_RFD_PROD_INDX_SHIFT);
|
|
iowrite32(value, hw->hw_addr + REG_MAILBOX);
|
|
|
|
/* config IPG/IFG */
|
|
value = (((u32) hw->ipgt & MAC_IPG_IFG_IPGT_MASK)
|
|
<< MAC_IPG_IFG_IPGT_SHIFT) |
|
|
(((u32) hw->min_ifg & MAC_IPG_IFG_MIFG_MASK)
|
|
<< MAC_IPG_IFG_MIFG_SHIFT) |
|
|
(((u32) hw->ipgr1 & MAC_IPG_IFG_IPGR1_MASK)
|
|
<< MAC_IPG_IFG_IPGR1_SHIFT) |
|
|
(((u32) hw->ipgr2 & MAC_IPG_IFG_IPGR2_MASK)
|
|
<< MAC_IPG_IFG_IPGR2_SHIFT);
|
|
iowrite32(value, hw->hw_addr + REG_MAC_IPG_IFG);
|
|
|
|
/* config Half-Duplex Control */
|
|
value = ((u32) hw->lcol & MAC_HALF_DUPLX_CTRL_LCOL_MASK) |
|
|
(((u32) hw->max_retry & MAC_HALF_DUPLX_CTRL_RETRY_MASK)
|
|
<< MAC_HALF_DUPLX_CTRL_RETRY_SHIFT) |
|
|
MAC_HALF_DUPLX_CTRL_EXC_DEF_EN |
|
|
(0xa << MAC_HALF_DUPLX_CTRL_ABEBT_SHIFT) |
|
|
(((u32) hw->jam_ipg & MAC_HALF_DUPLX_CTRL_JAMIPG_MASK)
|
|
<< MAC_HALF_DUPLX_CTRL_JAMIPG_SHIFT);
|
|
iowrite32(value, hw->hw_addr + REG_MAC_HALF_DUPLX_CTRL);
|
|
|
|
/* set Interrupt Moderator Timer */
|
|
iowrite16(adapter->imt, hw->hw_addr + REG_IRQ_MODU_TIMER_INIT);
|
|
iowrite32(MASTER_CTRL_ITIMER_EN, hw->hw_addr + REG_MASTER_CTRL);
|
|
|
|
/* set Interrupt Clear Timer */
|
|
iowrite16(adapter->ict, hw->hw_addr + REG_CMBDISDMA_TIMER);
|
|
|
|
/* set max frame size hw will accept */
|
|
iowrite32(hw->max_frame_size, hw->hw_addr + REG_MTU);
|
|
|
|
/* jumbo size & rrd retirement timer */
|
|
value = (((u32) hw->rx_jumbo_th & RXQ_JMBOSZ_TH_MASK)
|
|
<< RXQ_JMBOSZ_TH_SHIFT) |
|
|
(((u32) hw->rx_jumbo_lkah & RXQ_JMBO_LKAH_MASK)
|
|
<< RXQ_JMBO_LKAH_SHIFT) |
|
|
(((u32) hw->rrd_ret_timer & RXQ_RRD_TIMER_MASK)
|
|
<< RXQ_RRD_TIMER_SHIFT);
|
|
iowrite32(value, hw->hw_addr + REG_RXQ_JMBOSZ_RRDTIM);
|
|
|
|
/* Flow Control */
|
|
switch (hw->dev_rev) {
|
|
case 0x8001:
|
|
case 0x9001:
|
|
case 0x9002:
|
|
case 0x9003:
|
|
set_flow_ctrl_old(adapter);
|
|
break;
|
|
default:
|
|
set_flow_ctrl_new(hw);
|
|
break;
|
|
}
|
|
|
|
/* config TXQ */
|
|
value = (((u32) hw->tpd_burst & TXQ_CTRL_TPD_BURST_NUM_MASK)
|
|
<< TXQ_CTRL_TPD_BURST_NUM_SHIFT) |
|
|
(((u32) hw->txf_burst & TXQ_CTRL_TXF_BURST_NUM_MASK)
|
|
<< TXQ_CTRL_TXF_BURST_NUM_SHIFT) |
|
|
(((u32) hw->tpd_fetch_th & TXQ_CTRL_TPD_FETCH_TH_MASK)
|
|
<< TXQ_CTRL_TPD_FETCH_TH_SHIFT) | TXQ_CTRL_ENH_MODE |
|
|
TXQ_CTRL_EN;
|
|
iowrite32(value, hw->hw_addr + REG_TXQ_CTRL);
|
|
|
|
/* min tpd fetch gap & tx jumbo packet size threshold for taskoffload */
|
|
value = (((u32) hw->tx_jumbo_task_th & TX_JUMBO_TASK_TH_MASK)
|
|
<< TX_JUMBO_TASK_TH_SHIFT) |
|
|
(((u32) hw->tpd_fetch_gap & TX_TPD_MIN_IPG_MASK)
|
|
<< TX_TPD_MIN_IPG_SHIFT);
|
|
iowrite32(value, hw->hw_addr + REG_TX_JUMBO_TASK_TH_TPD_IPG);
|
|
|
|
/* config RXQ */
|
|
value = (((u32) hw->rfd_burst & RXQ_CTRL_RFD_BURST_NUM_MASK)
|
|
<< RXQ_CTRL_RFD_BURST_NUM_SHIFT) |
|
|
(((u32) hw->rrd_burst & RXQ_CTRL_RRD_BURST_THRESH_MASK)
|
|
<< RXQ_CTRL_RRD_BURST_THRESH_SHIFT) |
|
|
(((u32) hw->rfd_fetch_gap & RXQ_CTRL_RFD_PREF_MIN_IPG_MASK)
|
|
<< RXQ_CTRL_RFD_PREF_MIN_IPG_SHIFT) | RXQ_CTRL_CUT_THRU_EN |
|
|
RXQ_CTRL_EN;
|
|
iowrite32(value, hw->hw_addr + REG_RXQ_CTRL);
|
|
|
|
/* config DMA Engine */
|
|
value = ((((u32) hw->dmar_block) & DMA_CTRL_DMAR_BURST_LEN_MASK)
|
|
<< DMA_CTRL_DMAR_BURST_LEN_SHIFT) |
|
|
((((u32) hw->dmaw_block) & DMA_CTRL_DMAW_BURST_LEN_MASK)
|
|
<< DMA_CTRL_DMAW_BURST_LEN_SHIFT) | DMA_CTRL_DMAR_EN |
|
|
DMA_CTRL_DMAW_EN;
|
|
value |= (u32) hw->dma_ord;
|
|
if (atl1_rcb_128 == hw->rcb_value)
|
|
value |= DMA_CTRL_RCB_VALUE;
|
|
iowrite32(value, hw->hw_addr + REG_DMA_CTRL);
|
|
|
|
/* config CMB / SMB */
|
|
value = (hw->cmb_tpd > adapter->tpd_ring.count) ?
|
|
hw->cmb_tpd : adapter->tpd_ring.count;
|
|
value <<= 16;
|
|
value |= hw->cmb_rrd;
|
|
iowrite32(value, hw->hw_addr + REG_CMB_WRITE_TH);
|
|
value = hw->cmb_rx_timer | ((u32) hw->cmb_tx_timer << 16);
|
|
iowrite32(value, hw->hw_addr + REG_CMB_WRITE_TIMER);
|
|
iowrite32(hw->smb_timer, hw->hw_addr + REG_SMB_TIMER);
|
|
|
|
/* --- enable CMB / SMB */
|
|
value = CSMB_CTRL_CMB_EN | CSMB_CTRL_SMB_EN;
|
|
iowrite32(value, hw->hw_addr + REG_CSMB_CTRL);
|
|
|
|
value = ioread32(adapter->hw.hw_addr + REG_ISR);
|
|
if (unlikely((value & ISR_PHY_LINKDOWN) != 0))
|
|
value = 1; /* config failed */
|
|
else
|
|
value = 0;
|
|
|
|
/* clear all interrupt status */
|
|
iowrite32(0x3fffffff, adapter->hw.hw_addr + REG_ISR);
|
|
iowrite32(0, adapter->hw.hw_addr + REG_ISR);
|
|
return value;
|
|
}
|
|
|
|
/*
|
|
* atl1_pcie_patch - Patch for PCIE module
|
|
*/
|
|
static void atl1_pcie_patch(struct atl1_adapter *adapter)
|
|
{
|
|
u32 value;
|
|
|
|
/* much vendor magic here */
|
|
value = 0x6500;
|
|
iowrite32(value, adapter->hw.hw_addr + 0x12FC);
|
|
/* pcie flow control mode change */
|
|
value = ioread32(adapter->hw.hw_addr + 0x1008);
|
|
value |= 0x8000;
|
|
iowrite32(value, adapter->hw.hw_addr + 0x1008);
|
|
}
|
|
|
|
/*
|
|
* When ACPI resume on some VIA MotherBoard, the Interrupt Disable bit/0x400
|
|
* on PCI Command register is disable.
|
|
* The function enable this bit.
