linux_dsm_epyc7002/arch/mips/ar7/platform.c
Linus Torvalds 807249d3ad Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:
 "This is the main pull request for 4.3 for MIPS.  Here's the summary:

  Three fixes that didn't make 4.2-stable:

   - a -Os build might compile the kernel using the MIPS16 instruction
     set but the R2 optimized inline functions in <uapi/asm/swab.h> are
     implemented using 32-bit wide instructions which is invalid.

   - a build error in pgtable-bits.h for a particular kernel
     configuration.

   - accessing registers of the CM GCR might have been compiled to use
     64 bit accesses but these registers are onl 32 bit wide.

  And also a few new bits:

   - move the ATH79 GPIO driver to drivers/gpio

   - the definition of IRQCHIP_DECLARE has moved to linux/irqchip.h,
     change ATH79 accordingly.

   - fix definition of pgprot_writecombine

   - add an implementation of dma_map_ops.mmap

   - fix alignment of quiet build output for vmlinuz link

   - BCM47xx: Use kmemdup rather than duplicating its implementation

   - Netlogic: Fix 0x0x prefixes of constants.

   - merge Bjorn Helgaas' series to remove most of the weak keywords
     from function declarations.

   - CP0 and CP1 registers are best considered treated as unsigned
     values to avoid large values from becoming negative values.

   - improve support for the MIPS GIC timer.

   - enable common clock framework for Malta and SEAD3.

   - a number of improvments and fixes to dump_tlb().

   - document the MIPS TLB dump functionality in Magic SysRq.

   - Cavium Octeon CN68XX improvments.

   - NetLogic improvments.

   - irq: Use access helper irq_data_get_affinity_mask.

   - handle MSA unaligned accesses.

   - a number of R6-related math-emu fixes.

   - support for I6400.

   - improvments to MSA support.

   - add uprobes support.

   - move from deprecated __initcall to arch_initcall.

   - remove finish_arch_switch().

   - IRQ cleanups by Thomas Gleixner.

   - migrate to new 'set-state' interface.

   - random small cleanups"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (148 commits)
  MIPS: UAPI: Fix unrecognized opcode WSBH/DSBH/DSHD when using MIPS16.
  MIPS: Fix alignment of quiet build output for vmlinuz link
  MIPS: math-emu: Remove unused handle_dsemul function declaration
  MIPS: math-emu: Add support for the MIPS R6 MAX{, A} FPU instruction
  MIPS: math-emu: Add support for the MIPS R6 MIN{, A} FPU instruction
  MIPS: math-emu: Add support for the MIPS R6 CLASS FPU instruction
  MIPS: math-emu: Add support for the MIPS R6 RINT FPU instruction
  MIPS: math-emu: Add support for the MIPS R6 MSUBF FPU instruction
  MIPS: math-emu: Add support for the MIPS R6 MADDF FPU instruction
  MIPS: math-emu: Add support for the MIPS R6 SELNEZ FPU instruction
  MIPS: math-emu: Add support for the MIPS R6 SELEQZ FPU instruction
  MIPS: math-emu: Add support for the CMP.condn.fmt R6 instruction
  MIPS: inst.h: Add new MIPS R6 FPU opcodes
  MIPS: Octeon: Fix management port MII address on Kontron S1901
  MIPS: BCM47xx: Use kmemdup rather than duplicating its implementation
  STAGING: Octeon: Use common helpers for determining interface and port
  MIPS: Octeon: Support interfaces 4 and 5
  MIPS: Octeon: Set up 1:1 mapping between CN68XX PKO queues and ports
  MIPS: Octeon: Initialize CN68XX PKO
  STAGING: Octeon: Support CN68XX style WQE
  ...
2015-09-03 16:55:55 -07:00

