Hebbar, Gururaja cd587096c0 mmc: omap_hsmmc: Enable HSPE bit for high speed cards ... HSMMC IP on AM33xx need a special setting to handle High-speed cards. Other platforms like TI81xx, OMAP4 may need this as-well. This depends on the HSMMC IP timing closure done for the high speed cards. From AM335x TRM (SPRUH73F - 18.3.12 Output Signals Generation): The MMC/SD/SDIO output signals can be driven on either falling edge or rising edge depending on the SD_HCTL[2] HSPE bit. This feature allows to reach better timing performance, and thus to increase data transfer frequency. There are few pre-requisites for enabling the HSPE bit - Controller should support High-Speed-Enable Bit and - Controller should not be using DDR Mode and - Controller should advertise that it supports High Speed in capabilities register and - MMC/SD clock coming out of controller > 25MHz Signed-off-by: Hebbar, Gururaja <gururaja.hebbar@ti.com> Signed-off-by: Venkatraman S <svenkatr@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>		2012-12-06 13:54:56 -05:00
..
card	mmc: card: Add RPMB support in IOCTL interface	2012-12-06 13:54:49 -05:00
core	mmc: core: Add mmc_set_blockcount feature	2012-12-06 13:54:48 -05:00
host	mmc: omap_hsmmc: Enable HSPE bit for high speed cards	2012-12-06 13:54:56 -05:00
Kconfig	mmc: explicitly mention SDIO support in Kconfig	2008-10-12 11:04:36 +02:00
Makefile	mmc: sdhci-pci: add platform data	2012-01-11 23:58:47 -05:00