|
|
* Brackett, 2006/03/15
|
|
*/
|
|
static void atl1_via_workaround(struct atl1_adapter *adapter)
|
|
{
|
|
unsigned long value;
|
|
|
|
value = ioread16(adapter->hw.hw_addr + PCI_COMMAND);
|
|
if (value & PCI_COMMAND_INTX_DISABLE)
|
|
value &= ~PCI_COMMAND_INTX_DISABLE;
|
|
iowrite32(value, adapter->hw.hw_addr + PCI_COMMAND);
|
|
}
|
|
|
|
static void atl1_inc_smb(struct atl1_adapter *adapter)
|
|
{
|
|
struct stats_msg_block *smb = adapter->smb.smb;
|
|
|
|
/* Fill out the OS statistics structure */
|
|
adapter->soft_stats.rx_packets += smb->rx_ok;
|
|
adapter->soft_stats.tx_packets += smb->tx_ok;
|
|
adapter->soft_stats.rx_bytes += smb->rx_byte_cnt;
|
|
adapter->soft_stats.tx_bytes += smb->tx_byte_cnt;
|
|
adapter->soft_stats.multicast += smb->rx_mcast;
|
|
adapter->soft_stats.collisions += (smb->tx_1_col + smb->tx_2_col * 2 +
|
|
smb->tx_late_col + smb->tx_abort_col * adapter->hw.max_retry);
|
|
|
|
/* Rx Errors */
|
|
adapter->soft_stats.rx_errors += (smb->rx_frag + smb->rx_fcs_err +
|
|
smb->rx_len_err + smb->rx_sz_ov + smb->rx_rxf_ov +
|
|
smb->rx_rrd_ov + smb->rx_align_err);
|
|
adapter->soft_stats.rx_fifo_errors += smb->rx_rxf_ov;
|
|
adapter->soft_stats.rx_length_errors += smb->rx_len_err;
|
|
adapter->soft_stats.rx_crc_errors += smb->rx_fcs_err;
|
|
adapter->soft_stats.rx_frame_errors += smb->rx_align_err;
|
|
adapter->soft_stats.rx_missed_errors += (smb->rx_rrd_ov +
|
|
smb->rx_rxf_ov);
|
|
|
|
adapter->soft_stats.rx_pause += smb->rx_pause;
|
|
adapter->soft_stats.rx_rrd_ov += smb->rx_rrd_ov;
|
|
adapter->soft_stats.rx_trunc += smb->rx_sz_ov;
|
|
|
|
/* Tx Errors */
|
|
adapter->soft_stats.tx_errors += (smb->tx_late_col +
|
|
smb->tx_abort_col + smb->tx_underrun + smb->tx_trunc);
|
|
adapter->soft_stats.tx_fifo_errors += smb->tx_underrun;
|
|
adapter->soft_stats.tx_aborted_errors += smb->tx_abort_col;
|
|
adapter->soft_stats.tx_window_errors += smb->tx_late_col;
|
|
|
|
adapter->soft_stats.excecol += smb->tx_abort_col;
|
|
adapter->soft_stats.deffer += smb->tx_defer;
|
|
adapter->soft_stats.scc += smb->tx_1_col;
|
|
adapter->soft_stats.mcc += smb->tx_2_col;
|
|
adapter->soft_stats.latecol += smb->tx_late_col;
|
|
adapter->soft_stats.tx_underun += smb->tx_underrun;
|
|
adapter->soft_stats.tx_trunc += smb->tx_trunc;
|
|
adapter->soft_stats.tx_pause += smb->tx_pause;
|
|
|
|
adapter->net_stats.rx_packets = adapter->soft_stats.rx_packets;
|
|
adapter->net_stats.tx_packets = adapter->soft_stats.tx_packets;
|
|
adapter->net_stats.rx_bytes = adapter->soft_stats.rx_bytes;
|
|
adapter->net_stats.tx_bytes = adapter->soft_stats.tx_bytes;
|
|
adapter->net_stats.multicast = adapter->soft_stats.multicast;
|
|
adapter->net_stats.collisions = adapter->soft_stats.collisions;
|
|
adapter->net_stats.rx_errors = adapter->soft_stats.rx_errors;
|
|
adapter->net_stats.rx_over_errors =
|
|
adapter->soft_stats.rx_missed_errors;
|
|
adapter->net_stats.rx_length_errors =
|
|
adapter->soft_stats.rx_length_errors;
|
|
adapter->net_stats.rx_crc_errors = adapter->soft_stats.rx_crc_errors;
|
|
adapter->net_stats.rx_frame_errors =
|
|
adapter->soft_stats.rx_frame_errors;
|
|
adapter->net_stats.rx_fifo_errors = adapter->soft_stats.rx_fifo_errors;
|
|
adapter->net_stats.rx_missed_errors =
|
|
adapter->soft_stats.rx_missed_errors;
|
|
adapter->net_stats.tx_errors = adapter->soft_stats.tx_errors;
|
|
adapter->net_stats.tx_fifo_errors = adapter->soft_stats.tx_fifo_errors;
|
|
adapter->net_stats.tx_aborted_errors =
|
|
adapter->soft_stats.tx_aborted_errors;
|
|
adapter->net_stats.tx_window_errors =
|
|
adapter->soft_stats.tx_window_errors;
|
|
adapter->net_stats.tx_carrier_errors =
|
|
adapter->soft_stats.tx_carrier_errors;
|
|
}
|
|
|
|
static void atl1_update_mailbox(struct atl1_adapter *adapter)
|
|
{
|
|
unsigned long flags;
|
|
u32 tpd_next_to_use;
|
|
u32 rfd_next_to_use;
|
|
u32 rrd_next_to_clean;
|
|
u32 value;
|
|
|
|
spin_lock_irqsave(&adapter->mb_lock, flags);
|
|
|
|
tpd_next_to_use = atomic_read(&adapter->tpd_ring.next_to_use);
|
|
rfd_next_to_use = atomic_read(&adapter->rfd_ring.next_to_use);
|
|
rrd_next_to_clean = atomic_read(&adapter->rrd_ring.next_to_clean);
|
|
|
|
value = ((rfd_next_to_use & MB_RFD_PROD_INDX_MASK) <<
|
|
MB_RFD_PROD_INDX_SHIFT) |
|
|
((rrd_next_to_clean & MB_RRD_CONS_INDX_MASK) <<
|
|
MB_RRD_CONS_INDX_SHIFT) |
|
|
((tpd_next_to_use & MB_TPD_PROD_INDX_MASK) <<
|
|
MB_TPD_PROD_INDX_SHIFT);
|
|
iowrite32(value, adapter->hw.hw_addr + REG_MAILBOX);
|
|
|
|
spin_unlock_irqrestore(&adapter->mb_lock, flags);
|
|
}
|
|
|
|
static void atl1_clean_alloc_flag(struct atl1_adapter *adapter,
|
|
struct rx_return_desc *rrd, u16 offset)
|
|
{
|
|
struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring;
|
|
|
|
while (rfd_ring->next_to_clean != (rrd->buf_indx + offset)) {
|
|
rfd_ring->buffer_info[rfd_ring->next_to_clean].alloced = 0;
|
|
if (++rfd_ring->next_to_clean == rfd_ring->count) {
|
|
rfd_ring->next_to_clean = 0;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void atl1_update_rfd_index(struct atl1_adapter *adapter,
|
|
struct rx_return_desc *rrd)
|
|
{
|
|
u16 num_buf;
|
|
|
|
num_buf = (rrd->xsz.xsum_sz.pkt_size + adapter->rx_buffer_len - 1) /
|
|
adapter->rx_buffer_len;
|
|
if (rrd->num_buf == num_buf)
|
|
/* clean alloc flag for bad rrd */
|
|
atl1_clean_alloc_flag(adapter, rrd, num_buf);
|
|
}
|
|
|
|
static void atl1_rx_checksum(struct atl1_adapter *adapter,
|
|
struct rx_return_desc *rrd, struct sk_buff *skb)
|
|
{
|
|
struct pci_dev *pdev = adapter->pdev;
|
|
|
|
/*
|
|
* The L1 hardware contains a bug that erroneously sets the
|
|
* PACKET_FLAG_ERR and ERR_FLAG_L4_CHKSUM bits whenever a
|
|
* fragmented IP packet is received, even though the packet
|
|
* is perfectly valid and its checksum is correct. There's
|
|
* no way to distinguish between one of these good packets
|
|
* and a packet that actually contains a TCP/UDP checksum
|
|
* error, so all we can do is allow it to be handed up to
|
|
* the higher layers and let it be sorted out there.
|
|
*/
|
|
|
|
skb->ip_summed = CHECKSUM_NONE;
|
|
|
|
if (unlikely(rrd->pkt_flg & PACKET_FLAG_ERR)) {
|
|
if (rrd->err_flg & (ERR_FLAG_CRC | ERR_FLAG_TRUNC |
|
|
ERR_FLAG_CODE | ERR_FLAG_OV)) {
|
|
adapter->hw_csum_err++;
|
|
if (netif_msg_rx_err(adapter))
|
|
dev_printk(KERN_DEBUG, &pdev->dev,
|
|
"rx checksum error\n");
|
|
return;
|
|
}
|
|
}
|
|
|
|
/* not IPv4 */
|
|
if (!(rrd->pkt_flg & PACKET_FLAG_IPV4))
|
|
/* checksum is invalid, but it's not an IPv4 pkt, so ok */
|
|
return;
|
|
|
|
/* IPv4 packet */
|
|
if (likely(!(rrd->err_flg &
|
|
(ERR_FLAG_IP_CHKSUM | ERR_FLAG_L4_CHKSUM)))) {
|
|
skb->ip_summed = CHECKSUM_UNNECESSARY;
|
|
adapter->hw_csum_good++;
|
|
return;
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* atl1_alloc_rx_buffers - Replace used receive buffers
|
|
* @adapter: address of board private structure
|
|
*/
|
|
static u16 atl1_alloc_rx_buffers(struct atl1_adapter *adapter)
|
|
{
|
|
struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring;
|
|
struct pci_dev *pdev = adapter->pdev;
|
|
struct page *page;
|
|
unsigned long offset;
|
|
struct atl1_buffer *buffer_info, *next_info;
|
|
struct sk_buff *skb;
|
|
u16 num_alloc = 0;
|
|
u16 rfd_next_to_use, next_next;
|
|
struct rx_free_desc *rfd_desc;
|
|
|
|
next_next = rfd_next_to_use = atomic_read(&rfd_ring->next_to_use);
|
|
if (++next_next == rfd_ring->count)
|
|
next_next = 0;
|
|
buffer_info = &rfd_ring->buffer_info[rfd_next_to_use];
|
|
next_info = &rfd_ring->buffer_info[next_next];
|
|
|
|
while (!buffer_info->alloced && !next_info->alloced) {
|
|
if (buffer_info->skb) {
|
|
buffer_info->alloced = 1;
|
|
goto next;
|
|
}
|
|
|
|
rfd_desc = ATL1_RFD_DESC(rfd_ring, rfd_next_to_use);
|
|
|
|
skb = netdev_alloc_skb(adapter->netdev,
|
|
adapter->rx_buffer_len + NET_IP_ALIGN);
|
|
if (unlikely(!skb)) {
|
|
/* Better luck next round */
|
|
adapter->net_stats.rx_dropped++;
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* Make buffer alignment 2 beyond a 16 byte boundary
|
|
* this will result in a 16 byte aligned IP header after
|
|
* the 14 byte MAC header is removed
|
|
*/
|
|
skb_reserve(skb, NET_IP_ALIGN);
|
|
|
|
buffer_info->alloced = 1;
|
|
buffer_info->skb = skb;
|
|
buffer_info->length = (u16) adapter->rx_buffer_len;
|
|
page = virt_to_page(skb->data);
|
|
offset = (unsigned long)skb->data & ~PAGE_MASK;
|
|
buffer_info->dma = pci_map_page(pdev, page, offset,
|
|
adapter->rx_buffer_len,
|
|
PCI_DMA_FROMDEVICE);
|
|
rfd_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
|
|
rfd_desc->buf_len = cpu_to_le16(adapter->rx_buffer_len);
|
|
rfd_desc->coalese = 0;
|
|
|
|
next:
|
|
rfd_next_to_use = next_next;
|
|
if (unlikely(++next_next == rfd_ring->count))
|
|
next_next = 0;
|
|
|
|
buffer_info = &rfd_ring->buffer_info[rfd_next_to_use];
|
|
next_info = &rfd_ring->buffer_info[next_next];
|
|
num_alloc++;
|
|
}
|
|
|
|
if (num_alloc) {
|
|
/*
|
|
* Force memory writes to complete before letting h/w
|
|
* know there are new descriptors to fetch. (Only
|
|
* applicable for weak-ordered memory model archs,
|
|
* such as IA-64).