732 lines
16 KiB
C

/*
* Copyright (C) 2006,2007 Felix Fietkau <nbd@openwrt.org>
* Copyright (C) 2006,2007 Eugene Konev <ejka@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/init.h>
#include <linux/types.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
#include <linux/serial.h>
#include <linux/serial_8250.h>
#include <linux/ioport.h>
#include <linux/io.h>
#include <linux/vlynq.h>
#include <linux/leds.h>
#include <linux/string.h>
#include <linux/etherdevice.h>
#include <linux/phy.h>
#include <linux/phy_fixed.h>
#include <linux/gpio.h>
#include <linux/clk.h>
#include <asm/addrspace.h>
#include <asm/mach-ar7/ar7.h>
#include <asm/mach-ar7/prom.h>
/*****************************************************************************
* VLYNQ Bus
****************************************************************************/
struct plat_vlynq_data {
struct plat_vlynq_ops ops;
int gpio_bit;
int reset_bit;
};
static int vlynq_on(struct vlynq_device *dev)
{
int ret;
struct plat_vlynq_data *pdata = dev->dev.platform_data;
ret = gpio_request(pdata->gpio_bit, "vlynq");
if (ret)
goto out;
ar7_device_reset(pdata->reset_bit);
ret = ar7_gpio_disable(pdata->gpio_bit);
if (ret)
goto out_enabled;
ret = ar7_gpio_enable(pdata->gpio_bit);
if (ret)
goto out_enabled;
ret = gpio_direction_output(pdata->gpio_bit, 0);
if (ret)
goto out_gpio_enabled;
msleep(50);
gpio_set_value(pdata->gpio_bit, 1);
msleep(50);
return 0;
out_gpio_enabled:
ar7_gpio_disable(pdata->gpio_bit);
out_enabled:
ar7_device_disable(pdata->reset_bit);
gpio_free(pdata->gpio_bit);
out:
return ret;
}
static void vlynq_off(struct vlynq_device *dev)
{
struct plat_vlynq_data *pdata = dev->dev.platform_data;
ar7_gpio_disable(pdata->gpio_bit);
gpio_free(pdata->gpio_bit);
ar7_device_disable(pdata->reset_bit);
}
static struct resource vlynq_low_res[] = {
{
.name = "regs",
.flags = IORESOURCE_MEM,
.start = AR7_REGS_VLYNQ0,
.end = AR7_REGS_VLYNQ0 + 0xff,
},
{
.name = "irq",
.flags = IORESOURCE_IRQ,
.start = 29,
.end = 29,
},
{
.name = "mem",
.flags = IORESOURCE_MEM,
.start = 0x04000000,
.end = 0x04ffffff,
},
{
.name = "devirq",
.flags = IORESOURCE_IRQ,
.start = 80,
.end = 111,
},
};
static struct resource vlynq_high_res[] = {
{
.name = "regs",
.flags = IORESOURCE_MEM,
.start = AR7_REGS_VLYNQ1,
.end = AR7_REGS_VLYNQ1 + 0xff,
},
{
.name = "irq",
.flags = IORESOURCE_IRQ,
.start = 33,
.end = 33,
},
{
.name = "mem",
.flags = IORESOURCE_MEM,
.start = 0x0c000000,
.end = 0x0cffffff,
},
{
.name = "devirq",
.flags = IORESOURCE_IRQ,
.start = 112,
.end = 143,
},
};
static struct plat_vlynq_data vlynq_low_data = {
.ops = {
.on = vlynq_on,
.off = vlynq_off,
},
.reset_bit = 20,
.gpio_bit = 18,
};
static struct plat_vlynq_data vlynq_high_data = {
.ops = {
.on = vlynq_on,
.off = vlynq_off,
},
.reset_bit = 16,
.gpio_bit = 19,
};
static struct platform_device vlynq_low = {
.id = 0,
.name = "vlynq",
.dev = {
.platform_data = &vlynq_low_data,
},
.resource = vlynq_low_res,
.num_resources = ARRAY_SIZE(vlynq_low_res),
};
static struct platform_device vlynq_high = {
.id = 1,
.name = "vlynq",
.dev = {
.platform_data = &vlynq_high_data,
},
.resource = vlynq_high_res,
.num_resources = ARRAY_SIZE(vlynq_high_res),
};
/*****************************************************************************
* Flash
****************************************************************************/
static struct resource physmap_flash_resource = {
.name = "mem",
.flags = IORESOURCE_MEM,
.start = 0x10000000,
.end = 0x107fffff,
};
static const char *ar7_probe_types[] = { "ar7part", NULL };