|
|
*/
|
|
wmb();
|
|
atomic_set(&rfd_ring->next_to_use, (int)rfd_next_to_use);
|
|
}
|
|
return num_alloc;
|
|
}
|
|
|
|
static void atl1_intr_rx(struct atl1_adapter *adapter)
|
|
{
|
|
int i, count;
|
|
u16 length;
|
|
u16 rrd_next_to_clean;
|
|
u32 value;
|
|
struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring;
|
|
struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring;
|
|
struct atl1_buffer *buffer_info;
|
|
struct rx_return_desc *rrd;
|
|
struct sk_buff *skb;
|
|
|
|
count = 0;
|
|
|
|
rrd_next_to_clean = atomic_read(&rrd_ring->next_to_clean);
|
|
|
|
while (1) {
|
|
rrd = ATL1_RRD_DESC(rrd_ring, rrd_next_to_clean);
|
|
i = 1;
|
|
if (likely(rrd->xsz.valid)) { /* packet valid */
|
|
chk_rrd:
|
|
/* check rrd status */
|
|
if (likely(rrd->num_buf == 1))
|
|
goto rrd_ok;
|
|
else if (netif_msg_rx_err(adapter)) {
|
|
dev_printk(KERN_DEBUG, &adapter->pdev->dev,
|
|
"unexpected RRD buffer count\n");
|
|
dev_printk(KERN_DEBUG, &adapter->pdev->dev,
|
|
"rx_buf_len = %d\n",
|
|
adapter->rx_buffer_len);
|
|
dev_printk(KERN_DEBUG, &adapter->pdev->dev,
|
|
"RRD num_buf = %d\n",
|
|
rrd->num_buf);
|
|
dev_printk(KERN_DEBUG, &adapter->pdev->dev,
|
|
"RRD pkt_len = %d\n",
|
|
rrd->xsz.xsum_sz.pkt_size);
|
|
dev_printk(KERN_DEBUG, &adapter->pdev->dev,
|
|
"RRD pkt_flg = 0x%08X\n",
|
|
rrd->pkt_flg);
|
|
dev_printk(KERN_DEBUG, &adapter->pdev->dev,
|
|
"RRD err_flg = 0x%08X\n",
|
|
rrd->err_flg);
|
|
dev_printk(KERN_DEBUG, &adapter->pdev->dev,
|
|
"RRD vlan_tag = 0x%08X\n",
|
|
rrd->vlan_tag);
|
|
}
|
|
|
|
/* rrd seems to be bad */
|
|
if (unlikely(i-- > 0)) {
|
|
/* rrd may not be DMAed completely */
|
|
udelay(1);
|
|
goto chk_rrd;
|
|
}
|
|
/* bad rrd */
|
|
if (netif_msg_rx_err(adapter))
|
|
dev_printk(KERN_DEBUG, &adapter->pdev->dev,
|
|
"bad RRD\n");
|
|
/* see if update RFD index */
|
|
if (rrd->num_buf > 1)
|
|
atl1_update_rfd_index(adapter, rrd);
|
|
|
|
/* update rrd */
|
|
rrd->xsz.valid = 0;
|
|
if (++rrd_next_to_clean == rrd_ring->count)
|
|
rrd_next_to_clean = 0;
|
|
count++;
|
|
continue;
|
|
} else { /* current rrd still not be updated */
|
|
|
|
break;
|
|
}
|
|
rrd_ok:
|
|
/* clean alloc flag for bad rrd */
|
|
atl1_clean_alloc_flag(adapter, rrd, 0);
|
|
|
|
buffer_info = &rfd_ring->buffer_info[rrd->buf_indx];
|
|
if (++rfd_ring->next_to_clean == rfd_ring->count)
|
|
rfd_ring->next_to_clean = 0;
|
|
|
|
/* update rrd next to clean */
|
|
if (++rrd_next_to_clean == rrd_ring->count)
|
|
rrd_next_to_clean = 0;
|
|
count++;
|
|
|
|
if (unlikely(rrd->pkt_flg & PACKET_FLAG_ERR)) {
|
|
if (!(rrd->err_flg &
|
|
(ERR_FLAG_IP_CHKSUM | ERR_FLAG_L4_CHKSUM
|
|
| ERR_FLAG_LEN))) {
|
|
/* packet error, don't need upstream */
|
|
buffer_info->alloced = 0;
|
|
rrd->xsz.valid = 0;
|
|
continue;
|
|
}
|
|
}
|
|
|
|
/* Good Receive */
|
|
pci_unmap_page(adapter->pdev, buffer_info->dma,
|
|
buffer_info->length, PCI_DMA_FROMDEVICE);
|
|
buffer_info->dma = 0;
|
|
skb = buffer_info->skb;
|
|
length = le16_to_cpu(rrd->xsz.xsum_sz.pkt_size);
|
|
|
|
skb_put(skb, length - ETH_FCS_LEN);
|
|
|
|
/* Receive Checksum Offload */
|
|
atl1_rx_checksum(adapter, rrd, skb);
|
|
skb->protocol = eth_type_trans(skb, adapter->netdev);
|
|
|
|
if (adapter->vlgrp && (rrd->pkt_flg & PACKET_FLAG_VLAN_INS)) {
|
|
u16 vlan_tag = (rrd->vlan_tag >> 4) |
|
|
((rrd->vlan_tag & 7) << 13) |
|
|
((rrd->vlan_tag & 8) << 9);
|
|
vlan_hwaccel_rx(skb, adapter->vlgrp, vlan_tag);
|
|
} else
|
|
netif_rx(skb);
|
|
|
|
/* let protocol layer free skb */
|
|
buffer_info->skb = NULL;
|
|
buffer_info->alloced = 0;
|
|
rrd->xsz.valid = 0;
|
|
|
|
adapter->netdev->last_rx = jiffies;
|
|
}
|
|
|
|
atomic_set(&rrd_ring->next_to_clean, rrd_next_to_clean);
|
|
|
|
atl1_alloc_rx_buffers(adapter);
|
|
|
|
/* update mailbox ? */
|
|
if (count) {
|
|
u32 tpd_next_to_use;
|
|
u32 rfd_next_to_use;
|
|
|
|
spin_lock(&adapter->mb_lock);
|
|
|
|
tpd_next_to_use = atomic_read(&adapter->tpd_ring.next_to_use);
|
|
rfd_next_to_use =
|
|
atomic_read(&adapter->rfd_ring.next_to_use);
|
|
rrd_next_to_clean =
|
|
atomic_read(&adapter->rrd_ring.next_to_clean);
|
|
value = ((rfd_next_to_use & MB_RFD_PROD_INDX_MASK) <<
|
|
MB_RFD_PROD_INDX_SHIFT) |
|
|
((rrd_next_to_clean & MB_RRD_CONS_INDX_MASK) <<
|
|
MB_RRD_CONS_INDX_SHIFT) |
|
|
((tpd_next_to_use & MB_TPD_PROD_INDX_MASK) <<
|
|
MB_TPD_PROD_INDX_SHIFT);
|
|
iowrite32(value, adapter->hw.hw_addr + REG_MAILBOX);
|
|
spin_unlock(&adapter->mb_lock);
|
|
}
|
|
}
|
|
|
|
static void atl1_intr_tx(struct atl1_adapter *adapter)
|
|
{
|
|
struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;
|
|
struct atl1_buffer *buffer_info;
|
|
u16 sw_tpd_next_to_clean;
|
|
u16 cmb_tpd_next_to_clean;
|
|
|
|
sw_tpd_next_to_clean = atomic_read(&tpd_ring->next_to_clean);
|
|
cmb_tpd_next_to_clean = le16_to_cpu(adapter->cmb.cmb->tpd_cons_idx);
|
|
|
|
while (cmb_tpd_next_to_clean != sw_tpd_next_to_clean) {
|
|
struct tx_packet_desc *tpd;
|
|
|
|
tpd = ATL1_TPD_DESC(tpd_ring, sw_tpd_next_to_clean);
|
|
buffer_info = &tpd_ring->buffer_info[sw_tpd_next_to_clean];
|
|
if (buffer_info->dma) {
|
|
pci_unmap_page(adapter->pdev, buffer_info->dma,
|
|
buffer_info->length, PCI_DMA_TODEVICE);
|
|
buffer_info->dma = 0;
|
|
}
|
|
|
|
if (buffer_info->skb) {
|
|
dev_kfree_skb_irq(buffer_info->skb);
|
|
buffer_info->skb = NULL;
|
|
}
|
|
|
|
if (++sw_tpd_next_to_clean == tpd_ring->count)
|
|
sw_tpd_next_to_clean = 0;
|
|
}
|
|
atomic_set(&tpd_ring->next_to_clean, sw_tpd_next_to_clean);
|
|
|
|
if (netif_queue_stopped(adapter->netdev)
|
|
&& netif_carrier_ok(adapter->netdev))
|
|
netif_wake_queue(adapter->netdev);
|
|
}
|
|
|
|
static u16 atl1_tpd_avail(struct atl1_tpd_ring *tpd_ring)
|
|
{
|
|
u16 next_to_clean = atomic_read(&tpd_ring->next_to_clean);
|
|
u16 next_to_use = atomic_read(&tpd_ring->next_to_use);
|
|
return ((next_to_clean > next_to_use) ?
|
|
next_to_clean - next_to_use - 1 :
|
|
tpd_ring->count + next_to_clean - next_to_use - 1);
|
|
}
|
|
|
|
static int atl1_tso(struct atl1_adapter *adapter, struct sk_buff *skb,
|
|
struct tx_packet_desc *ptpd)
|
|
{
|
|
u8 hdr_len, ip_off;
|
|
u32 real_len;
|
|
int err;
|
|
|
|
if (skb_shinfo(skb)->gso_size) {
|
|
if (skb_header_cloned(skb)) {
|
|
err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
|
|
if (unlikely(err))
|
|
return -1;
|
|
}
|
|
|
|
if (skb->protocol == htons(ETH_P_IP)) {
|
|
struct iphdr *iph = ip_hdr(skb);
|
|
|
|
real_len = (((unsigned char *)iph - skb->data) +
|
|
ntohs(iph->tot_len));
|
|
if (real_len < skb->len)
|
|
pskb_trim(skb, real_len);
|
|
hdr_len = (skb_transport_offset(skb) + tcp_hdrlen(skb));
|
|
if (skb->len == hdr_len) {
|
|
iph->check = 0;
|
|
tcp_hdr(skb)->check =
|
|
~csum_tcpudp_magic(iph->saddr,
|
|
iph->daddr, tcp_hdrlen(skb),
|
|
IPPROTO_TCP, 0);
|
|
ptpd->word3 |= (iph->ihl & TPD_IPHL_MASK) <<
|
|
TPD_IPHL_SHIFT;
|
|
ptpd->word3 |= ((tcp_hdrlen(skb) >> 2) &
|
|
TPD_TCPHDRLEN_MASK) <<
|
|
TPD_TCPHDRLEN_SHIFT;
|
|
ptpd->word3 |= 1 << TPD_IP_CSUM_SHIFT;
|
|
ptpd->word3 |= 1 << TPD_TCP_CSUM_SHIFT;
|
|
return 1;
|
|
}
|
|
|
|
iph->check = 0;
|
|
tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
|
|
iph->daddr, 0, IPPROTO_TCP, 0);
|
|
ip_off = (unsigned char *)iph -
|
|
(unsigned char *) skb_network_header(skb);
|
|
if (ip_off == 8) /* 802.3-SNAP frame */
|
|
ptpd->word3 |= 1 << TPD_ETHTYPE_SHIFT;
|
|
else if (ip_off != 0)
|
|
return -2;
|
|
|
|
ptpd->word3 |= (iph->ihl & TPD_IPHL_MASK) <<
|
|
TPD_IPHL_SHIFT;
|
|
ptpd->word3 |= ((tcp_hdrlen(skb) >> 2) &
|
|
TPD_TCPHDRLEN_MASK) << TPD_TCPHDRLEN_SHIFT;
|
|
ptpd->word3 |= (skb_shinfo(skb)->gso_size &
|
|
TPD_MSS_MASK) << TPD_MSS_SHIFT;
|
|
ptpd->word3 |= 1 << TPD_SEGMENT_EN_SHIFT;
|
|
return 3;
|
|
}
|
|
}
|
|
return false;
|
|
}
|
|
|
|
static int atl1_tx_csum(struct atl1_adapter *adapter, struct sk_buff *skb,
|
|
struct tx_packet_desc *ptpd)
|
|
{
|
|
u8 css, cso;
|
|
|
|
if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) {
|
|
css = (u8) (skb->csum_start - skb_headroom(skb));
|
|
cso = css + (u8) skb->csum_offset;
|
|
if (unlikely(css & 0x1)) {
|
|
/* L1 hardware requires an even number here */
|
|
if (netif_msg_tx_err(adapter))
|
|
dev_printk(KERN_DEBUG, &adapter->pdev->dev,
|
|
"payload offset not an even number\n");
|
|
return -1;
|
|
}
|
|
ptpd->word3 |= (css & TPD_PLOADOFFSET_MASK) <<
|
|
TPD_PLOADOFFSET_SHIFT;
|
|
ptpd->word3 |= (cso & TPD_CCSUMOFFSET_MASK) <<
|
|
TPD_CCSUMOFFSET_SHIFT;
|
|
ptpd->word3 |= 1 << TPD_CUST_CSUM_EN_SHIFT;
|
|
return true;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void atl1_tx_map(struct atl1_adapter *adapter, struct sk_buff *skb,
|
|
struct tx_packet_desc *ptpd)
|
|
{
|
|
struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;
|
|
struct atl1_buffer *buffer_info;
|
|
u16 buf_len = skb->len;
|
|
struct page *page;
|
|
unsigned long offset;
|
|
unsigned int nr_frags;
|
|
unsigned int f;
|
|
int retval;
|
|
u16 next_to_use;
|
|
u16 data_len;
|
|
u8 hdr_len;
|
|
|
|
buf_len -= skb->data_len;
|
|
nr_frags = skb_shinfo(skb)->nr_frags;
|
|
next_to_use = atomic_read(&tpd_ring->next_to_use);
|
|
buffer_info = &tpd_ring->buffer_info[next_to_use];
|
|
if (unlikely(buffer_info->skb))
|
|
BUG();
|
|
/* put skb in last TPD */
|
|
buffer_info->skb = NULL;
|
|
|
|
retval = (ptpd->word3 >> TPD_SEGMENT_EN_SHIFT) & TPD_SEGMENT_EN_MASK;
|
|
if (retval) {
|
|
/* TSO */
|
|
hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
|
|
buffer_info->length = hdr_len;
|
|
page = virt_to_page(skb->data);
|
|
offset = (unsigned long)skb->data & ~PAGE_MASK;
|
|
buffer_info->dma = pci_map_page(adapter->pdev, page,
|
|
offset, hdr_len,
|
|
PCI_DMA_TODEVICE);
|
|
|
|
if (++next_to_use == tpd_ring->count)
|
|
next_to_use = 0;
|
|
|
|
if (buf_len > hdr_len) {
|
|
int i, nseg;
|
|
|
|
data_len = buf_len - hdr_len;
|
|
nseg = (data_len + ATL1_MAX_TX_BUF_LEN - 1) /
|
|
ATL1_MAX_TX_BUF_LEN;
|
|
for (i = 0; i < nseg; i++) {
|
|
buffer_info =
|
|
&tpd_ring->buffer_info[next_to_use];
|
|
buffer_info->skb = NULL;
|
|
buffer_info->length =
|
|
(ATL1_MAX_TX_BUF_LEN >=
|
|
data_len) ? ATL1_MAX_TX_BUF_LEN : data_len;
|
|
data_len -= buffer_info->length;
|
|
page = virt_to_page(skb->data +
|
|
(hdr_len + i * ATL1_MAX_TX_BUF_LEN));
|
|
offset = (unsigned long)(skb->data +
|
|
(hdr_len + i * ATL1_MAX_TX_BUF_LEN)) &
|
|
~PAGE_MASK;
|
|
buffer_info->dma = pci_map_page(adapter->pdev,
|
|
page, offset, buffer_info->length,
|
|
PCI_DMA_TODEVICE);
|
|
if (++next_to_use == tpd_ring->count)
|
|
next_to_use = 0;
|
|
}
|
|
}
|
|
} else {
|
|
/* not TSO */
|
|
buffer_info->length = buf_len;
|
|
page = virt_to_page(skb->data);
|
|
offset = (unsigned long)skb->data & ~PAGE_MASK;
|
|
buffer_info->dma = pci_map_page(adapter->pdev, page,
|
|
offset, buf_len, PCI_DMA_TODEVICE);
|
|
if (++next_to_use == tpd_ring->count)
|
|
next_to_use = 0;
|
|
}
|
|
|
|
for (f = 0; f < nr_frags; f++) {
|
|
struct skb_frag_struct *frag;
|
|
u16 i, nseg;
|
|
|
|
frag = &skb_shinfo(skb)->frags[f];
|
|
buf_len = frag->size;
|
|
|
|
nseg = (buf_len + ATL1_MAX_TX_BUF_LEN - 1) /
|
|
ATL1_MAX_TX_BUF_LEN;
|
|
for (i = 0; i < nseg; i++) {
|
|
buffer_info = &tpd_ring->buffer_info[next_to_use];
|
|
if (unlikely(buffer_info->skb))
|
|
BUG();
|
|
buffer_info->skb = NULL;
|
|
buffer_info->length = (buf_len > ATL1_MAX_TX_BUF_LEN) ?
|
|
ATL1_MAX_TX_BUF_LEN : buf_len;
|
|
buf_len -= buffer_info->length;
|
|
buffer_info->dma = pci_map_page(adapter->pdev,
|
|
frag->page,
|
|
frag->page_offset + (i * ATL1_MAX_TX_BUF_LEN),
|
|
buffer_info->length, PCI_DMA_TODEVICE);
|
|
|
|
if (++next_to_use == tpd_ring->count)
|
|
next_to_use = 0;
|
|
}
|
|
}
|
|
|
|
/* last tpd's buffer-info */
|
|
buffer_info->skb = skb;
|
|
}
|
|
|
|
static void atl1_tx_queue(struct atl1_adapter *adapter, u16 count,
|
|
struct tx_packet_desc *ptpd)
|
|
{
|
|
struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;
|
|
struct atl1_buffer *buffer_info;
|
|
struct tx_packet_desc *tpd;
|
|
u16 j;
|
|
u32 val;
|
|
u16 next_to_use = (u16) atomic_read(&tpd_ring->next_to_use);
|
|
|
|
for (j = 0; j < count; j++) {
|
|
buffer_info = &tpd_ring->buffer_info[next_to_use];
|
|
tpd = ATL1_TPD_DESC(&adapter->tpd_ring, next_to_use);
|
|
if (tpd != ptpd)
|
|
memcpy(tpd, ptpd, sizeof(struct tx_packet_desc));
|
|
tpd->buffer_addr = cpu_to_le64(buffer_info->dma);
|
|
tpd->word2 &= ~(TPD_BUFLEN_MASK << TPD_BUFLEN_SHIFT);
|
|
tpd->word2 |= (cpu_to_le16(buffer_info->length) &
|
|
TPD_BUFLEN_MASK) << TPD_BUFLEN_SHIFT;
|
|
|
|
/*
|
|
* if this is the first packet in a TSO chain, set
|
|
* TPD_HDRFLAG, otherwise, clear it.
|
|
*/
|
|
val = (tpd->word3 >> TPD_SEGMENT_EN_SHIFT) &
|
|
TPD_SEGMENT_EN_MASK;
|
|
if (val) {
|
|
if (!j)
|
|
tpd->word3 |= 1 << TPD_HDRFLAG_SHIFT;
|
|
else
|
|
tpd->word3 &= ~(1 << TPD_HDRFLAG_SHIFT);
|
|
}
|
|
|
|
if (j == (count - 1))
|
|
tpd->word3 |= 1 << TPD_EOP_SHIFT;
|
|
|
|
if (++next_to_use == tpd_ring->count)
|
|
next_to_use = 0;
|
|
}
|
|
/*
|
|
* Force memory writes to complete before letting h/w
|
|
* know there are new descriptors to fetch. (Only
|
|
* applicable for weak-ordered memory model archs,
|
|
* such as IA-64).
|
|
*/
|
|
wmb();
|
|
|
|
atomic_set(&tpd_ring->next_to_use, next_to_use);
|
|
}
|
|
|
|
static int atl1_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
|
|
{
|
|
struct atl1_adapter *adapter = netdev_priv(netdev);
|
|
struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;
|
|
int len = skb->len;
|
|
int tso;
|
|
int count = 1;
|
|
int ret_val;
|
|
struct tx_packet_desc *ptpd;
|
|
u16 frag_size;
|
|
u16 vlan_tag;
|
|
unsigned int nr_frags = 0;
|
|
unsigned int mss = 0;
|
|
unsigned int f;
|
|
unsigned int proto_hdr_len;
|
|
|
|
len -= skb->data_len;
|
|
|
|
if (unlikely(skb->len <= 0)) {
|
|
dev_kfree_skb_any(skb);
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
nr_frags = skb_shinfo(skb)->nr_frags;
|
|
for (f = 0; f < nr_frags; f++) {
|
|
frag_size = skb_shinfo(skb)->frags[f].size;
|
|
if (frag_size)
|
|
count += (frag_size + ATL1_MAX_TX_BUF_LEN - 1) /
|
|
ATL1_MAX_TX_BUF_LEN;
|
|
}
|
|
|
|
mss = skb_shinfo(skb)->gso_size;
|
|
if (mss) {
|
|
if (skb->protocol == ntohs(ETH_P_IP)) {
|
|
proto_hdr_len = (skb_transport_offset(skb) +
|
|
tcp_hdrlen(skb));
|
|
if (unlikely(proto_hdr_len > len)) {
|
|
dev_kfree_skb_any(skb);
|
|
return NETDEV_TX_OK;
|
|
}
|
|
/* need additional TPD ? */
|
|
if (proto_hdr_len != len)
|
|
count += (len - proto_hdr_len +
|
|
ATL1_MAX_TX_BUF_LEN - 1) /
|
|
ATL1_MAX_TX_BUF_LEN;
|
|
}
|
|
}
|
|
|
|
if (atl1_tpd_avail(&adapter->tpd_ring) < count) {
|
|
/* not enough descriptors */
|
|
netif_stop_queue(netdev);
|
|
if (netif_msg_tx_queued(adapter))
|
|
dev_printk(KERN_DEBUG, &adapter->pdev->dev,
|
|
"tx busy\n");
|
|
return NETDEV_TX_BUSY;
|
|
}
|
|
|
|
ptpd = ATL1_TPD_DESC(tpd_ring,
|
|
(u16) atomic_read(&tpd_ring->next_to_use));
|
|
memset(ptpd, 0, sizeof(struct tx_packet_desc));
|
|
|
|
if (adapter->vlgrp && vlan_tx_tag_present(skb)) {
|
|
vlan_tag = vlan_tx_tag_get(skb);
|
|
vlan_tag = (vlan_tag << 4) | (vlan_tag >> 13) |
|
|
((vlan_tag >> 9) & 0x8);
|
|
ptpd->word3 |= 1 << TPD_INS_VL_TAG_SHIFT;
|
|
ptpd->word2 |= (vlan_tag & TPD_VLANTAG_MASK) <<
|
|
TPD_VLANTAG_SHIFT;
|
|
}
|
|
|
|
tso = atl1_tso(adapter, skb, ptpd);
|
|
if (tso < 0) {
|
|
dev_kfree_skb_any(skb);
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
if (!tso) {
|
|
ret_val = atl1_tx_csum(adapter, skb, ptpd);
|
|
if (ret_val < 0) {
|
|
dev_kfree_skb_any(skb);
|
|
return NETDEV_TX_OK;
|
|
}
|
|
}
|
|
|
|
atl1_tx_map(adapter, skb, ptpd);
|
|
atl1_tx_queue(adapter, count, ptpd);
|
|
atl1_update_mailbox(adapter);
|
|
mmiowb();
|
|
netdev->trans_start = jiffies;
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
/*
|
|
* atl1_intr - Interrupt Handler
|
|
* @irq: interrupt number
|
|
* @data: pointer to a network interface device structure
|
|
* @pt_regs: CPU registers structure
|
|
*/
|
|
static irqreturn_t atl1_intr(int irq, void *data)
|
|
{
|
|
struct atl1_adapter *adapter = netdev_priv(data);
|
|
u32 status;
|
|
int max_ints = 10;
|
|
|
|
status = adapter->cmb.cmb->int_stats;
|
|
if (!status)
|
|
return IRQ_NONE;
|
|
|
|
do {
|
|
/* clear CMB interrupt status at once */
|
|
adapter->cmb.cmb->int_stats = 0;
|
|
|
|
if (status & ISR_GPHY) /* clear phy status */
|
|
atlx_clear_phy_int(adapter);
|
|
|
|
/* clear ISR status, and Enable CMB DMA/Disable Interrupt */
|
|
iowrite32(status | ISR_DIS_INT, adapter->hw.hw_addr + REG_ISR);
|
|
|
|
/* check if SMB intr */
|
|
if (status & ISR_SMB)
|
|
atl1_inc_smb(adapter);
|
|
|
|
/* check if PCIE PHY Link down */
|
|
if (status & ISR_PHY_LINKDOWN) {
|
|
if (netif_msg_intr(adapter))
|
|
dev_printk(KERN_DEBUG, &adapter->pdev->dev,
|
|
"pcie phy link down %x\n", status);
|
|
if (netif_running(adapter->netdev)) { /* reset MAC */
|
|
iowrite32(0, adapter->hw.hw_addr + REG_IMR);
|
|
schedule_work(&adapter->pcie_dma_to_rst_task);
|
|
return IRQ_HANDLED;
|
|
}
|
|
}
|
|
|
|
/* check if DMA read/write error ? */
|
|
if (status & (ISR_DMAR_TO_RST | ISR_DMAW_TO_RST)) {
|
|
if (netif_msg_intr(adapter))
|
|
dev_printk(KERN_DEBUG, &adapter->pdev->dev,
|
|
"pcie DMA r/w error (status = 0x%x)\n",
|
|
status);
|
|
iowrite32(0, adapter->hw.hw_addr + REG_IMR);
|
|
schedule_work(&adapter->pcie_dma_to_rst_task);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* link event */
|
|
if (status & ISR_GPHY) {
|
|
adapter->soft_stats.tx_carrier_errors++;
|
|
atl1_check_for_link(adapter);
|
|
}
|
|
|
|
/* transmit event */
|
|
if (status & ISR_CMB_TX)
|
|
atl1_intr_tx(adapter);
|
|
|
|
/* rx exception */
|
|
if (unlikely(status & (ISR_RXF_OV | ISR_RFD_UNRUN |
|
|
ISR_RRD_OV | ISR_HOST_RFD_UNRUN |
|
|
ISR_HOST_RRD_OV | ISR_CMB_RX))) {
|
|
if (status & (ISR_RXF_OV | ISR_RFD_UNRUN |
|
|
ISR_RRD_OV | ISR_HOST_RFD_UNRUN |
|
|
ISR_HOST_RRD_OV))
|
|
if (netif_msg_intr(adapter))
|
|
dev_printk(KERN_DEBUG,
|
|
&adapter->pdev->dev,
|
|
"rx exception, ISR = 0x%x\n",
|
|
status);
|
|
atl1_intr_rx(adapter);
|
|
}
|
|
|
|
if (--max_ints < 0)
|
|
break;
|
|
|
|
} while ((status = adapter->cmb.cmb->int_stats));
|
|
|
|
/* re-enable Interrupt */
|
|
iowrite32(ISR_DIS_SMB | ISR_DIS_DMA, adapter->hw.hw_addr + REG_ISR);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/*
|
|
* atl1_watchdog - Timer Call-back
|
|
* @data: pointer to netdev cast into an unsigned long
|
|
*/
|
|
static void atl1_watchdog(unsigned long data)
|
|
{
|
|
struct atl1_adapter *adapter = (struct atl1_adapter *)data;
|
|
|
|
/* Reset the timer */
|
|
mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ);
|
|
}
|
|
|
|
/*
|
|
* atl1_phy_config - Timer Call-back
|
|
* @data: pointer to netdev cast into an unsigned long
|
|
*/
|
|
static void atl1_phy_config(unsigned long data)
|
|
{
|
|
struct atl1_adapter *adapter = (struct atl1_adapter *)data;
|
|
struct atl1_hw *hw = &adapter->hw;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&adapter->lock, flags);
|
|
adapter->phy_timer_pending = false;
|
|
atl1_write_phy_reg(hw, MII_ADVERTISE, hw->mii_autoneg_adv_reg);
|
|
atl1_write_phy_reg(hw, MII_ATLX_CR, hw->mii_1000t_ctrl_reg);
|
|
atl1_write_phy_reg(hw, MII_BMCR, MII_CR_RESET | MII_CR_AUTO_NEG_EN);
|
|
spin_unlock_irqrestore(&adapter->lock, flags);
|
|
}
|
|
|
|
/*
|
|
* Orphaned vendor comment left intact here:
|
|
* <vendor comment>
|
|
* If TPD Buffer size equal to 0, PCIE DMAR_TO_INT
|
|
* will assert. We do soft reset <0x1400=1> according
|
|
* with the SPEC. BUT, it seemes that PCIE or DMA
|
|
* state-machine will not be reset. DMAR_TO_INT will
|
|
* assert again and again.