static struct physmap_flash_data physmap_flash_data = {
.width = 2,
.part_probe_types = ar7_probe_types,
};
static struct platform_device physmap_flash = {
.name = "physmap-flash",
.dev = {
.platform_data = &physmap_flash_data,
},
.resource = &physmap_flash_resource,
.num_resources = 1,
};
/*****************************************************************************
* Ethernet
****************************************************************************/
static struct resource cpmac_low_res[] = {
{
.name = "regs",
.flags = IORESOURCE_MEM,
.start = AR7_REGS_MAC0,
.end = AR7_REGS_MAC0 + 0x7ff,
},
{
.name = "irq",
.flags = IORESOURCE_IRQ,
.start = 27,
.end = 27,
},
};
static struct resource cpmac_high_res[] = {
{
.name = "regs",
.flags = IORESOURCE_MEM,
.start = AR7_REGS_MAC1,
.end = AR7_REGS_MAC1 + 0x7ff,
},
{
.name = "irq",
.flags = IORESOURCE_IRQ,
.start = 41,
.end = 41,
},
};
static struct fixed_phy_status fixed_phy_status __initdata = {
.link = 1,
.speed = 100,
.duplex = 1,
};
static struct plat_cpmac_data cpmac_low_data = {
.reset_bit = 17,
.power_bit = 20,
.phy_mask = 0x80000000,
};
static struct plat_cpmac_data cpmac_high_data = {
.reset_bit = 21,
.power_bit = 22,
.phy_mask = 0x7fffffff,
};
static u64 cpmac_dma_mask = DMA_BIT_MASK(32);
static struct platform_device cpmac_low = {
.id = 0,
.name = "cpmac",
.dev = {
.dma_mask = &cpmac_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &cpmac_low_data,
},
.resource = cpmac_low_res,
.num_resources = ARRAY_SIZE(cpmac_low_res),
};
static struct platform_device cpmac_high = {
.id = 1,
.name = "cpmac",
.dev = {
.dma_mask = &cpmac_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &cpmac_high_data,
},
.resource = cpmac_high_res,
.num_resources = ARRAY_SIZE(cpmac_high_res),
};
static void __init cpmac_get_mac(int instance, unsigned char *dev_addr)
{
char name[5], *mac;
sprintf(name, "mac%c", 'a' + instance);
mac = prom_getenv(name);
if (!mac && instance) {
sprintf(name, "mac%c", 'a');
mac = prom_getenv(name);
}
if (mac) {
if (!mac_pton(mac, dev_addr)) {
pr_warn("cannot parse mac address, using random address\n");
eth_random_addr(dev_addr);
}
} else
eth_random_addr(dev_addr);
}
/*****************************************************************************
* USB
****************************************************************************/
static struct resource usb_res[] = {
{
.name = "regs",
.flags = IORESOURCE_MEM,
.start = AR7_REGS_USB,
.end = AR7_REGS_USB + 0xff,
},
{
.name = "irq",
.flags = IORESOURCE_IRQ,
.start = 32,
.end = 32,
},
{
.name = "mem",
.flags = IORESOURCE_MEM,
.start = 0x03400000,
.end = 0x03401fff,
},
};
static struct platform_device ar7_udc = {
.name = "ar7_udc",
.resource = usb_res,
.num_resources = ARRAY_SIZE(usb_res),
};
/*****************************************************************************
* LEDs
****************************************************************************/
static struct gpio_led default_leds[] = {
{
.name = "status",
.gpio = 8,
.active_low = 1,
},
};
static struct gpio_led titan_leds[] = {
{ .name = "status", .gpio = 8, .active_low = 1, },
{ .name = "wifi", .gpio = 13, .active_low = 1, },
};
static struct gpio_led dsl502t_leds[] = {
{
.name = "status",
.gpio = 9,
.active_low = 1,
},
{
.name = "ethernet",
.gpio = 7,
.active_low = 1,
},
{
.name = "usb",
.gpio = 12,
.active_low = 1,
},
};
static struct gpio_led dg834g_leds[] = {
{
.name = "ppp",
.gpio = 6,
.active_low = 1,
},
{
.name = "status",
.gpio = 7,
.active_low = 1,
},
{
.name = "adsl",
.gpio = 8,
.active_low = 1,
},
{