|
|
* </vendor comment>
|
|
*/
|
|
|
|
static int atl1_reset(struct atl1_adapter *adapter)
|
|
{
|
|
int ret;
|
|
ret = atl1_reset_hw(&adapter->hw);
|
|
if (ret)
|
|
return ret;
|
|
return atl1_init_hw(&adapter->hw);
|
|
}
|
|
|
|
static s32 atl1_up(struct atl1_adapter *adapter)
|
|
{
|
|
struct net_device *netdev = adapter->netdev;
|
|
int err;
|
|
int irq_flags = IRQF_SAMPLE_RANDOM;
|
|
|
|
/* hardware has been reset, we need to reload some things */
|
|
atlx_set_multi(netdev);
|
|
atl1_init_ring_ptrs(adapter);
|
|
atlx_restore_vlan(adapter);
|
|
err = atl1_alloc_rx_buffers(adapter);
|
|
if (unlikely(!err))
|
|
/* no RX BUFFER allocated */
|
|
return -ENOMEM;
|
|
|
|
if (unlikely(atl1_configure(adapter))) {
|
|
err = -EIO;
|
|
goto err_up;
|
|
}
|
|
|
|
err = pci_enable_msi(adapter->pdev);
|
|
if (err) {
|
|
if (netif_msg_ifup(adapter))
|
|
dev_info(&adapter->pdev->dev,
|
|
"Unable to enable MSI: %d\n", err);
|
|
irq_flags |= IRQF_SHARED;
|
|
}
|
|
|
|
err = request_irq(adapter->pdev->irq, &atl1_intr, irq_flags,
|
|
netdev->name, netdev);
|
|
if (unlikely(err))
|
|
goto err_up;
|
|
|
|
mod_timer(&adapter->watchdog_timer, jiffies);
|
|
atlx_irq_enable(adapter);
|
|
atl1_check_link(adapter);
|
|
netif_start_queue(netdev);
|
|
return 0;
|
|
|
|
err_up:
|
|
pci_disable_msi(adapter->pdev);
|
|
/* free rx_buffers */
|
|
atl1_clean_rx_ring(adapter);
|
|
return err;
|
|
}
|
|
|
|
static void atl1_down(struct atl1_adapter *adapter)
|
|
{
|
|
struct net_device *netdev = adapter->netdev;
|
|
|
|
netif_stop_queue(netdev);
|
|
del_timer_sync(&adapter->watchdog_timer);
|
|
del_timer_sync(&adapter->phy_config_timer);
|
|
adapter->phy_timer_pending = false;
|
|
|
|
atlx_irq_disable(adapter);
|
|
free_irq(adapter->pdev->irq, netdev);
|
|
pci_disable_msi(adapter->pdev);
|
|
atl1_reset_hw(&adapter->hw);
|
|
adapter->cmb.cmb->int_stats = 0;
|
|
|
|
adapter->link_speed = SPEED_0;
|
|
adapter->link_duplex = -1;
|
|
netif_carrier_off(netdev);
|
|
|
|
atl1_clean_tx_ring(adapter);
|
|
atl1_clean_rx_ring(adapter);
|
|
}
|
|
|
|
static void atl1_tx_timeout_task(struct work_struct *work)
|
|
{
|
|
struct atl1_adapter *adapter =
|
|
container_of(work, struct atl1_adapter, tx_timeout_task);
|
|
struct net_device *netdev = adapter->netdev;
|
|
|
|
netif_device_detach(netdev);
|
|
atl1_down(adapter);
|
|
atl1_up(adapter);
|
|
netif_device_attach(netdev);
|
|
}
|
|
|
|
/*
|
|
* atl1_change_mtu - Change the Maximum Transfer Unit
|
|
* @netdev: network interface device structure
|
|
* @new_mtu: new value for maximum frame size
|
|
*
|
|
* Returns 0 on success, negative on failure
|
|
*/
|
|
static int atl1_change_mtu(struct net_device *netdev, int new_mtu)
|
|
{
|
|
struct atl1_adapter *adapter = netdev_priv(netdev);
|
|
int old_mtu = netdev->mtu;
|
|
int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN;
|
|
|
|
if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) ||
|
|
(max_frame > MAX_JUMBO_FRAME_SIZE)) {
|
|
if (netif_msg_link(adapter))
|
|
dev_warn(&adapter->pdev->dev, "invalid MTU setting\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
adapter->hw.max_frame_size = max_frame;
|
|
adapter->hw.tx_jumbo_task_th = (max_frame + 7) >> 3;
|
|
adapter->rx_buffer_len = (max_frame + 7) & ~7;
|
|
adapter->hw.rx_jumbo_th = adapter->rx_buffer_len / 8;
|
|
|
|
netdev->mtu = new_mtu;
|
|
if ((old_mtu != new_mtu) && netif_running(netdev)) {
|
|
atl1_down(adapter);
|
|
atl1_up(adapter);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* atl1_open - Called when a network interface is made active
|
|
* @netdev: network interface device structure
|
|
*
|
|
* Returns 0 on success, negative value on failure
|
|
*
|
|
* The open entry point is called when a network interface is made
|
|
* active by the system (IFF_UP). At this point all resources needed
|
|
* for transmit and receive operations are allocated, the interrupt
|
|
* handler is registered with the OS, the watchdog timer is started,
|
|
* and the stack is notified that the interface is ready.
|
|
*/
|
|
static int atl1_open(struct net_device *netdev)
|
|
{
|
|
struct atl1_adapter *adapter = netdev_priv(netdev);
|
|
int err;
|
|
|
|
netif_carrier_off(netdev);
|
|
|
|
/* allocate transmit descriptors */
|
|
err = atl1_setup_ring_resources(adapter);
|
|
if (err)
|
|
return err;
|
|
|
|
err = atl1_up(adapter);
|
|
if (err)
|
|
goto err_up;
|
|
|
|
return 0;
|
|
|
|
err_up:
|
|
atl1_reset(adapter);
|
|
return err;
|
|
}
|
|
|
|
/*
|
|
* atl1_close - Disables a network interface
|
|
* @netdev: network interface device structure
|
|
*
|
|
* Returns 0, this is not allowed to fail
|
|
*
|
|
* The close entry point is called when an interface is de-activated
|
|
* by the OS. The hardware is still under the drivers control, but
|
|
* needs to be disabled. A global MAC reset is issued to stop the
|
|
* hardware, and all transmit and receive resources are freed.
|
|
*/
|
|
static int atl1_close(struct net_device *netdev)
|
|
{
|
|
struct atl1_adapter *adapter = netdev_priv(netdev);
|
|
atl1_down(adapter);
|
|
atl1_free_ring_resources(adapter);
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int atl1_suspend(struct pci_dev *pdev, pm_message_t state)
|
|
{
|
|
struct net_device *netdev = pci_get_drvdata(pdev);
|
|
struct atl1_adapter *adapter = netdev_priv(netdev);
|
|
struct atl1_hw *hw = &adapter->hw;
|
|
u32 ctrl = 0;
|
|
u32 wufc = adapter->wol;
|
|
u32 val;
|
|
int retval;
|
|
u16 speed;
|
|
u16 duplex;
|
|
|
|
netif_device_detach(netdev);
|
|
if (netif_running(netdev))
|
|
atl1_down(adapter);
|
|
|
|
retval = pci_save_state(pdev);
|
|
if (retval)
|
|
return retval;
|
|
|
|
atl1_read_phy_reg(hw, MII_BMSR, (u16 *) & ctrl);
|
|
atl1_read_phy_reg(hw, MII_BMSR, (u16 *) & ctrl);
|
|
val = ctrl & BMSR_LSTATUS;
|
|
if (val)
|
|
wufc &= ~ATLX_WUFC_LNKC;
|
|
|
|
if (val && wufc) {
|
|
val = atl1_get_speed_and_duplex(hw, &speed, &duplex);
|
|
if (val) {
|
|
if (netif_msg_ifdown(adapter))
|
|
dev_printk(KERN_DEBUG, &pdev->dev,
|
|
"error getting speed/duplex\n");
|
|
goto disable_wol;
|
|
}
|
|
|
|
ctrl = 0;
|
|
|
|
/* enable magic packet WOL */
|
|
if (wufc & ATLX_WUFC_MAG)
|
|
ctrl |= (WOL_MAGIC_EN | WOL_MAGIC_PME_EN);
|
|
iowrite32(ctrl, hw->hw_addr + REG_WOL_CTRL);
|
|
ioread32(hw->hw_addr + REG_WOL_CTRL);
|
|
|
|
/* configure the mac */
|
|
ctrl = MAC_CTRL_RX_EN;
|
|
ctrl |= ((u32)((speed == SPEED_1000) ? MAC_CTRL_SPEED_1000 :
|
|
MAC_CTRL_SPEED_10_100) << MAC_CTRL_SPEED_SHIFT);
|
|
if (duplex == FULL_DUPLEX)
|
|
ctrl |= MAC_CTRL_DUPLX;
|
|
ctrl |= (((u32)adapter->hw.preamble_len &
|
|
MAC_CTRL_PRMLEN_MASK) << MAC_CTRL_PRMLEN_SHIFT);
|
|
if (adapter->vlgrp)
|
|
ctrl |= MAC_CTRL_RMV_VLAN;
|
|
if (wufc & ATLX_WUFC_MAG)
|
|
ctrl |= MAC_CTRL_BC_EN;
|
|
iowrite32(ctrl, hw->hw_addr + REG_MAC_CTRL);
|
|
ioread32(hw->hw_addr + REG_MAC_CTRL);
|
|
|
|
/* poke the PHY */
|
|
ctrl = ioread32(hw->hw_addr + REG_PCIE_PHYMISC);
|
|
ctrl |= PCIE_PHYMISC_FORCE_RCV_DET;
|
|
iowrite32(ctrl, hw->hw_addr + REG_PCIE_PHYMISC);
|
|
ioread32(hw->hw_addr + REG_PCIE_PHYMISC);
|
|
|
|
pci_enable_wake(pdev, pci_choose_state(pdev, state), 1);
|
|
goto exit;
|
|
}
|
|
|
|
if (!val && wufc) {
|
|
ctrl |= (WOL_LINK_CHG_EN | WOL_LINK_CHG_PME_EN);
|
|
iowrite32(ctrl, hw->hw_addr + REG_WOL_CTRL);
|
|
ioread32(hw->hw_addr + REG_WOL_CTRL);
|
|
iowrite32(0, hw->hw_addr + REG_MAC_CTRL);
|
|
ioread32(hw->hw_addr + REG_MAC_CTRL);
|
|
hw->phy_configured = false;
|
|
pci_enable_wake(pdev, pci_choose_state(pdev, state), 1);
|
|
goto exit;
|
|
}
|
|
|
|
disable_wol:
|
|
iowrite32(0, hw->hw_addr + REG_WOL_CTRL);
|
|
ioread32(hw->hw_addr + REG_WOL_CTRL);
|
|
ctrl = ioread32(hw->hw_addr + REG_PCIE_PHYMISC);
|
|
ctrl |= PCIE_PHYMISC_FORCE_RCV_DET;
|
|
iowrite32(ctrl, hw->hw_addr + REG_PCIE_PHYMISC);
|
|
ioread32(hw->hw_addr + REG_PCIE_PHYMISC);
|
|
hw->phy_configured = false;
|
|
pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);
|
|
exit:
|
|
if (netif_running(netdev))
|
|
pci_disable_msi(adapter->pdev);
|
|
pci_disable_device(pdev);
|
|
pci_set_power_state(pdev, pci_choose_state(pdev, state));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int atl1_resume(struct pci_dev *pdev)
|
|
{
|
|
struct net_device *netdev = pci_get_drvdata(pdev);
|
|
struct atl1_adapter *adapter = netdev_priv(netdev);
|
|
u32 err;
|
|
|
|
pci_set_power_state(pdev, PCI_D0);
|
|
pci_restore_state(pdev);
|
|
|
|
err = pci_enable_device(pdev);
|
|
if (err) {
|
|
if (netif_msg_ifup(adapter))
|
|
dev_printk(KERN_DEBUG, &pdev->dev,
|
|
"error enabling pci device\n");
|
|
return err;
|
|
}
|
|
|
|
pci_set_master(pdev);
|
|
iowrite32(0, adapter->hw.hw_addr + REG_WOL_CTRL);
|
|
pci_enable_wake(pdev, PCI_D3hot, 0);
|
|
pci_enable_wake(pdev, PCI_D3cold, 0);
|
|
|
|
atl1_reset_hw(&adapter->hw);
|
|
adapter->cmb.cmb->int_stats = 0;
|
|
|
|
if (netif_running(netdev))
|
|
atl1_up(adapter);
|
|
netif_device_attach(netdev);
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
#define atl1_suspend NULL
|
|
#define atl1_resume NULL
|
|
#endif
|
|
|
|
static void atl1_shutdown(struct pci_dev *pdev)
|
|
{
|
|
#ifdef CONFIG_PM
|
|
atl1_suspend(pdev, PMSG_SUSPEND);
|
|
#endif
|
|
}
|
|
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
static void atl1_poll_controller(struct net_device *netdev)
|
|
{
|
|
disable_irq(netdev->irq);
|
|
atl1_intr(netdev->irq, netdev);
|
|
enable_irq(netdev->irq);
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* atl1_probe - Device Initialization Routine
|
|
* @pdev: PCI device information struct
|
|
* @ent: entry in atl1_pci_tbl
|
|
*
|
|
* Returns 0 on success, negative on failure
|
|
*
|
|
* atl1_probe initializes an adapter identified by a pci_dev structure.
|
|
* The OS initialization, configuring of the adapter private structure,
|
|
* and a hardware reset occur.
|
|
*/
|
|
static int __devinit atl1_probe(struct pci_dev *pdev,
|
|
const struct pci_device_id *ent)
|
|
{
|
|
struct net_device *netdev;
|
|
struct atl1_adapter *adapter;
|
|
static int cards_found = 0;
|
|
int err;
|
|
|
|
err = pci_enable_device(pdev);
|
|
if (err)
|
|
return err;
|
|
|
|
/*
|
|
* The atl1 chip can DMA to 64-bit addresses, but it uses a single
|
|
* shared register for the high 32 bits, so only a single, aligned,
|
|
* 4 GB physical address range can be used at a time.
|
|
*
|
|
* Supporting 64-bit DMA on this hardware is more trouble than it's
|
|
* worth. It is far easier to limit to 32-bit DMA than update
|
|
* various kernel subsystems to support the mechanics required by a
|
|
* fixed-high-32-bit system.
|
|
*/
|
|
err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "no usable DMA configuration\n");
|
|
goto err_dma;
|
|
}
|
|
/*
|
|
* Mark all PCI regions associated with PCI device
|
|
* pdev as being reserved by owner atl1_driver_name
|
|
*/
|
|
err = pci_request_regions(pdev, ATLX_DRIVER_NAME);
|
|
if (err)
|
|
goto err_request_regions;
|
|
|
|
/*
|
|
* Enables bus-mastering on the device and calls
|
|
* pcibios_set_master to do the needed arch specific settings
|
|
*/
|
|
pci_set_master(pdev);
|
|
|
|
netdev = alloc_etherdev(sizeof(struct atl1_adapter));
|
|
if (!netdev) {
|
|
err = -ENOMEM;
|
|
goto err_alloc_etherdev;
|
|
}
|
|
SET_NETDEV_DEV(netdev, &pdev->dev);
|
|
|
|
pci_set_drvdata(pdev, netdev);
|
|
adapter = netdev_priv(netdev);
|
|
adapter->netdev = netdev;
|
|
adapter->pdev = pdev;
|
|
adapter->hw.back = adapter;
|
|
adapter->msg_enable = netif_msg_init(debug, atl1_default_msg);
|
|
|
|
adapter->hw.hw_addr = pci_iomap(pdev, 0, 0);
|
|
if (!adapter->hw.hw_addr) {
|
|
err = -EIO;
|
|
goto err_pci_iomap;
|
|
}
|
|
/* get device revision number */
|
|
adapter->hw.dev_rev = ioread16(adapter->hw.hw_addr +
|
|
(REG_MASTER_CTRL + 2));
|
|
if (netif_msg_probe(adapter))
|
|
dev_info(&pdev->dev, "version %s\n", ATLX_DRIVER_VERSION);
|
|
|
|
/* set default ring resource counts */
|
|
adapter->rfd_ring.count = adapter->rrd_ring.count = ATL1_DEFAULT_RFD;
|
|
adapter->tpd_ring.count = ATL1_DEFAULT_TPD;
|
|
|
|
adapter->mii.dev = netdev;
|
|
adapter->mii.mdio_read = mdio_read;
|
|
adapter->mii.mdio_write = mdio_write;
|
|
adapter->mii.phy_id_mask = 0x1f;
|
|
adapter->mii.reg_num_mask = 0x1f;
|
|
|
|
netdev->open = &atl1_open;
|
|
netdev->stop = &atl1_close;
|
|
netdev->hard_start_xmit = &atl1_xmit_frame;
|
|
netdev->get_stats = &atlx_get_stats;
|
|
netdev->set_multicast_list = &atlx_set_multi;
|
|
netdev->set_mac_address = &atl1_set_mac;
|
|
netdev->change_mtu = &atl1_change_mtu;
|
|
netdev->do_ioctl = &atlx_ioctl;
|
|
netdev->tx_timeout = &atlx_tx_timeout;
|
|
netdev->watchdog_timeo = 5 * HZ;
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
netdev->poll_controller = atl1_poll_controller;
|
|
#endif
|
|
netdev->vlan_rx_register = atlx_vlan_rx_register;
|
|
|
|
netdev->ethtool_ops = &atl1_ethtool_ops;
|
|
adapter->bd_number = cards_found;
|
|
|
|
/* setup the private structure */
|
|
err = atl1_sw_init(adapter);
|
|
if (err)
|
|
goto err_common;
|
|
|
|
netdev->features = NETIF_F_HW_CSUM;
|
|
netdev->features |= NETIF_F_SG;
|
|
netdev->features |= (NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX);
|
|
|
|
/*
|
|
* patch for some L1 of old version,
|
|
* the final version of L1 may not need these
|
|
* patches
|
|
*/
|
|
/* atl1_pcie_patch(adapter); */
|
|
|
|
/* really reset GPHY core */
|
|
iowrite16(0, adapter->hw.hw_addr + REG_PHY_ENABLE);
|
|
|
|
/*
|
|
* reset the controller to
|
|
* put the device in a known good starting state
|
|
*/
|
|
if (atl1_reset_hw(&adapter->hw)) {
|
|
err = -EIO;
|
|
goto err_common;
|
|
}
|
|
|
|
/* copy the MAC address out of the EEPROM */
|
|
atl1_read_mac_addr(&adapter->hw);
|
|
memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len);
|
|
|
|
if (!is_valid_ether_addr(netdev->dev_addr)) {
|
|
err = -EIO;
|
|
goto err_common;
|
|
}
|
|
|
|
atl1_check_options(adapter);
|
|
|
|
/* pre-init the MAC, and setup link */
|
|
err = atl1_init_hw(&adapter->hw);
|
|
if (err) {
|
|
err = -EIO;
|
|
goto err_common;
|
|
}
|
|
|
|
atl1_pcie_patch(adapter);
|
|
/* assume we have no link for now */
|
|
netif_carrier_off(netdev);
|
|
netif_stop_queue(netdev);
|
|
|
|
init_timer(&adapter->watchdog_timer);
|
|
adapter->watchdog_timer.function = &atl1_watchdog;
|
|
adapter->watchdog_timer.data = (unsigned long)adapter;
|
|
|
|
init_timer(&adapter->phy_config_timer);
|
|
adapter->phy_config_timer.function = &atl1_phy_config;
|
|
adapter->phy_config_timer.data = (unsigned long)adapter;
|
|
adapter->phy_timer_pending = false;
|
|
|
|
INIT_WORK(&adapter->tx_timeout_task, atl1_tx_timeout_task);
|
|
|
|
INIT_WORK(&adapter->link_chg_task, atlx_link_chg_task);
|
|
|
|
INIT_WORK(&adapter->pcie_dma_to_rst_task, atl1_tx_timeout_task);
|
|
|
|
err = register_netdev(netdev);
|
|
if (err)
|
|
goto err_common;
|
|
|
|
cards_found++;
|
|
atl1_via_workaround(adapter);
|
|
return 0;
|
|
|
|
err_common:
|
|
pci_iounmap(pdev, adapter->hw.hw_addr);
|
|
err_pci_iomap:
|
|
free_netdev(netdev);
|
|
err_alloc_etherdev:
|
|
pci_release_regions(pdev);
|
|
err_dma:
|
|
err_request_regions:
|
|
pci_disable_device(pdev);
|
|
return err;
|
|
}
|
|
|
|
/*
|
|
* atl1_remove - Device Removal Routine
|
|
* @pdev: PCI device information struct
|
|
*
|
|
* atl1_remove is called by the PCI subsystem to alert the driver
|
|
* that it should release a PCI device. The could be caused by a
|
|
* Hot-Plug event, or because the driver is going to be removed from
|
|
* memory.
|
|
*/
|
|
static void __devexit atl1_remove(struct pci_dev *pdev)
|
|
{
|
|
struct net_device *netdev = pci_get_drvdata(pdev);
|
|
struct atl1_adapter *adapter;
|
|
/* Device not available. Return. */
|
|
if (!netdev)
|
|
return;
|
|
|
|
adapter = netdev_priv(netdev);
|
|
|
|
/*
|
|
* Some atl1 boards lack persistent storage for their MAC, and get it
|
|
* from the BIOS during POST. If we've been messing with the MAC
|
|
* address, we need to save the permanent one.
|
|
*/
|
|
if (memcmp(adapter->hw.mac_addr, adapter->hw.perm_mac_addr, ETH_ALEN)) {
|
|
memcpy(adapter->hw.mac_addr, adapter->hw.perm_mac_addr,
|
|
ETH_ALEN);
|
|
atl1_set_mac_addr(&adapter->hw);
|
|
}
|
|
|
|
iowrite16(0, adapter->hw.hw_addr + REG_PHY_ENABLE);
|
|
unregister_netdev(netdev);
|
|
pci_iounmap(pdev, adapter->hw.hw_addr);
|
|
pci_release_regions(pdev);
|
|
free_netdev(netdev);
|
|
pci_disable_device(pdev);
|
|
}
|
|
|
|
static struct pci_driver atl1_driver = {
|
|
.name = ATLX_DRIVER_NAME,
|
|
.id_table = atl1_pci_tbl,
|
|
.probe = atl1_probe,
|
|
.remove = __devexit_p(atl1_remove),
|
|
.suspend = atl1_suspend,
|
|
.resume = atl1_resume,
|
|
.shutdown = atl1_shutdown
|
|
};
|
|
|
|
/*
|
|
* atl1_exit_module - Driver Exit Cleanup Routine
|
|
*
|
|
* atl1_exit_module is called just before the driver is removed
|
|
* from memory.