.name = "wifi",
.gpio = 12,
.active_low = 1,
},
{
.name = "power",
.gpio = 14,
.active_low = 1,
.default_trigger = "default-on",
},
};
static struct gpio_led fb_sl_leds[] = {
{
.name = "1",
.gpio = 7,
},
{
.name = "2",
.gpio = 13,
.active_low = 1,
},
{
.name = "3",
.gpio = 10,
.active_low = 1,
},
{
.name = "4",
.gpio = 12,
.active_low = 1,
},
{
.name = "5",
.gpio = 9,
.active_low = 1,
},
};
static struct gpio_led fb_fon_leds[] = {
{
.name = "1",
.gpio = 8,
},
{
.name = "2",
.gpio = 3,
.active_low = 1,
},
{
.name = "3",
.gpio = 5,
},
{
.name = "4",
.gpio = 4,
.active_low = 1,
},
{
.name = "5",
.gpio = 11,
.active_low = 1,
},
};
static struct gpio_led gt701_leds[] = {
{
.name = "inet:green",
.gpio = 13,
.active_low = 1,
},
{
.name = "usb",
.gpio = 12,
.active_low = 1,
},
{
.name = "inet:red",
.gpio = 9,
.active_low = 1,
},
{
.name = "power:red",
.gpio = 7,
.active_low = 1,
},
{
.name = "power:green",
.gpio = 8,
.active_low = 1,
.default_trigger = "default-on",
},
{
.name = "ethernet",
.gpio = 10,
.active_low = 1,
},
};
static struct gpio_led_platform_data ar7_led_data;
static struct platform_device ar7_gpio_leds = {
.name = "leds-gpio",
.dev = {
.platform_data = &ar7_led_data,
}
};
static void __init detect_leds(void)
{
char *prid, *usb_prod;
/* Default LEDs */
ar7_led_data.num_leds = ARRAY_SIZE(default_leds);
ar7_led_data.leds = default_leds;
/* FIXME: the whole thing is unreliable */
prid = prom_getenv("ProductID");
usb_prod = prom_getenv("usb_prod");
/* If we can't get the product id from PROM, use the default LEDs */
if (!prid)
return;
if (strstr(prid, "Fritz_Box_FON")) {
ar7_led_data.num_leds = ARRAY_SIZE(fb_fon_leds);
ar7_led_data.leds = fb_fon_leds;
} else if (strstr(prid, "Fritz_Box_")) {
ar7_led_data.num_leds = ARRAY_SIZE(fb_sl_leds);
ar7_led_data.leds = fb_sl_leds;
} else if ((!strcmp(prid, "AR7RD") || !strcmp(prid, "AR7DB"))
&& usb_prod != NULL && strstr(usb_prod, "DSL-502T")) {
ar7_led_data.num_leds = ARRAY_SIZE(dsl502t_leds);
ar7_led_data.leds = dsl502t_leds;
} else if (strstr(prid, "DG834")) {
ar7_led_data.num_leds = ARRAY_SIZE(dg834g_leds);
ar7_led_data.leds = dg834g_leds;
} else if (strstr(prid, "CYWM") || strstr(prid, "CYWL")) {
ar7_led_data.num_leds = ARRAY_SIZE(titan_leds);
ar7_led_data.leds = titan_leds;
} else if (strstr(prid, "GT701")) {
ar7_led_data.num_leds = ARRAY_SIZE(gt701_leds);
ar7_led_data.leds = gt701_leds;
}
}
/*****************************************************************************
* Watchdog
****************************************************************************/
static struct resource ar7_wdt_res = {
.name = "regs",
.flags = IORESOURCE_MEM,
.start = -1, /* Filled at runtime */
.end = -1, /* Filled at runtime */
};
static struct platform_device ar7_wdt = {
.name = "ar7_wdt",
.resource = &ar7_wdt_res,
.num_resources = 1,
};
/*****************************************************************************
* Init
****************************************************************************/
static int __init ar7_register_uarts(void)
{
#ifdef CONFIG_SERIAL_8250
static struct uart_port uart_port __initdata;
struct clk *bus_clk;
int res;
memset(&uart_port, 0, sizeof(struct uart_port));
bus_clk = clk_get(NULL, "bus");
if (IS_ERR(bus_clk))
panic("unable to get bus clk");
uart_port.type = PORT_AR7;
uart_port.uartclk = clk_get_rate(bus_clk) / 2;
uart_port.iotype = UPIO_MEM32;
uart_port.regshift = 2;
uart_port.line = 0;
uart_port.irq = AR7_IRQ_UART0;
uart_port.mapbase = AR7_REGS_UART0;
uart_port.membase = ioremap(uart_port.mapbase, 256);