|
|
*/
|
|
static void __exit atl1_exit_module(void)
|
|
{
|
|
pci_unregister_driver(&atl1_driver);
|
|
}
|
|
|
|
/*
|
|
* atl1_init_module - Driver Registration Routine
|
|
*
|
|
* atl1_init_module is the first routine called when the driver is
|
|
* loaded. All it does is register with the PCI subsystem.
|
|
*/
|
|
static int __init atl1_init_module(void)
|
|
{
|
|
return pci_register_driver(&atl1_driver);
|
|
}
|
|
|
|
module_init(atl1_init_module);
|
|
module_exit(atl1_exit_module);
|
|
|
|
struct atl1_stats {
|
|
char stat_string[ETH_GSTRING_LEN];
|
|
int sizeof_stat;
|
|
int stat_offset;
|
|
};
|
|
|
|
#define ATL1_STAT(m) \
|
|
sizeof(((struct atl1_adapter *)0)->m), offsetof(struct atl1_adapter, m)
|
|
|
|
static struct atl1_stats atl1_gstrings_stats[] = {
|
|
{"rx_packets", ATL1_STAT(soft_stats.rx_packets)},
|
|
{"tx_packets", ATL1_STAT(soft_stats.tx_packets)},
|
|
{"rx_bytes", ATL1_STAT(soft_stats.rx_bytes)},
|
|
{"tx_bytes", ATL1_STAT(soft_stats.tx_bytes)},
|
|
{"rx_errors", ATL1_STAT(soft_stats.rx_errors)},
|
|
{"tx_errors", ATL1_STAT(soft_stats.tx_errors)},
|
|
{"rx_dropped", ATL1_STAT(net_stats.rx_dropped)},
|
|
{"tx_dropped", ATL1_STAT(net_stats.tx_dropped)},
|
|
{"multicast", ATL1_STAT(soft_stats.multicast)},
|
|
{"collisions", ATL1_STAT(soft_stats.collisions)},
|
|
{"rx_length_errors", ATL1_STAT(soft_stats.rx_length_errors)},
|
|
{"rx_over_errors", ATL1_STAT(soft_stats.rx_missed_errors)},
|
|
{"rx_crc_errors", ATL1_STAT(soft_stats.rx_crc_errors)},
|
|
{"rx_frame_errors", ATL1_STAT(soft_stats.rx_frame_errors)},
|
|
{"rx_fifo_errors", ATL1_STAT(soft_stats.rx_fifo_errors)},
|
|
{"rx_missed_errors", ATL1_STAT(soft_stats.rx_missed_errors)},
|
|
{"tx_aborted_errors", ATL1_STAT(soft_stats.tx_aborted_errors)},
|
|
{"tx_carrier_errors", ATL1_STAT(soft_stats.tx_carrier_errors)},
|
|
{"tx_fifo_errors", ATL1_STAT(soft_stats.tx_fifo_errors)},
|
|
{"tx_window_errors", ATL1_STAT(soft_stats.tx_window_errors)},
|
|
{"tx_abort_exce_coll", ATL1_STAT(soft_stats.excecol)},
|
|
{"tx_abort_late_coll", ATL1_STAT(soft_stats.latecol)},
|
|
{"tx_deferred_ok", ATL1_STAT(soft_stats.deffer)},
|
|
{"tx_single_coll_ok", ATL1_STAT(soft_stats.scc)},
|
|
{"tx_multi_coll_ok", ATL1_STAT(soft_stats.mcc)},
|
|
{"tx_underun", ATL1_STAT(soft_stats.tx_underun)},
|
|
{"tx_trunc", ATL1_STAT(soft_stats.tx_trunc)},
|
|
{"tx_pause", ATL1_STAT(soft_stats.tx_pause)},
|
|
{"rx_pause", ATL1_STAT(soft_stats.rx_pause)},
|
|
{"rx_rrd_ov", ATL1_STAT(soft_stats.rx_rrd_ov)},
|
|
{"rx_trunc", ATL1_STAT(soft_stats.rx_trunc)}
|
|
};
|
|
|
|
static void atl1_get_ethtool_stats(struct net_device *netdev,
|
|
struct ethtool_stats *stats, u64 *data)
|
|
{
|
|
struct atl1_adapter *adapter = netdev_priv(netdev);
|
|
int i;
|
|
char *p;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(atl1_gstrings_stats); i++) {
|
|
p = (char *)adapter+atl1_gstrings_stats[i].stat_offset;
|
|
data[i] = (atl1_gstrings_stats[i].sizeof_stat ==
|
|
sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
|
|
}
|
|
|
|
}
|
|
|
|
static int atl1_get_sset_count(struct net_device *netdev, int sset)
|
|
{
|
|
switch (sset) {
|
|
case ETH_SS_STATS:
|
|
return ARRAY_SIZE(atl1_gstrings_stats);
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static int atl1_get_settings(struct net_device *netdev,
|
|
struct ethtool_cmd *ecmd)
|
|
{
|
|
struct atl1_adapter *adapter = netdev_priv(netdev);
|
|
struct atl1_hw *hw = &adapter->hw;
|
|
|
|
ecmd->supported = (SUPPORTED_10baseT_Half |
|
|
SUPPORTED_10baseT_Full |
|
|
SUPPORTED_100baseT_Half |
|
|
SUPPORTED_100baseT_Full |
|
|
SUPPORTED_1000baseT_Full |
|
|
SUPPORTED_Autoneg | SUPPORTED_TP);
|
|
ecmd->advertising = ADVERTISED_TP;
|
|
if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
|
|
hw->media_type == MEDIA_TYPE_1000M_FULL) {
|
|
ecmd->advertising |= ADVERTISED_Autoneg;
|
|
if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR) {
|
|
ecmd->advertising |= ADVERTISED_Autoneg;
|
|
ecmd->advertising |=
|
|
(ADVERTISED_10baseT_Half |
|
|
ADVERTISED_10baseT_Full |
|
|
ADVERTISED_100baseT_Half |
|
|
ADVERTISED_100baseT_Full |
|
|
ADVERTISED_1000baseT_Full);
|
|
} else
|
|
ecmd->advertising |= (ADVERTISED_1000baseT_Full);
|
|
}
|
|
ecmd->port = PORT_TP;
|
|
ecmd->phy_address = 0;
|
|
ecmd->transceiver = XCVR_INTERNAL;
|
|
|
|
if (netif_carrier_ok(adapter->netdev)) {
|
|
u16 link_speed, link_duplex;
|
|
atl1_get_speed_and_duplex(hw, &link_speed, &link_duplex);
|
|
ecmd->speed = link_speed;
|
|
if (link_duplex == FULL_DUPLEX)
|
|
ecmd->duplex = DUPLEX_FULL;
|
|
else
|
|
ecmd->duplex = DUPLEX_HALF;
|
|
} else {
|
|
ecmd->speed = -1;
|
|
ecmd->duplex = -1;
|
|
}
|
|
if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
|
|
hw->media_type == MEDIA_TYPE_1000M_FULL)
|
|
ecmd->autoneg = AUTONEG_ENABLE;
|
|
else
|
|
ecmd->autoneg = AUTONEG_DISABLE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int atl1_set_settings(struct net_device *netdev,
|
|
struct ethtool_cmd *ecmd)
|
|
{
|
|
struct atl1_adapter *adapter = netdev_priv(netdev);
|
|
struct atl1_hw *hw = &adapter->hw;
|
|
u16 phy_data;
|
|
int ret_val = 0;
|
|
u16 old_media_type = hw->media_type;
|
|
|
|
if (netif_running(adapter->netdev)) {
|
|
if (netif_msg_link(adapter))
|
|
dev_dbg(&adapter->pdev->dev,
|
|
"ethtool shutting down adapter\n");
|
|
atl1_down(adapter);
|
|
}
|
|
|
|
if (ecmd->autoneg == AUTONEG_ENABLE)
|
|
hw->media_type = MEDIA_TYPE_AUTO_SENSOR;
|
|
else {
|
|
if (ecmd->speed == SPEED_1000) {
|
|
if (ecmd->duplex != DUPLEX_FULL) {
|
|
if (netif_msg_link(adapter))
|
|
dev_warn(&adapter->pdev->dev,
|
|
"1000M half is invalid\n");
|
|
ret_val = -EINVAL;
|
|
goto exit_sset;
|
|
}
|
|
hw->media_type = MEDIA_TYPE_1000M_FULL;
|
|
} else if (ecmd->speed == SPEED_100) {
|
|
if (ecmd->duplex == DUPLEX_FULL)
|
|
hw->media_type = MEDIA_TYPE_100M_FULL;
|
|
else
|
|
hw->media_type = MEDIA_TYPE_100M_HALF;
|
|
} else {
|
|
if (ecmd->duplex == DUPLEX_FULL)
|
|
hw->media_type = MEDIA_TYPE_10M_FULL;
|
|
else
|
|
hw->media_type = MEDIA_TYPE_10M_HALF;
|
|
}
|
|
}
|
|
switch (hw->media_type) {
|
|
case MEDIA_TYPE_AUTO_SENSOR:
|
|
ecmd->advertising =
|
|
ADVERTISED_10baseT_Half |
|
|
ADVERTISED_10baseT_Full |
|
|
ADVERTISED_100baseT_Half |
|
|
ADVERTISED_100baseT_Full |
|
|
ADVERTISED_1000baseT_Full |
|
|
ADVERTISED_Autoneg | ADVERTISED_TP;
|
|
break;
|
|
case MEDIA_TYPE_1000M_FULL:
|
|
ecmd->advertising =
|
|
ADVERTISED_1000baseT_Full |
|
|
ADVERTISED_Autoneg | ADVERTISED_TP;
|
|
break;
|
|
default:
|
|
ecmd->advertising = 0;
|
|
break;
|
|
}
|
|
if (atl1_phy_setup_autoneg_adv(hw)) {
|
|
ret_val = -EINVAL;
|
|
if (netif_msg_link(adapter))
|
|
dev_warn(&adapter->pdev->dev,
|
|
"invalid ethtool speed/duplex setting\n");
|
|
goto exit_sset;
|
|
}
|
|
if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
|
|
hw->media_type == MEDIA_TYPE_1000M_FULL)
|
|
phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN;
|
|
else {
|
|
switch (hw->media_type) {
|
|
case MEDIA_TYPE_100M_FULL:
|
|
phy_data =
|
|
MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 |
|
|
MII_CR_RESET;
|
|
break;
|
|
case MEDIA_TYPE_100M_HALF:
|
|
phy_data = MII_CR_SPEED_100 | MII_CR_RESET;
|
|
break;
|
|
case MEDIA_TYPE_10M_FULL:
|
|
phy_data =
|
|
MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET;
|
|
break;
|
|
default:
|
|
/* MEDIA_TYPE_10M_HALF: */
|
|
phy_data = MII_CR_SPEED_10 | MII_CR_RESET;
|
|
break;
|
|
}
|
|
}
|
|
atl1_write_phy_reg(hw, MII_BMCR, phy_data);
|
|
exit_sset:
|
|
if (ret_val)
|
|
hw->media_type = old_media_type;
|
|
|
|
if (netif_running(adapter->netdev)) {
|
|
if (netif_msg_link(adapter))
|
|
dev_dbg(&adapter->pdev->dev,
|
|
"ethtool starting adapter\n");
|
|
atl1_up(adapter);
|
|
} else if (!ret_val) {
|
|
if (netif_msg_link(adapter))
|
|
dev_dbg(&adapter->pdev->dev,
|
|
"ethtool resetting adapter\n");
|
|
atl1_reset(adapter);
|
|
}
|
|
return ret_val;
|
|
}
|
|
|
|
static void atl1_get_drvinfo(struct net_device *netdev,
|
|
struct ethtool_drvinfo *drvinfo)
|
|
{
|
|
struct atl1_adapter *adapter = netdev_priv(netdev);
|
|
|
|
strncpy(drvinfo->driver, ATLX_DRIVER_NAME, sizeof(drvinfo->driver));
|
|
strncpy(drvinfo->version, ATLX_DRIVER_VERSION,
|
|
sizeof(drvinfo->version));
|
|
strncpy(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version));
|
|
strncpy(drvinfo->bus_info, pci_name(adapter->pdev),
|
|
sizeof(drvinfo->bus_info));
|
|
drvinfo->eedump_len = ATL1_EEDUMP_LEN;
|
|
}
|
|
|
|
static void atl1_get_wol(struct net_device *netdev,
|
|
struct ethtool_wolinfo *wol)
|
|
{
|
|
struct atl1_adapter *adapter = netdev_priv(netdev);
|
|
|
|
wol->supported = WAKE_MAGIC;
|
|
wol->wolopts = 0;
|
|
if (adapter->wol & ATLX_WUFC_MAG)
|
|
wol->wolopts |= WAKE_MAGIC;
|
|
return;
|
|
}
|
|
|
|
static int atl1_set_wol(struct net_device *netdev,
|
|
struct ethtool_wolinfo *wol)
|
|
{
|
|
struct atl1_adapter *adapter = netdev_priv(netdev);
|
|
|
|
if (wol->wolopts & (WAKE_PHY | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST |
|
|
WAKE_ARP | WAKE_MAGICSECURE))
|
|
return -EOPNOTSUPP;
|
|
adapter->wol = 0;
|
|
if (wol->wolopts & WAKE_MAGIC)
|
|
adapter->wol |= ATLX_WUFC_MAG;
|
|
return 0;
|
|
}
|
|
|
|
static u32 atl1_get_msglevel(struct net_device *netdev)
|
|
{
|
|
struct atl1_adapter *adapter = netdev_priv(netdev);
|
|
return adapter->msg_enable;
|
|
}
|
|
|
|
static void atl1_set_msglevel(struct net_device *netdev, u32 value)
|
|
{
|
|
struct atl1_adapter *adapter = netdev_priv(netdev);
|
|
adapter->msg_enable = value;
|
|
}
|
|
|
|
static int atl1_get_regs_len(struct net_device *netdev)
|
|
{
|
|
return ATL1_REG_COUNT * sizeof(u32);
|
|
}
|
|
|
|
static void atl1_get_regs(struct net_device *netdev, struct ethtool_regs *regs,
|
|
void *p)
|
|
{
|
|
struct atl1_adapter *adapter = netdev_priv(netdev);
|
|
struct atl1_hw *hw = &adapter->hw;
|
|
unsigned int i;
|
|
u32 *regbuf = p;
|
|
|
|
for (i = 0; i < ATL1_REG_COUNT; i++) {
|
|
/*
|
|
* This switch statement avoids reserved regions
|
|
* of register space.