res = early_serial_setup(&uart_port);
if (res)
return res;
/* Only TNETD73xx have a second serial port */
if (ar7_has_second_uart()) {
uart_port.line = 1;
uart_port.irq = AR7_IRQ_UART1;
uart_port.mapbase = UR8_REGS_UART1;
uart_port.membase = ioremap(uart_port.mapbase, 256);
res = early_serial_setup(&uart_port);
if (res)
return res;
}
#endif
return 0;
}
static void __init titan_fixup_devices(void)
{
/* Set vlynq0 data */
vlynq_low_data.reset_bit = 15;
vlynq_low_data.gpio_bit = 14;
/* Set vlynq1 data */
vlynq_high_data.reset_bit = 16;
vlynq_high_data.gpio_bit = 7;
/* Set vlynq0 resources */
vlynq_low_res[0].start = TITAN_REGS_VLYNQ0;
vlynq_low_res[0].end = TITAN_REGS_VLYNQ0 + 0xff;
vlynq_low_res[1].start = 33;
vlynq_low_res[1].end = 33;
vlynq_low_res[2].start = 0x0c000000;
vlynq_low_res[2].end = 0x0fffffff;
vlynq_low_res[3].start = 80;
vlynq_low_res[3].end = 111;
/* Set vlynq1 resources */
vlynq_high_res[0].start = TITAN_REGS_VLYNQ1;
vlynq_high_res[0].end = TITAN_REGS_VLYNQ1 + 0xff;
vlynq_high_res[1].start = 34;
vlynq_high_res[1].end = 34;
vlynq_high_res[2].start = 0x40000000;
vlynq_high_res[2].end = 0x43ffffff;
vlynq_high_res[3].start = 112;
vlynq_high_res[3].end = 143;
/* Set cpmac0 data */
cpmac_low_data.phy_mask = 0x40000000;
/* Set cpmac1 data */
cpmac_high_data.phy_mask = 0x80000000;
/* Set cpmac0 resources */
cpmac_low_res[0].start = TITAN_REGS_MAC0;
cpmac_low_res[0].end = TITAN_REGS_MAC0 + 0x7ff;
/* Set cpmac1 resources */
cpmac_high_res[0].start = TITAN_REGS_MAC1;
cpmac_high_res[0].end = TITAN_REGS_MAC1 + 0x7ff;
}
static int __init ar7_register_devices(void)
{
void __iomem *bootcr;
u32 val;
int res;
res = ar7_register_uarts();
if (res)
pr_err("unable to setup uart(s): %d\n", res);
res = platform_device_register(&physmap_flash);
if (res)
pr_warn("unable to register physmap-flash: %d\n", res);
if (ar7_is_titan())
titan_fixup_devices();
ar7_device_disable(vlynq_low_data.reset_bit);
res = platform_device_register(&vlynq_low);
if (res)
pr_warn("unable to register vlynq-low: %d\n", res);
if (ar7_has_high_vlynq()) {
ar7_device_disable(vlynq_high_data.reset_bit);
res = platform_device_register(&vlynq_high);
if (res)
pr_warn("unable to register vlynq-high: %d\n", res);
}
if (ar7_has_high_cpmac()) {
res = fixed_phy_add(PHY_POLL, cpmac_high.id,
&fixed_phy_status, -1);
if (!res) {
cpmac_get_mac(1, cpmac_high_data.dev_addr);
res = platform_device_register(&cpmac_high);
if (res)
pr_warn("unable to register cpmac-high: %d\n",
res);
} else
pr_warn("unable to add cpmac-high phy: %d\n", res);
} else
cpmac_low_data.phy_mask = 0xffffffff;
res = fixed_phy_add(PHY_POLL, cpmac_low.id, &fixed_phy_status, -1);
if (!res) {
cpmac_get_mac(0, cpmac_low_data.dev_addr);
res = platform_device_register(&cpmac_low);
if (res)
pr_warn("unable to register cpmac-low: %d\n", res);
} else
pr_warn("unable to add cpmac-low phy: %d\n", res);
detect_leds();
res = platform_device_register(&ar7_gpio_leds);
if (res)
pr_warn("unable to register leds: %d\n", res);
res = platform_device_register(&ar7_udc);
if (res)
pr_warn("unable to register usb slave: %d\n", res);
/* Register watchdog only if enabled in hardware */
bootcr = ioremap_nocache(AR7_REGS_DCL, 4);
val = readl(bootcr);
iounmap(bootcr);
if (val & AR7_WDT_HW_ENA) {
if (ar7_has_high_vlynq())
ar7_wdt_res.start = UR8_REGS_WDT;
else
ar7_wdt_res.start = AR7_REGS_WDT;
ar7_wdt_res.end = ar7_wdt_res.start + 0x20;
res = platform_device_register(&ar7_wdt);
if (res)
pr_warn("unable to register watchdog: %d\n", res);
}
return 0;
}
device_initcall(ar7_register_devices);