|
|
*/
|
|
switch (i) {
|
|
case 6 ... 9:
|
|
case 14:
|
|
case 29 ... 31:
|
|
case 34 ... 63:
|
|
case 75 ... 127:
|
|
case 136 ... 1023:
|
|
case 1027 ... 1087:
|
|
case 1091 ... 1151:
|
|
case 1194 ... 1195:
|
|
case 1200 ... 1201:
|
|
case 1206 ... 1213:
|
|
case 1216 ... 1279:
|
|
case 1290 ... 1311:
|
|
case 1323 ... 1343:
|
|
case 1358 ... 1359:
|
|
case 1368 ... 1375:
|
|
case 1378 ... 1383:
|
|
case 1388 ... 1391:
|
|
case 1393 ... 1395:
|
|
case 1402 ... 1403:
|
|
case 1410 ... 1471:
|
|
case 1522 ... 1535:
|
|
/* reserved region; don't read it */
|
|
regbuf[i] = 0;
|
|
break;
|
|
default:
|
|
/* unreserved region */
|
|
regbuf[i] = ioread32(hw->hw_addr + (i * sizeof(u32)));
|
|
}
|
|
}
|
|
}
|
|
|
|
static void atl1_get_ringparam(struct net_device *netdev,
|
|
struct ethtool_ringparam *ring)
|
|
{
|
|
struct atl1_adapter *adapter = netdev_priv(netdev);
|
|
struct atl1_tpd_ring *txdr = &adapter->tpd_ring;
|
|
struct atl1_rfd_ring *rxdr = &adapter->rfd_ring;
|
|
|
|
ring->rx_max_pending = ATL1_MAX_RFD;
|
|
ring->tx_max_pending = ATL1_MAX_TPD;
|
|
ring->rx_mini_max_pending = 0;
|
|
ring->rx_jumbo_max_pending = 0;
|
|
ring->rx_pending = rxdr->count;
|
|
ring->tx_pending = txdr->count;
|
|
ring->rx_mini_pending = 0;
|
|
ring->rx_jumbo_pending = 0;
|
|
}
|
|
|
|
static int atl1_set_ringparam(struct net_device *netdev,
|
|
struct ethtool_ringparam *ring)
|
|
{
|
|
struct atl1_adapter *adapter = netdev_priv(netdev);
|
|
struct atl1_tpd_ring *tpdr = &adapter->tpd_ring;
|
|
struct atl1_rrd_ring *rrdr = &adapter->rrd_ring;
|
|
struct atl1_rfd_ring *rfdr = &adapter->rfd_ring;
|
|
|
|
struct atl1_tpd_ring tpd_old, tpd_new;
|
|
struct atl1_rfd_ring rfd_old, rfd_new;
|
|
struct atl1_rrd_ring rrd_old, rrd_new;
|
|
struct atl1_ring_header rhdr_old, rhdr_new;
|
|
int err;
|
|
|
|
tpd_old = adapter->tpd_ring;
|
|
rfd_old = adapter->rfd_ring;
|
|
rrd_old = adapter->rrd_ring;
|
|
rhdr_old = adapter->ring_header;
|
|
|
|
if (netif_running(adapter->netdev))
|
|
atl1_down(adapter);
|
|
|
|
rfdr->count = (u16) max(ring->rx_pending, (u32) ATL1_MIN_RFD);
|
|
rfdr->count = rfdr->count > ATL1_MAX_RFD ? ATL1_MAX_RFD :
|
|
rfdr->count;
|
|
rfdr->count = (rfdr->count + 3) & ~3;
|
|
rrdr->count = rfdr->count;
|
|
|
|
tpdr->count = (u16) max(ring->tx_pending, (u32) ATL1_MIN_TPD);
|
|
tpdr->count = tpdr->count > ATL1_MAX_TPD ? ATL1_MAX_TPD :
|
|
tpdr->count;
|
|
tpdr->count = (tpdr->count + 3) & ~3;
|
|
|
|
if (netif_running(adapter->netdev)) {
|
|
/* try to get new resources before deleting old */
|
|
err = atl1_setup_ring_resources(adapter);
|
|
if (err)
|
|
goto err_setup_ring;
|
|
|
|
/*
|
|
* save the new, restore the old in order to free it,
|
|
* then restore the new back again
|
|
*/
|
|
|
|
rfd_new = adapter->rfd_ring;
|
|
rrd_new = adapter->rrd_ring;
|
|
tpd_new = adapter->tpd_ring;
|
|
rhdr_new = adapter->ring_header;
|
|
adapter->rfd_ring = rfd_old;
|
|
adapter->rrd_ring = rrd_old;
|
|
adapter->tpd_ring = tpd_old;
|
|
adapter->ring_header = rhdr_old;
|
|
atl1_free_ring_resources(adapter);
|
|
adapter->rfd_ring = rfd_new;
|
|
adapter->rrd_ring = rrd_new;
|
|
adapter->tpd_ring = tpd_new;
|
|
adapter->ring_header = rhdr_new;
|
|
|
|
err = atl1_up(adapter);
|
|
if (err)
|
|
return err;
|
|
}
|
|
return 0;
|
|
|
|
err_setup_ring:
|
|
adapter->rfd_ring = rfd_old;
|
|
adapter->rrd_ring = rrd_old;
|
|
adapter->tpd_ring = tpd_old;
|
|
adapter->ring_header = rhdr_old;
|
|
atl1_up(adapter);
|
|
return err;
|
|
}
|
|
|
|
static void atl1_get_pauseparam(struct net_device *netdev,
|
|
struct ethtool_pauseparam *epause)
|
|
{
|
|
struct atl1_adapter *adapter = netdev_priv(netdev);
|
|
struct atl1_hw *hw = &adapter->hw;
|
|
|
|
if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
|
|
hw->media_type == MEDIA_TYPE_1000M_FULL) {
|
|
epause->autoneg = AUTONEG_ENABLE;
|
|
} else {
|
|
epause->autoneg = AUTONEG_DISABLE;
|
|
}
|
|
epause->rx_pause = 1;
|
|
epause->tx_pause = 1;
|
|
}
|
|
|
|
static int atl1_set_pauseparam(struct net_device *netdev,
|
|
struct ethtool_pauseparam *epause)
|
|
{
|
|
struct atl1_adapter *adapter = netdev_priv(netdev);
|
|
struct atl1_hw *hw = &adapter->hw;
|
|
|
|
if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
|
|
hw->media_type == MEDIA_TYPE_1000M_FULL) {
|
|
epause->autoneg = AUTONEG_ENABLE;
|
|
} else {
|
|
epause->autoneg = AUTONEG_DISABLE;
|
|
}
|
|
|
|
epause->rx_pause = 1;
|
|
epause->tx_pause = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* FIXME: is this right? -- CHS */
|
|
static u32 atl1_get_rx_csum(struct net_device *netdev)
|
|
{
|
|
return 1;
|
|
}
|
|
|
|
static void atl1_get_strings(struct net_device *netdev, u32 stringset,
|
|
u8 *data)
|
|
{
|
|
u8 *p = data;
|
|
int i;
|
|
|
|
switch (stringset) {
|
|
case ETH_SS_STATS:
|
|
for (i = 0; i < ARRAY_SIZE(atl1_gstrings_stats); i++) {
|
|
memcpy(p, atl1_gstrings_stats[i].stat_string,
|
|
ETH_GSTRING_LEN);
|
|
p += ETH_GSTRING_LEN;
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int atl1_nway_reset(struct net_device *netdev)
|
|
{
|
|
struct atl1_adapter *adapter = netdev_priv(netdev);
|
|
struct atl1_hw *hw = &adapter->hw;
|
|
|
|
if (netif_running(netdev)) {
|
|
u16 phy_data;
|
|
atl1_down(adapter);
|
|
|
|
if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
|
|
hw->media_type == MEDIA_TYPE_1000M_FULL) {
|
|
phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN;
|
|
} else {
|
|
switch (hw->media_type) {
|
|
case MEDIA_TYPE_100M_FULL:
|
|
phy_data = MII_CR_FULL_DUPLEX |
|
|
MII_CR_SPEED_100 | MII_CR_RESET;
|
|
break;
|
|
case MEDIA_TYPE_100M_HALF:
|
|
phy_data = MII_CR_SPEED_100 | MII_CR_RESET;
|
|
break;
|
|
case MEDIA_TYPE_10M_FULL:
|
|
phy_data = MII_CR_FULL_DUPLEX |
|
|
MII_CR_SPEED_10 | MII_CR_RESET;
|
|
break;
|
|
default:
|
|
/* MEDIA_TYPE_10M_HALF */
|
|
phy_data = MII_CR_SPEED_10 | MII_CR_RESET;
|
|
}
|
|
}
|
|
atl1_write_phy_reg(hw, MII_BMCR, phy_data);
|
|
atl1_up(adapter);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
const struct ethtool_ops atl1_ethtool_ops = {
|
|
.get_settings = atl1_get_settings,
|
|
.set_settings = atl1_set_settings,
|
|
.get_drvinfo = atl1_get_drvinfo,
|
|
.get_wol = atl1_get_wol,
|
|
.set_wol = atl1_set_wol,
|
|
.get_msglevel = atl1_get_msglevel,
|
|
.set_msglevel = atl1_set_msglevel,
|
|
.get_regs_len = atl1_get_regs_len,
|
|
.get_regs = atl1_get_regs,
|
|
.get_ringparam = atl1_get_ringparam,
|
|
.set_ringparam = atl1_set_ringparam,
|
|
.get_pauseparam = atl1_get_pauseparam,
|
|
.set_pauseparam = atl1_set_pauseparam,
|
|
.get_rx_csum = atl1_get_rx_csum,
|
|
.set_tx_csum = ethtool_op_set_tx_hw_csum,
|
|
.get_link = ethtool_op_get_link,
|
|
.set_sg = ethtool_op_set_sg,
|
|
.get_strings = atl1_get_strings,
|
|
.nway_reset = atl1_nway_reset,
|
|
.get_ethtool_stats = atl1_get_ethtool_stats,
|
|
.get_sset_count = atl1_get_sset_count,
|
|
.set_tso = ethtool_op_set_tso,
|
|
};
|